-
High speed silicon photonic electro-optic Kerr modulation
Authors:
Jonathan Peltier,
Weiwei Zhang,
Leopold Virot,
Christian Lafforgue,
Lucas Deniel,
Delphine Marris-Morini,
Guy Aubin,
Farah Amar,
Denh Tran,
Xingzhao Yan,
Callum G. Littlejohns,
Carlos Alonso-Ramos,
David J. Thomson,
Graham Reed,
Laurent Vivien
Abstract:
Electro-optic silicon-based modulators contribute to ease the integration of high-speed and low-power consumption circuits for classical optical communications or quantum computers. However, the inversion symmetry in the silicon crystal structure inhibits the use of Pockels effect. An electric field-induced optical modulation equivalent to a Pockels effect can nevertheless be achieved in silicon b…
▽ More
Electro-optic silicon-based modulators contribute to ease the integration of high-speed and low-power consumption circuits for classical optical communications or quantum computers. However, the inversion symmetry in the silicon crystal structure inhibits the use of Pockels effect. An electric field-induced optical modulation equivalent to a Pockels effect can nevertheless be achieved in silicon by the use of DC Kerr effect. Although some theoretical and experimental studies have shown its existence in silicon, the DC Kerr effect in optical modulation have led to a negligible contribution so far. This paper reports demonstration of high-speed optical modulation based on the electric field-induced linear electro-optic effect in silicon PIN junction waveguides. The relative contributions of both plasma dispersion and Kerr effects are quantified and we show that the Kerr induced modulation is dominant when a high external DC electric field is applied. Finally, the high-speed modulation response is analyzed and eye diagram up to 100 Gbits/s in NRZ format are obtained. This work demonstrates high speed modulation based on Kerr effect in silicon, and its potential for low loss, quasi-pure phase modulation.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Dispersive wave control enabled by silicon metamaterial waveguides
Authors:
T. T. D. Dinh,
X. Le Roux,
M. Montesinos-Ballester,
C. Lafforgue,
J. Zhang,
D. González-Andrade,
D. Melati,
D. Bouville,
D. Benedikovic,
P. Cheben,
E. Cassan,
D. Marris-Morini,
L. Vivien,
C. Alonso-Ramos
Abstract:
The ability to exploit the on-chip nonlinear generation of new frequencies has opened the door to a plethora of applications in fundamental and applied physics. Excitation of dispersive waves is a particularly interesting process that allows efficient nonlinear wavelength conversion by phase-matching of a soliton and waves in the normal dispersion regime. However, controlling the wavelength of dis…
▽ More
The ability to exploit the on-chip nonlinear generation of new frequencies has opened the door to a plethora of applications in fundamental and applied physics. Excitation of dispersive waves is a particularly interesting process that allows efficient nonlinear wavelength conversion by phase-matching of a soliton and waves in the normal dispersion regime. However, controlling the wavelength of dispersive waves in integrated waveguides remains an open challenge, hampering versatile sha** of the nonlinear spectral response. Here, we show that metamaterial silicon waveguides release new degrees of freedom to select the wavelength of dispersive waves. Based on this concept, we experimentally demonstrate excitation of two dispersive waves near 1.55 μm and 7.5 μm allowing ultra-wideband supercontinuum generation, covering most of the silicon transparency window. These results stand as an important milestone for versatile nonlinear frequency generation in silicon chips, with a great potential for applications in sensing, metrology and communications.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Sha** the modal confinement in silicon nanophotonic waveguides through dual-metamaterial engineering
Authors:
T. T. D. Dinh,
X. Le Roux,
J. Zhang,
M. Montesinos-Ballester,
C. Lafforgue,
D. Benedikovic,
P. Cheben,
E. Cassan,
D. Marris-Morini,
L. Vivien,
C Alonso-Ramos
Abstract:
Flexible control of the modal confinement in silicon photonic waveguides is an appealing feature for many applications, including sensing and hybrid integration of active materials. In most cases, strip waveguides are the preferred solution to maximize the light interaction with the waveguide surroundings. However, the only two degrees of freedom in Si strip waveguides are the width and thickness,…
▽ More
Flexible control of the modal confinement in silicon photonic waveguides is an appealing feature for many applications, including sensing and hybrid integration of active materials. In most cases, strip waveguides are the preferred solution to maximize the light interaction with the waveguide surroundings. However, the only two degrees of freedom in Si strip waveguides are the width and thickness, resulting in limited flexibility in evanescent field control. Here, we propose and demonstrate a new strategy that exploits metamaterial engineering of the waveguide core and cladding to control the index contrast in the vertical and horizontal directions, independently. The proposed dual-material geometry yields a substantially increased calculated overlap with the air (0.35) compared to the best-case scenario for a strip waveguide (0.3). To experimentally demonstrate the potential of this approach, we have implemented dual-metamaterial ring resonators, operating with the transverse-magnetic polarized mode in 220-nm-thick waveguides with air as upper-cladding. Micro-ring resonators implemented with strip and dual-metamaterial waveguides exhibit the same measured quality factors, near 30,000. Having similar measured quality factors and better calculated external confinement factors than strip waveguides, the proposed dual-metamaterial geometry stands as a promising approach to control modal confinement in silicon waveguides.
△ Less
Submitted 31 May, 2021;
originally announced May 2021.
-
Stress measurements in silicon photonics by integrated Raman spectroscopy
Authors:
Guillaume Marcaud,
Mathias Berciano,
Christian Lafforgue,
Carlos Alonso-Ramos,
Xavier Le Roux,
Thomas Maroutian,
Guillaume Agnus,
Pascal Aubert,
Ludovic Largeau,
Eric Cassan,
Sylvia Matzen,
Delphine Marris-Morini,
Philippe Lecoeur,
Laurent Vivien
Abstract:
Complex 3D integration of photonic and electronic integrated circuits is of particular interest to carry the photonics roadmap and to address challenges but involves mechanical stress, often detrimental for the behavior of optical components. Existing experiments failed to carefully analyze the stress in such integrated optical devices due to the requirement in terms of feature sizes, few hundreds…
▽ More
Complex 3D integration of photonic and electronic integrated circuits is of particular interest to carry the photonics roadmap and to address challenges but involves mechanical stress, often detrimental for the behavior of optical components. Existing experiments failed to carefully analyze the stress in such integrated optical devices due to the requirement in terms of feature sizes, few hundreds of nanometers, and 3D-stacked integration. We present for the first time the characterization of the stress tensor of a silicon waveguide using Integrated Raman Spectroscopy (IRS). This experimental technique is directly sensitive to the effective stress, which involves changes in optical properties of the guided mode, at the working wavelength and polarization state of the photonic component. The experimental stress tensor is in good agreement with simulations.
△ Less
Submitted 24 December, 2020;
originally announced December 2020.
-
Inertial migration of bidisperse suspensions flowing in microchannels: effect of particle diameters ratio
Authors:
Tohme Tohme,
Yanfeng Gao,
Pascale Magaud,
Lucien Baldas,
Christine Lafforgue,
Stéphane Colin
Abstract:
Up to date, inertial migration of particles in microflows has demonstrated a great potential for a wide range of applications. In particular, this phenomenon is used to achieve particle separation or sorting in a suspension. Recent works reported that the focusing mode of particles can be modified in a polydisperse suspension. Nevertheless, the impact of the particle sizes in a mixture on their in…
▽ More
Up to date, inertial migration of particles in microflows has demonstrated a great potential for a wide range of applications. In particular, this phenomenon is used to achieve particle separation or sorting in a suspension. Recent works reported that the focusing mode of particles can be modified in a polydisperse suspension. Nevertheless, the impact of the particle sizes in a mixture on their inertial migration has been rarely studied up to now. Thus, we have investigated in this work the influence of bidispersity on the lateral migration of the particles towards equilibrium positions and on their longitudinal ordering into trains. Different changes in the particles behavior were observed when the ratio between the particle sizes (dp1/dp2) varied from 1.64 to 4.58.
△ Less
Submitted 7 June, 2019;
originally announced July 2019.
-
Inertial migration of neutrally buoyant particles in square channels at high Reynolds numbers
Authors:
Yichang Wang,
Yanfeng Gao,
Pascale Magaud,
Lucien Baldas,
Christine Lafforgue,
Stéphane Colin
Abstract:
KEY WORDS suspensions, inertial focusing, particle-laden flows, high Reynolds numbers SHORT SUMMARY The inertial migration of particles in square channel flows at the micro-scale has been deeply investigated in the last two decades. The well-known four equilibrium positions are located near the center of each channel face at moderate Reynolds numbers [1]. More recently, Miura et al. [2] revealed e…
▽ More
KEY WORDS suspensions, inertial focusing, particle-laden flows, high Reynolds numbers SHORT SUMMARY The inertial migration of particles in square channel flows at the micro-scale has been deeply investigated in the last two decades. The well-known four equilibrium positions are located near the center of each channel face at moderate Reynolds numbers [1]. More recently, Miura et al. [2] revealed experimentally the presence of eight equilibrium positions in millimetric square channels for Reynolds numbers higher than 250. The aim of the present work is to extend these results obtained at millimeter scale to the micrometer scale. To this end, in situ visualization of particles flowing in square micro-channels at Reynolds numbers ranging from 5 to 300 have been conducted and analyzed.
△ Less
Submitted 11 March, 2019;
originally announced March 2019.
-
Conditional stability of particle alignment in finite-Reynolds-number channel flow
Authors:
Anupam Gupta,
Pascale Magaud,
Christine Lafforgue,
Micheline Abbas
Abstract:
Finite-size neutrally buoyant particles in a channel flow are known to accumulate at specific equilibrium positions or spots in the channel cross-section if the flow inertia is finite at the particle scale. Experiments in different conduit geometries have shown that while reaching equilibrium locations, particles tend also to align regularly in the streamwise direction. In this paper, the Force Co…
▽ More
Finite-size neutrally buoyant particles in a channel flow are known to accumulate at specific equilibrium positions or spots in the channel cross-section if the flow inertia is finite at the particle scale. Experiments in different conduit geometries have shown that while reaching equilibrium locations, particles tend also to align regularly in the streamwise direction. In this paper, the Force Coupling Method was used to numerically investigate the inertia-induced particle alignment, using square channel geometry. The method was first shown to be suitable to capture the quasi-steady lift force that leads to particle cross-streamline migration in channel flow. Then the particle alignment in the flow direction was investigated by calculating the particle relative trajectories as a function of flow inertia and of the ratio between the particle size and channel hydraulic diameter. The flow streamlines were examined around the freely rotating particles at equilibrium, revealing stable small-scale vortices between aligned particles. The streamwise inter-particle spacing between aligned particles at equilibrium was calculated and compared to available experimental data in square channel flow (Gao {\it et al.} Microfluidics and Nanofluidics {\bf 21}, 154 (2017)). The new result highlighted by our numerical simulations is that the inter-particle spacing is unconditionally stable only for a limited number of aligned particles in a single train, the threshold number being dependent on the confinement (particle-to-channel size ratio) and on the Reynolds number. For instance, when the particle Reynolds number is $\approx1$ and the particle-to-channel height size ratio is $\approx0.1$, the maximum number of stable aligned particles per train is equal to 3. This agrees with statistics realized on the experiments of (Gao {\it et al.} Microfluidics and Nanofluidics {\bf 21}, 154 (2017)).
△ Less
Submitted 19 October, 2018;
originally announced October 2018.
-
Polarization and wavelength agnostic nanophotonic beam splitter
Authors:
David González-Andrade,
Christian Lafforgue,
Elena Durán-Valdeiglesias,
Xavier Le Roux,
Mathias Berciano,
Eric Cassan,
Delphine Marris-Morini,
Aitor V. Velasco,
Pavel Cheben,
Laurent Vivien,
Carlos Alonso-Ramos
Abstract:
High-performance optical beam splitters are of fundamental importance for the development of advanced silicon photonics integrated circuits. However, due to the high refractive index contrast of the silicon-on-insulator platform, state of the art Si splitters are hampered by trade-offs in bandwidth, polarization dependence and sensitivity to fabrication errors. Here, we present a new strategy that…
▽ More
High-performance optical beam splitters are of fundamental importance for the development of advanced silicon photonics integrated circuits. However, due to the high refractive index contrast of the silicon-on-insulator platform, state of the art Si splitters are hampered by trade-offs in bandwidth, polarization dependence and sensitivity to fabrication errors. Here, we present a new strategy that exploits modal engineering in slotted waveguides to overcome these limitations, enabling ultra-wideband polarization-insensitive optical power splitters, with relaxed fabrication tolerances. The proposed splitter relies on a single-mode slot waveguide which is transformed into two strip waveguides by a symmetric taper, yielding equal power splitting. Based on this concept, we experimentally demonstrate -3$\pm$0.5 dB polarization-independent transmission in an unprecedented 390 nm bandwidth (1260 - 1650 nm), even in the presence of waveguide width deviations as large as $\pm$25 nm.
△ Less
Submitted 25 June, 2018;
originally announced July 2018.
