-
Mild-to-wild plasticity of Earth's upper mantle
Authors:
David Wallis,
Kathryn M. Kumamoto,
Thomas Breithaupt
Abstract:
The flow of Earth's upper mantle has long been considered to occur by slow and near-continuous creep. Such behaviour is observed in classical high-temperature deformation experiments and is a fundamental component of geodynamic models. However, the latest generation of high-resolution experiments, capable of sensing temporal heterogeneities in rates of dislocation motion, have revealed that materi…
▽ More
The flow of Earth's upper mantle has long been considered to occur by slow and near-continuous creep. Such behaviour is observed in classical high-temperature deformation experiments and is a fundamental component of geodynamic models. However, the latest generation of high-resolution experiments, capable of sensing temporal heterogeneities in rates of dislocation motion, have revealed that materials ranging from metals to ice exhibit a spectrum of behaviours termed mild-to-wild plasticity. It remains unknown whether olivine, the most abundant mineral in Earth's upper mantle, always exhibits mild continuous flow or can exhibit intermittent wild fluctuations in plastic strain rate. Here, we demonstrate that olivine exhibits measurable wildness, even under conditions at which its behaviour is predicted to be relatively mild. During nanoindentation experiments conducted at room temperature, continuous plastic flow is punctuated by intermittent bursts of displacement with log-normally distrubuted magnitudes, indicating avalanches of correlated dislocation motion that account for approximately 8 +/- 6% of the plastic strain. Remarkably, the framework of mild-to-wild plasticity predicts that wildness should increase with depth in the Earth, with flow of the asthenospheric upper mantle occurring almost entirely by wild fluctuations of deformation at the grain scale. The recognition of intermittent plasticity in geological materials provides new constraints for microphysical models of dislocation-mediated flow and raises questions about the mehcanisms of transient instabilities in otherwise ductile regimes, such as deep earthquakes and slow-slip events.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Physical properties of asteroid Dimorphos as derived from the DART impact
Authors:
S. D. Raducan,
M. Jutzi,
A. F. Cheng,
Y. Zhang,
O. Barnouin,
G. S. Collins,
R. T. Daly,
T. M. Davison,
C. M. Ernst,
T. L. Farnham,
F. Ferrari,
M. Hirabayashi,
K. M. Kumamoto,
P. Michel,
N. Murdoch,
R. Nakano,
M. Pajola,
A. Rossi,
H. F. Agrusa,
B. W. Barbee,
M. Bruck Syal,
N. L. Chabot,
E. Dotto,
E. G. Fahnestock,
P. H. Hasselmann
, et al. (17 additional authors not shown)
Abstract:
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. O…
▽ More
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. Our simulation, which best matches observations, indicates that Dimorphos is weak, with a cohesive strength of less than a few pascals (Pa), similar to asteroids (162173) Ryugu and (101955) Bennu. We find that a bulk density of Dimorphos, rhoB, lower than 2400 kg/m3, and a low volume fraction of boulders (<40 vol%) on the surface and in the shallow subsurface, are consistent with measured data from the DART experiment. These findings suggest Dimorphos is a rubble pile that might have formed through rotational mass shedding and re-accumulation from Didymos. Our simulations indicate that the DART impact caused global deformation and resurfacing of Dimorphos. ESA's upcoming Hera mission may find a re-shaped asteroid, rather than a well-defined crater.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Momentum Transfer from the DART Mission Kinetic Impact on Asteroid Dimorphos
Authors:
Andrew F. Cheng,
Harrison F. Agrusa,
Brent W. Barbee,
Alex J. Meyer,
Tony L. Farnham,
Sabina D. Raducan,
Derek C. Richardson,
Elisabetta Dotto,
Angelo Zinzi,
Vincenzo Della Corte,
Thomas S. Statler,
Steven Chesley,
Shantanu P. Naidu,
Masatoshi Hirabayashi,
Jian-Yang Li,
Siegfried Eggl,
Olivier S. Barnouin,
Nancy L. Chabot,
Sidney Chocron,
Gareth S. Collins,
R. Terik Daly,
Thomas M. Davison,
Mallory E. DeCoster,
Carolyn M. Ernst,
Fabio Ferrari
, et al. (44 additional authors not shown)
Abstract:
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of…
▽ More
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of asteroid deflection. Here we report the first determination of the momentum transferred to an asteroid by kinetic impact. Based on the change in the binary orbit period, we find an instantaneous reduction in Dimorphos's along-track orbital velocity component of 2.70 +/- 0.10 mm/s, indicating enhanced momentum transfer due to recoil from ejecta streams produced by the impact. For a Dimorphos bulk density range of 1,500 to 3,300 kg/m$^3$, we find that the expected value of the momentum enhancement factor, $β$, ranges between 2.2 and 4.9, depending on the mass of Dimorphos. If Dimorphos and Didymos are assumed to have equal densities of 2,400 kg/m$^3$, $β$= 3.61 +0.19/-0.25 (1 $σ$). These $β$ values indicate that significantly more momentum was transferred to Dimorphos from the esca** impact ejecta than was incident with DART. Therefore, the DART kinetic impact was highly effective in deflecting the asteroid Dimorphos.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Predicting asteroid material properties from a DART-like kinetic impact
Authors:
Kathryn M. Kumamoto,
J. Michael Owen,
Megan Bruck Syal,
Jason Pearl,
Cody Raskin,
Wendy K. Caldwell,
Emma Rainey,
Angela Stickle,
R. Terik Daly,
Olivier Barnouin
Abstract:
NASA's Double Asteroid Redirection Test (DART) mission is the first full-scale test of the kinetic impactor method for asteroid deflection, in which a spacecraft intentionally impacts an asteroid to change its trajectory. DART represents an important first step for planetary defense technology demonstration, providing a realistic assessment of the effectiveness of the kinetic impact approach on a…
▽ More
NASA's Double Asteroid Redirection Test (DART) mission is the first full-scale test of the kinetic impactor method for asteroid deflection, in which a spacecraft intentionally impacts an asteroid to change its trajectory. DART represents an important first step for planetary defense technology demonstration, providing a realistic assessment of the effectiveness of the kinetic impact approach on a near-Earth asteroid. The momentum imparted to the asteroid is transferred from the impacting spacecraft and enhanced by the momentum of material ejected from the impact site. However, the magnitude of the ejecta contribution is dependent on the material properties of the target. These properties, such as strength and shear modulus, are unknown for the DART target asteroid, Dimorphos, as well as most asteroids since such properties are difficult to characterize remotely.
This study examines how hydrocode simulations can be used to estimate material properties from information available post-impact, specifically the asteroid size and shape, the velocity and properties of the impacting spacecraft, and the final velocity change imparted to the asteroid. Across >300 three-dimensional simulations varying seven material parameters describing the asteroid, we found many combinations of properties could reproduce a particular asteroid velocity. Additional observations, such as asteroid mass or crater size, are required to further constrain properties like asteroid strength or outcomes like the momentum enhancement provided by impact ejecta. Our results demonstrate the vital importance of having as much knowledge as possible prior to an impact mission, with key material parameters being the asteroid's mass, porosity, strength, and elastic properties.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Effects of impact and target parameters on the results of a kinetic impactor: predictions for the Double Asteroid Redirection Test (DART) mission
Authors:
Angela M. Stickle,
Mallory E. DeCoster,
Christoph Burger,
Wendy K. Caldwell,
Dawn Graninger,
Kathryn M. Kumamoto,
Robert Luther,
Jens Ormö,
Sabina Raducan,
Emma Rainey,
Christoph M. Schäfer,
James D. Walker,
Yun Zhang,
Patrick Michel,
J. Michael Owen,
Olivier Barnouin,
Andy F. Cheng,
Sidney Cochron,
Gareth S. Collins,
Thomas M. Davison,
Elisabetta Dotto,
Fabio Ferrari,
M. Isabel Herreros,
Stavro L. Ivanovski,
Martin Jutzi
, et al. (8 additional authors not shown)
Abstract:
The Double Asteroid Redirection Test (DART) spacecraft will impact into the asteroid Dimorphos on September 26, 2022 as a test of the kinetic impactor technique for planetary defense. The efficiency of the deflection following a kinetic impactor can be represented using the momentum enhancement factor, Beta, which is dependent on factors such as impact geometry and the specific target material pro…
▽ More
The Double Asteroid Redirection Test (DART) spacecraft will impact into the asteroid Dimorphos on September 26, 2022 as a test of the kinetic impactor technique for planetary defense. The efficiency of the deflection following a kinetic impactor can be represented using the momentum enhancement factor, Beta, which is dependent on factors such as impact geometry and the specific target material properties. Currently, very little is known about Dimorphos and its material properties that introduces uncertainty in the results of the deflection efficiency observables, including crater formation, ejecta distribution, and Beta. The DART Impact Modeling Working Group (IWG) is responsible for using impact simulations to better understand the results of the DART impact. Pre-impact simulation studies also provide considerable insight into how different properties and impact scenarios affect momentum enhancement following a kinetic impact. This insight provides a basis for predicting the effects of the DART impact and the first understanding of how to interpret results following the encounter. Following the DART impact, the knowledge gained from these studies will inform the initial simulations that will recreate the impact conditions, including providing estimates for potential material properties of Dimorphos and Beta resulting from DARTs impact. This paper summarizes, at a high level, what has been learned from the IWG simulations and experiments in preparation for the DART impact. While unknown, estimates for reasonable potential material properties of Dimorphos provide predictions for Beta of 1-5, depending on end-member cases in the strength regime.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Dislocation interactions during low-temperature plasticity of olivine strengthen the lithospheric mantle
Authors:
David Wallis,
Lars. N. Hansen,
Kathryn M. Kumamoto,
Christopher A. Thom,
Oliver Plümper,
Markus Ohl,
William B. Durham,
David L. Goldsby,
David E. J. Armstrong,
Cameron D. Meyers,
Rellie Goddard,
Jessica M. Warren,
Thomas Breithaupt,
Martyn R. Drury,
Angus J. Wilkinson
Abstract:
The strength of the lithosphere is typically modelled based on constitutive equations for steady-state flow. However, models of lithospheric flexure reveal differences in lithospheric strength that are difficult to reconcile based on such flow laws. Recent rheological data from low-temperature deformation experiments on olivine suggest that this discrepancy may be largely explained by strain harde…
▽ More
The strength of the lithosphere is typically modelled based on constitutive equations for steady-state flow. However, models of lithospheric flexure reveal differences in lithospheric strength that are difficult to reconcile based on such flow laws. Recent rheological data from low-temperature deformation experiments on olivine suggest that this discrepancy may be largely explained by strain hardening. Details of the mechanical data, specifically the effects of temperature-independent back stresses stored in the samples, indicate that strain hardening in olivine occurs primarily due to long-range elastic interactions between dislocations. These interpretations provided the basis for a new flow law that incorporates hardening by development of back stress. Here, we test this hypothesis by examining the microstructures of olivine samples deformed plastically at room temperature either in a deformation-DIA apparatus at differential stresses of < 4.3 GPa or in a nanoindenter at applied contact stresses of > 10.2 GPa. High-angular resolution electron backscatter diffraction maps reveal the presence of geometrically necessary dislocations with densities commonly above 10$^{14}$ m$^{-2}$ and intragranular heterogeneities in residual stress on the order of 1 GPa in both sets of samples. Scanning transmission electron micrographs reveal straight dislocations aligned along slip bands and interacting with dislocations of other types that act as obstacles. The stress heterogeneities and accumulations of dislocations along their slip planes are consistent with strain hardening resulting from long-range back-stresses acting between dislocations. These results corroborate the mechanical data in supporting the form of the new flow law for low-temperature plasticity and provide new microstructural criteria for identifying the operation of this deformation mechanism in natural samples.
△ Less
Submitted 18 September, 2019;
originally announced September 2019.