-
Stacking fault energy of face-centered cubic metals: thermodynamic and ab initio approaches
Authors:
Ruihuan Li,
Song Lu,
Dongyoo Kim,
Stephan Schönecker,
Jijun Zhao,
Se Kyun Kwon,
Levente Vitos
Abstract:
The formation energy of the interface between face-centered cubic (fcc) and hexagonal close packed (hcp) structures is a key parameter in determining the stacking fault energy (SFE) of fcc metals and alloys using thermodynamic calculations. Often the contribution of the planar fault energy to the SFE has the same order of magnitude as the bulk part, and thus the lack of a precise information about…
▽ More
The formation energy of the interface between face-centered cubic (fcc) and hexagonal close packed (hcp) structures is a key parameter in determining the stacking fault energy (SFE) of fcc metals and alloys using thermodynamic calculations. Often the contribution of the planar fault energy to the SFE has the same order of magnitude as the bulk part, and thus the lack of a precise information about it can become the limiting factor in thermodynamic predictions. Here, we differentiate between the actual interfacial energy for the coherent fcc(111)/hcp(0001) interface and the "pseudo-interfacial energy" that enters the thermodynamic expression for the SFE. Using first-principles calculations, we determine the coherent and pseudo- interfacial energies for six elemental metals (Al, Ni, Cu, Ag, Pt, and Au) and for three paramagnetic Fe-Cr-Ni alloys. Our results show that the two interfacial energies significantly differ from each other. We observe a strong chemistry dependence of both interfacial energies. The calculated pseudo-interfacial energies for the Fe-Cr-Ni steels agree well with the available literature data.
△ Less
Submitted 27 November, 2015;
originally announced November 2015.
-
First-Principles prediction of the deformation modes in austenitic Fe-Cr-Ni alloys
Authors:
Wei Li,
Song Lu,
Dongyoo Kim,
Se Kyun Kwon,
Kalevi Kokko,
Levente Vitos
Abstract:
First-principles alloy theory is used to establish the $γ$-surface of Fe-Cr-Ni alloys as function of chemical composition and temperature. The theoretical stacking fault energy (SFE) versus chemistry and temperature trends agree well with experiments. Combining our results with the recent plasticity theory based on the $γ$-surface, the stacking fault formation is predicted to be the leading deform…
▽ More
First-principles alloy theory is used to establish the $γ$-surface of Fe-Cr-Ni alloys as function of chemical composition and temperature. The theoretical stacking fault energy (SFE) versus chemistry and temperature trends agree well with experiments. Combining our results with the recent plasticity theory based on the $γ$-surface, the stacking fault formation is predicted to be the leading deformation mechanism for alloys with effective stacking fault energy below about 18 mJ m$^{-2}$. Alloys with SFE above this critical value show both twinning and full slip at room temperature and twinning remains a possible deformation mode even at elevated temperatures, in line with observations.
△ Less
Submitted 27 November, 2015;
originally announced November 2015.
-
Effect of interstitial-driven lattice expansion on the stacking fault energy in austenitic steels
Authors:
Song Lu,
Wei Li,
Se Kyun Kwon,
Kalevi Kokko,
Qing-Miao Hu,
Staffan Hertzman,
Levente Vitos
Abstract:
Interstitials (carbon and nitrogen) are crucial alloying elements for optimizing the mechanical performance of the twinning-induced plasticity (TWIP) steels in terms of the stacking fault energy (SFE). First-principles calculations have been performed to study the effect of interstitial-induced lattice expansion on the SFE. Comparing the predictions with the SFEs measured for alloys containing C a…
▽ More
Interstitials (carbon and nitrogen) are crucial alloying elements for optimizing the mechanical performance of the twinning-induced plasticity (TWIP) steels in terms of the stacking fault energy (SFE). First-principles calculations have been performed to study the effect of interstitial-induced lattice expansion on the SFE. Comparing the predictions with the SFEs measured for alloys containing C and N, our results suggest that the dominant effect of these interstitials on the SFE is due to the lattice expansion effect.
△ Less
Submitted 27 November, 2015;
originally announced November 2015.
-
Ab initio prediction of the mechanical properties of alloys: The case of Ni/Mn-doped ferromagnetic Fe
Authors:
Guisheng Wang,
Stephan Schönecker,
Staffan Hertzman,
Qing-Miao Hu,
Börje Johansson,
Se Kyun Kwon,
Levente Vitos
Abstract:
First-principles alloy theory, formulated within the exact muffin-tin orbitals method in combination with the coherent-potential approximation, is used to study the mechanical properties of ferromagnetic body-centered cubic (bcc) Fe$_{1-x}$M$_x$ alloys (M=Mn or Ni, $0\le x \le 0.1$). We consider several physical parameters accessible from \emph{ab initio} calculations and their combinations in var…
▽ More
First-principles alloy theory, formulated within the exact muffin-tin orbitals method in combination with the coherent-potential approximation, is used to study the mechanical properties of ferromagnetic body-centered cubic (bcc) Fe$_{1-x}$M$_x$ alloys (M=Mn or Ni, $0\le x \le 0.1$). We consider several physical parameters accessible from \emph{ab initio} calculations and their combinations in various phenomenological models to compare the effect of Mn and Ni on the properties of Fe. Alloying is found to slightly alter the lattice parameters and produce noticeable influence on elastic moduli. Both Mn and Ni decrease the surface energy and the unstable stacking fault energy associated with the $\{110\}$ surface facet and the $\{110\}\langle111\rangle$ slip system, respectively. Nickel is found to produce larger effect on the planar fault energies than Mn. The semi-empirical ductility criteria by Rice and Pugh consistently predict that Ni enhances the ductility of Fe but give contradictory results in the case of Mn do**. The origin of the discrepancy between the two criteria is discussed and an alternative measure of the ductile-brittle behavior based on the theoretical cleavage strength and single-crystal shear modulus $G\{110\}\langle111\rangle$ is proposed.
△ Less
Submitted 20 May, 2015;
originally announced May 2015.
-
Surface parameters of ferritic iron-rich Fe-Cr alloy
Authors:
Stephan Schönecker,
Se Kyun Kwon,
Börje Johansson,
Levente Vitos
Abstract:
Using first-principles density functional theory in the implementation of the exact muffin-tin orbitals method and the coherent potential approximation, we studied the surface energy and the surface stress of the thermodynamically most stable surface facet (100) of the homogeneous disordered body-centred cubic iron-chromium system in the concentration interval up to 20 at.% Cr. For the low-index s…
▽ More
Using first-principles density functional theory in the implementation of the exact muffin-tin orbitals method and the coherent potential approximation, we studied the surface energy and the surface stress of the thermodynamically most stable surface facet (100) of the homogeneous disordered body-centred cubic iron-chromium system in the concentration interval up to 20 at.% Cr. For the low-index surface facets of Fe and Cr, the surface energy of Cr is slightly larger than the one of Fe, while the surface stress of Cr is considerably smaller than the one of Fe. We find that Cr addition to Fe generally increases the surface energy of the Fe-Cr alloy, however, an increase of the bulk amount of Cr also increases the surface stress. As a result of this unexpected trend, the (100) surface of Fe-Cr becomes more stable against reconstruction with increasing Cr concentration. We show that the observed trends are of magnetic origin. In addition to the homogeneous alloy case, we also investigated the impact of surface segregation on both surface parameters.
△ Less
Submitted 20 June, 2013; v1 submitted 4 April, 2013;
originally announced April 2013.
-
The origin of the stabilized simple-cubic structure in Po
Authors:
B. I. Min,
J. H. Shim,
Min Sik Park,
Kyoo Kim,
S. K. Kwon,
S. J. Youn
Abstract:
The origin of the stabilized simple-cubic (SC) structure in Po is explored by using the first principle band calculations. We have found that the prime origin is the inherent strong spin-orbit (SO) interaction in Po, which suppresses the Peierls-like structural instability as usually occurs in p-bonded systems. Based on the systematic analysis of electronic structures, charge densities, Fermi su…
▽ More
The origin of the stabilized simple-cubic (SC) structure in Po is explored by using the first principle band calculations. We have found that the prime origin is the inherent strong spin-orbit (SO) interaction in Po, which suppresses the Peierls-like structural instability as usually occurs in p-bonded systems. Based on the systematic analysis of electronic structures, charge densities, Fermi surfaces, and susceptibilities of Se, Te, and Po, we have proved that the stable crystal structure in VIA elements is determined by the competition between the SO splitting and the crystal field splitting induced by the low-symmetry structural transition. The trigonal structure is stabilized in Se and Te by the larger crystal field splitting than the SO splitting, whereas in Po the SC structure is stabilized by the large SO splitting.
△ Less
Submitted 8 December, 2005;
originally announced December 2005.
-
Photoemission and x-ray absorption spectroscopy study of electron-doped colossal magnetoresistance manganite: La0.7Ce0.3MnO3 film
Authors:
S. W. Han,
J. -S. Kang,
K. H. Kim,
J. D. Lee,
J. H. Kim,
S. C. Wi,
C. Mitra,
P. Raychaudhuri,
S. Wirth,
K. J. Kim,
B. S. Kim,
J. I. Jeong,
S. K. Kwon,
B. I. Min
Abstract:
The electronic structure of La0.7Ce0.3MnO3 (LCeMO) thin film has been investigated using photoemission spectroscopy (PES) and x-ray absorption spectroscopy (XAS). The Ce 3d core-level PES and XAS spectra of LCeMO are very similar to those of CeO2, indicating that Ce ions are far from being trivalent. A very weak 4f resonance is observed around the Ce 4d $\to$ 4f absorption edge, suggesting that…
▽ More
The electronic structure of La0.7Ce0.3MnO3 (LCeMO) thin film has been investigated using photoemission spectroscopy (PES) and x-ray absorption spectroscopy (XAS). The Ce 3d core-level PES and XAS spectra of LCeMO are very similar to those of CeO2, indicating that Ce ions are far from being trivalent. A very weak 4f resonance is observed around the Ce 4d $\to$ 4f absorption edge, suggesting that the localized Ce 4f states are almost empty in the ground state. The Mn 2p XAS spectrum reveals the existence of the Mn(2+) multiplet feature, confirming the Mn(2+)-Mn(3+) mixed-valent states of Mn ions in LCeMO. The measured Mn 3d PES/XAS spectra for LCeMO agrees reasonably well with the calculated Mn 3d PDOS using the LSDA+U method. The LSDA+U calculation predicts a half-metallic ground state for LCeMO.
△ Less
Submitted 8 September, 2003;
originally announced September 2003.
-
Li intercalation effects on magnetism in undoped and Co-doped anatase TiO$_2$
Authors:
Min Sik Park,
S. K. Kwon,
B. I. Min
Abstract:
The effects of $n$-type carrier do** by Li intercalation on magnetism in undoped and Co-doped anatase TiO$_2$ are investigated. We have found that doped $n$-type carriers in TiO$_2$ are localized mainly at Ti sites near the intercalated Li. With increasing the intercalation, local spins are realized at Ti. In the case of Co-doped TiO$_2$, most of the added $n$-type carriers fill the Co 3$d$ ba…
▽ More
The effects of $n$-type carrier do** by Li intercalation on magnetism in undoped and Co-doped anatase TiO$_2$ are investigated. We have found that doped $n$-type carriers in TiO$_2$ are localized mainly at Ti sites near the intercalated Li. With increasing the intercalation, local spins are realized at Ti. In the case of Co-doped TiO$_2$, most of the added $n$-type carriers fill the Co 3$d$ bands and the rest are localized at Ti. Therefore, Co magnetic moment vanishes by Li intercalation to have a nonmagnetic ground state.
△ Less
Submitted 10 September, 2002;
originally announced September 2002.
-
Electronic structures of doped anatase $\rm TiO_{2}$: $\rm Ti_{1-x}M_{x}O_{2}$ (M=Co, Mn, Fe, Ni)
Authors:
Min Sik Park,
S. K. Kwon,
B. I. Min
Abstract:
We have investigated electronic structures of a room temperature diluted magnetic semiconductor : Co-doped anatase $\rm TiO_{2}$. We have obtained the half-metallic ground state in the local-spin-density approximation(LSDA) but the insulating ground state in the LSDA+$U$+SO incorporating the spin-orbit interaction. In the stoichiometric case, the low spin state of Co is realized with the substan…
▽ More
We have investigated electronic structures of a room temperature diluted magnetic semiconductor : Co-doped anatase $\rm TiO_{2}$. We have obtained the half-metallic ground state in the local-spin-density approximation(LSDA) but the insulating ground state in the LSDA+$U$+SO incorporating the spin-orbit interaction. In the stoichiometric case, the low spin state of Co is realized with the substantially large orbital moment. However, in the presence of oxygen vacancies near Co, the spin state of Co becomes intermediate. The ferromagnetisms in the metallic and insulating phases are accounted for by the double-exchange-like and the superexchange mechanism, respectively. Further, the magnetic ground states are obtained for Mn and Fe doped $\rm TiO_{2}$, while the paramagnetic ground state for Ni-doped $\rm TiO_{2}$.
△ Less
Submitted 7 February, 2002;
originally announced February 2002.
-
Electronic structure of metallic antiperovskite compound GaCMn$_3$
Authors:
J. H. Shim,
S. K. Kwon,
B. I. Min
Abstract:
We have investigated electronic structures of antiperovskite GaCMn$_3$ and related Mn compounds SnCMn$_3$, ZnCMn$_3$, and ZnNMn$_3$. In the paramagnetic state of GaCMn$_3$, the Fermi surface nesting feature along the $Γ{\rm R}$ direction is observed, which induces the antiferromagnetic (AFM) spin ordering with the nesting vector {\bf Q} $\sim Γ{\rm R}$. Calculated susceptibilities confirm the ne…
▽ More
We have investigated electronic structures of antiperovskite GaCMn$_3$ and related Mn compounds SnCMn$_3$, ZnCMn$_3$, and ZnNMn$_3$. In the paramagnetic state of GaCMn$_3$, the Fermi surface nesting feature along the $Γ{\rm R}$ direction is observed, which induces the antiferromagnetic (AFM) spin ordering with the nesting vector {\bf Q} $\sim Γ{\rm R}$. Calculated susceptibilities confirm the nesting scenario for GaCMn$_3$ and also explain various magnetic structures of other antiperovskite compounds. Through the band folding effect, the AFM phase of GaCMn$_3$ is stabilized. Nearly equal densities of states at the Fermi level in the ferromagnetic and AFM phases of GaCMn$_3$ indicate that two phases are competing in the ground state.
△ Less
Submitted 18 January, 2002;
originally announced January 2002.
-
Half-metallic antiferromagnets in double perovskites: LaAVRuO$_6$ (A=Ca, Sr, and Ba)
Authors:
J. H. Park,
S. K. Kwon,
B. I. Min
Abstract:
Based on the theoretical exploration of electronic structures, we propose that the ordered double perovskites LaAVRuO$_6$ and LaVO$_3$/ARuO$_3$ (001) superlattice (A = Ca, Sr and Ba) are strong candidates for half-metallic (HM) antiferromagnets (AFMs). %LaAVRuO$_6$ and LaVO$_3$/ARuO$_3$ have the %100% spin polarizations at the Fermi level but with zero %total magnetic moments. We have shown that…
▽ More
Based on the theoretical exploration of electronic structures, we propose that the ordered double perovskites LaAVRuO$_6$ and LaVO$_3$/ARuO$_3$ (001) superlattice (A = Ca, Sr and Ba) are strong candidates for half-metallic (HM) antiferromagnets (AFMs). %LaAVRuO$_6$ and LaVO$_3$/ARuO$_3$ have the %100% spin polarizations at the Fermi level but with zero %total magnetic moments. We have shown that the HM-AFM nature in LaAVRuO$_6$ is very robust regardless of (i) divalent ion replacement at A-sites, (ii) oxygen site relaxation, (iii) the inclusion of the Coulomb correlation, and (iv) cation disorder. A type of the double exchange interaction is expected to be responsible for the half-metallicity and the antiferromagnetism in these systems.
△ Less
Submitted 6 December, 2001;
originally announced December 2001.
-
Electronic Structures of Antiperovskite Superconductor MgCNi$_3$ and Related Compounds
Authors:
J. H. Shim,
S. K. Kwon,
B. I. Min
Abstract:
Electronic structure of a newly discovered antiperovskite superconductor MgCNi$_3$ is investigated by using the LMTO band method. The main contribution to the density of states (DOS) at the Fermi energy $E_{\rm F}$ comes from Ni 3$d$ states which are hybridized with C 2$p$ states. The DOS at $E_{\rm F}$ is varied substantially by the hole or electron do** due to the very high and narrow DOS pe…
▽ More
Electronic structure of a newly discovered antiperovskite superconductor MgCNi$_3$ is investigated by using the LMTO band method. The main contribution to the density of states (DOS) at the Fermi energy $E_{\rm F}$ comes from Ni 3$d$ states which are hybridized with C 2$p$ states. The DOS at $E_{\rm F}$ is varied substantially by the hole or electron do** due to the very high and narrow DOS peak located just below $E_{\rm F}$. We have also explored electronic structures of C-site and Mg-site doped MgCNi$_3$ systems, and described the superconductivity in terms of the conventional phonon mechanism.
△ Less
Submitted 22 October, 2001;
originally announced October 2001.
-
New High Temperature Diboride Superconductors: AgB2 and AuB2
Authors:
S. K. Kwon,
S. J. Youn,
K. S. Kim,
B. I. Min
Abstract:
Based on electronic structure calculations, we have found that noble metal diborides, AgB2 and AuB2, are potential candidates for conventional BCS-type high temperature superconductors. B 2p density of states dominates at the Fermi level in comparison with Ag 4d and Au 5d states. Furthermore, the electron-phonon coupling constant λis much larger in AgB2 and AuB2 than in MgB2. Estimated transitio…
▽ More
Based on electronic structure calculations, we have found that noble metal diborides, AgB2 and AuB2, are potential candidates for conventional BCS-type high temperature superconductors. B 2p density of states dominates at the Fermi level in comparison with Ag 4d and Au 5d states. Furthermore, the electron-phonon coupling constant λis much larger in AgB2 and AuB2 than in MgB2. Estimated transition temperatures for AgB2 and AuB2 are T_c = 59 K and 72 K, respectively. These are about 2 ~ 3 times higher than the estimated T_c = 27 K in MgB2 and almost comparable to those in cuprate superconductors.
△ Less
Submitted 23 June, 2001;
originally announced June 2001.
-
Charge and Orbital Ordering and Spin State Transition Driven by Structural Distortion in YBaCo_2O_5
Authors:
S. K. Kwon,
B. I. Min
Abstract:
We have investigated electronic structures of antiferromagnetic YBaCo_2O_5 using the local spin-density approximation (LSDA) + U method. The charge and orbital ordered insulating ground state is correctly obtained with the strong on-site Coulomb interaction. Co^{2+} and Co^{3+} ions are found to be in the high spin (HS) and intermediate spin (IS) state, respectively. It is considered that the te…
▽ More
We have investigated electronic structures of antiferromagnetic YBaCo_2O_5 using the local spin-density approximation (LSDA) + U method. The charge and orbital ordered insulating ground state is correctly obtained with the strong on-site Coulomb interaction. Co^{2+} and Co^{3+} ions are found to be in the high spin (HS) and intermediate spin (IS) state, respectively. It is considered that the tetragonal to orthorhombic structural transition is responsible for the ordering phenomena and the spin states of Co ions. The large contribution of the orbital moment to the total magnetic moment indicates that the spin-orbit coupling is also important in YBaCo_2O_5.
△ Less
Submitted 22 May, 2000;
originally announced May 2000.
-
Unquenched large orbital magnetic moment in NiO
Authors:
S. K. Kwon,
B. I. Min
Abstract:
Magnetic properties of NiO are investigated by incorporating the spin-orbit interaction in the LSDA+U scheme. It is found that the large part of orbital moment remains unquenched in NiO. The orbital moment contributes about mu_L = 0.29 mu_B to the total magnetic moment of M = 1.93 mu_B, as leads to the orbital-to-spin angular momentum ratio of L/S = 0.36. The theoretical values are in good agree…
▽ More
Magnetic properties of NiO are investigated by incorporating the spin-orbit interaction in the LSDA+U scheme. It is found that the large part of orbital moment remains unquenched in NiO. The orbital moment contributes about mu_L = 0.29 mu_B to the total magnetic moment of M = 1.93 mu_B, as leads to the orbital-to-spin angular momentum ratio of L/S = 0.36. The theoretical values are in good agreement with recent magnetic X-ray scattering measurements.
△ Less
Submitted 22 March, 2000;
originally announced March 2000.
-
Itinerant ferromagnetism in half-metallic CoS_2
Authors:
S. K. Kwon,
S. J. Youn,
B. I. Min
Abstract:
We have investigated electronic and magnetic properties of the pyrite-type CoS_2 using the linearized muffin-tin orbital (LMTO) band method. We have obtained the ferromagnetic ground state with nearly half-metallic nature. The half-metallic stability is studied by using the fixed spin moment method. The non-negligible orbital magnetic moment of Co 3d electrons is obtained as $μ_L = 0.06 μ_B$ in…
▽ More
We have investigated electronic and magnetic properties of the pyrite-type CoS_2 using the linearized muffin-tin orbital (LMTO) band method. We have obtained the ferromagnetic ground state with nearly half-metallic nature. The half-metallic stability is studied by using the fixed spin moment method. The non-negligible orbital magnetic moment of Co 3d electrons is obtained as $μ_L = 0.06 μ_B$ in the local spin density approximation (LSDA). The calculated ratio of the orbital to spin angular momenta <L_z >/< S_z > = 0.15 is consistent with experiment. The effect of the Coulomb correlation between Co 3d electrons is also explored with the LSDA + U method. The Coulomb correlation at Co sites is not so large, $U \lesssim 1$ eV, and so CoS_2 is possibly categorized as an itinerant ferromagnet. It is found that the observed electronic and magnetic behaviors of CoS_2 can be described better by the LSDA than by the LSDA + U.
△ Less
Submitted 4 January, 2000;
originally announced January 2000.
-
Origin of the giant magnetic moments of Fe impurities on and in Cs films
Authors:
S. K. Kwon,
B. I. Min
Abstract:
To explore the origin of the observed giant magnetic moments ($\sim 7 μ_B$) of Fe impurities on the surface and in the bulk of Cs films, we have performed the relativistic LSDA + U calculations using the linearized muffin-tin orbital (LMTO) band method. We have found that Fe impurities in Cs behave differently from those in noble metals or in Pd. Whereas the induced spin polarization of Cs atoms…
▽ More
To explore the origin of the observed giant magnetic moments ($\sim 7 μ_B$) of Fe impurities on the surface and in the bulk of Cs films, we have performed the relativistic LSDA + U calculations using the linearized muffin-tin orbital (LMTO) band method. We have found that Fe impurities in Cs behave differently from those in noble metals or in Pd. Whereas the induced spin polarization of Cs atoms is negligible, the Fe ion itself is found to be the source of the giant magnetic moment. The 3d electrons of Fe in Cs are localized as the 4f electrons in rare-earth ions so that the orbital magnetic moment becomes as large as the spin magnetic moment. The calculated total magnetic moment of $M = 6.43 μ_B$, which comes mainly from Fe ion, is close to the experimentally observed value.
△ Less
Submitted 3 December, 1999;
originally announced December 1999.