-
Layer group classification of two-dimensional materials
Authors:
**gheng Fu,
Mikael Kuisma,
Ask Hjorth Larsen,
Kohei Shinohara,
Atsushi Togo,
Kristian S. Thygesen
Abstract:
The symmetry of a crystal structure with a three-dimensional (3D) lattice can be classified by one of the 230 space group types. For some types of crystals, e.g. crystalline films, surfaces, or planar interfaces, it is more appropriate to assume a 2D lattice. With this assumption, the structure can be classified by one of the 80 layer group types. We have implemented an algorithm to determine the…
▽ More
The symmetry of a crystal structure with a three-dimensional (3D) lattice can be classified by one of the 230 space group types. For some types of crystals, e.g. crystalline films, surfaces, or planar interfaces, it is more appropriate to assume a 2D lattice. With this assumption, the structure can be classified by one of the 80 layer group types. We have implemented an algorithm to determine the layer group type of a 3D structure with a 2D lattice, and applied it to more than 15,000 monolayer structures in the Computational 2D Materials (C2DB) database. We compare the classification of monolayers by layer groups and space groups, respectively. The latter is defined as the space group of the 3D bulk structure obtained by repeating the monolayer periodically in the direction perpendicular to the 2D lattice (AA-stacking). By this correspondence, nine pairs of layer group types are mapped to the same space group type due to the inability of the space group to distinguish the in-plane and out-of-plane axes. In total 18% of the monolayers in the C2DB belong to one of these layer group pairs and are thus not properly classified by the space group type.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Fitting multiple small-angle scattering datasets simultaneously: on the optimal use of priors and weights
Authors:
Andreas Haahr Larsen
Abstract:
Small-angle X-ray and neutron scattering (SAXS and SANS) are powerful techniques for elucidating the structure of diverse particles and materials. This study address the challenge of effectively combining SAXS and SANS data for accurate structural parameter determination. Surprisingly, our results demonstrate that equally weighting all data points leads to the most accurate parameter estimation, e…
▽ More
Small-angle X-ray and neutron scattering (SAXS and SANS) are powerful techniques for elucidating the structure of diverse particles and materials. This study address the challenge of effectively combining SAXS and SANS data for accurate structural parameter determination. Surprisingly, our results demonstrate that equally weighting all data points leads to the most accurate parameter estimation, even when SAXS data significantly outnumber SANS data. We compared this approach with weighting schemes normalized by the number of points and by the derived information content. Furthermore, we assessed the impact of prior knowledge by incorporating Gaussian priors for model parameters. Our findings indicate that Gaussian priors improve the accuracy of refined parameter values compared to uniform priors. When using a minimum and a maximum values for model parameters, which is common practice, uniform priors are implicitely applied. Finally, we show that utilizing information content aids in determining the degrees of freedom, enabling accurate calculation of the goodness of fit. In conclusion, this research provides valuable insights into the optimal combination of SAXS and SANS data, emphasizing the importance of weighting schemes and prior knowledge for enhanced accuracy in structural parameter determination.
△ Less
Submitted 10 November, 2023;
originally announced November 2023.
-
GPAW: An open Python package for electronic-structure calculations
Authors:
Jens Jørgen Mortensen,
Ask Hjorth Larsen,
Mikael Kuisma,
Aleksei V. Ivanov,
Alireza Taghizadeh,
Andrew Peterson,
Anubhab Haldar,
Asmus Ougaard Dohn,
Christian Schäfer,
Elvar Örn Jónsson,
Eric D. Hermes,
Fredrik Andreas Nilsson,
Georg Kastlunger,
Gianluca Levi,
Hannes Jónsson,
Hannu Häkkinen,
Jakub Fojt,
Jiban Kangsabanik,
Joachim Sødequist,
Jouko Lehtomäki,
Julian Heske,
Jussi Enkovaara,
Kirsten Trøstrup Winther,
Marcin Dulak,
Marko M. Melander
, et al. (22 additional authors not shown)
Abstract:
We review the GPAW open-source Python package for electronic structure calculations. GPAW is based on the projector-augmented wave method and can solve the self-consistent density functional theory (DFT) equations using three different wave-function representations, namely real-space grids, plane waves, and numerical atomic orbitals. The three representations are complementary and mutually indepen…
▽ More
We review the GPAW open-source Python package for electronic structure calculations. GPAW is based on the projector-augmented wave method and can solve the self-consistent density functional theory (DFT) equations using three different wave-function representations, namely real-space grids, plane waves, and numerical atomic orbitals. The three representations are complementary and mutually independent and can be connected by transformations via the real-space grid. This multi-basis feature renders GPAW highly versatile and unique among similar codes. By virtue of its modular structure, the GPAW code constitutes an ideal platform for implementation of new features and methodologies. Moreover, it is well integrated with the Atomic Simulation Environment (ASE) providing a flexible and dynamic user interface. In addition to ground-state DFT calculations, GPAW supports many-body GW band structures, optical excitations from the Bethe-Salpeter Equation (BSE), variational calculations of excited states in molecules and solids via direct optimization, and real-time propagation of the Kohn-Sham equations within time-dependent DFT. A range of more advanced methods to describe magnetic excitations and non-collinear magnetism in solids are also now available. In addition, GPAW can calculate non-linear optical tensors of solids, charged crystal point defects, and much more. Recently, support of GPU acceleration has been achieved with minor modifications of the GPAW code thanks to the CuPy library. We end the review with an outlook describing some future plans for GPAW.
△ Less
Submitted 16 April, 2024; v1 submitted 23 October, 2023;
originally announced October 2023.
-
Shape2SAS -- a web application to simulate small-angle scattering data and pair distance distributions from user-defined shapes
Authors:
Andreas Haahr Larsen,
Emre Brookes,
Martin Cramer Pedersen,
Jacob Judas Kain Kirkensgaard
Abstract:
Shape2SAS is a web application that allows researchers and students to build intuition and understanding of small-angle scattering. It is available at https://somo.chem.utk.edu/shape2sas. The user defines a model of arbitrary shape by combining geometrical subunits, and Shape2SAS then calculates and displays the scattering intensity, the pair distance distribution as well as a visualization of the…
▽ More
Shape2SAS is a web application that allows researchers and students to build intuition and understanding of small-angle scattering. It is available at https://somo.chem.utk.edu/shape2sas. The user defines a model of arbitrary shape by combining geometrical subunits, and Shape2SAS then calculates and displays the scattering intensity, the pair distance distribution as well as a visualization of the user-defined shape. Simulated data with realistic noise are also generated. We demonstrate how Shape2SAS can calculate and display the different scattering patterns for various geometrical shapes, such as spheres and cylinders. We also demonstrate how the effect of structure factors can be visualized. Finally, we show how multi-contrast particles can readily be generated, and how the calculated scattering may be used to validate and visualize analytical models generated in analysis software for fitting small-angle scattering data.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
A basic electro-topological descriptor for the prediction of organic molecule geometries by simple machine learning
Authors:
Carlos Manuel de Armas-Morejón,
Ask Hjorth Larsen,
Luis A. Montero-Cabrera,
Angel Rubio,
Joaquim Jornet-Somoza
Abstract:
This paper proposes a machine learning (ML) method to predict stable molecular geometries from their chemical composition. The method is useful for generating molecular conformations which may serve as initial geometries for saving time during expensive structure optimizations by quantum mechanical calculations of large molecules. Conformations are found by predicting the local arrangement around…
▽ More
This paper proposes a machine learning (ML) method to predict stable molecular geometries from their chemical composition. The method is useful for generating molecular conformations which may serve as initial geometries for saving time during expensive structure optimizations by quantum mechanical calculations of large molecules. Conformations are found by predicting the local arrangement around each atom in the molecule after trained from a database of previously optimized small molecules. It works by dividing each molecule in the database into minimal building blocks of different type. The algorithm is then trained to predict bond lengths and angles for each type of building block using an electro-topological fingerprint as descriptor. A conformation is then generated by joining the predicted blocks. Our model is able to give promising results for optimized molecular geometries from the basic knowledge of the chemical formula and connectivity. The method trends to reproduce interatomic distances within test blocks with RMSD under $0.05$ Å
△ Less
Submitted 19 October, 2022;
originally announced October 2022.
-
Specific interactions of peripheral membrane proteins with lipids: what can molecular simulations show us?
Authors:
Andreas Haahr Larsen,
Laura H. John,
Mark S. P. Sansom,
Robin A. Corey
Abstract:
Peripheral membrane proteins can reversibly and specifically bind to biological membranes to carry out functions such as cell signalling, enzymatic activity, or membrane remodelling. Structures of these proteins and of their lipid-binding domains are typically solved in a soluble form, sometimes with a lipid or lipid headgroup at the binding site. To provide a detailed molecular view of peripheral…
▽ More
Peripheral membrane proteins can reversibly and specifically bind to biological membranes to carry out functions such as cell signalling, enzymatic activity, or membrane remodelling. Structures of these proteins and of their lipid-binding domains are typically solved in a soluble form, sometimes with a lipid or lipid headgroup at the binding site. To provide a detailed molecular view of peripheral membrane protein interactions with the membrane, computational methods such as molecular dynamics (MD) simulations can be applied. Here, we outline recent attempts to characterise these binding interactions, focusing on both intracellular proteins such as PIP-binding domains, and on extracellular proteins such as glycolipid-binding bacterial exotoxins. We compare methods to identify and analyse lipid binding sites from simulation data. We highlight recent work characterising the energetics of these interactions using free energy calculations. We describe how improvements in methodologies and computing power will help MD simulations to continue to contribute to this field in the future.
△ Less
Submitted 1 February, 2022;
originally announced February 2022.
-
Spread balanced Wannier functions: Robust and automatable orbital localization
Authors:
Pietro F. Fontana,
Ask H. Larsen,
Thomas Olsen,
Kristian S. Thygesen
Abstract:
We introduce a new type of Wannier functions (WFs) obtained by minimizing the conventional spread functional with a penalty term proportional to the variance of the spread distribution. This modified Wannierisation scheme is less prone to produce ineffective solutions featuring one or several poorly localized orbitals, making it well suited for complex systems or high-throughput applications. Furt…
▽ More
We introduce a new type of Wannier functions (WFs) obtained by minimizing the conventional spread functional with a penalty term proportional to the variance of the spread distribution. This modified Wannierisation scheme is less prone to produce ineffective solutions featuring one or several poorly localized orbitals, making it well suited for complex systems or high-throughput applications. Furthermore, we propose an automatable protocol for selecting the initial guess and determine the optimal number of bands (or equivalently WFs) for the localization algorithm. The improved performance and robustness of the approach is demonstrated for a diverse set of test systems including the NV center in diamond, metal slabs with atomic adsorbates, spontaneous polarization of ferroelectrics and 30 inorganic monolayer materials comprising both metals and semiconductors. The methods are implemented in Python as part of the Atomic Simulation Environment (ASE).
△ Less
Submitted 7 November, 2021; v1 submitted 4 July, 2021;
originally announced July 2021.
-
Atomic Simulation Recipes -- a Python framework and library for automated workflows
Authors:
Morten Gjerding,
Thorbjørn Skovhus,
Asbjørn Rasmussen,
Fabian Bertoldo,
Ask Hjorth Larsen,
Jens Jørgen Mortensen,
Kristian Sommer Thygesen
Abstract:
The Atomic Simulation Recipes (ASR) is an open source Python framework for working with atomistic materials simulations in an efficient and sustainable way that is ideally suited for high-throughput projects. Central to ASR is the concept of a Recipe: a high-level Python script that performs a well defined simulation task robustly and accurately while kee** track of the data provenance. The ASR…
▽ More
The Atomic Simulation Recipes (ASR) is an open source Python framework for working with atomistic materials simulations in an efficient and sustainable way that is ideally suited for high-throughput projects. Central to ASR is the concept of a Recipe: a high-level Python script that performs a well defined simulation task robustly and accurately while kee** track of the data provenance. The ASR leverages the functionality of the Atomic Simulation Environment (ASE) to interface with external simulation codes and attain a high abstraction level. We provide a library of Recipes for common simulation tasks employing density functional theory and many-body perturbation schemes. These Recipes utilize the GPAW electronic structure code, but may be adapted to other simulation codes with an ASE interface. Being independent objects with automatic data provenance control, Recipes can be freely combined through Python scripting giving maximal freedom for users to build advanced workflows. ASR also implements a command line interface that can be used to run Recipes and inspect results. The ASR Migration module helps users maintain their data while the Database and App modules makes it possible to create local databases and present them as customized web pages.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
Experimental noise in small-angle scattering can be assessed using the Bayesian indirect Fourier transformation
Authors:
Andreas Haahr Larsen,
Martin Cramer Pedersen
Abstract:
Small-angle X-ray and neutron scattering are widely used to investigate soft matter and biophysical systems. The experimental errors are essential when assessing how well a hypothesized model fits the data. Likewise, they are important when weights are assigned to multiple data sets used to refine the same model. Therefore, it is problematic when experimental errors are over- or under-estimated. A…
▽ More
Small-angle X-ray and neutron scattering are widely used to investigate soft matter and biophysical systems. The experimental errors are essential when assessing how well a hypothesized model fits the data. Likewise, they are important when weights are assigned to multiple data sets used to refine the same model. Therefore, it is problematic when experimental errors are over- or under-estimated. A method is presented, using Bayesian indirect Fourier transformation for small-angle scattering data, to assess whether or not a given small-angle scattering data set has over- or under-estimated experimental errors. The method is effective on both simulated and experimental data, and can be used to assess and rescale the errors accordingly. Even if the estimated experimental errors are appropriate, it is ambiguous whether or not a model fits sufficiently well, as the "true" reduced $χ^2$ of the data is not necessarily unity. This is particularly relevant for approaches where overfitting is an inherent challenge, such as reweighting of a simulated molecular dynamics trajectory against small-angle scattering data or ab initio modelling. Using the outlined method, it is shown that one can determine what reduced $χ^2$ to aim for when fitting a model against small-angle scattering data. The method is easily accessible via the web interface BayesApp.
△ Less
Submitted 2 September, 2021; v1 submitted 8 December, 2020;
originally announced December 2020.
-
Real-Time Time-Dependent Density Functional Theory Implementation of Electronic Circular Dichroism Applied to Nanoscale Metal-Organic Clusters
Authors:
Esko Makkonen,
Tuomas P. Rossi,
Ask Hjorth Larsen,
Olga Lopez-Acevedo,
Patrick Rinke,
Mikael Kuisma,
Xi Chen
Abstract:
Electronic circular dichroism (ECD) is a powerful spectroscopical method for investigating chiral properties at the molecular level. ECD calculations with the commonly used linear-response time-dependent density functional theory (LR-TDDFT) framework can be prohibitively costly for large systems. To alleviate this problem, we present here an ECD implementation for the projector augmented-wave meth…
▽ More
Electronic circular dichroism (ECD) is a powerful spectroscopical method for investigating chiral properties at the molecular level. ECD calculations with the commonly used linear-response time-dependent density functional theory (LR-TDDFT) framework can be prohibitively costly for large systems. To alleviate this problem, we present here an ECD implementation for the projector augmented-wave method in the real-time-propagation TDDFT (RT-TDDFT) framework in the open-source GPAW code. Our implementation supports both local atomic basis set and real-space finite-difference representations of wave functions. We benchmark our implementation against an existing LR-TDDFT implementation in GPAW for small chiral molecules. We then demonstrate the efficiency of our local atomic basis set implementation for a large hybrid nanocluster.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
The CECAM Electronic Structure Library and the modular software development paradigm
Authors:
Micael J. T. Oliveira,
Nick Papior,
Yann Pouillon,
Volker Blum,
Emilio Artacho,
Damien Caliste,
Fabiano Corsetti,
Stefano de Gironcoli,
Alin M. Elena,
Alberto Garcia,
Victor M. Garcia-Suarez,
Luigi Genovese,
William P. Huhn,
Georg Huhs,
Sebastian Kokott,
Emine Kucukbenli,
Ask H. Larsen,
Alfio Lazzaro,
Irina V. Lebedeva,
Yingzhou Li,
David Lopez-Duran,
Pablo Lopez-Tarifa,
Martin Luders,
Miguel A. L. Marques,
Jan Minar
, et al. (12 additional authors not shown)
Abstract:
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been qu…
▽ More
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been quite successful for decades. The rapid progress in methodology, however, has resulted in an ever increasing complexity of those programs, which implies a growing amount of replication in coding and in the recurrent re-engineering needed to adapt to evolving hardware architecture. The Electronic Structure Library (\esl) was initiated by CECAM (European Centre for Atomic and Molecular Calculations) to catalyze a paradigm shift away from the monolithic model and promote modularization, with the ambition to extract common tasks from electronic structure programs and redesign them as free, open-source libraries. They include "heavy-duty" ones with a high degree of parallelisation, and potential for adaptation to novel hardware within them, thereby separating the sophisticated computer science aspects of performance optimization and re-engineering from the computational science done by scientists when implementing new ideas. It is a community effort, undertaken by developers of various successful codes, now facing the challenges arising in the new model. This modular paradigm will improve overall coding efficiency and enable specialists (computer scientists or computational scientists) to use their skills more effectively. It will lead to a more sustainable and dynamic evolution of software as well as lower barriers to entry for new developers.
△ Less
Submitted 24 June, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
-
Octopus, a computational framework for exploring light-driven phenomena and quantum dynamics in extended and finite systems
Authors:
Nicolas Tancogne-Dejean,
Micael J. T. Oliveira,
Xavier Andrade,
Heiko Appel,
Carlos H. Borca,
Guillaume Le Breton,
Florian Buchholz,
Alberto Castro,
Stefano Corni,
Alfredo A. Correa,
Umberto De Giovannini,
Alain Delgado,
Florian G. Eich,
Johannes Flick,
Gabriel Gil,
Adrián Gomez,
Nicole Helbig,
Hannes Hübener,
René Jestädt,
Joaquim Jornet-Somoza,
Ask H. Larsen,
Irina V. Lebedeva,
Martin Lüders,
Miguel A. L. Marques,
Sebastian T. Ohlmann
, et al. (9 additional authors not shown)
Abstract:
Over the last years extraordinary advances in experimental and theoretical tools have allowed us to monitor and control matter at short time and atomic scales with a high-degree of precision. An appealing and challenging route towards engineering materials with tailored properties is to find ways to design or selectively manipulate materials, especially at the quantum level. To this end, having a…
▽ More
Over the last years extraordinary advances in experimental and theoretical tools have allowed us to monitor and control matter at short time and atomic scales with a high-degree of precision. An appealing and challenging route towards engineering materials with tailored properties is to find ways to design or selectively manipulate materials, especially at the quantum level. To this end, having a state-of-the-art ab initio computer simulation tool that enables a reliable and accurate simulation of light-induced changes in the physical and chemical properties of complex systems is of utmost importance. The first principles real-space-based Octopus project was born with that idea in mind, providing an unique framework allowing to describe non-equilibrium phenomena in molecular complexes, low dimensional materials, and extended systems by accounting for electronic, ionic, and photon quantum mechanical effects within a generalized time-dependent density functional theory framework. The present article aims to present the new features that have been implemented over the last few years, including technical developments related to performance and massive parallelism. We also describe the major theoretical developments to address ultrafast light-driven processes, like the new theoretical framework of quantum electrodynamics density-functional formalism (QEDFT) for the description of novel light-matter hybrid states. Those advances, and other being released soon as part of the Octopus package, will enable the scientific community to simulate and characterize spatial and time-resolved spectroscopies, ultrafast phenomena in molecules and materials, and new emergent states of matter (QED-materials).
△ Less
Submitted 17 December, 2019;
originally announced December 2019.
-
How to learn from inconsistencies: Integrating molecular simulations with experimental data
Authors:
Simone Orioli,
Andreas Haahr Larsen,
Sandro Bottaro,
Kresten Lindorff-Larsen
Abstract:
Molecular simulations and biophysical experiments can be used to provide independent and complementary insights into the molecular origin of biological processes. A particularly useful strategy is to use molecular simulations as a modelling tool to interpret experimental measurements, and to use experimental data to refine our biophysical models. Thus, explicit integration and synergy between mole…
▽ More
Molecular simulations and biophysical experiments can be used to provide independent and complementary insights into the molecular origin of biological processes. A particularly useful strategy is to use molecular simulations as a modelling tool to interpret experimental measurements, and to use experimental data to refine our biophysical models. Thus, explicit integration and synergy between molecular simulations and experiments is fundamental for furthering our understanding of biological processes. This is especially true in the case where discrepancies between measured and simulated observables emerge. In this chapter, we provide an overview of some of the core ideas behind methods that were developed to improve the consistency between experimental information and numerical predictions. We distinguish between situations where experiments are used to refine our understanding and models of specific systems, and situations where experiments are used more generally to refine transferable models. We discuss different philosophies and attempt to unify them in a single framework. Until now, such integration between experiments and simulations have mostly been applied to equilibrium data, and we discuss more recent developments aimed to analyse time-dependent or time-resolved data.
△ Less
Submitted 8 December, 2019; v1 submitted 15 September, 2019;
originally announced September 2019.
-
Optical Excitations of Chlorophyll $a$ and $b$ Monomers and Dimers
Authors:
María Rosa Preciado-Rivas,
Duncan John Mowbray,
Keenan Lyon,
Ask Hjorth Larsen,
Bruce Forbes Milne
Abstract:
A necessary first step in the development of technologies such as artificial photosynthesis is understanding the photoexcitation process within the basic building blocks of naturally-occurring light harvesting complexes (LHCs). The most important of these building blocks in biological LHCs such as LHC II from green plants are the chlorophyll $a$ (Chl $a$) and chlorophyll $b$ (Chl $b$) chromophores…
▽ More
A necessary first step in the development of technologies such as artificial photosynthesis is understanding the photoexcitation process within the basic building blocks of naturally-occurring light harvesting complexes (LHCs). The most important of these building blocks in biological LHCs such as LHC II from green plants are the chlorophyll $a$ (Chl $a$) and chlorophyll $b$ (Chl $b$) chromophores dispersed throughout the protein matrix. However, efforts to describe such systems are still hampered by the lack of computationally efficient and accurate methods that are able to describe optical absorption in large biomolecules. In this work we employ a highly efficient linear combination of atomic orbitals (LCAOs) to represent the Kohn--Sham (KS) wave functions at the density functional theory (DFT) level and perform time dependent density functional theory (TDDFT) in either the reciprocal space and frequency domain (LCAO-TDDFT-$k$-$ω$) or real space and time (LCAO-TDDFT-$r$-$t$) calculations of the optical absorption spectra of Chl $a$ and $b$ monomers and dimers. We find our LCAO-TDDFT-$k$-$ω$ and LCAO-TDDFT-$r$-$t$ calculations reproduce results obtained with a plane wave (PW) representation of the KS wave functions (PW-TDDFT-$k$-$ω$), but with a significant reduction in computational effort. Moreover, by applying the GLLB-SC derivative discontinuity correction $Δ_x$ to the KS eigenenergies, with both LCAO-TDDFT-$k$-$ω$ and LCAO-TDDFT-$r$-$t$ methods we are able to semi-quantitatively reproduce the experimentally measured photoinduced dissociation (PID) results. This work opens the path to first principles calculations of optical excitations in macromolecular systems.
△ Less
Submitted 29 July, 2019; v1 submitted 22 July, 2019;
originally announced July 2019.
-
Intrinsic core level photoemission of suspended graphene
Authors:
Toma Susi,
Mattia Scardamaglia,
Kimmo Mustonen,
Andreas Mittelberger,
Mohamed Al-Hada,
Matteo Amati,
Hikmet Sezen,
Patrick Zeller,
Ask H. Larsen,
Clemens Mangler,
Jannik C. Meyer,
Luca Gregoratti,
Carla Bittencourt,
Jani Kotakoski
Abstract:
X-ray photoelectron spectroscopy of graphene is important both for its characterization and as a model for other carbon materials. Despite great recent interest, the intrinsic photoemission of its single layer has not been unambiguously measured, nor is the layer-dependence in free-standing multilayers accurately determined. We combine scanning transmission electron microscopy and Raman spectrosco…
▽ More
X-ray photoelectron spectroscopy of graphene is important both for its characterization and as a model for other carbon materials. Despite great recent interest, the intrinsic photoemission of its single layer has not been unambiguously measured, nor is the layer-dependence in free-standing multilayers accurately determined. We combine scanning transmission electron microscopy and Raman spectroscopy with synchrotron-based scanning photoelectron microscopy to characterize the same areas of suspended graphene samples down to the atomic level. This allows us to assign spectral signals to regions of precisely known layer number and purity. The core level binding energy of the monolayer is measured at 284.70 eV, thus 0.28 eV higher than that of graphite, with intermediate values found for few layers. This trend is reproduced by density functional theory with or without explicit van der Waals interactions, indicating that intralayer charge rearrangement dominates, but in our model of static screening the magnitudes of the shifts are underestimated by half.
△ Less
Submitted 31 July, 2018;
originally announced July 2018.
-
libvdwxc: A library for exchange-correlation functionals in the vdW-DF family
Authors:
Ask Hjorth Larsen,
Mikael Kuisma,
Joakim Löfgren,
Yann Pouillon,
Paul Erhart,
Per Hyldgaard
Abstract:
We present libvdwxc, a general library for evaluating the energy and potential for the family of vdW-DF exchange--correlation functionals. libvdwxc provides an efficient implementation of the vdW-DF method and can be interfaced with various general-purpose DFT codes. Currently, the GPAW and Octopus codes implement interfaces to libvdwxc. The present implementation emphasizes scalability and parall…
▽ More
We present libvdwxc, a general library for evaluating the energy and potential for the family of vdW-DF exchange--correlation functionals. libvdwxc provides an efficient implementation of the vdW-DF method and can be interfaced with various general-purpose DFT codes. Currently, the GPAW and Octopus codes implement interfaces to libvdwxc. The present implementation emphasizes scalability and parallel performance, and thereby enables \textit{ab initio} calculations of nanometer-scale complexes. The numerical accuracy is benchmarked on the S22 test set whereas parallel performance is benchmarked on ligand-protected gold nanoparticles ($\text{Au}_{144}(\text{SC}_{11}\text{NH}_{25})_{60}$) up to 9696 atoms.
△ Less
Submitted 7 June, 2017; v1 submitted 20 March, 2017;
originally announced March 2017.
-
Localized surface plasmon resonance in silver nanoparticles: Atomistic first-principles time-dependent density-functional theory calculations
Authors:
Mikael Kuisma,
Arto Sakko,
Tuomas P. Rossi,
Ask H. Larsen,
Jussi Enkovaara,
Lauri Lehtovaara,
Tapio T. Rantala
Abstract:
We observe using ab initio methods that localized surface plasmon resonances in icosahedral silver nanoparticles enter the asymptotic region already between diameters of 1 and 2 nm, converging close to the classical quasistatic limit around 3.4 eV. We base the observation on time-dependent density-functional theory simulations of the icosahedral silver clusters Ag$_{55}$ (1.06 nm), Ag$_{147}$ (1.6…
▽ More
We observe using ab initio methods that localized surface plasmon resonances in icosahedral silver nanoparticles enter the asymptotic region already between diameters of 1 and 2 nm, converging close to the classical quasistatic limit around 3.4 eV. We base the observation on time-dependent density-functional theory simulations of the icosahedral silver clusters Ag$_{55}$ (1.06 nm), Ag$_{147}$ (1.60 nm), Ag$_{309}$ (2.14 nm), and Ag$_{561}$ (2.68 nm). The simulation method combines the adiabatic GLLB-SC exchange-correlation functional with real time propagation in an atomic orbital basis set using the projector-augmented wave method. The method has been implemented for the electron structure code GPAW within the scope of this work. We obtain good agreement with experimental data and modeled results, including photoemission and plasmon resonance. Moreover, we can extrapolate the ab initio results to the classical quasistatically modeled icosahedral clusters.
△ Less
Submitted 8 April, 2015; v1 submitted 24 March, 2015;
originally announced March 2015.
-
Real-space grids and the Octopus code as tools for the development of new simulation approaches for electronic systems
Authors:
Xavier Andrade,
David A. Strubbe,
Umberto De Giovannini,
Ask Hjorth Larsen,
Micael J. T. Oliveira,
Joseba Alberdi-Rodriguez,
Alejandro Varas,
Iris Theophilou,
Nicole Helbig,
Matthieu Verstraete,
Lorenzo Stella,
Fernando Nogueira,
Alán Aspuru-Guzik,
Alberto Castro,
Miguel A. L. Marques,
Ángel Rubio
Abstract:
Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of…
▽ More
Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of implementing and testing new physical models. Based on our experience with the Octopus code, in this article we discuss how the real-space approach has allowed for the recent development of new ideas for the simulation of electronic systems. Among these applications are approaches to calculate response properties, modeling of photoemission, optimal control of quantum systems, simulation of plasmonic systems, and the exact solution of the Schrödinger equation for low-dimensionality systems.
△ Less
Submitted 22 January, 2015;
originally announced January 2015.
-
Modeling electron dynamics coupled to continuum states in finite volumes
Authors:
Umberto De Giovannini,
Ask Hjorth Larsen,
Angel Rubio
Abstract:
Absorbing boundaries are frequently employed in real-time propagation of the Schrödinger equation to remove spurious reflections and efficiently emulate outgoing boundary conditions. These conditions are a fundamental ingredient for an implicit description of observables involving infinitely extended continuum states. In the literature, several boundary absorbers have been proposed. They mostly fa…
▽ More
Absorbing boundaries are frequently employed in real-time propagation of the Schrödinger equation to remove spurious reflections and efficiently emulate outgoing boundary conditions. These conditions are a fundamental ingredient for an implicit description of observables involving infinitely extended continuum states. In the literature, several boundary absorbers have been proposed. They mostly fall into three main families: mask function absorbers, complex absorbing potentials, and exterior complex-scaled potentials. To date none of the proposed absorbers is perfect, and all present a certain degree of reflections. Characterization of such reflections is thus a critical task with strong implications for time-dependent simulations of atoms and molecules. We introduce a method to evaluate the reflection properties of a given absorber and present a comparison of selected samples for each family of absorbers. Further, we discuss the connections between members of each family and show how the same reflection curves can be obtained with very different absorption schemes.
△ Less
Submitted 5 September, 2014;
originally announced September 2014.
-
Stark Ionization of Atoms and Molecules within Density Functional Resonance Theory
Authors:
Ask Hjorth Larsen,
Umberto De Giovannini,
Daniel Lee Whitenack,
Adam Wasserman,
Angel Rubio
Abstract:
We show that the energetics and lifetimes of resonances of finite systems under an external electric field can be captured by Kohn--Sham density functional theory (DFT) within the formalism of uniform complex scaling. Properties of resonances are calculated self-consistently in terms of complex densities, potentials and wavefunctions using adapted versions of the known algorithms from DFT. We illu…
▽ More
We show that the energetics and lifetimes of resonances of finite systems under an external electric field can be captured by Kohn--Sham density functional theory (DFT) within the formalism of uniform complex scaling. Properties of resonances are calculated self-consistently in terms of complex densities, potentials and wavefunctions using adapted versions of the known algorithms from DFT. We illustrate this new formalism by calculating ionization rates using the complex-scaled local density approximation and exact exchange. We consider a variety of atoms (H, He, Li and Be) as well as the hydrogen molecule. Extensions are briefly discussed.
△ Less
Submitted 11 September, 2013;
originally announced September 2013.
-
Electronic shell structure and chemisorption on gold nanoparticles
Authors:
Ask Hjorth Larsen,
Jesper Kleis,
Kristian Sommer Thygesen,
Jens Nørskov,
Karsten Wedel Jacobsen
Abstract:
We use density functional theory (DFT) to investigate the electronic structure and chemical properties of gold nanoparticles. Different structural families of clusters are compared. For up to 60 atoms we optimize structures using DFT-based simulated annealing. Cluster geometries are found to distort considerably, creating large band gaps at the Fermi level. For up to 200 atoms we consider structur…
▽ More
We use density functional theory (DFT) to investigate the electronic structure and chemical properties of gold nanoparticles. Different structural families of clusters are compared. For up to 60 atoms we optimize structures using DFT-based simulated annealing. Cluster geometries are found to distort considerably, creating large band gaps at the Fermi level. For up to 200 atoms we consider structures generated with a simple EMT potential and clusters based on cuboctahedra and icosahedra. All types of cluster geometry exhibit jellium-like electronic shell structure. We calculate adsorption energies of several atoms on the cuboctahedral clusters. Adsorption energies are found to vary abruptly at magic numbers. Using a Newns-Anderson model we find that the effect of magic numbers on adsorption energy can be understood from the location of adsorbate-induced states with respect to the cluster Fermi level.
△ Less
Submitted 4 March, 2013;
originally announced March 2013.
-
Localized atomic basis set in the projector augmented wave method
Authors:
Ask Hjorth Larsen,
Marco Vanin,
Jens Jørgen Mortensen,
Kristian Sommer Thygesen,
Karsten Wedel Jacobsen
Abstract:
We present an implementation of localized atomic orbital basis sets in the projector augmented wave (PAW) formalism within the density functional theory (DFT). The implementation in the real-space GPAW code provides a complementary basis set to the accurate but computationally more demanding grid representation. The possibility to switch seamlessly between the two representations implies that simu…
▽ More
We present an implementation of localized atomic orbital basis sets in the projector augmented wave (PAW) formalism within the density functional theory (DFT). The implementation in the real-space GPAW code provides a complementary basis set to the accurate but computationally more demanding grid representation. The possibility to switch seamlessly between the two representations implies that simulations employing the local basis can be fine tuned at the end of the calculation by switching to the grid, thereby combining the strength of the two representations for optimal performance. The implementation is tested by calculating atomization energies and equilibrium bulk properties of a variety of molecules and solids, comparing to the grid results. Finally, it is demonstrated how a grid-quality structure optimization can be performed with significantly reduced computational effort by switching between the grid and basis representations.
△ Less
Submitted 1 March, 2013;
originally announced March 2013.
