-
Formation of Wind-Fed Black Hole High-mass X-ray Binaries: The Role of Roche-lobe-Overflow Post Black-Hole Formation
Authors:
Zepei Xing,
Tassos Fragos,
Emmanouil Zapartas,
Tom M. Kwan,
Lixin Dai,
Ilya Mandel,
Matthias U. Kruckow,
Max Briel,
Jeff J. Andrews,
Simone S. Bavera,
Seth Gossage,
Konstantinos Kovlakas,
Kyle A. Rocha,
Meng Sun,
Philipp M. Srivastava
Abstract:
The three dynamically confirmed wind-fed black hole high-mass X-ray binaries (BH-HMXBs) are suggested to all contain a highly spinning black hole (BH). However, based on the theories of efficient angular momentum transport inside the stars, we expect that the first-born BHs in binary systems should have low spins, which is consistent with gravitational-wave observations. As a result, the origin of…
▽ More
The three dynamically confirmed wind-fed black hole high-mass X-ray binaries (BH-HMXBs) are suggested to all contain a highly spinning black hole (BH). However, based on the theories of efficient angular momentum transport inside the stars, we expect that the first-born BHs in binary systems should have low spins, which is consistent with gravitational-wave observations. As a result, the origin of the high BH spins measured in wind-fed BH-HMXBs remains a mystery. In this paper, we conduct a binary population synthesis study on wind-fed BH-HMXBs at solar metallicity with the use of the newly developed code POSYDON, considering three scenarios for BH accretion: Eddington-limited, moderately super-Eddington, and fully conservative accretion. Taking into account the conditions for accretion-disk formation, we find that regardless of the accretion model, these systems are more likely to have already experienced a phase of Roche-lobe overflow after the BH formation. To account for the extreme BH spins, highly conservative accretion onto BHs is required, when assuming the accreted material carries the specific angular momentum at the innermost stable orbit. Besides, in our simulations we found that the systems with donor stars within the mass range of $10-20\,M_{\odot}$ are prevalent, posing a challenge in explaining simultaneously all observed properties of the BH-HMXB in our Galaxy, Cygnus X-1, and potentially hinting that the accretion efficiency onto non-degenerate stars, before the formation of the BH, is also more conservative than assumed in our simulations.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
Sub-relativistic Outflow and Hours-Timescale Large-amplitude X-ray Dips during Super-Eddington Accretion onto a Low-mass Massive Black Hole in the Tidal Disruption Event AT2022lri
Authors:
Yuhan Yao,
Muryel Guolo,
Francesco Tombesi,
Ruancun Li,
Suvi Gezari,
Javier A. GarcĂa,
Lixin Dai,
Ryan Chornock,
Wenbin Lu,
S. R. Kulkarni,
Keith C. Gendreau,
Dheeraj R. Pasham,
S. Bradley Cenko,
Erin Kara,
Raffaella Margutti,
Yukta Ajay,
Thomas Wevers,
Tom M. Kwan,
Igor Andreoni,
Joshua S. Bloom,
Andrew J. Drake,
Matthew J. Graham,
Erica Hammerstein,
Russ R. Laher,
Natalie LeBaron
, et al. (10 additional authors not shown)
Abstract:
We present the tidal disruption event (TDE) AT2022lri, hosted in a nearby ($\approx\!144$ Mpc) quiescent galaxy with a low-mass massive black hole ($10^4\,M_\odot < M_{\rm BH} < 10^6\,M_\odot$). AT2022lri belongs to the TDE-H+He subtype. More than 1 Ms of X-ray data were collected with NICER, Swift, and XMM-Newton from 187 d to 672 d after peak. The X-ray luminosity gradually declined from…
▽ More
We present the tidal disruption event (TDE) AT2022lri, hosted in a nearby ($\approx\!144$ Mpc) quiescent galaxy with a low-mass massive black hole ($10^4\,M_\odot < M_{\rm BH} < 10^6\,M_\odot$). AT2022lri belongs to the TDE-H+He subtype. More than 1 Ms of X-ray data were collected with NICER, Swift, and XMM-Newton from 187 d to 672 d after peak. The X-ray luminosity gradually declined from $1.5\times 10^{44}\,{\rm erg\,s^{-1}}$ to $1.5\times 10^{43}\,{\rm erg\,s^{-1}}$ and remains much above the UV and optical luminosity, consistent with a super-Eddington accretion flow viewed face-on. Sporadic strong X-ray dips atop a long-term decline are observed, with variability timescale of $\approx\!0.5$ hr--1 d and amplitude of $\approx\!2$--8. When fitted with simple continuum models, the X-ray spectrum is dominated by a thermal disk component with inner temperature going from $\sim\! 146$ eV to $\sim\! 86$ eV. However, there are residual features that peak around 1 keV, which, in some cases, cannot be reproduced by a single broad emission line. We analyzed a subset of time-resolved spectra with two physically motivated models describing either a scenario where ionized absorbers contribute extra absorption and emission lines or where disk reflection plays an important role. Both models provide good and statistically comparable fits, show that the X-ray dips are correlated with drops in the inner disk temperature, and require the existence of sub-relativistic (0.1--0.3$c$) ionized outflows. We propose that the disk temperature fluctuation stems from episodic drops of the mass accretion rate triggered by magnetic instabilities or/and wobbling of the inner accretion disk along the black hole's spin axis.
△ Less
Submitted 18 May, 2024;
originally announced May 2024.
-
A moving least square immersed boundary method for SPH with thin-walled structures
Authors:
ZhuoLin Wang,
Zichao Jiang,
Yi Zhang,
Gengchao Yang,
Trevor Hocksun Kwan,
Yuhui Chen,
Qinghe Yao
Abstract:
This paper presents a novel method for smoothed particle hydrodynamics (SPH) with thin-walled structures. Inspired by the direct forcing immersed boundary method, this method employs a moving least square method to guarantee the smoothness of velocity near the structure surface. It simplifies thin-walled structure simulations by eliminating the need for multiple layers of boundary particles, and i…
▽ More
This paper presents a novel method for smoothed particle hydrodynamics (SPH) with thin-walled structures. Inspired by the direct forcing immersed boundary method, this method employs a moving least square method to guarantee the smoothness of velocity near the structure surface. It simplifies thin-walled structure simulations by eliminating the need for multiple layers of boundary particles, and improves computational accuracy and stability in three-dimensional scenarios. Supportive three-dimensional numerical results are provided, including the impulsively started plate and the flow past a cylinder. Results of the impulsively started test demonstrate that the proposed method obtains smooth velocity and pressure in the, as well as a good match to the references results of the vortex wake development. In addition, results of the flow past cylinder test show that the proposed method avoids mutual interference on both side of the boundary, remains stable for three-dimensional simulations while accurately calculating the forces acting on structure.
△ Less
Submitted 8 October, 2023; v1 submitted 19 September, 2023;
originally announced September 2023.
-
The Effects of Gas Angular Momentum on the Formation of Magnetically Arrested Disks and the Launching of Powerful Jets
Authors:
Tom M. Kwan,
Lixin Dai,
Alexander Tchekhovskoy
Abstract:
In this letter, we investigate Bondi-like accretion flows with zero or low specific angular momentum by performing 3D general relativistic magnetohydrodynamic simulations. In order to check if relativistic jets can be launched magnetically from such flows, we insert a large-scale poloidal magnetic field into the accretion flow and consider a rapidly spinning black hole. We demonstrate that under s…
▽ More
In this letter, we investigate Bondi-like accretion flows with zero or low specific angular momentum by performing 3D general relativistic magnetohydrodynamic simulations. In order to check if relativistic jets can be launched magnetically from such flows, we insert a large-scale poloidal magnetic field into the accretion flow and consider a rapidly spinning black hole. We demonstrate that under such conditions the accretion flow needs to initially have specific angular momentum above a certain threshold to eventually reach and robustly sustain the magnetically arrested disk state. If the flow can reach such a state, it can launch very powerful jets at $\gtrsim 100\%$ energy efficiency. Interestingly, we also find that even when the accretion flow has initial specific angular momentum below the threshold, it can still launch episodic jets with an average energy efficiency of $\sim 10\%$. However, the accretion flow has nontypical behaviors such as having different rotation directions at different inclinations and exhibiting persistent outflows along the midplane even in the inner disk region. Our results give plausible explanations as to why jets can be produced from various astrophysical systems that likely lack large gas specific angular momenta, such as Sgr A*, wind-fed X-ray binaries, tidal disruption events, and long-duration gamma-ray bursts.
△ Less
Submitted 4 April, 2023; v1 submitted 23 November, 2022;
originally announced November 2022.
-
The properties of wind and jet from a super-Eddington accretion flow around a supermassive black hole
Authors:
Hai Yang,
Feng Yuan,
Tom Kwan,
Lixin Dai
Abstract:
Wind and jet are important medium of AGN feedback thus it is crucial to obtain their properties for the feedback study. In this paper we investigate the properties of wind and jet launched from a magnetized super-Eddington accretion flow around a supermassive black hole. For this aim, we have performed radiation magnetohydrodynamical simulation of a magnetically arrested super-Eddington accretion…
▽ More
Wind and jet are important medium of AGN feedback thus it is crucial to obtain their properties for the feedback study. In this paper we investigate the properties of wind and jet launched from a magnetized super-Eddington accretion flow around a supermassive black hole. For this aim, we have performed radiation magnetohydrodynamical simulation of a magnetically arrested super-Eddington accretion flows. We then have analyzed the simulation data by the ``virtual particle trajectory'' approach and obtained the mass flux, poloidal and toroidal velocities, and mass-flux-weighted momentum and energy fluxes of wind and jet. The mass flux is found to be 2-6 times higher than that obtained based on the time-averaged streamline method widely used in literature. The momentum flux of wind is found to be larger than that of jet, while the total energy flux of jet is at most 3 times larger than that of wind. These results are similar to the case of hot accretion flows and imply that winds likely play a more important role than jet in AGN feedback. The acceleration mechanism of wind and jet is analyzed and found to be dominated by Lorentz force rather than radiation force.
△ Less
Submitted 10 May, 2023; v1 submitted 19 November, 2022;
originally announced November 2022.
-
Dynamical Unification of Tidal Disruption Events
Authors:
Lars Lund Thomsen,
Tom Kwan,
Lixin Dai,
Samantha Wu,
Enrico Ramirez-Ruiz
Abstract:
About a hundred tidal disruption events (TDEs) have been observed and they exhibit a wide range of emission properties both at peak and over their lifetimes. Some TDEs peak predominantly at X-ray energies while others radiate chiefly at UV and optical wavelengths. While the peak luminosities across TDEs show distinct properties, the evolutionary behavior can also vary between TDEs with similar pea…
▽ More
About a hundred tidal disruption events (TDEs) have been observed and they exhibit a wide range of emission properties both at peak and over their lifetimes. Some TDEs peak predominantly at X-ray energies while others radiate chiefly at UV and optical wavelengths. While the peak luminosities across TDEs show distinct properties, the evolutionary behavior can also vary between TDEs with similar peak emission properties. At late time, some optical TDEs rebrighten in X-rays, while others maintain strong UV/optical emission components. In this Letter, we conduct three-dimensional general relativistic radiation magnetohydrodynamics simulations of TDE accretion disks at varying accretion rates ranging from a few to a few tens of the Eddington accretion rate. We make use of Monte Carlo radiative transfer simulations to calculate the reprocessed spectra at various inclinations and at different evolutionary stages. We confirm the unified model proposed by Dai et al. (2018), which predicts that the observed emission largely depends on the viewing angle of the observer with respect to the disk orientation (X-ray strong when viewed face-on and UV/optically strong when viewed disk-on). What is more, we find that disks with higher accretion rates have elevated wind and disk densities, which increases the reprocessing of the high-energy radiation and thus generally augments the optical-to-X-ray flux ratio along a particular viewing angle. This implies that at later times, as the accretion level declines, we expect the funnel to effectively open up and allow more X-rays to leak out along intermediate viewing angles. Such dynamical model for TDEs can provide a natural explanation for the diversity in the emission properties observed in TDEs at peak and along their temporal evolution.
△ Less
Submitted 6 June, 2022;
originally announced June 2022.
-
CoSyR: a novel beam dynamics code for the modeling of synchrotron radiation effects
Authors:
C. -K. Huang,
F. -Y. Li,
H. N. Rakotoarivelo,
B. Shen,
J. Domine,
B. Carlsten,
G. Dilts,
R. Garimella,
T. Kwan,
R. Robey
Abstract:
The self-consistent nonlinear dynamics of a relativistic charged particle beam interacting with its complete self-fields is a fundamental problem underpinning many of the accelerator design issues in high brightness beam applications, as well as the development of advanced accelerators. Particularly, synchrotron radiation induced effects in a magnetic dispersive beamline element can lead to collec…
▽ More
The self-consistent nonlinear dynamics of a relativistic charged particle beam interacting with its complete self-fields is a fundamental problem underpinning many of the accelerator design issues in high brightness beam applications, as well as the development of advanced accelerators. Particularly, synchrotron radiation induced effects in a magnetic dispersive beamline element can lead to collective beam instabilities and emittance growth. A novel beam dynamic code is developed based on a Lagrangian method for the calculation of the particles' radiation near-fields using wavefront/wavelet meshes via the Green's function of the Maxwell equations. These fields are then interpolated onto a moving mesh for dynamic update of the beam. This method allows radiation co-propagation and self-consistent interaction with the beam in the simulation at greatly reduced numerical errors. Multiple levels of parallelisms are inherent in this method and implemented in our code CoSyR to enable at-scale simulations of nonlinear beam dynamics on modern computing platforms using MPI, multi-threading, and GPUs. CoSyR has been used to evaluate the transverse and longitudinal coherent radiation effects on the beam and to investigate beam optics designs proposed for mitigation of beam brightness degradation in a magnetic bunch compressor. In this paper, the design of CoSyR, as well as the benchmark with other coherent synchrotron radiation models, are described and discussed.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Theory of electron transport and emission from a semiconductor nanotip
Authors:
Andrei Piryatinski,
Chengkun Huang,
Thomas J. T. Kwan
Abstract:
An effective mass based model accounting for the conduction band quantization in a high aspect ratio semiconductor nanotip is developed to describe injected electron transport and subsequent electron emission from the nanotip. A transfer matrix formalism is used to treat electron scattering induced by the variation in the tip diameter and the electron emission. Numerical analysis of the scattering…
▽ More
An effective mass based model accounting for the conduction band quantization in a high aspect ratio semiconductor nanotip is developed to describe injected electron transport and subsequent electron emission from the nanotip. A transfer matrix formalism is used to treat electron scattering induced by the variation in the tip diameter and the electron emission. Numerical analysis of the scattering and emission probabilities is performed for the diamond parametrized nanotip model. Our scattering and emission models are further combined with a Monte Carlo (MC) approach to simulate electron transport through the nanotip. The MC simulations, also accounting for the electron-phonon scattering and externally applied electric field, are performed for a minimal nanotip model and an equivalent width diamond slab. An effect of the level quantization, electron scattering due to the nanotip diameter variation, and electron-phonon scattering on the nanotip emission properties is identified and compared with the case of bulk slab.
△ Less
Submitted 15 April, 2019; v1 submitted 8 January, 2019;
originally announced January 2019.
-
Simulation and assessment of ion kinetic effects in a direct-drive capsule implosion experiment
Authors:
Ari Le,
T. J. T. Kwan,
M. J. Schmitt,
H. W. Herrmann,
S. H. Batha
Abstract:
The first simulations employing a kinetic treatment of both fuel and shell ions to model inertial confinement fusion experiments are presented, including results showing the importance of kinetic physics processes in altering fusion burn. A pair of direct drive capsule implosions performed at the OMEGA facility with two different gas fills of deuterium, tritium, and helium-3 are analyzed. During i…
▽ More
The first simulations employing a kinetic treatment of both fuel and shell ions to model inertial confinement fusion experiments are presented, including results showing the importance of kinetic physics processes in altering fusion burn. A pair of direct drive capsule implosions performed at the OMEGA facility with two different gas fills of deuterium, tritium, and helium-3 are analyzed. During implosion shock convergence, highly non-Maxwellian ion velocity distributions and separations in the density and temperature amongst the ion species are observed. Diffusion of fuel into the capsule shell is identified as a principal process that degrades fusion burn performance.
△ Less
Submitted 12 October, 2016;
originally announced October 2016.