Showing 1–34 of 34 results for author: Lanzillotti-Kimura, N D

Interference of ultrahigh frequency acoustic phonons from distant quasi-continuous sources

Authors: C. Xiang, E. R. Cardozo de Oliveira, S. Sandeep, K. Papatryfonos, M. Morassi, L. Le Gratiet, A. Harouri, I. Sagnes, A. Lemaitre, O. Ortiz, M. Esmann, N. D. Lanzillotti-Kimura

Abstract: The generation of propagating acoustic waves is essential for telecommunication applications, quantum technologies, and sensing. Up to now, the electrical generation has been at the core of most implementations, but is technologically limited to a few gigahertz. Overcoming this frequency limit holds the prospect of faster modulators, quantum acoustics at higher working temperatures, nanoacoustic s… ▽ More The generation of propagating acoustic waves is essential for telecommunication applications, quantum technologies, and sensing. Up to now, the electrical generation has been at the core of most implementations, but is technologically limited to a few gigahertz. Overcoming this frequency limit holds the prospect of faster modulators, quantum acoustics at higher working temperatures, nanoacoustic sensing from smaller volumes. Alternatively, the optical excitation of acoustic resonators has unlocked frequencies up to 1 THz, but in most cases, the acoustic energy cannot be efficiently extracted from the resonator into a propagating wave. Here, we demonstrate a quasi-continuous and coherent source of 20 GHz acoustic phonons, based on a ridge waveguide, structured in the vertical direction as a high-Q acousto-optic resonator. The high frequency phonons propagate up to 20 $μ$m away from the source, with a decay rate of $\sim$1.14 dB/$μ$m. We demonstrate the coherence between acoustic phonons generated from two distant sources through spatio-temporal interference. This concept could be scaled up to a larger number of sources, which enable a new generation of optically programmed, reconfigurable nanoacoustic devices and applications. △ Less

Submitted 9 July, 2024; originally announced July 2024.

Polarization-controlled Brillouin scattering in elliptical optophononic resonators

Authors: Anne Rodriguez, Elham Mehdi, Priya, Edson R. Cardozo de Oliveira, Martin Esmann, Norberto Daniel Lanzillotti-Kimura

Abstract: The fast-growing development of optomechanical applications has motivated advancements in Brillouin scattering research. In particular, the study of high frequency acoustic phonons at the nanoscale is interesting due to large range of interactions with other excitations in matter. However, standard Brillouin spectroscopy schemes rely on fixed wavelength filtering, which limits the usefulness for t… ▽ More The fast-growing development of optomechanical applications has motivated advancements in Brillouin scattering research. In particular, the study of high frequency acoustic phonons at the nanoscale is interesting due to large range of interactions with other excitations in matter. However, standard Brillouin spectroscopy schemes rely on fixed wavelength filtering, which limits the usefulness for the study of tunable optophononic resonators. It has been recently demonstrated that elliptical optophononic micropillar resonators induce different energy-dependent polarization states for the Brillouin and the elastic Rayleigh scattering, and that a polarization filtering setup could be implemented to increase the contrast between the inelastic and elastic scattering of the light. An optimal filtering configuration can be reached when the polarization states of the laser and the Brillouin signal are orthogonal from each other. In this work, we theoretically investigate the parameters of such polarization-based filtering technique to enhance the efficiency of Brillouin scattering detection. For the filtering optimization, we explore the initial wavelength and polarization state of the incident laser, as well as in the ellipticity of the micropillars, and reach an almost optimal configuration for nearly background-free Brillouin detection. Our findings are one step forward on the efficient detection of Brillouin scattering in nanostructures for potential applications in fields such as optomechanics and quantum communication. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Photonic and phononic modes in acoustoplasmonic toroidal nanopropellers

Authors: Beatriz Castillo López de Larrinzar, Jorge M. García, Norberto Daniel Lanzillotti-Kimura, Antonio García-Martín

Abstract: Non-conventional resonances, both acoustic and photonic, are found in metallic particles with a toroidal nanopropeller geometry that is generated by swee** a three-lobed 2D-shape along a spiral with twisting angle, $α$. For both optical and acoustic cases, spectral location of resonances experiences a red-shift as a function of $α$. We demonstrate that the optical case can be understood as a nat… ▽ More Non-conventional resonances, both acoustic and photonic, are found in metallic particles with a toroidal nanopropeller geometry that is generated by swee** a three-lobed 2D-shape along a spiral with twisting angle, $α$. For both optical and acoustic cases, spectral location of resonances experiences a red-shift as a function of $α$. We demonstrate that the optical case can be understood as a natural evolution of resonances as the spiral length of the toroidal nanopropeller increases with $α$, implying a huge helicity dependent absorption cross section. In the case of acoustic response, two red-shifting breathing modes are identified. Additionally, even small $α$ allows the appearance of new low-frequency resonances, whose spectral dispersion depends on a competition between length of the generative spiral and the pitch of the toroidal nanopropeller. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 9 pages 7 figures

Stimulated Forward Brillouin Scattering in Subwavelength Silicon Membranes

Authors: Paula Nuño Ruano, Jianhao Zhang, David González-Andrade, Daniele Melati, Eric Cassan, Pavel Cheben, Laurent Vivien, Norberto Daniel Lanzillotti-Kimura, Carlos Alonso-Ramos

Abstract: On-chip Brillouin scattering plays a key role in numerous applications in the domain of signal processing and microwave photonics due to the coherent bidirectional coupling between near-infrared optical signals and GHz mechanical modes, which enables selective amplification and attenuation with remarkably narrow linewidths, in the kHz to MHz range. Subwavelength periodic nanostructures provide pre… ▽ More On-chip Brillouin scattering plays a key role in numerous applications in the domain of signal processing and microwave photonics due to the coherent bidirectional coupling between near-infrared optical signals and GHz mechanical modes, which enables selective amplification and attenuation with remarkably narrow linewidths, in the kHz to MHz range. Subwavelength periodic nanostructures provide precise control of the propagation of light and sound in silicon photonic circuits, key to maximize the efficiency of Brillouin interactions. Here, we propose and demonstrate a new subwavelength waveguide geometry allowing independent control of optical and mechanical modes. Two silicon lattices are combined, one with a subwavelength period for the light and one with a total bandgap for the sound, to confine optical and mechanical modes, respectively. Based on this approach, we experimentally demonstrate optomechanical coupling between near-infrared optical modes and GHz mechanical modes with with 5-8 MHz linewidth and a coupling strength of GB = 1360 1/(W m). A Stokes gain of 1.5 dB, and anti-Stoke loss of -2 dB are observed for a 6 mm-long waveguide with 35.5 mW of input power. We show tuning of the mechanical frequency between 5 and 8 GHz by geometrical optimization, without loss of the optomechanical coupling strength. △ Less

Submitted 23 February, 2024; originally announced February 2024.

Elliptical micropillars for efficient generation and detection of coherent acoustic phonons

Authors: Chushuang Xiang, Anne Rodriguez, Edson Rafael Cardozo de Oliveira, Luc Le Gratiet, Isabelle Sagnes, Martina Morassi, Aristide Lemaitre, Norberto Daniel Lanzillotti-Kimura

Abstract: Coherent acoustic phonon generation and detection assisted by optical resonances are at the core of efficient optophononic transduction processes. However, when dealing with a single optical resonance, the optimum generation and detection conditions take place at different laser wavelengths, i.e. different detunings from the cavity mode. In this work, we theoretically propose and experimentally de… ▽ More Coherent acoustic phonon generation and detection assisted by optical resonances are at the core of efficient optophononic transduction processes. However, when dealing with a single optical resonance, the optimum generation and detection conditions take place at different laser wavelengths, i.e. different detunings from the cavity mode. In this work, we theoretically propose and experimentally demonstrate the use of elliptical micropillars to reach these conditions simultaneously at a single wavelength. Elliptical micropillar optophononic resonators present two optical modes with orthogonal polarizations at different wavelengths. By employing a cross-polarized scheme pump-probe experiment, we exploit the mode splitting and couple the pump beam to one mode while the probe is detuned from the other one. In this way, at a particular micropillar ellipticity, both phonon generation and detection processes are enhanced. We report an enhancement of a factor of ~3.1 when comparing the signals from elliptical and circular micropillars. Our findings constitute a step forward in tailoring the light-matter interaction for more efficient ultrahigh-frequency optophononic devices. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: 10 pages, 5 figures

Effects of surface roughness and top layer thickness on the performance of Fabry-Perot cavities and responsive open resonators based on distributed Bragg reflectors

Authors: Konstantinos Papatryfonos, Edson Rafael Cardozo de Oliveira, Norberto Daniel Lanzillotti-Kimura

Abstract: Optical and acoustic resonators based on distributed Bragg reflectors (DBRs) hold significant potential across various domains, from lasers to quantum technologies. In ideal conditions with perfectly smooth interfaces and surfaces, the DBR resonator quality factor primarily depends on the number of DBR pairs and can be arbitrarily increased by adding more pairs. Here, we present a comprehensive an… ▽ More Optical and acoustic resonators based on distributed Bragg reflectors (DBRs) hold significant potential across various domains, from lasers to quantum technologies. In ideal conditions with perfectly smooth interfaces and surfaces, the DBR resonator quality factor primarily depends on the number of DBR pairs and can be arbitrarily increased by adding more pairs. Here, we present a comprehensive analysis of the impact of top layer thickness variation and surface roughness on the performance of both Fabry-Perot and open-cavity resonators based on DBRs. Our findings illustrate that even a small, nanometer-scale surface roughness can appreciably reduce the quality factor of a given cavity. Moreover, it imposes a limitation on the maximum achievable quality factor, regardless of the number of DBR pairs. These effects hold direct relevance for practical applications, which we explore further through two case studies. In these instances, open nanoacoustic resonators serve as sensors for changes occurring in dielectric materials positioned on top of them. Our investigation underscores the importance of accounting for surface roughness in the design of both acoustic and optical DBR-based cavities, while also quantifying the critical significance of minimizing roughness during material growth and device fabrication processes. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Design of Cost-Effective Nanoacoustic Devices based on Mesoporous Thin Films

Authors: Edson R. Cardozo de Oliveira, Priscila Vensaus, Galo J. A. A. Soler-Illia, Norberto Daniel Lanzillotti-Kimura

Abstract: Gigahertz acoustic resonators have the potential to advance data processing and quantum communication. However, they are expensive and lack responsiveness to external stimuli, limiting their use in sensing applications. In contrast, low-cost nanoscale mesoporous materials, known for their high surface-to-volume ratio, have shown promise in various applications. We recently demonstrated that mesopo… ▽ More Gigahertz acoustic resonators have the potential to advance data processing and quantum communication. However, they are expensive and lack responsiveness to external stimuli, limiting their use in sensing applications. In contrast, low-cost nanoscale mesoporous materials, known for their high surface-to-volume ratio, have shown promise in various applications. We recently demonstrated that mesoporous silicon dioxide (SiO2) and titanium dioxide (TiO2) thin layers can support coherent acoustic modes in the 5 to 100 GHz range. In this study, we propose a new method for designing tunable acoustic resonators using mesoporous thin films on acoustic distributed Bragg reflectors. By infiltrating the pores with different chemicals, the material's properties could be altered and achieve tunability in the acoustic resonances. We present four device designs and use simulations to predict resonators with Q-factors up to 1000. We also observe that the resonant frequency and intensity show a linear response to relative humidity, with a tunability of up to 60 %. Our platform offers a unique opportunity to design cost-effective nanoacoustic sensing and reconfigurable optoacoustic nanodevices. △ Less

Submitted 28 July, 2023; originally announced July 2023.

Comments: 9 pages, 5 figures

Topological Nanophononic Interface States Using High-Order Bandgaps in the One-Dimensional Su-Schrieffer-Heeger Model

Authors: Anne Rodriguez, Konstantinos Papatryfonos, Edson Rafael Cardozo de Oliveira, Norberto Daniel Lanzillotti-Kimura

Abstract: Topological interface states in periodic lattices have emerged as valuable assets in the fields of electronics, photonics, and phononics, owing to their inherent robustness against disorder. Unlike electronics and photonics, the linear dispersion relation of hypersound offers an ideal framework for investigating higher-order bandgaps. In this work, we propose a design strategy for the generation a… ▽ More Topological interface states in periodic lattices have emerged as valuable assets in the fields of electronics, photonics, and phononics, owing to their inherent robustness against disorder. Unlike electronics and photonics, the linear dispersion relation of hypersound offers an ideal framework for investigating higher-order bandgaps. In this work, we propose a design strategy for the generation and manipulation of topological nanophononic interface states within high-order bandgaps of GaAs/AlAs multilayered structures. These states arise from the band inversion of two concatenated superlattices that exhibit inverted spatial mode symmetries around the bandgap. By adjusting the thickness ratio of the unit cells in these superlattices, we are able to engineer interface states in different bandgaps, enabling the development of versatile topological devices spanning a wide frequency range. Moreover, we demonstrate that such interface states can also be generated in hybrid structures that combine two superlattices with bandgaps of different orders centered around the same frequency. These structures open up new avenues for exploring topological confinement in high-order bandgaps, providing a unique platform for unveiling and better understanding complex topological systems. △ Less

Submitted 30 May, 2023; originally announced May 2023.

Comments: 13 pages, 5 figures; supplementary information: 1 page, 1 figure

Perspectives on high-frequency nanomechanics, nanoacoustics, and nanophononics

Authors: Priya, Edson R. Cardozo de Oliveira, Norberto D. Lanzillotti-Kimura

Abstract: Nanomechanics, nanoacoustics, and nanophononics refer to the engineering of acoustic phonons and elastic waves at the nanoscale and their interactions with other excitations such as magnons, electrons, and photons. This engineering enables the manipulation and control of solid-state properties that depend on the relative positions of atoms in a lattice. The access to advanced nanofabrication and n… ▽ More Nanomechanics, nanoacoustics, and nanophononics refer to the engineering of acoustic phonons and elastic waves at the nanoscale and their interactions with other excitations such as magnons, electrons, and photons. This engineering enables the manipulation and control of solid-state properties that depend on the relative positions of atoms in a lattice. The access to advanced nanofabrication and novel characterization techniques enabled a fast development of the fields over the last decade. The applications of nanophononics include thermal management, ultrafast data processing, simulation, sensing, and the development of quantum technologies. In this review, we cover some of the milestones and breakthroughs, and identify promising pathways of these emerging fields. △ Less

Submitted 18 January, 2023; originally announced January 2023.

Comments: 19 pages, 3 figures

Genetic optimization of Brillouin scattering gain in subwavelength-structured silicon membrane waveguides

Authors: Paula Nuño Ruano, Jianhao Zhang, Xavier Le Roux, David González-Andrade, Eric Cassan, Delphine Marris-Morini, Laurent Vivien, Norberto Daniel Lanzillotti-Kimura, Carlos Alonso-Ramos

Abstract: On-chip Brillouin optomechanics has great potential for applications in communications, sensing, and quantum technologies. Tight confinement of near-infrared photons and gigahertz phonons in integrated waveguides remains a key challenge to achieving strong on-chip Brillouin gain. Here, we propose a new strategy to harness Brillouin gain in silicon waveguides, based on the combination of genetic al… ▽ More On-chip Brillouin optomechanics has great potential for applications in communications, sensing, and quantum technologies. Tight confinement of near-infrared photons and gigahertz phonons in integrated waveguides remains a key challenge to achieving strong on-chip Brillouin gain. Here, we propose a new strategy to harness Brillouin gain in silicon waveguides, based on the combination of genetic algorithm optimization and periodic subwavelength structuration to engineer photonic and phononic modes simultaneously. The proposed geometry is composed of a waveguide core and a lattice of anchoring arms with a subwavelength period requiring a single etch step. The waveguide geometry is optimized to maximize the Brillouin gain using a multi-physics genetic algorithm. Our simulation results predict a remarkable Brillouin gain exceeding 3300 1/(W m), for a mechanical frequency near 15 GHz. △ Less

Submitted 10 January, 2023; originally announced January 2023.

Probing Gigahertz Coherent Acoustic Phonons in TiO$_{2}$ Mesoporous Thin Films

Authors: E. R. Cardozo de Oliveira, C. Xiang, M. Esmann, N. Lopez Abdala, M. C. Fuertes, A. Bruchhausen, H. Pastoriza, B. Perrin, G. J. A. A. Soler-Illia, N. D. Lanzillotti-Kimura

Abstract: Ultrahigh-frequency acoustic-phonon resonators usually require atomically flat interfaces to avoid phonon scattering and dephasing, leading to expensive fabrication processes, such as molecular beam epitaxy. In contrast, mesoporous thin films are based on inexpensive wet chemical fabrication techniques. Here, we report mesoporous titanium dioxide-based acoustic resonators with resonances up to 90… ▽ More Ultrahigh-frequency acoustic-phonon resonators usually require atomically flat interfaces to avoid phonon scattering and dephasing, leading to expensive fabrication processes, such as molecular beam epitaxy. In contrast, mesoporous thin films are based on inexpensive wet chemical fabrication techniques. Here, we report mesoporous titanium dioxide-based acoustic resonators with resonances up to 90 GHz, and quality factors from 3 to 7. Numerical simulations show a good agreement with the picosecond ultrasonics experiments. We also numerically study the effect of changes in the speed of sound on the performance of the resonator. This change could be induced by liquid infiltration into the mesopores. Our findings constitute the first step towards the engineering of building blocks based on mesoporous thin films for reconfigurable optoacoustic sensors. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: 13 pages, 4 figures

Towards chiral acoustoplasmonics

Authors: B. Castillo López de Larrinzar, C. Xiang, E. Cardozo de Oliveira, N. D. Lanzillotti-Kimura, A. García-Martín

Abstract: The possibility of creating and manipulating nanostructured materials encouraged the exploration of new strategies to control electromagnetic properties. Among the most intriguing nanostructures are those that respond differently to helical polarization, i.e., exhibit chirality. Here, we present a simple structure based on crossed elongated bars where light-handedness defines the dominating cross-… ▽ More The possibility of creating and manipulating nanostructured materials encouraged the exploration of new strategies to control electromagnetic properties. Among the most intriguing nanostructures are those that respond differently to helical polarization, i.e., exhibit chirality. Here, we present a simple structure based on crossed elongated bars where light-handedness defines the dominating cross-section absorption or scattering, with a 200% difference from its counterpart (scattering or absorption). The proposed chiral system opens the way to enhanced coherent phonon excitation and detection. We theoretically propose a simple coherent phonon generation (time-resolved Brillouin scattering) experiment using circularly polarized light. In the reported structures, the generation of acoustic phonons is optimized by maximizing the absorption, while the detection is enhanced at the same wavelength -- and different helicity -- by engineering the scattering properties. The presented results constitute one of the first steps towards harvesting chirality effects in the design and optimization of efficient and versatile acoustoplasmonic transducers. △ Less

Submitted 18 April, 2023; v1 submitted 10 December, 2022; originally announced December 2022.

Comments: 9 pages, 6 figures + 2 pages for Supplementary Info. with two figures

Brillouin Scattering Selection Rules in Polarization-Sensitive Photonic Resonators

Authors: Anne Rodriguez, Priya Priya, Edson Cardozo de Oliveira, Luc Le Gratiet, Isabelle Sagnes, Martina Morassi, Aristide Lemaître, Florian Pastier, Loïc Lanco, Martin Esmann, Norberto Daniel Lanzillotti-Kimura

Abstract: The selection rules governing spontaneous Brillouin scattering in crystalline solids are usually taken as intrinsic material properties, locking the relative polarization of excitation and signal in bulk. In this work, we independently manipulate these polarization states by means of optical resonances in elliptical micropillars and demonstrate a polarization-based filtering scheme for Brillouin s… ▽ More The selection rules governing spontaneous Brillouin scattering in crystalline solids are usually taken as intrinsic material properties, locking the relative polarization of excitation and signal in bulk. In this work, we independently manipulate these polarization states by means of optical resonances in elliptical micropillars and demonstrate a polarization-based filtering scheme for Brillouin spectroscopy in the 20-100 GHz range, important for telecom applications. This strong modification of selection rules using elliptical micropillars can be extended to any optical system with localized, polarization-sensitive modes, such as plasmonic resonators, photonic crystals, birefringent micro-, and nanostructures. Our polarization control protocol will thus find applications in the engineering of light-matter interactions in optomechanical, optoelectronic and quantum optics devices. △ Less

Submitted 26 September, 2022; originally announced September 2022.

Comments: 13 pages, 4 figures

Surface acoustic wave lasing in a silicon optomechanical cavity

Authors: J. Zhang, P. Nuño-Ruano, X. Le Roux, M. Montesinos-Ballester, D. Marris-Morini, E. Cassan, L. Vivien, N. D. Lanzillotti-Kimura, C. Alonso-Ramos

Abstract: Integrated optomechanical cavities stand as a promising means to interface mechanical motion and guided optical modes. State-of-the-art demonstrations rely on optical and mechanical modes tightly confined of in micron-scale areas to achieve strong optomechanical coupling. However, the need for tight optomechanical confinement and the general use of suspended devices hinders interaction with extern… ▽ More Integrated optomechanical cavities stand as a promising means to interface mechanical motion and guided optical modes. State-of-the-art demonstrations rely on optical and mechanical modes tightly confined of in micron-scale areas to achieve strong optomechanical coupling. However, the need for tight optomechanical confinement and the general use of suspended devices hinders interaction with external devices, limiting the potential for the implementation of complex circuits. Here, we propose and demonstrate a new approach for optomechanical cavities coupling free-propagating surface acoustic waves (SAWs) and guided optical modes. The cavity is formed by a periodic array of silicon nanopillars with subwavelength separation, implemented in silicon-on-insulator substrate. Optical pum** yields a strong radiation pressure that drives the harmonic vibration of the pillars, periodically deforming the silica under-cladding and exciting the SAW. The propagation of the SAW deforms the cavity period, modulating the resonance wavelength to close the optomechanical coupling loop. Based on this concept, we experimentally demonstrate a phonon laser at room temperature and ambient conditions with optical pump power as low as 1 mW. We also show the possibility to cascade this process, achieving a frequency comb generation with more than 30 harmonic lines. These results open a new path to achieve strong bidirectional coupling between integrated waveguides and SAW, with a great potential for a wide range of applications in quantum and classical domains. △ Less

Submitted 11 March, 2022; originally announced March 2022.

Three-dimensional electrical control of the excitonic fine structure for a quantum dot in a cavity

Authors: H. Ollivier, Priya, A. Harouri, I. Sagnes, A. Lemaître, O. Krebs, L. Lanco, N. D. Lanzillotti-Kimura, M. Esmann, P. Senellart

Abstract: The excitonic fine structure plays a key role for the quantum light generated by semiconductor quantum dots, both for entangled photon pairs and single photons. Controlling the excitonic fine structure has been demonstrated using electric, magnetic, or strain fields, but not for quantum dots in optical cavities, a key requirement to obtain high source efficiency and near-unity photon indistinguish… ▽ More The excitonic fine structure plays a key role for the quantum light generated by semiconductor quantum dots, both for entangled photon pairs and single photons. Controlling the excitonic fine structure has been demonstrated using electric, magnetic, or strain fields, but not for quantum dots in optical cavities, a key requirement to obtain high source efficiency and near-unity photon indistinguishability. Here, we demonstrate the control of the fine structure splitting for quantum dots embedded in micropillar cavities. We propose a scheme based on remote electrical contacts connected to the pillar cavity through narrow ridges. Numerical simulations show that such a geometry allows for a three-dimensional control of the electrical field. We experimentally demonstrate tuning and reproducible canceling of the fine structure, a crucial step for the reproducibility of quantum light source technology. △ Less

Submitted 1 December, 2021; originally announced December 2021.

Comments: 9 pages, 7 figures

Generating 10-GHz phonons in nanostructured silicon membrane optomechanical cavity

Authors: Jianhao Zhang, Xavier Le Roux, Miguel Montesinos-Ballester, Omar Ortiz, Delphine Marris-Morini, Eric Cassan, Laurent Vivien, Norberto Daniel Lanzillotti-Kimura, Carlos Alonso-Ramos

Abstract: Flexible control of photons and phonons in silicon nanophotonic waveguides is a key feature for emerging applications in communications, sensing and quantum technologies. Strong phonon leakage towards the silica under-cladding hampers optomechanical interactions in silicon-on-insulator. This limitation has been circumvented by totally or partially removing the silica under-cladding to form pedesta… ▽ More Flexible control of photons and phonons in silicon nanophotonic waveguides is a key feature for emerging applications in communications, sensing and quantum technologies. Strong phonon leakage towards the silica under-cladding hampers optomechanical interactions in silicon-on-insulator. This limitation has been circumvented by totally or partially removing the silica under-cladding to form pedestal or silicon membrane waveguides. Remarkable optomechanical interactions have been demonstrated in silicon using pedestal strips, membrane ribs, and photonic/phononic crystal membrane waveguides. Still, the mechanical frequencies are limited to the 1-5 GHz range. Here, we exploit the periodic nanostructuration in Si membrane gratings to shape GHz phononic modes and near-infrared photonic modes, achieving ultrahigh mechanical frequency (10 GHz) and strong photon-phonon overlap (61.5%) simultaneously. Based on this concept, we experimentally demonstrate a one-dimension optomechanical micro-resonator with a high mechanical frequency of 10 GHz and a quality factor of 1000. These results were obtained at room temperature and ambient conditions with an intracavity optical power below 1 mW, illustrating the efficient optical driving of the mechanical mode enabled by the proposed approach. △ Less

Submitted 26 March, 2021; originally announced March 2021.

Silicon-on-insulator optomechanical microresonator with tight photon and phonon confinement

Authors: Jianhao Zhang, Xavier Le Roux, Miguel Montesinos-Ballester, Omar Ortiz, Delphine Marris-Morini, Laurent Vivien, Norberto Daniel Lanzillotti-Kimura, Carlos Alonso-Ramos

Abstract: The implementation of optomechanical devices in silicon-on-insulator (SOI), the canonical silicon photonics technology is seriously hampered by the strong phonon leakage into the silica under-cladding. This limitation has been partially circumvented by total or partial removal of the silica under-cladding to form Si membranes or pedestal waveguides. However, this approach complicates integration w… ▽ More The implementation of optomechanical devices in silicon-on-insulator (SOI), the canonical silicon photonics technology is seriously hampered by the strong phonon leakage into the silica under-cladding. This limitation has been partially circumvented by total or partial removal of the silica under-cladding to form Si membranes or pedestal waveguides. However, this approach complicates integration with standard silicon optoelectronics circuitry, limiting the versatility and application of the strategy. Here, we propose and demonstrate a new strategy to confine photons and phonons in SOI without removing the silica under-cladding. Inspired by end-fire antenna arrays, we implement a periodic nanostructuration of silicon that simultaneously enables cancelling phonon leakage by destructive interference and guiding of photons by metamaterial index confinement. Based on this concept, we implement SOI optomechanical micro-resonators yielding remarkable optomechanical coupling (go=49 kHz) between 0.66 GHz mechanical modes and near-infrared optical modes. The mechanical mode exhibits a measured quality factor of Qm = 730, the largest reported for SOI optomechanical resonators, without silica removal. This value compares favorably with state-of-the-art Si membrane waveguides recently used to demonstrate remarkable Brillouin interactions in silicon (Qm ~ 700). These results open a new path for develo** optomechanics in SOI without the need for silica removal, allowing seamless co-integration with current Si optoelectronics circuits, with a great potential for applications in communications, sensing, metrology, and quantum technologies. △ Less

Submitted 16 March, 2021; v1 submitted 15 March, 2021; originally announced March 2021.

Fiber-based angular filtering for high-resolution Brillouin spectroscopy in the 20-300 GHz frequency range

Authors: A. Rodriguez, Priya, O. Ortiz, P. Senellart, C. Gomez-Carbonell, A. Lemaître, M. Esmann, N. D. Lanzillotti-Kimura

Abstract: Brillouin spectroscopy emerges as a promising non-invasive tool for nanoscale imaging and sensing. One-dimensional semiconductor superlattice structures are eminently used for selectively enhancing the generation or detection of phonons at few GHz. While commercially available Brillouin spectrometers provide high-resolution spectra, they consist of complex experimental techniques and are not suita… ▽ More Brillouin spectroscopy emerges as a promising non-invasive tool for nanoscale imaging and sensing. One-dimensional semiconductor superlattice structures are eminently used for selectively enhancing the generation or detection of phonons at few GHz. While commercially available Brillouin spectrometers provide high-resolution spectra, they consist of complex experimental techniques and are not suitable for semiconductor cavities operating at a wide range of optical wavelengths. We develop a pragmatic experimental approach for conventional Brillouin spectroscopy integrating a widely tunable excitation-source. Our setup combines a fibered-based angular filtering and a spectral filtering based on a single etalon and a double grating spectrometer. This configuration allows probing confined acoustic phonon modes in the 20-300 GHz frequency range with excellent laser rejection and high spectral resolution. Remarkably, our scheme based on the excitation and collection of the enhanced Brillouin scattering signals through the optical cavity, allows for better angular filtering for low phonon frequency. It can be implemented for the study of cavity optomechanics and stimulated Brillouin scattering over broadband optical and acoustic frequency ranges. △ Less

Submitted 15 November, 2020; originally announced November 2020.

Fiber-integrated microcavities for efficient generation of coherent acoustic phonons

Authors: O. Ortiz, F. Pastier, A. Rodriguez, Priya, A. Lemaitre, C. Gomez-Carbonell, I. Sagnes, A. Harouri, P. Senellart, V. Giesz, M. Esmann, N. D. Lanzillotti-Kimura

Abstract: Coherent phonon generation by optical pump-probe experiments has enabled the study of acoustic properties at the nanoscale in planar heterostructures, plasmonic resonators, micropillars and nanowires. Focalizing both pump and probe on the same spot of the sample is a critical part of pump-probe experiments. This is particularly relevant in the case of small objects. The main practical challenges f… ▽ More Coherent phonon generation by optical pump-probe experiments has enabled the study of acoustic properties at the nanoscale in planar heterostructures, plasmonic resonators, micropillars and nanowires. Focalizing both pump and probe on the same spot of the sample is a critical part of pump-probe experiments. This is particularly relevant in the case of small objects. The main practical challenges for the actual implementation of this technique are: stability of the spatio-temporal overlap, reproducibility of the focalization and optical mode matching conditions. In this work, we solve these three challenges for the case of planar and micropillar optophononic cavities. We integrate the studied samples to single mode fibers lifting the need for focusing optics to excite and detect coherent acoustic phonons. The resulting excellent reflectivity contrast of at least 66% achieved in our samples allows us to observe stable coherent phonon signals over at least a full day and signals at extremely low excitation powers of 1uW. The monolithic sample structure is transportable and could provide a means to perform reproducible plug-and-play experiments. △ Less

Submitted 27 August, 2020; originally announced August 2020.

Comments: 8 pages, 3 figures

Topological optical and phononic interface mode by simultaneous band inversion

Authors: O. Ortiz, P. Priya, A. Rodriguez, A. Lemaitre, M. Esmann, N. D. Lanzillotti-Kimura

Abstract: Interface modes have been widely explored in the field of electronics, optics, acoustics and nanophononics. One strategy to generate them is band inversion in one-dimensional superlattices. Most realizations of this type of topological states have so far been explored for a single kind of excitation. Despite its potential in the manipulation and engineering of interactions, platforms for the simul… ▽ More Interface modes have been widely explored in the field of electronics, optics, acoustics and nanophononics. One strategy to generate them is band inversion in one-dimensional superlattices. Most realizations of this type of topological states have so far been explored for a single kind of excitation. Despite its potential in the manipulation and engineering of interactions, platforms for the simultaneous topological confinement of multiple excitations remain an open challenge. GaAs/AlAs heterostructures exhibit enhanced optomechanical interactions due to the intrinsic colocalization of light and sound. In this work, we designed, fabricated, and experimentally studied a multilayered structure based on GaAs/AlAs. Due to the simultaneously inverted band structures for light and phonons, colocalized interface modes for both 1.34 eV photons and 18 GHz phonons appear. We experimentally validated the concept by optical reflectivity and coherent phonon generation and detection. Furthermore, we theoretically analyzed the performance of different topological designs presenting colocalized states in time-domain Brillouin scattering and deduce engineering rules. Potential future applications include the engineering of robust optomechanical resonators, compatible with the incorporation of active media such as quantum wells and quantum dots. △ Less

Submitted 29 July, 2020; originally announced July 2020.

Comments: 11 pages, 5 figures, 34 references

Mesoporous Thin-Films for Acoustic Devices in the Gigahertz Range

Authors: N. Lopez-Abdala, M. Esmann, M. C. Fuertes, P. C. Angelomé, O. Ortiz, A. Bruchhausen, H. Pastoriza, B. Perrin, G. J. A. A. Soler-Illia, N. D. Lanzillotti-Kimura

Abstract: The coherent manipulation of acoustic waves on the nanoscale usually requires multilayers with thicknesses and interface roughness defined down to the atomic monolayer. This results in expensive devices with predetermined functionality. Nanoscale mesoporous materials present high surface-to-volume ratio and tailorable mesopores, which allow the incorporation of chemical functionalization to nanoac… ▽ More The coherent manipulation of acoustic waves on the nanoscale usually requires multilayers with thicknesses and interface roughness defined down to the atomic monolayer. This results in expensive devices with predetermined functionality. Nanoscale mesoporous materials present high surface-to-volume ratio and tailorable mesopores, which allow the incorporation of chemical functionalization to nanoacoustics. However, the presence of pores with sizes comparable to the acoustic wavelength is intuitively perceived as a major roadblock in nanoacoustics. Here we present multilayered nanoacoustic resonators based on mesoporous SiO$_2$ thin-films showing acoustic resonances in the 5-100 GHz range. We characterize the acoustic response of the system using coherent phonon generation experiments. Despite resonance wavelengths comparable to the pore size, we observe for the first time unexpectedly well-defined acoustic resonances with Q-factors around 10. Our results open the path to a promising platform for nanoacoustic sensing and reconfigurable acoustic nanodevices based on soft, inexpensive fabrication methods. △ Less

Submitted 8 April, 2020; originally announced April 2020.

Phonon engineering with superlattices: generalized nanomechanical potentials

Authors: O. Ortiz, M. Esmann, N. D. Lanzillotti-Kimura

Abstract: Earlier implementations to simulate coherent wave propagation in one-dimensional potentials using acoustic phonons with gigahertz-terahertz frequencies were based on coupled nanoacoustic resonators. Here, we generalize the concept of adiabatic tuning of periodic superlattices for the implementation of effective one-dimensional potentials giving access to cases that cannot be realized by previously… ▽ More Earlier implementations to simulate coherent wave propagation in one-dimensional potentials using acoustic phonons with gigahertz-terahertz frequencies were based on coupled nanoacoustic resonators. Here, we generalize the concept of adiabatic tuning of periodic superlattices for the implementation of effective one-dimensional potentials giving access to cases that cannot be realized by previously reported phonon engineering approaches, in particular the acoustic simulation of electrons and holes in a quantum well or a double well potential. In addition, the resulting structures are much more compact and hence experimentally feasible. We demonstrate that potential landscapes can be tailored with great versatility in these multilayered devices, apply this general method to the cases of parabolic, Morse and double-well potentials and study the resulting stationary phonon modes. The phonon cavities and potentials presented in this work could be probed by all-optical techniques like pump-probe coherent phonon generation and Brillouin scattering. △ Less

Submitted 19 March, 2019; originally announced March 2019.

Journal ref: Phys. Rev. B 100, 085430 (2019)

Brillouin Scattering in Hybrid Optophononic Bragg Micropillar Resonators at 300 GHz

Authors: M. Esmann, F. R. Lamberti, A. Harouri, L. Lanco, I. Sagnes, I. Favero, G. Aubin, C. Gomez-Carbonell, A. Lemaitre, O. Krebs, P. Senellart, N. D. Lanzillotti-Kimura

Abstract: We introduce a monolithic Brillouin generator based on a semiconductor micropillar cavity embedding a high frequency nanoacoustic resonator operating in the hundreds of GHz range. The concept of two nested resonators allows an independent design of the ultrahigh frequency Brillouin spectrum and of the optical device. We develop an optical free-space technique to characterize spontaneous Brillouin… ▽ More We introduce a monolithic Brillouin generator based on a semiconductor micropillar cavity embedding a high frequency nanoacoustic resonator operating in the hundreds of GHz range. The concept of two nested resonators allows an independent design of the ultrahigh frequency Brillouin spectrum and of the optical device. We develop an optical free-space technique to characterize spontaneous Brillouin scattering in this monolithic device and propose a measurement protocol that maximizes the Brillouin generation efficiency in the presence of optically induced thermal effects. The compact and versatile Brillouin generator studied here could be readily integrated into fibered and on-chip architectures. △ Less

Submitted 12 December, 2018; originally announced December 2018.

Comments: 9 pages, 4 figures

Coherent generation and detection of acoustic phonons in topological nanocavities

Authors: G. Arregui, O. Ortíz, M. Esmann, C. M. Sotomayor-Torres, C. Gomez-Carbonell, O. Mauguin, B. Perrin, A. Lemaître, P. D. García, N. D. Lanzillotti-Kimura

Abstract: Inspired by concepts developed for fermionic systems in the framework of condensed matter physics, topology and topological states are recently being explored also in bosonic systems. The possibility of engineering systems with unidirectional wave propagation and protected against disorder is at the heart of this growing interest. Topogical acoustic effects have been observed in a variety of syste… ▽ More Inspired by concepts developed for fermionic systems in the framework of condensed matter physics, topology and topological states are recently being explored also in bosonic systems. The possibility of engineering systems with unidirectional wave propagation and protected against disorder is at the heart of this growing interest. Topogical acoustic effects have been observed in a variety of systems, most of them based on kHz-MHz sound waves, with typical wavelength of the order of the centimeter. Recently, some of these concepts have been successfully transferred to acoustic phonons in nanoscaled multilayered systems. The reported demonstration of confined topological phononic modes was based on Raman scattering spectroscopy, yet the resolution did not suffice to determine lifetimes and to identify other acoustic modes in the system. Here, we use time-resolved pump-probe measurements using an asynchronous optical sampling (ASOPS) technique to overcome these resolution limitations. By means of one-dimensional GaAs/AlAs distributed Bragg reflectors (DBRs) as building blocks, we engineer high frequency ($\sim$ 200 GHz) topological acoustic interface states. We are able to clearly distinguish confined topological states from stationary band edge modes. The detection scheme reflects the symmetry of the modes directly through the selection rules, evidencing the topological nature of the measured confined state. These experiments enable a new tool in the study of the more complex topology-driven phonon dynamics such as phonon nonlinearities and optomechanical systems with simultaneous confinement of light and sound. △ Less

Submitted 24 November, 2018; originally announced November 2018.

Comments: 6 pages, 3 figures

Topological acoustics in coupled nanocavity arrays

Authors: M. Esmann, F. R. Lamberti, A. Lemaitre, N. D. Lanzillotti-Kimura

Abstract: The Su-Schrieffer-Heeger (SSH) model is likely the simplest one-dimensional concept to study non-trivial topological phases and topological excitations. Originally developed to explain the electric conductivity of polyacetylene, it has become a platform for the study of topological effects in electronics, photonics and ultra-cold atomic systems. Here, we propose an experimentally feasible implemen… ▽ More The Su-Schrieffer-Heeger (SSH) model is likely the simplest one-dimensional concept to study non-trivial topological phases and topological excitations. Originally developed to explain the electric conductivity of polyacetylene, it has become a platform for the study of topological effects in electronics, photonics and ultra-cold atomic systems. Here, we propose an experimentally feasible implementation of the SSH model based on coupled one-dimensional acoustic nanoresonators working in the GHz-THz range. In this simulator it is possible to implement different signs in the nearest neighbor interaction terms, showing full tunability of all parameters in the SSH model. Based on this concept we construct topological transition points generating nanophononic edge and interface states and propose an easy scheme to experimentally probe their spatial complex amplitude distribution directly by well-established optical pump-probe techniques. △ Less

Submitted 11 May, 2018; originally announced May 2018.

Comments: 10 pages, 4 figures

Journal ref: Phys. Rev. B 98, 161109 (2018)

Polarization-Controlled Coherent Phonon Generation in Acousto-Plasmonic Metasurfaces

Authors: N. D. Lanzillotti-Kimura, K. P. O'Brien, J. Rho, H. Suchowski, X. Yin, X. Zhang

Abstract: Acoustic vibrations at the nanoscale (GHz-THz frequencies) and their interactions with electrons, photons and other excitations are the heart of an emerging field in physics: nanophononics. The design of ultrahigh frequency acoustic-phonon transducers, with tunable frequency, and easy to integrate in complex systems is still an open and challenging problem for the development of acoustic nanoscopi… ▽ More Acoustic vibrations at the nanoscale (GHz-THz frequencies) and their interactions with electrons, photons and other excitations are the heart of an emerging field in physics: nanophononics. The design of ultrahigh frequency acoustic-phonon transducers, with tunable frequency, and easy to integrate in complex systems is still an open and challenging problem for the development of acoustic nanoscopies and phonon lasers. Here we show how an optimized plasmonic metasurface can act as a high-frequency phonon transducer. We report pump-probe experiments in metasurfaces composed of an array of gold nanostructures, revealing that such arrays can act as efficient and tunable photon-phonon transducers, with a strong spectral dependence on the excitation rate and laser polarization. We anticipate our work to be the starting point for the engineering of phononic metasurfaces based on plasmonic nanostructures. △ Less

Submitted 11 May, 2018; originally announced May 2018.

Comments: 7 pages, 3 figures

Journal ref: Phys. Rev. B 97, 235403 (2018)

Topological nanophononic states by band inversion

Authors: Martin Esmann, Fabrice Roland Lamberti, Pascale Senellart, Ivan Favero, Olivier Krebs, Loic Lanco, Carmen Gomez Carbonell, Aristide Lemaitre, Norberto Daniel Lanzillotti-Kimura

Abstract: Nanophononics is essential for the engineering of thermal transport in nanostructured electronic devices, it greatly facilitates the manipulation of mechanical resonators in the quantum regime, and could unveil a new route in quantum communications using phonons as carriers of information. Acoustic phonons also constitute a versatile platform for the study of fundamental wave dynamics, including B… ▽ More Nanophononics is essential for the engineering of thermal transport in nanostructured electronic devices, it greatly facilitates the manipulation of mechanical resonators in the quantum regime, and could unveil a new route in quantum communications using phonons as carriers of information. Acoustic phonons also constitute a versatile platform for the study of fundamental wave dynamics, including Bloch oscillations, Wannier Stark ladders and other localization phenomena. Many of the phenomena studied in nanophononics were indeed inspired by their counterparts in optics and electronics. In these fields, the consideration of topological invariants to control wave dynamics has already had a great impact for the generation of robust confined states. Interestingly, the use of topological phases to engineer nanophononic devices remains an unexplored and promising field. Conversely, the use of acoustic phonons could constitute a rich platform to study topological states. Here, we introduce the concept of topological invariants to nanophononics and experimentally implement a nanophononic system supporting a robust topological interface state at 350 GHz. The state is constructed through band inversion, i.e. by concatenating two semiconductor superlattices with inverted spatial mode symmetries. The existence of this state is purely determined by the Zak phases of the constituent superlattices, i.e. that one-dimensional Berry phase. We experimentally evidenced the mode through Raman spectroscopy. The reported robust topological interface states could become part of nanophononic devices requiring resonant structures such as sensors or phonon lasers. △ Less

Submitted 24 February, 2018; originally announced February 2018.

Comments: 21 pages, 7 figures

Journal ref: Phys. Rev. B 97, 155422 (2018)

Nanomechanical resonators based on adiabatic periodicity-breaking in a superlattice

Authors: F. R. Lamberti, M. Esmann, A. Lemaitre, C. Gomez Carbonell, O. Krebs, I. Favero, B. Jusserand, P. Senellart, L. Lanco, N. D. Lanzillotti-Kimura

Abstract: We propose a novel acoustic cavity design where we confine a mechanical mode by adiabatically changing the acoustic properties of a GaAs/AlAs superlattice. By means of high resolution Raman scattering measurements, we experimentally demonstrate the presence of a confined acoustic mode at a resonance frequency around 350 GHz. We observe an excellent agreement between the experimental data and numer… ▽ More We propose a novel acoustic cavity design where we confine a mechanical mode by adiabatically changing the acoustic properties of a GaAs/AlAs superlattice. By means of high resolution Raman scattering measurements, we experimentally demonstrate the presence of a confined acoustic mode at a resonance frequency around 350 GHz. We observe an excellent agreement between the experimental data and numerical simulations based on a photoelastic model. We demonstrate that the spatial profile of the confined mode can be tuned by changing the magnitude of the adiabatic deformation, leading to strong variations of its mechanical quality factor and Raman scattering cross section. The reported alternative confinement method could lead to the development of a novel generation of nanophononic and optomechanical systems. △ Less

Submitted 18 August, 2017; originally announced August 2017.

Optomechanical properties of GaAs/AlAs micropillar resonators operating in the 18 GHz range

Authors: F. R. Lamberti, Q. Yao, L. Lanco, D. T. Nguyen, M. Esmann, A. Fainstein, P. Sesin, S. Anguiano, V. Villafañe, A. Bruchhausen, P. Senellart, I. Favero, N. D. Lanzillotti-Kimura

Abstract: Recent experiments demonstrated that GaAs-AlAs based micropillar cavities are promising systems for quantum optomechanics, allowing the simultaneous three-dimensional confinement of near-infrared photons and acoustic phonons in the 18-100 GHz range. Here, we investigate through numerical simulations the optomechanical properties of this new platform. We evidence how the Poisson's ratio and semicon… ▽ More Recent experiments demonstrated that GaAs-AlAs based micropillar cavities are promising systems for quantum optomechanics, allowing the simultaneous three-dimensional confinement of near-infrared photons and acoustic phonons in the 18-100 GHz range. Here, we investigate through numerical simulations the optomechanical properties of this new platform. We evidence how the Poisson's ratio and semiconductor-vacuum boundary conditions lead to very distinct features in the mechanical and optical three dimensional confinement. We find a strong dependence of the mechanical quality factor and strain distribution on the micropillar radius, in great contrast to what is predicted and observed in the optical domain. The derived optomechanical coupling constants g_0 reach ultra-large values in the 10^6 rad/s range. △ Less

Submitted 26 July, 2017; originally announced July 2017.

Tomography of optical polarization rotation induced by a quantum dot-cavity device

Authors: C. Antón, C. A. Kessler, P. Hilaire, J. Demory, C. Gómez, A. Lemaître, I. Sagnes, N. D. Lanzillotti-Kimura, O. Krebs, N. Somaschi, P. Senellart, L. Lanco

Abstract: We introduce a tomography approach to describe the optical response of a cavity quantum electrodynamics device, beyond the semiclassical image of polarization rotation, by analyzing the polarization density matrix of the reflected photons in the Poincaré sphere. Applying this approach to an electrically-controlled quantum dot-cavity device, we show that a single resonantly-excited quantum dot indu… ▽ More We introduce a tomography approach to describe the optical response of a cavity quantum electrodynamics device, beyond the semiclassical image of polarization rotation, by analyzing the polarization density matrix of the reflected photons in the Poincaré sphere. Applying this approach to an electrically-controlled quantum dot-cavity device, we show that a single resonantly-excited quantum dot induces a large optical polarization rotation by $20^\circ$ in latitude and longitude in the Poincaré sphere, with a polarization purity remaining above $84\%$. The quantum dot resonance fluorescence is shown to contribute to the polarization rotation via its coherent part, whereas its incoherent part contributes to degrading the polarization purity. △ Less

Submitted 11 March, 2017; originally announced March 2017.

Comments: Main text: 6 pages, 4 figures Supplementary material: 4 pages, 1 figure

Time-Resolved Cavity Nano-Optomechanics in the 20-100 GHz range

Authors: S. Anguiano, A. E. Bruchhausen, B. Jusserand, I. Favero, F. R. Lamperti, L. Lanco, I. Sagnes, A. Lemaître, N. D. Lanzillotti-Kimura, P. Senellart, A. Fainstein

Abstract: Applications of cavity optomechanics span from gravitational wave detection to the study of quantum motion states in mesoscopic mechanical systems. The engineering of resonators supporting strongly interacting mechanical and optical modes is central to these developments. However, current technological and experimental approaches limit the accessible mechanical frequencies to a few GHz, imposing h… ▽ More Applications of cavity optomechanics span from gravitational wave detection to the study of quantum motion states in mesoscopic mechanical systems. The engineering of resonators supporting strongly interacting mechanical and optical modes is central to these developments. However, current technological and experimental approaches limit the accessible mechanical frequencies to a few GHz, imposing hard constraints on quantum mechanical studies. Here we demonstrate the optical control of 20-100~GHz mechanical modes confined in the three dimensions within semiconductor nano-optomechanical pillar cavities. We use a time-resolved transient optical reflectivity technique and access both the energy spectrum and dynamics of the mechanical modes at the picosecond timescale. A strong increase of the optomechanical coupling upon reducing the pillar size is observed together with unprecedent room temperature Q-frequency products above $10^{14}$. The measurements also reveal sideband generation in the optomechanical response. Such resonators can naturally integrate quantum wells and quantum dots, enabling novel applications in cavity quantum electrodynamics and high frequency nanomechanics. △ Less

Submitted 13 October, 2016; originally announced October 2016.

Acoustic Localization Phenomena in Ferroelectric Nanophononic Devices

Authors: A. Bruchhausen, N. D. Lanzillotti-Kimura, B. Jusserand, A. Soukiassian, D. G. Schlom, T. Dekorsy, A. Fainstein

Abstract: The engineering of phononic resonances in ferroelectric structures appears as a new knob in the design and realization of novel multifunctional devices. In this work we experimentally study phononic resonators based on insulating (BaTiO3, SrTiO3) and metallic (SrRuO3) oxides. We experimentally demonstrate the confinement of acoustic waves in the 100 GHz frequency range in a phonon nanocavity, the… ▽ More The engineering of phononic resonances in ferroelectric structures appears as a new knob in the design and realization of novel multifunctional devices. In this work we experimentally study phononic resonators based on insulating (BaTiO3, SrTiO3) and metallic (SrRuO3) oxides. We experimentally demonstrate the confinement of acoustic waves in the 100 GHz frequency range in a phonon nanocavity, the time and spatial beatings resulting from the coupling of two different hybrid nanocavities forming an acoustic molecule, and the direct measurement of Bloch-like oscillations of acoustic phonons in a system formed by 10 coupled resonators. By means of coherent phonon generation techniques we study the phonon dynamics directly in the time-domain. The metallic SrRuO3 introduces a local phonon generator and transducer that allows for the spatial, spectral and time-domain monitoring of the complex generated waves. Our results introduce ferroelectric cavity systems as a new tool for the study of complex wave localization phenomena at the nanoscale. △ Less

Submitted 30 April, 2016; originally announced May 2016.

Comments: 15 pages, 5 figures

Journal ref: Phys. Rev. Materials 2, 106002 (2018)

Coherent control of a solid-state quantum bit with few-photon pulses

Authors: V. Giesz, N. Somaschi, G. Hornecker, T. Grange, B. Reznychenko, L. De Santis, J. Demory, C. Gomez, I. Sagnes, A. Lemaitre, O. Krebs, N. D. Lanzillotti-Kimura, L. Lanco, A. Auffeves, P. Senellart

Abstract: Single photons are the natural link between the nodes of a quantum network: they coherently propagate and interact with many types of quantum bits including natural and artificial atoms. Ideally, one atom should deterministically control the state of a photon and vice-versa. The interaction between free space photons and an atom is however intrinsically weak and many efforts have been dedicated to… ▽ More Single photons are the natural link between the nodes of a quantum network: they coherently propagate and interact with many types of quantum bits including natural and artificial atoms. Ideally, one atom should deterministically control the state of a photon and vice-versa. The interaction between free space photons and an atom is however intrinsically weak and many efforts have been dedicated to develop an efficient interface. Recently, it was shown that the propagation of light can be controlled by an atomic resonance coupled to a cavity or a single mode waveguide. Here we demonstrate that the state of a single artificial atom in a cavity can be efficiently controlled by a few-photon pulse. We study a quantum dot optimally coupled to an electrically-controlled cavity device, acting as a near optimal one-dimensional atom. By monitoring the exciton population through resonant fluorescence, we demonstrate Rabi oscillations with a $π$-pulse of only 3.8 photons on average. The probability to flip the exciton quantum bit with a single photon Fock state is calculated to reach 55% in the same device. △ Less

Submitted 15 December, 2015; originally announced December 2015.

Phonon-tuned bright single-photon source

Authors: Simone Luca Portalupi, Gaston Hornecker, Valérian Giesz, Thomas Grange, Aristide Lemaître, Justin Demory, Isabelle Sagnes, Norberto D. Lanzillotti-Kimura, Loïc Lanco, Alexia Auffèves, Pascale Senellart

Abstract: Pure and bright single photon sources have recently been obtained by inserting solid-state emitters in photonic nanowires or microcavities. The cavity approach presents the attractive possibility to greatly increase the source operation frequency. However, it is perceived as technologically demanding because the emitter resonance must match the cavity resonance. Here we show that the spectral matc… ▽ More Pure and bright single photon sources have recently been obtained by inserting solid-state emitters in photonic nanowires or microcavities. The cavity approach presents the attractive possibility to greatly increase the source operation frequency. However, it is perceived as technologically demanding because the emitter resonance must match the cavity resonance. Here we show that the spectral matching requirement is actually strongly lifted by the intrinsic coupling of the emitter to its environment. A single photon source consisting of a single InGaAs quantum dot inserted in a micropillar cavity is studied. Phonon coupling results in a large Purcell effect even when the quantum dot is detuned from the cavity resonance. The phonon-assisted cavity enhanced emission is shown to be a good single-photon source, with a brightness exceeding $40$ \% for a detuning range covering 15 cavity linewidths. △ Less

Submitted 18 December, 2014; originally announced December 2014.

Comments: 5 pages, 4 figures + supplementary