-
Machine-learning-enhanced time-of-flight mass spectrometry analysis
Authors:
Ye Wei,
Rama Srinivas Varanasi,
Torsten Schwarz,
Leonie Gomell,
Huan Zhao,
David J. Larson,
Binhan Sun,
Geng Liu,
Hao Chen,
Dierk Raabe,
Baptiste Gault
Abstract:
Mass spectrometry is a widespread approach to work out what are the constituents of a material. Atoms and molecules are removed from the material and collected, and subsequently, a critical step is to infer their correct identities based from patterns formed in their mass-to-charge ratios and relative isotopic abundances. However, this identification step still mainly relies on individual user's e…
▽ More
Mass spectrometry is a widespread approach to work out what are the constituents of a material. Atoms and molecules are removed from the material and collected, and subsequently, a critical step is to infer their correct identities based from patterns formed in their mass-to-charge ratios and relative isotopic abundances. However, this identification step still mainly relies on individual user's expertise, making its standardization challenging, and hindering efficient data processing. Here, we introduce an approach that leverages modern machine learning technique to identify peak patterns in time-of-flight mass spectra within microseconds, outperforming human users without loss of accuracy. Our approach is cross-validated on mass spectra generated from different time-of-flight mass spectrometry(ToF-MS) techniques, offering the ToF-MS community an open-source, intelligent mass spectra analysis.
△ Less
Submitted 2 October, 2020;
originally announced October 2020.
-
Simulation of Heterogeneous Atom Probe Tip Shapes Evolution during Field Evaporation Using a Level Set Method and Different Evaporation Models
Authors:
Zhijie Xu,
Dongsheng Li,
Wei Xu,
Arun Devaraj,
Robert Colby,
Suntharampillai Thevuthasan,
B. P. Geiser,
D. J. Larson
Abstract:
In atom probe tomography (APT), accurate reconstruction of the spatial positions of field evaporated ions from measured detector patterns depends upon a correct understanding of the dynamic tip shape evolution and evaporation laws of component atoms. Artifacts in APT reconstructions of heterogeneous materials can be attributed to the assumption of homogeneous evaporation of all the elements in the…
▽ More
In atom probe tomography (APT), accurate reconstruction of the spatial positions of field evaporated ions from measured detector patterns depends upon a correct understanding of the dynamic tip shape evolution and evaporation laws of component atoms. Artifacts in APT reconstructions of heterogeneous materials can be attributed to the assumption of homogeneous evaporation of all the elements in the material in addition to the assumption of a steady state hemispherical dynamic tip shape evolution. A level set method based specimen shape evolution model is developed in this study to simulate the evaporation of synthetic layered-structured APT tips. The simulation results of the shape evolution by the level set model qualitatively agree with the finite element method and the literature data using the finite difference method. The asymmetric evolving shape predicted by the level set model demonstrates the complex evaporation behavior of heterogeneous tip and the interface curvature can potentially lead to the artifacts in the APT reconstruction of such materials. Compared with other APT simulation methods, the new method provides smoother interface representation with the aid of the intrinsic sub-grid accuracy. Two evaporation models (linear and exponential evaporation laws) are implemented in the level set simulations and the effect of evaporation laws on the tip shape evolution is also presented.
△ Less
Submitted 30 August, 2018;
originally announced August 2018.
-
Atom Probe Tomography Spatial Reconstruction: Status and Directions
Authors:
David J. Larson,
Baptiste Gault,
Brian P. Geiser,
Frederic De Geuser,
F. Vurpillot
Abstract:
In this review we present an overview of the current atom probe tomography spatial data reconstruction paradigm, and explore some of potential routes to improve the current methodology in order to yield a more accurate representation of nanoscale microstructure. Many of these potential improvement methods are directly tied to extensive application of advanced numerical methods, which are also very…
▽ More
In this review we present an overview of the current atom probe tomography spatial data reconstruction paradigm, and explore some of potential routes to improve the current methodology in order to yield a more accurate representation of nanoscale microstructure. Many of these potential improvement methods are directly tied to extensive application of advanced numerical methods, which are also very briefly reviewed. We have described effects resulting from the application of the standard model and then introduced several potential improvements, first in the far field, and, second, in the near field. The issues encountered in both cases are quite different but ultimately they combine to determine the spatial resolution of the technique.
△ Less
Submitted 9 October, 2015;
originally announced October 2015.
-
Imposed Magnetic Field and Hot Electron Propagation in Inertial Fusion Hohlraums
Authors:
D. J. Strozzi,
L. J. Perkins,
M. M. Marinak,
D. J. Larson,
J. M. Koning,
B. G. Logan
Abstract:
The effects of an imposed, axial magnetic field $B_{z0}$ on hydrodynamics and energetic electrons in inertial confinement fusion (ICF) indirect-drive hohlraums are studied. We present simulations from the radiation-hydrodynamics code HYDRA of a low-adiabat ignition design for the National Ignition Facility (NIF), with and without $B_{z0}=70$ Tesla. The field's main hydrodynamic effect is to signif…
▽ More
The effects of an imposed, axial magnetic field $B_{z0}$ on hydrodynamics and energetic electrons in inertial confinement fusion (ICF) indirect-drive hohlraums are studied. We present simulations from the radiation-hydrodynamics code HYDRA of a low-adiabat ignition design for the National Ignition Facility (NIF), with and without $B_{z0}=70$ Tesla. The field's main hydrodynamic effect is to significantly reduce electron thermal conduction perpendicular to the field. This results in hotter and less dense plasma on the equator between the capsule and hohlraum wall. The inner laser beams experience less inverse bremsstrahlung absorption before reaching the wall. The x-ray drive is thus stronger from the equator with the imposed field. We study superthermal, or "hot," electron dynamics with the particle-in-cell code ZUMA, using plasma conditions from HYDRA. During the early-time laser picket, hot electrons based on two-plasmon decay in the laser entrance hole (Regan et al., Phys. Plasmas 2010) are guided to the capsule by a 70 T field. 12x more energy deposits in the deuterium-tritium (DT) fuel. For plasma conditions early in peak laser power, we present mono-energetic test-case studies with ZUMA, as well as sources based on inner-beam stimulated Raman scattering. The effect of the field on DT deposition depends strongly on the source location, namely whether hot electrons are generated on field lines that connect to the capsule.
△ Less
Submitted 8 October, 2015; v1 submitted 4 August, 2015;
originally announced August 2015.
-
On the roles of graphene oxide do** for enhanced supercurrent in MgB2 based superconductors
Authors:
W. K. Yeoh,
X. Y. Cui,
B. Gault,
K. S. B. De Silva,
X. Xu,
H. W. Liu,
H. W. Yen,
D. Wong,
P. Bao,
D. J. Larson,
I. Martin,
W. X. Li,
R. K. Zheng,
X. L. Wang,
S. X. Dou,
S. P. Ringer
Abstract:
Due to their graphene-like properties after oxygen reduction, incorporation of graphene oxide (GO) sheets into correlated-electron materials offers a new pathway for tailoring their properties. Fabricating GO nanocomposites with polycrystalline MgB2 superconductors leads to an order of magnitude enhancement of the supercurrent at 5 K/8 T and 20 K/4 T. Herein, we introduce a novel experimental appr…
▽ More
Due to their graphene-like properties after oxygen reduction, incorporation of graphene oxide (GO) sheets into correlated-electron materials offers a new pathway for tailoring their properties. Fabricating GO nanocomposites with polycrystalline MgB2 superconductors leads to an order of magnitude enhancement of the supercurrent at 5 K/8 T and 20 K/4 T. Herein, we introduce a novel experimental approach to overcome the formidable challenge of performing quantitative microscopy and microanalysis of such composites, so as to unveil how GO do** influences the structure and hence the material properties. Atom probe microscopy and electron microscopy were used to directly image the GO within the MgB2, and we combined these data with computational simulations to derive the property-enhancing mechanisms. Our results reveal synergetic effects of GO, namely, via localized atomic (carbon and oxygen) do** as well as texturing of the crystals, which provide both inter and intra granular flux pinning. This study opens up new insights into how low-dimensional nanostructures can be integrated into composites to modify the overall properties, using a methodology amenable to a wide range of applications.
△ Less
Submitted 19 May, 2014;
originally announced May 2014.
-
Fast-ignition design transport studies: realistic electron source, integrated PIC-hydrodynamics, imposed magnetic fields
Authors:
D. J. Strozzi,
M. Tabak,
D. J. Larson,
L. Divol,
A. J. Kemp,
C. Bellei,
M. M. Marinak,
M. H. Key
Abstract:
Transport modeling of idealized, cone-guided fast ignition targets indicates the severe challenge posed by fast-electron source divergence. The hybrid particle-in-cell [PIC] code Zuma is run in tandem with the radiation-hydrodynamics code Hydra to model fast-electron propagation, fuel heating, and thermonuclear burn. The fast electron source is based on a 3D explicit-PIC laser-plasma simulation wi…
▽ More
Transport modeling of idealized, cone-guided fast ignition targets indicates the severe challenge posed by fast-electron source divergence. The hybrid particle-in-cell [PIC] code Zuma is run in tandem with the radiation-hydrodynamics code Hydra to model fast-electron propagation, fuel heating, and thermonuclear burn. The fast electron source is based on a 3D explicit-PIC laser-plasma simulation with the PSC code. This shows a quasi two-temperature energy spectrum, and a divergent angle spectrum (average velocity-space polar angle of 52 degrees). Transport simulations with the PIC-based divergence do not ignite for > 1 MJ of fast-electron energy, for a modest 70 micron standoff distance from fast-electron injection to the dense fuel. However, artificially collimating the source gives an ignition energy of 132 kJ. To mitigate the divergence, we consider imposed axial magnetic fields. Uniform fields ~50 MG are sufficient to recover the artificially collimated ignition energy. Experiments at the Omega laser facility have generated fields of this magnitude by imploding a capsule in seed fields of 50-100 kG. Such imploded fields are however more compressed in the transport region than in the laser absorption region. When fast electrons encounter increasing field strength, magnetic mirroring can reflect a substantial fraction of them and reduce coupling to the fuel. A hollow magnetic pipe, which peaks at a finite radius, is presented as one field configuration which circumvents mirroring.
△ Less
Submitted 8 May, 2012;
originally announced May 2012.
-
Cone-Guided Fast Ignition with no Imposed Magnetic Fields
Authors:
D. J. Strozzi,
M. Tabak,
D. J. Larson,
M. M. Marinak,
M. H. Key,
L. Divol,
A. J. Kemp,
C. Bellei,
H. D. Shay
Abstract:
Simulations of ignition-scale fast ignition targets have been performed with the new integrated Zuma-Hydra PIC-hydrodynamic capability. We consider an idealized spherical DT fuel assembly with a carbon cone, and an artificially-collimated fast electron source. We study the role of E and B fields and the fast electron energy spectrum. For mono-energetic 1.5 MeV fast electrons, without E and B field…
▽ More
Simulations of ignition-scale fast ignition targets have been performed with the new integrated Zuma-Hydra PIC-hydrodynamic capability. We consider an idealized spherical DT fuel assembly with a carbon cone, and an artificially-collimated fast electron source. We study the role of E and B fields and the fast electron energy spectrum. For mono-energetic 1.5 MeV fast electrons, without E and B fields, the energy needed for ignition is E_f^{ig} = 30 kJ. This is about 3.5x the minimal deposited ignition energy of 8.7 kJ for our fuel density of 450 g/cm^3. Including E and B fields with the resistive Ohm's law E = ηJ_b gives E_f^{ig} = 20 kJ, while using the full Ohm's law gives E_f^{ig} > 40 kJ. This is due to magnetic self-guiding in the former case, and \nabla n \times \nabla T magnetic fields in the latter. Using a realistic, quasi two-temperature energy spectrum derived from PIC laser-plasma simulations increases E_f^{ig} to (102, 81, 162) kJ for (no E/B, E = ηJ_b, full Ohm's law). This stems from the electrons being too energetic to fully stop in the optimal hot spot depth.
△ Less
Submitted 10 September, 2012; v1 submitted 21 November, 2011;
originally announced November 2011.
