-
Tapered multi-core fiber for lensless endoscopes
Authors:
Fatima El Moussawi,
Matthias Hofer,
Damien Labat,
Andy Cassez,
Géraud Bouwmans,
Siddharth Sivankutty,
Rosa Cossart,
Olivier Vanvincq,
Hervé Rigneault,
Esben Ravn Andresen
Abstract:
We present a novel fiber-optic component, a "tapered multi-core fiber (MCF)", designed for integration into ultra-miniaturized endoscopes for minimally invasive two-photon point-scanning imaging and to address the power delivery issue that has faced MCF based lensless endoscopes. With it we achieve experimentally a factor 6.0 increase in two-photon signal yield while kee** the ability to point-s…
▽ More
We present a novel fiber-optic component, a "tapered multi-core fiber (MCF)", designed for integration into ultra-miniaturized endoscopes for minimally invasive two-photon point-scanning imaging and to address the power delivery issue that has faced MCF based lensless endoscopes. With it we achieve experimentally a factor 6.0 increase in two-photon signal yield while kee** the ability to point-scan by the memory effect, and a factor 8.9 sacrificing the memory effect. To reach this optimal design we first develop and validate a fast numerical model capable of predicting the essential properties of an arbitrarily tapered MCF from its structural parameters. We then use this model to identify the tapered MCF design parameters that result in a chosen set of target properties (point-spread function, delivered power, presence or absence of memory effect). We fabricate the identified target designs by stack-and-draw and post-processing on a CO$_{2}$ laser-based glass processing and splicing system. Finally we demonstrate the performance gain of the fabricated tapered MCFs in two-photon imaging when used in a lensless endoscope system. Our results show that tailoring of the taper profile brings new degrees of freedom that can be efficiently exploited for lensless endoscopes.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
Simulating MADMAX in 3D: Requirements for Dielectric Axion Haloscopes
Authors:
S. Knirck,
J. Schütte-Engel,
S. Beurthey,
D. Breitmoser,
A. Caldwell,
C. Diaconu,
J. Diehl,
J. Egge,
M. Esposito,
A. Gardikiotis,
E. Garutti,
S. Heyminck,
F. Hubaut,
J. Jochum,
P. Karst,
M. Kramer,
C. Krieger,
D. Labat,
C. Lee,
X. Li,
A. Lindner,
B. Majorovits,
S. Martens,
M. Matysek,
E. Öz
, et al. (16 additional authors not shown)
Abstract:
We present 3D calculations for dielectric haloscopes such as the currently envisioned MADMAX experiment. For ideal systems with perfectly flat, parallel and isotropic dielectric disks of finite diameter, we find that a geometrical form factor reduces the emitted power by up to $30\,\%$ compared to earlier 1D calculations. We derive the emitted beam shape, which is important for antenna design. We…
▽ More
We present 3D calculations for dielectric haloscopes such as the currently envisioned MADMAX experiment. For ideal systems with perfectly flat, parallel and isotropic dielectric disks of finite diameter, we find that a geometrical form factor reduces the emitted power by up to $30\,\%$ compared to earlier 1D calculations. We derive the emitted beam shape, which is important for antenna design. We show that realistic dark matter axion velocities of $10^{-3} c$ and inhomogeneities of the external magnetic field at the scale of $10\,\%$ have negligible impact on the sensitivity of MADMAX. We investigate design requirements for which the emitted power changes by less than $20\,\%$ for a benchmark boost factor with a bandwidth of $50\,{\rm MHz}$ at $22\,{\rm GHz}$, corresponding to an axion mass of $90\,μ{\rm eV}$. We find that the maximum allowed disk tilt is $100\,μ{\rm m}$ divided by the disk diameter, the required disk planarity is $20\,μ{\rm m}$ (min-to-max) or better, and the maximum allowed surface roughness is $100\,μ{\rm m}$ (min-to-max). We show how using tiled dielectric disks glued together from multiple smaller patches can affect the beam shape and antenna coupling.
△ Less
Submitted 13 October, 2021; v1 submitted 13 April, 2021;
originally announced April 2021.
-
Variation of shear moduli across superconducting phase transitions
Authors:
Dimitri Labat,
Panagiotis Kotetes,
Brian M. Andersen,
Indranil Paul
Abstract:
We study how shear moduli of a correlated metal change across superconducting phase transitions. Using a microscopic theory we explain why for most classes of superconductors this change is small. The Fe-based and the A15 systems are notable exceptions where the change is boosted by five orders of magnitude. We show that this boost is a consequence of enhanced nematic correlation. The theory expla…
▽ More
We study how shear moduli of a correlated metal change across superconducting phase transitions. Using a microscopic theory we explain why for most classes of superconductors this change is small. The Fe-based and the A15 systems are notable exceptions where the change is boosted by five orders of magnitude. We show that this boost is a consequence of enhanced nematic correlation. The theory explains the unusual temperature dependence of the orthorhombic shear and the back-bending of the nematic transition line in the superconducting phase of the Fe-based systems.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
An open source massively parallel solver for Richards equation: Mechanistic modelling of water fluxes at the watershed scale
Authors:
L. Orgogozo,
N. Renon,
C. Soulaine,
F. Hénon,
S. K. Tomer,
D. Labat,
O. S. Pokrovsky,
M. Sekhar,
R. Ababou,
M. Quintard
Abstract:
In this paper we present a massively parallel open source solver for Richards equation, named the RichardsFOAM solver. This solver has been developed in the framework of the open source generalist computational fluid dynamics tool box OpenFOAM (R) and is capable to deal with large scale problems in both space and time. The source code for RichardsFOAM may be downloaded from the CPC program librar…
▽ More
In this paper we present a massively parallel open source solver for Richards equation, named the RichardsFOAM solver. This solver has been developed in the framework of the open source generalist computational fluid dynamics tool box OpenFOAM (R) and is capable to deal with large scale problems in both space and time. The source code for RichardsFOAM may be downloaded from the CPC program library website.It exhibits good parallel performances (up to $\sim$90% parallel efficiency with 1024 processors both in strong and weak scaling), and the conditions required for obtaining such performances are analysed and discussed. These performances enable the mechanistic modelling of water fluxes at the scale of experimental watersheds (up to few square kilometres of surface area), and on time scales of decades to a century. Such a solver can be useful in various applications, such as environmental engineering for long term transport of pollutants in soils, water engineering for assessing the impact of land settlement on water resources, or in the study of weathering processes on the watersheds.
△ Less
Submitted 28 September, 2018;
originally announced September 2018.
-
Pairing instability near a lattice-influenced nematic quantum critical point
Authors:
D. Labat,
I. Paul
Abstract:
We study how superconducting Tc is affected as an electronic system in a tetragonal environment is tuned to a nematic quantum critical point (QCP). Including coupling of the electronic nematic variable to the relevant lattice strain restricts criticality only to certain high symmetry directions. This allows a weak-coupling treatment, even at the QCP. We develop a criterion distinguishing weak and…
▽ More
We study how superconducting Tc is affected as an electronic system in a tetragonal environment is tuned to a nematic quantum critical point (QCP). Including coupling of the electronic nematic variable to the relevant lattice strain restricts criticality only to certain high symmetry directions. This allows a weak-coupling treatment, even at the QCP. We develop a criterion distinguishing weak and strong Tc enhancements upon approaching the QCP. We show that negligible Tc enhancement occurs only if pairing is dominated by a non-nematic interaction away from the QCP, and simultaneously if the electron-strain coupling is sufficiently strong. We argue this is the case of the iron superconductors.
△ Less
Submitted 14 December, 2017; v1 submitted 12 March, 2017;
originally announced March 2017.