-
Charge transport through the multiple end zigzag edge states of armchair graphene nanoribbons and heterojunctions
Authors:
David M T Kuo
Abstract:
This comprehensive study investigates charge transport through the multiple end zigzag edge states of finite-size armchair graphene nanoribbons/boron nitride nanoribbons (n-AGNR/w-BNNR) junctions under a longitudinal electric field, where n and w denote the widths of the AGNRs and the BNNRs, respectively. In 13-atom wide AGNR segments, the edge states exhibit a blue Stark shift in response to the…
▽ More
This comprehensive study investigates charge transport through the multiple end zigzag edge states of finite-size armchair graphene nanoribbons/boron nitride nanoribbons (n-AGNR/w-BNNR) junctions under a longitudinal electric field, where n and w denote the widths of the AGNRs and the BNNRs, respectively. In 13-atom wide AGNR segments, the edge states exhibit a blue Stark shift in response to the electric field, with only the long decay length zigzag edge states showing significant interaction with the red Stark shift subband states. Charge tunneling through such edge states assisted by the subband states is elucidated in the spectra of the transmission coefficient. In the 13-AGNR/6-BNNR heterojunction, notable influences on the energy levels of the end zigzag edge states of 13-AGNRs induced by BNNR segments are observed. We demonstrate the modulation of these energy levels in resonant tunneling situations, as depicted by bias-dependent transmission coefficient spectra. Intriguing nonthermal broadening of tunneling current shows a significant peak-to-valley ratio. Our findings highlight the promising potential of n-AGNR/w-BNNR heterojunctions with long decay length edge states in the realm of GNR-based single electron transistors at room temperature.
△ Less
Submitted 14 June, 2024; v1 submitted 27 May, 2024;
originally announced May 2024.
-
Thermoelectric Properties of Armchair Graphene Nanoribbons with Array Characteristics
Authors:
David M T Kuo
Abstract:
The thermoelectric properties of armchair graphene nanoribbons (AGNRs) with array characteristics are investigated theoretically using the tight-binding model and Green's function technique. The AGNR structures with array characteristics are created by embedding a narrow boron nitride nanoribbon (BNNR) into a wider AGNR, resulting in two narrow AGNRs. This system is denoted as w-AGNR/n-BNNR, where…
▽ More
The thermoelectric properties of armchair graphene nanoribbons (AGNRs) with array characteristics are investigated theoretically using the tight-binding model and Green's function technique. The AGNR structures with array characteristics are created by embedding a narrow boron nitride nanoribbon (BNNR) into a wider AGNR, resulting in two narrow AGNRs. This system is denoted as w-AGNR/n-BNNR, where 'w' and 'n' represent the widths of the wider AGNR and narrow BNNR, respectively. We elucidate the coupling effect between two narrow symmetrical AGNRs on the electronic structure of w-AGNR/n-BNNR. A notable discovery is that the power factor of the 15-AGNR/5-BNNR with the minimum width surpasses the quantum limitation of power factor for 1D ideal systems. The energy level degeneracy observed in the first subbands of w-AGNR/n-BNNR structures proves to be highly advantageous in enhancing the electrical power outputs of graphene nanoribbon devices.
△ Less
Submitted 16 January, 2024; v1 submitted 10 December, 2023;
originally announced December 2023.
-
Style-Aware Radiology Report Generation with RadGraph and Few-Shot Prompting
Authors:
Benjamin Yan,
Ruochen Liu,
David E. Kuo,
Subathra Adithan,
Eduardo Pontes Reis,
Stephen Kwak,
Vasantha Kumar Venugopal,
Chloe P. O'Connell,
Agustina Saenz,
Pranav Rajpurkar,
Michael Moor
Abstract:
Automatically generated reports from medical images promise to improve the workflow of radiologists. Existing methods consider an image-to-report modeling task by directly generating a fully-fledged report from an image. However, this conflates the content of the report (e.g., findings and their attributes) with its style (e.g., format and choice of words), which can lead to clinically inaccurate…
▽ More
Automatically generated reports from medical images promise to improve the workflow of radiologists. Existing methods consider an image-to-report modeling task by directly generating a fully-fledged report from an image. However, this conflates the content of the report (e.g., findings and their attributes) with its style (e.g., format and choice of words), which can lead to clinically inaccurate reports. To address this, we propose a two-step approach for radiology report generation. First, we extract the content from an image; then, we verbalize the extracted content into a report that matches the style of a specific radiologist. For this, we leverage RadGraph -- a graph representation of reports -- together with large language models (LLMs). In our quantitative evaluations, we find that our approach leads to beneficial performance. Our human evaluation with clinical raters highlights that the AI-generated reports are indistinguishably tailored to the style of individual radiologist despite leveraging only a few examples as context.
△ Less
Submitted 31 October, 2023; v1 submitted 26 October, 2023;
originally announced October 2023.
-
Electronic structures and transport properties of cove-edged graphene nanoribbons
Authors:
David M T Kuo
Abstract:
In this comprehensive study, we undertake a thorough theoretical examination of the electronic subband structures within cove-edged zigzag graphene nanoribbons (CZGNRs) using the tight-binding model. These unique nanostructures arise from the systematic removal of carbon atoms along the zigzag edges of conventional zigzag graphene nanoribbons (ZGNRs). Notably, CZGNRs that exhibit intriguing band g…
▽ More
In this comprehensive study, we undertake a thorough theoretical examination of the electronic subband structures within cove-edged zigzag graphene nanoribbons (CZGNRs) using the tight-binding model. These unique nanostructures arise from the systematic removal of carbon atoms along the zigzag edges of conventional zigzag graphene nanoribbons (ZGNRs). Notably, CZGNRs that exhibit intriguing band gaps can be conceptualized as interconnected graphene quantum dots (GQDs). An essential finding of our investigation is the inverse relationship between the size of GQDs and the band gaps of CZGNRs, a relationship that remains consistent regardless of the number of GQDs present. Additionally, we delve into the examination of electron effective masses in proximity to the edges of the first conduction subband of CZGNRs as GQD sizes expand. We observe a significant increase in electron effective masses as GQDs become larger, which is attributed to the increasing similarity between larger GQDs and ZGNRs. To further understand the practical implications, we explore the transport properties of finite CZGNRs when connected to electrodes through line contacts. The presence of edge defects introduces intriguing asymmetries in the tunneling current, leading to a significant reduction in its magnitude. Notably, we observe that the saturation current magnitude is less influenced by the length of CZGNRs and is instead more sensitive to the choice of materials used for the contacted electrodes. Lastly, we investigate the tunneling currents through GQDs featuring boron nitride textures within the Coulomb blockade region, unveiling an irregular staircase-like pattern in the tunneling current behavior.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Thermal rectification through the topological states of asymmetrical length armchair graphene nanoribbons heterostructures with vacancies
Authors:
David M T Kuo
Abstract:
We present a theoretical investigation of electron heat current in asymmetrical length armchair graphene nanoribbon (AGNR) heterostructures with vacancies, focusing on the topological states (TSs). In particular, we examine the 9-7-9 AGNR heterostructures where the TSs are well-isolated from the conduction and valence subbands. This isolation effectively mitigates thermal noise of subbands arising…
▽ More
We present a theoretical investigation of electron heat current in asymmetrical length armchair graphene nanoribbon (AGNR) heterostructures with vacancies, focusing on the topological states (TSs). In particular, we examine the 9-7-9 AGNR heterostructures where the TSs are well-isolated from the conduction and valence subbands. This isolation effectively mitigates thermal noise of subbands arising from temperature fluctuations during charge transport. Moreover, when the TSs exhibit an orbital off-set, intriguing electron heat rectification phenomena are observed, primarily attributed to inter-TS electron Coulomb interactions. To enhance the heat rectification ratio ($η_Q$), we manipulate the coupling strengths between the heat sources and the TSs by introducing asymmetrical lengths in the 9-AGNRs. This approach offers control over the rectification properties, enabling significant enhancements. Additionally, we introduce vacancies strategically positioned between the heat sources and the TSs to suppress phonon heat current. This arrangement effectively reduces the overall phonon heat current, while leaving the TSs unaffected. Our findings provide valuable insights into the behavior of electron heat current in AGNR heterostructures, highlighting the role of topological states, inter-TS electron Coulomb interactions, and the impact of structural modifications such as asymmetrical lengths and vacancy positioning. These results pave the way for the design and optimization of graphene-based devices with improved thermal management and efficient control of electron heat transport.
△ Less
Submitted 2 October, 2023; v1 submitted 12 September, 2023;
originally announced September 2023.
-
Effects of Coulomb blockade on the charge transport through the topological states of finite armchair graphene nanoribbons and heterostructures
Authors:
David M T Kuo
Abstract:
In this study, we investigate the charge transport properties of semiconducting armchair graphene nanoribbons (AGNRs) and heterostructures through their topological states (TSs), with a specific focus on the Coulomb blockade region. Our approach employs a two-site Hubbard model that takes into account both intra- and inter-site Coulomb interactions. Using this model, we calculate the electron ther…
▽ More
In this study, we investigate the charge transport properties of semiconducting armchair graphene nanoribbons (AGNRs) and heterostructures through their topological states (TSs), with a specific focus on the Coulomb blockade region. Our approach employs a two-site Hubbard model that takes into account both intra- and inter-site Coulomb interactions. Using this model, we calculate the electron thermoelectric coefficients and tunneling currents of serially coupled TSs (SCTSs). In the linear response regime, we analyze the electrical conductance ($G_e$), Seebeck coefficient ($S$), and electron thermal conductance ($κ_e$) of finite AGNRs. Our results reveal that at low temperatures, the Seebeck coefficient is more sensitive to many-body spectra than the electrical conductance. Furthermore, we observe that the optimized $S$ at high temperature is less sensitive to electron Coulomb interactions than $G_e$ and $κ_e$. In the nonlinear response regime, we observe a tunneling current with negative differential conductance through the SCTSs of finite AGNRs. This current is generated by electron inter-site Coulomb interactions rather than intra-site Coulomb interactions. Additionally, we observe current rectification behavior in asymmetrical junction systems of SCTSs of AGNRs. Notably, we also uncover the remarkable current rectification behavior of SCTSs of 9-7-9 AGNR heterostructure in the Pauli spin blockade configuration. Overall, our study provides valuable insights into the charge transport properties of TSs in finite AGNRs and heterostructures. We emphasize the importance of considering electron-electron interactions in understanding the behavior of these materials.
△ Less
Submitted 22 July, 2023;
originally announced July 2023.
-
Effects of metallic electrodes on the thermoelectric properties of zigzag graphene nanoribbons with periodic vacancies
Authors:
David M T Kuo
Abstract:
We theoretically analyze the thermoelectric properties of graphene quantum dot arrays (GQDAs) with line- or surface-contacted metal electrodes. Such GQDAs are realized as zigzag graphene nanoribbons (ZGNRs) with periodic vacancies. Gaps and minibands are formed in these GQDAs, which can have metallic and semiconducting phases. The electronic states of the first conduction (valence) miniband with n…
▽ More
We theoretically analyze the thermoelectric properties of graphene quantum dot arrays (GQDAs) with line- or surface-contacted metal electrodes. Such GQDAs are realized as zigzag graphene nanoribbons (ZGNRs) with periodic vacancies. Gaps and minibands are formed in these GQDAs, which can have metallic and semiconducting phases. The electronic states of the first conduction (valence) miniband with nonlinear dispersion may have long coherent lengths along the zigzag edge direction. With line-contacted metal electrodes, the GQDAs have the characteristics of serially coupled quantum dots (SCQDs) if the armchair edge atoms of the ZGNRs are coupled to the electrodes. By contrast, the GQDAs have the characteristics of parallel QDs if the zigzag edge atoms are coupled to the electrodes. The maximum thermoelectric power factors of SCQDs with line-contacted electrodes of Cu, Au, Pt, Pd, or Ti at room temperature were similar or greater than $0.186~nW/K$; their figures of merit were greater than three. GQDAs with line-contacted metal electrodes have much better thermoelectric performance than surface contacted metal electrodes.
△ Less
Submitted 5 May, 2023; v1 submitted 4 December, 2022;
originally announced December 2022.
-
Contact effects on thermoelectric properties of textured graphene nanoribbons
Authors:
David M T Kuo,
Yia-Chung Chang
Abstract:
Transport and thermoelectric properties of finite textured graphene nanoribbons (t-GNRs) connected to electrodes with various coupling strengths are theoretically studied in the framework of the tight-binding model and Green's function approach. Due to quantum constriction induced by the indented edges, such t-GNRs behave like serially-coupled graphene quantum dots (SGQDs). These types of SGQDs ca…
▽ More
Transport and thermoelectric properties of finite textured graphene nanoribbons (t-GNRs) connected to electrodes with various coupling strengths are theoretically studied in the framework of the tight-binding model and Green's function approach. Due to quantum constriction induced by the indented edges, such t-GNRs behave like serially-coupled graphene quantum dots (SGQDs). These types of SGQDs can be formed by tailoring zigzag GNRs (ZGNRs) or armchair GNRs (AGNRs). Their bandwidths and gaps can be engineered by varying the size of the quantum dot and the neck width at indented edges. Effects of defects and contact junction on electrical conductance, Seebeck coefficient and electron thermal conductance of t-GNRs are calculated. When a defect occurs in the interior site of textured ZGNRs (t-ZGNRs), the maximum power factor within the central gap or near the band edges is found to be insensitive to the defect scattering. Furthermore, we found that SGQDs formed by t-ZGNRs have significantly better electrical power outputs than those of textured ANGRs due to the improved functional shape of the transmission coefficient in t-ZGNRs. With a proper design of contact the maximum power factor ( figure of merit) of t-ZGNRs could reach $90\%$ ($95\%$) of the theoretical limit.
△ Less
Submitted 24 September, 2022; v1 submitted 23 August, 2022;
originally announced August 2022.
-
Humans plan for the near future to walk economically on uneven terrain
Authors:
Osman Darici,
Arthur D. Kuo
Abstract:
Humans experience small fluctuations in their gait when walking on uneven terrain. The fluctuations deviate from the steady, energy-minimizing pattern for level walking, and have no obvious organization. But humans often look ahead when they walk, and could potentially plan anticipatory fluctuations for the terrain. Such planning is only sensible if it serves some an objective purpose, such as mai…
▽ More
Humans experience small fluctuations in their gait when walking on uneven terrain. The fluctuations deviate from the steady, energy-minimizing pattern for level walking, and have no obvious organization. But humans often look ahead when they walk, and could potentially plan anticipatory fluctuations for the terrain. Such planning is only sensible if it serves some an objective purpose, such as maintaining constant speed or reducing energy expenditure, that is also attainable within finite planning capacity. Here we show that humans do plan and perform optimal control strategies on uneven terrain. Rather than maintain constant speed, they make purposeful, anticipatory speed adjustments that are consistent with minimizing energy expenditure. A simple optimal control model predicts economical speed fluctuations that agree well with experiments with humans (N = 12) walking on seven different terrain profiles (correlated with model ro=0.55+-0.11, P<0.05 all terrains). Participants made repeatable speed fluctuations starting about six to eight steps ahead of each terrain feature (up to +-7.5 cm height difference each step, up to 16 consecutive features). Nearer features matter more, because energy is dissipated with each succeeding step collision with ground, preventing momentum from persisting indefinitely. A finite horizon of continuous look ahead and motor working space thus suffice to practically optimize for any length of terrain. Humans reason about walking in the near future to plan complex optimal control sequences.
△ Less
Submitted 23 November, 2022; v1 submitted 16 July, 2022;
originally announced July 2022.
-
Effects of zigzag edge states on the thermoelectric properties of finite graphene nanoribbons
Authors:
David Ming Ting Kuo
Abstract:
Thermoelectric properties of finite graphene nanoribbons (GNRs) coupled to metallic electrodes are theoretically studied in the framework of tight-binding model and Green's function approach. When the zigzag sides are coupled to the electrodes, the electron transport through the localized edge states can occur only if the channel length between electrodes is smaller than the decay length of these…
▽ More
Thermoelectric properties of finite graphene nanoribbons (GNRs) coupled to metallic electrodes are theoretically studied in the framework of tight-binding model and Green's function approach. When the zigzag sides are coupled to the electrodes, the electron transport through the localized edge states can occur only if the channel length between electrodes is smaller than the decay length of these localized zigzag edge states. When the armchair edges are coupled to the electrodes, there is an interesting thermoelectric behavior associated with the mid-gap states when the GNR is in the semiconducting phase. Here we show that the thermoelectric behavior of zigzag edge states of GNRs with armchair sides connected to electrodes is similar to that of two parallel quantum dots with similar orbital degeneracy. Furthermore, it is demonstrated that the electrical conductance and power factor given by the zigzag edge states are quite robust against the defect scattering.
△ Less
Submitted 8 July, 2022; v1 submitted 9 April, 2022;
originally announced April 2022.
-
X-ray Nano-imaging of Defects in Thin Film Catalysts via Cluster Analysis
Authors:
Aileen Luo,
Oleg Yu. Gorobtsov,
Jocienne N. Nelson,
Ding-Yuan Kuo,
Ziming Shao,
Ryan Bouck,
Mathew Cherukara,
Martin V. Holt,
Kyle M. Shen,
Darrell G. Schlom,
** Suntivich,
Andrej Singer
Abstract:
Functional properties of transition-metal oxides strongly depend on crystallographic defects. In transition-metal-oxide electrocatalysts such as SrIrO3 (SIO), crystallographic lattice deviations can affect ionic diffusion and adsorbate binding energies. Scanning x-ray nanodiffraction enables imaging of local structural distortions across an extended spatial region of thin samples. Line defects rem…
▽ More
Functional properties of transition-metal oxides strongly depend on crystallographic defects. In transition-metal-oxide electrocatalysts such as SrIrO3 (SIO), crystallographic lattice deviations can affect ionic diffusion and adsorbate binding energies. Scanning x-ray nanodiffraction enables imaging of local structural distortions across an extended spatial region of thin samples. Line defects remain challenging to detect and localize using nanodiffraction, due to their weak diffuse scattering. Here we apply an unsupervised machine learning clustering algorithm to isolate the low-intensity diffuse scattering in as-grown and alkaline-treated thin epitaxially strained SIO films. We pinpoint the defect locations, find additional strain variation in the morphology of electrochemically cycled SIO, and interpret the defect type by analyzing the diffraction profile through clustering. Our findings demonstrate the use of a machine learning clustering algorithm for identifying and characterizing hard-to-find crystallographic defects in thin films of electrocatalysts and highlight the potential to study electrochemical reactions at defect sites in operando experiments.
△ Less
Submitted 9 January, 2023; v1 submitted 18 March, 2022;
originally announced March 2022.
-
Adaptive Contrast for Image Regression in Computer-Aided Disease Assessment
Authors:
Weihang Dai,
Xiaomeng Li,
Wan Hang Keith Chiu,
Michael D. Kuo,
Kwang-Ting Cheng
Abstract:
Image regression tasks for medical applications, such as bone mineral density (BMD) estimation and left-ventricular ejection fraction (LVEF) prediction, play an important role in computer-aided disease assessment. Most deep regression methods train the neural network with a single regression loss function like MSE or L1 loss. In this paper, we propose the first contrastive learning framework for d…
▽ More
Image regression tasks for medical applications, such as bone mineral density (BMD) estimation and left-ventricular ejection fraction (LVEF) prediction, play an important role in computer-aided disease assessment. Most deep regression methods train the neural network with a single regression loss function like MSE or L1 loss. In this paper, we propose the first contrastive learning framework for deep image regression, namely AdaCon, which consists of a feature learning branch via a novel adaptive-margin contrastive loss and a regression prediction branch. Our method incorporates label distance relationships as part of the learned feature representations, which allows for better performance in downstream regression tasks. Moreover, it can be used as a plug-and-play module to improve performance of existing regression methods. We demonstrate the effectiveness of AdaCon on two medical image regression tasks, ie, bone mineral density estimation from X-ray images and left-ventricular ejection fraction prediction from echocardiogram videos. AdaCon leads to relative improvements of 3.3% and 5.9% in MAE over state-of-the-art BMD estimation and LVEF prediction methods, respectively.
△ Less
Submitted 22 December, 2021;
originally announced December 2021.
-
High thermoelectric figure of merit of quantum dot array quantum wires
Authors:
David M T Kuo
Abstract:
How to design silicon-based quantum wires with figure of merit ($ZT$) larger than three is under hot pursuit due to the advantage of low cost and the availability of matured fabrication technique. Quantum wires consisting of finite three dimensional quantum dot (QD) arrays coupled to electrodes are proposed to realize high efficient thermoelectric devices with optimized power factors. The transmis…
▽ More
How to design silicon-based quantum wires with figure of merit ($ZT$) larger than three is under hot pursuit due to the advantage of low cost and the availability of matured fabrication technique. Quantum wires consisting of finite three dimensional quantum dot (QD) arrays coupled to electrodes are proposed to realize high efficient thermoelectric devices with optimized power factors. The transmission coefficient of 3D QD arrays can exhibit 3D, 2D, 1D and 0D topological distribution functions by tailoring the interdot coupling strengths. Such topological effects on the thermoelectric properties are revealed. The 1D topological distribution function shows the maximum power factor and the best $ZT$ value. We have demonstrated that 3D silicon QD array nanowires with diameters below $20~nm$ and length $250~nm$ show high potential to achieve $ZT\ge 3$ near room temperature.
△ Less
Submitted 2 June, 2021; v1 submitted 29 April, 2021;
originally announced April 2021.
-
Thermoelectric properties of finite two dimensional triangular lattices coupled to electrodes
Authors:
David M T Kuo
Abstract:
Novel intrinsic two-dimensional materials have attracted many researchers' attention. The unusual transport and optical properties of these materials originate mainly from triangular lattices (TLs). Therefore, the application of energy harvesting calls for a study of the thermoelectric properties of 2D TLs coupled to electrodes. The transmission coefficient of 2D TLs is calculated by using the Gre…
▽ More
Novel intrinsic two-dimensional materials have attracted many researchers' attention. The unusual transport and optical properties of these materials originate mainly from triangular lattices (TLs). Therefore, the application of energy harvesting calls for a study of the thermoelectric properties of 2D TLs coupled to electrodes. The transmission coefficient of 2D TLs is calculated by using the Green's function technique to treat ballistic transports. Especially important among our findings is the electron-hole asymmetric behavior of the power factor ($PF$). Specifically, the maximum $PF$ of electrons is significantly larger than that of holes. At room temperature, the maximum $PF$ of electrons is dictated by the position of the chemical potential of electrodes near the band edge of TLs. The enhancement of $PF$ with increasing electronic states results from the enhancement of electrical conductance and constant Seebeck coefficient. When the band gap is ten times larger than the thermal energy, it is appropriate to make one-band model predictions for thermoelectric optimization.
△ Less
Submitted 24 September, 2020;
originally announced September 2020.
-
A Variational Approach to Unsupervised Sentiment Analysis
Authors:
Ziqian Zeng,
Wenxuan Zhou,
Xin Liu,
Zizheng Lin,
Yangqin Song,
Michael David Kuo,
Wan Hang Keith Chiu
Abstract:
In this paper, we propose a variational approach to unsupervised sentiment analysis. Instead of using ground truth provided by domain experts, we use target-opinion word pairs as a supervision signal. For example, in a document snippet "the room is big," (room, big) is a target-opinion word pair. These word pairs can be extracted by using dependency parsers and simple rules. Our objective function…
▽ More
In this paper, we propose a variational approach to unsupervised sentiment analysis. Instead of using ground truth provided by domain experts, we use target-opinion word pairs as a supervision signal. For example, in a document snippet "the room is big," (room, big) is a target-opinion word pair. These word pairs can be extracted by using dependency parsers and simple rules. Our objective function is to predict an opinion word given a target word while our ultimate goal is to learn a sentiment classifier. By introducing a latent variable, i.e., the sentiment polarity, to the objective function, we can inject the sentiment classifier to the objective function via the evidence lower bound. We can learn a sentiment classifier by optimizing the lower bound. We also impose sophisticated constraints on opinion words as regularization which encourages that if two documents have similar (dissimilar) opinion words, the sentiment classifiers should produce similar (different) probability distribution. We apply our method to sentiment analysis on customer reviews and clinical narratives. The experiment results show our method can outperform unsupervised baselines in sentiment analysis task on both domains, and our method obtains comparable results to the supervised method with hundreds of labels per aspect in customer reviews domain, and obtains comparable results to supervised methods in clinical narratives domain.
△ Less
Submitted 21 August, 2020;
originally announced August 2020.
-
Thermoelectric properties of finite two-dimensional quantum dot arrays with band-like electronic states
Authors:
David M T Kuo
Abstract:
The thermal power ($PF=S^2G_e$) depends on the Seebeck coefficient ($S$) and electron conductance ($G_e$). The enhancement of $G_e$ will unavoidably suppress $S$ because they are closely related. As a consequence, the optimization of $PF$ is extremely difficult. Here, we theoretically investigated the thermoelectric properties of two-dimensional quantum dot (QD) arrays with carriers injected from…
▽ More
The thermal power ($PF=S^2G_e$) depends on the Seebeck coefficient ($S$) and electron conductance ($G_e$). The enhancement of $G_e$ will unavoidably suppress $S$ because they are closely related. As a consequence, the optimization of $PF$ is extremely difficult. Here, we theoretically investigated the thermoelectric properties of two-dimensional quantum dot (QD) arrays with carriers injected from electrodes. The Lorenz number of 2D QD arrays in the resonant tunneling procedure satisfies the Wiedemann-Franz law, which confirms the formation of minibands. When the miniband center is far away from the Fermi level of the electrodes, the electron transport is in the thermionic-assisted tunneling procedure (TATP). In this regime, $G_e$ in band-like situation and $S$ in atom-like situation can happen simultaneously. We have demonstrated that the enhancement of $G_e$ with an increasing number of electronic states will not suppress $S$ in the TATP.
△ Less
Submitted 24 May, 2020;
originally announced May 2020.
-
Thermoelectric and electron heat rectification properties of quantum dot superlattice nanowire arrays
Authors:
David M T Kuo
Abstract:
Heat engines made of quantum-dot (QD) superlattice nanowires (SLNWs) offer promising applications in energy harvesting due to the reduction of phonon thermal conductivity. In solid state electrical generators (refrigerators), one needs to generate (remove) large amount of charge current (heat current). Consequently, a high QD SLNW density is required for realistic applications. This study theoreti…
▽ More
Heat engines made of quantum-dot (QD) superlattice nanowires (SLNWs) offer promising applications in energy harvesting due to the reduction of phonon thermal conductivity. In solid state electrical generators (refrigerators), one needs to generate (remove) large amount of charge current (heat current). Consequently, a high QD SLNW density is required for realistic applications. This study theoretically investigated the properties of power factor and electron heat rectification for an SLNW array under the transition from a one dimensional system to a two dimensional system. The SLNW arrays show the functionality of heat diodes, which is mainly attributed to a transmission coefficient with a temperature-bias direction dependent characteristic.
△ Less
Submitted 29 March, 2020;
originally announced March 2020.
-
Superlattice nanowire heat engines with direction-dependent power output and heat current
Authors:
David M T Kuo,
Yia-Chung Chang
Abstract:
Heat engines (HEs) made of low dimensional structures offer promising applications in energy harvesting due to their reduced phonon thermal conductance. Many efforts have been devoted to the design of HEs made of quantum-dot (QD) superlattice nanowire (SLNW), but only SLNWs with uniform energy levels in QDs were considered. Here we propose a HE made of SLNW with staircase-like QD energy levels. It…
▽ More
Heat engines (HEs) made of low dimensional structures offer promising applications in energy harvesting due to their reduced phonon thermal conductance. Many efforts have been devoted to the design of HEs made of quantum-dot (QD) superlattice nanowire (SLNW), but only SLNWs with uniform energy levels in QDs were considered. Here we propose a HE made of SLNW with staircase-like QD energy levels. It is demonstrated that the nonlinear Seebeck effect can lead to significant electron transports for such a nanowire with staircase-like energy levels. The asymmetrical alignment of energy levels of quantum dots embedded in nanowires can be controlled to allow resonant electron transport under forward temperature bias, while they are in off-resonant regime under backward bias. Under such a mechanism,the power output and efficiency of such a SLNW are better than SLNWs with uniform QD energy levels. The SLNW HE has direction-dependent power output and heat current. In addition, the HE has the functionality of a heat diode with impressive negative differential thermal conductance under open circuit condition.
△ Less
Submitted 4 August, 2019; v1 submitted 15 April, 2019;
originally announced April 2019.
-
Optimizing thermoelectric efficiency of superlattice nanowires at room temperature
Authors:
David M T Kuo,
C. C. Chen,
Yia-Chung Chang
Abstract:
It is known that the figure of merit ($ZT$) of thin nanowires can be significantly enhanced at room temperature due to the reduction of phonon thermal conductance arising from the increase of boundary scattering of phonons. It is expected that the phonon thermal conductance of nanowires filled with quantum dots (QDs) will be further reduced. Here we consider a superlattice nanowire (SLNW) modeled…
▽ More
It is known that the figure of merit ($ZT$) of thin nanowires can be significantly enhanced at room temperature due to the reduction of phonon thermal conductance arising from the increase of boundary scattering of phonons. It is expected that the phonon thermal conductance of nanowires filled with quantum dots (QDs) will be further reduced. Here we consider a superlattice nanowire (SLNW) modeled by a linear chain of strongly coupled QDs connected to electrodes. We study the dependence of $ZT$ on the QD energy level ($E_0$) (relative to the Fermi level $E_F$ in the electrodes), inter-dot coupling strength ($t_c$), tunneling rate ($Γ$), and temperature $T$ in order to optimize the design. It is found that at room temperature the maximum power factor occurs when $(E_0-E_F)/k_BT \approx 2.4$ and $Γ=t_c$, a result almost independent of the number of QDs in SLNW as long as $t_c/k_BT <0.5$. By using reasonable physical parameters we show that thin SLNW with cross-sectional width near $3~nm$ has a potential to achieve $ZT\ge3$.
△ Less
Submitted 20 April, 2018; v1 submitted 19 April, 2018;
originally announced April 2018.
-
Heat diodes made of quantum dots embedded in nanowires connected to metallic electrodes
Authors:
David M T Kuo
Abstract:
The quantum dot arrays (QDAs) embedded into inhomogeneous nanowires connected to metallic electrodes show an electron heat rectification effect, which is attributed to the thermal voltage arising from a temperature bias and the QDA with a broken spatial inversion symmetry. The staircase energy levels of QDAs can be controlled to the resonant and off resonant transports for electrons in the forward…
▽ More
The quantum dot arrays (QDAs) embedded into inhomogeneous nanowires connected to metallic electrodes show an electron heat rectification effect, which is attributed to the thermal voltage arising from a temperature bias and the QDA with a broken spatial inversion symmetry. The staircase energy levels of QDAs can be controlled to the resonant and off resonant transports for electrons in the forward and backward temperature biases, respectively. The effect of electron Coulomb interactions on the rectification efficiency of heat diode is clarified by the case of double QDs. We find that it is important to reduce phonon heat currents for implementing a high efficient electron heat diode at high temperature.
△ Less
Submitted 20 June, 2017;
originally announced June 2017.
-
Large enhancement in thermoelectric efficiency of quantum dot junction due to increase of level degeneracy
Authors:
David M T Kuo,
Chih-Chieh Chen,
Yia-Chung Chang
Abstract:
It is theoretically demonstrated that the figure of merit ($ZT$) of quantum dot (QD) junctions can be significantly enhanced when the degree of degeneracy of the energy levels involved in electron transport is increased. The theory is based on the the Green-function approach in the Coulomb blockade regime by including all correlation functions resulting from electron-electron interactions associat…
▽ More
It is theoretically demonstrated that the figure of merit ($ZT$) of quantum dot (QD) junctions can be significantly enhanced when the degree of degeneracy of the energy levels involved in electron transport is increased. The theory is based on the the Green-function approach in the Coulomb blockade regime by including all correlation functions resulting from electron-electron interactions associated with the degenerate levels ($L$). We found that electrical conductance ($G_e$) as well as electron thermal conductance ($κ_e$) are highly dependent on the level degeneracy ($L$), whereas the Seebeck coefficient ($S$) is not. Therefore, the large enhancement of $ZT$ is mainly attributed to the increase of $G_e$ when the phonon thermal conductance ($κ_{ph}$) dominates the heat transport of QD junction system. In the serially coupled double-QD case, we also obtain a large enhancement of $ZT$ arising from higher $L$. Unlike $G_e$ and $κ_e$, $S$ is found almost independent on electron inter-dot hop** strength.
△ Less
Submitted 20 February, 2017; v1 submitted 16 January, 2017;
originally announced January 2017.
-
Thermoelectric efficiency of quantum dot molecules at a high temperature bias: the role of thermal-induced voltage
Authors:
Chih-Chieh Chen,
David M T Kuo,
Yia-Chung Chang
Abstract:
The nonlinear electron and heat currents of quantum dot molecules (QDMs) under a temperature bias are theoretically investigated, including all correlation functions arising from electron Coulomb interactions in QDMs. Unlike the case of double QDs, the maximum efficiency of serially coupled triple QDs (SCTQD) occurs in the orbital depletion regime owing to the interdot Coulomb blockade. The electr…
▽ More
The nonlinear electron and heat currents of quantum dot molecules (QDMs) under a temperature bias are theoretically investigated, including all correlation functions arising from electron Coulomb interactions in QDMs. Unlike the case of double QDs, the maximum efficiency of serially coupled triple QDs (SCTQD) occurs in the orbital depletion regime owing to the interdot Coulomb blockade. The electron current in SCTQD shows a bipolar oscillatory behavior with respect to the variation of QD energy levels, whereas the heat current does not show such a behavior. This is mainly attributed to thermal-induced bias. In addition, we illustrate how the efficiency of SCTQD is influenced by the external load resistance, and phonon heat flow. Finally, a direction-dependent electron current driven by a temperature bias has been demonstrated for a SCTQD with staircase-like energy levels.
△ Less
Submitted 12 December, 2016;
originally announced December 2016.
-
A heat engine made of quantum dot molecules with high figure of merits
Authors:
Chih-Chieh Chen,
David M T Kuo,
Yia-Chung Chang
Abstract:
The transport of electrons through serially coupled quantum dot molecules (SCQDM) is investigated theoretically for application as an energy harvesting engine (EHE), which converts thermal heat to electrical power. We demonstrate that the charge current driven by a temperature bias shows bipolar oscillatory behavior with respect to gate voltage due to the unbalance between electrons and holes, whi…
▽ More
The transport of electrons through serially coupled quantum dot molecules (SCQDM) is investigated theoretically for application as an energy harvesting engine (EHE), which converts thermal heat to electrical power. We demonstrate that the charge current driven by a temperature bias shows bipolar oscillatory behavior with respect to gate voltage due to the unbalance between electrons and holes, which is different from the charge current driven by an applied bias. In addition, we reveal a Lenz's law between the charge current and the thermal induced voltage. The efficiency of EHE is higher for SCQDM in the orbital depletion situation rather than the orbital filling situation, owing to the many-body effect. The EHE efficiency is enhanced with increasing temperature bias, but suppressed as the electron hop** strength reduces. The fluctuation of QD energy levels at different sites also leads to a reduction of EHE efficiency. Finally, we demonstrate direction-dependent charge currents driven by the temperature bias for application as a novel charge diode.
△ Less
Submitted 5 January, 2016;
originally announced January 2016.
-
Quantum interference and structure-dependent orbital-filling effects on the thermoelectric properties of quantum dot molecules
Authors:
Chih-Chieh Chen,
David M T Kuo,
Yia Chung Chang
Abstract:
The quantum interference and orbital filling effects on the thermoelectric (TE) properties of quantum dot molecules with high figure of merit are illustrated via the full solution to the Hubbard- Anderson model in the Coulomb blockade regime. It is found that under certain condition in the triangular QD molecule (TQDM), destructive quantum interference (QI) can occur, which leads to vanishing smal…
▽ More
The quantum interference and orbital filling effects on the thermoelectric (TE) properties of quantum dot molecules with high figure of merit are illustrated via the full solution to the Hubbard- Anderson model in the Coulomb blockade regime. It is found that under certain condition in the triangular QD molecule (TQDM), destructive quantum interference (QI) can occur, which leads to vanishing small electrical conductance, while the Seebeck coefficient is modified dramatically. When TQDM is in the charge localization state due to QI, the Seebeck coefficient is seriously suppressed at low temperature, but highly enhanced at high temperature. Meanwhile, the behavior of Lorenz number reveals that it is easier to block charge transport via destructive QI than the electron heat transport at high temperatures. The maximum power factor (PF) in TQDM occurs at full-filling condition. Nevertheless, low-filling condition is preferred for getting maximum PF in serially coupled triple QDs in general. In double QDs, the maximum PF can be achieved either with orbital-depletion or orbital-filling as a result of electron-hole symmetry. Our theoretical work provides a useful guideline for advancing the nanoscale TE technology.
△ Less
Submitted 30 June, 2015; v1 submitted 14 May, 2015;
originally announced May 2015.
-
Thermoelectric effects of quantum dot arrays embedded in nanowires
Authors:
Yen-Chun Tseng,
David M. -T. Kuo,
Yia-Chung Chang,
Chia-Wei Tsai
Abstract:
The thermoelectric properties of quantum dot arrays (QDAs) embedded in nanowires connected to electrodes are studied theoretically in the Coulomb blockade regime. A Hurbbard-Anderson model is used to simulate the electronic contribution to thermoelectric proper- ties of a QDA junction system. The electrical conductance, Seebeck coefficient, and electron thermal conductance are calculated by both t…
▽ More
The thermoelectric properties of quantum dot arrays (QDAs) embedded in nanowires connected to electrodes are studied theoretically in the Coulomb blockade regime. A Hurbbard-Anderson model is used to simulate the electronic contribution to thermoelectric proper- ties of a QDA junction system. The electrical conductance, Seebeck coefficient, and electron thermal conductance are calculated by both the Keldysh Green function method and the mean-field approach. The phonon thermal conductivities are calculated by using the equation of phonon radiative transfer method. In the Coulomb blockade regime the electron thermal conductance is much smaller than the phonon thermal conductance. Therefore, the optimal figure of merit (ZT) can be enhanced by increasing thermal power and decreasing phonon thermal conductance simultaneously. We found that it is possible to obtain ZT value of InGaAs/GaAs QDAs embedded in nanowires larger than one at room temperature.
△ Less
Submitted 6 July, 2015; v1 submitted 23 April, 2015;
originally announced April 2015.
-
Quantum interference and electron correlation in charge transport through triangular quantum dot molecules
Authors:
Chih-Chieh Chen,
Yia-chung Chang,
David M T Kuo
Abstract:
We study the charge transport properties of triangular quantum dot molecule (TQDM) connected to metallic electrodes, taking into account all correlation functions and relevant charging states. The quantum interference (QI) effect of TQDM resulting from electron coherent tunneling between quantum dots is revealed and well interpreted by the long distance coherent tunneling mechanism. The spectra of…
▽ More
We study the charge transport properties of triangular quantum dot molecule (TQDM) connected to metallic electrodes, taking into account all correlation functions and relevant charging states. The quantum interference (QI) effect of TQDM resulting from electron coherent tunneling between quantum dots is revealed and well interpreted by the long distance coherent tunneling mechanism. The spectra of electrical conductance of TQDM with charge filling from one to six electrons clearly depict the many-body and topological effects. The calculated charge stability diagram for conductance and total occupation numbers match well with the recent experimental measurements. We also demonstrate that the destructive QI effect on the tunneling current of TQDM is robust with respect to temperature variation, making the single electron QI transistor feasible at higher temperatures.
△ Less
Submitted 29 January, 2015;
originally announced January 2015.
-
Long distance coherent tunneling effect on the charge and heat currents in serially coupled triple quantum dots
Authors:
David M T Kuo,
Yia-chung Chang
Abstract:
The effect of long distance coherent tunneling (LDCT) on the charge and heat currents in serially coupled triple quantum dots (TQDs) connected to electrodes is illustrated by using a combination of the extended Hurbbard model and Anderson model. The charge and heat currents are calculated with a closed-form Landauer expression for the transmission coefficient suitable for the Coulomb blockade regi…
▽ More
The effect of long distance coherent tunneling (LDCT) on the charge and heat currents in serially coupled triple quantum dots (TQDs) connected to electrodes is illustrated by using a combination of the extended Hurbbard model and Anderson model. The charge and heat currents are calculated with a closed-form Landauer expression for the transmission coefficient suitable for the Coulomb blockade regime. The physical parameters including bias-dependent quantum dot energy levels, electron Coulomb interactions, and electron hop** strengths are calculated in the framework of effective mass theory for semiconductor TQDs. We demonstrate that the effect of LDCT on the charge and heat currents can be robust. In addition, it is shown that prominent heat rectification behavior can exist in the TQD system with asymmetrical energy levels.
△ Less
Submitted 12 March, 2014; v1 submitted 5 September, 2013;
originally announced September 2013.
-
Heat rectification effect of serially coupled quantum dots
Authors:
Yen-Chun Tseng,
David M T Kuo,
Yia-chung Chang,
Yan-Ting Lin
Abstract:
The nonlinear thermoelectric properties of serially coupled quantum dots (SCQDs) embedded in a nanowire connected to metallic electrodes are theoretically studied in the Coulomb blockade regime. We demonstrate that the electron heat current of SCQDs exhibit a direction-dependent behavior (heat rectification) in an asymmetrical structure in which the electron Coulomb interactions are significant. T…
▽ More
The nonlinear thermoelectric properties of serially coupled quantum dots (SCQDs) embedded in a nanowire connected to metallic electrodes are theoretically studied in the Coulomb blockade regime. We demonstrate that the electron heat current of SCQDs exhibit a direction-dependent behavior (heat rectification) in an asymmetrical structure in which the electron Coulomb interactions are significant. The phonon thermal conductivity of the nanowire is also calculated, which is used to estimate the phonon heat current. Finally, we discuss how to reduce phonon heat current to allow observation of electron heat rectification behavior in the SCQD junction system in low temperature regime ($\approx 3 K$).
△ Less
Submitted 13 July, 2013; v1 submitted 20 June, 2013;
originally announced June 2013.
-
Tunneling Current Spectra of a Metal Core/Semiconductor Shell Quantum Dot Molecule
Authors:
David M. -T. Kuo
Abstract:
The transport properties of a metal core/semiconductor shell quantum dot molecule (QDM) embedded in a matrix connected to metallic electrodes are theoretically studied in the framework of Keldysh Green function technique. The effects of the electron plasmon interactions (EPIs) on the tunneling current spectra of QDM are examined. The energy levels of the QDs, intradot and interdot Coulomb interact…
▽ More
The transport properties of a metal core/semiconductor shell quantum dot molecule (QDM) embedded in a matrix connected to metallic electrodes are theoretically studied in the framework of Keldysh Green function technique. The effects of the electron plasmon interactions (EPIs) on the tunneling current spectra of QDM are examined. The energy levels of the QDs, intradot and interdot Coulomb interactions, electron interdot hop** strengths, and tunneling rates of QDs are renormalized by the EPIs. The differential conductance spectra show peaks arising from the plasmon assisted tunneling process, intradot and interdot Coulomb interactions, and coherent tunneling between the QDs.
△ Less
Submitted 15 April, 2013;
originally announced April 2013.
-
Current Rectification and Seebeck Coefficient of Serially Coupled Double Quantum Dots
Authors:
Yen-Chun Tseng,
David M. -T. Kuo
Abstract:
The transport properties of serially coupled quantum dots (SCQDs) embedded in a matrix connected to metallic electrodes are theoretically studied in the linear and nonlinear regimes. The current rectification and negative differential conductance of SCQDs under the Pauli spin blockade condition are attributed to the combination of bias-direction dependent probability weight and off-resonant energy…
▽ More
The transport properties of serially coupled quantum dots (SCQDs) embedded in a matrix connected to metallic electrodes are theoretically studied in the linear and nonlinear regimes. The current rectification and negative differential conductance of SCQDs under the Pauli spin blockade condition are attributed to the combination of bias-direction dependent probability weight and off-resonant energy levels yielded by the applied bias across the junctions. We observe the spin-polarization current rectification under the Zeeman effect. The maximum spin-polarization current occurs in the forward bias regime. Such behavior is different from the charge current rectification. Finally, the Seebeck coefficient ($S$)of SCQDs is calculated and analyzed in the cases without and with electron phonon interactions. The application of SCQDs as a temperature detector is discussed on the basis of the nonlinear behavior of $S$ with respect to temperature difference across the junction.
△ Less
Submitted 7 December, 2012;
originally announced December 2012.
-
Thermoelectric Properties of a Semiconductor Quantum Dot Chain Connected to Metallic Electrodes
Authors:
David M. -T. Kuo,
Yia-Chung Chang
Abstract:
The thermoelectric properties of a semiconduct quantum dot chain (SQDC) connected to metallic electrodes are theoretically investigated in the Coulomb blockade regime. An extended Hubbard model is employed to simulate the SQDC system consisted of {\color{blue}N=2,3,4, and 5} quantum dots (QDs). The charge and heat currents are calculated in the framework of Keldysh Green's function technique. We o…
▽ More
The thermoelectric properties of a semiconduct quantum dot chain (SQDC) connected to metallic electrodes are theoretically investigated in the Coulomb blockade regime. An extended Hubbard model is employed to simulate the SQDC system consisted of {\color{blue}N=2,3,4, and 5} quantum dots (QDs). The charge and heat currents are calculated in the framework of Keldysh Green's function technique. We obtained a closed-form Landauer expression for the transmission coefficient of the SQDC system with arbitrary number of QDs by using the method beyond mean-field theory. The electrical conductance ($G_e$), Seebeck coefficient (S), thermal conductance, and figure of merit (ZT) are numerically calculated and analyzed in the linear response regime. When thermal conductance is dominated by phonon carriers, the optimization of ZT is determined by the power factor ($pF=S^2G_e$). We find that the optimization of ZT value favors the following conditions:(1) QDs with low energy level fluctuations, (2) QD energy levels lie above the Fermi level of electrodes, (3) $Γ< t_c \ll U_0$, where $t_c$, $U_0$, and $Γ$ are electron interdot hop** strength, on-site electron Coulomb interaction, and tunneling rate, respectively, and (4) $Γ_L=Γ_R$ with $Γ_L+Γ_R$ kept constant, where $Γ_L (Γ_R)$ is the left (right) tunneling rate. It is predicted that high ZT values can be achieved by tailoring above conditions.
△ Less
Submitted 10 January, 2013; v1 submitted 3 September, 2012;
originally announced September 2012.
-
Bistability in the Tunnelling Current through a Ring of $N$ Coupled Quantum Dots
Authors:
Shiue-Yuan Shiau,
Yia-Chung Chang,
David M. -T. Kuo
Abstract:
We study bistability in the electron transport through a ring of N coupled quantum dots with two orbitals in each dot. One orbital is localized (called b orbital) and coupling of the b orbitals in any two dots is negligible; the other is delocalized in the plane of the ring (called d orbital), due to coupling of the d orbitals in the neighboring dots, as described by a tight-binding model. The d o…
▽ More
We study bistability in the electron transport through a ring of N coupled quantum dots with two orbitals in each dot. One orbital is localized (called b orbital) and coupling of the b orbitals in any two dots is negligible; the other is delocalized in the plane of the ring (called d orbital), due to coupling of the d orbitals in the neighboring dots, as described by a tight-binding model. The d orbitals thereby form a band with finite width. The b and d orbitals are connected to the source and drain electrodes with a voltage bias V, allowing the electron tunnelling. Tunnelling current is calculated by using a nonequilibrium Green function method recently developed to treat nanostructures with multiple energy levels. We find a bistable effect in the tunnelling current as a function of bias V, when the size N>50; this effect scales with the size N and becomes sizable at N~100. The temperature effect on bistability is also discussed. In comparison, mean-field treatment tends to overestimate the bistable effect.
△ Less
Submitted 26 May, 2012;
originally announced May 2012.
-
Effects of interdot hop** and Coulomb blockade on the thermoelectric properties of serially coupled quantum dots
Authors:
David M. -T. Kuo,
Y. C. Chang
Abstract:
We have theoretically studied the thermoelectric properties of serially coupled quantum dots (SCQD) embedded in an insulator matrix connected to metallic electrodes. In the framework of Keldysh Green's function technique, the Landauer formula of transmission factor is obtained by using the equation of motion method. Based on such analytical expressions of charge and heat currents, we calculate the…
▽ More
We have theoretically studied the thermoelectric properties of serially coupled quantum dots (SCQD) embedded in an insulator matrix connected to metallic electrodes. In the framework of Keldysh Green's function technique, the Landauer formula of transmission factor is obtained by using the equation of motion method. Based on such analytical expressions of charge and heat currents, we calculate the electrical conductance, Seebeck coefficient, electron thermal conductance and figure of merit (ZT) of SCQD in the linear response regime. The effects of electron Coulomb interactions on the reduction and enhancement of ZT are analyzed. We demonstrate that ZT is not a monotonic increasing function of interdot electron hop** strength ($t_c$). We also show that in the absence of phonon thermal conductance, SCQD can reach the Carnot efficiency as $t_c$ approaches zero.
△ Less
Submitted 15 December, 2012; v1 submitted 4 January, 2012;
originally announced January 2012.
-
Bipolar thermoelectric effect in a srially coupled quantum dot system
Authors:
David M. -T. Kuo,
Yia-chung Chang
Abstract:
The Seebeck coefficient (S) of a serially coupled quantum dot (SCQD) junction system is theoretically studied via a two-level Anderson model. A change of sign in S with respect to temperature is found, which arises from the competition between tunneling currents due to electrons and holes (i.e, bipolar tunneling effect). The change of sign in S implies that one can vary the equilibrium temperature…
▽ More
The Seebeck coefficient (S) of a serially coupled quantum dot (SCQD) junction system is theoretically studied via a two-level Anderson model. A change of sign in S with respect to temperature is found, which arises from the competition between tunneling currents due to electrons and holes (i.e, bipolar tunneling effect). The change of sign in S implies that one can vary the equilibrium temperature to produce thermoelectric current in either the forward or reverse direction, leading to a bipolar thermoelectric effect. For the case of two parallel SCQDs, we also observe the oscillatory behavior of S with respect to temperature.
△ Less
Submitted 1 November, 2011; v1 submitted 13 April, 2011;
originally announced April 2011.
-
Theory of spin blockade, charge ratchet effect, and thermoelectrical behavior in serially coupled quantum-dot system
Authors:
David M. -T. Kuo,
Shiue-Yuan,
Yia-chung Chang
Abstract:
The charge transport of a serially coupled quantum dots (SCQD) connected to the metallic electrodes is theoretically investigated in the Coulomb blockade regime. A closed-form expression for the tunneling current of SCQD in the {\color{red} weak interdot hop**} limit is obtained by solving an extended two-site Hubbard model via the Green's function method. We use this expression to investigate s…
▽ More
The charge transport of a serially coupled quantum dots (SCQD) connected to the metallic electrodes is theoretically investigated in the Coulomb blockade regime. A closed-form expression for the tunneling current of SCQD in the {\color{red} weak interdot hop**} limit is obtained by solving an extended two-site Hubbard model via the Green's function method. We use this expression to investigate spin current rectification, negative differential conductance, and coherent tunneling in the nonlinear response regime. The current rectification arising from the space symmetry breaking of SCQD is suppressed by increasing temperature. The calculation of SCQD is extended to the case of multiple parallel SCQDs for studying the charge ratchet effect and SCQD with multiple levels. In the linear response regime, the functionalities of spin filter and low-temperature current filter are demonstrated to coexist in this system. It is further demonstrated that two-electron spin singlet and triplet states can be readily resolved from the measurement of Seebeck coefficient rather than that of electrical conductance.
△ Less
Submitted 29 October, 2011; v1 submitted 30 January, 2011;
originally announced January 2011.
-
Thermal rectification effects of multiple semiconductor quantum dot junctions
Authors:
David M T Kuo
Abstract:
Based on the multiple energy level Anderson model, this study theoretically examines the thermoelectric effects of semiconductor quantum dots (QDs) in the nonlinear response regime. The charge and heat currents in the sequential tunneling process are calculated by using the Keldysh Green's function technique. Results show that the thermal rectification effect can be observed in a multiple QD junct…
▽ More
Based on the multiple energy level Anderson model, this study theoretically examines the thermoelectric effects of semiconductor quantum dots (QDs) in the nonlinear response regime. The charge and heat currents in the sequential tunneling process are calculated by using the Keldysh Green's function technique. Results show that the thermal rectification effect can be observed in a multiple QD junction system, whereas the tunneling rate, size fluctuation, and location distribution of QD significantly influence the rectification efficiency.
△ Less
Submitted 17 April, 2010;
originally announced April 2010.
-
Thermoelectric and thermal rectification properties of quantum dot junctions
Authors:
David M. -T. Kuo,
Yia-chung Chang
Abstract:
The electrical conductance, thermal conductance, thermal power and figure of merit (ZT) of semiconductor quantum dots (QDs) embedded into an insulator matrix connected with metallic electrodes are theoretically investigated in the Coulomb blockade regime. The multilevel Anderson model is used to simulate the multiple QDs junction system. The charge and heat currents in the sequential tunneling p…
▽ More
The electrical conductance, thermal conductance, thermal power and figure of merit (ZT) of semiconductor quantum dots (QDs) embedded into an insulator matrix connected with metallic electrodes are theoretically investigated in the Coulomb blockade regime. The multilevel Anderson model is used to simulate the multiple QDs junction system. The charge and heat currents in the sequential tunneling process are calculated by the Keldysh Green function technique. In the linear response regime the ZT values are still very impressive in the small tunneling rates case, although the effect of electron Coulomb interaction on ZT is significant. In the nonlinear response regime, we have demonstrated that the thermal rectification behavior can be observed for the coupled QDs system, where the very strong asymmetrical coupling between the dots and electrodes, large energy level separation between dots and strong interdot Coulomb interactions are required.
△ Less
Submitted 21 February, 2010;
originally announced February 2010.
-
Thermal rectification properties of multiple-quantum-dot junctions
Authors:
David M. -T. Kuo,
Yia-chung Chang
Abstract:
It is illustrated that semiconductor quantum dots (QDs) embedded into an insulating matrix connected with metallic electrodes and some vacuum space can lead to significant thermal rectification effect. A multilevel Anderson model is used to investigate the thermal rectification properties of the multiple-QD junction. The charge and heat currents in the tunneling process are calculated via the Ke…
▽ More
It is illustrated that semiconductor quantum dots (QDs) embedded into an insulating matrix connected with metallic electrodes and some vacuum space can lead to significant thermal rectification effect. A multilevel Anderson model is used to investigate the thermal rectification properties of the multiple-QD junction. The charge and heat currents in the tunneling process are calculated via the Keldysh Green's function technique. We show that pronounced thermal rectification and negative differential thermal conductance (NDTC) behaviors can be observed for the multiple-QD junction with asymmetrical tunneling rates and strong interdot Coulomb interactions.
△ Less
Submitted 8 January, 2010;
originally announced January 2010.
-
Bistable states of quantum dot array junctions for high-density memory
Authors:
David M. -T. Kuo,
Yia-Chung Chang
Abstract:
We demonstrate that two-dimensional (2D) arrays of coupled quantum dots (QDs) with six-fold degenerate p orbitals can display bistable states, suitable for application in high-density memory device with low power consumption. Due to the inter-dot coupling of $p_x$ and $p_y$ orbitals in these QD arrays, two dimensional conduction bands can be formed in the x-y plane, while the $p_z$ orbitals rema…
▽ More
We demonstrate that two-dimensional (2D) arrays of coupled quantum dots (QDs) with six-fold degenerate p orbitals can display bistable states, suitable for application in high-density memory device with low power consumption. Due to the inter-dot coupling of $p_x$ and $p_y$ orbitals in these QD arrays, two dimensional conduction bands can be formed in the x-y plane, while the $p_z$ orbitals remain localized in the x-y plane such that the inter-dot coupling between them can be neglected. We model such systems by taking into account the on-site repulsive interactions between electrons in $p_z$ orbitals and the coupling of the localized $p_z$ orbitals with the 2D conduction bands formed by $p_x$ and $p_y$ orbitals. The Green's function method within an extended Anderson model is used to calculate the tunneling current through the QDs. We find that bistable tunneling current can exist for such systems due to the interplay of the on-site Coulomb interactions (U) between the $p_z$ orbitals and the delocalized nature of conduction band states derived from the hybridization of $p_x$ / $p_y$ orbitals. This bistable current is not sensitive to the detailed band structure of the two dimensional band, but depends critically on the strength of $U$ and the ratio of the left and right tunneling rates. The behavior of the electrical bistability can be sustained when the 2D QD array reduces to a one-dimensional QD array, indicating the feasibility for high-density packing of these bistable nanoscale structures.
△ Less
Submitted 28 December, 2008;
originally announced December 2008.
-
Tunneling current spectroscopy of a nanostructure junction involving multiple energy levels
Authors:
David M. -T. Kuo,
Yia-Chung Chang
Abstract:
A multi-level Anderson model is employed to simulate the system of a nanostructure tunnel junction with any number of one-particle energy levels. The tunneling current, including both shell-tunneling and shell-filling cases, is theoretically investigated via the nonequilibrium Green's function method. We obtain a closed form for the spectral function, which is used to analyze the complicated tun…
▽ More
A multi-level Anderson model is employed to simulate the system of a nanostructure tunnel junction with any number of one-particle energy levels. The tunneling current, including both shell-tunneling and shell-filling cases, is theoretically investigated via the nonequilibrium Green's function method. We obtain a closed form for the spectral function, which is used to analyze the complicated tunneling current spectra of a quantum dot or molecule embedded in a double-barrier junction. We also show that negative differential conductance can be observed in a quantum dot tunnel junction when the Coulomb interactions with neighboring quantum dots are taken into account.
△ Less
Submitted 5 February, 2007;
originally announced February 2007.
-
Isolation Support for Service-based Applications: A Position Paper
Authors:
Paul Greenfield,
Alan Fekete,
Julian Jang,
Dean Kuo,
Surya Nepal
Abstract:
In this paper, we propose an approach to providing the benefits of isolation in service-oriented applications where it is not feasible to hold traditional locks for ACID transactions. Our technique, called "Promises", provides an uniform view for clients which covers a wide range of implementation techniques on the service side, all allowing the client to check a condition and then later rely on…
▽ More
In this paper, we propose an approach to providing the benefits of isolation in service-oriented applications where it is not feasible to hold traditional locks for ACID transactions. Our technique, called "Promises", provides an uniform view for clients which covers a wide range of implementation techniques on the service side, all allowing the client to check a condition and then later rely on that condition still holding.
△ Less
Submitted 21 December, 2006;
originally announced December 2006.
-
Light emitting single electron transistors
Authors:
David M. -T. Kuo,
Yia-chung Chang
Abstract:
The dynamic properties of light-emitting single-electron transistors (LESETs) made from quantum dots are theoretically studied by using nonequilibrium Green's function method. Holes residing at QD created by small ac signals added in the base electrode of valence band lead to the exciton assisted tunnelling level for the electron tunnelling from emitter to collector, it is therefore such small s…
▽ More
The dynamic properties of light-emitting single-electron transistors (LESETs) made from quantum dots are theoretically studied by using nonequilibrium Green's function method. Holes residing at QD created by small ac signals added in the base electrode of valence band lead to the exciton assisted tunnelling level for the electron tunnelling from emitter to collector, it is therefore such small signals can be amplified. LESETs can be employed as efficient single-photon detectors.
△ Less
Submitted 22 June, 2006; v1 submitted 3 June, 2006;
originally announced June 2006.
-
Light-emitting current of electrically driven single-photon sources
Authors:
David M. -T. Kuo
Abstract:
The time-dependent tunnelling current arising from the electron-hole recombination of exciton state is theoretically studied using the nonequilibrium Green's function technique and the Anderson model with two energy levels. The charge conservation and gauge invariance are satisfied in the tunnelling current. Apart from the classical capacitive charging and discharging behavior, interesting oscil…
▽ More
The time-dependent tunnelling current arising from the electron-hole recombination of exciton state is theoretically studied using the nonequilibrium Green's function technique and the Anderson model with two energy levels. The charge conservation and gauge invariance are satisfied in the tunnelling current. Apart from the classical capacitive charging and discharging behavior, interesting oscillations superimpose on the tunnelling current for the applied rectangular pulse voltage.
△ Less
Submitted 19 May, 2006; v1 submitted 10 May, 2006;
originally announced May 2006.
-
Transient tunneling current of single electron transistors
Authors:
David M. -T. Kuo,
Pei-Wen Li,
W. T. Lai
Abstract:
The transient tunneling current of single electron transistors (SETs) is theoretically investigated. The time-dependent current formula given by Jauho, Wingreen and Meir [Phys. Rev. B 50, 5528 (1994)] is applied to study the temperature effect on the transient current through a single quantum dot embedded into asymmetry barrier. It is found that the tunneling rate ratio significantly influences…
▽ More
The transient tunneling current of single electron transistors (SETs) is theoretically investigated. The time-dependent current formula given by Jauho, Wingreen and Meir [Phys. Rev. B 50, 5528 (1994)] is applied to study the temperature effect on the transient current through a single quantum dot embedded into asymmetry barrier. It is found that the tunneling rate ratio significantly influences the feature of transient current. Finally, the oscillation structures on the exponential growth transient current of single hole transistors composed of germanium quantum dots is analyzed.
△ Less
Submitted 16 December, 2005;
originally announced December 2005.
-
Fano interference effect on the transition spectrum of single electron transistors
Authors:
David M. -T. Kuo
Abstract:
We theoretically study the intraband transition spectrum of single electron transistors (SETs) composed of individual self-assembled quantum dots. The polarization of SETs is obtained by using the nonequilibrium Green's function technique and the Anderson model with three energy levels. Owing to nonradiative coupling between two excited states through the continuum of electrodes, the Fano interf…
▽ More
We theoretically study the intraband transition spectrum of single electron transistors (SETs) composed of individual self-assembled quantum dots. The polarization of SETs is obtained by using the nonequilibrium Green's function technique and the Anderson model with three energy levels. Owing to nonradiative coupling between two excited states through the continuum of electrodes, the Fano interference effect significantly influences the peak position and intensity of infrared wavelength single-photon spectrum.
△ Less
Submitted 20 November, 2005;
originally announced November 2005.
-
Stark effect on the exciton complexes of individual quantum dots
Authors:
David M. -T. Kuo,
Yia-Chung Chang
Abstract:
The emission spectrum of exciton complexes formed in individual self-assembled quantum dots (QDs) embedded into a p-n junction is theoretically studied using an effective mass model. We calculate the particle Coulomb interactions, eletron-hole overlaps and transition energies of exciton complexes for the different strength and direction of electric field. Both redshifts and blueshifts are observ…
▽ More
The emission spectrum of exciton complexes formed in individual self-assembled quantum dots (QDs) embedded into a p-n junction is theoretically studied using an effective mass model. We calculate the particle Coulomb interactions, eletron-hole overlaps and transition energies of exciton complexes for the different strength and direction of electric field. Both redshifts and blueshifts are observed in exciton, trions and biexciton. The Stark effect may be applied to manipulate the spontaneous emission rate of individual QDs embedded in microcavities.
△ Less
Submitted 17 October, 2005;
originally announced October 2005.
-
Tunnelling current and emission spectrum of a single electron transistor under optical pum**
Authors:
David M. -T. Kuo,
Yia-Chung Chang
Abstract:
Theoretical studies of the tunnelling current and emission spectrum of a single electron transistor (SET) under optical pum** are presented. The calculation is performed via Keldysh Green's function method within the Anderson model with two energy levels. It is found that holes in the quantum dot (QD) created by optical pum** lead to new channels for the electron tunnelling from emitter to c…
▽ More
Theoretical studies of the tunnelling current and emission spectrum of a single electron transistor (SET) under optical pum** are presented. The calculation is performed via Keldysh Green's function method within the Anderson model with two energy levels. It is found that holes in the quantum dot (QD) created by optical pum** lead to new channels for the electron tunnelling from emitter to collector. As a consequence, an electron can tunnel through the QD via additional channels, characterized by the exciton, trion and biexciton states. It is found that the tunnelling current as a function of the gate voltage displays a series of sharp peaks and the spacing between these peaks can be used to determine the exciton binding energy as well as the electron-electron Coulomb repulsion energy. In addition, we show that the single-photon emission associated with the electron-hole recombination in the exciton complexes formed in the QD can be controlled both electrically and optically.
△ Less
Submitted 31 May, 2005;
originally announced June 2005.
-
Interdot Coulomb repulsion effect on the charge transport of parallel double single electron transistors
Authors:
David M. -T. Kuo,
P. W. Li
Abstract:
The charge transport behaviors of parallel double single electron transistors (SETs) are investigated by the Anderson model with two impurity levels. The nonequilibrium Keldysh Green's technique is used to calculate the current-voltage characteristics of system. For SETs implemented by quantum dots (QDs) embedded into a thin $SiO_2$ layer, the interdot Coulomb repulsion is more important than th…
▽ More
The charge transport behaviors of parallel double single electron transistors (SETs) are investigated by the Anderson model with two impurity levels. The nonequilibrium Keldysh Green's technique is used to calculate the current-voltage characteristics of system. For SETs implemented by quantum dots (QDs) embedded into a thin $SiO_2$ layer, the interdot Coulomb repulsion is more important than the interdot electron hop** as a result of high potential barrier height between QDs and $SiO_2$. We found that the interdot Coulomb repulsion not onlyleads to new resonant levels, but also creates negative differential conductances.
△ Less
Submitted 10 May, 2005;
originally announced May 2005.
-
Binding energy of exciton complexes determined by the tunneling current of single electron transistor under optical pum**
Authors:
David M T Kuo,
Yia-chun chang
Abstract:
We theoretically study the tunnelling current of a single electron transistor (SET) under optical pum**. It found that holes in the quantum dot(QD) created by optical pum** lead to new channels for the electrons tunnelling from emitter to collector. As a consequence, an electron can tunnel through the QD via additional channels, characterized by the exciton, trion and biexciton states. The b…
▽ More
We theoretically study the tunnelling current of a single electron transistor (SET) under optical pum**. It found that holes in the quantum dot(QD) created by optical pum** lead to new channels for the electrons tunnelling from emitter to collector. As a consequence, an electron can tunnel through the QD via additional channels, characterized by the exciton, trion and biexciton states. The binding energy of exciton complexes can be determined by the Coulomb oscillatory tunnelling current.
△ Less
Submitted 22 April, 2005;
originally announced April 2005.
-
Distance-two labelings of digraphs
Authors:
G. J. Chang,
J. -J. Chen,
D. Kuo,
S. C. Liaw
Abstract:
For positive integers $j\ge k$, an $L(j,k)$-labeling of a digraph $D$ is a function $f$ from $V(D)$ into the set of nonnegative integers such that $|f(x)-f(y)|\ge j$ if $x$ is adjacent to $y$ in $D$ and $|f(x)-f(y)|\ge k$ if $x$ is of distant two to $y$ in $D$. Elements of the image of $f$ are called labels. The $L(j,k)$-labeling problem is to determine the $\vecλ_{j,k}$-number $\vecλ_{j,k}(D)$…
▽ More
For positive integers $j\ge k$, an $L(j,k)$-labeling of a digraph $D$ is a function $f$ from $V(D)$ into the set of nonnegative integers such that $|f(x)-f(y)|\ge j$ if $x$ is adjacent to $y$ in $D$ and $|f(x)-f(y)|\ge k$ if $x$ is of distant two to $y$ in $D$. Elements of the image of $f$ are called labels. The $L(j,k)$-labeling problem is to determine the $\vecλ_{j,k}$-number $\vecλ_{j,k}(D)$ of a digraph $D$, which is the minimum of the maximum label used in an $L(j,k)$-labeling of $D$. This paper studies $\vecλ_{j,k}$- numbers of digraphs. In particular, we determine $\vecλ_{j,k}$- numbers of digraphs whose longest dipath is of length at most 2, and $\vecλ_{j,k}$-numbers of ditrees having dipaths of length 4. We also give bounds for $\vecλ_{j,k}$-numbers of bipartite digraphs whose longest dipath is of length 3. Finally, we present a linear-time algorithm for determining $\vecλ_{j,1}$-numbers of ditrees whose longest dipath is of length 3.
△ Less
Submitted 9 July, 2004;
originally announced July 2004.