-
Integrating Quantum Algorithms Into Classical Frameworks: A Predictor-corrector Approach Using HHL
Authors:
Omer Rathore,
Alastair Basden,
Nicholas Chancellor,
Halim Kusumaatmaja
Abstract:
The application of quantum algorithms to classical problems is generally accompanied by significant bottlenecks when transferring data between quantum and classical states, often negating any intrinsic quantum advantage. Here we address this challenge for a well-known algorithm for linear systems of equations, originally proposed by Harrow, Hassidim and Lloyd (HHL), by adapting it into a predictor…
▽ More
The application of quantum algorithms to classical problems is generally accompanied by significant bottlenecks when transferring data between quantum and classical states, often negating any intrinsic quantum advantage. Here we address this challenge for a well-known algorithm for linear systems of equations, originally proposed by Harrow, Hassidim and Lloyd (HHL), by adapting it into a predictor-corrector instead of a direct solver. Rather than seeking the solution at the next time step, the goal now becomes determining the change between time steps. This strategy enables the intelligent omission of computationally costly steps commonly found in many classical algorithms, while simultaneously mitigating the notorious readout problems associated with extracting solutions from a quantum state. Random or regularly performed skips instead lead to simulation failure. We demonstrate that our methodology secures a useful polynomial advantage over a conventional application of the HHL algorithm. The practicality and versatility of the approach are illustrated through applications in various fields such as smoothed particle hydrodynamics, plasma simulations, and reactive flow configurations. Moreover, the proposed algorithm is well suited to run asynchronously on future heterogeneous hardware infrastructures and can effectively leverage the synergistic strengths of classical as well as quantum compute resources.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Load Balancing For High Performance Computing Using Quantum Annealing
Authors:
Omer Rathore,
Alastair Basden,
Nicholas Chancellor,
Halim Kusumaatmaja
Abstract:
With the advent of exascale computing, effective load balancing in massively parallel software applications is critically important for leveraging the full potential of high performance computing systems. Load balancing is the distribution of computational work between available processors. Here, we investigate the application of quantum annealing to load balance two paradigmatic algorithms in hig…
▽ More
With the advent of exascale computing, effective load balancing in massively parallel software applications is critically important for leveraging the full potential of high performance computing systems. Load balancing is the distribution of computational work between available processors. Here, we investigate the application of quantum annealing to load balance two paradigmatic algorithms in high performance computing. Namely, adaptive mesh refinement and smoothed particle hydrodynamics are chosen as representative grid and off-grid target applications. While the methodology for obtaining real simulation data to partition is application specific, the proposed balancing protocol itself remains completely general. In a grid based context, quantum annealing is found to outperform classical methods such as the round robin protocol but lacks a decisive advantage over more advanced methods such as steepest descent or simulated annealing despite remaining competitive. The primary obstacle to scalability is found to be limited coupling on current quantum annealing hardware. However, for the more complex particle formulation, approached as a multi-objective optimization, quantum annealing solutions are demonstrably Pareto dominant to state of the art classical methods across both objectives. This signals a noteworthy advancement in solution quality which can have a large impact on effective CPU usage.
△ Less
Submitted 8 March, 2024;
originally announced March 2024.
-
OpenLB User Guide: Associated with Release 1.6 of the Code
Authors:
Adrian Kummerländer,
Samuel J. Avis,
Halim Kusumaatmaja,
Fedor Bukreev,
Michael Crocoll,
Davide Dapelo,
Simon Großmann,
Nicolas Hafen,
Shota Ito,
Julius Jeßberger,
Eliane Kummer,
Jan E. Marquardt,
Johanna Mödl,
Tim Pertzel,
František Prinz,
Florian Raichle,
Martin Sadric,
Maximilian Schecher,
Dennis Teutscher,
Stephan Simonis,
Mathias J. Krause
Abstract:
OpenLB is an object-oriented implementation of LBM. It is the first implementation of a generic platform for LBM programming, which is shared with the open source community (GPLv2). Since the first release in 2007, the code has been continuously improved and extended which is documented by thirteen releases as well as the corresponding release notes which are available on the OpenLB website (https…
▽ More
OpenLB is an object-oriented implementation of LBM. It is the first implementation of a generic platform for LBM programming, which is shared with the open source community (GPLv2). Since the first release in 2007, the code has been continuously improved and extended which is documented by thirteen releases as well as the corresponding release notes which are available on the OpenLB website (https://www.openlb.net). The OpenLB code is written in C++ and is used by application programmers as well as developers, with the ability to implement custom models OpenLB supports complex data structures that allow simulations in complex geometries and parallel execution using MPI, OpenMP and CUDA on high-performance computers. The source code uses the concepts of interfaces and templates, so that efficient, direct and intuitive implementations of the LBM become possible. The efficiency and scalability has been checked and proved by code reviews. This user manual and a source code documentation by DoxyGen are available on the OpenLB project website.
△ Less
Submitted 17 May, 2023;
originally announced July 2023.
-
Phase Field Simulation of Liquid Filling on Grooved Surfaces for Complete, Partial and Pseudo-partial Wetting Cases
Authors:
Fandi Oktasendra,
Arben Jusufi,
Andrew R. Konicek,
Mohsen S. Yeganeh,
Jack R. Panter,
Halim Kusumaatmaja
Abstract:
We develop and harness a phase field simulation method to study liquid filling on grooved surfaces. We consider both short-range and long-range liquid-solid interactions, with the latter including purely attractive and repulsive interactions, as well as those with short-range attraction and long-range repulsion. This allows us to capture complete, partial and pseudo-partial wetting states, demonst…
▽ More
We develop and harness a phase field simulation method to study liquid filling on grooved surfaces. We consider both short-range and long-range liquid-solid interactions, with the latter including purely attractive and repulsive interactions, as well as those with short-range attraction and long-range repulsion. This allows us to capture complete, partial and pseudo-partial wetting states, demonstrating complex disjoining pressure profiles over the full range of possible contact angles as previously proposed in the literature. Applying the simulation method to study liquid filling on grooved surfaces, we compare the filling transition for the three different classes of wetting states as we vary the pressure difference between the liquid and gas phases. The filling and emptying transition is reversible for the complete wetting case, while significant hysteresis is observed for the partial and pseudo-partial cases. In agreement with previous studies, we also show that the critical pressure for the filling transition follows the Kelvin equation for the complete and partial wetting scenarios. Finally, we find the filling transition can display a number of distinct morphological pathways for the pseudo-partial wetting cases, as we demonstrate here for varying groove dimensions.
△ Less
Submitted 4 May, 2023;
originally announced May 2023.
-
Three-Dimensional Printed Liquid Diodes with Tunable Velocity: Design Guidelines and Applications for Liquid Collection and Transport
Authors:
Camilla Sammartino,
Michael Rennick,
Halim Kusumaatmaja,
Bat-El Pinchasik
Abstract:
Directional and self-propelled flow in open channels has a variety of applications, including microfluidic and medical devices, industrial filtration processes, fog-harvesting and condensing apparatuses. Here, we present versatile three-dimensional (3D)-printed liquid diodes that enable spontaneous unidirectional flow over long distances for a wide range of liquid contact angles. Typically, we can…
▽ More
Directional and self-propelled flow in open channels has a variety of applications, including microfluidic and medical devices, industrial filtration processes, fog-harvesting and condensing apparatuses. Here, we present versatile three-dimensional (3D)-printed liquid diodes that enable spontaneous unidirectional flow over long distances for a wide range of liquid contact angles. Typically, we can achieve average flow velocities of several millimeters per second over a distance of tens to hundreds of millimeters. The diodes have two key design principles. First, a sudden widening in the channels' width, in combination with a small bump, the pitch, ensure pinning of the liquid in the backward direction. Second, an adjustable reservoir, the bulga, is introduced to manipulate the liquid velocity with differing expansion angles. Using a combination of experiments and lattice Boltzmann simulations, we provide a comprehensive analysis of the flow behavior and speed within the channels with varying contact angles (CA), pitch heights and bulga angles. This provides guidelines for the fabrication of bespoke liquid diodes with optimal design for their potential applications. As a feasibility investigation, we test our design for condensation of water from fog and subsequent transport uphill.
△ Less
Submitted 6 October, 2022;
originally announced October 2022.
-
Modelling the Dynamics of Partially Wetting Droplets on Fibres
Authors:
Raymond Christianto,
Yudi Rahmawan,
Ciro Semprebon,
Halim Kusumaatmaja
Abstract:
We simulate gravity driven dynamics of partially wetting droplets moving along a fibre using the lattice Boltzmann method. For the so-called clamshell morphology, we find three possible dynamic regimes upon varying the droplet Bond number and the fibre radius: compact droplet, droplet breakup and droplet oscillation. For small Bond numbers, in the compact droplet regime, the droplet reaches a stea…
▽ More
We simulate gravity driven dynamics of partially wetting droplets moving along a fibre using the lattice Boltzmann method. For the so-called clamshell morphology, we find three possible dynamic regimes upon varying the droplet Bond number and the fibre radius: compact droplet, droplet breakup and droplet oscillation. For small Bond numbers, in the compact droplet regime, the droplet reaches a steady state and its velocity scales linearly with the driving body force. A similar scaling law can also be observed for the barrel morphology. For higher Bond numbers, in the droplet breakup regime, satellite droplets are formed trailing the initial moving droplet. We find such droplet satellite formation is easier with increasing fibre curvature (smaller fibre radius). Finally, in the droplet oscillation regime, favoured in the mid-range of fibre radius, the droplet shape periodically extends and contracts along the fibre.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
A robust and memory-efficient transition state search method for complex energy landscapes
Authors:
Samuel J. Avis,
Jack R. Panter,
Halim Kusumaatmaja
Abstract:
Locating transition states is crucial for investigating transition mechanisms in wide-ranging phenomena, from atomistic to macroscale systems. Existing methods, however, can struggle in problems with a large number of degrees of freedom, on-the-fly adaptive remeshing and coarse-graining, and energy landscapes that are locally flat or discontinuous. To resolve these challenges, we introduce a new d…
▽ More
Locating transition states is crucial for investigating transition mechanisms in wide-ranging phenomena, from atomistic to macroscale systems. Existing methods, however, can struggle in problems with a large number of degrees of freedom, on-the-fly adaptive remeshing and coarse-graining, and energy landscapes that are locally flat or discontinuous. To resolve these challenges, we introduce a new double-ended method, the Binary-Image Transition State Search (BITSS). It uses just two states that converge to the transition state, resulting in a fast, flexible, and memory-efficient method. We also show it is more robust compared to existing bracketing methods that use only two states. We demonstrate its versatility by applying BITSS to three very different classes of problems: Lennard-Jones clusters, shell buckling, and multiphase phase-field models.
△ Less
Submitted 6 September, 2022;
originally announced September 2022.
-
Spontaneous Phase Separation of Ternary Fluid Mixtures
Authors:
Alvin C. M. Shek,
Halim Kusumaatmaja
Abstract:
We computationally study the spontaneous phase separation of ternary fluid mixtures using the lattice Boltzmann method, both when all the surface tensions are equal and when they have different values. Previous theoretical works typically rely on analysing the sign of the eigenvalues resulting from a simple linear stability analysis, but we find this does not explain the fluid morphologies observe…
▽ More
We computationally study the spontaneous phase separation of ternary fluid mixtures using the lattice Boltzmann method, both when all the surface tensions are equal and when they have different values. Previous theoretical works typically rely on analysing the sign of the eigenvalues resulting from a simple linear stability analysis, but we find this does not explain the fluid morphologies observed. Here, by combining systematic computer simulations over the full range of the composition space and theoretical analysis on the eigenvalues and eigenvectors of the unstable modes, we identify four fundamental phase separation pathways. In particular, we highlight a dominant but so-far overlooked mechanism involving enrichment and instability of the minor component at the fluid-fluid interface
△ Less
Submitted 28 July, 2022; v1 submitted 1 April, 2022;
originally announced April 2022.
-
Apparent Contact Angle of Droplets on Liquid Infused Surfaces: Geometric Interpretation
Authors:
Ciro Semprebon,
Muhammad Subkhi Sadullah,
Glen McHale,
Halim Kusumaatmaja
Abstract:
We theoretically investigate the apparent contact angle of droplets on liquid infused surfaces as a function of the relative size of the wetting ridge and the deposited droplet. We provide an intuitive geometrical interpretation whereby the variation in the apparent contact angle is due to the rotation of the Neumann triangle. We also derive linear and quadratic corrections to the apparent contact…
▽ More
We theoretically investigate the apparent contact angle of droplets on liquid infused surfaces as a function of the relative size of the wetting ridge and the deposited droplet. We provide an intuitive geometrical interpretation whereby the variation in the apparent contact angle is due to the rotation of the Neumann triangle. We also derive linear and quadratic corrections to the apparent contact angle as power series expansion in terms of pressure differences between the lubricant, droplet and gas phases. These expressions are much simpler and more compact compared to those previously derived by Semprebon et al. [Soft Matter, 2017, 13, 101-110].
△ Less
Submitted 11 May, 2021;
originally announced May 2021.
-
Capillary Bridges on Liquid Infused Surfaces
Authors:
Alvin C. M. Shek,
Ciro Semprebon,
Jack R. Panter,
Halim Kusumaatmaja
Abstract:
We numerically study two-component capillary bridges formed when a liquid droplet is placed in between two liquid infused surfaces (LIS). In contrast to commonly studied one-component capillary bridges on non-infused solid surfaces, two-component liquid bridges can exhibit a range of different morphologies where the liquid droplet is directly in contact with two, one or none of the LIS substrates.…
▽ More
We numerically study two-component capillary bridges formed when a liquid droplet is placed in between two liquid infused surfaces (LIS). In contrast to commonly studied one-component capillary bridges on non-infused solid surfaces, two-component liquid bridges can exhibit a range of different morphologies where the liquid droplet is directly in contact with two, one or none of the LIS substrates. In addition, the capillary bridges may lose stability when compressed due to the envelopment of the droplet by the lubricant. We also characterise the capillary force, maximum separation and effective spring force, and find they are influenced by the shape and size of the lubricant ridge. Importantly, these can be tuned to increase the effective capillary adhesion strength by manipulating the lubricant pressure, Neumann angle, and wetting contact angles. As such, LIS are not only "slippery" parallel to the surface, but they are also "sticky" perpendicular to the surface.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Control of superselectivity by crowding in three-dimensional hosts
Authors:
Andrew T. R. Christy,
Halim Kusumaatmaja,
Mark A. Miller
Abstract:
Motivated by the fine compositional control observed in membraneless droplet organelles in cells, we investigate how a sharp binding-unbinding transition can occur between multivalent client molecules and receptors embedded in a porous three-dimensional structure. In contrast to similar superselective binding previously observed at surfaces, we have identified that a key effect in a three-dimensio…
▽ More
Motivated by the fine compositional control observed in membraneless droplet organelles in cells, we investigate how a sharp binding-unbinding transition can occur between multivalent client molecules and receptors embedded in a porous three-dimensional structure. In contrast to similar superselective binding previously observed at surfaces, we have identified that a key effect in a three-dimensional environment is that the presence of inert crowding agents can significantly enhance or even introduce superselectivity. In essence, molecular crowding initially suppresses binding via an entropic penalty, but the clients can then more easily form many bonds simultaneously. We demonstrate the robustness of the superselective behavior with respect to client valency, linker length and binding interactions in Monte Carlo simulations of an archetypal lattice polymer model.
△ Less
Submitted 13 December, 2020;
originally announced December 2020.
-
Phase transitions on non-uniformly curved surfaces: Coupling between phase and location
Authors:
Jack O. Law,
Jacob M. Dean,
Mark A. Miller,
Halim Kusumaatmaja
Abstract:
For particles confined to two dimensions, any curvature of the surface affects the structural, kinetic and thermodynamic properties of the system. If the curvature is non-uniform, an even richer range of behaviours can emerge. Using a combination of bespoke Monte Carlo, molecular dynamics and basin-hop** methods, we show that the stable states of attractive colloids confined to non-uniformly cur…
▽ More
For particles confined to two dimensions, any curvature of the surface affects the structural, kinetic and thermodynamic properties of the system. If the curvature is non-uniform, an even richer range of behaviours can emerge. Using a combination of bespoke Monte Carlo, molecular dynamics and basin-hop** methods, we show that the stable states of attractive colloids confined to non-uniformly curved surfaces are distinguished not only by the phase of matter but also by their location on the surface. Consequently, the transitions between these states involve cooperative migration of the entire colloidal assembly. We demonstrate these phenomena on toroidal and sinusoidal surfaces for model colloids with different ranges of interactions as described by the Morse potential. In all cases, the behaviour can be rationalised in terms of three universal considerations: cluster perimeter, stress, and the packing of next-nearest neighbours.
△ Less
Submitted 6 August, 2020;
originally announced August 2020.
-
Factors Controlling the Pinning Force of Liquid Droplets on Liquid Infused Surfaces
Authors:
Muhammad Subkhi Sadullah,
Jack R. Panter,
Halim Kusumaatmaja
Abstract:
Liquid infused surfaces with partially wetting lubricants have recently been exploited for numerous intriguing applications, such as for droplet manipulation, droplet collection and spontaneous motion. When partially wetting lubricants are used, the pinning force is a key factor that can strongly affect droplet mobility. Here, we derive an analytical prediction for contact angle hysteresis {in the…
▽ More
Liquid infused surfaces with partially wetting lubricants have recently been exploited for numerous intriguing applications, such as for droplet manipulation, droplet collection and spontaneous motion. When partially wetting lubricants are used, the pinning force is a key factor that can strongly affect droplet mobility. Here, we derive an analytical prediction for contact angle hysteresis {in the limit where the meniscus size is much smaller than the droplet}, and numerically study how it is controlled by the solid fraction, the lubricant wetting angles, and the various fluid surface tensions. We further relate the contact angle hysteresis and the pinning force experienced by a droplet on a liquid infused surface, and our predictions for the critical sliding angles are consistent with existing experimental observations. Finally, we discuss why a droplet on a liquid infused surface with partially wetting lubricants typically experiences stronger pinning compared to a droplet on a classical superhydrophobic surface.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Critical pressure asymmetry in the enclosed fluid diode
Authors:
Jack R. Panter,
Yonas Gizaw,
Halim Kusumaatmaja
Abstract:
Joint physically and chemically pattered surfaces can provide efficient and passive manipulation of fluid flow. The ability of many of these surfaces to allow only unidirectional flow mean they are often referred to as fluid diodes. Synthetic analogues of these are enabling technologies from sustainable water collection via fog harvesting, to improved wound dressings. One key fluid diode geometry…
▽ More
Joint physically and chemically pattered surfaces can provide efficient and passive manipulation of fluid flow. The ability of many of these surfaces to allow only unidirectional flow mean they are often referred to as fluid diodes. Synthetic analogues of these are enabling technologies from sustainable water collection via fog harvesting, to improved wound dressings. One key fluid diode geometry features a pore sandwiched between two absorbent substrates, an important design for applications which require liquid capture while preventing back-flow. However, the enclosed pore is particularly challenging to design as an effective fluid diode, due to the need for both a low Laplace pressure for liquid entering the pore, and a high Laplace pressure to liquid leaving. Here, we calculate the Laplace pressure for fluid travelling in both directions on a range of conical pore designs with a chemical gradient. We show that this chemical gradient is in general required to achieve the largest critical pressure differences between incoming and outgoing liquids. Finally, we discuss the optimisation strategy to maximise this critical pressure asymmetry.
△ Less
Submitted 1 June, 2020;
originally announced June 2020.
-
Bidirectional Motion of Droplets on Gradient Liquid Infused Surfaces
Authors:
Muhammad Subkhi Sadullah,
Gaby Launay,
Jayne Parle,
Rodrigo Ledesma-Aguilar,
Yonas Gizaw,
Glen McHale,
Gary Wells,
Halim Kusumaatmaja
Abstract:
We demonstrate spontaneous bidirectional motion of droplets on liquid infused surfaces in the presence of a topographical gradient, in which the droplets can move either toward the denser or the sparser solid fraction area. Our analytical theory explains the origin of this bidirectional motion. Furthermore, using both lattice Boltzmann simulations and experiments, we show that the key factor deter…
▽ More
We demonstrate spontaneous bidirectional motion of droplets on liquid infused surfaces in the presence of a topographical gradient, in which the droplets can move either toward the denser or the sparser solid fraction area. Our analytical theory explains the origin of this bidirectional motion. Furthermore, using both lattice Boltzmann simulations and experiments, we show that the key factor determining the direction of motion is the wettability difference of the droplet on the solid surface and on the lubricant film. The bidirectional motion is shown for various combinations of droplets and lubricants, as well as for different forms of topographical gradients.
△ Less
Submitted 22 April, 2020;
originally announced April 2020.
-
Self-assembly of small molecules at hydrophobic interfaces using group effect
Authors:
William Foster,
Keisuke Miyazawa,
Takeshi Fukuma,
Halim Kusumaatmaja,
Kislon Voitchovsky
Abstract:
Although common in nature, the self-assembly of small molecules at sold-liquid interfaces is difficult to control in artificial systems. The high mobility of dissolved small molecules limits their residence at the interface, typically restricting the self-assembly to systems under confinement or with mobile tethers between the molecules and the surface. Small hydrogen-bonding molecules can overcom…
▽ More
Although common in nature, the self-assembly of small molecules at sold-liquid interfaces is difficult to control in artificial systems. The high mobility of dissolved small molecules limits their residence at the interface, typically restricting the self-assembly to systems under confinement or with mobile tethers between the molecules and the surface. Small hydrogen-bonding molecules can overcome these issues by exploiting group-effect stabilization to achieve non-tethered self-assembly at hydrophobic interfaces. Significantly, the weak molecular interactions with the solid makes it possible to influence the interfacial hydrogen bond network, potentially creating a wide variety of supramolecular structures. Here we investigate the nanoscale details of water and alcohols mixtures self-assembling at the interface with graphite through group effect. We explore the interplay between inter-molecular and surface interactions by adding small amounts of foreign molecules able to interfere with the hydrogen bond network and systematically varying the length of the alcohol hydrocarbon chain. The resulting supramolecular structures forming at room temperature are then examined using atomic force microscopy with insights from computer simulations. We show that the group-based self-assembly approach investigated here is general and can be reproduced on other substrates such as molybdenum disulphide and graphene oxide, potentially making it relevant for a wide variety of systems.
△ Less
Submitted 13 April, 2020;
originally announced April 2020.
-
The Effect of Ageing on the Structure and Properties of Model Liquid Infused Surfaces
Authors:
Sarah J. Goodband,
Steven Armstrong,
Halim Kusumaatmaja,
Kislon Voitchovsky
Abstract:
Liquid infused surfaces (LIS) exhibit unique properties that make them ideal candidates for a wide range of applications, from anti-fouling and anti-icing coatings to self-healing surfaces and controlled wetting. However, when exposed to realistic environmental conditions, LIS tend to age and progressively lose their desirable properties, potentially compromising their application. The associated…
▽ More
Liquid infused surfaces (LIS) exhibit unique properties that make them ideal candidates for a wide range of applications, from anti-fouling and anti-icing coatings to self-healing surfaces and controlled wetting. However, when exposed to realistic environmental conditions, LIS tend to age and progressively lose their desirable properties, potentially compromising their application. The associated ageing mechanisms are still poorly understood, and results reflecting real-life applications are scarce. Here we track the ageing of model LIS composed of glass surfaces functionalized with hydrophobic nanoparticles and infused with silicone oil. The LIS are fully submerged in aqueous solutions and exposed to acoustic pressure waves for set time intervals. The ageing is monitored by periodic measurements of the LIS' wetting properties. We also track changes to the LIS' nanoscale structure. We find that the LIS rapidly lose their slippery properties due to a combination of oil loss, smoothing of the nanoporous functional layer and substrate degradation when directly exposed to the solution. The oil loss is consistent with water microdroplets entering the oil layer and displacing oil away from the surface. These mechanisms are general and could play a role in the ageing of most LIS.
△ Less
Submitted 13 April, 2020;
originally announced April 2020.
-
Axisymmetric flows on the torus geometry
Authors:
Sergiu Busuioc,
Halim Kusumaatmaja,
Victor E. Ambruş
Abstract:
We present a series of analytically solvable axisymmetric flows on the torus geometry. For the single-component flows, we describe the propagation of sound waves for perfect fluids, as well as the viscous dam** of shear and longitudinal waves for isothermal and thermal fluids. Unlike the case of planar geometry, the non-uniform curvature on a torus necessitates a distinct spectrum of eigenfreque…
▽ More
We present a series of analytically solvable axisymmetric flows on the torus geometry. For the single-component flows, we describe the propagation of sound waves for perfect fluids, as well as the viscous dam** of shear and longitudinal waves for isothermal and thermal fluids. Unlike the case of planar geometry, the non-uniform curvature on a torus necessitates a distinct spectrum of eigenfrequencies and their corresponding basis functions. This has several interesting consequences, including breaking the degeneracy between even and odd modes, a lack of periodicity even in the flows of perfect fluids and the loss of Galilean invariance for flows with velocity components in the poloidal direction. For the multi-component flows, we study the equilibrium configurations and relaxation dynamics of axisymmetric fluid stripes, described using the Cahn-Hilliard equation. We find a second-order phase transition in the equilibrium location of the stripe as a function of its area $ΔA$. This phase transition leads to a complex dependence of the Laplace pressure on $ΔA$. We also derive the underdamped oscillatory dynamics as the stripes approach equilibrium. Furthermore, relaxing the assumption of axial symmetry, we derive the conditions under which the stripes become unstable. In all cases, the analytical results are confirmed numerically using a finite-difference Navier-Stokes solver.
△ Less
Submitted 28 July, 2020; v1 submitted 14 November, 2019;
originally announced November 2019.
-
Harnessing energy landscape exploration to control the buckling of cylindrical shells
Authors:
Jack Panter,
Junbo Chen,
Teng Zhang,
Halim Kusumaatmaja
Abstract:
The complexity and unpredictability of postbuckling responses in even simple thin shells have raised great challenges to emerging technologies exploiting buckling transitions. Here we comprehensively survey the buckling landscapes to show the full complexity of the stable buckling states and the transition mechanisms between each of them. This is achieved by combining a simple and versatile triang…
▽ More
The complexity and unpredictability of postbuckling responses in even simple thin shells have raised great challenges to emerging technologies exploiting buckling transitions. Here we comprehensively survey the buckling landscapes to show the full complexity of the stable buckling states and the transition mechanisms between each of them. This is achieved by combining a simple and versatile triangulated lattice model for modelling the shell morphologies with efficient high-dimensional free-energy minimisation and transition path finding algorithms. We show how the simple free energy landscapes of short, lightly compressed cylinders become vastly more complex at high compressive strains or aspect ratios. We then exploit these landscapes to introduce an effective method for targeted design - landscape biasing. This is used to inform thickness modifications enabling landscape redesign, and the development of structures which are highly resistant to lateral perturbations. Our methods are general, and can be extended to studying postbuckling responses of other geometries.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Morphological analysis of chiral rod clusters from a coarse-grained single-site chiral potential
Authors:
B. J. Sutherland,
S. W. Olesen,
H. Kusumaatmaja,
J. W. R. Morgan,
D. J. Wales
Abstract:
We present a coarse-grained single-site potential for simulating chiral interactions, with adjustable strength, handedness, and preferred twist angle. As an application, we perform basin-hop** global optimisation to predict the favoured geometries for clusters of chiral rods. The morphology phase diagram based upon these predictions has four distinct families, including previously reported struc…
▽ More
We present a coarse-grained single-site potential for simulating chiral interactions, with adjustable strength, handedness, and preferred twist angle. As an application, we perform basin-hop** global optimisation to predict the favoured geometries for clusters of chiral rods. The morphology phase diagram based upon these predictions has four distinct families, including previously reported structures for potentials that introduce chirality based on shape, such as membranes and helices. The transition between these two configurations reproduces some key features of experimental results for {\it{fd}} bacteriophage. The potential is computationally inexpensive, intuitive, and versatile; we expect it will be useful for large scale simulations of chiral molecules. For chiral particles confined in a cylindrical container we reproduce the behaviour observed for fusilli pasta in a jar. Hence this chiropole potential has the capability to provide insight into structures on both macroscopic and molecular length scales.
△ Less
Submitted 1 October, 2019;
originally announced October 2019.
-
Self-Propelled Droplet Transport on Shaped-Liquid Surfaces
Authors:
Gaby Launay,
Muhammad Subkhi Sadullah,
Glen McHale,
Rodrigo Ledesma-Aguilar,
Halim Kusumaatmaja,
Gary G. Wells
Abstract:
The transport of small quantities of liquid on a solid surface is inhibited by the resistance to motion caused by the contact between the liquid and the solid. To overcome such resistance, motion can be externally driven through gradients in electric fields, but these all inconveniently involve the input of external energy. Alternatively, gradients in physical shape and wettability - the conical s…
▽ More
The transport of small quantities of liquid on a solid surface is inhibited by the resistance to motion caused by the contact between the liquid and the solid. To overcome such resistance, motion can be externally driven through gradients in electric fields, but these all inconveniently involve the input of external energy. Alternatively, gradients in physical shape and wettability - the conical shape of cactus spines to create self-propelled motion. However, such self-propelled motion to date has limited success in overcoming the inherent resistance to motion of the liquid contact with the solid. Here we propose a simple solution in the form of shaped-liquid surface, where solid topographic structures at one length scale provides the base for a smaller length-scale liquid conformal layer. This dual-length scale render possible slippery surfaces with superhydrophobic properties. Combined to an heterogeneous topography, it provides a gradient in liquid-on-liquid wettability with minimal resistance to motion and long range directional self-propelled droplet transport. Moreover, the liquid-liquid contact enables impacting droplets to be captured and transported, even when the substrate is inverted. These design principles are highly beneficial for droplet transport in microfluidics, self-cleaning surfaces, fog harvesting and in heat transfer.
△ Less
Submitted 4 August, 2019;
originally announced August 2019.
-
Modelling ternary fluids in contact with elastic membranes
Authors:
Marianna Pepona,
Alvin C. M. Shek,
Ciro Semprebon,
Timm Krüger,
Halim Kusumaatmaja
Abstract:
We present a thermodynamically consistent model of a ternary fluid interacting with elastic membranes. Following a free-energy modelling approach and taking into account the thermodynamics laws, we derive the equations governing the ternary fluid flow and dynamics of the membranes. We also provide the numerical framework for simulating such fluid-structure interaction problems. It is based on the…
▽ More
We present a thermodynamically consistent model of a ternary fluid interacting with elastic membranes. Following a free-energy modelling approach and taking into account the thermodynamics laws, we derive the equations governing the ternary fluid flow and dynamics of the membranes. We also provide the numerical framework for simulating such fluid-structure interaction problems. It is based on the lattice Boltzmann method, employed for resolving the evolution equations of the ternary fluid in an Eulerian description, coupled to the immersed boundary method, allowing for the membrane equations of motion to be solved in a Lagrangian system. The configuration of an elastic capsule placed at a fluid-fluid interface is considered for validation purposes. Systematic simulations are performed for a detailed comparison with reference numerical results obtained by Surface Evolver, and the Galilean invariance of the proposed model is also proven. The proposed approach is versatile, and a wide range of geometries can be simulated. To demonstrate this, the problem of a capillary bridge formed between two deformable capsules is investigated here.
△ Less
Submitted 28 May, 2019;
originally announced June 2019.
-
Modelling double emulsion formation in planar flow-focusing microchannels
Authors:
Ningning Wang,
Ciro Semprebon,
Haihu Liu,
Chuhua Zhang,
Halim Kusumaatmaja
Abstract:
Double emulsion formation in a hierarchical flow-focusing channel is systematically investigated using a free energy ternary lattice Boltzmann model. A three dimensional formation regime diagram is constructed based on the capillary numbers of the inner ($Ca_i$), middle ($Ca_m$) and outer ($Ca_o$) phase fluids. The results show that the formation diagram can be classified into periodic two-step re…
▽ More
Double emulsion formation in a hierarchical flow-focusing channel is systematically investigated using a free energy ternary lattice Boltzmann model. A three dimensional formation regime diagram is constructed based on the capillary numbers of the inner ($Ca_i$), middle ($Ca_m$) and outer ($Ca_o$) phase fluids. The results show that the formation diagram can be classified into periodic two-step region, periodic one-step region, and non-periodic region. By varying $Ca_i$ and $Ca_m$ in the two-step formation region, different morphologies are obtained, including the regular double emulsions, decussate regimes with one or two alternate empty droplets, and structures with multiple inner droplets contained in the continuous middle phase thread. Bidisperse behaviors are also frequently encountered in the two-step formation region. In the periodic one-step formation region, scaling laws are proposed for the double emulsion size and for the size ratio between the inner droplet and the overall double emulsion. Furthermore, we show that the interfacial tension ratio can greatly change the morphologies of the obtained emulsion droplets, and the channel geometry plays an important role in changing the formation regimes and the double emulsion sizes. In particular, narrowing the side inlets or the distance between the two side inlets promotes the conversion from the two-step formation regime to the one-step formation regime.
△ Less
Submitted 13 April, 2020; v1 submitted 3 June, 2019;
originally announced June 2019.
-
Multicomponent Flow on Curved Surfaces: A Vielbein Lattice Boltzmann Approach
Authors:
Victor E. Ambruş,
Sergiu Busuioc,
Alexander J. Wagner,
Fabien Paillusson,
Halim Kusumaatmaja
Abstract:
We develop and implement a novel lattice Boltzmann scheme to study multicomponent flows on curved surfaces, coupling the continuity and Navier-Stokes equations with the Cahn-Hilliard equation to track the evolution of the binary fluid interfaces. Standard lattice Boltzmann method relies on regular Cartesian grids, which makes it generally unsuitable to study flow problems on curved surfaces. To al…
▽ More
We develop and implement a novel lattice Boltzmann scheme to study multicomponent flows on curved surfaces, coupling the continuity and Navier-Stokes equations with the Cahn-Hilliard equation to track the evolution of the binary fluid interfaces. Standard lattice Boltzmann method relies on regular Cartesian grids, which makes it generally unsuitable to study flow problems on curved surfaces. To alleviate this limitation, we use a vielbein formalism to write down the Boltzmann equation on an arbitrary geometry, and solve the evolution of the fluid distribution functions using a finite difference method. Focussing on the torus geometry as an example of a curved surface, we demonstrate drift motions of fluid droplets and stripes embedded on the surface of a torus. Interestingly, they migrate in opposite directions: fluid droplets to the outer side while fluid stripes to the inner side of the torus. For the latter we demonstrate that the global minimum configuration is unique for small stripe widths, but it becomes bistable for large stripe widths. Our simulations are also in agreement with analytical predictions for the Laplace pressure of the fluid stripes, and their damped oscillatory motion as they approach equilibrium configurations, capturing the corresponding decay timescale and oscillation frequency. Finally, we simulate the coarsening dynamics of phase separating binary fluids in the hydrodynamics and diffusive regimes for tori of various shapes, and compare the results against those for a flat two-dimensional surface. Our lattice Boltzmann scheme can be extended to other surfaces and coupled to other dynamical equations, opening up a vast range of applications involving complex flows on curved geometries.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
Wetting boundaries for ternary high density ratio Lattice Boltzmann Method
Authors:
Neeru Bala,
Marianna Pepona,
Ilya Karlin,
Halim Kusumaatmaja,
Ciro Semprebon
Abstract:
We extend a recently proposed ternary free energy lattice Boltzmann model with high density contrast, by incorporating wetting boundaries at solid walls. The approaches are based on forcing and geometric schemes, with implementations optimised for ternary (and more generally higher order multicomponent) models. Advantages and disadvantages of each method are addressed by performing both static and…
▽ More
We extend a recently proposed ternary free energy lattice Boltzmann model with high density contrast, by incorporating wetting boundaries at solid walls. The approaches are based on forcing and geometric schemes, with implementations optimised for ternary (and more generally higher order multicomponent) models. Advantages and disadvantages of each method are addressed by performing both static and dynamic tests, including the capillary filling dynamics of a liquid displacing the gas phase, and the self-propelled motion of a train of drops. Furthermore, we measure dynamic angles and show that the slip length critically depends on the equilibrium value of the contact angles, and whether it belongs to liquid-liquid or liquid-gas interfaces. These results validate the model capabilities of simulating complex ternary fluid dynamic problems near solid boundaries, for example drop impact solid substrates covered by a lubricant layer.
△ Less
Submitted 15 April, 2019;
originally announced April 2019.
-
Multifaceted design optimisation for superomniphobic surfaces
Authors:
Jack Panter,
Yonas Gizaw,
Halim Kusumaatmaja
Abstract:
Superomniphobic textures are at the frontier of surface design for vast arrays of applications. Despite recent significant advances in fabrication methods for reentrant and doubly reentrant microstructures, design optimisation remains a major challenge. We overcome this in two stages. Firstly, we develop readily-generalisable computational methods to systematically survey three key wetting propert…
▽ More
Superomniphobic textures are at the frontier of surface design for vast arrays of applications. Despite recent significant advances in fabrication methods for reentrant and doubly reentrant microstructures, design optimisation remains a major challenge. We overcome this in two stages. Firstly, we develop readily-generalisable computational methods to systematically survey three key wetting properties: contact angle hysteresis, critical pressure, and minimum energy wetting barrier. For each, we uncover multiple competing mechanisms, leading to the development of new quantitative models, and correction of inaccurate assumptions in prevailing models. Secondly, we combine these analyses simultaneously, demonstrating the power of this strategy by optimizing structures that are well-suited to overcome challenges faced by two emerging applications: membrane distillation and digital microfluidics. As the wetting properties are antagonistically coupled, this multifaceted approach is essential for optimal design. When large surveys are impractical, we show that genetic algorithms enable efficient optimisation, offering speedups of up to 10,000x.
△ Less
Submitted 10 April, 2019;
originally announced April 2019.
-
Measuring Bilayer Surface Energy and Curvature in Asymmetric Droplet Interface Bilayers
Authors:
Nathan E. Barlow,
Halim Kusumaatmaja,
Ali Salehi-Reyhani,
Nick Brooks,
Laura M. C. Barter,
Anthony J. Flemming,
Oscar Ces
Abstract:
For the past decade, droplet interface bilayers (DIBs) have had an increased prevalence in biomolecular and biophysical literature. However, much of the underlying physics of these platforms are poorly characterized. To further the understanding of these structures, a study of lipid membrane tension on DIB membranes is measured by analysing the equilibrium shape of asymmetric DIBs. To this end, th…
▽ More
For the past decade, droplet interface bilayers (DIBs) have had an increased prevalence in biomolecular and biophysical literature. However, much of the underlying physics of these platforms are poorly characterized. To further the understanding of these structures, a study of lipid membrane tension on DIB membranes is measured by analysing the equilibrium shape of asymmetric DIBs. To this end, the morphology of DIBs is explored for the first time using confocal laser scanning fluorescence microscopy (CLSM). The experimental results confirm that, in accordance with theory, the bilayer interface of a volume asymmetric DIB is curved toward the smaller droplet and a lipid asymmetric DIB is curved toward the droplet with the higher monolayer surface tension. Moreover, the DIB shape can be exploited to measure complex bilayer surface energies. In this study, the bilayer surface energy of DIBs composed of lipid mixtures of phosphatidylgylcerol (PG) and phosphatidylcholine (PC) are shown to increase linearly with PG concentrations up to 25%. The assumption that DIB bilayer area can be geometrically approximated as a spherical cap base is also tested, and it is discovered that the bilayer curvature is negligible for most practical symmetric or asymmetric DIB systems with respect to bilayer area.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
In-situ molecular-level observation of methanol catalysis at the water-graphite interface
Authors:
William Foster,
Juan A. Aguilar,
Halim Kusumaatmaja,
Kislon Voïtchovsky
Abstract:
Methanol occupies a central role in chemical synthesis and is considered an ideal candidate for cleaner fuel storage and transportation. It can be catalyzed from water and volatile organic compounds such as carbon dioxide, thereby offering an attractive solution for reducing carbon emissions. However molecular-level experimental observations of the catalytic process are scarce, and most existing c…
▽ More
Methanol occupies a central role in chemical synthesis and is considered an ideal candidate for cleaner fuel storage and transportation. It can be catalyzed from water and volatile organic compounds such as carbon dioxide, thereby offering an attractive solution for reducing carbon emissions. However molecular-level experimental observations of the catalytic process are scarce, and most existing catalysts tend to rely on empirically optimized, expensive and complex nano- composite materials. This lack of molecular-level insights has precluded the development of simpler, more cost-effective alternatives. Here we show that graphite immersed in ultrapure water is able to spontaneously catalyze methanol from volatile organic compounds in ambient conditions. Using single-molecule resolution atomic force microscopy (AFM) in liquid, we directly observe the formation and evolution of methanol-water nanostructures at the surface of graphite. These molecularly ordered structures nucleate near catalytically active surface features such as atomic step edges and grow progressively as further methanol is being catalyzed. Complementary nuclear magnetic resonance analysis of the liquid confirms the formation of methanol and quantifies its concentration. We also show that electric fields significantly enhance the catalysis rate, even when as small as that induced by the natural surface potential of the silicon AFM tip. These findings could have a significant impact on the development of organic catalysts and on the function of nanoscale carbon devices.
△ Less
Submitted 17 September, 2018;
originally announced September 2018.
-
Dynamic Morphologies and Stability of Droplet Interface Bilayers
Authors:
Benjamin Guiselin,
Jack O. Law,
Buddhapriya Chakrabarti,
Halim Kusumaatmaja
Abstract:
We develop a theoretical framework for understanding dynamic morphologies and stability of droplet interface bilayers (DIBs), accounting for lipid kinetics in the monolayers and bilayer, and droplet evaporation due to imbalance between osmotic and Laplace pressures. Our theory quantitatively describes distinct pathways observed in experiments when DIBs become unstable. We find that when the timesc…
▽ More
We develop a theoretical framework for understanding dynamic morphologies and stability of droplet interface bilayers (DIBs), accounting for lipid kinetics in the monolayers and bilayer, and droplet evaporation due to imbalance between osmotic and Laplace pressures. Our theory quantitatively describes distinct pathways observed in experiments when DIBs become unstable. We find that when the timescale for lipid desorption is slow compared to droplet evaporation, the lipid bilayer will grow and the droplets approach a hemispherical shape. In contrast, when lipid desorption is fast, the bilayer area will shrink and the droplets eventually detach. Our model also suggests there is a critical size below which DIBs cannot be stable, which may explain experimental difficulties in miniaturising the DIB platform.
△ Less
Submitted 11 May, 2018; v1 submitted 22 March, 2018;
originally announced March 2018.
-
Drop dynamics on Liquid Infused Surfaces: The Role of the Wetting Ridge
Authors:
Muhammad Subkhi Sadullah,
Ciro Semprebon,
Halim Kusumaatmaja
Abstract:
We employ a free energy lattice Boltzmann method to study the dynamics of a ternary fluid system consisting of a liquid drop driven by a body force across a regularly textured substrate, infused by a lubricating liquid. We focus on the case of partial wetting lubricants and observe a rich interplay between contact line pinning and viscous dissipation at the lubricant ridge, which become dominant a…
▽ More
We employ a free energy lattice Boltzmann method to study the dynamics of a ternary fluid system consisting of a liquid drop driven by a body force across a regularly textured substrate, infused by a lubricating liquid. We focus on the case of partial wetting lubricants and observe a rich interplay between contact line pinning and viscous dissipation at the lubricant ridge, which become dominant at large and small apparent angles respectively. Our numerical investigations further demonstrate that the relative importance of viscous dissipation at the lubricant ridge depends on the drop to lubricant viscosity ratio, as well as on the shape of the wetting ridge.
△ Less
Submitted 18 May, 2018; v1 submitted 11 March, 2018;
originally announced March 2018.
-
Ternary free-energy entropic lattice Boltzmann model with high density ratio
Authors:
Moritz Wöhrwag,
Ciro Semprebon,
Ali Mazloomi Moqaddam,
Ilya Karlin,
Halim Kusumaatmaja
Abstract:
A rigorous free energy model for ternary fluid flows with density ratio up to of order $O(10^3)$ is presented and implemented using the entropic lattice Boltzmann scheme. The model is thermodynamically consistent and allows a broad range of surface tension ratios, covering both partial wetting states where Neumann triangles are formed, and full wetting states where complete encapsulation of one of…
▽ More
A rigorous free energy model for ternary fluid flows with density ratio up to of order $O(10^3)$ is presented and implemented using the entropic lattice Boltzmann scheme. The model is thermodynamically consistent and allows a broad range of surface tension ratios, covering both partial wetting states where Neumann triangles are formed, and full wetting states where complete encapsulation of one of fluid components is observed. We further demonstrate that we can capture the bouncing, adhesive and insertive regimes for the binary collisions between immiscible droplets suspended in air. Our approach opens up a vast range of multiphase flow applications involving one gas and several liquid components.
△ Less
Submitted 11 May, 2018; v1 submitted 20 October, 2017;
originally announced October 2017.
-
On The Critical Casimir Interaction Between Anisotropic Inclusions On A Membrane
Authors:
Jorge Benet,
Fabien Paillusson,
Halim Kusumaatmaja
Abstract:
Using a lattice model and a versatile thermodynamic integration scheme, we study the critical Casimir interactions between inclusions embedded in a two-dimensional critical binary mixtures. For single-domain inclusions we demonstrate that the interactions are very long range, and their magnitudes strongly depend on the affinity of the inclusions with the species in the binary mixtures, ranging fro…
▽ More
Using a lattice model and a versatile thermodynamic integration scheme, we study the critical Casimir interactions between inclusions embedded in a two-dimensional critical binary mixtures. For single-domain inclusions we demonstrate that the interactions are very long range, and their magnitudes strongly depend on the affinity of the inclusions with the species in the binary mixtures, ranging from repulsive when two inclusions have opposing affinities to attractive when they have the same affinities. When one of the inclusions has no preference for either of the species, we find negligible critical Casimir interactions. For multiple-domain inclusions, mimicking the observations that membrane proteins often have several domains with varying affinities to the surrounding lipid species, the presence of domains with opposing affinities does not cancel the interactions altogether. Instead we can observe both attractive and repulsive interactions depending on their relative orientations. With increasing number of domains per inclusion, the range and magnitude of the effective interactions decrease in a similar fashion to those of electrostatic multipoles. Finally, clusters formed by multiple-domain inclusions can result in an effective affinity patterning due to the anisotropic character of the Casimir interactions between the building blocks.
△ Less
Submitted 10 August, 2017; v1 submitted 3 June, 2017;
originally announced June 2017.
-
Edge fracture in complex fluids
Authors:
Ewan J. Hemingway,
Halim Kusumaatmaja,
Suzanne M. Fielding
Abstract:
We study theoretically the edge fracture instability in sheared complex fluids, by means of linear stability analysis and direct nonlinear simulations. We derive an exact analytical expression for the onset of edge fracture in terms of the shear-rate derivative of the fluid's second normal stress difference, the shear-rate derivative of the shear stress, the jump in shear stress across the interfa…
▽ More
We study theoretically the edge fracture instability in sheared complex fluids, by means of linear stability analysis and direct nonlinear simulations. We derive an exact analytical expression for the onset of edge fracture in terms of the shear-rate derivative of the fluid's second normal stress difference, the shear-rate derivative of the shear stress, the jump in shear stress across the interface between the fluid and the outside medium (usually air), the surface tension of that interface, and the rheometer gap size. We provide a full mechanistic understanding of the edge fracture instability, carefully validated against our simulations. These findings, which are robust with respect to choice of rheological constitutive model, also suggest a possible route to mitigating edge fracture, potentially allowing experimentalists to achieve and accurately measure stronger flows than hitherto.
△ Less
Submitted 17 July, 2017; v1 submitted 15 March, 2017;
originally announced March 2017.
-
The Impact of Surface Geometry, Cavitation, and Condensation on Wetting Transitions: Posts and Reentrant Structures
Authors:
Jack R. Panter,
Halim Kusumaatmaja
Abstract:
The fundamental impacts of surface geometry on the stability of wetting states, and the transitions between them are elucidated for posts and reentrant structures in both two and three dimensions. We identify three principal outcomes of particular importance for future surface design of liquid-repellent surfaces. Firstly, we demonstrate and quantify how capillary condensation and vapour cavitation…
▽ More
The fundamental impacts of surface geometry on the stability of wetting states, and the transitions between them are elucidated for posts and reentrant structures in both two and three dimensions. We identify three principal outcomes of particular importance for future surface design of liquid-repellent surfaces. Firstly, we demonstrate and quantify how capillary condensation and vapour cavitation affect wetting state stabilities, and the roles condensates play in wetting transitions. Crucially, this leads to a description of the surface structures which exhibit a suspended state in the absence of a collapsed state. Secondly, two distinct collapse mechanisms are observed for 3D reentrant geometries, Base Contact and Pillar Contact, which are operative at different pillar heights. As well as morphological differences in the penetrating liquid, each mechanism is affected differently by changes in the contact angle with the solid. Finally, symmetry breaking is shown to be prevalent in 2D systems, but absent in the 3D equivalents. For the 2D reentrant geometries, three pillar heigh-dependent collapse mechanisms are shown: asymmetric Pillar Contact and Base Contact, and a third hybrid mode.
△ Less
Submitted 1 September, 2016;
originally announced September 2016.
-
Kinetic Transition Networks for the Thomson Problem and Smale's 7th Problem
Authors:
Dhagash Mehta,
Jianxu Chen,
Danny Z. Chen,
Halim Kusumaatmaja,
David J. Wales
Abstract:
The Thomson Problem, arrangement of identical charges on the surface of a sphere, has found many applications in physics, chemistry and biology. Here we show that the energy landscape of the Thomson Problem for $N$ particles with $N=132, 135, 138, 141, 144, 147$ and $150$ is single funnelled, characteristic of a structure-seeking organisation where the global minimum is easily accessible. Algorith…
▽ More
The Thomson Problem, arrangement of identical charges on the surface of a sphere, has found many applications in physics, chemistry and biology. Here we show that the energy landscape of the Thomson Problem for $N$ particles with $N=132, 135, 138, 141, 144, 147$ and $150$ is single funnelled, characteristic of a structure-seeking organisation where the global minimum is easily accessible. Algorithmically constructing starting points close to the global minimum of such a potential with spherical constraints is one of Smale's 18 unsolved problems in mathematics for the 21st century because it is important in the solution of univariate and bivariate random polynomial equations. By analysing the kinetic transition networks, we show that a randomly chosen minimum is in fact always `close' to the global minimum in terms of the number of transition states that separate them, a characteristic of small world networks.
△ Less
Submitted 8 June, 2016; v1 submitted 26 May, 2016;
originally announced May 2016.
-
Apparent Contact Angle and Contact Angle Hysteresis on Liquid Infused Surfaces
Authors:
Ciro Semprebon,
Glen McHale,
Halim Kusumaatmaja
Abstract:
We theoretically investigate the apparent contact angle and contact angle hysteresis of a droplet placed on a liquid infused surface. We show that the apparent contact angle is not uniquely defined by material parameters, but also has a strong dependence on the relative size between the droplet and its surrounding wetting ridge formed by the infusing liquid. We derive a closed form expression for…
▽ More
We theoretically investigate the apparent contact angle and contact angle hysteresis of a droplet placed on a liquid infused surface. We show that the apparent contact angle is not uniquely defined by material parameters, but also has a strong dependence on the relative size between the droplet and its surrounding wetting ridge formed by the infusing liquid. We derive a closed form expression for the contact angle in the limit of vanishing wetting ridge, and compute the correction for small but finite ridge, which corresponds to an effective line tension term. We also predict contact angle hysteresis on liquid infused surfaces generated by the pinning of the contact lines by the surface corrugations. Our analytical expressions for both the apparent contact angle and contact angle hysteresis can be interpreted as `weighted sums' between the contact angles of the infusing liquid relative to the droplet and surrounding gas phases, where the weighting coefficients are given by ratios of the fluid surface tensions.
△ Less
Submitted 23 May, 2016; v1 submitted 18 April, 2016;
originally announced April 2016.
-
Energetically favoured defects in dense packings of particles on spherical surfaces
Authors:
Stefan Paquay,
Halim Kusumaatmaja,
David J. Wales,
Roya Zandi,
Paul van der Schoot
Abstract:
The dense packing of interacting particles on spheres has proved to be a useful model for virus capsids and colloidosomes. Indeed, icosahedral symmetry observed in virus capsids corresponds to potential energy minima that occur for magic numbers of, e.g., 12, 32 and 72 identical Lennard-Jones particles, for which the packing has exactly the minimum number of twelve five-fold defects. It is unclear…
▽ More
The dense packing of interacting particles on spheres has proved to be a useful model for virus capsids and colloidosomes. Indeed, icosahedral symmetry observed in virus capsids corresponds to potential energy minima that occur for magic numbers of, e.g., 12, 32 and 72 identical Lennard-Jones particles, for which the packing has exactly the minimum number of twelve five-fold defects. It is unclear, however, how stable these structures are against thermal agitation. We investigate this property by means of basin-hop** global optimisation and Langevin dynamics for particle numbers between ten and one hundred. An important measure is the number and type of point defects, that is, particles that do not have six nearest neighbours. We find that small icosahedral structures are the most robust against thermal fluctuations, exhibiting fewer excess defects and rearrangements for a wide temperature range. Furthermore, we provide evidence that excess defects appearing at low non-zero temperatures lower the potential energy at the expense of entropy. At higher temperatures defects are, as expected, thermally excited and thus entropically stabilised. If we replace the Lennard-Jones potential by a very short-ranged (Morse) potential, which is arguably more appropriate for colloids and virus capsid proteins, we find that the same particle numbers give a minimum in the potential energy, although for larger particle numbers these minima correspond to different packings. Furthermore, defects are more difficult to excite thermally for the short-ranged potential, suggesting that the short-ranged interaction further stabilises equilibrium structures.
△ Less
Submitted 28 February, 2017; v1 submitted 25 February, 2016;
originally announced February 2016.
-
Ternary Free Energy Lattice Boltzmann Model with Tunable Surface Tensions and Contact Angles
Authors:
Ciro Semprebon,
Timm Krüger,
Halim Kusumaatmaja
Abstract:
We present a new ternary free energy lattice Boltzmann model. The distinguishing feature of our model is that we are able to analytically derive and independently vary all fluid-fluid surface tensions and the solid surface contact angles. We carry out a number of benchmark tests: (i) double emulsions and liquid lenses to validate the surface tensions, (ii) ternary fluids in contact with a square w…
▽ More
We present a new ternary free energy lattice Boltzmann model. The distinguishing feature of our model is that we are able to analytically derive and independently vary all fluid-fluid surface tensions and the solid surface contact angles. We carry out a number of benchmark tests: (i) double emulsions and liquid lenses to validate the surface tensions, (ii) ternary fluids in contact with a square well to compare the contact angles against analytical predictions, and (iii) ternary phase separation to verify that the multicomponent fluid dynamics is accurately captured. Additionally we also describe how the model here presented here can be extended to include an arbitrary number of fluid components.
△ Less
Submitted 19 February, 2016; v1 submitted 6 November, 2015;
originally announced November 2015.
-
Phase Separation on Bicontinuous Cubic Membranes: Symmetry Breaking, Re-entrant and Domain Facetting
Authors:
Fabien Paillusson,
Matthew R. Pennington,
Halim Kusumaatmaja
Abstract:
We study the phase separation of binary lipid mixtures that form bicontinuous cubic phases. The competition between non-uniform Gaussian membrane curvature and line tension leads to a very rich phase diagram, where we observe symmetry breaking of the membrane morphologies and reentrant phenomena due to the formation of bridges between segregated domains. Upon increasing the line tension contributi…
▽ More
We study the phase separation of binary lipid mixtures that form bicontinuous cubic phases. The competition between non-uniform Gaussian membrane curvature and line tension leads to a very rich phase diagram, where we observe symmetry breaking of the membrane morphologies and reentrant phenomena due to the formation of bridges between segregated domains. Upon increasing the line tension contribution, we also find facetting of lipid domains that we explain using a simple argument based on the symmetry of the underlying surface and topology.
△ Less
Submitted 4 July, 2016; v1 submitted 30 October, 2015;
originally announced October 2015.
-
Moving contact line dynamics: from diffuse to sharp interfaces
Authors:
Halim Kusumaatmaja,
Ewan J. Hemingway,
Suzanne M. Fielding
Abstract:
We reconcile two scaling laws that have been proposed in the literature for the slip length associated with a moving contact line in diffuse interface models, by demonstrating each to apply in a different regime of the ratio of the microscopic interfacial width $l$ and the macroscopic diffusive length $l_D= (Mη)^{1/2}$, where $η$ is the fluid viscosity and $M$ the mobility governing intermolecular…
▽ More
We reconcile two scaling laws that have been proposed in the literature for the slip length associated with a moving contact line in diffuse interface models, by demonstrating each to apply in a different regime of the ratio of the microscopic interfacial width $l$ and the macroscopic diffusive length $l_D= (Mη)^{1/2}$, where $η$ is the fluid viscosity and $M$ the mobility governing intermolecular diffusion. For small $l_D/l$ we find a diffuse interface regime in which the slip length scales as $ξ\sim(l_Dl)^{1/2}$. For larger $l_D/l>1$ we find a sharp interface regime in which the slip length depends only on the diffusive length, $ξ\sim l_D \sim (Mη)^{1/2}$, and therefore only on the macroscopic variables $η$ and $M$, independent of the microscopic interfacial width $l$. We also give evidence that modifying the microscopic interfacial terms in the model's free energy functional appears to affect the value of the slip length only the diffuse interface regime, consistent with the slip length depending only on macroscopic variables in the sharp interface regime. Finally, we demonstrate the dependence of the dynamic contact angle on the capillary number to be in excellent agreement with the theoretical prediction of \cite{Cox1986}, provided we allow the slip length to be rescaled by a dimensionless prefactor. This prefactor appears to converge to unity in the sharp interface limit, but is smaller in the diffuse interface limit. The excellent agreement of results obtained using three independent numerical methods, across several decades of the relevant dimensionless variables, demonstrates our findings to be free of numerical artifacts.
△ Less
Submitted 20 November, 2015; v1 submitted 31 July, 2015;
originally announced July 2015.
-
Free energy pathways of a Multistable Liquid Crystal Device
Authors:
Halim Kusumaatmaja,
Apala Majumdar
Abstract:
The planar bistable device [Tsakonas \textit{et al., Appl. Phys. Lett.}, 2007, {\textbf{90}}, 111913] is known to have two distinct classes of stable equilibria: the diagonal and rotated solutions. We model this device within the two-dimensional Landau-de Gennes theory, with a surface potential and without any external fields. We systematically compute a special class of transition pathways, refer…
▽ More
The planar bistable device [Tsakonas \textit{et al., Appl. Phys. Lett.}, 2007, {\textbf{90}}, 111913] is known to have two distinct classes of stable equilibria: the diagonal and rotated solutions. We model this device within the two-dimensional Landau-de Gennes theory, with a surface potential and without any external fields. We systematically compute a special class of transition pathways, referred to as minimum energy pathways, between the stable equilibria that provide new information about how the equilibria are connected in the Landau-de Gennes free energy landscape. These transition pathways exhibit an intermediate transition state, which is a saddle point of the Landau-de Gennes free energy. We numerically compute the structural details of the transition states, the optimal transition pathways and the free energy barriers between the equilibria, as a function of the surface anchoring strength. For strong anchoring, the transition pathways are mediated by defects whereas we get defect-free transition pathways for moderate and weak anchoring. In the weak anchoring limit, we recover a cusp catastrophe situation for which the rotated state acts as a transition state connecting two different diagonal states.
△ Less
Submitted 23 August, 2015; v1 submitted 18 March, 2015;
originally announced March 2015.
-
Surveying the Free Energy Landscapes of Continuum Models: Application to Soft Matter Systems
Authors:
Halim Kusumaatmaja
Abstract:
A variety of methods are developed for characterising the free energy landscapes of continuum, Landau-type free energy models. Using morphologies of lipid vesicles and a multistable liquid crystal device as examples, I show that the methods allow systematic study of not only the most relevant minimum energy configurations, but also the transition pathways between any two minima, as well as their c…
▽ More
A variety of methods are developed for characterising the free energy landscapes of continuum, Landau-type free energy models. Using morphologies of lipid vesicles and a multistable liquid crystal device as examples, I show that the methods allow systematic study of not only the most relevant minimum energy configurations, but also the transition pathways between any two minima, as well as their corresponding energy barriers and transition state configurations. A global view of the free energy landscapes can then be visualized using either a disconnectivity graph or a network representation. Different forms of free energy functionals and boundary conditions can be readily implemented, thus allowing these tools to be utilised for a broad range of problems.
△ Less
Submitted 13 February, 2015;
originally announced February 2015.
-
Design principles for Bernal spirals and helices with tunable pitch
Authors:
Szilard N. Fejer,
Dwaipayan Chakrabarti,
Halim Kusumaatmaja,
David J. Wales
Abstract:
Using the framework of potential energy landscape theory, we describe two in silico designs for self-assembling helical colloidal superstructures based upon dipolar dumbbells and Janus-type building blocks, respectively. Helical superstructures with controllable pitch length are obtained using external magnetic field driven assembly of asymmetric dumbbells involving screened electrostatic as well…
▽ More
Using the framework of potential energy landscape theory, we describe two in silico designs for self-assembling helical colloidal superstructures based upon dipolar dumbbells and Janus-type building blocks, respectively. Helical superstructures with controllable pitch length are obtained using external magnetic field driven assembly of asymmetric dumbbells involving screened electrostatic as well as magnetic dipolar interactions. The pitch of the helix is tuned by modulating the Debye screening length over an experimentally accessible range. The second design is based on building blocks composed of rigidly linked spheres with short-range anisotropic interactions, which are predicted to self-assemble into Bernal spirals. These spirals are quite flexible, and longer helices undergo rearrangements via cooperative, hinge-like moves, in agreement with experiment.
△ Less
Submitted 7 July, 2014;
originally announced July 2014.
-
Defect Motifs for Constant Mean Curvature Surfaces
Authors:
Halim Kusumaatmaja,
David J. Wales
Abstract:
The energy landscapes of electrostatically charged particles embedded on constant mean curvature surfaces are analysed for a wide range of system size, curvature, and interaction potentials. The surfaces are taken to be rigid, and the basin-hop** method is used to locate the putative global minimum structures. The defect motifs favoured by potential energy agree with experimental observations fo…
▽ More
The energy landscapes of electrostatically charged particles embedded on constant mean curvature surfaces are analysed for a wide range of system size, curvature, and interaction potentials. The surfaces are taken to be rigid, and the basin-hop** method is used to locate the putative global minimum structures. The defect motifs favoured by potential energy agree with experimental observations for colloidal systems: extended defects (scars and pleats) for weakly positive and negative Gaussian curvatures, and isolated defects for strongly negative Gaussian curvatures. Near the phase boundary between these regimes the two motifs are in strong competition, as evidenced from the appearance of distinct funnels in the potential energy landscape. We also report a novel defect motif consisting of pentagon pairs.
△ Less
Submitted 27 March, 2013;
originally announced March 2013.
-
Anisotropic wetting and de-wetting of drops on substrates patterned with polygonal posts
Authors:
Robert J. Vrancken,
Matthew L. Blow,
Halim Kusumaatmaja,
Ko Hermans,
An M. Prenen,
Cees W. M. Bastiaansen,
Dirk J. Broer,
Julia M. Yeomans
Abstract:
We present results showing how water drops, produced by ink-jet printing, spread on surfaces patterned with lattices of diamond or triangular posts. Considering post widths typically ~7 m and lattice spacings between 15-40 m, we observe drop shapes with 3,4 and 6-fold symmetry, depending on both the symmetry of the lattice and the shape of the posts. This is a result of the different mechanisms of…
▽ More
We present results showing how water drops, produced by ink-jet printing, spread on surfaces patterned with lattices of diamond or triangular posts. Considering post widths typically ~7 m and lattice spacings between 15-40 m, we observe drop shapes with 3,4 and 6-fold symmetry, depending on both the symmetry of the lattice and the shape of the posts. This is a result of the different mechanisms of interface pinning and depinning which depend on the direction of the contact line motion with respect to the post shape. Lattice Boltzmann simulations are used to describe these mechanisms in detail for triangular posts. We also follow the motion of the contact line as the drops evaporate showing that they tend to return to their original shape. To explain this we show that the easy direction for movement is the same for spreading and drying drops. We compare the behaviour of small drops with that of larger drops created by jetting several drops at the same position. We find that the contact line motion is unexpectedly insensitive to drop volume, even when a spherical cap of fluid forms above the posts. The findings are relevant to microfluidic applications and to the control of drop shapes in ink-jet printing.
△ Less
Submitted 23 October, 2012;
originally announced October 2012.
-
Non-isomorphic nucleation pathways arising from morphological transitions of liquid channels
Authors:
Halim Kusumaatmaja,
Reinhard Lipowsky,
Chenyu **,
Radu-Cristian Mutihac,
Hans Riegler
Abstract:
Motivated by unexpected morphologies of the emerging liquid phase (channels, bulges, droplets) at the edge of thin, melting alkane terraces, we propose a new heterogeneous nucleation pathway. The competition between bulk and interfacial energies and the boundary conditions determine the growth and shape of the liquid phase at the edge of the solid alkane terraces. Calculations and experiments reve…
▽ More
Motivated by unexpected morphologies of the emerging liquid phase (channels, bulges, droplets) at the edge of thin, melting alkane terraces, we propose a new heterogeneous nucleation pathway. The competition between bulk and interfacial energies and the boundary conditions determine the growth and shape of the liquid phase at the edge of the solid alkane terraces. Calculations and experiments reveal a "pre-critical" shape transition (channel-to-bulges) of the liquid before reaching its critical volume along a putative shape-conserving path. Bulk liquid emerges from the new shape, and depending on the degree of supersaturation, the new pathway may have two, one, or zero energy barriers. The findings are broadly relevant for many heterogeneous nucleation processes because the novel pathway is induced by common, widespread surface topologies (scratches, steps, etc.).
△ Less
Submitted 3 February, 2012;
originally announced February 2012.
-
Wetting-induced budding of vesicles in contact with several aqueous phases
Authors:
Yanhong Li,
Halim Kusumaatmaja,
Reinhard Lipowsky,
Rumiana Dimova
Abstract:
Osmotic deflation of vesicles enclosing two liquid phases can lead to bulging of one of the phases from the vesicle body. This budding process is preceded by a complete to partial wetting transition of one of the liquid phases on the membrane and depends on the membrane tensions and the tension of the interface between the enclosed liquid phases. These tensions dominate in different morphology reg…
▽ More
Osmotic deflation of vesicles enclosing two liquid phases can lead to bulging of one of the phases from the vesicle body. This budding process is preceded by a complete to partial wetting transition of one of the liquid phases on the membrane and depends on the membrane tensions and the tension of the interface between the enclosed liquid phases. These tensions dominate in different morphology regimes, the crossover of which initiates the budding process. In addition, the degree of budding can be controlled by aspiration via micropipettes. We also demonstrate that the budding direction can be reversed if there are two external phases in contact with the vesicle.
△ Less
Submitted 16 January, 2012;
originally announced January 2012.
-
Droplet-Induced Budding Transitions of Membranes
Authors:
Halim Kusumaatmaja,
Reinhard Lipowsky
Abstract:
Motivated by recent experiments on biomimetic membranes exposed to several aqueous phases, we theoretically study the morphology of a membrane in contact with a liquid droplet formed via aqueous phase separation. We concentrate on membranes with negligible spontaneous curvature. At small droplet volume, bending energy dominates and the droplet is only partially wrapped by the membrane. At large vo…
▽ More
Motivated by recent experiments on biomimetic membranes exposed to several aqueous phases, we theoretically study the morphology of a membrane in contact with a liquid droplet formed via aqueous phase separation. We concentrate on membranes with negligible spontaneous curvature. At small droplet volume, bending energy dominates and the droplet is only partially wrapped by the membrane. At large volume, this configuration can become unstable and undergo a discontinuous transition to a state, in which the droplet is (almost) completely wrapped by the membrane. A morphology diagram, showing the parameter region where such budding transition occurs, is constructed as a function of the membrane tension and the intrinsic contact angle of the liquid with the membrane. The effects of spontaneous curvature are discussed qualitatively.
△ Less
Submitted 25 June, 2011;
originally announced June 2011.
-
Equilibrium morphologies and effective spring constants of capillary bridges
Authors:
Halim Kusumaatmaja,
Reinhard Lipowsky
Abstract:
We theoretically study the behaviour of a liquid bridge formed between a pair of rigid and parallel plates. The plates are smooth, they may either be homogeneous or decorated by circular patches of more hydrophilic domains, and they are generally not identical. We calculate the mechanical equilibrium distance of the liquid bridge as a function of liquid volume, contact angle and radius of the chem…
▽ More
We theoretically study the behaviour of a liquid bridge formed between a pair of rigid and parallel plates. The plates are smooth, they may either be homogeneous or decorated by circular patches of more hydrophilic domains, and they are generally not identical. We calculate the mechanical equilibrium distance of the liquid bridge as a function of liquid volume, contact angle and radius of the chemical domain. We show that a liquid bridge can be an equilibrium configuration as long as the sum of the contact angles at the two walls is larger than $180^\circ$. When comparisons are possible, our results agree well with recent analytical and molecular dynamics simulation results. We also derive the effective spring constant of the liquid bridge as it is perturbed from its equilibrium distance. The spring constant diverges when the sum of the contact angles is $180^\circ$ and is finite otherwise. The value of the spring constant decreases with increasing contact angle and volume, and the rate, at which it decreases, depends strongly on the properties of the two plates.
△ Less
Submitted 8 November, 2010;
originally announced November 2010.
-
Drop dynamics on hydrophobic and superhydrophobic surfaces
Authors:
B. M. Mognetti,
H. Kusumaatmaja,
J. M. Yeomans
Abstract:
We investigate the dynamics of micron-scale drops pushed across a hydrophobic or superhydrophobic surface. The velocity profile across the drop varies from quadratic to linear with increasing height, indicating a crossover from a sliding to a rolling motion. We identify a mesoscopic slip capillary number which depends only on the motion of the contact line and the shape of the drop, and show that…
▽ More
We investigate the dynamics of micron-scale drops pushed across a hydrophobic or superhydrophobic surface. The velocity profile across the drop varies from quadratic to linear with increasing height, indicating a crossover from a sliding to a rolling motion. We identify a mesoscopic slip capillary number which depends only on the motion of the contact line and the shape of the drop, and show that the angular velocity of the rolling increases with increasing viscosity. For drops on superhydrophobic surfaces we argue that a tank treading advance from post to post replaces the diffusive relaxation that allows the contact line to move on smooth surfaces. Hence drops move on superhydrophobic surfaces more quickly than on smooth geometries.
△ Less
Submitted 23 September, 2010;
originally announced September 2010.