-
Distributed MIMO Networks with Rotary ULAs for Indoor Scenarios under Rician Fading
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
The Fifth-Generation (5G) wireless communications networks introduced native support for Machine-Type Communications (MTC) use cases. Nevertheless, current 5G networks cannot fully meet the very stringent requirements regarding latency, reliability, and number of connected devices of most MTC use cases. Industry and academia have been working on the evolution from 5G to Sixth Generation (6G) netwo…
▽ More
The Fifth-Generation (5G) wireless communications networks introduced native support for Machine-Type Communications (MTC) use cases. Nevertheless, current 5G networks cannot fully meet the very stringent requirements regarding latency, reliability, and number of connected devices of most MTC use cases. Industry and academia have been working on the evolution from 5G to Sixth Generation (6G) networks. One of the main novelties is adopting Distributed Multiple-Input Multiple-Output (D-MIMO) networks. However, most works studying D-MIMO consider antenna arrays with no movement capabilities, even though some recent works have shown that this could bring substantial performance improvements. In this work, we propose the utilization of Access Points (APs) equipped with Rotary Uniform Linear Arrays (RULAs) for this purpose. Considering a spatially correlated Rician fading model, the optimal angular position of the RULAs is jointly computed by the central processing unit using particle swarm optimization as a function of the position of the active devices. Considering the impact of imperfect positioning estimates, our numerical results show that the RULAs's optimal rotation brings substantial performance gains in terms of mean per-user spectral efficiency. The improvement grows with the strength of the line-of-sight components of the channel vectors. Given the total number of antenna elements, we study the trade-off between the number of APs and the number of antenna elements per AP, revealing an optimal number of APs for the cases of APs equipped with static ULAs and RULAs.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Goal-Oriented Sensor Reporting Scheduling for Non-linear Dynamic System Monitoring
Authors:
Prasoon Raghuwanshi,
Onel Luis Alcaraz López,
Vimal Bhatia,
Matti Latva-aho
Abstract:
Goal-oriented communication (GoC) is a form of semantic communication where the effectiveness of information transmission is measured by its impact on achieving the desired goal. In the context of the Internet of Things (IoT), GoC can make IoT sensors to selectively transmit data pertinent to the intended goals of the receiver. Therefore, GoC holds significant value for IoT networks as it facilita…
▽ More
Goal-oriented communication (GoC) is a form of semantic communication where the effectiveness of information transmission is measured by its impact on achieving the desired goal. In the context of the Internet of Things (IoT), GoC can make IoT sensors to selectively transmit data pertinent to the intended goals of the receiver. Therefore, GoC holds significant value for IoT networks as it facilitates timely decision-making at the receiver, reduces network congestion, and enhances spectral efficiency. In this paper, we consider a scenario where an edge node polls sensors monitoring the state of a non-linear dynamic system (NLDS) to respond to the queries of several clients. Our work delves into the foregoing GoC problem, which we term goal-oriented scheduling (GoS). Our proposed GoS utilizes deep reinforcement learning (DRL) with meticulously devised action space, state space, and reward function. The devised action space and reward function play a pivotal role in reducing the number of sensor transmissions. Meanwhile, the devised state space empowers our DRL scheduler to poll the sensor whose observation is expected to minimize the mean square error (MSE) of the query responses. Our numerical analysis demonstrates that the proposed GoS can either effectively minimize the query response MSE further or obtain a resembling MSE compared to benchmark scheduling methods, depending on the type of query. Furthermore, the proposed GoS proves to be energy-efficient for the sensors and of lower complexity compared to benchmark scheduling methods.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Intelligent Duty Cycling Management and Wake-up for Energy Harvesting IoT Networks with Correlated Activity
Authors:
David E. Ruíz-Guirola,
Onel L. A. López,
Samuel Montejo-Sánchez,
Israel Leyva Mayorga,
Zhu Han,
Petar Popovski
Abstract:
This paper presents an approach for energy-neutral Internet of Things (IoT) scenarios where the IoT devices (IoTDs) rely entirely on their energy harvesting capabilities to sustain operation. We use a Markov chain to represent the operation and transmission states of the IoTDs, a modulated Poisson process to model their energy harvesting process, and a discrete-time Markov chain to model their bat…
▽ More
This paper presents an approach for energy-neutral Internet of Things (IoT) scenarios where the IoT devices (IoTDs) rely entirely on their energy harvesting capabilities to sustain operation. We use a Markov chain to represent the operation and transmission states of the IoTDs, a modulated Poisson process to model their energy harvesting process, and a discrete-time Markov chain to model their battery state. The aim is to efficiently manage the duty cycling of the IoTDs, so as to prolong their battery life and reduce instances of low-energy availability. We propose a duty-cycling management based on K- nearest neighbors, aiming to strike a trade-off between energy efficiency and detection accuracy. This is done by incorporating spatial and temporal correlations among IoTDs' activity, as well as their energy harvesting capabilities. We also allow the base station to wake up specific IoTDs if more information about an event is needed upon initial detection. Our proposed scheme shows significant improvements in energy savings and performance, with up to 11 times lower misdetection probability and 50\% lower energy consumption for high-density scenarios compared to a random duty cycling benchmark.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
End-to-End Waveform and Beamforming Optimization for RF Wireless Power Transfer
Authors:
Abdul Basit Khattak,
Onel L. A. López,
Amirhossein Azarbahram,
Deepak Kumar,
Matti Latva-aho
Abstract:
Radio frequency (RF) wireless power transfer (WPT) is a key technology for future low-power wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is challenging for practical applications. The main factors contributing to it are the channel losses, transceivers' power consumption, and losses related, e.g., to the digital-to-analog converter (DAC), high-power ampl…
▽ More
Radio frequency (RF) wireless power transfer (WPT) is a key technology for future low-power wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is challenging for practical applications. The main factors contributing to it are the channel losses, transceivers' power consumption, and losses related, e.g., to the digital-to-analog converter (DAC), high-power amplifier, and rectenna. Optimizing PTE requires careful consideration of these factors, motivating the current work. Herein, we consider an analog multi-antenna power transmitter that aims to charge a single energy harvester. We first provide a mathematical framework to calculate the harvested power from multi-tone signal transmissions and the system power consumption. Then, we formulate the joint waveform and analog beamforming design problem to minimize power consumption and meet the charging requirements. Finally, we propose an optimization approach relying on swarm intelligence to solve the specified problem. Simulation results quantify the power consumption reduction as the DAC, phase shifters resolution, and antenna length are increased, while it is seen that increasing system frequency results in higher power consumption.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Deep Reinforcement Learning for Multi-User RF Charging with Non-linear Energy Harvesters
Authors:
Amirhossein Azarbahram,
Onel L. A. López,
Petar Popovski,
Shashi Raj Pandey,
Matti Latva-aho
Abstract:
Radio frequency (RF) wireless power transfer (WPT) is a promising technology for sustainable support of massive Internet of Things (IoT). However, RF-WPT systems are characterized by low efficiency due to channel attenuation, which can be mitigated by precoders that adjust the transmission directivity. This work considers a multi-antenna RF-WPT system with multiple non-linear energy harvesting (EH…
▽ More
Radio frequency (RF) wireless power transfer (WPT) is a promising technology for sustainable support of massive Internet of Things (IoT). However, RF-WPT systems are characterized by low efficiency due to channel attenuation, which can be mitigated by precoders that adjust the transmission directivity. This work considers a multi-antenna RF-WPT system with multiple non-linear energy harvesting (EH) nodes with energy demands changing over discrete time slots. This leads to the charging scheduling problem, which involves choosing the precoders at each slot to minimize the total energy consumption and meet the EH requirements. We model the problem as a Markov decision process and propose a solution relying on a low-complexity beamforming and deep deterministic policy gradient (DDPG). The results show that the proposed beamforming achieves near-optimal performance with low computational complexity, and the DDPG-based approach converges with the number of episodes and reduces the system's power consumption, while the outage probability and the power consumption increase with the number of devices.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Cell Balancing for the Transportation Sector: Techniques, Challenges, and Future Research Directions
Authors:
Anupama R Itagi,
Rakhee Kallimani,
Krishna Pai,
Sridhar Iyer,
Onel L. A. Lopez
Abstract:
Efficient and reliable energy systems are key to progress of society. High performance batteries are essential for widely used technologies like Electric Vehicles (EVs) and portable electronics. Additionally, an effective Battery Management System (BMS) is crucial to oversee vital parameters of battery. However, BMS can experience cell imbalance due to charging/discharging dynamics, which reduce b…
▽ More
Efficient and reliable energy systems are key to progress of society. High performance batteries are essential for widely used technologies like Electric Vehicles (EVs) and portable electronics. Additionally, an effective Battery Management System (BMS) is crucial to oversee vital parameters of battery. However, BMS can experience cell imbalance due to charging/discharging dynamics, which reduce battery capacity, lifespan, and efficiency, and raise critical safety concerns. This calls for effective cell-balancing techniques. Notably, the existing literature on cell balancing is limited, urgently necessitating a thorough survey to pinpoint key research gaps and suggest prompt solutions. In this article, cell balancing and corresponding techniques are reviewed. Initially, we detail comparison of passive cell balancing techniques and assess their respective advantages, drawbacks, and practical applications. Then, we discuss the strengths and weaknesses of active cell balancing methods and applicability of cell balancing for both, series and parallel-connected cells. Additionally, we examine the need for cell balancing in commonly used batteries, and applications in EVs. Lastly, we present detailed prospects which include challenges and directions for future research.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
EVT-enriched Radio Maps for URLLC
Authors:
Dian Echevarría Pérez,
Onel L. Alcaraz López,
Hirley Alves
Abstract:
This paper introduces a sophisticated and adaptable framework combining extreme value theory with radio maps to spatially model extreme channel conditions accurately. Utilising existing signal-to-noise ratio (SNR) measurements and leveraging Gaussian processes, our approach predicts the tail of the SNR distribution, which entails estimating the parameters of a generalised Pareto distribution, at u…
▽ More
This paper introduces a sophisticated and adaptable framework combining extreme value theory with radio maps to spatially model extreme channel conditions accurately. Utilising existing signal-to-noise ratio (SNR) measurements and leveraging Gaussian processes, our approach predicts the tail of the SNR distribution, which entails estimating the parameters of a generalised Pareto distribution, at unobserved locations. This innovative method offers a versatile solution adaptable to various resource allocation challenges in ultra-reliable low-latency communications. We evaluate the performance of this method in a rate maximisation problem with defined outage constraints and compare it with a benchmark in the literature. Notably, the proposed approach meets the outage demands in a larger percentage of the coverage area and reaches higher transmission rates.
△ Less
Submitted 6 April, 2024;
originally announced April 2024.
-
Assessment of the Sparsity-Diversity Trade-offs in Active Users Detection for mMTC
Authors:
Gabriel Martins de Jesus,
Onel Luis Alcaraz Lopez,
Richard Demo Souza,
Nurul Huda Mahmood,
Markku Juntti,
Matti Latva-Aho
Abstract:
Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsi…
▽ More
Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsity in the AUD problem. Single-antenna users transmit multiple copies of non-orthogonal pilots across multiple frequency channels and the base station independently performs AUD in each channel using the orthogonal matching pursuit algorithm. We note that, although frequency diversity may improve the likelihood of successful reception of the signals, it may also damage the channel sparsity level, leading to important trade-offs. We show that a sparser signal significantly benefits AUD, surpassing the advantages brought by frequency diversity in scenarios with limited temporal resources and/or high numbers of receive antennas. Conversely, with longer pilots and fewer receive antennas, investing in frequency diversity becomes more impactful, resulting in a tenfold AUD performance improvement.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
On the Spectral Efficiency of Indoor Wireless Networks with a Rotary Uniform Linear Array
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained…
▽ More
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained traction among the research community. By moving in a confined region, movable antennas are able to exploit the wireless channel variation in the continuous domain. This additional degree of freedom may enhance the quality of the wireless links, and consequently the communication performance. However, movable antennas for MU-MIMO proposed in the literature are complex, bulky, expensive and present a high power consumption. In this paper, we propose an alternative to such systems that has lower complexity and lower cost. More specifically, we propose the incorporation of rotation capabilities to APs equipped with Uniform Linear Arrays (ULAs) of antennas. We consider the uplink of an indoor scenario where the AP serves multiple devices simultaneously. The optimal rotation of the ULA is computed based on estimates of the positions of the active devices and aiming at maximizing the per-user mean achievable Spectral Efficiency (SE). Adopting a spatially correlated Rician channel model, our numerical results show that the rotation capabilities of the AP can bring substantial improvements in the SE in scenarios where the line-of-sight component of the channel vectors is strong. Moreover, our proposed system is robust against imperfect positioning estimates.
△ Less
Submitted 25 June, 2024; v1 submitted 8 February, 2024;
originally announced February 2024.
-
Channel Scheduling for IoT Access with Spatial Correlation
Authors:
Prasoon Raghuwanshi,
Onel Luis Alcaraz López,
Petar Popovski,
Matti Latva-aho
Abstract:
Spatially correlated device activation is a typical feature of the Internet of Things (IoT). This motivates the development of channel scheduling (CS) methods that mitigate device collisions efficiently in such scenarios, which constitutes the scope of this work. Specifically, we present a quadratic program (QP) formulation for the CS problem considering the joint activation probabilities among de…
▽ More
Spatially correlated device activation is a typical feature of the Internet of Things (IoT). This motivates the development of channel scheduling (CS) methods that mitigate device collisions efficiently in such scenarios, which constitutes the scope of this work. Specifically, we present a quadratic program (QP) formulation for the CS problem considering the joint activation probabilities among devices. This formulation allows the devices to stochastically select the transmit channels, thus, leading to a soft-clustering approach. We prove that the optimal QP solution can only be attained when it is transformed into a hard-clustering problem, leading to a pure integer QP, which we transform into a pure integer linear program (PILP). We leverage the branch-and-cut (B&C) algorithm to solve PILP optimally. Due to the high computational cost of B&C, we resort to some sub-optimal clustering methods with low computational costs to tackle the clustering problem in CS. Our findings demonstrate that the CS strategy, sourced from B&C, significantly outperforms those derived from sub-optimal clustering methods, even amidst increased device correlation.
△ Less
Submitted 17 November, 2023;
originally announced December 2023.
-
High-Power and Safe RF Wireless Charging: Cautious Deployment and Operation
Authors:
Onel L. A. López,
Osmel M. Rosabal,
Amirhossein Azarbahram,
A. Basit Khattak,
Mehdi Monemi,
Richard D. Souza,
Petar Popovski,
Matti Latva-aho
Abstract:
The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT…
▽ More
The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT implementation and operation require efficient and cautious strategies and protocols, especially when targeting high-power charging, which constitutes the scope of this work. Herein, we overview the main factors affecting the end-to-end PTE of RF-WPT systems and their multiplicative effect and interdependencies. Moreover, we discuss key electromagnetic field (EMF) exposure metrics, safety limits, and approaches for efficient and EMF-aware deployment and operation. Quantitatively, we show that near-field RF charging may significantly reduce EMF exposure, and thus must be promoted. We also present our vision of a cyber-physical system for efficient and safe wireless charging, specify key components and their interrelation, and illustrate numerically the PTE attained by two modern low-power multi-antenna architectures in a simple setup. Throughout the paper, we highlight the need for high end-to-end PTE architectures and charging protocols transparently complying with EMF exposure regulations and outline relevant challenges and research directions. This work expands the vision and understanding of modern RF-WPT technology and constitutes a step towards making the technology attractive for worldwide commercial exploitation.
△ Less
Submitted 20 September, 2023;
originally announced November 2023.
-
Energy-Efficient Analog Beamforming for RF-WET with Charging Time Constraint
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves
Abstract:
Internet of Things (IoT) sustainability may hinge on radio frequency wireless energy transfer (RF-WET). However, energy-efficient charging strategies are still needed, motivating our work. Specifically, this letter proposes a time division scheme to efficiently charge low-power devices in an IoT network. For this, a multi-antenna power beacon (PB) drives the devices' energy harvesting circuit to t…
▽ More
Internet of Things (IoT) sustainability may hinge on radio frequency wireless energy transfer (RF-WET). However, energy-efficient charging strategies are still needed, motivating our work. Specifically, this letter proposes a time division scheme to efficiently charge low-power devices in an IoT network. For this, a multi-antenna power beacon (PB) drives the devices' energy harvesting circuit to the highest power conversion efficiency point via energy beamforming, thus achieving minimum energy consumption. Herein, we adopt the analog multi-antenna architecture due to its low complexity, cost, and energy consumption. The proposal includes a simple yet accurate model for the transfer characteristic of the energy harvesting circuit, enabling the optimization framework. The results evince the effectiveness of our RF-WET strategy over a benchmark scheme where the PB charges all the IoT devices simultaneously. Furthermore, the performance increases with the number of PB antennas.
△ Less
Submitted 20 March, 2024; v1 submitted 9 November, 2023;
originally announced November 2023.
-
On the Radio Stripe Deployment for Indoor RF Wireless Power Transfer
Authors:
Amirhossein Azarbahram,
Onel L. A. Lopez,
Petar Popovski,
Matti Latva-aho
Abstract:
One of the primary goals of future wireless systems is to foster sustainability, for which, radio frequency (RF) wireless power transfer (WPT) is considered a key technology enabler. The key challenge of RF-WPT systems is the extremely low end-to-end efficiency, mainly due to the losses introduced by the wireless channel. Distributed antenna systems are undoubtedly appealing as they can significan…
▽ More
One of the primary goals of future wireless systems is to foster sustainability, for which, radio frequency (RF) wireless power transfer (WPT) is considered a key technology enabler. The key challenge of RF-WPT systems is the extremely low end-to-end efficiency, mainly due to the losses introduced by the wireless channel. Distributed antenna systems are undoubtedly appealing as they can significantly shorten the charging distances, thus, reducing channel losses. Interestingly, radio stripe systems provide a cost-efficient and scalable way to deploy a distributed multi-antenna system, and thus have received a lot of attention recently. Herein, we consider an RF-WPT system with a transmit radio stripe network to charge multiple indoor energy hotspots, i.e., spatial regions where the energy harvesting devices are expected to be located, including near-field locations. We formulate the optimal radio stripe deployment problem aimed to maximize the minimum power received by the users and explore two specific predefined shapes, namely the straight line and polygon-shaped configurations. Then, we provide efficient solutions relying on geometric programming to optimize the location of the radio stripe elements. The results demonstrate that the proposed radio stripe deployments outperform a central fully-digital square array with the same number of elements and utilizing larger radio stripe lengths can enhance the performance, while increasing the system frequency may degrade it.
△ Less
Submitted 14 October, 2023;
originally announced October 2023.
-
Energy-Aware Federated Learning with Distributed User Sampling and Multichannel ALOHA
Authors:
Rafael Valente da Silva,
Onel L. Alcaraz López,
Richard Demo Souza
Abstract:
Distributed learning on edge devices has attracted increased attention with the advent of federated learning (FL). Notably, edge devices often have limited battery and heterogeneous energy availability, while multiple rounds are required in FL for convergence, intensifying the need for energy efficiency. Energy depletion may hinder the training process and the efficient utilization of the trained…
▽ More
Distributed learning on edge devices has attracted increased attention with the advent of federated learning (FL). Notably, edge devices often have limited battery and heterogeneous energy availability, while multiple rounds are required in FL for convergence, intensifying the need for energy efficiency. Energy depletion may hinder the training process and the efficient utilization of the trained model. To solve these problems, this letter considers the integration of energy harvesting (EH) devices into a FL network with multi-channel ALOHA, while proposing a method to ensure both low energy outage probability and successful execution of future tasks. Numerical results demonstrate the effectiveness of this method, particularly in critical setups where the average energy income fails to cover the iteration cost. The method outperforms a norm based solution in terms of convergence time and battery level.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Extreme Value Theory-based Robust Minimum-Power Precoding for URLLC
Authors:
Dian Echevarría Pérez,
Onel L. Alcaraz López,
Hirley Alves
Abstract:
Channel state information (CSI) is crucial for achieving ultra-reliable low-latency communication (URLLC) in wireless networks. The main associated problems are the CSI acquisition time, which impacts the delay requirements of time-critical applications, and the estimation accuracy, which degrades the signal-to-interference-plus-noise ratio (SINR), thus, reducing reliability. In this work, we form…
▽ More
Channel state information (CSI) is crucial for achieving ultra-reliable low-latency communication (URLLC) in wireless networks. The main associated problems are the CSI acquisition time, which impacts the delay requirements of time-critical applications, and the estimation accuracy, which degrades the signal-to-interference-plus-noise ratio (SINR), thus, reducing reliability. In this work, we formulate and solve a minimum-power precoding design problem simultaneously serving multiple URLLC users in the downlink with imperfect CSI availability. Specifically, we develop an algorithm that exploits state-of-the-art precoding schemes such as the maximal ratio transmission (MRT) and zero-forcing (ZF), and adjust the power of the precoders to compensate for the channel estimation error uncertainty based on the extreme value theory (EVT) framework. Finally, we evaluate the performance of our method and show its superiority concerning worst-case robust precoding, which is used as a benchmark.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Energy Beamforming for RF Wireless Power Transfer with Dynamic Metasurface Antennas
Authors:
Amirhossein Azarbahram,
Onel L. A. Lopez,
Richard D. Souza,
Rui Zhang,
Matti Latva-Aho
Abstract:
Radio frequency (RF) wireless power transfer (WPT) is a promising technology for charging the Internet of Things. Practical RF-WPT systems usually require energy beamforming (EB), which can compensate for the severe propagation loss by directing beams toward the devices. The EB flexibility depends on the transmitter architecture, existing a trade-off between cost/complexity and degrees of freedom.…
▽ More
Radio frequency (RF) wireless power transfer (WPT) is a promising technology for charging the Internet of Things. Practical RF-WPT systems usually require energy beamforming (EB), which can compensate for the severe propagation loss by directing beams toward the devices. The EB flexibility depends on the transmitter architecture, existing a trade-off between cost/complexity and degrees of freedom. Thus, simpler architectures such as dynamic metasurface antennas (DMAs) are gaining attention. Herein, we consider an RF-WPT system with a transmit DMA for meeting the energy harvesting requirements of multiple devices and formulate an optimization problem for the minimum-power design. First, we provide a mathematical model to capture the frequency-dependant signal propagation effect in the DMA architecture. Next, we propose a solution based on semi-definite programming and alternating optimization. Results show that a DMA-based structure can outperform a fully-digital implementation and that the required transmit power decreases with the antenna array size, while it increases and remains almost constant with frequency in DMA and FD, respectively.
△ Less
Submitted 13 December, 2023; v1 submitted 3 July, 2023;
originally announced July 2023.
-
Waveform Optimization and Beam Focusing for Near-field Wireless Power Transfer with Dynamic Metasurface Antennas and Non-linear Energy Harvesters
Authors:
Amirhossein Azarbahram,
Onel L. A. López,
Matti Latva-Aho
Abstract:
Radio frequency (RF) wireless power transfer (WPT) is a promising technology for future wireless systems. However, the low power transfer efficiency (PTE) is a critical challenge for practical implementations. One of the main inefficiency sources is the power consumption and loss introduced by key components such as high-power amplifier (HPA) and rectenna, thus they must be carefully considered fo…
▽ More
Radio frequency (RF) wireless power transfer (WPT) is a promising technology for future wireless systems. However, the low power transfer efficiency (PTE) is a critical challenge for practical implementations. One of the main inefficiency sources is the power consumption and loss introduced by key components such as high-power amplifier (HPA) and rectenna, thus they must be carefully considered for PTE optimization. Herein, we consider a near-field RF-WPT system with the emerging dynamic metasurface antenna (DMA) at the transmitter and non-linear energy harvesters. We provide a mathematical framework to calculate the power consumption and harvested power from multi-tone signal transmissions. Then, we propose an approach relying on alternating optimization and successive convex approximation for waveform optimization and beam focusing to minimize power consumption while meeting energy harvesting requirements. Numerical results show that increasing the transmit tones reduces the power consumption by leveraging the rectifier's non-linearity. Moreover, it is demonstrated that increasing the antenna length improves the performance, while both DMA and fully-digital architectures may be favorable depending on the setup. Finally, our results verify that the transmitter generates accurate energy beams pointed to devices located in the near-field, while energy beams are formed in devices' direction in the far-field region.
△ Less
Submitted 1 March, 2024; v1 submitted 3 July, 2023;
originally announced July 2023.
-
Sustainable RF Wireless Energy Transfer for Massive IoT: enablers and challenges
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves,
Matti Latva-aho
Abstract:
Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which c…
▽ More
Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which can unlock a myriad of new use cases. In this context, sustainable radio frequency wireless energy transfer emerges as an attractive solution for efficiently charging the next generation of ultra low power IoT devices. Herein, we highlight that sustainable charging is broader than conventional green charging, as it focuses on balancing economy prosperity and social equity in addition to environmental health. We discuss the economic implications of powering energy transmitters with ambient energy sources, and reveal insights on their optimal deployment. Moreover, we overview different methods for modeling the energy arrival process of ambient energy sources and discuss their application in different use cases. We highlight the potential of integrating sustainable WET with energy harvesting from nearby transmitters and discuss enhancements in energy receiver design. We also illustrate the role of different technologies in enabling sustainable WET and exemplify various use cases. Besides, we reveal insights into low-complexity architectures designed at the energy transmitters. We highlight relevant research challenges and candidate solutions.
△ Less
Submitted 9 November, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
On CSI-Free Multi-Antenna Schemes for Massive Wireless-Powered Underground Sensor Networks
Authors:
Kaiqiang Lin,
Onel Luis Alcaraz López,
Hirley Alves,
Tong Hao
Abstract:
Radio-frequency wireless energy transfer (WET) is a promising technology to realize wireless-powered underground sensor networks (WPUSNs) and enable sustainable underground monitoring. However, due to the severe attenuation in harsh underground soil and the tight energy budget of the underground sensors, traditional WPUSNs relying on the channel state information (CSI) are highly inefficient, espe…
▽ More
Radio-frequency wireless energy transfer (WET) is a promising technology to realize wireless-powered underground sensor networks (WPUSNs) and enable sustainable underground monitoring. However, due to the severe attenuation in harsh underground soil and the tight energy budget of the underground sensors, traditional WPUSNs relying on the channel state information (CSI) are highly inefficient, especially in massive WET scenarios. To address this challenge, we comparatively assess the feasibility of several state-of-the-art CSI-free multi-antenna WET schemes for WPUSNs, under a given power budget. Moreover, to overcome the extremely low WET efficiency in underground channels, we propose a distributed CSI-free system, where multiple power beacons (PBs) simultaneously charge a large set of underground sensors without any CSI. We consider the position-aware K-Means and the position-agnostic equally-far-from-center (EFFC) approaches for the optimal deployment of the PBs. Our results evince that the performance of the proposed distributed CSI-free system can approach or even surpass that of a traditional full-CSI WET strategy, especially when adopting an appropriate CSI-free scheme, applying the advisable PBs deployment approach, and equip** the PBs with an appropriate number of antennas. Finally, we discuss the impact of underground parameters, i.e., the burial depth of devices and the volumetric water content of soil, on the system's performance, and identify potential challenges and research opportunities for practical distributed CSI-free WPUSNs deployment.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Joint Activity Detection and Channel Estimation for Clustered Massive Machine Type Communications
Authors:
Leatile Marata,
Onel Luis Alcaraz López,
Andreas Hauptmann,
Hamza Djelouat,
Hirley Alves
Abstract:
Compressed sensing multi-user detection (CS-MUD) algorithms play a key role in optimizing grant-free (GF) non-orthogonal multiple access (NOMA) for massive machine-type communications (mMTC). However, current CS-MUD algorithms cannot be efficiently parallelized, leading to computationally expensive implementations of joint activity detection and channel estimation (JADCE) as the number of deployed…
▽ More
Compressed sensing multi-user detection (CS-MUD) algorithms play a key role in optimizing grant-free (GF) non-orthogonal multiple access (NOMA) for massive machine-type communications (mMTC). However, current CS-MUD algorithms cannot be efficiently parallelized, leading to computationally expensive implementations of joint activity detection and channel estimation (JADCE) as the number of deployed machine-type devices (MTDs) increases. To address this, the present work proposes novel JADCE algorithms that can be applied in parallel for different clusters of MTDs by exploiting the structure of the pilot sequences. These are the approximation error method (AEM)-alternating direction method of multipliers (ADMM), and AEM-sparse Bayesian learning (SBL). Results presented in terms of the normalized mean square error and the probability of miss detection show comparable performance to the conventional algorithms. However, both AEM-ADMM and AEM-SBL algorithms have significantly reduced computational complexity and run times, thus, facilitating network scalability.
△ Less
Submitted 3 October, 2023; v1 submitted 4 May, 2023;
originally announced May 2023.
-
Age-of-Information Dependent Random Access in NOMA-Aided Multiple-Relay Slotted ALOHA
Authors:
Gabriel Germino Martins de Jesus,
João Luiz Rebelatto,
Richard Demo Souza,
Onel Luis Alcaraz López
Abstract:
We propose and evaluate the performance of a Non-Orthogonal Multiple Access (NOMA) dual-hop multiple relay (MR) network from an information freshness perspective using the Age of Information (AoI) metric. More specifically, we consider an age dependent (AD) policy, named as AD-NOMA- MR, in which users only transmit, with a given probability, after they reach a certain age threshold. The packets se…
▽ More
We propose and evaluate the performance of a Non-Orthogonal Multiple Access (NOMA) dual-hop multiple relay (MR) network from an information freshness perspective using the Age of Information (AoI) metric. More specifically, we consider an age dependent (AD) policy, named as AD-NOMA- MR, in which users only transmit, with a given probability, after they reach a certain age threshold. The packets sent by the users are potentially received by the relays, and then forwarded to a common sink in a NOMA fashion by randomly selecting one of the available power levels, and multiple packets are received if all selected levels are unique. We derive analytical expressions for the average AoI of AD-NOMA-MR. Through numerical and simulation results, we show that the proposed policy can improve the average AoI up to 76.6% when compared to a previously proposed AD Orthogonal Multiple Access MR policy.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Performance Analysis of Centralized and Distributed Massive MIMO for MTC
Authors:
Eduardo Noboro Tominaga,
Onel Luiz Alcaraz López,
Hirley Alves,
Richard Demo Souza,
Leonardo Terças
Abstract:
Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and ac…
▽ More
Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and academia are working on the evolution from conventional Centralized mMIMO (CmMIMO) to Distributed mMIMO (DmMIMO) architectures for the Sixth Generation (6G) of wireless networks. Under this new paradigm, several Access Points (APs) are distributed in the coverage area, and all jointly cooperate to serve the active devices. Aiming at Machine-Type Communication (MTC) use cases, we compare the performance of CmMIMO and different DmMIMO deployments in an indoor industrial scenario considering regular and alarm traffic patterns for MTC. Our simulation results show that DmMIMO's performance is often superior to CmMIMO. However, the traditional CmMIMO can outperform DmMIMO when the devices' channels are highly correlated.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Performance Analysis of ML-based MTC Traffic Pattern Predictors
Authors:
David E. Ruiz-Guirola,
Onel L. A. Lopez,
Samuel Montejo-Sanchez,
Richard Demo Souza,
Mehdi Bennis
Abstract:
Prolonging the lifetime of massive machine-type communication (MTC) networks is key to realizing a sustainable digitized society. Great energy savings can be achieved by accurately predicting MTC traffic followed by properly designed resource allocation mechanisms. However, selecting the proper MTC traffic predictor is not straightforward and depends on accuracy/complexity trade-offs and the speci…
▽ More
Prolonging the lifetime of massive machine-type communication (MTC) networks is key to realizing a sustainable digitized society. Great energy savings can be achieved by accurately predicting MTC traffic followed by properly designed resource allocation mechanisms. However, selecting the proper MTC traffic predictor is not straightforward and depends on accuracy/complexity trade-offs and the specific MTC applications and network characteristics. Remarkably, the related state-of-the-art literature still lacks such debates. Herein, we assess the performance of several machine learning (ML) methods to predict Poisson and quasi-periodic MTC traffic in terms of accuracy and computational cost. Results show that the temporal convolutional network (TCN) outperforms the long-short term memory (LSTM), the gated recurrent units (GRU), and the recurrent neural network (RNN), in that order. For Poisson traffic, the accuracy gap between the predictors is larger than under quasi-periodic traffic. Finally, we show that running a TCN predictor is around three times more costly than other methods, while the training/inference time is the greatest/least.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
TinyML: Tools, Applications, Challenges, and Future Research Directions
Authors:
Rakhee Kallimani,
Krishna Pai,
Prasoon Raghuwanshi,
Sridhar Iyer,
Onel L. A. López
Abstract:
In recent years, Artificial Intelligence (AI) and Machine learning (ML) have gained significant interest from both, industry and academia. Notably, conventional ML techniques require enormous amounts of power to meet the desired accuracy, which has limited their use mainly to high-capability devices such as network nodes. However, with many advancements in technologies such as the Internet of Thin…
▽ More
In recent years, Artificial Intelligence (AI) and Machine learning (ML) have gained significant interest from both, industry and academia. Notably, conventional ML techniques require enormous amounts of power to meet the desired accuracy, which has limited their use mainly to high-capability devices such as network nodes. However, with many advancements in technologies such as the Internet of Things (IoT) and edge computing, it is desirable to incorporate ML techniques into resource-constrained embedded devices for distributed and ubiquitous intelligence. This has motivated the emergence of the TinyML paradigm which is an embedded ML technique that enables ML applications on multiple cheap, resource- and power-constrained devices. However, during this transition towards appropriate implementation of the TinyML technology, multiple challenges such as processing capacity optimization, improved reliability, and maintenance of learning models' accuracy require timely solutions. In this article, various avenues available for TinyML implementation are reviewed. Firstly, a background of TinyML is provided, followed by detailed discussions on various tools supporting TinyML. Then, state-of-art applications of TinyML using advanced technologies are detailed. Lastly, various research challenges and future directions are identified.
△ Less
Submitted 23 March, 2023;
originally announced March 2023.
-
Fitting the Distribution of Linear Combinations of t-Variables with more than 2 Degrees of Freedom
Authors:
Onel L. Alcaraz López,
Evelio M. G. Fernández,
Matti Latva-aho
Abstract:
The linear combination of Student's $t$ random variables (RVs) appears in many statistical applications. Unfortunately, the Student's $t$ distribution is not closed under convolution, thus, deriving an exact and general distribution for the linear combination of $K$ Student's $t$ RVs is infeasible, which motivates a fitting/approximation approach. Here, we focus on the scenario where the only cons…
▽ More
The linear combination of Student's $t$ random variables (RVs) appears in many statistical applications. Unfortunately, the Student's $t$ distribution is not closed under convolution, thus, deriving an exact and general distribution for the linear combination of $K$ Student's $t$ RVs is infeasible, which motivates a fitting/approximation approach. Here, we focus on the scenario where the only constraint is that the number of degrees of freedom of each $t-$RV is greater than two. Notice that since the odd moments/cumulants of the Student's $t$ distribution are zero, and the even moments/cumulants do not exist when their order is greater than the number of degrees of freedom, it becomes impossible to use conventional approaches based on moments/cumulants of order one or higher than two. To circumvent this issue, herein we propose fitting such a distribution to that of a scaled Student's $t$ RV by exploiting the second moment together with either the first absolute moment or the characteristic function (CF). For the fitting based on the absolute moment, we depart from the case of the linear combination of $K= 2$ Student's $t$ RVs and then generalize to $K\ge 2$ through a simple iterative procedure. Meanwhile, the CF-based fitting is direct, but its accuracy (measured in terms of the Bhattacharyya distance metric) depends on the CF parameter configuration, for which we propose a simple but accurate approach. We numerically show that the CF-based fitting usually outperforms the absolute moment -based fitting and that both the scale and number of degrees of freedom of the fitting distribution increase almost linearly with $K$.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
Robust Downlink Multi-Antenna Beamforming with Heterogenous CSI: Enabling eMBB and URLLC Coexistence
Authors:
Dian Echevarría Pérez,
Onel L. Alcaraz López,
Hirley Alves
Abstract:
Two of the main problems to achieve ultra-reliable low-latency communications (URLLC) are related to instantaneous channel state information (I-CSI) acquisition and the coexistence with other service modes such as enhanced mobile broadband (eMBB). The former comes from the non-negligible time required for accurate I-CSI acquisition, while the latter, from the heterogeneous and conflicting requirem…
▽ More
Two of the main problems to achieve ultra-reliable low-latency communications (URLLC) are related to instantaneous channel state information (I-CSI) acquisition and the coexistence with other service modes such as enhanced mobile broadband (eMBB). The former comes from the non-negligible time required for accurate I-CSI acquisition, while the latter, from the heterogeneous and conflicting requirements of different nodes sharing the same network resources. In this paper, we leverage the I-CSI of multiple eMBB links and the channel measurement's history of a URLLC user for multi-antenna beamforming design. Specifically, we propose a precoding design that minimizes the transmit power of a base station (BS) providing eMBB and URLLC services with signal-to-interference-plus-noise ratio (SINR) and outage constraints, respectively, by modifying existing I-CSI-based precoding schemes to account for URLLC channel history information. Moreover, we illustrate and validate the proposed method by adopting zero-forcing (ZF) and the transmit power minimization (TPM) precoding with SINR constraints. We show that the ZF implementation outperforms TPM in adverse channel conditions as in Rayleigh fading, while the situation is rapidly reversed as the channel experiences some line-of-sight (LOS). Finally, we determine the confidence levels at which the target outage probabilities are reached. For instance, we show that outage probabilities below $10^{-3}$ are achievable with more than 99$\%$ confidence for both precoding schemes under favorable LOS conditions with 16 transmit antennas and 500 samples of URLLC channel history.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
A Comprehensive Survey on Spectrum Sharing Techniques for 5G/B5G Intelligent Wireless Networks: Opportunities, Challenges and Future Research Directions
Authors:
Anita Patil,
Sridhar Iyer,
Onel L. A. Lopez,
Rahul J Pandya,
Krishna Pai,
Anshuman Kalla,
Rakhee Kallimani
Abstract:
The increasing popularity of Internet of Everything and small-cell devices has enormously accelerated traffic loads. Consequently, increased bandwidth and high data rate requirements stimulate the operation at the millimeter wave and the Tera-Hertz spectrum bands in the fifth generation (5G) and beyond 5G (B5G) wireless networks. Furthermore, efficient spectrum allocation, maximizing the spectrum…
▽ More
The increasing popularity of Internet of Everything and small-cell devices has enormously accelerated traffic loads. Consequently, increased bandwidth and high data rate requirements stimulate the operation at the millimeter wave and the Tera-Hertz spectrum bands in the fifth generation (5G) and beyond 5G (B5G) wireless networks. Furthermore, efficient spectrum allocation, maximizing the spectrum utilization, achieving efficient spectrum sharing (SS), and managing the spectrum to enhance the system performance remain challenging. To this end, recent studies have implemented artificial intelligence and machine learning techniques, enabling intelligent and efficient spectrum leveraging. However, despite many recent research advances focused on maximizing utilization of the spectrum bands, achieving efficient sharing, allocation, and management of the enormous available spectrum remains challenging. Therefore, the current article acquaints a comprehensive survey on intelligent SS methodologies for 5G and B5G wireless networks, considering the applications of artificial intelligence for efficient SS. Specifically, a thorough overview of SS methodologies is conferred, following which the various spectrum utilization opportunities arising from the existing SS methodologies in intelligent wireless networks are discussed. Subsequently, to highlight critical limitations of the existing methodologies, recent literature on existing SS methodologies is reviewed in detail, classifying them based on the implemented technology, i.e., cognitive radio, machine learning, blockchain, and multiple other techniques. Moreover, the related SS techniques are reviewed to highlight significant challenges in the B5G intelligent wireless network. Finally, to provide an insight into the prospective research avenues, the article is concluded by presenting several potential research directions and proposed solutions.
△ Less
Submitted 17 November, 2022; v1 submitted 16 November, 2022;
originally announced November 2022.
-
Joint Coherent and Non-Coherent Detection and Decoding Techniques for Heterogeneous Networks
Authors:
Leatile Marata,
Onel Luis Alcaraz López,
Hamza Djelouat,
Markus Leinonen,
Hirley Alves,
Markku Juntti
Abstract:
Cellular networks that are traditionally designed for human-type communication (HTC) have the potential to provide cost effective connectivity to machine-type communication (MTC). However, MTC is characterized by unprecedented traffic in cellular networks, thus posing a challenge to its successful incorporation. In this work, we propose a unified framework for amicable coexistence of MTC and HTC.…
▽ More
Cellular networks that are traditionally designed for human-type communication (HTC) have the potential to provide cost effective connectivity to machine-type communication (MTC). However, MTC is characterized by unprecedented traffic in cellular networks, thus posing a challenge to its successful incorporation. In this work, we propose a unified framework for amicable coexistence of MTC and HTC. We consider a heterogeneous network where machine-type devices coexist with enhanced mobile broadband (eMBB) devices and propose transceiver techniques that promote efficient signal recovery from these devices. For this, we present an eMBB pilot and MTC data generation strategy that facilitates joint coherent decoding of eMBB data and non-coherent decoding of MTC data. Furthermore, we assess the feasibility of coexistence using receiver operating characteristics, outage probability, and normalized mean square error (NMSE). Our numerical results reveal that a harmonious coexistence of the heterogeneous services can be achieved with properly configured average signal-to-noise ratios and pilot length.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Polarization Diversity-enabled LOS/NLOS Identification via Carrier Phase Measurements
Authors:
Onel L. A. López,
Dileep Kumar,
Antti Tölli
Abstract:
The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenom…
▽ More
The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenomenon to propose a threshold-based LOS/NLOS classifier exploiting weighted differential carrier phase measurements over a single link with different polarization configurations. Operation in either full or limited polarization diversity systems is possible. We develop a framework for assessing the performance of the proposed classifier, and show through simulations the performance impact of the reflecting materials in NLOS scenarios. For instance, the classifier is far more efficient in NLOS scenarios with wooden reflectors than in those with metallic reflectors. Numerical results evince the potential performance gains from exploiting full polarization diversity, properly weighting the differential carrier phase measurements, and using multi-carrier/tone transmissions. Finally, we show that the optimum decision threshold is inversely proportional to the path power gain in dB, while it does not depend significantly on the material of potential NLOS reflectors.
△ Less
Submitted 15 January, 2023; v1 submitted 31 May, 2022;
originally announced June 2022.
-
Energy-Efficient Wake-Up Signalling for Machine-Type Devices Based on Traffic-Aware Long-Short Term Memory Prediction
Authors:
David E. Ruíz-Guirola,
Carlos A. Rodríguez-López,
Samuel Montejo-Sánchez,
Richard Demo Souza,
Onel L. A. López,
Hirley Alves
Abstract:
Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt…
▽ More
Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt to the system dynamics. To overcome this, we design a simple but efficient neural network to predict MTC traffic patterns and configure WuS accordingly. Our proposed forecasting WuS (FWuS) leverages an accurate long-short term memory (LSTM)- based traffic prediction that allows extending the sleep time of MTDs by avoiding frequent page monitoring occasions in idle state. Simulation results show the effectiveness of our approach. The traffic prediction errors are shown to be below 4%, being false alarm and miss-detection probabilities respectively below 8.8% and 1.3%. In terms of energy consumption reduction, FWuS can outperform the best benchmark mechanism in up to 32%. Finally, we certify the ability of FWuS to dynamically adapt to traffic density changes, promoting low-power MTC scalability
△ Less
Submitted 13 June, 2022;
originally announced June 2022.
-
Statistical Analysis of Received Signal Strength in Industrial IoT Distributed Massive MIMO Systems
Authors:
Eduardo Noboro Tominaga,
Onel Luiz Alcaraz López,
Richard Demo Souza,
Hirley Alves
Abstract:
The Fifth Generation (5G) of wireless networks introduced native support for Machine-Type Communication (MTC), which is a key enabler for the Internet of Things (IoT) revolution. Current 5G standards are not yet capable of fully satisfying the requirements of critical MTC (cMTC) and massive MTC (mMTC) use cases. This is the main reason why industry and academia have already started working on tech…
▽ More
The Fifth Generation (5G) of wireless networks introduced native support for Machine-Type Communication (MTC), which is a key enabler for the Internet of Things (IoT) revolution. Current 5G standards are not yet capable of fully satisfying the requirements of critical MTC (cMTC) and massive MTC (mMTC) use cases. This is the main reason why industry and academia have already started working on technical solutions for beyond-5G and Sixth Generation (6G) networks. One technological solution that has been extensively studied is the combination of network densification, massive Multiple-Input Multiple-Output (mMIMO) systems and user-centric design, which is known as distributed mMIMO or Cell-Free (CF) mMIMO. Under this new paradigm, there are no longer cell boundaries: all the Access Points (APs) on the network cooperate to jointly serve all the devices. In this paper, we compare the performance of traditional mMIMO and different distributed mMIMO setups, and quantify the macro diversity and signal spatial diversity performance they provide. Aiming at the uplink in industrial indoor scenarios, we adopt a path loss model based on real measurement campaigns. Monte Carlo simulation results show that the grid deployment of APs provide higher average channel gains, but radio stripes deployments provide lower variability of the received signal strength.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Coordinated Pilot Transmissions for Detecting the Signal Sparsity Level in a Massive IoT Network under Rayleigh Fading
Authors:
Onel L. A. López,
Glauber Brante,
Richard D. Souza,
Markku Juntti,
Matti Latva-aho
Abstract:
Grant-free protocols exploiting compressed sensing (CS) multi-user detection (MUD) are appealing for solving the random access problem in massive machine-type communications (mMTC) with sporadic device activity. Such protocols would greatly benefit from a prior deterministic knowledge of the sparsity level, i.e., instantaneous number of simultaneously active devices $K$. Aiming at this, herein we…
▽ More
Grant-free protocols exploiting compressed sensing (CS) multi-user detection (MUD) are appealing for solving the random access problem in massive machine-type communications (mMTC) with sporadic device activity. Such protocols would greatly benefit from a prior deterministic knowledge of the sparsity level, i.e., instantaneous number of simultaneously active devices $K$. Aiming at this, herein we introduce a framework relying on coordinated pilot transmissions (CPT) over a short phase at the beginning of the transmission block for detecting $K$ in mMTC scenarios under Rayleigh fading. CPT can be implemented either as: i) U-CPT, which exploits only uplink transmissions, or A-CPT, which includes also downlink transmissions for channel state information (CSI) acquisition that resolve fading uncertainty. We discuss two specific implementations of A-CPT: ii) A-CPT-F, which implements CSI-based phase corrections while leveraging the same statistical inverse power control used by U-CPT, and iii) A-CPT-D, which implements a dynamic CSI-based inverse power control, although it requires some active devices to remain in silence if their corresponding channels are too faded. We derive a signal sparsity level detector for each CPT mechanism by relaxing the original integer detection/classification problem to an estimation problem in the continuous real domain followed by a rounding operation. We show that the variance of the relaxed estimator increases with $K^2$ and $K$ when operating with U-CPT and A-CPT mechanisms, respectively. The distribution of the estimators under U-CPT, A-CPT-F and A-CPT-D is found to follow an exponential, Gaussian, and Student's $t-$like distribution, respectively. Analyses evince the superiority of A-CPT-D, which is also corroborated via numerical results. We reveal several interesting trade-offs and highlight potential research directions.
△ Less
Submitted 1 May, 2022;
originally announced May 2022.
-
Latency-Aware Multi-antenna SWIPT System with Battery-Constrained Receivers
Authors:
Dileep Kumar,
Onel L. Alcaraz López,
Satya Krishna Joshi,
Antti Tölli
Abstract:
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. T…
▽ More
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. The battery depletion phenomenon is avoided by preemptively incorporating information regarding the receivers' battery state and EH fluctuations into the resource allocation design. The resulting time-average sum-power minimization problem is temporally correlated, non-convex (including mutually coupled latency-battery queue dynamics), and in general intractable. We use the Lyapunov optimization framework and derive a dynamic control algorithm to transform the original problem into a sequence of deterministic and independent subproblems, which are then solved via two alternative approaches: i) semidefinite relaxation combined with fractional programming, and ii) successive convex approximation. Furthermore, we design a low-complexity closed-form iterative algorithm exploiting the Karush-Kuhn-Tucker optimality conditions for a specific scenario with delay bounded batteryless receivers. Numerical results provide insights on the robustness of the proposed design to realize an energy-efficient SWIPT system while ensuring latency and EH requirements in a time dynamic mobile access network.
△ Less
Submitted 22 October, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Self-energy recycling for low-power reliable networks: Half-duplex or Full-duplex?
Authors:
Dian Echevarría Pérez,
Onel L. Alcaraz López,
Hirley Alves,
Matti Latva-aho
Abstract:
Self-energy recycling (sER), which allows transmit energy re-utilization, has emerged as a viable option for improving the energy efficiency (EE) in low-power Internet of Things networks. In this work, we investigate its benefits also in terms of reliability improvements and compare the performance of full-duplex (FD) and half-duplex (HD) schemes when using multi-antenna techniques in a communicat…
▽ More
Self-energy recycling (sER), which allows transmit energy re-utilization, has emerged as a viable option for improving the energy efficiency (EE) in low-power Internet of Things networks. In this work, we investigate its benefits also in terms of reliability improvements and compare the performance of full-duplex (FD) and half-duplex (HD) schemes when using multi-antenna techniques in a communication system. We analyze the trade-offs when considering not only the energy spent on transmission but also the circuitry power consumption, thus making the analysis of much more practical interest. In addition to the well known spectral efficiency improvements, results show that FD also outperforms HD in terms of reliability. We show that sER introduces not only benefits in EE matters but also some modifications on how to achieve maximum reliability fairness between uplink and downlink transmissions, which is the main goal in this work. In order to achieve this objective, we propose the use of a dynamic FD scheme where the small base station (SBS) determines the optimal allocation of antennas for transmission and reception. We show the significant improvement gains of this strategy for the system outage probability when compared to the simple HD and FD schemes.
△ Less
Submitted 12 November, 2021;
originally announced November 2021.
-
Dynamic RF Combining for Multi-Antenna Ambient Energy Harvesting
Authors:
Onel Luis Alcaraz López,
Bruno Clerckx,
Matti Latva-aho
Abstract:
Ambient radio frequency (RF) energy harvesting (EH) technology is key to realize self-sustainable, always-on, low-power, massive Internet of Things networks. Typically, rigid (non-adaptable to channel fluctuations) multi-antenna receive architectures are proposed to support reliable EH operation. Herein, we introduce a dynamic RF combining architecture for ambient RF EH use cases, and exemplify th…
▽ More
Ambient radio frequency (RF) energy harvesting (EH) technology is key to realize self-sustainable, always-on, low-power, massive Internet of Things networks. Typically, rigid (non-adaptable to channel fluctuations) multi-antenna receive architectures are proposed to support reliable EH operation. Herein, we introduce a dynamic RF combining architecture for ambient RF EH use cases, and exemplify the attainable performance gains via three simple phase shifts' exploration mechanisms, namely, brute force (BF), sequential testing (ST) and codebook based (CB). Among the proposed mechanisms, BF demands the highest power consumption, while CB requires the highest-resolution phase shifters, thus tip** the scales in favor of ST. Finally, we show that the performance gains of ST over a rigid RF combining scheme increase with the number of receive antennas and energy transmitters' deployment density.
△ Less
Submitted 6 December, 2021; v1 submitted 21 July, 2021;
originally announced July 2021.
-
Massive Wireless Energy Transfer with Multiple Power Beacons for very large Internet of Things
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves,
Richard D. Souza,
Samuel Montejo-Sánchez
Abstract:
The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering…
▽ More
The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering massive IoT networks, thus eliminating the need for frequent battery replacement by using the so-called power beacons (PBs). In this paper, we provide a framework for minimizing the sum transmit power of the PBs using devices' positions information and their current battery state. Our strategy aims to reduce the PBs' power consumption and to mitigate the possible impact of the electromagnetic radiation on human health. We also present analytical insights for the case of very distant clusters and evaluate their applicability. Numerical results show that our proposed framework reduces the outage probability as the number of PBs and/or the energy demands increase.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Massive MIMO with Radio Stripes for Indoor Wireless Energy Transfer
Authors:
Onel L. A. López,
Dileep Kumar,
Richard Demo Souza,
Petar Popovski,
Antti Tölli,
Matti Latva-aho
Abstract:
Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approx…
▽ More
Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approximation (SCA), and maximum ratio transmission (MRT) techniques, we derive optimal and sub-optimal precoders aimed at minimizing the radio stripes' transmit power while exploiting information of the power transfer efficiency of the EH circuits at the UEs. Moreover, we propose an analytical framework to assess and control the electromagnetic field (EMF) radiation exposure in the considered indoor scenario. Numerical results show that i) the EMF radiation exposure can be more easily controlled at higher frequencies at the cost of a higher transmit power consumption, ii) training is not a very critical factor for the considered indoor system, iii) MRT/SCA-based precoders are particularly appealing when serving a small number of UEs, thus, especially suitable for implementation in a time domain multiple access (TDMA) scheduling framework, and iv) TDMA is more efficient than spatial domain multiple access (SDMA) when serving a relatively small number of UEs. Results suggest that additional boosting performance strategies are needed to increase the overall system efficiency, thus making the technology viable in practice.
△ Less
Submitted 28 February, 2022; v1 submitted 23 June, 2021;
originally announced June 2021.
-
Massive Wireless Energy Transfer with Statistical CSI Beamforming
Authors:
Francisco A. Monteiro,
Onel L. A. López,
Hirley Alves
Abstract:
Wireless energy transfer (WET) is a promising solution to enable massive machine-type communications (mMTC) with low-complexity and low-powered wireless devices. Given the energy restrictions of the devices, instant channel state information at the transmitter (CSIT) is not expected to be available in practical WET-enabled mMTC. However, because it is common that the terminals appear spatially clu…
▽ More
Wireless energy transfer (WET) is a promising solution to enable massive machine-type communications (mMTC) with low-complexity and low-powered wireless devices. Given the energy restrictions of the devices, instant channel state information at the transmitter (CSIT) is not expected to be available in practical WET-enabled mMTC. However, because it is common that the terminals appear spatially clustered, some degree of spatial correlation between their channels to the base station (BS) is expected to occur. The paper considers a massive antenna array at the BS for WET that only has access to i) the first and second order statistics of the Rician channel component of the multiple-input multiple-output (MIMO) channel and also to ii) the line-of-sight MIMO component. The optimal precoding scheme that maximizes the total energy available to the single-antenna devices is derived considering a continuous alphabet for the precoders, permitting any modulated or deterministic waveform. This may lead to some devices in the clusters being assigned a low fraction of the total available power in the cluster, creating a rather uneven situation among them. Consequently, a fairness criterion is introduced, imposing a minimum amount of power allocated to the terminals. A piece-wise linear harvesting circuit is considered at the terminals, with both saturation and a minimum sensitivity, and a constrained version of the precoder is also proposed by solving a non-linear programming problem. A paramount benefit of the constrained precoder is the encompassment of fairness in the power allocation to the different clusters. Moreover, given the polynomial complexity increase of the proposed unconstrained precoder, and the observed linear gain of the system's available sum-power with an increasing number of antennas at the ULA, the use of massive antenna arrays is desirable.
△ Less
Submitted 11 July, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Joint Channel Estimation and Device Activity Detection in Heterogeneous Networks
Authors:
Leatile Marata,
Onel Luis Alcaraz López,
Eduardo Noboro Tominaga,
Hirley Alves
Abstract:
Internet of Things (IoT) has triggered a rapid increase in the number of connected devices and new use cases of wireless communications. To meet the new demands, the fifth generation (5G) of wireless communication systems features native machine type communication (MTC) services in addition to traditional human type communication (HTC) services. Some of the main challenges are the heterogeneous re…
▽ More
Internet of Things (IoT) has triggered a rapid increase in the number of connected devices and new use cases of wireless communications. To meet the new demands, the fifth generation (5G) of wireless communication systems features native machine type communication (MTC) services in addition to traditional human type communication (HTC) services. Some of the main challenges are the heterogeneous requirements and the sporadic traffic of massive MTC (mMTC), which makes the orthogonal allocation of resources infeasible. To overcome this problem, grant free non-orthogonal multiple access schemes have been proposed alongside with sparse signal recovery algorithms. While most of the related works have considered only homogeneous networks, we focus on a scenario where an enhanced mobile broadband (eMBB) device and multiple MTC devices share the same radio resources. We exploit the approximate message passing (AMP) algorithm for joint device activity detection and channel estimation of MTC devices in the presence of interference from eMBB, and evaluate the system performance in terms of receiver operating characteristics (ROC) and channel estimation errors. Moreover, we also propose two new pilot sequence generation strategies which improve the detection capabilities of the MTC receiver without affecting the eMBB service.
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
CSI-free Rotary Antenna Beamforming for Massive RF Wireless Energy Transfer
Authors:
Onel L. A. López,
Hirley Alves,
Samuel Montejo-Sánchez,
Richard D. Souza,
Matti Latva-aho
Abstract:
Radio frequency (RF) wireless energy transfer (WET) is a key technology that may allow seamlessly powering future massive low-energy Internet of Things (IoT) networks. To enable efficient massive WET, channel state information (CSI)-limited/free multi-antenna transmit schemes have been recently proposed in the literature. The idea is to reduce/null the energy costs to be paid by energy harvesting…
▽ More
Radio frequency (RF) wireless energy transfer (WET) is a key technology that may allow seamlessly powering future massive low-energy Internet of Things (IoT) networks. To enable efficient massive WET, channel state information (CSI)-limited/free multi-antenna transmit schemes have been recently proposed in the literature. The idea is to reduce/null the energy costs to be paid by energy harvesting (EH) IoT nodes from participating in large-scale time/power-consuming CSI training, but still enable some transmit spatial gains. In this paper, we take another step forward by proposing a novel CSI-free rotary antenna beamforming (RAB) WET scheme that outperforms all state-of-the-art CSI-free schemes in a scenario where a power beacon (PB) equipped with a uniform linear array (ULA) powers a large set of surrounding EH IoT devices. RAB uses a properly designed CSI-free beamformer combined with a continuous or periodic rotation of the ULA at the PB to provide average EH gains that scale as $0.85\sqrt{M}$, where $M$ is the number of PB's antenna elements. Moreover, a rotation-specific power control mechanism was proposed to i) fairly optimize the WET process if devices' positioning information is available, and/or ii) to avoid hazards to human health in terms of specific absorption rate (SAR). We show that RAB performance even approaches quickly (or surpasses, for scenarios with sufficiently large number of EH devices, or when using the proposed power control) the performance of a traditional full-CSI based transmit scheme, and it is also less sensitive to SAR constraints. Finally, we discuss important practicalities related to RAB such as its robustness against non line-of-sight conditions compared to other CSI-free WET schemes, and its generalizability to scenarios where the PB uses other than a ULA topology.
△ Less
Submitted 27 August, 2021; v1 submitted 26 April, 2021;
originally announced April 2021.
-
On the SIR Meta Distribution in Massive MTCNetworks with Scheduling and Data Aggregation
Authors:
Nelson J. Mayedo Rodríguez,
Onel L. Alcaraz López,
Hirley Alves,
Matti Latva-aho
Abstract:
Data aggregation is an efficient approach to handle the congestion introduced by a massive number of machine type devices (MTDs). The aggregators not only collect data but also implement scheduling mechanisms to cope with scarce network resources. We use the concept of meta distribution (MD) of the signal-to-interference ratio (SIR) to gain a complete understanding of the per-link reliability and…
▽ More
Data aggregation is an efficient approach to handle the congestion introduced by a massive number of machine type devices (MTDs). The aggregators not only collect data but also implement scheduling mechanisms to cope with scarce network resources. We use the concept of meta distribution (MD) of the signal-to-interference ratio (SIR) to gain a complete understanding of the per-link reliability and describe the performance of two scheduling methods for data aggregation of machine type communication (MTC): random resource scheduling (RRS) and channel-aware resource scheduling (CRS). The results show the fraction of users in the network that achieves a target reliability, which is an important aspect to consider when designing wireless systems with stringent service requirements.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
Network Slicing for eMBB and mMTC with NOMA and Space Diversity Reception
Authors:
Eduardo Noboro Tominaga,
Hirley Alves,
Onel Luiz Alcaraz López,
Richard Demo Souza,
João Luiz Rebelatto,
Matti Latva-Aho
Abstract:
In this work we study the coexistence in the same Radio Access Network (RAN) of two generic services present in the Fifth Generation (5G) of wireless communication systems: enhanced Mobile BroadBand (eMBB) and massive Machine-Type Communications (mMTC). eMBB services are requested for applications that demand extremely high data rates and moderate requirements on latency and reliability, whereas m…
▽ More
In this work we study the coexistence in the same Radio Access Network (RAN) of two generic services present in the Fifth Generation (5G) of wireless communication systems: enhanced Mobile BroadBand (eMBB) and massive Machine-Type Communications (mMTC). eMBB services are requested for applications that demand extremely high data rates and moderate requirements on latency and reliability, whereas mMTC enables applications for connecting a massive number of low-power and low-complexity devices. The coexistence of both services is enabled by means of network slicing and Non-Orthogonal Multiple Access (NOMA) with Successive Interference Cancellation (SIC) decoding. Under the orthogonal slicing, the radio resources are exclusively allocated to each service, while in the non-orthogonal slicing the traffics from both services overlap in the same radio resources. We evaluate the uplink performance of both services in a scenario with a multi-antenna Base Station (BS). Our simulation results show that the performance gains obtained through multiple receive antennas are more accentuated for the non-orthogonal slicing than for the orthogonal allocation of resources, such that the non-orthogonal slicing outperforms its orthogonal counterpart in terms of achievable data rates or number of connected devices as the number of receive antennas increases.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
On the Optimal Deployment of Power Beacons for Massive Wireless Energy Transfer
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves,
Samuel Montejo-Sánchez,
Matti Latva-aho
Abstract:
Wireless energy transfer (WET) is emerging as an enabling green technology for Internet of Things (IoT) networks. WET allows the IoT devices to wirelessly recharge their batteries with energy from external sources such as dedicated radio frequency transmitters called power beacons (PBs). In this paper, we investigate the optimal deployment of PBs that guarantees a network-wide energy outage constr…
▽ More
Wireless energy transfer (WET) is emerging as an enabling green technology for Internet of Things (IoT) networks. WET allows the IoT devices to wirelessly recharge their batteries with energy from external sources such as dedicated radio frequency transmitters called power beacons (PBs). In this paper, we investigate the optimal deployment of PBs that guarantees a network-wide energy outage constraint. Optimal positions for the PBs are determined by maximizing the average incident power for the worst location in the service area since no information about the sensor deployment is provided. Such network planning guarantees the fairest harvesting performance for all the IoT devices. Numerical simulations evidence that our proposed optimization framework improves the energy supply reliability compared to benchmark schemes. Additionally, we show that although both, the number of deployed PBs and the number of antennas per PB, introduce performance improvements, the former has a dominant role. Finally, our proposal allows to extend the coverage area while kee** the total power budget fixed, which additionally reduces the level of electromagnetic radiation in the vicinity of PBs.
△ Less
Submitted 4 March, 2021; v1 submitted 8 December, 2020;
originally announced December 2020.
-
Ultra-low Latency, Low Energy and Massiveness in the 6G Era via Efficient CSIT-limited Schemes
Authors:
Onel L. A. López,
Nurul H. Mahmood,
Hirley Alves,
Carlos M. Lima,
Matti Latva-aho
Abstract:
Channel state information (CSI) has been a key component in traditional wireless communication systems. This might no longer hold in future networks supporting services with stringent quality of service constraints such as extremely low-latency, low-energy and/or large number of simultaneously connected devices, where acquiring CSI would become extremely costly or even impractical. We overview the…
▽ More
Channel state information (CSI) has been a key component in traditional wireless communication systems. This might no longer hold in future networks supporting services with stringent quality of service constraints such as extremely low-latency, low-energy and/or large number of simultaneously connected devices, where acquiring CSI would become extremely costly or even impractical. We overview the main limitations of CSI at transmitter side (CSIT)-based designs toward the 6G era, assess how to design and use efficient CSIT-limited schemes that allow meeting the new and stringent requirements, and highlight some key research directions. We delve into the ideas of efficiently allocating pilot sequences, relying on statistical CSIT and/or using location-based strategies, and demonstrate viability via a selected use case.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.
-
A Low-Complexity Beamforming Design for Multiuser Wireless Energy Transfer
Authors:
Onel L. A. López,
Francisco A. Monteiro,
Hirley Alves,
Rui Zhang,
Matti Latva-aho
Abstract:
Wireless energy transfer (WET) is a green enabler of low-power Internet of Things (IoT). Therein, traditional optimization schemes relying on full channel state information (CSI) are often too costly to implement due to excessive energy consumption and high processing complexity. This letter proposes a simple, yet effective, energy beamforming scheme that allows a multi-antenna power beacon (PB) t…
▽ More
Wireless energy transfer (WET) is a green enabler of low-power Internet of Things (IoT). Therein, traditional optimization schemes relying on full channel state information (CSI) are often too costly to implement due to excessive energy consumption and high processing complexity. This letter proposes a simple, yet effective, energy beamforming scheme that allows a multi-antenna power beacon (PB) to fairly power a set of IoT devices by only relying on the first-order statistics of the channels. In addition to low complexity, the proposed scheme performs favorably as compared to benchmarking schemes and its performance improves as the number of PB's antennas increases. Finally, it is shown that further performance improvement can be achieved through proper angular rotations of the PB.
△ Less
Submitted 28 August, 2020;
originally announced August 2020.
-
CSI-free vs CSI-based multi-antenna WET for massive low-power Internet of Things
Authors:
Onel L. A. López,
Nurul Huda Mahmood,
Hirley Alves,
Matti Latva-aho
Abstract:
Wireless Energy Transfer (WET) is a promising solution for powering massive Internet of Things deployments. An important question is whether the costly Channel State Information (CSI) acquisition procedure is necessary for optimum performance. In this paper, we shed some light into this matter by evaluating CSI-based and CSI-free multi-antenna WET schemes in a setup with WET in the downlink, and p…
▽ More
Wireless Energy Transfer (WET) is a promising solution for powering massive Internet of Things deployments. An important question is whether the costly Channel State Information (CSI) acquisition procedure is necessary for optimum performance. In this paper, we shed some light into this matter by evaluating CSI-based and CSI-free multi-antenna WET schemes in a setup with WET in the downlink, and periodic or Poisson-traffic Wireless Information Transfer (WIT) in the uplink. When CSI is available, we show that a maximum ratio transmission beamformer is close to optimum whenever the farthest node experiences at least 3 dB of power attenuation more than the remaining devices. On the other hand, although the adopted CSI-free mechanism is not capable of providing average harvesting gains, it does provide greater WET/WIT diversity with lower energy requirements when compared with the CSI-based scheme. Our numerical results evidence that the CSI-free scheme performs favorably under periodic traffic conditions, but it may be deficient in case of Poisson traffic, specially if the setup is not optimally configured. Finally, we show the prominent performance results when the uplink transmissions are periodic, while highlighting the need of a minimum mean square error equalizer rather than zero-forcing for information decoding.
△ Less
Submitted 22 December, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
Enabling URLLC for Low-Cost IoT Devices via Diversity Combining Schemes
Authors:
Onel L. Alcaraz López,
Nurul Huda Mahmood,
Hirley Alves
Abstract:
Supporting Ultra-Reliable Low-Latency Communication (URLLC) in the Internet of Things (IoT) era is challenging due to stringent constraints on latency and reliability combined with the simple circuitry of IoT nodes. Diversity is usually required for sustaining the reliability levels of URLLC, but there is an additional delay associated to auxiliary procedures to be considered, specially when commu…
▽ More
Supporting Ultra-Reliable Low-Latency Communication (URLLC) in the Internet of Things (IoT) era is challenging due to stringent constraints on latency and reliability combined with the simple circuitry of IoT nodes. Diversity is usually required for sustaining the reliability levels of URLLC, but there is an additional delay associated to auxiliary procedures to be considered, specially when communication includes low-cost IoT devices. Herein, we analyze Selection Combining (SC) and Switch and Stay Combining (SSC) diversity schemes as plausible solutions for enabling ultra-reliable low-latency downlink communications to low-cost IoT devices. We demonstrate the necessity of considering the time spent in auxiliary procedures, which has not been traditionally taken into account, while we show its impact on the reliability performance. We show there is an optimum number of receive antennas, which suggests that under certain conditions it might be required to turn off some of them, specially under the SC operation. We highlight the superiority of SSC with respect to SC as long the associated Signal-to-Noise Ratio threshold is properly selected. We propose using a fixed threshold relying only on long-term channel fading statistics, which leads to near-optimum results.
△ Less
Submitted 4 March, 2020;
originally announced March 2020.
-
On CSI-free Multi-Antenna Schemes for Massive RF Wireless Energy Transfer
Authors:
Onel L. A. López,
Samuel Montejo-Sánchez,
Richard D. Souza,
Hirley Alves,
Constantinos B. Papadias
Abstract:
Wireless Energy Transfer (WET) is emerging as a potential green enabler for massive Internet of Things (IoT). Herein, we analyze Channel State Information (CSI)-free multi-antenna strategies for powering wirelessly a large set of single-antenna IoT devices. The CSI-free schemes are AA-SS (AA-IS), where all antennas transmit the same (independent) signal(s), and SA, where just one antenna transmits…
▽ More
Wireless Energy Transfer (WET) is emerging as a potential green enabler for massive Internet of Things (IoT). Herein, we analyze Channel State Information (CSI)-free multi-antenna strategies for powering wirelessly a large set of single-antenna IoT devices. The CSI-free schemes are AA-SS (AA-IS), where all antennas transmit the same (independent) signal(s), and SA, where just one antenna transmits at a time such that all antennas are utilized during the coherence block. We characterize the distribution of the provided energy under correlated Rician fading for each scheme and find out that while AA-IS and SA cannot take advantage of the multiple antennas to improve the average provided energy, its dispersion can be significantly reduced. Meanwhile, AA-SS provides the greatest average energy, but also the greatest energy dispersion, and the gains depend critically on the mean phase shifts between the antenna elements. We find that consecutive antennas must be $π$ phase-shifted for optimum average energy performance under AA-SS. Our numerical results evidenced that correlation is beneficial under AA-SS, while a greater line of sight (LOS) and/or number of antennas is not always beneficial under such scheme. Meanwhile, both AA-IS and SA schemes benefit from small correlation, large LOS and/or large number of antennas.
△ Less
Submitted 15 June, 2020; v1 submitted 6 February, 2020;
originally announced February 2020.
-
Massive Wireless Energy Transfer: Enabling Sustainable IoT Towards 6G Era
Authors:
Onel L. Alcaraz López,
Hirley Alves,
Richard Demo Souza,
Samuel Montejo-Sánchez,
Evelio M. García Fernández,
Matti Latva-aho
Abstract:
Recent advances on wireless energy transfer (WET) make it a promising solution for powering future Internet of Things (IoT) devices enabled by the upcoming sixth generation (6G) era. The main architectures, challenges and techniques for efficient and scalable wireless powering are overviewed in this paper. Candidates enablers such as energy beamforming (EB), distributed antenna systems (DAS), adva…
▽ More
Recent advances on wireless energy transfer (WET) make it a promising solution for powering future Internet of Things (IoT) devices enabled by the upcoming sixth generation (6G) era. The main architectures, challenges and techniques for efficient and scalable wireless powering are overviewed in this paper. Candidates enablers such as energy beamforming (EB), distributed antenna systems (DAS), advances on devices' hardware and programmable medium, new spectrum opportunities, resource scheduling and distributed ledger technology are outlined. Special emphasis is placed on discussing the suitability of channel state information (CSI)-limited/free strategies when powering simultaneously a massive number of devices. The benefits from combining DAS and EB, and from using average CSI whenever available, are numerically illustrated. The pros and cons of the state-of-the-art CSI-free WET techniques in ultra-low power setups are thoroughly revised, and some possible future enhancements are outlined. Finally, key research directions towards realizing WET-enabled massive IoT networks in the 6G era are identified and discussed in detail.
△ Less
Submitted 2 January, 2021; v1 submitted 11 December, 2019;
originally announced December 2019.
-
Rate Control for Wireless-Powered Communication Network with Reliability and Delay Constraints
Authors:
Onel L. Alcaraz López,
Hirley Alves,
Richard Demo Souza,
Samuel Montejo-Sánchez,
Evelio M. García Fernández
Abstract:
We consider a two-phase Wireless-Powered Communication Network under Nakagami-m fading, where a wireless energy transfer process first powers a sensor node that then uses such energy to transmit its data in the wireless information transmission phase. We explore a fixed transmit rate scheme designed to cope with the reliability and delay constraints of the system while attaining closed-form approx…
▽ More
We consider a two-phase Wireless-Powered Communication Network under Nakagami-m fading, where a wireless energy transfer process first powers a sensor node that then uses such energy to transmit its data in the wireless information transmission phase. We explore a fixed transmit rate scheme designed to cope with the reliability and delay constraints of the system while attaining closed-form approximations for the optimum wireless energy transfer and wireless information transmission blocklength. Then, a more-elaborate rate control strategy exploiting the readily available battery charge information is proposed and the results evidence its outstanding performance when compared with the fixed transmit rate, for which no battery charge information is available. It even reaches an average rate performance close to that of an ideal scheme requiring full Channel State Information at transmitter side. Numerical results show the positive impact of a greater number of antennas at the destination, and evidence that the greater the reliability constraints, the smaller the message sizes on average, and the smaller the optimum information blocklengths. Finally, we corroborate the appropriateness of using the asymptotic blocklength formulation as an approximation of the non-asymptotic finite blocklength results.
△ Less
Submitted 30 August, 2019;
originally announced September 2019.