-
Improved sequentially processed Cu(In,Ga)(S,Se)2 by Ag alloying
Authors:
Aubin JC. M. Prot,
Michele Melchiorre,
Tilly Schaaf,
Ricardo G. Poeira,
Hossam Elanzeery,
Alberto Lomuscio,
Souhaib Oueslati,
Anastasia Zelenina,
Thomas Dalibor,
Gunnar Kusch,
Yucheng Hu,
Rachel A. Oliver,
Susanne Siebentritt
Abstract:
Alloying small quantities of silver into Cu(In,Ga)Se2 was shown to improve the efficiency for wide and low band gap solar cells. We study low band gap industrial Cu(In,Ga)(S,Se)2 absorbers, substituting less than 10% of the copper with silver, using absolute photoluminescence and cathodoluminescence spectroscopy. Silver improves the grain size and promotes the interdiffusion of Ga and In across th…
▽ More
Alloying small quantities of silver into Cu(In,Ga)Se2 was shown to improve the efficiency for wide and low band gap solar cells. We study low band gap industrial Cu(In,Ga)(S,Se)2 absorbers, substituting less than 10% of the copper with silver, using absolute photoluminescence and cathodoluminescence spectroscopy. Silver improves the grain size and promotes the interdiffusion of Ga and In across the depth of the absorber, resulting in a smoother band gap gradient. However, a certain lateral inhomogeneity is observed near the front and back sides. The non-radiative losses in the bare absorbers are reduced by up to 30 meV.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Composition variations in Cu(In,Ga)(S,Se)2 solar cells: not a gradient, but an interlaced network of two phases
Authors:
Aubin JC. M. Prot,
Michele Melchiorre,
Felix Dingwell,
Anastasia Zelenina,
Hossam Elanzeery,
Alberto Lomuscio,
Thomas Dalibor,
Maxim Guc,
Robert Fonoll-Rubio,
Victor Izquierdo-Roca,
Gunnar Kusch,
Rachel A. Oliver,
Susanne Siebentritt
Abstract:
Record efficiency in chalcopyrite-based solar cells Cu(In,Ga)(S,Se)2 is achieved using a gallium gradient to increase the band gap of the absorber towards the back side. Although this structure has successfully reduced recombination at the back contact, we demonstrate that in industrial absorbers grown in the pilot line of Avancis, the back part is a source of non-radiative recombination. Depth-re…
▽ More
Record efficiency in chalcopyrite-based solar cells Cu(In,Ga)(S,Se)2 is achieved using a gallium gradient to increase the band gap of the absorber towards the back side. Although this structure has successfully reduced recombination at the back contact, we demonstrate that in industrial absorbers grown in the pilot line of Avancis, the back part is a source of non-radiative recombination. Depth-resolved photoluminescence (PL) measurements reveal two main radiative recombination paths at 1.04 eV and 1.5-1.6 eV, attributed to two phases of low and high band gap material, respectively. Instead of a continuous change in the band gap throughout the thickness of the absorber, we propose a model where discrete band gap phases interlace, creating an apparent gradient. Cathodoluminescence and Raman scattering spectroscopy confirm this result. Additionally, deep defects associated to the high gap phase reduce the absorber performance. Etching away the back part of the absorber leads to an increase of one order of magnitude in the PL intensity, i.e., 60 meV in quasi Fermi level splitting. Non-radiative voltage losses correlate linearly with the relative contribution of the high energy PL peak, suggesting that reducing the high gap phase could increase the open circuit voltage by up to 180 mV.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
Dislocation-induced structural and luminescence degradation in InAs quantum dot emitters on silicon
Authors:
Eamonn T. Hughes,
Gunnar Kusch,
Jennifer Selvidge,
Bastien Bonef,
Justin Norman,
Chen Shang,
John E. Bowers,
Rachel A. Oliver,
Kunal Mukherjee
Abstract:
We probe the extent to which dislocations reduce carrier lifetimes and alter luminescence and growth morphology in InAs quantum dots (QD) grown on silicon. These heterostructures are key ingredients to achieving a highly reliable monolithically integrated light source on silicon necessary for photonic integrated circuits. We find up to 20-30% shorter carrier lifetimes at spatially resolved individ…
▽ More
We probe the extent to which dislocations reduce carrier lifetimes and alter luminescence and growth morphology in InAs quantum dots (QD) grown on silicon. These heterostructures are key ingredients to achieving a highly reliable monolithically integrated light source on silicon necessary for photonic integrated circuits. We find up to 20-30% shorter carrier lifetimes at spatially resolved individual dislocations from both the QD ground and excited states at room temperature using time-resolved cathodoluminescence spectroscopy. These lifetimes are consistent with differences in the intensity measured under steady-state excitation suggesting that trap-assisted recombination limits the minority carrier lifetime, even away from dislocations. Our techniques also reveal the dramatic growth of misfit dislocations in these structures under carrier injection fueled by recombination-enhanced dislocation glide and III-V/Si residual strain. Beyond these direct effects of increased nonradiative recombination, we find the long-range strain field of misfit dislocations deeper in the defect filter layers employed during III-V/Si growth alter the QD growth environment and introduce a crosshatch-like variation in the QD emission color and intensity when the filter layer is positioned close to the QD emitter layer. Sessile threading dislocations generate even more egregious hillock defects that also reduce emission intensities by altering layer thicknesses, as measured by transmission electron microscopy and atom probe tomography. Our work presents a more complete picture of the impacts of dislocations relevant for the development of light sources for scalable silicon photonic integrated circuits.
△ Less
Submitted 9 January, 2023;
originally announced January 2023.
