-
Solvent-Free High-Temperature Capillary Stam** of Stimuli-Responsive Polymers: Wettability Management by Orthogonal Substrate Functionalization
Authors:
Fatih Alarslan,
Hanna Hübner,
Jonas Klein,
Karsten Küpper,
Joachim Wollschläger,
Markus Haase,
Markus Gallei,
Martin Steinhart
Abstract:
The wettability of surfaces determines their antifouling, antifogging, anti-icing, and self-cleaning properties as well as their usability for sensing, oil-water separation, water collection, and water purification. Solvent-free high-temperature capillary stam** of stimuli-responsive polymers yielding arrays of stimuli-responsive polymer microdots on differently modified substrates enables the f…
▽ More
The wettability of surfaces determines their antifouling, antifogging, anti-icing, and self-cleaning properties as well as their usability for sensing, oil-water separation, water collection, and water purification. Solvent-free high-temperature capillary stam** of stimuli-responsive polymers yielding arrays of stimuli-responsive polymer microdots on differently modified substrates enables the flexible generation of switchable surfaces with different water contact angles (WCAs). Potential problems associated with the deposition of polymer solutions, such as the handling of volatile organic solvents, phase separation induced by solvent evaporation, and capillarity-driven flow processes, are circumvented. We used composite stamps with topographically patterned contact surfaces consisting of metallic nickel cores and porous MnO2 coatings taking up the stimuli-responsive polymers. The short transport paths from the MnO2 contact layers to the counterpart substrates enabled the stam** of polymer melts containing components impeding flow, such as carbon nanotubes (CNTs). Thus-obtained arrays of polymer-CNT hybrid microdots prevent problems associated with continuous coatings including delamination and crack propagation. Moreover, the range within which the properties of the stamped stimuli-responsive polymer microdots are switchable can be tuned by orthogonal substrate modification. As an example, we stamped hybrid microdots consisting of poly(2-(methacryloyloxy)ethyl ferrocenecarboxylate) (PFcMA) and CNTs onto indium tin oxide (ITO) substrates. Coating the ITO substrates with a poly(ethylene oxide)-terminated silane shifted the WCAs obtained by switching the PFcMA between its oxidized and reduced states by nearly 50°.
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
Structural and magnetic investigation of the interfaces of $\mathrm{Fe_3O_4/MgO(001)}$ with and without NiO interlayer
Authors:
Tobias Pohlmann,
Florian Bertram,
Jannis Thien,
Jari Rodewald,
Kevin Ruwisch,
Timo Kuschel,
Eugen Weschke,
Karsten Küpper,
Joachim Wollschläger
Abstract:
We present an investigation on the structural and magnetic properties of the interfaces of $\mathrm{Fe_3O_4/MgO(001)}$ and $\mathrm{Fe_3O_4/NiO/MgO(001)}$ by extracting cation-selective magnetooptical depth profiles by means of x-ray magnetic reflectivity (XRMR) in combination with charge-transfer multiplet simulations of x-ray magnetic circular dichroism (XMCD) data. For…
▽ More
We present an investigation on the structural and magnetic properties of the interfaces of $\mathrm{Fe_3O_4/MgO(001)}$ and $\mathrm{Fe_3O_4/NiO/MgO(001)}$ by extracting cation-selective magnetooptical depth profiles by means of x-ray magnetic reflectivity (XRMR) in combination with charge-transfer multiplet simulations of x-ray magnetic circular dichroism (XMCD) data. For $\mathrm{Fe_3O_4/MgO(001)}$, the magnetooptical depth profiles at the $\mathrm{Fe^{2+}_{oct}}$ and the $\mathrm{Fe^{3+}_{oct}}$ resonant energies follow exactly the structural profile, while the magnetooptical depth profile at the $\mathrm{Fe^{3+}_{tet}}$ resonance is offset by $3.2\pm1.3\,$Å from the interface, consistent with a B-site interface termination of $\mathrm{Fe_3O_4}$ with fully intact magnetic order. In contrast, for $\mathrm{Fe_3O_4/NiO(001)}$, the magnetooptical depth profiles at the $\mathrm{Fe^{2+}_{oct}}$ and the $\mathrm{Ni^{2+}}$ resonances agree with the structural profile, but the interface positions of the magnetooptical depth profiles at the $\mathrm{Fe^{3+}_{oct}}$ and the $\mathrm{Fe^{3+}_{tet}}$ resonances are laterally shifted by $3.3\pm 1.4\,$Å and $2.7\pm0.9\,$Å, respectively, not consistent with a magnetically ordered stoichiometric interface. This may be related to an intermixed $\mathrm{(Ni,Fe)O}$ layer at the interface. The magnetooptical depth profiles at the Ni $L_3$ edge reveal uncompensated magnetic moments throughout the NiO film.
△ Less
Submitted 25 November, 2021;
originally announced November 2021.
-
Time-resolved diffraction and photoelectron spectroscopy investigation of the reactive molecular beam epitaxy of $\mathrm{Fe_3O_4}$ ultrathin films
Authors:
Tobias Pohlmann,
Martin Hoppe,
Jannis Thien,
Arka Bikash Dey,
Andreas Alexander,
Kevin Ruwisch,
Olof Gutowski,
Jan Röh,
Andrei Gloskovskii,
Christoph Schlueter,
Karsten Küpper,
Joachim Wollschläger,
Florian Bertram
Abstract:
We present time-resolved high energy x-ray diffraction (tr-HEXRD), time-resolved hard x-ray photoelectron spectroscopy (tr-HAXPES) and time-resolved grazing incidence small angle x-ray scattering (tr-GISAXS) data of the reactive molecular beam epitaxy (RMBE) of $\mathrm{Fe_3O_4}$ ultrathin films on various substrates. Reciprocal space maps are recorded during the deposition of $\mathrm{Fe_3O_4}$ o…
▽ More
We present time-resolved high energy x-ray diffraction (tr-HEXRD), time-resolved hard x-ray photoelectron spectroscopy (tr-HAXPES) and time-resolved grazing incidence small angle x-ray scattering (tr-GISAXS) data of the reactive molecular beam epitaxy (RMBE) of $\mathrm{Fe_3O_4}$ ultrathin films on various substrates. Reciprocal space maps are recorded during the deposition of $\mathrm{Fe_3O_4}$ on $\mathrm{SrTiO_3(001)}$, MgO(001) and NiO/MgO(001) in order to observe the temporal evolution of Bragg reflections sensitive to the octahedral and tetrahedral sublattices of the inverse spinel structure of $\mathrm{Fe_3O_4}$. A time delay between the appearance of rock salt and spinel-exclusive reflections reveals that first, the iron oxide film grows with $\mathrm{Fe_{1-δ}O}$ rock salt structure with exclusive occupation of octahedral lattice sites. When this film is 1.1$\,$nm thick, the further growth of the iron oxide film proceeds in the inverse spinel structure, with both octahedral and tetrahedral lattice sites being occupied. In addition, iron oxide on $\mathrm{SrTiO_3(001)}$ initially grows with none of these structures. Here, the formation of the rock salt structure starts when the film is 1.5$\,$nm thick. This is confirmed by tr-HAXPES data obtained during growth of iron oxide on $\mathrm{SrTiO_3(001)}$, which demonstrate an excess of $\mathrm{Fe^{2+}}$ cations in growing films thinner than 3.2$\,$nm. This rock salt phase only appears during growth and vanishes after the supply of the Fe molecular beam is stopped. Thus, it can be concluded the rock salt structure of the interlayer is a property of the dynamic growth process. The tr-GISAXS data link these structural results to an island growth mode of the first 2-3$\,$nm on both MgO(001) and $\mathrm{SrTiO_3(001)}$ substrates.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Cation- and lattice-site-selective magnetic depth profiles of ultrathin $\mathrm{Fe_3O_4}$(001) films
Authors:
Tobias Pohlmann,
Timo Kuschel,
Jari Rodewald,
Jannis Thien,
Kevin Ruwisch,
Florian Bertram,
Eugen Weschke,
Padraic Shafer,
Joachim Wollschläger,
Karsten Kuepper
Abstract:
A detailed understanding of ultrathin film surface properties is crucial for the proper interpretation of spectroscopic, catalytic and spin-transport data. We present x-ray magnetic circular dichroism (XMCD) and x-ray resonant magnetic reflectivity (XRMR) measurements on ultrathin $\mathrm{Fe_3O_4}$ films to obtain magnetic depth profiles for the three resonant energies corresponding to the differ…
▽ More
A detailed understanding of ultrathin film surface properties is crucial for the proper interpretation of spectroscopic, catalytic and spin-transport data. We present x-ray magnetic circular dichroism (XMCD) and x-ray resonant magnetic reflectivity (XRMR) measurements on ultrathin $\mathrm{Fe_3O_4}$ films to obtain magnetic depth profiles for the three resonant energies corresponding to the different cation species $\mathrm{Fe^{2+}_{oct}}$, $\mathrm{Fe^{3+}_{tet}}$ and $\mathrm{Fe^{3+}_{oct}}$ located on octahedral and tetrahedral sites of the inverse spinel structure of $\mathrm{Fe_3O_4}$. By analyzing the XMCD spectrum of $\mathrm{Fe_3O_4}$ using multiplet calculations, the resonance energy of each cation species can be isolated. Performing XRMR on these three resonant energies yields magnetic depth profiles that correspond each to one specific cation species. The depth profiles of both kinds of $\mathrm{Fe^{3+}}$ cations reveal a $\mathrm{3.9 \pm 1~Å}$-thick surface layer of enhanced magnetization, which is likely due to an excess of these ions at the expense of the $\mathrm{Fe^{2+}_{oct}}$ species in the surface region. The magnetically enhanced $\mathrm{Fe^{3+}_{tet}}$ layer is additionally shifted about $\mathrm{3\pm 1.5~Å}$ farther from the surface than the $\mathrm{Fe^{3+}_{oct}}$ layer.
△ Less
Submitted 4 May, 2020;
originally announced May 2020.
-
Enhanced magnetization of ultrathin NiFe$_2$O$_4$ films on SrTiO$_3$(001) related to cation disorder and anomalous strain
Authors:
J. Rodewald,
J. Thien,
K. Ruwisch,
F. Bertram,
K. Kuepper,
J. Wollschläger
Abstract:
NiFe$_2$O$_4$ thin films with varying thickness were grown on SrTiO$_3$(001) by reactive molecular beam epitaxy. Soft and hard x-ray photoelectron spectroscopy measurements reveal a homogeneous cation distribution throughout the whole film with stoichiometric Ni:Fe ratios of 1:2 independent of the film thickness. Low energy electron diffraction and high resolution (grazing incidence) x-ray diffrac…
▽ More
NiFe$_2$O$_4$ thin films with varying thickness were grown on SrTiO$_3$(001) by reactive molecular beam epitaxy. Soft and hard x-ray photoelectron spectroscopy measurements reveal a homogeneous cation distribution throughout the whole film with stoichiometric Ni:Fe ratios of 1:2 independent of the film thickness. Low energy electron diffraction and high resolution (grazing incidence) x-ray diffraction in addition to x-ray reflectivity experiments were conducted to obtain information of the film surface and bulk structure, respectively. For ultrathin films up to 7.3 nm, lateral tensile and vertical compressive strain is observed, contradicting an adaption at the interface of NiFe$_2$O$_4$ film and substrate lattice. The applied strain is accompanied by an increased lateral defect density, which is decaying for relaxed thicker films and attributed to the growth of lateral grains. Determination of cationic site occupancies in the inverse spinel structure by analysis of site sensitive diffraction peaks reveals low tetrahedral occupancies for thin, strained NiFe$_2$O$_4$ films, resulting in partial presence of deficient rock salt like structures. These structures are assumed to be responsible for the enhanced magnetization of up to $\sim$250\% of the NiFe$_2$O$_4$ bulk magnetization as observed by superconducting quantum interference device magnetometry for ultrathin films below 7.3 nm thickness.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Free-sustaining Three-dimensional S235 Steel-based Porous Electrocatalyst for Highly Efficient and Durable Oxygen Evolution
Authors:
Weijia Han,
Karsten Küpper,
Peilong Hou,
Wajiha Akram,
Henning Eickmeier,
Jörg Hardege,
Martin Steinhart,
Helmut Schäfer
Abstract:
A novel oxygen evolution reaction (OER) catalyst (3D S235-P steel) based on steel S235 substrate has been successfully prepared via a facile one-step surface modification. The standard Carbon Manganese steel was phosphorizated superficially leading to the formation of a unique 3D interconnected nanoporous surface with high specific area which facilitates the electrocatalytically initiated oxygen e…
▽ More
A novel oxygen evolution reaction (OER) catalyst (3D S235-P steel) based on steel S235 substrate has been successfully prepared via a facile one-step surface modification. The standard Carbon Manganese steel was phosphorizated superficially leading to the formation of a unique 3D interconnected nanoporous surface with high specific area which facilitates the electrocatalytically initiated oxygen evolution reaction. The prepared 3D S235-P steel exhibits enhanced electrocatalytic OER activities in alkaline regime confirmed by a low overpotential (η=326 mV at j=10 mA cm-2) and a small Tafel slope of 68.7 mV dec-1. Moreover, the catalyst was found to be stable under long-term usage conditions functioning as oxygen evolving electrode at pH 13 as evidenced by the sufficient charge to oxygen conversion rate (Faradaic efficiency: 82.11% and 88.34% at 10 mA cm-2 and 5 mA cm-2, respectively). In addition, it turned out that the chosen surface modification renders steel S235 into an OER electrocatalyst sufficiently and stable to work in neutral pH condition. Our investigation revealed that the high catalytic activities are likely to stem from the generated Fe/(Mn) hydroxide/oxo-hydroxides generated during the OER process. The phosphorization treatment is therefore not only an efficient way to optimize the electrocatalytic performance of standard Carbon-Manganese steel, but also enables for the development of low cost and abundant steels in the field of energy conversion.
△ Less
Submitted 17 September, 2018;
originally announced September 2018.
-
Ray Effect Mitigation for the Discrete Ordinates Method through Quadrature Rotation
Authors:
Thomas Camminady,
Martin Frank,
Kerstin Küpper,
Jonas Kusch
Abstract:
Solving the radiation transport equation is a challenging task, due to the high dimensionality of the solution's phase space. The commonly used discrete ordinates (S$_N$) method suffers from ray effects which result from a break in rotational symmetry from the finite set of directions chosen by S$_N$. The spherical harmonics (P$_N$) equations, on the other hand, preserve rotational symmetry, but c…
▽ More
Solving the radiation transport equation is a challenging task, due to the high dimensionality of the solution's phase space. The commonly used discrete ordinates (S$_N$) method suffers from ray effects which result from a break in rotational symmetry from the finite set of directions chosen by S$_N$. The spherical harmonics (P$_N$) equations, on the other hand, preserve rotational symmetry, but can produce negative particle densities. The discrete ordinates (S$_N$) method, in turn, by construction ensures non-negative particle densities.
In this paper we present a modified version of the S$_N$ method, the rotated S$_N$ (rS$_N$) method. Compared to S$_N$, we add a rotation and interpolation step for the angular quadrature points and the respective function values after every time step. Thereby, the number of directions on which the solution evolves is effectively increased and ray effects are mitigated. Solution values on rotated ordinates are computed by an interpolation step. Implementation details are provided and in our experiments the rotation/interpolation step only adds 5% to 10% to the runtime of the S$_N$ method. We apply the rS$_N$ method to the line-source and a lattice test case, both being prone to ray-effects. Ray effects are reduced significantly, even for small numbers of quadrature points. The rS$_N$ method yields qualitatively similar solutions to the S$_N$ method with less than a third of the number of quadrature points, both for the line-source and the lattice problem. The code used to produce our results is freely available and can be downloaded.
△ Less
Submitted 20 August, 2018; v1 submitted 17 August, 2018;
originally announced August 2018.
-
Steel-Based Electrocatalysts for Efficient and Durable Oxygen Evolution in Acidic Media
Authors:
Helmut Schäfer,
Karsten Küpper,
Mercedes Schmidt,
Klaus Müller-Buschbaum,
Johannes Stangl,
Diemo Daum,
Martin Steinhart,
Christine Schulz-Kölbel,
Weijia Han,
Joachim Wollschläger,
Ulrich Krupp,
Peilong Hou,
Xiaogang Liu
Abstract:
High overpotentials, particularly an issue of common anode materials, hamper the process of water electrolysis for clean energy generation. Thanks to immense research efforts up to date oxygen evolution electrocatalysts based on earth-abundant elements work efficiently and stably in neutral and alkaline regimes. However, non-noble metal-based anode materials that can withstand low pH regimes are c…
▽ More
High overpotentials, particularly an issue of common anode materials, hamper the process of water electrolysis for clean energy generation. Thanks to immense research efforts up to date oxygen evolution electrocatalysts based on earth-abundant elements work efficiently and stably in neutral and alkaline regimes. However, non-noble metal-based anode materials that can withstand low pH regimes are considered to be an indispensable prerequisite for the water splitting to succeed in the future. All oxygen evolving electrodes working durably and actively in acids contain Ir at least as an additive. Due to its scarcity and high acquisition costs noble elements like Pt, Ru and Ir need to be replaced by earth abundant elements. We have evaluated a Ni containing stainless steel for use as an oxygen-forming electrode in diluted H2SO4. Unmodified Ni42 steel showed a significant weight loss after long term OER polarization experiments. Moreover, a substantial loss of the OER performance of the untreated steel specimen seen in linear sweep voltammetry measurements turned out to be a serious issue. However, upon anodization in LiOH, Ni42 alloy was rendered in OER electrocatalysts that exhibit under optimized synthesis conditions stable overpotentials down to 445 mV for 10 mA cm-2 current density at pH 0. Even more important: The resulting material has proven to be robust upon long-term usage (weight loss: 20 mug/mm2 after 50 ks of chronopotentiometry at pH 1) towards OER in H2SO4. Our results suggest that electrochemical oxidation of Ni42 steel in LiOH (sample Ni42Li205) results in the formation of a metal oxide containing outer zone that supports solution route-based oxygen evolution in acidic regime accompanied by a good stability of the catalyst.
△ Less
Submitted 14 March, 2018;
originally announced March 2018.
-
Electrooxidation of a cobalt based steel in LiOH: a non-noble metal based electro-catalyst suitable for durable water-splitting in an acidic milieu
Authors:
Helmut Schäfer,
Karsten Küpper,
Klaus Müller-Buschbaum,
Diemo Daum,
Martin Steinhart,
Joachim Wollschläger,
Ulrich Krupp,
Mercedes Schmidt,
Weijia Hana,
Johannes Stangl
Abstract:
The use of proton exchange membrane (PEM) electrolyzers is the method of choice for the conversion of solar energy when frequently occurring changes of the current load are an issue. However, this technique requires electrolytes with low pH. All oxygen evolving electrodes working durably and actively in acids contain IrOx. Due to their scarcity and high acquisition costs, noble elements like Pt, R…
▽ More
The use of proton exchange membrane (PEM) electrolyzers is the method of choice for the conversion of solar energy when frequently occurring changes of the current load are an issue. However, this technique requires electrolytes with low pH. All oxygen evolving electrodes working durably and actively in acids contain IrOx. Due to their scarcity and high acquisition costs, noble elements like Pt, Ru and Ir need to be replaced by earth abundant elements. We have evaluated a cobalt containing steel for use as an oxygen-forming electrode in H2SO4. We found that the dissolving of ingredients out of the steel electrode at oxidative potential in sulfuric acid, which is a well-known, serious issue, can be substantially reduced when the steel is electro-oxidized in LiOH prior to electrocatalysis. Under optimized synthesis conditions a cobalt-containing tool steel was rendered into a durable oxygen evolution reaction (OER) electrocatalyst (weight loss: 39 mug mm-2 after 50 000 s of chronopotentiometry at pH 1) that exhibits overpotentials down to 574 mV at 10 mA cm-2 current density at pH 1. Focused ion beam SEM FIB-SEM) was successfully used to create a structure-stability relationship.
△ Less
Submitted 28 November, 2017;
originally announced December 2017.
-
X20CoCrWMo10-9//Co3O4: a Metal-Ceramic Composite with Unique Efficiency Values for Water-Splitting in Neutral Regime
Authors:
Helmut Schäfer,
Daniel M. Chevrier,
Karsten Küpper,
Peng Zhang,
Joachim Wollschläger,
Diemo Daum,
Martin Steinhart,
Claudia Heß,
Ulrich Krupp,
Mercedes Schmidt
Abstract:
Water splitting allows the storage of solar energy into chemical bonds (H2+O2) and will help to implement the urgently needed replacement of limited available fossil fuels. Particularly in neutral environment electrochemically initiated water splitting suffers from low efficiency due to high overpotentials caused by the anode. Electro-activation of X20CoCrWMo10-9, a Co-based tool steel resulted in…
▽ More
Water splitting allows the storage of solar energy into chemical bonds (H2+O2) and will help to implement the urgently needed replacement of limited available fossil fuels. Particularly in neutral environment electrochemically initiated water splitting suffers from low efficiency due to high overpotentials caused by the anode. Electro-activation of X20CoCrWMo10-9, a Co-based tool steel resulted in a new composite material (X20CoCrWMo10-9//Co3O4) that catalyzes the anode half-cell reaction of water electrolysis with a so far unequalled effectiveness. The current density achieved with this new anode in pH 7 corrected 0.1 M phosphate buffer is over a wide range of overpotentials around 10 times higher compared to recently developed, up-to-date electrocatalysts and represents the benchmark performance advanced catalysts show in regimes that support water splitting significantly better than pH 7 medium. X20CoCrWMo10-9//Co3O4 exhibited electrocatalytic properties not only at pH 7, but also at pH 13, which is much superior to the ones of IrO2-RuO2, single-phase Co3O4- or Fe/Ni- based catalysts. Both XPS and FT-IR experiments unmasked Co3O4 as the dominating compound on the surface of the X20CoCrWMo10-9//Co3O4 composite. Upon a comprehensive dual beam FIB-SEM (focused ion beam-scanning electron microscopy) study we could show that the new composite does not exhibit a classical substrate-layer structure due to the intrinsic formation of the Co-enriched outer zone. This structural particularity is basically responsible for the outstanding electrocatalytic OER performance.
△ Less
Submitted 22 March, 2017;
originally announced March 2017.
-
Electro-Oxidation of Ni42 Steel: A highly Active Bifunctional Electrocatalyst
Authors:
Helmut Schäfer,
Daniel M. Chevrier,
Peng Zhang,
Johannes Stangl,
Klaus Müller-Buschbaum,
Jörg D. Hardege,
Karsten Küpper,
Joachim Wollschläger,
Ulrich Krupp,
Simon Dühnen,
Martin Steinhart,
Lorenz Walder,
Shamaila Sadaf,
Mercedes Schmidt
Abstract:
Janus type Water-Splitting Catalysts have attracted highest attention as a tool of choice for solar to fuel conversion. AISI Ni 42 steel was upon harsh anodization converted in a bifunctional electrocatalyst. Oxygen evolution reaction- (OER) and hydrogen evolution reaction (HER) are highly efficiently and steadfast catalyzed at pH 7, 13, 14, 14.6 (OER) respectively at pH 0, 1, 13, 14, 14.6 (HER).…
▽ More
Janus type Water-Splitting Catalysts have attracted highest attention as a tool of choice for solar to fuel conversion. AISI Ni 42 steel was upon harsh anodization converted in a bifunctional electrocatalyst. Oxygen evolution reaction- (OER) and hydrogen evolution reaction (HER) are highly efficiently and steadfast catalyzed at pH 7, 13, 14, 14.6 (OER) respectively at pH 0, 1, 13, 14, 14.6 (HER). The current density taken from long-term OER measurements in pH 7 buffer solution upon the electro activated steel at 491 mV overpotential was around 4 times higher (4 mA/cm2) in comparison with recently developed OER electrocatalysts. The very strong voltage-current behavior of the catalyst shown in OER polarization experiments at both pH 7 and at pH 13 were even superior to those known for IrO2-RuO2. No degradation of the catalyst was detected even when conditions close to standard industrial operations were applied to the catalyst. A stable Ni-, Fe- oxide based passivating layer sufficiently protected the bare metal for further oxidation. Quantitative charge to oxygen- (OER) and charge to hydrogen (HER) conversion was confirmed. High resolution XPS spectra showed that most likely gamma-NiO(OH) and FeO(OH) are the catalytic active OER and NiO is the catalytic active HER species.
△ Less
Submitted 21 March, 2017;
originally announced March 2017.
-
Real-time monitoring of the structure of ultra thin Fe$_3$O$_4$ films during growth on Nb-doped SrTiO$_3$(001)
Authors:
Olga Kuschel,
Wanja Spiess,
Tobias Schemme,
Juan Rubio-Zuazo,
Karsten Kuepper,
Joachim Wollschläger
Abstract:
In this work thin magnetite films were deposited on SrTiO$_3$ via reactive molecular beam epitaxy at different substrate temperatures. The growth process was monitored in-situ during deposition by means of x-ray diffraction. While the magnetite film grown at 400$^\circ$C shows a fully relaxed vertical lattice constant already in the early growth stages, the film deposited at 270$^\circ$C exhibits…
▽ More
In this work thin magnetite films were deposited on SrTiO$_3$ via reactive molecular beam epitaxy at different substrate temperatures. The growth process was monitored in-situ during deposition by means of x-ray diffraction. While the magnetite film grown at 400$^\circ$C shows a fully relaxed vertical lattice constant already in the early growth stages, the film deposited at 270$^\circ$C exhibits a strong vertical compressive strain and relaxes towards the bulk value with increasing film thickness. Furthermore, a lateral tensile strain was observed under these growth conditions although the inverse behavior is expected due to the lattice mismatch of -7.5%. Additionally, the occupancy of the A and B sublattices of magnetite with tetrahedral and octahedral sites was investigated showing a lower occupancy of the A sites compared to an ideal inverse spinel structure. The occupation of A sites decreases for a higher growth temperature. Thus, we assume a relocation of the iron ions from tetrahedral sites to octahedral vacancies forming a deficient rock salt lattice.
△ Less
Submitted 10 March, 2017;
originally announced March 2017.
-
Impact of strain and morphology on magnetic properties of Fe$_3$O$_4$/NiO bilayers grown on Nb:SrTiO$_3$(001) and MgO(001)
Authors:
Olga Kuschel,
Nico Pathé,
Tobias Schemme,
Kevin Ruwisch,
Jari Rodewald,
Ralph Buß,
Florian Bertram,
Timo Kuschel,
Karsten Kuepper,
Joachim Wollschläger
Abstract:
We present a comparative study on the morphology and structural as well as magnetic properties of crystalline Fe$_3$O$_4$/NiO bilayers grown on both MgO(001) and SrTiO$_3$(001) substrates by reactive molecular beam epitaxy. These structures are investigated by means of x-ray photoelectron spectroscopy, low energy electron diffraction, x-ray reflectivity and diffraction as well as vibrating sample…
▽ More
We present a comparative study on the morphology and structural as well as magnetic properties of crystalline Fe$_3$O$_4$/NiO bilayers grown on both MgO(001) and SrTiO$_3$(001) substrates by reactive molecular beam epitaxy. These structures are investigated by means of x-ray photoelectron spectroscopy, low energy electron diffraction, x-ray reflectivity and diffraction as well as vibrating sample magnetometry. While the lattice mismatch of NiO grown on MgO(001) is only 0.8%, it is exposed to a lateral lattice mismatch of -6.9% if grown on SrTiO$_3$. In the case of Fe$_3$O$_4$, the misfit strain on MgO(001) and SrTiO$_3$(001) amounts to 0.3% and -7.5%, respectively. To clarify the relaxation process of the bilayer system, the film thicknesses of the magnetite and nickel oxide films have been varied between 5 and 20nm. While NiO films are well ordered on both substrates, Fe$_3$O$_4$ films grown on NiO/SrTiO$_3$ exhibit a higher surface roughness as well as lower structural ordering compared to films grown on NiO/MgO. Further, NiO films grow pseudomorphic in the investigated thickness range on MgO substrates without any indication of relaxation, whereas on SrTiO$_3$ the NiO films show strong strain relaxation. Fe$_3$O$_4$ films exhibit also strong relaxation even for films of 5nm thickness on both NiO/MgO as well as on NiO/SrTiO$_3$. The magnetite layers on both substrates show a fourfold magnetic in-plane anisotropy with magnetic easy axes pointing in $\left\langle100\right\rangle$ directions. The coercive field is strongly enhanced for magnetite grown on NiO/SrTiO$_3$ due to higher density of structural defects, compared to magnetite grown on NiO/MgO.
△ Less
Submitted 5 June, 2018; v1 submitted 14 November, 2016;
originally announced November 2016.
-
Electronic and magnetic structure of epitaxial NiO/Fe$_3$O$_4$(001) heterostructures grown on MgO(001) and Nb-doped SrTiO$_3$(001)
Authors:
K. Kuepper,
O. Kuschel,
N. Pathé,
T. Schemme,
J. Schmalhorst,
A. Thomas,
E. Arenholz M. Gorgoi,
R. Ovsyannikov,
S. Bartkowski,
G. Reiss,
J. Wollschläger
Abstract:
We study the underlying chemical, electronic and magnetic properties of a number of magnetite based thin films. The main focus is placed onto NiO/Fe$_3$O$_4$(001) bilayers grown on MgO(001) and Nb-SrTiO$_3$(001) substrates. We compare the results with those obtained on pure Fe$_3$O$_4$(001) thin films. It is found that the magnetite layers are oxidized and Fe$^{3+}$ dominates at the surfaces due t…
▽ More
We study the underlying chemical, electronic and magnetic properties of a number of magnetite based thin films. The main focus is placed onto NiO/Fe$_3$O$_4$(001) bilayers grown on MgO(001) and Nb-SrTiO$_3$(001) substrates. We compare the results with those obtained on pure Fe$_3$O$_4$(001) thin films. It is found that the magnetite layers are oxidized and Fe$^{3+}$ dominates at the surfaces due to maghemite ($γ$-Fe$_2$O$_3$) formation, which decreases with increasing magnetite layer thickness. From a layer thickness of around 20 nm on the cationic distribution is close to that of stoichiometric Fe$_3$O$_4$. At the interface between NiO and Fe$_3$O$_4$ we find the Ni to be in a divalent valence state, with unambiguous spectral features in the Ni 2p core level x-ray photoelectron spectra typical for NiO. The formation of a significant NiFe$_2$O$_4$ interlayer can be excluded by means of XMCD. Magneto optical Kerr effect measurements reveal significant higher coercive fields compared to magnetite thin films grown on MgO(001), and a 45$^{\circ}$ rotated magnetic easy axis. We discuss the spin magnetic moments of the magnetite layers and find that the moment increases with increasing thin film thickness. At low thickness the NiO/Fe$_3$O$_4$ films grown on Nb-SrTiO$_3$ exhibits a significantly decreased spin magnetic moments. A thickness of 20 nm or above leads to spin magnetic moments close to that of bulk magnetite.
△ Less
Submitted 18 February, 2016;
originally announced February 2016.
-
From Fe$_3$O$_4$/NiO bilayers to NiFe$_2$O$_4$-like thin films through Ni interdiffusion
Authors:
O. Kuschel,
R. Buß,
W. Spiess,
T. Schemme,
J. Wöllermann,
K. Balinski,
T. Kuschel,
A. T. N'Diaye,
J. Wollschläger,
K. Kuepper
Abstract:
Ferrites with (inverse) spinel structure display a large variety of electronic and magnetic properties making some of them interesting for potential applications in spintronics. We investigate the thermally induced interdiffusion of Ni$^{2+}$ ions out of NiO into Fe$_3$O$_4$ ultrathin films resulting in off-stoichiometric nickelferrite-like thin layers. We synthesized epitaxial Fe$_3$O$_4$/NiO bil…
▽ More
Ferrites with (inverse) spinel structure display a large variety of electronic and magnetic properties making some of them interesting for potential applications in spintronics. We investigate the thermally induced interdiffusion of Ni$^{2+}$ ions out of NiO into Fe$_3$O$_4$ ultrathin films resulting in off-stoichiometric nickelferrite-like thin layers. We synthesized epitaxial Fe$_3$O$_4$/NiO bilayers on Nb-doped SrTiO$_3$(001) substrates by means of reactive molecular beam epitaxy. Subsequently, we performed an annealing cycle comprising three steps at temperatures of 400\,$^{\circ}$C, 600\,$^{\circ}$C, and 800\,$^{\circ}$C under an oxygen background atmosphere. We studied the changes of the chemical and electronic properties as result of each annealing step with help of hard x-ray photoelectron spectroscopy and found a rather homogenous distribution of Ni and Fe cations throughout the entire film after the overall annealing cycle. For one sample we observed a cationic distribution close to that of the spinel ferrite NiFe$_2$O$_4$. Further evidence comes from low energy electron diffraction patterns indicating a spinel type structure at the surface after annealing. Site and element specific hysteresis loops performed by x-ray magnetic circular dichroism uncovered the antiferrimagnetic alignment between the octahedral coordinated Ni$^{2+}$ and Fe$^{3+}$ ions and the Fe$^{3+}$ in tetrahedral coordination. We find a quite low coercive field of 0.02\,T, indicating a rather low defect concentration within the thin ferrite films.
△ Less
Submitted 18 February, 2016;
originally announced February 2016.
-
Structure and morphology of epitaxially grown Fe3O4/NiO bilayers on MgO(001)
Authors:
Tobias Schemme,
Olga Kuschel,
Florian Bertram,
Karsten Kuepper,
Joachim Wollschäger
Abstract:
Crystalline Fe3O4/NiO bilayers were grown on MgO(001) substrates using reactive molecular beam epitaxy to investigate their structural properties and their morphology. The film thickness either of the Fe3O4 film or of the NiO film has been varied to shed light on the relaxation of the bilayer system. The surface properties as studied by x-ray photo electron spectroscopy and low energy electron dif…
▽ More
Crystalline Fe3O4/NiO bilayers were grown on MgO(001) substrates using reactive molecular beam epitaxy to investigate their structural properties and their morphology. The film thickness either of the Fe3O4 film or of the NiO film has been varied to shed light on the relaxation of the bilayer system. The surface properties as studied by x-ray photo electron spectroscopy and low energy electron diffraction show clear evidence of stoichiometric well-ordered film surfaces. Based on the kinematic approach x-ray diffraction experiments were completely analyzed. As a result the NiO films grow pseudomorphic in the investigated thickness range (up to 34nm) while the Fe3O4 films relax continuously up to the thickness of 50nm. Although all diffraction data show well developed Laue fringes pointing to oxide films of very homogeneous thickness, the Fe3O4-NiO interface roughens continuously up to 1nm root-mean-square roughness with increasing NiO film thickness while the Fe3O4 surface is very smooth independent on the Fe3O4 film thickness. Finally, the Fe3O4-NiO interface spacing is similar to the interlayer spacing of the oxide films while the NiO-MgO interface is expanded.
△ Less
Submitted 3 February, 2015;
originally announced February 2015.
-
Link between local iron coordination, Fe 2p XPS core level line shape and Mg segregation into thin magnetite films grown on MgO(001)
Authors:
M. Suendorf,
T. Schemme,
A. Thomas,
J. Wollschläger,
K. Kuepper
Abstract:
A well ordered Fe(001) ultra thin film epitaxially grown on MgO(001) has been oxidized by post deposition annealing in oxygen atmosphere. LEED patterns indicate the formation of magnetite (Fe$_3$O$_4$) after one hour of oxygen exposure. The LEED pattern remains stable despite annealing the sample for further four hours. In contrast X-ray Photoelectron Spectroscopy (XPS) of the Fe $2p$ core levels…
▽ More
A well ordered Fe(001) ultra thin film epitaxially grown on MgO(001) has been oxidized by post deposition annealing in oxygen atmosphere. LEED patterns indicate the formation of magnetite (Fe$_3$O$_4$) after one hour of oxygen exposure. The LEED pattern remains stable despite annealing the sample for further four hours. In contrast X-ray Photoelectron Spectroscopy (XPS) of the Fe $2p$ core levels suggests the formation of an iron oxide comprising mostly of merely trivalent iron. This discrepancy is analyzed and discussed employing charge transfer multiplet calculations for the Fe $2p$ XPS spectra. We find that Mg ion segregation from the substrate into the magnetite thin film replacing octahedrally coordinated Fe$^{2+}$ ions and the excess occupation of octahedral sites which are unoccupied in the ideal inverse spinel structure are driving forces for the altered shape of the Fe $2p$ XPS spectra. Different potential models which might explain the nature of the Mg ion segregation into the magnetite films are discussed.
△ Less
Submitted 29 January, 2015;
originally announced January 2015.
-
An Asymptotic Preserving Two-Dimensional Staggered Grid Method for multiscale transport equations
Authors:
Kerstin Küpper,
Martin Frank,
Shi **
Abstract:
We propose a two-dimensional asymptotic preserving scheme for linear transport equations with diffusive scalings. It is an extension of the time splitting developed by **, Pareschi and Toscani [SINUM,2000], but uses spatial discretizations on staggered grids, which preserves the discrete diffusion limit with a more compact stencil. The first novelty of this paper is that we propose a staggering i…
▽ More
We propose a two-dimensional asymptotic preserving scheme for linear transport equations with diffusive scalings. It is an extension of the time splitting developed by **, Pareschi and Toscani [SINUM,2000], but uses spatial discretizations on staggered grids, which preserves the discrete diffusion limit with a more compact stencil. The first novelty of this paper is that we propose a staggering in two dimensions that requires fewer unknowns than one could have naively expected. The second contribution of this paper is that we rigorously analyze the scheme of **, Pareschi, and Toscani [SINUM,2000] We show that the scheme is AP and obtain an explicit CFL condition, which couples a hyperbolic and a parabolic condition. This type of condition is common for asymptotic preserving schemes and guarantees uniform stability with respect to the mean free path. In addition, we obtain an upper bound on the relaxation parameter, which is the crucial parameter of the used time discretization. Several numerical examples are provided to verify the accuracy and asymptotic property of the scheme.
△ Less
Submitted 13 April, 2016; v1 submitted 9 January, 2015;
originally announced January 2015.
-
Sign change in the tunnel magnetoresistance of Fe3O4/MgO/Co-Fe-B magnetic tunnel junctions depending on the annealing temperature and the interface treatment
Authors:
Luca Marnitz,
Karsten Rott,
Stefan Niehörster,
Christoph Klewe,
Daniel Meier,
Savio Fabretti,
Matthäus Witziok,
Andreas Krampf,
Olga Kuschel,
Tobias Schemme,
Karsten Kuepper,
Joachim Wollschläger,
Andy Thomas,
Günter Reiss,
Timo Kuschel
Abstract:
Magnetite (Fe3O4) is an eligible candidate for magnetic tunnel junctions (MTJs) since it shows a high spin polarization at the Fermi level as well as a high Curie temperature of 585°C. In this study, Fe3O4/MgO/Co-Fe-B MTJs were manufactured. A sign change in the TMR is observed after annealing the MTJs at temperatures between 200°C and 280°C. Our findings suggest an Mg interdiffusion from the MgO…
▽ More
Magnetite (Fe3O4) is an eligible candidate for magnetic tunnel junctions (MTJs) since it shows a high spin polarization at the Fermi level as well as a high Curie temperature of 585°C. In this study, Fe3O4/MgO/Co-Fe-B MTJs were manufactured. A sign change in the TMR is observed after annealing the MTJs at temperatures between 200°C and 280°C. Our findings suggest an Mg interdiffusion from the MgO barrier into the Fe3O4 as the reason for the change of the TMR. Additionally, different treatments of the magnetite interface (argon bombardment, annealing at 200°C in oxygen atmosphere) during the preparation of the MTJs have been studied regarding their effect on the performance of the MTJs. A maximum TMR of up to -12% could be observed using both argon bombardment and annealing in oxygen atmosphere, despite exposing the magnetite surface to atmospheric conditions before the deposition of the MgO barrier.
△ Less
Submitted 10 April, 2015; v1 submitted 23 December, 2014;
originally announced December 2014.
-
Physical characteristics and cation distribution of NiFe2O4 thin films with high resistivity prepared by reactive co-sputtering
Authors:
Christoph Klewe,
Markus Meinert,
Alexander Boehnke,
Karsten Kuepper,
Elke Arenholz,
Arunava Gupta,
Jan-Michael Schmalhorst,
Timo Kuschel,
Guenter Reiss
Abstract:
We fabricated NiFe2O thin films on MgAl2O4 (001) substrates by reactive dc magnetron co-sputtering in a pure oxygen atmosphere at different substrate temperatures. The film properties were investigated by various techniques with a focus on their structure, surface topography, magnetic characteristics, and transport properties. Structural analysis revealed a good crystallization with epitaxial grow…
▽ More
We fabricated NiFe2O thin films on MgAl2O4 (001) substrates by reactive dc magnetron co-sputtering in a pure oxygen atmosphere at different substrate temperatures. The film properties were investigated by various techniques with a focus on their structure, surface topography, magnetic characteristics, and transport properties. Structural analysis revealed a good crystallization with epitaxial growth and low roughness and a similar quality as in films grown by pulsed laser deposition. Electrical conductivity measurements showed high room temperature resistivity (12 Ohmm), but low activation energy, indicating an extrinsic transport mechanism. A band gap of about 1.55 eV was found by optical spectroscopy. Detailed x-ray spectroscopy studies confirmed the samples to be ferrimagnetic with fully compensated Fe moments. By comparison with multiplet calculations of the spectra we found that the cation valencies are to a large extent Ni2+ and Fe3+.
△ Less
Submitted 4 December, 2013;
originally announced December 2013.
-
Spinel ferrite nanocrystals embedded inside ZnO: magnetic, electronic and magneto-transport properties
Authors:
Shengqiang Zhou,
K. Potzger,
Qingyu Xu,
K. Kuepper,
G. Talut,
D. Marko,
A. Muecklich,
M. Helm,
J. Fassbender,
E. Arenholz,
H. Schmidt
Abstract:
In this paper we show that spinel ferrite nanocrystals (NiFe2O4, and CoFe2O4) can be texturally embedded inside a ZnO matrix by ion implantation and post-annealing. The two kinds of ferrites show different magnetic properties, e.g. coercivity and magnetization. Anomalous Hall effect and positive magnetoresistance have been observed. Our study suggests a ferrimagnet/semiconductor hybrid system fo…
▽ More
In this paper we show that spinel ferrite nanocrystals (NiFe2O4, and CoFe2O4) can be texturally embedded inside a ZnO matrix by ion implantation and post-annealing. The two kinds of ferrites show different magnetic properties, e.g. coercivity and magnetization. Anomalous Hall effect and positive magnetoresistance have been observed. Our study suggests a ferrimagnet/semiconductor hybrid system for potential applications in magneto-electronics. This hybrid system can be tuned by selecting different transition metal ions (from Mn to Zn) to obtain various magnetic and electronic properties.
△ Less
Submitted 24 August, 2009;
originally announced August 2009.
-
Ferromagnetism and suppression of metallic clusters in Fe implanted ZnO - a phenomenon related to defects?
Authors:
Shengqiang Zhou,
K. Potzger,
G. Talut,
H. Reuther,
K. Kuepper,
J. Grenzer,
Qingyu Xu,
A. Muecklich M. Helm,
J. Fassbender,
E. Arenholz
Abstract:
We investigated ZnO(0001) single crystals annealed in high vacuum with respect to their magnetic properties and cluster formation tendency after implant-do** with Fe. While metallic Fe cluster formation is suppressed, no evidence for the relevance of the Fe magnetic moment for the observed ferromagnetism was found. The latter along with the cluster suppression is discussed with respect to defe…
▽ More
We investigated ZnO(0001) single crystals annealed in high vacuum with respect to their magnetic properties and cluster formation tendency after implant-do** with Fe. While metallic Fe cluster formation is suppressed, no evidence for the relevance of the Fe magnetic moment for the observed ferromagnetism was found. The latter along with the cluster suppression is discussed with respect to defects in the ZnO host matrix, since the crystalline quality of the substrates was lowered due to the preparation as observed by x-ray diffraction.
△ Less
Submitted 4 August, 2009;
originally announced August 2009.
-
Suppression of secondary phase formation in Fe implanted ZnO single crystals
Authors:
K. Potzger,
Shengqiang Zhou,
H. Reuther,
K. Kuepper,
G. Talut,
M. Helm,
J. Fassbender,
J. D. Denlinger
Abstract:
Unwanted secondary phases are one of the major problems in diluted magnetic semiconductor creation. Here, the authors show possibilities to avoid such phases in Fe implanted and postannealed ZnO(0001) single crystals. While -Fe nanoparticles are formed after such do** in as-polished crystals, high temperature (1273 K) annealing in O2 or high vacuum before implantation suppresses these phases.…
▽ More
Unwanted secondary phases are one of the major problems in diluted magnetic semiconductor creation. Here, the authors show possibilities to avoid such phases in Fe implanted and postannealed ZnO(0001) single crystals. While -Fe nanoparticles are formed after such do** in as-polished crystals, high temperature (1273 K) annealing in O2 or high vacuum before implantation suppresses these phases. Thus, the residual saturation magnetization in the preannealed ZnO single crystals is about 20 times lower than for the as-polished ones and assigned to indirect coupling between isolated Fe ions rather than to clusters.
△ Less
Submitted 4 August, 2009;
originally announced August 2009.
-
Absence of ferromagnetism in V-implanted ZnO single crystals
Authors:
Shengqiang Zhou,
K. Potzger,
H. Reuther,
K. Kuepper,
W. Skorupa,
M. Helm,
J. Fassbender
Abstract:
The structural and magnetic properties of V doped ZnO are presented. V ions were introduced into hydrothermal ZnO single crystals by ion implantation with fluences of 1.2*10^16 to 6*10^16 cm^-2. Post-implantation annealing was performed in high vacuum from 823 K to 1023 K. The ZnO host material still partly remains in a crystalline state after irradiation, and is partly recovered by annealing. T…
▽ More
The structural and magnetic properties of V doped ZnO are presented. V ions were introduced into hydrothermal ZnO single crystals by ion implantation with fluences of 1.2*10^16 to 6*10^16 cm^-2. Post-implantation annealing was performed in high vacuum from 823 K to 1023 K. The ZnO host material still partly remains in a crystalline state after irradiation, and is partly recovered by annealing. The V ions show a thermal mobility as revealed by depth profile Auger electron spectroscopy. Synchrotron radiation x-ray diffraction revealed no secondary phase formation which indicates the substitution of V onto Zn site. However in all samples no pronounced ferromagnetism was observed down to 5 K by a superconducting quantum interference device magnetometer.
△ Less
Submitted 14 December, 2006;
originally announced December 2006.
-
Electronic structure study by means of X-ray spectroscopy and theoretical calculations of the "ferric star" single molecule magnet
Authors:
A. F. Takacs,
M. Neumann,
A. V. Postnikov,
K. Kuepper,
A. Scheurer,
S. Sperner,
R. W. Saalfrank,
K. C. Prince
Abstract:
The electronic structure of the single molecule magnet system M[Fe(L)2]3*4CHCl3 (M=Fe,Cr; L=CH3N(CH2CH2O)2) has been studied using X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, soft X-ray emission spectroscopy, and density functional calculations. There is good agreement between theoretical calculations and experimental data. The valence band mainly consists of three bands bet…
▽ More
The electronic structure of the single molecule magnet system M[Fe(L)2]3*4CHCl3 (M=Fe,Cr; L=CH3N(CH2CH2O)2) has been studied using X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, soft X-ray emission spectroscopy, and density functional calculations. There is good agreement between theoretical calculations and experimental data. The valence band mainly consists of three bands between 2 eV and 30 eV. Both theory and experiments show that the top of the valence band is dominated by the hybridization between Fe 3d and O 2p bands. From the shape of the Fe 2p spectra it is argued that Fe in the molecule is most likely in the 2+ charge state. Its neighboring atoms (O,N) exhibit a magnetic polarisation yielding effective spin S=5/2 per iron atom, giving a high spin state molecule with a total S=5 effective spin for the case of M = Fe.
△ Less
Submitted 23 November, 2005; v1 submitted 21 November, 2005;
originally announced November 2005.
