Showing 1–10 of 10 results for author: Kulcsár, C

Numerical simulations for the SAXO+ upgrade: Performance analysis of the adaptive optics system

Authors: Charles Goulas, Raphaël Galicher, Fabrice Vidal, Johan Mazoyer, Florian Ferreira, Arnaud Sevin, Anthony Boccaletti, Eric Gendron, Clémentine Béchet, Michel Tallon, Maud Langlois, Caroline Kulcsár, Henri-François Raynaud, Nicolas Galland, Laura Schreiber, Isaac Bernardino Dinis, François Wildi, Gaël Chauvin, Julien Milli

Abstract: SPHERE, operating at the VLT since 2014, is currently one of the high-contrast instruments with a higher performance. Its adaptive optics system, known as SAXO, will be upgraded to SAXO+, which features the addition of a second stage of adaptive optics. This stage will use a near-infrared pyramid wavefront sensor to record images of fainter exoplanets around redder stars. In this work, we compare… ▽ More SPHERE, operating at the VLT since 2014, is currently one of the high-contrast instruments with a higher performance. Its adaptive optics system, known as SAXO, will be upgraded to SAXO+, which features the addition of a second stage of adaptive optics. This stage will use a near-infrared pyramid wavefront sensor to record images of fainter exoplanets around redder stars. In this work, we compare the performance of SAXO and SAXO+. We look for the optimal values of the key system parameters of SAXO+ for various science cases and turbulence conditions. We performed numerical simulations using COMPASS, an end-to-end adaptive optics simulation tool. We simulated perfect coronagraph images of an on-axis point source, and we minimized the residual starlight intensity between 3 and 5 $λ/D$ as a performance criterion. The explored parameter space includes science cases, turbulence conditions, and key system parameters. In every science case and turbulence condition, SAXO+ reduces the residual starlight intensity inside the correction zone of the second stage by a factor of ten compared to SAXO. The optimal first stage gain is lower for SAXO+ than for SAXO alone. We quantified the gain in performance of SAXO+ when changing the second stage frequency from 2 kHz to 3 kHz, and we conclude that 2 kHz may be sufficient for most realistic conditions. We give the optimal first stage gain as well as the first and second stage frequencies for every seeing, coherence time, and science case. Finally, we find that a 2 ${λ_{\mathrm{WFS}}}/D$ pyramid modulation radius is a good trade-off between performance and robustness against varying turbulence conditions. This study shows that the future SAXO+ system will outperform the current SAXO system in all studied cases. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Comments: 14 pages, 11 figures

Adaptive Optics Telemetry Standard: Design and specification of a novel data exchange format

Authors: Tiago Gomes, Carlos M. Correia, Lisa Bardou, Sylvain Cetre, Johann Kolb, Caroline Kulcsár, François Leroux, Timothy Morris, Nuno Morujão, Benoît Neichel, Jean-Luc Beuzit, Paulo Garcia

Abstract: The amount of Adaptive Optics (AO) telemetry generated by VIS/NIR ground-based observatories is ever greater, leading to a growing need for a standardised data exchange format to support performance analysis and AO research and development activities that involve large-scale telemetry mining, processing, and curation. This paper introduces the Adaptive Optics Telemetry (AOT) data exchange format a… ▽ More The amount of Adaptive Optics (AO) telemetry generated by VIS/NIR ground-based observatories is ever greater, leading to a growing need for a standardised data exchange format to support performance analysis and AO research and development activities that involve large-scale telemetry mining, processing, and curation. This paper introduces the Adaptive Optics Telemetry (AOT) data exchange format as a standard for sharing AO telemetry from visible/infrared ground-based observatories. AOT is based on the Flexible Image Transport System (FITS) and aims to provide unambiguous and consistent data access across various systems and configurations, including natural and single/multiple laser guide-star AO systems. We designed AOT focused on two key use cases: atmospheric turbulence parameter estimation and point-spread function reconstruction (PSF-R). We prototyped and tested the design using existing AO telemetry datasets from multiple systems: single conjugate with natural and laser guide stars, tomographic systems with multi-channel wavefront sensors, single and multi wavefront correctors in systems featuring either a Shack-Hartmann or Pyramid as main wavefront sensors. The AOT file structure has been thoroughly defined, specifying data fields, descriptions, data types, units, and expected dimensions. To support this format, we have developed a Python package that enables data conversion, reading, writing and exploration of AOT files, which has been made publicly available and compatible with a general-purpose Python package manager. We demonstrate the flexibility of the AOT format by packaging data from five different instruments, installed on different telescopes. △ Less

Submitted 13 December, 2023; originally announced December 2023.

SAXO+ upgrade : second stage AO system end-to-end numerical simulations

Authors: Charles Goulas, Fabrice Vidal, Raphaël Galicher, Johan Mazoyer, Florian Ferreira, Arnaud Sevin, Anthony Boccaletti, Éric Gendron, Clémentine Béchet, Michel Tallon, Maud Langlois, Caroline Kulcsár, Henri-François Raynaud, Nicolas Galland, Laura Schreiber, Gaël Chauvin, Julien Milli

Abstract: SAXO+ is a proposed upgrade to SAXO, the AO system of the SPHERE instrument on the ESO Very Large Telescope. It will improve the capabilities of the instrument for the detection and characterization of young giant planets. It includes a second stage adaptive optics system composed of a dedicated near-infrared wavefront sensor and a deformable mirror. This second stage will remove the residual wave… ▽ More SAXO+ is a proposed upgrade to SAXO, the AO system of the SPHERE instrument on the ESO Very Large Telescope. It will improve the capabilities of the instrument for the detection and characterization of young giant planets. It includes a second stage adaptive optics system composed of a dedicated near-infrared wavefront sensor and a deformable mirror. This second stage will remove the residual wavefront errors left by the current primary AO loop (SAXO). This paper focuses on the numerical simulations of the second stage (SAXO+) and concludes on the impact of the main AO parameters used to build the design strategy. Using an end-to-end AO simulation tool (COMPASS), we investigate the impact of several parameters on the performance of the AO system. We measure the performance in minimizing the star residuals in the coronagraphic image. The parameters that we study are : the second stage frequency, the photon flux on each WFS, the first stage gain and the DM number of actuators of the second stage. We show that the performance is improved by a factor 10 with respect to the current AO system (SAXO). The optimal second stage frequency is between 1 and 2 kHz under good observing conditions. In a red star case, the best SAXO+ performance is achieved with a low first stage gain of 0.05, which reduces the first stage rejection. △ Less

Submitted 24 October, 2023; originally announced October 2023.

Comments: 10 pages, 8 figures. Submitted to AO4ELT7 conference proceedings

A Binary Annular Phase Mask to Regulate Spherical Aberration and Allow Super-Localization in Single-Particle Tracking over Extended Depth-of-Focus

Authors: Quentin Gresil, Antony Lee, Olivier Leveque, Karen Caicedo, Blanca Martin Munoz, Caroline Kulcsar, Francois Goudail, Pierre Bon, Laurent Cognet

Abstract: Important applications of single-particle tracking (SPT) aim at deciphering the diffusion properties of single fluorescent nanoparticles immersed in heterogeneous environments, such as multi-cellular biological tissues. To maximize the particle localization precision in such complex environments, high numerical aperture objectives are often required, which intrinsically restrict depth-of-focus (DO… ▽ More Important applications of single-particle tracking (SPT) aim at deciphering the diffusion properties of single fluorescent nanoparticles immersed in heterogeneous environments, such as multi-cellular biological tissues. To maximize the particle localization precision in such complex environments, high numerical aperture objectives are often required, which intrinsically restrict depth-of-focus (DOF) to less than a micrometer and impedes recording long trajectories when particles escape the plane of focus. In this work, we show that a simple binary phase mask can work with the spherical aberration inevitably induced by thick sample inhomogeneities, to extend the DOF of a single-molecule fluorescence microscope over more than 4 μm. The effect of point-spread-function (PSF) engineering over spherical aberration regularizes inhomogeneities of the PSF along the optical axis by restricting it to a narrow distribution. This allows the use of a single fitting function (i.e. Gaussian function) to localize single emitters over the whole extended DOF. Application of this simple approach on diffusing nanoparticles demonstrate that SPT trajectories can be recorded on significantly longer times. △ Less

Submitted 11 May, 2023; v1 submitted 25 April, 2023; originally announced April 2023.

Comments: 18 pages, 4 figures

Upgrading the high contrast imaging facility SPHERE: science drivers and instrument choices

Authors: A. Boccaletti, G. Chauvin, F. Wildi, J. Milli, E. Stadler, E. Diolaiti, R. Gratton, F. Vidal, M. Loupias, M. Langlois, F. Cantalloube, M. N'Diaye, D. Gratadour, F. Ferreira, M. Tallon, J. Mazoyer, D. Segransan, D. Mouillet, J. -L. Beuzit, M. Bonnefoy, R. Galicher, A. Vigan, I. Snellen, M. Feldt, S. Desidera , et al. (49 additional authors not shown)

Abstract: SPHERE+ is a proposed upgrade of the SPHERE instrument at the VLT, which is intended to boost the current performances of detection and characterization for exoplanets and disks. SPHERE+ will also serve as a demonstrator for the future planet finder (PCS) of the European ELT. The main science drivers for SPHERE+ are 1/ to access the bulk of the young giant planet population down to the snow line (… ▽ More SPHERE+ is a proposed upgrade of the SPHERE instrument at the VLT, which is intended to boost the current performances of detection and characterization for exoplanets and disks. SPHERE+ will also serve as a demonstrator for the future planet finder (PCS) of the European ELT. The main science drivers for SPHERE+ are 1/ to access the bulk of the young giant planet population down to the snow line ($3-10$ au), to bridge the gap with complementary techniques (radial velocity, astrometry); 2/ to observe fainter and redder targets in the youngest ($1-10$\,Myr) associations compared to those observed with SPHERE to directly study the formation of giant planets in their birth environment; 3/ to improve the level of characterization of exoplanetary atmospheres by increasing the spectral resolution in order to break degeneracies in giant planet atmosphere models. Achieving these objectives requires to increase the bandwidth of the xAO system (from $\sim$1 to 3\,kHz) as well as the sensitivity in the infrared (2 to 3\,mag). These features will be brought by a second stage AO system optimized in the infrared with a pyramid wavefront sensor. As a new science instrument, a medium resolution integral field spectrograph will provide a spectral resolution from 1000 to 5000 in the J and H bands. This paper gives an overview of the science drivers, requirements and key instrumental trade-off that were done for SPHERE+ to reach the final selected baseline concept. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Comments: To appear in the Proceedings of the SPIE Astronomical Telescopes + Instrumentation (2022), 13 pages, 6 figure

Towards virtual access of adaptive optics telemetry data

Authors: Tiago Gomes, Carlos Correia, Lisa Bardou, Olivier Beltramo-Martin, Thierry Fusco, Caroline Kulcsár, Timothy Morris, Nuno Morujão, Benoît Neichel, James Osborn, Paulo Garcia

Abstract: Large amounts of Adaptive-Optics (AO) control loop data and telemetry are currently inaccessible to end-users. Broadening access to those data has the potential to change the AO landscape on many fronts, addressing several use-cases such as derivation of the system's PSF, turbulence characterisation and optimisation of system control. We address one of the biggest obstacles to sharing these data:… ▽ More Large amounts of Adaptive-Optics (AO) control loop data and telemetry are currently inaccessible to end-users. Broadening access to those data has the potential to change the AO landscape on many fronts, addressing several use-cases such as derivation of the system's PSF, turbulence characterisation and optimisation of system control. We address one of the biggest obstacles to sharing these data: the lack of standardisation, which hinders access. We propose an object-oriented Python package for AO telemetry, whose data model abstracts the user from an underlining archive-ready data exchange standard based on the Flexible Image Transport System (FITS). Its design supports data from a wide range of existing and future AO systems, either in raw format or abstracted from actual instrument details. We exemplify its usage with data from active AO systems on 10m-class observatories, of which two are currently supported (AOF and Keck), with plans for more. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Cascade adaptive optics: contrast performance analysis of a two-stage controller by numerical simulations

Authors: Nelly Cerpa-Urra, Markus Kasper, Caroline Kulcsár, Henri-François Raynaud, Cedric Taïssir Heritier

Abstract: The contrast performance of current eXtreme Adaptive Optics (XAO) systems can be improved by adding a second AO correction stage featuring its own wavefront sensor, deformable mirror, and real-time controller. We develop a dynamical model for such a cascade AO (CAO) system with two stages each controlled by a standard integrator, and study its control properties. We study how such a configuration… ▽ More The contrast performance of current eXtreme Adaptive Optics (XAO) systems can be improved by adding a second AO correction stage featuring its own wavefront sensor, deformable mirror, and real-time controller. We develop a dynamical model for such a cascade AO (CAO) system with two stages each controlled by a standard integrator, and study its control properties. We study how such a configuration can improve an existing system without modifying the first stage. We analyze the CAO architecture in general and show how part of the disturbance is transferred from low to high temporal frequencies with a nefarious effect of the second stage integrator overshoot, and suggest possible ways to mitigate this. We also carry out numerical simulations of the particular case of a first stage AO using a Shack-Hartmann wavefront sensor and a second stage AO with a smaller deformable mirror running at a higher framerate to reduce temporal error. In this case, we demonstrate that the second stage improves imaging contrast by one order of magnitude and shortens the decorrelation time of atmospheric turbulence speckles by even a greater factor. The results show that CAO presents a promising and relatively simple way to upgrade some existing XAO systems and achieve improved imaging contrasts fostering a large number of science cases including the direct imaging of Exoplanets. △ Less

Submitted 27 January, 2022; originally announced January 2022.

Comments: Accepted for publication in Journal of Astronomical Telescopes, Instruments and Systems

PCS -- A Roadmap for Exoearth Imaging with the ELT

Authors: Markus Kasper, Nelly Cerpa Urra, Prashant Pathak, Markus Bonse, Jalo Nousiainen, Byron Engler, Cédric Taïssir Heritier, Jens Kammerer, Serban Leveratto, Chang Rajani, Paul Bristow, Miska Le Louarn, Pierre-Yves Madec, Stefan Ströbele, Christophe Verinaud, Adrian Glauser, Sascha P. Quanz, Tapio Helin, Christoph Keller, Frans Snik, Anthony Boccaletti, Gaël Chauvin, David Mouillet, Caroline Kulcsár, Henri-François Raynaud

Abstract: The Planetary Camera and Spectrograph (PCS) for the Extremely Large Telescope (ELT) will be dedicated to detecting and characterising nearby exoplanets with sizes from sub-Neptune to Earth-size in the neighbourhood of the Sun. This goal is achieved by a combination of eXtreme Adaptive Optics (XAO), coronagraphy and spectroscopy. PCS will allow us not only to take images, but also to look for biosi… ▽ More The Planetary Camera and Spectrograph (PCS) for the Extremely Large Telescope (ELT) will be dedicated to detecting and characterising nearby exoplanets with sizes from sub-Neptune to Earth-size in the neighbourhood of the Sun. This goal is achieved by a combination of eXtreme Adaptive Optics (XAO), coronagraphy and spectroscopy. PCS will allow us not only to take images, but also to look for biosignatures such as molecular oxygen in the exoplanets' atmospheres. This article describes the PCS primary science goals, the instrument concept and the research and development activities that will be carried out over the coming years. △ Less

Submitted 20 March, 2021; originally announced March 2021.

Comments: 6 pages, 6 figures

Journal ref: The Messenger 182, 2021

Diffraction-limited integral-field spectroscopy for extreme adaptive optics systems with the Multi-Core fiber-fed Integral-Field Unit

Authors: Sebastiaan Y. Haffert, Robert J. Harris, Alessio Zanutta, Fraser A. Pike, Andrea Bianco, Eduardo Redaelli, Aurélien Benoît, David G. MacLachlan, Calum A. Ross, Itandehui Gris-Sánchez, Mareike D. Trappen, Yilin Xu, Matthias Blaicher, Pascal Maier, Giulio Riva, Baptiste Sinquin, Caroline Kulcsár, Nazim Ali Bharmal, Eric Gendron, Lazar Staykov, Tim J. Morris, Santiago Barboza, Norbert Muench, Lisa Bardou, Léonard Prengère , et al. (9 additional authors not shown)

Abstract: Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact… ▽ More Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact and easy to integrate into current and future direct imaging instruments for exoplanet characterization. This achieved by making use of recent progress in photonic manufacturing to create a single-mode fiber-fed image reformatter. The fiber-link is created with 3D printed lenses on top of a single-mode multi-core fiber that feeds an ultrafast laser inscribed photonic chip that reformats the fiber into a pseudo-slit. We then couple it to a first-order spectrograph with a triple stacked volume phase holographic grating for a high efficiency over a large bandwidth. The prototype system has had a successful first-light observing run at the 4.2 meter William Herschel Telescope. The measured on-sky resolving power is between 2500 and 3000, depending on the wavelength. With our observations we show that single-mode integral-field spectroscopy is a viable option for current and future exoplanet imaging instruments. △ Less

Submitted 8 September, 2020; originally announced September 2020.

Comments: submitted to JATIS

Experience with wavefront sensor and deformable mirror interfaces for wide-field adaptive optics systems

Authors: A. G. Basden, D. Atkinson, N. A. Bharmal, U. Bitenc, M. Brangier, T. Buey, T. Butterley, D. Cano, F. Chemla, P. Clark, M. Cohen, J. -M. Conan, F. J. de Cos, C. Dickson, N. A. Dipper, C. N. Dunlop, P. Feautrier, T. Fusco, J. L. Gach, E. Gendron, D. Geng, S. J. Goodsell, D. Gratadour, A. H. Greenaway, A. Guesalaga , et al. (34 additional authors not shown)

Abstract: Recent advances in adaptive optics (AO) have led to the implementation of wide field-of-view AO systems. A number of wide-field AO systems are also planned for the forthcoming Extremely Large Telescopes. Such systems have multiple wavefront sensors of different types, and usually multiple deformable mirrors (DMs). Here, we report on our experience integrating cameras and DMs with the real-time c… ▽ More Recent advances in adaptive optics (AO) have led to the implementation of wide field-of-view AO systems. A number of wide-field AO systems are also planned for the forthcoming Extremely Large Telescopes. Such systems have multiple wavefront sensors of different types, and usually multiple deformable mirrors (DMs). Here, we report on our experience integrating cameras and DMs with the real-time control systems of two wide-field AO systems. These are CANARY, which has been operating on-sky since 2010, and DRAGON, which is a laboratory adaptive optics real-time demonstrator instrument. We detail the issues and difficulties that arose, along with the solutions we developed. We also provide recommendations for consideration when develo** future wide-field AO systems. △ Less

Submitted 24 March, 2016; originally announced March 2016.

Comments: Accepted for publication in MNRAS