-
Optimizing Energy Efficiency of 5G RedCap Beam Management for Smart Agriculture Applications
Authors:
Manishika Rawat,
Matteo Pagin,
Marco Giordani,
Louis-Adrien Dufrene,
Quentin Lampin,
Michele Zorzi
Abstract:
Beam management in 5G NR involves the transmission and reception of control signals such as Synchronization Signal Blocks (SSBs), crucial for tasks like initial access and/or channel estimation. However, this procedure consumes energy, which is particularly challenging to handle for battery-constrained nodes such as RedCap devices. Specifically, in this work we study a mid-market Internet of Thing…
▽ More
Beam management in 5G NR involves the transmission and reception of control signals such as Synchronization Signal Blocks (SSBs), crucial for tasks like initial access and/or channel estimation. However, this procedure consumes energy, which is particularly challenging to handle for battery-constrained nodes such as RedCap devices. Specifically, in this work we study a mid-market Internet of Things (IoT) Smart Agriculture (SmA) deployment where an Unmanned Autonomous Vehicle (UAV) acts as a base station "from the sky" (UAV-gNB) to monitor and control ground User Equipments (UEs) in the field. Then, we formalize a multi-variate optimization problem to determine the optimal beam management design for RedCap SmA devices in order to reduce the energy consumption at the UAV-gNB. Specifically, we jointly optimize the transmission power and the beamwidth at the UAV-gNB. Based on the analysis, we derive the so-called "regions of feasibility," i.e., the upper limit(s) of the beam management parameters for which RedCap Quality of Service (QoS) and energy constraints are met. We study the impact of factors like the total transmission power at the gNB, the Signal-to-Noise Ratio (SNR) threshold for successful packet decoding, the number of UEs in the region, and the misdetection probability. Simulation results demonstrate that there exists an optimal configuration for beam management to promote energy efficiency, which depends on the speed of the UEs, the beamwidth, and other network parameters.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
Minimizing Energy Consumption for 5G NR Beam Management for RedCap Devices
Authors:
Manishika Rawat,
Matteo Pagin,
Marco Giordani,
Louis-Adrien Dufrene,
Quentin Lampin,
Michele Zorzi
Abstract:
In 5G New Radio (NR), beam management entails periodic and continuous transmission and reception of control signals in the form of synchronization signal blocks (SSBs), used to perform initial access and/or channel estimation. However, this procedure demands continuous energy consumption, which is particularly challenging to handle for low-cost, low-complexity, and battery-constrained devices, suc…
▽ More
In 5G New Radio (NR), beam management entails periodic and continuous transmission and reception of control signals in the form of synchronization signal blocks (SSBs), used to perform initial access and/or channel estimation. However, this procedure demands continuous energy consumption, which is particularly challenging to handle for low-cost, low-complexity, and battery-constrained devices, such as RedCap devices to support mid-market Internet of Things (IoT) use cases. In this context, this work aims at reducing the energy consumption during beam management for RedCap devices, while ensuring that the desired Quality of Service (QoS) requirements are met. To do so, we formalize an optimization problem in an Indoor Factory (InF) scenario to select the best beam management parameters, including the beam update periodicity and the beamwidth, to minimize energy consumption based on users' distribution and their speed. The analysis yields the regions of feasibility, i.e., the upper limit(s) on the beam management parameters for RedCap devices, that we use to provide design guidelines accordingly.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
5G NR-Light at Millimeter Waves: Design Guidelines for Mid-Market IoT Use Cases
Authors:
Matteo Pagin,
Tommaso Zugno,
Marco Giordani,
Louis-Adrien Dufrene,
Quentin Lampin,
Michele Zorzi
Abstract:
5th generation (5G) systems have been designed with three main objectives in mind: increasing throughput, reducing latency, and enabling reliable communications. To meet these (often conflicting) constraints, the 3GPP released a set of specifications for 5G NR, one of the main innovations being the support for communications in the millimeter wave (mmWave) bands. However, how to implement lower co…
▽ More
5th generation (5G) systems have been designed with three main objectives in mind: increasing throughput, reducing latency, and enabling reliable communications. To meet these (often conflicting) constraints, the 3GPP released a set of specifications for 5G NR, one of the main innovations being the support for communications in the millimeter wave (mmWave) bands. However, how to implement lower complexity, energy efficient, mid-market Internet of Things (IoT) applications is still an on-going investigation, currently led by the 3GPP which is extending the NR standard with NR-Light specifications to support devices with reduced capabilities (REDCAP). While REDCAP devices may also operate at mmWaves to improve the network performance, hardware/software simplifications are needed to support balanced and mixed requirements compared to 5G NR systems. In this context, the contributions of this paper are threefold. First, we present some NR-Light use cases for which the support of the mmWave bands is desirable. Second, we describe how 5G NR can be simplified to achieve NR-Light requirements and expectations. Finally, we evaluate via simulation the performance of NR-Light devices operating at mmWaves in an industrial IoT setup, in terms of cost and complexity, throughput, and latency.
△ Less
Submitted 9 January, 2023; v1 submitted 30 September, 2021;
originally announced September 2021.
-
2D Time-frequency interference modelling using stochastic geometry for performance evaluation in Low-Power Wide-Area Networks
Authors:
Zhuocheng Li,
Steeve Zozor,
Jean-Marc Brossier,
Nadège Varsier,
Quentin Lampin
Abstract:
In wireless networks, interferences between trans- missions are modelled either in time or frequency domain. In this article, we jointly analyze interferences in the time- frequency domain using a stochastic geometry model assuming the total time-frequency resources to be a two-dimensional plane and transmissions from Internet of Things (IoT) devices time- frequency patterns on this plane. To eval…
▽ More
In wireless networks, interferences between trans- missions are modelled either in time or frequency domain. In this article, we jointly analyze interferences in the time- frequency domain using a stochastic geometry model assuming the total time-frequency resources to be a two-dimensional plane and transmissions from Internet of Things (IoT) devices time- frequency patterns on this plane. To evaluate the interference, we quantify the overlap between the information packets: provided that the overlap is not too strong, the packets are not necessarily lost due to capture effect. This flexible model can be used for multiple medium access scenarios and is especially adapted to the random time-frequency access schemes used in Low-Power Wide-Area Networks (LPWANs). By characterizing the outage probability and throughput, our approach permits to evaluate the performance of two representative LPWA technologies Sigfox{\textsuperscript \textregistered} and LoRaWA{\textsuperscript \textregistered}.
△ Less
Submitted 12 November, 2016; v1 submitted 24 May, 2016;
originally announced June 2016.
