-
Monitoring the evolution of dimensional accuracy and product properties in property-controlled forming processes
Authors:
Sophie Charlotte Stebner,
Juri Martschin,
Bahman Arian,
Stefan Dietrich,
Martin Feistle,
Sebastian Hütter,
Rémi Lafarge,
Robert Laue,
Xinyang Li,
Christopher Schulte,
Daniel Spies,
Ferdinand Thein,
Frank Wendler,
Malte Wrobel,
Julian Rozo Vasquez,
Michael Dölz,
Sebastian Münstermann
Abstract:
As recent trends in manufacturing engineering disciplines show a clear development in the sustainable as well as economically efficient design of forming processes, monitoring techniques have been gaining in relevance. In terms of monitoring of product properties, most processes are currently open-loop controlled, entailing that the microstructure evolution, which determines the final product prop…
▽ More
As recent trends in manufacturing engineering disciplines show a clear development in the sustainable as well as economically efficient design of forming processes, monitoring techniques have been gaining in relevance. In terms of monitoring of product properties, most processes are currently open-loop controlled, entailing that the microstructure evolution, which determines the final product properties, is not considered. However, a closed-loop control that can adjust and manipulate the process actuators according to the required product properties of the component will lead to a considerable increase in efficiency of the processes regarding resources and will decrease postproduction of the component. For most forming processes, one set of component dimensions will result in a certain set of product properties. However, to successfully establish closed-loop property controls for the processes, a systematic understanding of the reciprocity of the dimensions after forming and final product properties must be established. This work investigates the evolution of dimensional accuracy as well as product properties for a series of forming processes that utilize different degrees of freedom for process control.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
A new series of large sets of subspace designs over the binary field
Authors:
Michael Kiermaier,
Reinhard Laue,
Alfred Wassermann
Abstract:
In this article, we show the existence of large sets $\operatorname{LS}_2[3](2,k,v)$ for infinitely many values of $k$ and $v$. The exact condition is $v \geq 8$ and $0 \leq k \leq v$ such that for the remainders $\bar{v}$ and $\bar{k}$ of $v$ and $k$ modulo $6$ we have $2 \leq \bar{v} < \bar{k} \leq 5$.
The proof is constructive and consists of two parts. First, we give a computer construction…
▽ More
In this article, we show the existence of large sets $\operatorname{LS}_2[3](2,k,v)$ for infinitely many values of $k$ and $v$. The exact condition is $v \geq 8$ and $0 \leq k \leq v$ such that for the remainders $\bar{v}$ and $\bar{k}$ of $v$ and $k$ modulo $6$ we have $2 \leq \bar{v} < \bar{k} \leq 5$.
The proof is constructive and consists of two parts. First, we give a computer construction for an $\operatorname{LS}_2[3](2,4,8)$, which is a partition of the set of all $4$-dimensional subspaces of an $8$-dimensional vector space over the binary field into three disjoint $2$-$(8, 4, 217)_2$ subspace designs. Together with the already known $\operatorname{LS}_2[3](2,3,8)$, the application of a recursion method based on a decomposition of the Graßmannian into joins yields a construction for the claimed large sets.
△ Less
Submitted 22 March, 2016;
originally announced March 2016.
-
Large sets of subspace designs
Authors:
Michael Braun,
Michael Kiermaier,
Axel Kohnert,
Reinhard Laue
Abstract:
In this article, three types of joins are introduced for subspaces of a vector space. Decompositions of the Graßmannian into joins are discussed. This framework admits a generalization of large set recursion methods for block designs to subspace designs.
We construct a $2$-$(6,3,78)_5$ design by computer, which corresponds to a halving $\operatorname{LS}_5[2](2,3,6)$. The application of the new…
▽ More
In this article, three types of joins are introduced for subspaces of a vector space. Decompositions of the Graßmannian into joins are discussed. This framework admits a generalization of large set recursion methods for block designs to subspace designs.
We construct a $2$-$(6,3,78)_5$ design by computer, which corresponds to a halving $\operatorname{LS}_5[2](2,3,6)$. The application of the new recursion method to this halving and an already known $\operatorname{LS}_3[2](2,3,6)$ yields two infinite two-parameter series of halvings $\operatorname{LS}_3[2](2,k,v)$ and $\operatorname{LS}_5[2](2,k,v)$ with integers $v\geq 6$, $v\equiv 2\mod 4$ and $3\leq k\leq v-3$, $k\equiv 3\mod 4$.
Thus in particular, two new infinite series of nontrivial subspace designs with $t = 2$ are constructed. Furthermore as a corollary, we get the existence of infinitely many nontrivial large sets of subspace designs with $t = 2$.
△ Less
Submitted 16 February, 2016; v1 submitted 26 November, 2014;
originally announced November 2014.
-
Derived and Residual Subspace Designs
Authors:
Michael Kiermaier,
Reinhard Laue
Abstract:
A generalization of forming derived and residual designs from $t$-designs to subspace designs is proposed. A $q$-analog of a theorem by Van Trung, van Leijenhorst and Driessen is proven, stating that if for some (not necessarily realizable) parameter set the derived and residual parameter set are realizable, the same is true for the reduced parameter set.
As a result, we get the existence of sev…
▽ More
A generalization of forming derived and residual designs from $t$-designs to subspace designs is proposed. A $q$-analog of a theorem by Van Trung, van Leijenhorst and Driessen is proven, stating that if for some (not necessarily realizable) parameter set the derived and residual parameter set are realizable, the same is true for the reduced parameter set.
As a result, we get the existence of several previously unknown subspace designs. Some consequences are derived for the existence of large sets of subspace designs. Furthermore, it is shown that there is no $q$-analog of the large Witt design.
△ Less
Submitted 21 May, 2014;
originally announced May 2014.
-
Optimized Implementation of Elliptic Curve Based Additive Homomorphic Encryption for Wireless Sensor Networks
Authors:
Osman Ugus,
Dirk Westhoff,
Ralf Laue,
Abdulhadi Shoufan,
Sorin A. Huss
Abstract:
When deploying wireless sensor networks (WSNs) in public environments it may become necessary to secure their data storage and transmission against possible attacks such as node-compromise and eavesdrop**. The nodes feature only small computational and energy resources, thus requiring efficient algorithms. As a solution for this problem the TinyPEDS approach was proposed in [7], which utilizes…
▽ More
When deploying wireless sensor networks (WSNs) in public environments it may become necessary to secure their data storage and transmission against possible attacks such as node-compromise and eavesdrop**. The nodes feature only small computational and energy resources, thus requiring efficient algorithms. As a solution for this problem the TinyPEDS approach was proposed in [7], which utilizes the Elliptic Curve ElGamal (EC-ElGamal) cryptosystem for additive homomorphic encryption allowing concealed data aggregation. This work presents an optimized implementation of EC-ElGamal on a MicaZ mote, which is a typical sensor node platform with 8-bit processor for WSNs. Compared to the best previous result, our implementation is at least 44% faster for fixed-point multiplication. Because most parts of the algorithm are similar to standard Elliptic Curve algorithms, the results may be reused in other realizations on constrained devices as well.
△ Less
Submitted 23 March, 2009;
originally announced March 2009.
-
Bounds for the minimum diameter of integral point sets
Authors:
Sascha Kurz,
Reinhard Laue
Abstract:
Geometrical objects with integral sides have attracted mathematicians for ages. For example, the problem to prove or to disprove the existence of a perfect box, that is, a rectangular parallelepiped with all edges, face diagonals and space diagonals of integer lengths, remains open. More generally an integral point set $\mathcal{P}$ is a set of $n$ points in the $m$-dimensional Euclidean space…
▽ More
Geometrical objects with integral sides have attracted mathematicians for ages. For example, the problem to prove or to disprove the existence of a perfect box, that is, a rectangular parallelepiped with all edges, face diagonals and space diagonals of integer lengths, remains open. More generally an integral point set $\mathcal{P}$ is a set of $n$ points in the $m$-dimensional Euclidean space $\mathbb{E}^m$ with pairwise integral distances where the largest occurring distance is called its diameter. From the combinatorial point of view there is a natural interest in the determination of the smallest possible diameter $d(m,n)$ for given parameters $m$ and $n$. We give some new upper bounds for the minimum diameter $d(m,n)$ and some exact values.
△ Less
Submitted 9 November, 2019; v1 submitted 8 April, 2008;
originally announced April 2008.
