-
Atomistic-Level Analysis of Nanoindentation-Induced Plasticity in Arc--Melted NiFeCrCo Alloys: The role of stacking faults
Authors:
F. J. Dominguez-Gutierrez,
A. Olejarz,
M. Landeiro Dos Reis,
E. Wyszkowska,
D. Kalita,
W. Y. Huo,
I. Jozwik,
L. Kurpaska,
S. Papanikolaou,
M. J. Alava,
K. Muszka
Abstract:
Concentrated solid solution alloys (CSAs) have attracted attention for their promising properties; however, current manufacturing methods face challenges in complexity, high costs, and limited scalability, raising concerns about industrial viability. The prevalent technique, arc melting, yields high-purity samples with complex shapes. In this study, we explore nanoindentation tests at room tempera…
▽ More
Concentrated solid solution alloys (CSAs) have attracted attention for their promising properties; however, current manufacturing methods face challenges in complexity, high costs, and limited scalability, raising concerns about industrial viability. The prevalent technique, arc melting, yields high-purity samples with complex shapes. In this study, we explore nanoindentation tests at room temperature where arc-melted samples exhibit larger grain sizes, diminishing the effects of grain boundaries on the results. Motivated by these findings, our investigation focuses on the atomistic-level exploration of plasticity mechanisms, specifically dislocation nucleation and propagation during nanoindentation tests. The intricate chemistry of NiFeCrCo CSA influences pile-ups and slip traces, aiming to elucidate plastic deformation by considering both pristine and pre-existing stacking fault tetrahedra. Our analysis scrutinizes dynamic deformation processes, defect nucleation, and evolution, complemented by stress-strain and dislocation densities-strain curves illustrating the hardening mechanism of defective materials. Additionally, we examine surface morphology and plastic deformation through atomic shear strain and displacement map**s. This integrated approach provides insights into the complex interplay between material structure and mechanical behavior, paving the way for an enhanced understanding and potential advancements in CSA applications.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Comparison of Raman imaging assessment methods in phase determination and stress analysis of zirconium oxide layer
Authors:
K. Suchorab,
M. Gaweda,
L. Kurpaska
Abstract:
This work describes Raman imaging and its data evaluation methods by using the softwares original features: built-in fitting function and K-means cluster analysis KMC followed by fitting in an external environment. For the first time, these methods were compared in terms of their principles, limitations, versatility, and process duration. The performed analysis showed the indispensability of Raman…
▽ More
This work describes Raman imaging and its data evaluation methods by using the softwares original features: built-in fitting function and K-means cluster analysis KMC followed by fitting in an external environment. For the first time, these methods were compared in terms of their principles, limitations, versatility, and process duration. The performed analysis showed the indispensability of Raman imaging in terms of phase distribution, phase content calculation, and stress determination. Zirconium oxide formed on different zirconium alloys under various oxidation conditions was selected as an exemplary material for this analysis. The reason for the material choice is that it is an excellent example of the application of this type of Raman analysis since both phase distribution and stress analysis in zirconium oxide are of crucial importance for the development of zirconium alloys, especially for nuclear applications. The juxtaposition of the results showed advantages and limitations of both procedures allowing a definition of the criteria for selecting the evaluation method for different applications.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
High versus low energy ion irradiation impact on functional properties of PLD-grown alumina coatin
Authors:
A. Zaborowska,
Ł. Kurpaska,
E. Wyszkowska,
A. Azarov,
M. Turek,
A. Kosińska,
M. Frelek-Kozak,
J. Jagielski
Abstract:
It is well known that ion irradiation can be successfully used to reproduce microstructural features triggered by neutron irradiation. Even though the irradiation process brings many benefits, it is also associated with several drawbacks. For example, the penetration depth of the ion in the material is very limited. This is particularly important for energies below MeV, ultimately reducing the num…
▽ More
It is well known that ion irradiation can be successfully used to reproduce microstructural features triggered by neutron irradiation. Even though the irradiation process brings many benefits, it is also associated with several drawbacks. For example, the penetration depth of the ion in the material is very limited. This is particularly important for energies below MeV, ultimately reducing the number of available irradiation facilities. In addition to that, extracting information exclusively from the modified volume may be challenging. Therefore, extreme caution must be taken when interpreting obtained data. Our work aims to compare the findings of nanomechanical studies already conducted separately on thin amorphous ceramic coatings irradiated with ions of different energies, hence layers of different thicknesses. In this work, we show that in some instances, the 10% rule may be obeyed. In order to prove our finding, we compared results obtained for ion irradiated (with two energies: 0.25 and 1.2 MeV up to 25dpa) alumina coating system. Mechanical properties of pristine and ion-irradiated specimens were studied by nanoindentation technique. Interestingly, the qualitative relationship between nanohardness and irradiation damage level is very similar, regardless of the energy used. The presented work proves that for some materials (e.g., hard coatings), the qualitative assessment of the mechanical changes using nanoindentation might be feasible even for shallow implantation depths.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Absolute radiation tolerance of amorphous alumina coatings at room temperature
Authors:
A. Zaborowska,
Ł. Kurpaska,
M. Clozel,
E. J. Olivier,
J. H. O'Connell,
M. Vanazzi,
F. Di Fonzo,
A. Azarov,
I. Jóźwik,
M. Frelek-Kozak,
R. Diduszko,
J. H. Neethling,
J. Jagielski
Abstract:
In this study structural and mechanical properties of a 1 um thick Al2O3 coating, deposited on 316L stainless steel by Pulsed Laser Deposition (PLD), subjected to high energy ion irradiation were assessed. Mechanical properties of pristine and ion-modified specimens were investigated using the nanoindentation technique. A comprehensive characterization combining Transmission Electron Microscopy an…
▽ More
In this study structural and mechanical properties of a 1 um thick Al2O3 coating, deposited on 316L stainless steel by Pulsed Laser Deposition (PLD), subjected to high energy ion irradiation were assessed. Mechanical properties of pristine and ion-modified specimens were investigated using the nanoindentation technique. A comprehensive characterization combining Transmission Electron Microscopy and Grazing-Incidence X-ray Diffraction provided deep insight into the structure of the tested material at the nano- and micro- scale. Variation in the local atomic ordering of the irradiated zone at different doses was investigated using a reduced distribution function analysis obtained from electron diffraction data. Findings from nanoindentation measurements revealed a slight reduction in hardness of all irradiated layers. At the same time TEM examination indicated that the irradiated layer remained amorphous over the whole dpa range. No evidence of crystallization, void formation or element segregation was observed up to the highest implanted dose. Reported mechanical and structural findings were critically compared with each other pointing to the conclusion that under given irradiation conditions, over the whole range of doses used, alumina coatings exhibit excellent radiation resistance. Obtained data strongly suggest that investigated material may be considered as a promising candidate for next-generation nuclear reactors, especially LFR-type, where high corrosion protection is one of the highest prerogatives to be met.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Surface and in-depth structural changes in nuclear graphite irradiated with noble gases described with Raman imaging
Authors:
Magdalena Gawęda,
Magdalena Wilczopolska,
Kinga Suchorab,
Małgorzata Frelek-Kozak,
Łukasz Kurpaska,
Jacek Jagielski
Abstract:
4th Generation high-temperature gas-cooled nuclear reactors (HTGR) are regarded as possible sources of industrial heat in Poland and Europe, allowing for a substantial reduction of the dependency on gas and coal import. It is mainly due to their safety of use, reliability and economy in a current energetic crisis. In this work, graphite, as a primary construction material and neutron moderator in…
▽ More
4th Generation high-temperature gas-cooled nuclear reactors (HTGR) are regarded as possible sources of industrial heat in Poland and Europe, allowing for a substantial reduction of the dependency on gas and coal import. It is mainly due to their safety of use, reliability and economy in a current energetic crisis. In this work, graphite, as a primary construction material and neutron moderator in HTGR, was evaluated before and after ion irradiation since its properties depend on the material's structure and purity. Commercial graphite materials (IG-110, NBG-17) and the laboratory's in-home material were chosen for the exemplary samples. The structural damage in HTGR was simulated with energetic Ar+ and He+ ions with fluencies from 1E12 to 2E17 ion/cm2. Raman imaging was chosen to assess radiation damage build-up: the crystallites' evolution, occurrence and types of defects. The recorded evolution showed stronger disordering of the material with heavier Ar+ ions than with He+.
△ Less
Submitted 20 April, 2023;
originally announced April 2023.
-
Mechanical behavior of ion-irradiated ODS RAF steels strengthened with different types of refractory oxides
Authors:
M. Frelek-Kozak,
Ł. Kurpaska,
K. Mulewska,
M. Zieliński,
R. Diduszko,
A. Kosińska,
D. Kalita,
W. Chromiński,
M. Turek,
K. Kaszyca,
A. Zaborowska,
J. Jagielski
Abstract:
In the present work, authors focused on verifying structural and mechanical properties of Oxide Dispersed Strengthening (ODS) steels strengthened by three different types of refractory oxides submitted to ion-irradiation. Three materials strengthened with Y2O3 or Al2O3 or ZrO2 were produced by mechanical alloying and Spark Plasma Sintering technique. Specimens have been submitted to high energy Ar…
▽ More
In the present work, authors focused on verifying structural and mechanical properties of Oxide Dispersed Strengthening (ODS) steels strengthened by three different types of refractory oxides submitted to ion-irradiation. Three materials strengthened with Y2O3 or Al2O3 or ZrO2 were produced by mechanical alloying and Spark Plasma Sintering technique. Specimens have been submitted to high energy Ar-ion irradiation at room temperature with three fluences. This procedure allowed to generate strongly damaged zone with a thickness of 230nm. SEM/EBSD and TEM observations, GIXRD analysis, and nanoindentation tests have been included in examination of modified layers. Investigation revealed alteration of structural and mechanical features as a result of Ar-irradiation. Obtained results showed a strong correlation between the strengthening oxide and materials' behavior under radiation damage. It has been proved that below 1x1015ions/cm2 mechanical properties in the modified layer of all materials are very similar. Reported behavior may be related to the efficient annealing of the radiation defect process. Above this limit, significant differences between the materials are visible. It is believed that described phenomenon is directly related to the presence of the structural features and their capacity to act as defect sinks. Consequently, type of dominant mechanisms occurring in modified layer is proposed.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Microstructure and mechanical properties of mechanically-alloyed CoCrFeNi high-entropy alloys using low ball-to-powder ratio
Authors:
A. Olejarz,
W. Y. Huo,
M. Zielinski,
R. Diduszko,
E. Wyszkowska,
A. Kosinska,
D. Kalita,
I. Jozwik,
M. Chmielewski,
F. Fang,
L. Kurpaska
Abstract:
High-entropy alloys are extensively studied due to their very promising properties. However manufacturing methods currently used to prepare HEAs are complicated, costly, and likely non-industrially scalable processes. This limits their evolution and poses questions regarding the material's applicability in the future. Considering the abovementioned point, we developed a novel methodology for effic…
▽ More
High-entropy alloys are extensively studied due to their very promising properties. However manufacturing methods currently used to prepare HEAs are complicated, costly, and likely non-industrially scalable processes. This limits their evolution and poses questions regarding the material's applicability in the future. Considering the abovementioned point, we developed a novel methodology for efficient HEA production using a low ball-to-powder ratio (BPR). Using different milling times, we manufactured four HEA powder precursors using a BPR of 5:1, which were later sintered via the Spark Plasma Sintering technique and heat treated. Microstructural characterization was performed by optical microscopy, Scanning Electron Microscopy equipped with EDS and EBSD detectors, and X-ray diffraction. Mechanical properties were measured using nano and microhardness techniques. In this work, we follow the structural evolution of the material and connect it with the strengthening effect as a function of milling time. Furthermore, we discuss the impact of different sintering and annealing conditions, proving that HEAs characterized by high mechanical properties may be manufactured using low BPR.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
Prediction of steel nanohardness by using graph neural networks on surface polycrystallinity maps
Authors:
Kamran Karimi,
Henri Salmenjoki,
Katarzyna Mulewska,
Lukasz Kurpaska,
Anna Kosińska,
Mikko Alava,
Stefanos Papanikolaou
Abstract:
As a bulk mechanical property, nanoscale hardness in polycrystalline metals is strongly dependent on microstructural features that are believed to be heavily influenced from complex features of polycrystallinity -- namely, individual grain orientations and neighboring grain properties. We train a graph neural network (GNN) model, with each grain center location being a graph node, to assess the pr…
▽ More
As a bulk mechanical property, nanoscale hardness in polycrystalline metals is strongly dependent on microstructural features that are believed to be heavily influenced from complex features of polycrystallinity -- namely, individual grain orientations and neighboring grain properties. We train a graph neural network (GNN) model, with each grain center location being a graph node, to assess the predictability of micromechanical responses of nano-indented low-carbon 310S stainless steel (alloyed with Ni and Cr) surfaces, solely based on surface polycrystallinity, captured by electron backscatter diffraction maps. The grain size distribution ranges between $1-100~μ$m, with mean grain size at $18~μ$m. The GNN model is trained on a set of nanomechanical load-displacement curves, obtained from nanoindentation tests and is subsequently used to make predictions of nano-hardness at various depths, with sole input being the grain locations and orientations. Model training is based on a sub-standard set of $\sim10^2$ hardness measurements, leading to an overall satisfactory performance. We explore model performance and its dependence on various structural/topological grain-level descriptors, such as the grain size and number of nearest neighbors. Analogous GNN model frameworks may be utilized for quick, inexpensive hardness estimates, for guidance to detailed nanoindentation experiments, akin to cartography tool developments in the world exploration era.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Detection of the onset of yielding and creep failure from digital image correlation
Authors:
Tero Mäkinen,
Agata Zaborowska,
Małgorzata Frelek-Kozak,
Iwona Jóźwik,
Łukasz Kurpaska,
Stefanos Papanikolaou,
Mikko J. Alava
Abstract:
There are a multitude of applications in which structural materials would be desired to be nondestructively evaluated, while in a component, for plasticity and failure characteristics. In this way, safety and resilience features can be significantly improved. Nevertheless, while failure can be visible through cracks, plasticity is commonly invisible and highly microstructure-dependent. Here, we sh…
▽ More
There are a multitude of applications in which structural materials would be desired to be nondestructively evaluated, while in a component, for plasticity and failure characteristics. In this way, safety and resilience features can be significantly improved. Nevertheless, while failure can be visible through cracks, plasticity is commonly invisible and highly microstructure-dependent. Here, we show that an equation-free method based on principal component analysis is capable of detecting yielding and tertiary creep onset, directly from strain fields that are obtained by digital image correlation, applicable on components, continuously and nondestructively. We demonstrate the applicability of the method to yielding of Ni-based Haynes 230 metal alloy polycrystalline samples, which are also characterized through electron microscopy and benchmarked using continuum polycrystalline plasticity modeling. Also, we successfully apply this method to yielding during uniaxial tension of Hastelloy X polycrystalline samples, and also to the onset of tertiary creep in quasibrittle fiber composites under uniaxial tension. We conclude that there are key features in the spatiotemporal fluctuations of local strain fields that can be used to infer mechanical properties.
△ Less
Submitted 9 November, 2022;
originally announced November 2022.
-
Mechanisms of strength and hardening in austenitic stainless 310S steel: Nanoindentation experiments and multiscale modeling
Authors:
F. J. Domínguez-Gutíerrez,
K. Mulewska,
A. Ustrzycka,
R. Alvarez-Donado,
A. Kosínska,
W. Y. Huo,
L. Kurpaska,
I. Jozwik,
S. Papanikolaou,
M. Alava
Abstract:
Austenitic stainless steels with low carbon have exceptional mechanical properties and are capable to reduce embrittlement, due to high chromium and nickel alloying, thus they are very attractive for efficient energy production in extreme environments. It is key to perform nanomechanical investigations of the role of chromium and the form of the particular alloy composition that give rise to the e…
▽ More
Austenitic stainless steels with low carbon have exceptional mechanical properties and are capable to reduce embrittlement, due to high chromium and nickel alloying, thus they are very attractive for efficient energy production in extreme environments. It is key to perform nanomechanical investigations of the role of chromium and the form of the particular alloy composition that give rise to the excellent mechanical properties of steel. We perform nanoindentation experiments and molecular dynamics (MD) simulations of FCC austenitic stainless steel 310S, using established interatomic potentials, and we use a comparison to the plastic behavior of NiFe solid solutions under similar conditions for the elucidation of key dislocation mechanisms. We combine EBSD images to connect crystalline orientations to nanoindentation results, and provide input data to MD simulations for modeling mechanisms of defects nucleation and interactions. The maps of impressions after nanoindentation indicate that the Ni-Fe-Cr composition in 310S steel leads to strain localization and hardening. A detailed analysis of the dislocation dynamics at different depths leads to the development of an experimentally consistent Kocks-Mecking-based continuum multiscale model. Furthermore, the analysis of geometrically necessary dislocations (GND) shows to be responsible for exceptional hardness at low depths, predicted by the Ma-Clarke's constitutive model.
△ Less
Submitted 6 May, 2022;
originally announced May 2022.
