Showing 1–34 of 34 results for author: Kurt, H

Stabilization in two-species chemotaxis systems with singular sensitivity and Lotka-Volterra competitive kinetics

Authors: Halil Ibrahim Kurt, Wenxian Shen

Abstract: The current paper is concerned with the stabilization in the following parabolic-parabolic-elliptic chemotaxis system with singular sensitivity and Lotka-Volterra competitive kinetics, \begin{equation} \begin{cases} u_t=Δu-χ_1 \nabla\cdot (\frac{u}{w} \nabla w)+u(a_1-b_1u-c_1v) ,\quad &x\in Ω\cr v_t=Δv-χ_2 \nabla\cdot (\frac{v}{w} \nabla w)+v(a_2-b_2v-c_2u),\quad &x\in Ω\cr 0=Δw-μw +νu+ λv,\quad &… ▽ More The current paper is concerned with the stabilization in the following parabolic-parabolic-elliptic chemotaxis system with singular sensitivity and Lotka-Volterra competitive kinetics, \begin{equation} \begin{cases} u_t=Δu-χ_1 \nabla\cdot (\frac{u}{w} \nabla w)+u(a_1-b_1u-c_1v) ,\quad &x\in Ω\cr v_t=Δv-χ_2 \nabla\cdot (\frac{v}{w} \nabla w)+v(a_2-b_2v-c_2u),\quad &x\in Ω\cr 0=Δw-μw +νu+ λv,\quad &x\in Ω\cr \frac{\partial u}{\partial n}=\frac{\partial v}{\partial n}=\frac{\partial w}{\partial n}=0,\quad &x\in\partialΩ, \end{cases} \end{equation} where $Ω\subset \mathbb{R}^N$ is a bounded smooth domain, and $χ_i,a_i, b_i, c_i$ ($i=1,2$) and $μ,\, ν, \, λ$ are positive constants. In [25], we proved that for any given nonnegative initial data $u_0,v_0\in C^0(\barΩ)$ with $u_0+v_0\not \equiv 0$, (0.1) has a unique globally defined classical solution provided that $\min\{a_1,a_2\}$ is large relative to $χ_1,χ_2$, and $u_0+v_0$ is not small in the case that $(χ_1-χ_2)^2\le \max\{4χ_1,4χ_2\}$ and $u_0+v_0$ is neither small nor big in the case that $(χ_1-χ_2)^2>\max\{4χ_1,4χ_2\}$. In this paper, we proved that (0.1) has a unique positive constant solution $(u^*,v^*,w^*)$, where $$ u^*=\frac{a_1b_2-c_1a_2}{b_1b_2-c_1c_2},\quad v^*=\frac{b_1a_2-a_1c_2}{b_1b_2-c_1c_2}, \quad w^*=\fracνμu^*+\fracλμ v^*. $$ We obtain some explicit conditions on $χ_1,χ_2$ which ensure that the positive constant solution $(u^*,v^*,w^*)$ is globally stable in the sense that for any given nonnegative initial data $u_0,v_0\in C^0(\barΩ)$ with $u_0\not \equiv 0$ and $v_0\not \equiv 0$, $$ \lim_{t\to\infty}\Big(\|u(t,\cdot;u_0,v_0)-u^*\|_\infty +\|v(t,\cdot;u_0,v_0)-v^*\|_\infty+\|w(t,\cdot;u_0,v_0)-w^*\|_\infty\Big)=0. $$ △ Less

Submitted 3 April, 2024; originally announced April 2024.

Comments: arXiv admin note: text overlap with arXiv:2212.09838

Stability, bifurcation and spikes of stationary solutions in a chemotaxis system with singular sensitivity and logistic source

Authors: Halil Ibrahim Kurt, Wenxian Shen, Shuwen Xue

Abstract: In the current paper, we study stability, bifurcation, and spikes of positive stationary solutions of the following parabolic-elliptic chemotaxis system with singular sensitivity and logistic source, \begin{cases} u_t=u_{xx}-χ(\frac{u}{v} v_x)_x+u(a-b u), & 0<x<L, \, t>0,\cr 0=v_{xx}- μv+ νu, & 0<x<L, \, t>0 \cr u_x(t,0)=u_x(t,L)=v_x(t,0)=v_x(t,L)=0, & t>0, \tag{1} \end{cases} where $χ$, $a$, $b$,… ▽ More In the current paper, we study stability, bifurcation, and spikes of positive stationary solutions of the following parabolic-elliptic chemotaxis system with singular sensitivity and logistic source, \begin{cases} u_t=u_{xx}-χ(\frac{u}{v} v_x)_x+u(a-b u), & 0<x<L, \, t>0,\cr 0=v_{xx}- μv+ νu, & 0<x<L, \, t>0 \cr u_x(t,0)=u_x(t,L)=v_x(t,0)=v_x(t,L)=0, & t>0, \tag{1} \end{cases} where $χ$, $a$, $b$, $μ$, $ν$ are positive constants. Among others, we prove there are $χ^*>0$ and $\{χ_k^*\}\subset [χ^*,\infty)$ ($χ^*\in\{χ_k^*\}$) such that the constant solution $(\frac{a}{b},\fracνμ\frac{a}{b})$ of (1) is locally stable when $0<χ<χ^*$ and is unstable when $χ>χ^*$, and under some generic condition, for each $k\ge 1$, a (local) branch of non-constant stationary solutions of (1) bifurcates from $(\frac{a}{b},\fracνμ\frac{a}{b})$ when $χ$ passes through $χ_k^*$, and global extension of the local bifurcation branch is obtained. We also prove that any sequence of non-constant positive stationary solutions $\{(u(\cdot;χ_n),v(\cdot;χ_n))\}$ of (1) with $χ=χ_n(\to \infty)$ develops spikes at any $x^*$ satisfying $\liminf_{n\to\infty} u(x^*;χ_n)>\frac{a}{b}$. Some numerical analysis is carried out. It is observed numerically that the local bifurcation branch bifurcating from $(\frac{a}{b},\fracνμ\frac{a}{b})$ when $χ$ passes through $χ^*$ can be extended to $χ=\infty$ and the stationary solutions on this global bifurcation extension are locally stable when $χ\gg 1$ and develop spikes as $χ\to\infty$. △ Less

Submitted 21 March, 2024; originally announced March 2024.

Comments: 47 pages

MSC Class: 35B20; 35B32; 35B40; 35Q92; 92C17; 92D25

Ru$_{2-x}$Mn$_{1+x}$Al thin films

Authors: K. E. Siewierska, H. Kurt, B. Shortall, A. Jha, N. Teichert, G. Atcheson, M. Venkatesan, J. M. D. Coey, Z. Gercsi, K. Rode

Abstract: The cubic Heusler alloy Ru$_{2-x}$Mn$_{1+x}$Al is grown in thin film form on MgO and MgAl$_2$O$_4$ substrates. It is a highly spin-polarised ferrimagnetic metal, with weak magnetocrystalline anisotropy. Although structurally and chemically similar to $\text{Mn}_2\text{Ru}_x\text{Ga}$, it does not exhibit ferrimagnetic compensation, or large magneto galvanic effects. The differences are attributed… ▽ More The cubic Heusler alloy Ru$_{2-x}$Mn$_{1+x}$Al is grown in thin film form on MgO and MgAl$_2$O$_4$ substrates. It is a highly spin-polarised ferrimagnetic metal, with weak magnetocrystalline anisotropy. Although structurally and chemically similar to $\text{Mn}_2\text{Ru}_x\text{Ga}$, it does not exhibit ferrimagnetic compensation, or large magneto galvanic effects. The differences are attributed to a combination of atomic order and the hybridisation with the group 13 element Al or Ga. The spin polarisation is around 50 to 60 %. There is a gap in the density of states just above the Fermi level in fully ordered compounds. △ Less

Submitted 30 January, 2023; v1 submitted 24 January, 2023; originally announced January 2023.

Comments: 8 pages , 7 figures, 2 tables

Two-species chemotaxis-competition system with singular sensitivity: Global existence, boundedness, and persistence

Authors: Halil Ibrahim Kurt, Wenxian Shen

Abstract: This paper is concerned with the following parabolic-parabolic-elliptic chemotaxis system with singular sensitivity and Lotka-Volterra competitive kinetics, \begin{equation} \begin{cases} u_t=Δu-χ_1 \nabla\cdot (\frac{u}{w} \nabla w)+u(a_1-b_1u-c_1v) ,\quad &x\in Ω\cr v_t=Δv-χ_2 \nabla\cdot (\frac{v}{w} \nabla w)+v(a_2-b_2v-c_2u),\quad &x\in Ω\cr 0=Δw-μw +νu+ λv,\quad &x\in Ω\cr \frac{\partial u… ▽ More This paper is concerned with the following parabolic-parabolic-elliptic chemotaxis system with singular sensitivity and Lotka-Volterra competitive kinetics, \begin{equation} \begin{cases} u_t=Δu-χ_1 \nabla\cdot (\frac{u}{w} \nabla w)+u(a_1-b_1u-c_1v) ,\quad &x\in Ω\cr v_t=Δv-χ_2 \nabla\cdot (\frac{v}{w} \nabla w)+v(a_2-b_2v-c_2u),\quad &x\in Ω\cr 0=Δw-μw +νu+ λv,\quad &x\in Ω\cr \frac{\partial u}{\partial n}=\frac{\partial v}{\partial n}=\frac{\partial w}{\partial n}=0,\quad &x\in\partialΩ, \end{cases} \end{equation} where $Ω\subset \mathbb{R}^N$ is a bounded smooth domain, and $χ_i$, $a_i$, $b_i$, $ c_i$ ($i=1,2$) and $μ,\, ν, \, λ$ are positive constants. This is the first work on two-species chemotaxis-competition system with singular sensitivity and Lotka-Volterra competitive kinetics. Among others, we prove that for any given nonnegative initial data $u_0,v_0\in C^0(\barΩ)$ with $u_0+v_0\not \equiv 0$, (0.1) has a unique globally defined classical solution $(u(t,x;u_0,v_0),v(t,x;u_0,v_0),w(t,x;u_0,v_0))$ with $u(0,x;u_0,v_0)=u_0(x)$ and $v(0,x;u_0,v_0)=v_0(x)$ provided that $\min\{a_1,a_2\}$ is large relative to $χ_1,χ_2$ and $u_0+v_0$ is not small. Moreover, under the same condition, we prove that \begin{equation*} \limsup_{t\to\infty} \|u(t,\cdot;u_0,v_0)+v(t,\cdot;u_0,v_0)\|_\infty\le M^*, \end{equation*} and \begin{equation*} \liminf_{t\to\infty} \inf_{x\inΩ}(u(t,x,u_0,v_0)+v(t,x;u_0,v_0))\ge m^*, \end{equation*} for some positive constants $M^*,m^*$ independent of $u_0,v_0$, the latter is referred to as combined pointwise persistence. △ Less

Submitted 26 March, 2024; v1 submitted 19 December, 2022; originally announced December 2022.

Curved beam generation and its experimental realization by rectangular prism with asymmetric polynomial back surface

Authors: Berkay Neşeli, Hamza Kurt, Mirbek Turduev

Abstract: With the discovery of self-accelerating beams, possibility of obtaining curved light beams in free space has been realized. These special beams paved the way for many new applications as well as the exploration of novel beam types. Recently, great research effort has been conducted to realize different types of curved beams such as photonic hook and airy beam. These curved types of beams are obtai… ▽ More With the discovery of self-accelerating beams, possibility of obtaining curved light beams in free space has been realized. These special beams paved the way for many new applications as well as the exploration of novel beam types. Recently, great research effort has been conducted to realize different types of curved beams such as photonic hook and airy beam. These curved types of beams are obtained by introducing structural asymmetry or applying non-uniform dielectric distribution to the input and output face of the structure. With this regard, we propose specially designed asymmetric structure with polynomial back surface which generates curved light beams. Proposed lossless dielectric structure can generate curved beams at frequencies varying from 15.78 GHz to 20.09 GHz and corresponding curvature angles of minimum 41.34 and maximum 57.58 degrees, respectively. The physical background of the curved beam formation is based on interference of the exiting light waves that diffract on upper and bottom polynomial surfaces which provides phase modulation leading to the curved trajectory of the propagating light. In addition, the observed beam steering effect is further investigated and the experimental verification in microwave region is conducted to verify our design's operation principle. △ Less

Submitted 5 December, 2022; v1 submitted 24 October, 2022; originally announced November 2022.

Comments: 9 pages, 4 figures

Multi-directional cloak design by all dielectric unit-cell optimized structure

Authors: Muratcan Ayik, Hamza Kurt, Oleg V. Minin, Igor V. Minin, Mirbek Turduev

Abstract: In this manuscript, we demonstrate the design and experimental proof of an optical cloaking structure which multi-directionally conceals a perfectly electric conductor (PEC) object from an incident plane wave. The dielectric modulation around the highly reflective scattering PEC object is determined by an optimization process for multi-directional cloaking purposes. And to obtain the multi-directi… ▽ More In this manuscript, we demonstrate the design and experimental proof of an optical cloaking structure which multi-directionally conceals a perfectly electric conductor (PEC) object from an incident plane wave. The dielectric modulation around the highly reflective scattering PEC object is determined by an optimization process for multi-directional cloaking purposes. And to obtain the multi-directional effect of the cloaking structure, an optimized slice is mirror symmetrized through a radial perimeter. Three-dimensional (3D) finite-difference time-domain method is integrated with genetic optimization to achieve cloaking design. In order to overcome the technological problems of the corresponding devices in the optical range and to experimentally demonstrate the proposed concept, our experiments were carried out on a scale model in the microwave range. The scaled proof-of-concept of proposed structure is fabricated by 3D printing of polylactide material, and the brass metallic alloy is used as a perfect electrical conductor for microwave experiments. A good agreement between numerical and experimental results is achieved. The proposed design approach is not restricted only to multi-directional optical cloaking but can also be applied for different cloaking scenarios dealing with electromagnetic waves in nanoscales as well as other types of such as acoustic waves. Using nanotechnology, our scale proof-of-concept research will take the next step towards the creation of "optical cloaking" devices. △ Less

Submitted 19 October, 2022; originally announced October 2022.

Comments: 16 pages, 7 figures

Reinforcement learning enabled the design of compact and efficient integrated photonic devices

Authors: Mirbek Turduev, Emre Bor, Onur Alparslan, Y. Sinan Hanay, Hamza Kurt, Shin'ichi Arakawa, Masayuki Murata

Abstract: In this paper, we introduce the design approach of integrated photonic devices by employing reinforcement learning known as attractor selection. Here, we combined three-dimensional finite-difference time-domain method with attractor selection algorithm, which is based on artificial neural networks, to achieve ultra-compact and highly efficient photonic devices with low crosstalk such as wavelength… ▽ More In this paper, we introduce the design approach of integrated photonic devices by employing reinforcement learning known as attractor selection. Here, we combined three-dimensional finite-difference time-domain method with attractor selection algorithm, which is based on artificial neural networks, to achieve ultra-compact and highly efficient photonic devices with low crosstalk such as wavelength demultiplexers and a polarization splitter. The presented devices consist of silicon-on-insulator materials, which are compatible with complementary metal-oxide-semiconductor technology, and their structural dimensions enable the possible fabrication process in the future. The numerical results are presented for the near-infrared wavelengths at around 1550 nm, and the performance of designed photonic devices with footprint of 3x3 um2 are compared with the previously reported structures. Consequently, the reinforcement learning is successfully applied to design smaller and superior integrated photonic devices where the use of presented approach can be further expanded to different applications. △ Less

Submitted 19 October, 2022; originally announced October 2022.

Comments: 6 pages, 6 figures

Chemotaxis systems with singular sensitivity and logistic source: Boundedness, persistence, absorbing set, and entire solutions

Authors: Halil Ibrahim Kurt, Wenxian Shen

Abstract: This paper deals with the following parabolic-elliptic chemotaxis system with singular sensitivity and logistic source, \begin{equation} \begin{cases} u_t=Δu-χ\nabla\cdot (\frac{u}{v} \nabla v)+u(a(t,x)-b(t,x) u), & x\in Ω,\cr 0=Δv- μv+ νu, & x\in Ω, \cr \frac{\partial u}{\partial n}=\frac{\partial v}{\partial n}=0, & x\in\partialΩ, \end{cases} \end{equation} where $Ω\subset \mathbb{R}^N$ is a smo… ▽ More This paper deals with the following parabolic-elliptic chemotaxis system with singular sensitivity and logistic source, \begin{equation} \begin{cases} u_t=Δu-χ\nabla\cdot (\frac{u}{v} \nabla v)+u(a(t,x)-b(t,x) u), & x\in Ω,\cr 0=Δv- μv+ νu, & x\in Ω, \cr \frac{\partial u}{\partial n}=\frac{\partial v}{\partial n}=0, & x\in\partialΩ, \end{cases} \end{equation} where $Ω\subset \mathbb{R}^N$ is a smooth bounded domain, $a(t,x)$ and $b(t,x)$ are positive smooth functions, and $χ$, $μ$ and $ν$ are positive constants. In the very recent paper [25], we proved that for given nonnegative initial function $0\not\equiv u_0\in C^0(\bar Ω)$ and $s\in\mathbb{R}$, (0.1) has a unique globally defined classical solution $(u(t,x;s,u_0),v(t,x;s,u_0))$ with $u(s,x;s,u_0)=u_0(x)$, provided that $a_{\inf}=\inf_{t\in\mathbb{R},x\inΩ}a(t,x)$ is large relative to $χ$ and $u_0$ is not small. In this paper, we further investigate qualitative properties of globally defined positive solutions of (0.1) under the assumption that $a_{\inf}$ is large relative to $χ$ and $u_0$ is not small. Among others, we provide some concrete estimates for $\int_Ωu^{-p}$ and $\int_Ωu^q$ for some $p>0$ and $q>\max\{2,N\}$ and prove that any globally defined positive solution is bounded above and below eventually by some positive constants independent of its initial functions. We prove the existence of a ``rectangular'' type bounded invariant set (in $L^q$) which eventually attracts all the globally defined positive solutions. We also prove that (0.1) has a positive entire classical solution $(u^*(t,x),v^*(t,x))$, which is periodic in $t$ if $a(t,x)$ and $b(t,x)$ are periodic in $t$ and is independent of $t$ if $a(t,x)$ and $b(t,x)$ are independent of $t$. △ Less

Submitted 3 March, 2024; v1 submitted 29 April, 2022; originally announced May 2022.

Ultra-compact, high-NA achromatic multilevel diffractive lens via metaheuristic approach

Authors: Bumin K. Yildirim, Hamza Kurt, Mirbek Turduev

Abstract: Recently, the multilevel diffractive lenses (MDLs) have attracted considerable attention mainly due to their superior wave focusing performance; however, efforts to correct the chromatic aberration are still in progress. Here, we demonstrate the numerical design and experimental demonstration of high-numerical aperture (NA) (${\sim}0.99$), diffraction-limited achromatic multilevel diffractive lens… ▽ More Recently, the multilevel diffractive lenses (MDLs) have attracted considerable attention mainly due to their superior wave focusing performance; however, efforts to correct the chromatic aberration are still in progress. Here, we demonstrate the numerical design and experimental demonstration of high-numerical aperture (NA) (${\sim}0.99$), diffraction-limited achromatic multilevel diffractive lens (AMDL) operating in microwave range $10 GHz$ - $14 GHz$. A multi-objective differential evolution (MO-DE) algorithm is incorporated with the three-dimensional finite-difference time-domain (3D FDTD) method to optimize both the heights and widths of each concentric ring (zone) of the AMDL structure. In this study, the desired focal distance $ΔF_d$ is treated as an optimization parameter in addition to the structural parameters of the zones for the first time. In other words, MO-DE diminishes the necessity of predetermined focal distance and center wavelength by also providing an alternative method for phase profile tailoring. The proposed AMDL can be considered as an ultra-compact, the radius is $3.7{λ_c}$ where ${λ_c}$ is the center wavelength (i.e., $12 GHz$ frequency), and flat lens which has a thickness of ${λ_c}$. The numerically calculated full-width at half-maximum (FWHM) values are below $0.554λ$ and focusing efficiency values are varying between $28{\%}$ and $45.5{\%}$. To experimentally demonstrate the functionality of the optimized lens, the AMDL composing of polylactic acid material (PLA) polymer is fabricated via 3D-printing technology. The numerical and experimental results are compared, discussed in detail and a good agreement between them is observed. Moreover, the verified AMDL in microwave regime is scaled down to the visible wavelengths to observe achromatic and diffraction-limited focusing behavior between $380 nm$ - $620 nm$ wavelengths. △ Less

Submitted 26 April, 2021; originally announced April 2021.

Comments: 12 pages, 7 Figures, 1 Table

Nanostructured Multilayer Coatings for Spatial Filtering

Authors: Lina Grineviciute, Ceren Babayigit, Darius Gailevičius, Martynas Peckus, Mirbek Turduev, Tomas Tolenis, Mikas Vengris, Hamza Kurt, Kestutis Staliunas

Abstract: Spatial filtering is an important mechanism to improve the spatial quality of laser beams. Typically, a confocal arrangement of lenses with a diaphragm in the focal plane is used for intracavity spatial filtering. Such conventional filtering requires access to the far-field domain. In microlasers, however, conventional filtering is impossible due to the lack of space in micro-resonators to access… ▽ More Spatial filtering is an important mechanism to improve the spatial quality of laser beams. Typically, a confocal arrangement of lenses with a diaphragm in the focal plane is used for intracavity spatial filtering. Such conventional filtering requires access to the far-field domain. In microlasers, however, conventional filtering is impossible due to the lack of space in micro-resonators to access the far-field. Therefore, a novel concept for more compact and efficient spatial filtering is necessary. In this study, we propose and demonstrate a conceptually novel mechanism of spatial filtering in the near-field domain, by a nanostructured multilayer coating - a 2D photonic crystal structure with a periodic index modulation along the longitudinal and transverse direction to the beam propagation. The structure is built on a nano-modulated substrate, to provide the transverse periodicity. The physical vapor deposition is used to provide self-repeating modulation in the longitudinal direction. We experimentally demonstrate a 5 micron thick photonic multilayer structure composed of nanostructured multiple layers of alternating high- and low-index materials providing spatial filtering in the near-infrared frequencies with 2° low angle passband. The proposed photonic structure can be considered as an ideal component for intracavity spatial filtering in microlasers. △ Less

Submitted 19 November, 2020; originally announced November 2020.

Inverse design of compact optical cloaks and experimental demonstration at microwave frequencies

Authors: Mediha Tutgun, Emre Bor, Mirbek Turduev, Hamza Kurt

Abstract: Inverse design in photonics has gathered increasing attention as a powerful approach that goes beyond the intuition-based designs. In this Letter, we present the inverse design and experimental demonstration of compact optical cloaks at microwave frequencies is conducted. Two different configurations of rectangular and circular cloaks are numerically designed to reduce the scatterings of incident… ▽ More Inverse design in photonics has gathered increasing attention as a powerful approach that goes beyond the intuition-based designs. In this Letter, we present the inverse design and experimental demonstration of compact optical cloaks at microwave frequencies is conducted. Two different configurations of rectangular and circular cloaks are numerically designed to reduce the scatterings of incident light interacting with a perfect electrical conductor object. The designed cloaking structures consist of dielectric polylactide material with a low refractive index and they are fabricated by 3D printing approach. The experimental measurements are in good agreement with the numerical calculations. The designed region covering (4λ x 4λ) area enables hiding circular object of λ diameter where λ denotes the wavelength of incident light. The proposed approach may enable the concealment of different objects possessing various size and shapes. △ Less

Submitted 5 September, 2020; originally announced September 2020.

Finite-time blow-up prevention by logistic source in parabolic-elliptic chemotaxis models with singular sensitivity in any dimensional setting

Authors: Halil Ibrahim Kurt, Wenxian Shen

Abstract: In recent years, a lot of attention has been drawn to the question of whether logistic kinetics is sufficient to enforce the global existence of classical solutions or to prevent finite-time blow-up in various chemotaxis models. The current paper is to study the above question for the following parabolic-elliptic chemotaxis system with singular sensitivity and logistic source in any space dimensio… ▽ More In recent years, a lot of attention has been drawn to the question of whether logistic kinetics is sufficient to enforce the global existence of classical solutions or to prevent finite-time blow-up in various chemotaxis models. The current paper is to study the above question for the following parabolic-elliptic chemotaxis system with singular sensitivity and logistic source in any space dimensional setting, \begin{equation} \begin{cases} u_t=Δu-χ\nabla\cdot (\frac{u}{v} \nabla v)+u(a(x,t)-b(x,t) u^{1+σ}),\quad &x\in Ω\cr 0=Δv-μv+νu,\quad &x\in Ω\quad \cr\frac{\partial u}{\partial n}=\frac{\partial v}{\partial n}=0,\quad &x\in\partialΩ, \end{cases} \end{equation} where $Ω\subset \mathbb{R}^n$ is a bounded domain with smooth boundary $\partialΩ$, $χ$ is the singular chemotaxis sensitivity coefficient, $a(x,t)$ and $b(x,t)$ are positive smooth functions, $μ,ν$ are positive constants, and $σ\ge 0$. When $σ>0$, we prove that, for every given nonnegative initial data $0\not\equiv u_0\in C^0(\bar Ω)$, (0.1) has a unique globally defined classical solution $(u_σ(x,t;u_0),v_σ(x,t;u_0))$ with $u_σ(x,0;u_0)=u_0(x)$, which shows that, in any space dimensional setting, strong logistic kinetics is sufficient to enforce the global existence of classical solutions and hence prevents the occurrence of finite-time blow-up even for arbitrarily large $χ$. In addition, the solutions are shown to be uniformly bounded under the conditions \begin{equation*} a_{\inf}> \begin{cases} \frac{μχ^2}{4}, &\text{if $0< χ\leq 2,$}\\ μ(χ-1), &\text{if $χ>2$.}\\ \end{cases} \end{equation*} When $σ=0$, we show that the classical solution $(u(x,t;u_0,0),v(x,t;u_0,0))$ exists globally and stays bounded provided that both $a(x,t)$ and $u_0(x)$ are not small. △ Less

Submitted 29 February, 2024; v1 submitted 4 August, 2020; originally announced August 2020.

Topological phase transition of the centered rectangular photonic lattice

Authors: J. Hajivandi, H. Kurt

Abstract: A Cm planar photonic material (two-dimensional) including the mirror reflection symmetry is explored where in the Dirac cones appeared at the high-symmetry points of the Brillouin zone boundary. By implementing the specific perturbation on the photonic crystal (PC), topological transition can make a bridge between the trivial PC (ordinary insulator) and the topological insulator including zero and… ▽ More A Cm planar photonic material (two-dimensional) including the mirror reflection symmetry is explored where in the Dirac cones appeared at the high-symmetry points of the Brillouin zone boundary. By implementing the specific perturbation on the photonic crystal (PC), topological transition can make a bridge between the trivial PC (ordinary insulator) and the topological insulator including zero and non-zero spin Chern number (Cs), respectively. The perturbation can be realized through the rotation of the Cm photonic crystal around the nonzero angle to its initial position. Therefore, breaking the mirror symmetry of the unit cell leads to mismatch of the symmetry planes of the lattice. This modification results in the directional band gap & band inversion which is the signature of the topological transitions. The mentioned PC would be suitable for examination of the unidirectional transport of light at the topological interfaces. △ Less

Submitted 25 May, 2020; originally announced May 2020.

Robust Transport of the Edge Modes along the Photonic Topological Interfaces of Different Configurations

Authors: J. Hajivandi, H. Kurt

Abstract: Two-dimensional photonic crystals made of six air holes on a core-shell dielectric material has been proposed to study the newly emerged photonic quantum spin Hall insulator. Specifically, radii modification of the air holes and core-shell without breaking time-reversal (TR) symmetry are supported by the C_6 point group symmetry upon a proposed scheme. It is shown that multiple topological transit… ▽ More Two-dimensional photonic crystals made of six air holes on a core-shell dielectric material has been proposed to study the newly emerged photonic quantum spin Hall insulator. Specifically, radii modification of the air holes and core-shell without breaking time-reversal (TR) symmetry are supported by the C_6 point group symmetry upon a proposed scheme. It is shown that multiple topological transitions from an ordinary insulator with zero spin Chern number (Cs) to a topological insulator with a non-zero Cs can be achieved by modifying the geometry of the photonic structure. Studying the two counter-propagating helical edge modes which have the opposite group velocities are of individual importance for various optical purposes like scattering-free waveguides protected to various defects, disorders and strong light-matter interactions. We show that topological edge states demonstrate slow light characteristics. The findings emphasize the fact that exploring topological phase transition can be applied as a unique approach for realizing light transport, robust energy transportation and slow light in integrated photonic circuits and devices. △ Less

Submitted 30 May, 2020; v1 submitted 18 May, 2020; originally announced May 2020.

Simulating Topological Robustness of Fano Resonance in Rotated Honeycomb Photonic Crystals

Authors: J. Hajivandi, E. Kaya, G. Edwards, H. Kurt

Abstract: The Fano resonance with a distinctive ultra-sharp, asymmetric line shape and high quality factor Q, is a widely occurring phenomena that has a large variety of optical, plasmonic and microwave manifestations. In this paper, we explore the characteristic robustness of the Fano resonance mode, which is topologically protected by manufacturing band inversion induced by breaking the mirror symmetry of… ▽ More The Fano resonance with a distinctive ultra-sharp, asymmetric line shape and high quality factor Q, is a widely occurring phenomena that has a large variety of optical, plasmonic and microwave manifestations. In this paper, we explore the characteristic robustness of the Fano resonance mode, which is topologically protected by manufacturing band inversion induced by breaking the mirror symmetry of a two-dimensional honeycomb photonic crystal (HPC), associated with C_6 point group symmetry. So the dark and bright topological edge modes appear in the band gap made by opening of the Dirac cone. Destructive and constructive interference of the dark and bright modes leads to the asymmetric line shape of the Fano resonance. The Fano resonance mode which is very sensitive to the environmental and geometrical perturbations, can be applied to sensor design. Here we demonstrate that the topological Fano resonance mode preserves its asymmetric, ultra-sharp line shape in the presence of the disorder, defects and cavities, and this has useful optical device applications such as in low threshold lasers, and extremely precise interferometers △ Less

Submitted 30 May, 2020; v1 submitted 16 March, 2020; originally announced March 2020.

Topological photonic states and directional emission of the light exiting from the photonic topological structure composed of two dimensional honeycomb photonic crystals with different point group symmetries

Authors: J. Hajivandi, H. Kurt

Abstract: In this work, we investigate a two dimensional honeycomb photonic crystal (2D HPC) with C_6 symmetry point group, which is known to demonstrate a double Dirac cone at k=0 of the Brillion zone. Then we design two deformed PCs from the original one, by modifying the radius of the cylinders from the unit cell center in which the symmetry C_6 is reduced to the C_3\u{psion} group and new structure exhi… ▽ More In this work, we investigate a two dimensional honeycomb photonic crystal (2D HPC) with C_6 symmetry point group, which is known to demonstrate a double Dirac cone at k=0 of the Brillion zone. Then we design two deformed PCs from the original one, by modifying the radius of the cylinders from the unit cell center in which the symmetry C_6 is reduced to the C_3\u{psion} group and new structure exhibits the photonic topological edge states. Consequently, the topologically protected propagation of the edge states with back scattering-immune feature is observed along the interfaces of the two deformed PCs without any defects or including cavities or bend. Furthermore, the directional surface modes exit from the photonic topological insulators (PTIs) including various defects, is investigated. As well as, we explore the propagation and coupling of light through the coupled photonic topological insulators (CPTIs). △ Less

Submitted 27 February, 2020; originally announced February 2020.

Intensity tuning of the edge states in the imperfect topological waveguides based on the photonic crystals with the C3 point group symmetry

Authors: Jamileh Hajivandi, Hasan Pakarzadeh, Hamza Kurt

Abstract: In this paper, we explore the topological behavior of a two-dimensional honeycomb photonic crystal (PC) based on the presence of double Dirac-cone connected the orbitals p and d, due to the C6 point group symmetry of the hexagonal PCs. Removing the four-fold degeneracies between the bands at the Dirac point can be achieved by introducing three small dielectric rods near the bigger ones to realize… ▽ More In this paper, we explore the topological behavior of a two-dimensional honeycomb photonic crystal (PC) based on the presence of double Dirac-cone connected the orbitals p and d, due to the C6 point group symmetry of the hexagonal PCs. Removing the four-fold degeneracies between the bands at the Dirac point can be achieved by introducing three small dielectric rods near the bigger ones to realize the perturbed PCs with the C3 point group symmetry with different topological features. By proposing the unique structure involving two PCs with different topological effects, one may study the one-way light distribution along the local boundary in spite of the defects, cavities, and disorders. Moreover, we investigate the variation of the transmitted intensity values under different defect conditions and realize that the size, location and material type affect the transmitted light. In the other words, tunable intensity of the edge states can be achieved through adjusting the defects such that by increasing the radius of rods, the intensity of the edge states can be enhanced or by increasing their distance from the unit cell center, the intensity will be decreased. For example, by increasing the radius of one of the rods, the intensity of the edge states is increased up to the 130%. Additionally, by moving the position of the mentioned rod along the direction, x, the intensity of the edge states will be decreased to 82.08%. Finally, topological rhombic resonator enables unidirectional filtering of guided mode. The fact that different light manipulation scenarios can be realized provides a unique aspect for topological photonic insulators. △ Less

Submitted 12 June, 2020; v1 submitted 3 February, 2020; originally announced February 2020.

Crossed chiral band approximation for wideband self-collimation of light

Authors: Melike Gumus, Onder Akcaalan, Hamza Kurt

Abstract: We propose a perspective to the evaluation of the wide bandwidth phenomenon, by introducing the band tailoring and chiral band approximation on the self-collimation effect for low-symmetric photonic structures. In the case of the crossing of the bands, we claim the excitation of the lower mode can provide the utilization of the entire bandwidth by suppressing the intersection regions where the fre… ▽ More We propose a perspective to the evaluation of the wide bandwidth phenomenon, by introducing the band tailoring and chiral band approximation on the self-collimation effect for low-symmetric photonic structures. In the case of the crossing of the bands, we claim the excitation of the lower mode can provide the utilization of the entire bandwidth by suppressing the intersection regions where the frequencies tend to mix. Thereby, we design broadband self-collimation capable, defect-free photonic structures and examine their performances. A fractional bandwidth of $0.35$ (${a}\backslashλ=0.429-0.607$) and $0.37$ (${a}\backslashλ=0.481-0.701$) are achieved for radii of ${r}=0.25{a}$ and ${r}=0.23{a}$, respectively. We explore the full-range collimation using transmission and E-field intensity analysis in addition to band diagrams and group velocity dispersions. Moreover, we indicate all-angle collimation validity even for highly tilted sources up to an angle of $80^\circ$. △ Less

Submitted 27 November, 2019; originally announced November 2019.

Comments: 5 pages, 4 figures

Report number: The Scientific and Technological Research Council of Turkey (TUBITAK) Project No. 115R036

Inverse Design of All-dielectric Parallel-Plane Mirror Resonator

Authors: Mediha Tutgun, Done Yilmaz, Aydan Yeltik, Mirbek Turduev, Hamza Kurt

Abstract: In this study, we used parallel plane mirror resonator analogy to design all-dielectric optical resonator that is performed with the objective-first inverse design algorithm. Confinement of the light is succeeded via predefined objective function to create symmetric mirror regions for the fundamental transverse-electric polarization mode. The algorithm creates bandgap in random structure to obtain… ▽ More In this study, we used parallel plane mirror resonator analogy to design all-dielectric optical resonator that is performed with the objective-first inverse design algorithm. Confinement of the light is succeeded via predefined objective function to create symmetric mirror regions for the fundamental transverse-electric polarization mode. The algorithm creates bandgap in random structure to obtain resonance peak at the desired wavelength without any intuitive scanning of the parameter space. The first order mode is confined on the cavity region at pre-defined wavelength. The obtained structure is analysed by using the two-dimensional finite-difference time-domain method. The proposed structure has a compact configuration with a footprint of $13.394 \times 0.592 μm^2$. △ Less

Submitted 11 March, 2019; originally announced March 2019.

Report number: The Scientific and Technological Research Council of Turkey (TUBITAK) Project No. 116F200

High-performance 2D 1xN T-junction Wavelength (De)Multiplexer Systems by Inverse Design

Authors: Yusuf A. Yilmaz, Ahmet M. Alpkilic, Aydan Yeltik, Hamza Kurt

Abstract: Previously proposed designs of integrated photonic devices have used the intuitive brute force approach or optimization methods that employ parameter search algorithms. However, a small parameter space and poor exploitation of the underlying physics have limited device performance, functionality, and footprint. In this paper, we propose efficient and compact 2D 1xN in-plane-incidence wavelength de… ▽ More Previously proposed designs of integrated photonic devices have used the intuitive brute force approach or optimization methods that employ parameter search algorithms. However, a small parameter space and poor exploitation of the underlying physics have limited device performance, functionality, and footprint. In this paper, we propose efficient and compact 2D 1xN in-plane-incidence wavelength demultiplexers by using recently developed objective-first inverse design algorithm. Output ports in the presented 1xN photonic devices are located along the transverse to the input channel. Ultra-high device performance was achieved for the specific designs of 1x2, 1x4, and 1x6 wavelength (de)multiplexers with small footprints 2.80 um x 2.80 um, 2.80 um x 4.60 um, 2.80 um x 6.95 um, respectively. We used two approaches to binarization-level-set and binarization-cost-to obtain silicon wavelength demultiplexer considering fabrication constraints. For instance, the transmission efficiency of binarization-cost 1x2 demultiplexer was -0.30 dB for 1.31 um and -0.54 dB at 1.55 um while crosstalk at the operating wavelengths are negligibly small, i.e., -17.80 and -15.29 dB, respectively. Moreover, for the binarization-cost 1x4 demultiplexer, the transmission efficiency values were approximately -1.90 dB at 1.31, 1.39, 1.47, and 1.55 um as the crosstalk was approximately -13 dB. Furthermore, the objective-first algorithm was used to employ our demultiplexers as multiplexers which means the ports that were once used as inputs in demultiplexers are designed to be used as outputs. The inverse design approach that allows for the implementation of more than six output channels together with the proposed functionalities can help develop compact and manufacturable 2D 1xN couplers. △ Less

Submitted 27 February, 2019; originally announced February 2019.

Comments: 12 pages, 5 figures

Active beam steering and afocal zooming by nematic liquid crystal infiltrated graded index photonic structures

Authors: Ceren Babayigit, Hamza Kurt, Mirbek Turduev

Abstract: This study presents active beam steering and afocal zooming of light by incorporating liquid crystals (LCs) with graded index photonic crystal (GRIN PC). The GRIN PC structures are composed of low refractive index polymer annular rods having gradually varied radii of holes. To actively manipulate incident light, the annular rods are infiltrated with nematic LCs. By applying an external voltage to… ▽ More This study presents active beam steering and afocal zooming of light by incorporating liquid crystals (LCs) with graded index photonic crystal (GRIN PC). The GRIN PC structures are composed of low refractive index polymer annular rods having gradually varied radii of holes. To actively manipulate incident light, the annular rods are infiltrated with nematic LCs. By applying an external voltage to the infiltrated LCs, the effective index profile of the low-index GRIN PC structure is modulated without introducing any mechanical movement. The incident beam deflection and corresponding focal distance modulation are tuned only by controlling the applied bias voltage. In the present work, hyperbolic secant refractive index profile is chosen to design GRIN PC structures. To design GRIN PC structure with annular PCs, Maxwell-Garnett effective medium approximation is employed. Moreover, we analytically express the relation between infiltrated LCs and gradient parameter to show the physical background of the tuning ability of the proposed devices. Also, beam steering and afocal zooming devices are analytically investigated via geometrical optics and numerically realized with the help of the finite-difference time-domain method. A beam deflection with an angle change of Δθout= 44° and a light magnification with maximum x2.15 are obtained. LCs are inexpensive materials and work under low voltage/power condition. This feature can be used for designing an electro-optic GRIN PC device that can be useful in various optical applications. △ Less

Submitted 20 February, 2019; originally announced February 2019.

Comments: 13 pages, 6 figures

Reduced Symmetric 2D Photonic Crystal Cavity with Wavelength Tunability

Authors: Melike A. Gumus, Mediha Tutgun, Done Yilmaz, Hamza Kurt

Abstract: In this paper, we propose a microcavity supported by a designed photonic crystal structure (PhC) that supplies both tunability of cavity modes and quality factor of cavity. Low symmetric defect region provides a trigger effect for the frequency shifting by means of rotational manipulation of small symmetry elements. Deviation of effective filling ratio as a result of rotational modification within… ▽ More In this paper, we propose a microcavity supported by a designed photonic crystal structure (PhC) that supplies both tunability of cavity modes and quality factor of cavity. Low symmetric defect region provides a trigger effect for the frequency shifting by means of rotational manipulation of small symmetry elements. Deviation of effective filling ratio as a result of rotational modification within the defect region results in the emanation of cavity modes at different frequencies. Here, we numerically demonstrate the frequency shifting for each obtained mode with respect to defect region architecture. In addition to wavelength tunability, quality factor, mode volume, and Purcell factors are analyzed for the slightly modified structures. Also, electric field distributions of each mode that emerge at distinct frequencies have been also studied at adjusted frequency modes which are observed for all rotational modification scenarios as $θ_{rot} =[0^\circ,15^\circ,30^\circ, 40^\circ] $. After the investigations in 2D of silicon material ($ε_r=12$), 3D simulations are performed and the collected data is used for the stacking approximation of 3D structures to get the 2D, thus the cross-checking of the quality factor that acquired from the 2D simulation can be executed by comparison with 3D. Limited 3D results are projected to approximate 2D ones step by step and get an exponential trend which reaches in the limit to the $10^8$ value for Q-factor. Besides, 2D and 3D simulations of alumina ($ε_r=9.61$) in terms of mode analysis and quality factor have been repeated considering the microwave experiments. Therefore, experimental analysis is compared with the numerical results and good agreement between the two is found. △ Less

Submitted 7 February, 2019; originally announced February 2019.

Comments: 13 pages, 7 figures

Report number: The Scientific and Technological Research Council of Turkey (TUBITAK) Project No. 115R036

Analytical, numerical and experimental investigation of Luneburg lens system for directional cloaking

Authors: Ceren Babayigit, Aydin Sinan Evren, Emre Bor, Hamza Kurt, Mirbek Turduev

Abstract: In this study, the design of a directional cloaking based on the Luneburg lens system is proposed and its operating principle is experimentally verified. The cloaking concept is analytically investigated via geometrical optics and numerically realized with the help of the finite-difference time-domain method. In order to benefit from its unique focusing and/or collimating characteristics of light,… ▽ More In this study, the design of a directional cloaking based on the Luneburg lens system is proposed and its operating principle is experimentally verified. The cloaking concept is analytically investigated via geometrical optics and numerically realized with the help of the finite-difference time-domain method. In order to benefit from its unique focusing and/or collimating characteristics of light, the Luneburg lens is used. We show that by the proper combination of Luneburg lenses in an array form, incident light bypasses the region between junctions of the lenses, i.e., the "dark zone." Hence, direct interaction of an object with propagating light is prevented if one places the object to be cloaked inside that dark zone. This effect is used for hiding an object which is made of a perfectly electric conductor material. In order to design an implementable cloaking device, the Luneburg lens is discretized into a photonic crystal structure having gradually varying air cylindrical holes in a dielectric material by using Maxwell Garnett effective medium approximations. Experimental verifications of the designed cloaking structure are performed at microwave frequencies of around 8 GHz. The proposed structure is fabricated by three-dimensional printing of dielectric polylactide material and a brass metallic alloy is utilized in place of the perfectly electric conductor material in microwave experiments. Good agreement between numerical and experimental results is found. △ Less

Submitted 29 April, 2019; v1 submitted 13 December, 2018; originally announced December 2018.

Comments: 15 pages, 6 figures

Journal ref: Phys. Rev. A 99, 043831 (2019)

Broadband polarization-independent low-crosstalk metasurface lens array-based mid wave infrared focal plane arrays

Authors: Aytekin Ozdemir, Nazmi Yilmaz, Fehim Taha Bagci, Yuzuru Takashima, Hamza Kurt

Abstract: The miniaturization of pixel is essential for achieving high-resolution, planar, compact-size focal plane arrays (FPAs); however, the resulted increase in the optical crosstalk between adjacent pixels leads to serious drawback and trade-off. In the current work, we design and propose an efficient broadband polarization-insensitive all-dielectric metasurface lens array-based focal plane arrays (FPA… ▽ More The miniaturization of pixel is essential for achieving high-resolution, planar, compact-size focal plane arrays (FPAs); however, the resulted increase in the optical crosstalk between adjacent pixels leads to serious drawback and trade-off. In the current work, we design and propose an efficient broadband polarization-insensitive all-dielectric metasurface lens array-based focal plane arrays (FPA) operating in the mid-wave infrared (MWIR). High focusing efficiency over 0.85 with superior optical crosstalk performance is achieved. We demonstrated that optical crosstalk can be reduced to low levels below 2.8% with high efficiency. For the device performance, a similar figure-of-merit (FoM) from the previous reports was used and our device achieved FoM of 91 which outperformed all other types MWIR FPAs designed so far. Proposed metasurface lens arrays demonstrate great potential for increasing the signal to noise ratio and sensitivity thus paving the way for compact-size, high-resolution FPAs. △ Less

Submitted 15 March, 2018; originally announced March 2018.

Comments: 4 pages, 5 figures

All-dielectric self-cloaked structures

Authors: Zeki Hayran, Ramon Herrero, Muriel Botey, Hamza Kurt, Kestutis Staliunas

Abstract: While practical realizations of optical invisibility have been achieved so far by various ingenious methods, they generally rely on complex materials which prevent the wide implementation of such schemes. Here, we propose an alternative indivisibility procedure to design objects (i.e. self-cloaked structures) that have optical properties identical to the surrounding environment and are, thereby, i… ▽ More While practical realizations of optical invisibility have been achieved so far by various ingenious methods, they generally rely on complex materials which prevent the wide implementation of such schemes. Here, we propose an alternative indivisibility procedure to design objects (i.e. self-cloaked structures) that have optical properties identical to the surrounding environment and are, thereby, intrinsically invisible to an external observer as such (without the necessity of an external cloak). The proposed method is based on the uncoupling of the scattered waves from the incident radiation by judiciously manipulating the scattering potential of a given object. We show that such a procedure is able to yield optical invisibility for any arbitrarily shaped object within any specified frequency bandwidth by simply employing isotropic non-magnetic dielectric materials, without the usage of loss or gain material. The validity of the design principle has been verified by direct experimental observations of the spatial electric field profiles and scattering patterns at the microwave regime. Our alternative self-cloaking strategy may have profound implications especially in noninvasive probing and cloaked sensor applications, where the wave penetrability into the sensor region is essential together with its invisibility to minimize the field distortion. △ Less

Submitted 14 October, 2017; v1 submitted 2 August, 2017; originally announced August 2017.

Comments: 8 pages, 12 figures

Directionality Fields generated by a Local Hilbert Transform

Authors: W. W. Ahmed, R. Herrero, M. Botey, Z. Hayran, H. Kurt, K. Staliunas

Abstract: We propose a new approach based on a local Hilbert transform to design non-Hermitian potentials generating arbitrary vector fields of directionality, p(r), with desired shapes and topologies. We derive a local Hilbert transform to systematically build such potentials, by modifying background potentials (being either regular or random, extended or localized). In particular, we explore particular di… ▽ More We propose a new approach based on a local Hilbert transform to design non-Hermitian potentials generating arbitrary vector fields of directionality, p(r), with desired shapes and topologies. We derive a local Hilbert transform to systematically build such potentials, by modifying background potentials (being either regular or random, extended or localized). In particular, we explore particular directionality fields, for instance in the form of a focus to create sinks for probe fields (which could help to increase absorption at the sink), or to generate vortices in the probe fields. Physically, the proposed directionality fields provide a flexible new mechanism for dynamically sha** and precise control over probe fields leading to novel effects in wave dynamics. △ Less

Submitted 17 December, 2017; v1 submitted 14 July, 2017; originally announced July 2017.

Comments: 10 pages, 6 figures

Journal ref: Phys. Rev. A 97, 033824 (2018)

Invisibility on demand based on a generalized Hilbert transform

Authors: Zeki Hayran, Ramon Herrero, Muriel Botey, Hamza Kurt, Kestutis Staliunas

Abstract: Designing invisible objects without the usage of extreme materials is a long-sought goal for photonic applications. Invisibility techniques demonstrated so far typically require high anisotropy, gain and losses, while also not being flexible. Here we propose an invisibility approach to suppress the scattering of waves from/to given directions and for particular frequency ranges, i.e. invisibility… ▽ More Designing invisible objects without the usage of extreme materials is a long-sought goal for photonic applications. Invisibility techniques demonstrated so far typically require high anisotropy, gain and losses, while also not being flexible. Here we propose an invisibility approach to suppress the scattering of waves from/to given directions and for particular frequency ranges, i.e. invisibility on demand. We derive a Born approximation-based generalized Hilbert transform for a specific invisibility arrangement relating the two quadratures of the complex permittivity of an object. The theoretical proposal is confirmed by numerical calculations, indicating that near-perfect invisibility can be attained for arbitrary objects with low-index contrast. We further demonstrate the cases where the idea can be extended to high-index objects or restricted to within practical limits by avoiding gain areas. The proposed concept opens a new route for the practical implementation of complex-shaped objects with arbitrarily suppressed scatterings determined on demand. △ Less

Submitted 14 December, 2017; v1 submitted 28 March, 2017; originally announced March 2017.

Comments: 21 pages, 15 figures

Journal ref: Phys. Rev. A 98, 013822 (2018)

Rainbow Trap** in a Chirped Three-Dimensional Photonic Crystal

Authors: Zeki Hayran, Hamza Kurt, Kestutis Staliunas

Abstract: Light localization and intensity enhancement in a woodpile layer-by-layer photonic crystal, whose interlayer distance along the propagation direction is gradually varied, has been theoretically predicted and experimentally demonstrated. The phenomenon is shown to be related to the progressive slowing down and stop** of the incoming wave, as a result of the gradual variation of the local dispersi… ▽ More Light localization and intensity enhancement in a woodpile layer-by-layer photonic crystal, whose interlayer distance along the propagation direction is gradually varied, has been theoretically predicted and experimentally demonstrated. The phenomenon is shown to be related to the progressive slowing down and stop** of the incoming wave, as a result of the gradual variation of the local dispersion. The light localization is chromatically resolved, since every frequency component is stopped and reflected back at different spatial positions. It has been further discussed that the peculiar relation between the stop** distance and the wave vector distribution can substantially increase the enhancement factor to more than two orders of magnitude. Compared to previously reported one- and two-dimensional photonic crystal configurations, the proposed scheme has the advantage of reducing the propagation losses by providing a three-dimensional photonic bandgap confinement in all directions. The slowing down and localization of waves inside photonic media can be exploited in many applications that requires enhanced interaction of light and matter. △ Less

Submitted 12 January, 2017; originally announced January 2017.

Comments: 13 pages, 7 figures

High spin polarization in epitaxial films of ferrimagnetic Mn3Ga

Authors: Huseyin Kurt, Karsten Rode, Munuswamy Venkatesan, Plamen Stanislavov Stamenov, John Michael David Coey

Abstract: Ferrimagnetic Mn3Ga exhibits a unique combination of low saturation magnetization (Ms = 0.11 MA m-1) and high perpendicular anisotropy with a uniaxial anisotropy constant of Ku = 0.89 MJ m-3. Epitaxial c-axis films exhibit spin polarization as high as 58%, measured using point contact Andreev reflection. These epitaxial films will be able to support thermally stable sub-10 nm bits for spin transfe… ▽ More Ferrimagnetic Mn3Ga exhibits a unique combination of low saturation magnetization (Ms = 0.11 MA m-1) and high perpendicular anisotropy with a uniaxial anisotropy constant of Ku = 0.89 MJ m-3. Epitaxial c-axis films exhibit spin polarization as high as 58%, measured using point contact Andreev reflection. These epitaxial films will be able to support thermally stable sub-10 nm bits for spin transfer torque memories. △ Less

Submitted 23 October, 2010; originally announced October 2010.

Comments: 13 pages, 3 figures, 1 table

Manipulating Current-Induced Magnetization Switching

Authors: S. Urazhdin, H. Kurt, M. AlHajDarwish, Norman O. Birge, W. P. Pratt Jr., J. Bass

Abstract: We summarize our recent findings on how current-driven magnetization switching and magnetoresistance in nanofabricated magnetic multilayers are affected by varying the spin-scattering properties of the non-magnetic spacers, the relative orientations of the magnetic layers, and spin-dependent scattering properties of the interfaces and the bulk of the magnetic layers. We show how our data are exp… ▽ More We summarize our recent findings on how current-driven magnetization switching and magnetoresistance in nanofabricated magnetic multilayers are affected by varying the spin-scattering properties of the non-magnetic spacers, the relative orientations of the magnetic layers, and spin-dependent scattering properties of the interfaces and the bulk of the magnetic layers. We show how our data are explained in terms of current-dependent effective magnetic temperature. △ Less

Submitted 3 September, 2004; originally announced September 2004.

Comments: 6 pages, 6 figures, submitted to MMM'04 proceedings

Current-Induced Magnetization Switching in Permalloy-based Nanopillars with Cu, Ag, and Au

Authors: H. Kurt, R. Loloee, W. P. Pratt Jr., J. Bass

Abstract: We compare magnetoresistances (MR) and switching currents (I_s) at room temperature (295K) and 4.2K for Permalloy/N/Permalloy nanopillars undergoing current-induced magnetization switching (CIMS), with non-magnetic metals N = Cu, Ag, and Au. The N-metal thickness is held fixed at 10 nm. Any systematic differences in MR and I_s for the different N-metals are modest, suggesting that Ag and Au repr… ▽ More We compare magnetoresistances (MR) and switching currents (I_s) at room temperature (295K) and 4.2K for Permalloy/N/Permalloy nanopillars undergoing current-induced magnetization switching (CIMS), with non-magnetic metals N = Cu, Ag, and Au. The N-metal thickness is held fixed at 10 nm. Any systematic differences in MR and I_s for the different N-metals are modest, suggesting that Ag and Au represent potentially viable alternatives for CIMS studies and devices to the more widely used Cu. △ Less

Submitted 28 August, 2004; originally announced August 2004.

Comments: Submitted for Magnetism Conference, MMM-04

Changes in magnetic scattering anisotropy at a ferromagnetic/superconducting interface

Authors: K. Eid, H. Kurt, W. P. Pratt Jr., J. Bass

Abstract: We show that some metals and alloys (X = Cu, Ag, FeMn, or Cu and Ag combined with each other), sputtered between ferromagnetic Co and superconducting Nb, produce no change in current-perpendicular-to-plane magnetoresistance (CPP-MR) in a carefully designed CPP-spin-valve. In contrast, other metals (Ru or Au) or combinations (Cu or Ag combined with Au, Ru, or FeMn) change the CPP-MR, in some case… ▽ More We show that some metals and alloys (X = Cu, Ag, FeMn, or Cu and Ag combined with each other), sputtered between ferromagnetic Co and superconducting Nb, produce no change in current-perpendicular-to-plane magnetoresistance (CPP-MR) in a carefully designed CPP-spin-valve. In contrast, other metals (Ru or Au) or combinations (Cu or Ag combined with Au, Ru, or FeMn) change the CPP-MR, in some cases even reversing its sign. We ascribe these changes to activation of magnetic scattering anisotropies at a ferromagnetic/superconducting interface, apparently by strong spin-flip** between the Co and Nb layers. △ Less

Submitted 16 April, 2004; originally announced April 2004.

Comments: 4 pages, 4 figures

Controlled normal and inverse magnetoresistance and current-driven magnetization switching in magnetic nanopillars

Authors: M. AlHajDarwish, H. Kurt, S. Urazhdin, A. Fert, R. Loloee, W. P. Pratt Jr., J. Bass

Abstract: Combining pairs of ferromagnetic metals with different signs of scattering anisotropies, let us independently invert the magnetoresistance and the direction of current-driven switching in ferromagnetic/non-magnetic/ferromagnetic metal nanopillars. We show all four combinations of normal and inverse behaviors, at both room temperature and 4.2K. In all cases studied, the direction of switching is… ▽ More Combining pairs of ferromagnetic metals with different signs of scattering anisotropies, let us independently invert the magnetoresistance and the direction of current-driven switching in ferromagnetic/non-magnetic/ferromagnetic metal nanopillars. We show all four combinations of normal and inverse behaviors, at both room temperature and 4.2K. In all cases studied, the direction of switching is set by the net scattering anisotropy of the fixed (polarizing) ferromagnet. We provide simple arguments for what we see. △ Less

Submitted 18 December, 2003; originally announced December 2003.

Comments: 4 pages, 5 figures, submitted to PRL

Effect of Antiferromagnetic Interlayer Coupling on Current-Assisted Magnetization Switching

Authors: S. Urazhdin, H. Kurt, W. P. Pratt Jr, J. Bass

Abstract: We compare magnetization switching in Co/Cu/Co nanopillars with uncoupled and dipole-field coupled Co layers. In uncoupled nanopillars, current-driven switching is hysteretic at low magnetic field H and changes to reversible, characterized by telegraph noise, at high H. We show that dipolar coupling both affects the switching current and causes the switching to become reversible at small H. The… ▽ More We compare magnetization switching in Co/Cu/Co nanopillars with uncoupled and dipole-field coupled Co layers. In uncoupled nanopillars, current-driven switching is hysteretic at low magnetic field H and changes to reversible, characterized by telegraph noise, at high H. We show that dipolar coupling both affects the switching current and causes the switching to become reversible at small H. The coupling thus changes the switching to reversible, hysteretic, and then reversible again as H increases. We describe our results in terms of current-assisted thermal activation. △ Less

Submitted 28 March, 2003; originally announced March 2003.

Comments: 3 pages, 3 figures