Showing 1–36 of 36 results for author: Kubik, D

A Measurement of Gravitational Lensing of the Cosmic Microwave Background Using SPT-3G 2018 Data

Authors: Z. Pan, F. Bianchini, W. L. K. Wu, P. A. R. Ade, Z. Ahmed, E. Anderes, A. J. Anderson, B. Ansarinejad, M. Archipley, K. Aylor, L. Balkenhol, P. S. Barry, R. Basu Thakur, K. Benabed, A. N. Bender, B. A. Benson, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, E. Camphuis, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang , et al. (111 additional authors not shown)

Abstract: We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of th… ▽ More We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of the lensing measurements, and report a minimum-variance combined lensing power spectrum over angular multipoles of $50<L<2000$, which we use to constrain cosmological models. When analyzed alone and jointly with primary cosmic microwave background (CMB) spectra within the $Λ$CDM model, our lensing amplitude measurements are consistent with measurements from SPT-SZ, SPTpol, ACT, and Planck. Incorporating loose priors on the baryon density and other parameters including uncertainties on a foreground bias template, we obtain a $1σ$ constraint on $σ_8 Ω_{\rm m}^{0.25}=0.595 \pm 0.026$ using the SPT-3G 2018 lensing data alone, where $σ_8$ is a common measure of the amplitude of structure today and $Ω_{\rm m}$ is the matter density parameter. Combining SPT-3G 2018 lensing measurements with baryon acoustic oscillation (BAO) data, we derive parameter constraints of $σ_8 = 0.810 \pm 0.033$, $S_8 \equiv σ_8(Ω_{\rm m}/0.3)^{0.5}= 0.836 \pm 0.039$, and Hubble constant $H_0 =68.8^{+1.3}_{-1.6}$ km s$^{-1}$ Mpc$^{-1}$. Using CMB anisotropy and lensing measurements from SPT-3G only, we provide independent constraints on the spatial curvature of $Ω_{K} = 0.014^{+0.023}_{-0.026}$ (95% C.L.) and the dark energy density of $Ω_Λ= 0.722^{+0.031}_{-0.026}$ (68% C.L.). When combining SPT-3G lensing data with SPT-3G CMB anisotropy and BAO data, we find an upper limit on the sum of the neutrino masses of $\sum m_ν< 0.30$ eV (95% C.L.). △ Less

Submitted 29 January, 2024; v1 submitted 22 August, 2023; originally announced August 2023.

Comments: Bandpower and likelihood data available at https://pole.uchicago.edu/public/data/spt3g_2018_lensing/

Journal ref: Physical Review D 108.12 (2023): 122005

Conceptual Design of the Modular Detector and Readout System for the CMB-S4 survey experiment

Authors: D. R. Barron, Z. Ahmed, J. Aguilar, A. J. Anderson, C. F. Baker, P. S. Barry, J. A. Beall, A. N. Bender, B. A. Benson, R. W. Besuner, T. W. Cecil, C. L. Chang, S. C. Chapman, G. E. Chesmore, G. Derylo, W. B. Doriese, S. M. Duff, T. Elleflot, J. P. Filippini, B. Flaugher, J. G. Gomez, P. K. Grimes, R. Gualtieri, I. Gullett, G. Haller , et al. (25 additional authors not shown)

Abstract: We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental… ▽ More We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental building block of the detector and readout system is a detector module package operated at 100 mK, which is connected to a readout and amplification chain that carries signals out to room temperature. It uses arrays of feedhorn-coupled orthomode transducers (OMT) that collect optical power from the sky onto dc-voltage-biased transition-edge sensor (TES) bolometers. The resulting current signal in the TESs is then amplified by a two-stage cryogenic Superconducting Quantum Interference Device (SQUID) system with a time-division multiplexer to reduce wire count, and matching room-temperature electronics to condition and transmit signals to the data acquisition system. Sensitivity and systematics requirements are being developed for the detector and readout system over a wide range of observing bands (20 to 300 GHz) and optical powers to accomplish CMB-S4's science goals. While the design incorporates the successes of previous generations of CMB instruments, CMB-S4 requires an order of magnitude more detectors than any prior experiment. This requires fabrication of complex superconducting circuits on over 10 square meters of silicon, as well as significant amounts of precision wiring, assembly and cryogenic testing. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Comments: 25 pages, 15 figures, presented at and published in the proceedings of SPIE Astronomical Telescopes and Instrumentation 2022

Snowmass 2021 CMB-S4 White Paper

Authors: Kevork Abazajian, Arwa Abdulghafour, Graeme E. Addison, Peter Adshead, Zeeshan Ahmed, Marco Ajello, Daniel Akerib, Steven W. Allen, David Alonso, Marcelo Alvarez, Mustafa A. Amin, Mandana Amiri, Adam Anderson, Behzad Ansarinejad, Melanie Archipley, Kam S. Arnold, Matt Ashby, Han Aung, Carlo Baccigalupi, Carina Baker, Abhishek Bakshi, Debbie Bard, Denis Barkats, Darcy Barron, Peter S. Barry , et al. (331 additional authors not shown)

Abstract: This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan. This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021. arXiv admin note: substantial text overlap with arXiv:1908.01062, arXiv:1907.04473

Asteroid Measurements at Millimeter Wavelengths with the South Pole Telescope

Authors: P. M. Chichura, A. Foster, C. Patel, N. Ossa-Jaen, P. A. R. Ade, Z. Ahmed, A. J. Anderson, M. Archipley, J. E. Austermann, J. S. Avva, L. Balkenhol, P. S. Barry, R. Basu Thakur, J. A. Beall, K. Benabed, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil , et al. (119 additional authors not shown)

Abstract: We present the first measurements of asteroids in millimeter wavelength (mm) data from the South Pole Telescope (SPT), which is used primarily to study the cosmic microwave background (CMB). We analyze maps of two $\sim270$ deg$^2$ sky regions near the ecliptic plane, each observed with the SPTpol camera $\sim100$ times over one month. We subtract the mean of all maps of a given field, removing st… ▽ More We present the first measurements of asteroids in millimeter wavelength (mm) data from the South Pole Telescope (SPT), which is used primarily to study the cosmic microwave background (CMB). We analyze maps of two $\sim270$ deg$^2$ sky regions near the ecliptic plane, each observed with the SPTpol camera $\sim100$ times over one month. We subtract the mean of all maps of a given field, removing static sky signal, and then average the mean-subtracted maps at known asteroid locations. We detect three asteroids$\text{ -- }$(324) Bamberga, (13) Egeria, and (22) Kalliope$\text{ -- }$with signal-to-noise ratios (S/N) of 11.2, 10.4, and 6.1, respectively, at 2.0 mm (150 GHz); we also detect (324) Bamberga with S/N of 4.1 at 3.2 mm (95 GHz). We place constraints on these asteroids' effective emissivities, brightness temperatures, and light curve modulation amplitude. Our flux density measurements of (324) Bamberga and (13) Egeria roughly agree with predictions, while our measurements of (22) Kalliope suggest lower flux, corresponding to effective emissivities of $0.66 \pm 0.11$ at 2.0 mm and $<0.47$ at 3.2mm. We predict the asteroids detectable in other SPT datasets and find good agreement with detections of (772) Tanete and (1093) Freda in recent data from the SPT-3G camera, which has $\sim10 \times$ the map** speed of SPTpol. This work is the first focused analysis of asteroids in data from CMB surveys, and it demonstrates we can repurpose historic and future datasets for asteroid studies. Future SPT measurements can help constrain the distribution of surface properties over a larger asteroid population. △ Less

Submitted 21 April, 2023; v1 submitted 2 February, 2022; originally announced February 2022.

Comments: 21 pages, 9 figures

Journal ref: 2022 ApJ 936 173

The Design and Integrated Performance of SPT-3G

Authors: J. A. Sobrin, A. J. Anderson, A. N. Bender, B. A. Benson, D. Dutcher, A. Foster, N. Goeckner-Wald, J. Montgomery, A. Nadolski, A. Rahlin, P. A. R. Ade, Z. Ahmed, E. Anderes, M. Archipley, J. E. Austermann, J. S. Avva, K. Aylor, L. Balkenhol, P. S. Barry, R. Basu Thakur, K. Benabed, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant , et al. (98 additional authors not shown)

Abstract: SPT-3G is the third survey receiver operating on the South Pole Telescope dedicated to high-resolution observations of the cosmic microwave background (CMB). Sensitive measurements of the temperature and polarization anisotropies of the CMB provide a powerful dataset for constraining cosmology. Additionally, CMB surveys with arcminute-scale resolution are capable of detecting galaxy clusters, mill… ▽ More SPT-3G is the third survey receiver operating on the South Pole Telescope dedicated to high-resolution observations of the cosmic microwave background (CMB). Sensitive measurements of the temperature and polarization anisotropies of the CMB provide a powerful dataset for constraining cosmology. Additionally, CMB surveys with arcminute-scale resolution are capable of detecting galaxy clusters, millimeter-wave bright galaxies, and a variety of transient phenomena. The SPT-3G instrument provides a significant improvement in map** speed over its predecessors, SPT-SZ and SPTpol. The broadband optics design of the instrument achieves a 430 mm diameter image plane across observing bands of 95 GHz, 150 GHz, and 220 GHz, with 1.2 arcmin FWHM beam response at 150 GHz. In the receiver, this image plane is populated with 2690 dual-polarization, tri-chroic pixels (~16000 detectors) read out using a 68X digital frequency-domain multiplexing readout system. In 2018, SPT-3G began a multiyear survey of 1500 deg$^{2}$ of the southern sky. We summarize the unique optical, cryogenic, detector, and readout technologies employed in SPT-3G, and we report on the integrated performance of the instrument. △ Less

Submitted 25 February, 2022; v1 submitted 21 June, 2021; originally announced June 2021.

Comments: 25 pages, 11 figures. Accepted for publication in ApJS

Report number: FERMILAB-PUB-21-291-AE

Journal ref: ApJS 258 42 (2022)

Performance and characterization of the SPT-3G digital frequency-domain multiplexed readout system using an improved noise and crosstalk model

Authors: J. Montgomery, P. A. R. Ade, Z. Ahmed, E. Anderes, A. J. Anderson, M. Archipley, J. S. Avva, K. Aylor, L. Balkenhol, P. S. Barry, R. Basu Thakur, K. Benabed, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, P. Chaubal, G. Chen , et al. (96 additional authors not shown)

Abstract: The third generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5x expansion in the readout op… ▽ More The third generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5x expansion in the readout operating bandwidth has enabled the use of this large focal plane, and SPT-3G performance meets the forecasting targets relevant to its science objectives. However, the electrical dynamics of the higher-bandwidth readout differ from predictions based on models of the SPTpol system due to the higher frequencies used, and parasitic impedances associated with new cryogenic electronic architecture. To address this, we present an updated derivation for electrical crosstalk in higher-bandwidth DfMUX systems, and identify two previously uncharacterized contributions to readout noise, which become dominant at high bias frequency. The updated crosstalk and noise models successfully describe the measured crosstalk and readout noise performance of SPT-3G. These results also suggest specific changes to warm electronics component values, wire-harness properties, and SQUID parameters, to improve the readout system for future experiments using DfMUX, such as the LiteBIRD space telescope. △ Less

Submitted 21 February, 2022; v1 submitted 29 March, 2021; originally announced March 2021.

Comments: Accepted to the Journal of Astronomical Telescopes, Instruments, and Systems

Journal ref: J. Astron. Telesc. Instrum. Syst. 8(1) 014001 (8 January 2022)

Constraints on $Λ$CDM Extensions from the SPT-3G 2018 $EE$ and $TE$ Power Spectra

Authors: L. Balkenhol, D. Dutcher, P. A. R. Ade, Z. Ahmed, E. Anderes, A. J. Anderson, M. Archipley, J. S. Avva, K. Aylor, P. S. Barry, R. Basu Thakur, K. Benabed, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, P. Chaubal, G. Chen , et al. (95 additional authors not shown)

Abstract: We present constraints on extensions to the $Λ$CDM cosmological model from measurements of the $E$-mode polarization auto-power spectrum and the temperature-$E$-mode cross-power spectrum of the cosmic microwave background (CMB) made using 2018 SPT-3G data. The extensions considered vary the primordial helium abundance, the effective number of relativistic degrees of freedom, the sum of neutrino ma… ▽ More We present constraints on extensions to the $Λ$CDM cosmological model from measurements of the $E$-mode polarization auto-power spectrum and the temperature-$E$-mode cross-power spectrum of the cosmic microwave background (CMB) made using 2018 SPT-3G data. The extensions considered vary the primordial helium abundance, the effective number of relativistic degrees of freedom, the sum of neutrino masses, the relativistic energy density and mass of a sterile neutrino, and the mean spatial curvature. We do not find clear evidence for any of these extensions, from either the SPT-3G 2018 dataset alone or in combination with baryon acoustic oscillation and \textit{Planck} data. None of these model extensions significantly relax the tension between Hubble-constant, $H_0$, constraints from the CMB and from distance-ladder measurements using Cepheids and supernovae. The addition of the SPT-3G 2018 data to \textit{Planck} reduces the square-root of the determinants of the parameter covariance matrices by factors of $1.3 - 2.0$ across these models, signaling a substantial reduction in the allowed parameter volume. We also explore CMB-based constraints on $H_0$ from combined SPT, \textit{Planck}, and ACT DR4 datasets. While individual experiments see some indications of different $H_0$ values between the $TT$, $TE$, and $EE$ spectra, the combined $H_0$ constraints are consistent between the three spectra. For the full combined datasets, we report $H_0 = 67.49 \pm 0.53\,\mathrm{km\,s^{-1}\,Mpc^{-1}}$, which is the tightest constraint on $H_0$ from CMB power spectra to date and in $4.1\,σ$ tension with the most precise distance-ladder-based measurement of $H_0$. The SPT-3G survey is planned to continue through at least 2023, with existing maps of combined 2019 and 2020 data already having $\sim3.5\times$ lower noise than the maps used in this analysis. △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: Submitted to PRD; 19 pages, 7 figures

Journal ref: Phys. Rev. D 104, 083509 (2021)

Detection of Galactic and Extragalactic Millimeter-Wavelength Transient Sources with SPT-3G

Authors: S. Guns, A. Foster, C. Daley, A. Rahlin, N. Whitehorn, P. A. R. Ade, Z. Ahmed, E. Anderes, A. J. Anderson, M. Archipley, J. S. Avva, K. Aylor, L. Balkenhol, P. S. Barry, R. Basu Thakur, K. Benabed, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter , et al. (97 additional authors not shown)

Abstract: High-angular-resolution cosmic microwave background experiments provide a unique opportunity to conduct a survey of time-variable sources at millimeter wavelengths, a population which has primarily been understood through follow-up measurements of detections in other bands. Here we report the first results of an astronomical transient survey with the South Pole Telescope (SPT) using the SPT-3G cam… ▽ More High-angular-resolution cosmic microwave background experiments provide a unique opportunity to conduct a survey of time-variable sources at millimeter wavelengths, a population which has primarily been understood through follow-up measurements of detections in other bands. Here we report the first results of an astronomical transient survey with the South Pole Telescope (SPT) using the SPT-3G camera to observe 1500 square degrees of the southern sky. The observations took place from March to November 2020 in three bands centered at 95, 150, and 220 GHz. This survey yielded the detection of fifteen transient events from sources not previously detected by the SPT. The majority are associated with variable stars of different types, expanding the number of such detected flares by more than a factor of two. The stellar flares are unpolarized and bright, in some cases exceeding 1 Jy, and have durations from a few minutes to several hours. Another population of detected events last for 2--3 weeks and appear to be extragalactic in origin. Though data availability at other wavelengths is limited, we find evidence for concurrent optical activity for two of the stellar flares. Future data from SPT-3G and forthcoming instruments will provide real-time detection of millimeter-wave transients on timescales of minutes to months. △ Less

Submitted 8 June, 2021; v1 submitted 10 March, 2021; originally announced March 2021.

Comments: 14 pages, 9 figures; accepted to ApJ 5/27

Journal ref: ApJ 916 98 (2021)

Measurements of the E-Mode Polarization and Temperature-E-Mode Correlation of the CMB from SPT-3G 2018 Data

Authors: D. Dutcher, L. Balkenhol, P. A. R. Ade, Z. Ahmed, E. Anderes, A. J. Anderson, M. Archipley, J. S. Avva, K. Aylor, P. S. Barry, R. Basu Thakur, K. Benabed, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, P. Chaubal, G. Chen , et al. (96 additional authors not shown)

Abstract: We present measurements of the $E$-mode ($EE$) polarization power spectrum and temperature-$E$-mode ($TE$) cross-power spectrum of the cosmic microwave background using data collected by SPT-3G, the latest instrument installed on the South Pole Telescope. This analysis uses observations of a 1500 deg$^2$ region at 95, 150, and 220 GHz taken over a four month period in 2018. We report binned values… ▽ More We present measurements of the $E$-mode ($EE$) polarization power spectrum and temperature-$E$-mode ($TE$) cross-power spectrum of the cosmic microwave background using data collected by SPT-3G, the latest instrument installed on the South Pole Telescope. This analysis uses observations of a 1500 deg$^2$ region at 95, 150, and 220 GHz taken over a four month period in 2018. We report binned values of the $EE$ and $TE$ power spectra over the angular multipole range $300 \le \ell < 3000$, using the multifrequency data to construct six semi-independent estimates of each power spectrum and their minimum-variance combination. These measurements improve upon the previous results of SPTpol across the multipole ranges $300 \le \ell \le 1400$ for $EE$ and $300 \le \ell \le 1700$ for $TE$, resulting in constraints on cosmological parameters comparable to those from other current leading ground-based experiments. We find that the SPT-3G dataset is well-fit by a $Λ$CDM cosmological model with parameter constraints consistent with those from Planck and SPTpol data. From SPT-3G data alone, we find $H_0 = 68.8 \pm 1.5 \mathrm{km\,s^{-1}\,Mpc^{-1}}$ and $σ_8 = 0.789 \pm 0.016$, with a gravitational lensing amplitude consistent with the $Λ$CDM prediction ($A_L = 0.98 \pm 0.12$). We combine the SPT-3G and the Planck datasets and obtain joint constraints on the $Λ$CDM model. The volume of the 68% confidence region in six-dimensional $Λ$CDM parameter space is reduced by a factor of 1.5 compared to Planck-only constraints, with only slight shifts in central values. We note that the results presented here are obtained from data collected during just half of a typical observing season with only part of the focal plane operable, and that the active detector count has since nearly doubled for observations made with SPT-3G after 2018. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Journal ref: Phys. Rev. D 104, 022003 (2021)

Broadband, millimeter-wave antireflection coatings for large-format, cryogenic aluminum oxide optics

Authors: A. Nadolski, J. D. Vieira, J. A. Sobrin, A. M. Kofman, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, L. Bryant, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, J. R. Cheshire IV, G. E. Chesmore, J. F. Cliche, A. Cukierman, T. de Haan, M. Dierickx, J. Ding, D. Dutcher, W. Everett , et al. (64 additional authors not shown)

Abstract: We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of com… ▽ More We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of commercially-available, polytetrafluoroethylene-based, dielectric sheet material. The lenslet coating is molded to fit the 150 mm diameter arrays directly while the large-diameter lenses are coated using a tiled approach. We review the fabrication processes for both prescriptions then discuss laboratory measurements of their transmittance and reflectance. In addition, we present the inferred refractive indices and loss tangents for the coating materials and the aluminum oxide substrate. We find that at 150 GHz and 300 K the large-format coating sample achieves (97 +/- 2)% transmittance and the lenslet coating sample achieves (94 +/- 3)% transmittance. △ Less

Submitted 2 March, 2020; v1 submitted 6 December, 2019; originally announced December 2019.

Comments: 19 pages, 11 figures; submitted 05 Dec 2019, accepted 26 Feb 2020

Journal ref: Applied Optics, Vol. 59, Issue 10, pp. 3285-3295 (2020)

Particle Physics with the Cosmic Microwave Background with SPT-3G

Authors: J. S. Avva, P. A. R. Ade, Z. Ahmed, A. J. Anderson, K. Aylor, R. Basu Thakur, A. N. Bender, B. A. Benson, L. E. Bleem, S. Bocquet, L. Bryant, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, T. M. Crawford, A. Cukierman, T. de Haan, J. Ding, M. A. Dobbs, S. Dodelson, D. Dutcher, W. Everett, K. R. Ferguson, A. Foster , et al. (63 additional authors not shown)

Abstract: The cosmic microwave background (CMB) encodes information about the content and evolution of the universe. The presence of light, weakly interacting particles impacts the expansion history of the early universe, which alters the temperature and polarization anisotropies of the CMB. In this way, current measurements of the CMB place interesting constraints on the neutrino energy density and mass, a… ▽ More The cosmic microwave background (CMB) encodes information about the content and evolution of the universe. The presence of light, weakly interacting particles impacts the expansion history of the early universe, which alters the temperature and polarization anisotropies of the CMB. In this way, current measurements of the CMB place interesting constraints on the neutrino energy density and mass, as well as on the abundance of other possible light relativistic particle species. We present the status of an on-going 1500 sq. deg. survey with the SPT-3G receiver, a new mm-wavelength camera on the 10-m diameter South Pole Telescope (SPT). The SPT-3G camera consists of 16,000 superconducting transition edge sensors, a 10x increase over the previous generation camera, which allows it to map the CMB with an unprecedented combination of sensitivity and angular resolution. We highlight projected constraints on the abundance of sterile neutrinos and the sum of the neutrino masses for the SPT-3G survey, which could help determine the neutrino mass hierarchy. △ Less

Submitted 18 November, 2019; originally announced November 2019.

Comments: 6 pages, 2 figures, TAUP 2019

On the Homogeneity of TiN Kinetic Inductance Detectors Produced through Atomic Layer Deposition

Authors: Israel Hernandez, Martin Makler, Juan Estrada, Clecio R. Bom, Donna Kubik, Julian Amette, Jorge Montes, Andrew Leptop

Abstract: The non-homogeneity in the critical temperature $T_{c}$ of an Microwave Kinetic Inductance Detector (MKID) could be caused by non-uniformity in the deposition process of the thin superconducting film. This produces low percent yield and frequency collision in the readout of the MKIDs. Here, we show the homogeneity that offers Atomic Layer Deposition (ALD). We report an improvement of up to a facto… ▽ More The non-homogeneity in the critical temperature $T_{c}$ of an Microwave Kinetic Inductance Detector (MKID) could be caused by non-uniformity in the deposition process of the thin superconducting film. This produces low percent yield and frequency collision in the readout of the MKIDs. Here, we show the homogeneity that offers Atomic Layer Deposition (ALD). We report an improvement of up to a factor of 50 in the fractional variation of the $T_{c}$ for TiN MKIDs fabricated with Atomic Layer Deposition in comparison with MKIDs fabricated with sputtering. We measured the critical temperature of 48 resonators. We extracted the $T_{c}$ of the MKIDs by fitting the fractional resonance frequency to the complex conductivity of their resonators. We observed uniformity on the critical temperature for MKIDs belonging to the same fabrication process, with a maximum change in the $T_{c}$ of 60 mK for MKIDs fabricated on different wafers. △ Less

Submitted 14 November, 2019; originally announced November 2019.

Performance of Al-Mn Transition-Edge Sensor Bolometers in SPT-3G

Authors: A. J. Anderson, P. A. R. Ade, Z. Ahmed, J. S. Avva, P. S. Barry, R. Basu Thakur, A. N. Bender, B. A. Benson, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, H. -M. Cho, J. F. Cliche, A. Cukierman, T. de Haan, E. V. Denison, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, K. R. Ferguson, A. Foster , et al. (64 additional authors not shown)

Abstract: SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of the… ▽ More SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of these detector wafers was replaced by a new wafer fabricated with Al-Mn TESs instead of the Ti/Au design originally deployed for SPT-3G. We present the results of in-lab characterization and on-sky performance of this Al-Mn wafer, including electrical and thermal properties, optical efficiency measurements, and noise-equivalent temperature. In addition, we discuss and account for several calibration-related systematic errors that affect measurements made using frequency-domain multiplexing readout electronics. △ Less

Submitted 27 July, 2019; originally announced July 2019.

Comments: 9 pages, 5 figures, submitted to the Journal of Low Temperature Physics: LTD18 Special Edition

Report number: FERMILAB-PUB-19-359-AE

On-sky performance of the SPT-3G frequency-domain multiplexed readout

Authors: A. N. Bender, A. J. Anderson, J. S. Avva, P. A. R. Ade, Z. Ahmed, P. S. Barry, R. Basu Thakur, B. A. Benson, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, H. -M. Cho, J. F. Cliche, A. Cukierman, T. de Haan, E. V. Denison, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, K. R. Ferguson, A. Foster , et al. (64 additional authors not shown)

Abstract: Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current… ▽ More Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current receiver on the South Pole Telescope, SPT-3G, uses a 68x fMux system to operate its large-format camera of $\sim$16,000 TES bolometers. We present here the successful implementation and performance of the SPT-3G readout as measured on-sky. Characterization of the noise reveals a median pair-differenced 1/f knee frequency of 33 mHz, indicating that low-frequency noise in the readout will not limit SPT-3G's measurements of sky power on large angular scales. Measurements also show that the median readout white noise level in each of the SPT-3G observing bands is below the expectation for photon noise, demonstrating that SPT-3G is operating in the photon-noise-dominated regime. △ Less

Submitted 25 July, 2019; originally announced July 2019.

Comments: 9 pages, 5 figures submitted to the Journal of Low Temperature Physics: LTD18 Special Edition

Design and Bolometer Characterization of the SPT-3G First-year Focal Plane

Authors: W. Everett, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. E. Austermann, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, J. E. Carlstrom, F. W. Carter, T. Cecil, C. L. Chang, J. F. Cliche, A. Cukierman, E. V. Denison, T. de Haan, J. Ding, M. A. Dobbs, D. Dutcher, A. Foster, R. N. Gannon, A. Gilbert, J. C. Groh, N. W. Halverson , et al. (51 additional authors not shown)

Abstract: During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization… ▽ More During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization pixels, read out using 68x frequency-domain multiplexing. Here we discuss design, assembly, and layout of the modules, as well as early performance characterization of the first-year array, including yield and detector properties. △ Less

Submitted 25 February, 2019; originally announced February 2019.

Comments: Conference proceeding for Low Temperature Detectors 2017. Accepted for publication: 27 August 2018

Year two instrument status of the SPT-3G cosmic microwave background receiver

Authors: A. N. Bender, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. S. Avva, K. Aylor, P. S. Barry, R. Basu Thakur, B. A. Benson, L. S. Bleem, S. Bocquet, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, H. -M. Cho, J. F. Cliche, T. M. Crawford, A. Cukierman, T. de Haan, E. V. Denison, J. Ding, M. A. Dobbs, S. Dodelson , et al. (64 additional authors not shown)

Abstract: The South Pole Telescope (SPT) is a millimeter-wavelength telescope designed for high-precision measurements of the cosmic microwave background (CMB). The SPT measures both the temperature and polarization of the CMB with a large aperture, resulting in high resolution maps sensitive to signals across a wide range of angular scales on the sky. With these data, the SPT has the potential to make a br… ▽ More The South Pole Telescope (SPT) is a millimeter-wavelength telescope designed for high-precision measurements of the cosmic microwave background (CMB). The SPT measures both the temperature and polarization of the CMB with a large aperture, resulting in high resolution maps sensitive to signals across a wide range of angular scales on the sky. With these data, the SPT has the potential to make a broad range of cosmological measurements. These include constraining the effect of massive neutrinos on large-scale structure formation as well as cleaning galactic and cosmological foregrounds from CMB polarization data in future searches for inflationary gravitational waves. The SPT began observing in January 2017 with a new receiver (SPT-3G) containing $\sim$16,000 polarization-sensitive transition-edge sensor bolometers. Several key technology developments have enabled this large-format focal plane, including advances in detectors, readout electronics, and large millimeter-wavelength optics. We discuss the implementation of these technologies in the SPT-3G receiver as well as the challenges they presented. In late 2017 the implementations of all three of these technologies were modified to optimize total performance. Here, we present the current instrument status of the SPT-3G receiver. △ Less

Submitted 31 August, 2018; originally announced September 2018.

Comments: 21 pages, 9 Figures, Presented at SPIE Astronomical Telescopes + Instrumentation 2018

Journal ref: Proc. SPIE 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX, 1070803 (1 August 2018)

Characterization and performance of the second-year SPT-3G focal plane

Authors: D. Dutcher, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, J. F. Cliche, A. Cukierman, T. de Haan, J. Ding, M. A. Dobbs, W. Everett, A. Foster, J. Gallicchio, A. Gilbert, J. C. Groh, S. T. Guns, N. W. Halverson, A. H. Harke-Hosemann , et al. (46 additional authors not shown)

Abstract: The third-generation instrument for the 10-meter South Pole Telescope, SPT-3G, was first installed in January 2017. In addition to completely new cryostats, secondary telescope optics, and readout electronics, the number of detectors in the focal plane has increased by an order of magnitude from previous instruments to ~16,000. The SPT-3G focal plane consists of ten detector modules, each with an… ▽ More The third-generation instrument for the 10-meter South Pole Telescope, SPT-3G, was first installed in January 2017. In addition to completely new cryostats, secondary telescope optics, and readout electronics, the number of detectors in the focal plane has increased by an order of magnitude from previous instruments to ~16,000. The SPT-3G focal plane consists of ten detector modules, each with an array of 269 trichroic, polarization-sensitive pixels on a six-inch silicon wafer. Within each pixel is a broadband, dual-polarization sinuous antenna; the signal from each orthogonal linear polarization is divided into three frequency bands centered at 95, 150, and 220 GHz by in-line lumped element filters and transmitted via superconducting microstrip to Ti/Au transition-edge sensor (TES) bolometers. Properties of the TES film, microstrip filters, and bolometer island must be tightly controlled to achieve optimal performance. For the second year of SPT-3G operation, we have replaced all ten wafers in the focal plane with new detector arrays tuned to increase map** speed and improve overall performance. Here we discuss the TES superconducting transition temperature and normal resistance, detector saturation power, bandpasses, optical efficiency, and full array yield for the 2018 focal plane. △ Less

Submitted 31 August, 2018; originally announced September 2018.

Comments: 13 pages, 11 figures

Journal ref: Proc. SPIE Volume 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX; 107081Z (2018)

Design and characterization of the SPT-3G receiver

Authors: J. A. Sobrin, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, J. F. Cliche, A. Cukierman, T. de Haan, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, A. Foster, J. Gallichio, A. Gilbert, J. C. Groh, S. T. Guns, N. W. Halverson , et al. (46 additional authors not shown)

Abstract: The SPT-3G receiver was commissioned in early 2017 on the 10-meter South Pole Telescope (SPT) to map anisotropies in the cosmic microwave background (CMB). New optics, detector, and readout technologies have yielded a multichroic, high-resolution, low-noise camera with impressive throughput and sensitivity, offering the potential to improve our understanding of inflationary physics, astroparticle… ▽ More The SPT-3G receiver was commissioned in early 2017 on the 10-meter South Pole Telescope (SPT) to map anisotropies in the cosmic microwave background (CMB). New optics, detector, and readout technologies have yielded a multichroic, high-resolution, low-noise camera with impressive throughput and sensitivity, offering the potential to improve our understanding of inflationary physics, astroparticle physics, and growth of structure. We highlight several key features and design principles of the new receiver, and summarize its performance to date. △ Less

Submitted 31 August, 2018; originally announced September 2018.

Comments: Conference Presentation at SPIE Astronomical Telescopes + Instrumentation 2018, conference 10708

Journal ref: Proc. SPIE 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX, 107081H (24 August 2018)

Broadband anti-reflective coatings for cosmic microwave background experiments

Authors: A. Nadolski, A. M. Kofman, J. D. Vieira, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, J. F. Cliche, A. Cukierman, T. de Haan, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, A. Foster, J. Fu, J. Gallicchio, A. Gilbert , et al. (49 additional authors not shown)

Abstract: The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth comp… ▽ More The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth compared to waveguide-coupled detectors. However, the increase in bandwidth comes at a cost: the lenses (up to $\sim$700 mm diameter) and lenslets ($\sim$5 mm diameter, hemispherical lenses on the focal plane) used in these systems are made from high-refractive-index materials (such as silicon or amorphous aluminum oxide) that reflect nearly a third of the incident radiation. In order to maximize the faint CMB signal that reaches the detectors, the lenses and lenslets must be coated with an anti-reflective (AR) material. The AR coating must maximize radiation transmission in scientifically interesting bands and be cryogenically stable. Such a coating was developed for the third generation camera, SPT-3G, of the South Pole Telescope (SPT) experiment, but the materials and techniques used in the development are general to AR coatings for mm-wave optics. The three-layer polytetrafluoroethylene-based AR coating is broadband, inexpensive, and can be manufactured with simple tools. The coating is field tested; AR coated focal plane elements were deployed in the 2016-2017 austral summer and AR coated reimaging optics were deployed in 2017-2018. △ Less

Submitted 31 August, 2018; originally announced September 2018.

Comments: 13 pages, 5 figures

Journal ref: Proceedings of SPIE Volume 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX; 1070843 (2018)

Optical Characterization of the SPT-3G Focal Plane

Authors: Zhaodi Pan, Peter Ade, Zeeshan Ahmed, Anderson Adam, Jason Austermann, Jessica Avva, Ritoban Basu Thakur, Bender Amy, Bradford Benson, John Carlstrom, Faustin Carter, Thomas Cecil, Clarence Chang, Jean-Francois Cliche, Ariel Cukierman, Edward Denison, Tijmen de Haan, Junjia Ding, Matt Dobbs, Daniel Dutcher, Wendeline Everett, Allen Foster, Renae Gannon, Adam Gilbert, John Groh , et al. (51 additional authors not shown)

Abstract: The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lump… ▽ More The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lumped element filters. Ten detector wafers populate the focal plane, which is coupled to the sky via a large-aperture optical system. Here we present the frequency band characterization with Fourier transform spectroscopy, measurements of optical time constants, beam properties, and optical and polarization efficiencies of the focal plane. The detectors have frequency bands consistent with our simulations, and have high average optical efficiency which is 86%, 77% and 66% for the 95, 150 and 220 GHz detectors. The time constants of the detectors are mostly between 0.5 ms and 5 ms. The beam is round with the correct size, and the polarization efficiency is more than 90% for most of the bolometers △ Less

Submitted 8 May, 2018; originally announced May 2018.

Comments: Conference proceeding for Low Temperature Detectors 2017

Quantum Sensing for High Energy Physics

Authors: Zeeshan Ahmed, Yuri Alexeev, Giorgio Apollinari, Asimina Arvanitaki, David Awschalom, Karl K. Berggren, Karl Van Bibber, Przemyslaw Bienias, Geoffrey Bodwin, Malcolm Boshier, Daniel Bowring, Davide Braga, Karen Byrum, Gustavo Cancelo, Gianpaolo Carosi, Tom Cecil, Clarence Chang, Mattia Checchin, Sergei Chekanov, Aaron Chou, Aashish Clerk, Ian Cloet, Michael Crisler, Marcel Demarteau, Ranjan Dharmapalan , et al. (91 additional authors not shown)

Abstract: Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics. Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics. △ Less

Submitted 29 March, 2018; originally announced March 2018.

Comments: 38 pages, report of the first workshop on Quantum Sensing for High Energy Physics, held at Argonne National Laboratory, December 12-14, 2017

The Dark Energy Camera

Authors: B. Flaugher, H. T. Diehl, K. Honscheid, T. M. C. Abbott, O. Alvarez, R. Angstadt, J. T. Annis, M. Antonik, O. Ballester, L. Beaufore, G. M. Bernstein, R. A. Bernstein, B. Bigelow, M. Bonati, D. Boprie, D. Brooks, E. J. Buckley-Geer, J. Campa, L. Cardiel-Sas, F. J. Castander, J. Castilla, H. Cease, J. M. Cela-Ruiz, S. Chappa, E. Chi , et al. (93 additional authors not shown)

Abstract: The Dark Energy Camera is a new imager with a 2.2-degree diameter field of view mounted at the prime focus of the Victor M. Blanco 4-meter telescope on Cerro Tololo near La Serena, Chile. The camera was designed and constructed by the Dark Energy Survey Collaboration, and meets or exceeds the stringent requirements designed for the wide-field and supernova surveys for which the collaboration uses… ▽ More The Dark Energy Camera is a new imager with a 2.2-degree diameter field of view mounted at the prime focus of the Victor M. Blanco 4-meter telescope on Cerro Tololo near La Serena, Chile. The camera was designed and constructed by the Dark Energy Survey Collaboration, and meets or exceeds the stringent requirements designed for the wide-field and supernova surveys for which the collaboration uses it. The camera consists of a five element optical corrector, seven filters, a shutter with a 60 cm aperture, and a CCD focal plane of 250 micron thick fully-depleted CCDs cooled inside a vacuum Dewar. The 570 Mpixel focal plane comprises 62 2kx4k CCDs for imaging and 12 2kx2k CCDs for guiding and focus. The CCDs have 15 microns x15 microns pixels with a plate scale of 0.263 arc sec per pixel. A hexapod system provides state-of-the-art focus and alignment capability. The camera is read out in 20 seconds with 6-9 electrons readout noise. This paper provides a technical description of the camera's engineering, construction, installation, and current status. △ Less

Submitted 11 April, 2015; originally announced April 2015.

Comments: submitted to AJ Corresponding Authors H. T. Diehl ([email protected])

Report number: FERMILAB-PUB-15-121-PPD

SPT-3G: A Next-Generation Cosmic Microwave Background Polarization Experiment on the South Pole Telescope

Authors: B. A. Benson, P. A. R. Ade, Z. Ahmed, S. W. Allen, K. Arnold, J. E. Austermann, A. N. Bender, L. E. Bleem, J. E. Carlstrom, C. L. Chang, H. M. Cho, S. T. Ciocys, J. F. Cliche, T. M. Crawford, A. Cukierman, T. de Haan, M. A. Dobbs, D. Dutcher, W. Everett, A. Gilbert, N. W. Halverson, D. Hanson, N. L. Harrington, K. Hattori, J. W. Henning , et al. (39 additional authors not shown)

Abstract: We describe the design of a new polarization sensitive receiver, SPT-3G, for the 10-meter South Pole Telescope (SPT). The SPT-3G receiver will deliver a factor of ~20 improvement in map** speed over the current receiver, SPTpol. The sensitivity of the SPT-3G receiver will enable the advance from statistical detection of B-mode polarization anisotropy power to high signal-to-noise measurements of… ▽ More We describe the design of a new polarization sensitive receiver, SPT-3G, for the 10-meter South Pole Telescope (SPT). The SPT-3G receiver will deliver a factor of ~20 improvement in map** speed over the current receiver, SPTpol. The sensitivity of the SPT-3G receiver will enable the advance from statistical detection of B-mode polarization anisotropy power to high signal-to-noise measurements of the individual modes, i.e., maps. This will lead to precise (~0.06 eV) constraints on the sum of neutrino masses with the potential to directly address the neutrino mass hierarchy. It will allow a separation of the lensing and inflationary B-mode power spectra, improving constraints on the amplitude and shape of the primordial signal, either through SPT-3G data alone or in combination with BICEP-2/KECK, which is observing the same area of sky. The measurement of small-scale temperature anisotropy will provide new constraints on the epoch of reionization. Additional science from the SPT-3G survey will be significantly enhanced by the synergy with the ongoing optical Dark Energy Survey (DES), including: a 1% constraint on the bias of optical tracers of large-scale structure, a measurement of the differential Doppler signal from pairs of galaxy clusters that will test General Relativity on ~200 Mpc scales, and improved cosmological constraints from the abundance of clusters of galaxies. △ Less

Submitted 10 July, 2014; originally announced July 2014.

Comments: 21 pages, 9 figures. To be published in Proceedings of SPIE Volume 9153. Presented at SPIE Astronomical Telescopes + Instrumentation 2014, conference 9153

The Sloan Bright Arcs Survey: Ten Strong Gravitational Lensing Clusters and Evidence of Overconcentration

Authors: Matthew P. Wiesner, Huan Lin, Sahar S. Allam, James Annis, Elizabeth J. Buckley-Geer, H. Thomas Diehl, Donna Kubik, Jeffrey M. Kubo, Douglas Tucker

Abstract: We describe ten strong lensing galaxy clusters of redshift 0.26-0.56 that were found in the Sloan Digital Sky Survey. We present measurements of richness, mass and velocity dispersion for the clusters. We find that in order to use the mass-richness relation from Johnston et al. (2007), which was established at mean redshift of 0.25, it is necessary to scale measured richness values up by 1.47. We… ▽ More We describe ten strong lensing galaxy clusters of redshift 0.26-0.56 that were found in the Sloan Digital Sky Survey. We present measurements of richness, mass and velocity dispersion for the clusters. We find that in order to use the mass-richness relation from Johnston et al. (2007), which was established at mean redshift of 0.25, it is necessary to scale measured richness values up by 1.47. We also present measurements of Einstein radius, mass and velocity dispersion for the lensing systems. The Einstein radii are all relatively small, between 5.4-13 arcseconds. Finally we consider if there is evidence that our clusters are more concentrated than standard cosmology would predict. We find that six of our clusters do not show evidence of overconcentration, while four of our clusters do. We note a correlation between overconcentration and mass, as the four clusters showing evidence of overconcentration are all lower-mass clusters. △ Less

Submitted 6 November, 2012; originally announced November 2012.

Comments: 38 pages, 14 figures. To be published in The Astrophysical Journal

Report number: FERMILAB-PUB-12-569-AE

Journal ref: 2012, ApJ, 761, 1

Second Season QUIET Observations: Measurements of the CMB Polarization Power Spectrum at 95 GHz

Authors: QUIET Collaboration, D. Araujo, C. Bischoff, A. Brizius, I. Buder, Y. Chinone, K. Cleary, R. N. Dumoulin, A. Kusaka, R. Monsalve, S. K. Næss, L. B. Newburgh, R. Reeves, I. K. Wehus, J. T. L. Zwart, L. Bronfman, R. Bustos, S. E. Church, C. Dickinson, H. K. Eriksen, T. Gaier, J. O. Gundersen, M. Hasegawa, M. Hazumi, K. M. Huffenberger , et al. (26 additional authors not shown)

Abstract: The Q/U Imaging ExperimenT (QUIET) has observed the cosmic microwave background (CMB) at 43 and 95GHz. The 43-GHz results have been published in QUIET Collaboration et al. (2011), and here we report the measurement of CMB polarization power spectra using the 95-GHz data. This data set comprises 5337 hours of observations recorded by an array of 84 polarized coherent receivers with a total array se… ▽ More The Q/U Imaging ExperimenT (QUIET) has observed the cosmic microwave background (CMB) at 43 and 95GHz. The 43-GHz results have been published in QUIET Collaboration et al. (2011), and here we report the measurement of CMB polarization power spectra using the 95-GHz data. This data set comprises 5337 hours of observations recorded by an array of 84 polarized coherent receivers with a total array sensitivity of 87 uK sqrt(s). Four low-foreground fields were observed, covering a total of ~1000 square degrees with an effective angular resolution of 12.8', allowing for constraints on primordial gravitational waves and high-signal-to-noise measurements of the E-modes across three acoustic peaks. The data reduction was performed using two independent analysis pipelines, one based on a pseudo-Cl (PCL) cross-correlation approach, and the other on a maximum-likelihood (ML) approach. All data selection criteria and filters were modified until a predefined set of null tests had been satisfied before inspecting any non-null power spectrum. The results derived by the two pipelines are in good agreement. We characterize the EE, EB and BB power spectra between l=25 and 975 and find that the EE spectrum is consistent with LCDM, while the BB power spectrum is consistent with zero. Based on these measurements, we constrain the tensor-to-scalar ratio to r=1.1+0.9-0.8 (r<2.8 at 95% C.L.) as derived by the ML pipeline, and r=1.2+0.9-0.8 (r<2.7 at 95% C.L.) as derived by the PCL pipeline. In one of the fields, we find a correlation with the dust component of the Planck Sky Model, though the corresponding excess power is small compared to statistical errors. Finally, we derive limits on all known systematic errors, and demonstrate that these correspond to a tensor-to-scalar ratio smaller than r=0.01, the lowest level yet reported in the literature. △ Less

Submitted 30 January, 2013; v1 submitted 20 July, 2012; originally announced July 2012.

Comments: 10 pages, 6 figures, 3 tables, submitted to ApJ, This paper should be cited as "QUIET Collaboration (2012)." v2: updated to reflect published version

Journal ref: ApJ 760, 145 (2012)

Measuring the flatness of focal plane for very large mosaic CCD camera

Authors: Jiangang Hao, Juan Estrada, Herman Cease, H. Thomas Diehl, Brenna L. Flaugher, Donna Kubik, Keivin Kuk, Nickolai Kuropatkine, Huan Lin, Jorge Montes, Vic Scarpine, Ken Schultz, William Wester

Abstract: Large mosaic multiCCD camera is the key instrument for modern digital sky survey. DECam is an extremely red sensitive 520 Megapixel camera designed for the incoming Dark Energy Survey (DES). It is consist of sixty two 4k$\times$2k and twelve 2k x 2k 250-micron thick fully-depleted CCDs, with a focal plane of 44 cm in diameter and a field of view of 2.2 square degree. It will be attached to the Bla… ▽ More Large mosaic multiCCD camera is the key instrument for modern digital sky survey. DECam is an extremely red sensitive 520 Megapixel camera designed for the incoming Dark Energy Survey (DES). It is consist of sixty two 4k$\times$2k and twelve 2k x 2k 250-micron thick fully-depleted CCDs, with a focal plane of 44 cm in diameter and a field of view of 2.2 square degree. It will be attached to the Blanco 4-meter telescope at CTIO. The DES will cover 5000 square-degrees of the southern galactic cap in 5 color bands (g, r, i, z, Y) in 5 years starting from 2011. To achieve the science goal of constraining the Dark Energy evolution, stringent requirements are laid down for the design of DECam. Among them, the flatness of the focal plane needs to be controlled within a 60-micron envelope in order to achieve the specified PSF variation limit. It is very challenging to measure the flatness of the focal plane to such precision when it is placed in a high vacuum dewar at 173 K. We developed two image based techniques to measure the flatness of the focal plane. By imaging a regular grid of dots on the focal plane, the CCD offset along the optical axis is converted to the variation the grid spacings at different positions on the focal plane. After extracting the patterns and comparing the change in spacings, we can measure the flatness to high precision. In method 1, the regular dots are kept in high sub micron precision and cover the whole focal plane. In method 2, no high precision for the grid is required. Instead, we use a precise XY stage moves the pattern across the whole focal plane and comparing the variations of the spacing when it is imaged by different CCDs. Simulation and real measurements show that the two methods work very well for our purpose, and are in good agreement with the direct optical measurements. △ Less

Submitted 28 October, 2010; originally announced October 2010.

Comments: Presented at SPIE Conference,Ground-based and Airborne Instrumentation for Astronomy III, San Diego, 2010

Report number: FERMILAB-CONF-10-191-A

Journal ref: Proc.SPIE Int.Soc.Opt.Eng.7735:77353U,2010

The Sloan Bright Arcs Survey : Discovery of Seven New Strongly Lensed Galaxies from z=0.66-2.94

Authors: Jeffrey M. Kubo, Sahar S. Allam, Emily Drabek, Huan Lin, Douglas Tucker, Elizabeth J. Buckley-Geer, H. Thomas Diehl, Marcelle Soares-Santos, Jiangang Hao, Matthew Wiesner, Anderson West, Donna Kubik, James Annis, Joshua A. Frieman

Abstract: We report the discovery of seven new, very bright gravitational lens systems from our ongoing gravitational lens search, the Sloan Bright Arcs Survey (SBAS). Two of the systems are confirmed to have high source redshifts z=2.19 and z=2.94. Three other systems lie at intermediate redshift with z=1.33,1.82,1.93 and two systems are at low redshift z=0.66,0.86. The lensed source galaxies in all of the… ▽ More We report the discovery of seven new, very bright gravitational lens systems from our ongoing gravitational lens search, the Sloan Bright Arcs Survey (SBAS). Two of the systems are confirmed to have high source redshifts z=2.19 and z=2.94. Three other systems lie at intermediate redshift with z=1.33,1.82,1.93 and two systems are at low redshift z=0.66,0.86. The lensed source galaxies in all of these systems are bright, with i-band magnitudes ranging from 19.73-22.06. We present the spectrum of each of the source galaxies in these systems along with estimates of the Einstein radius for each system. The foreground lens in most systems is identified by a red sequence based cluster finder as a galaxy group; one system is identified as a moderately rich cluster. In total the SBAS has now discovered 19 strong lens systems in the SDSS imaging data, 8 of which are among the highest surface brightness z\simeq2-3 galaxies known. △ Less

Submitted 4 November, 2010; v1 submitted 14 October, 2010; originally announced October 2010.

Comments: 14 pages, 4 figures, 1 table; ApJL, matches accepted version

Report number: FERMILAB-PUB-10-416-AE

Journal ref: Astrophys.J.724:L137-L142,2010

The Sloan Bright Arcs Survey: Four Strongly Lensed Galaxies with Redshift >2

Authors: H. Thomas Diehl, Sahar S. Allam, James Annis, Elizabeth J. Buckley-Geer, Joshua A. Frieman, Donna Kubik, Jeffrey M. Kubo, Huan Lin, Douglas Tucker, Anderson West

Abstract: We report the discovery of four very bright, strongly-lensed galaxies found via systematic searches for arcs in Sloan Digital Sky Survey Data Release 5 and 6. These were followed-up with spectroscopy and imaging data from the Astrophysical Research Consortium 3.5m telescope at Apache Point Observatory and found to have redshift $z>2.0$. With isophotal magnitudes $r = 19.2 - 20.4$ and $3\arcsec$-… ▽ More We report the discovery of four very bright, strongly-lensed galaxies found via systematic searches for arcs in Sloan Digital Sky Survey Data Release 5 and 6. These were followed-up with spectroscopy and imaging data from the Astrophysical Research Consortium 3.5m telescope at Apache Point Observatory and found to have redshift $z>2.0$. With isophotal magnitudes $r = 19.2 - 20.4$ and $3\arcsec$-diameter magnitudes $r = 20.0 - 20.6$, these systems are some of the brightest and highest surface brightness lensed galaxies known in this redshift range. In addition to the magnitudes and redshifts, we present estimates of the Einstein radii, which range from $5.0 \arcsec$ to $12.7 \arcsec$, and use those to derive the enclosed masses of the lensing galaxies. △ Less

Submitted 23 October, 2009; originally announced October 2009.

Report number: FERMILAB-PUB-09-532-A-PPD

Journal ref: Astrophys.J.707:686-692,2009

The Sloan Nearby Cluster Weak Lensing Survey

Authors: Jeffrey M. Kubo, James Annis, Frances Mei Hardin, Donna Kubik, Kelsey Lawhorn, Huan Lin, Liana Nicklaus, Dylan Nelson, Ribamar R. R. Reis, Hee-Jong Seo, Marcelle Soares-Santos, Albert Stebbins, Tony Yunker

Abstract: We describe and present initial results of a weak lensing survey of nearby ($\rm{z}\lesssim0.1$) galaxy clusters in the Sloan Digital Sky Survey (SDSS). In this first study, galaxy clusters are selected from the SDSS spectroscopic galaxy cluster catalogs of \citet{miller05} and \citet{berlind06}. We report a total of seven individual low redshift cluster weak lensing measurements which include:… ▽ More We describe and present initial results of a weak lensing survey of nearby ($\rm{z}\lesssim0.1$) galaxy clusters in the Sloan Digital Sky Survey (SDSS). In this first study, galaxy clusters are selected from the SDSS spectroscopic galaxy cluster catalogs of \citet{miller05} and \citet{berlind06}. We report a total of seven individual low redshift cluster weak lensing measurements which include: A2048, A1767, A2244, A1066, A2199, and two clusters specifically identified with the C4 algorithm. Our program of weak lensing of nearby galaxy clusters in the SDSS will eventually reach $\sim 200$ clusters, making it the largest weak lensing survey of individual galaxy clusters to date. △ Less

Submitted 11 August, 2009; originally announced August 2009.

Comments: accepted to ApJL; 11 pages, 1 figure

Report number: FERMILAB-PUB-09-391-A

Journal ref: Astrophys.J.702:L110-L113,2009

The Sloan Bright Arcs Survey : Six Strongly Lensed Galaxies at z=0.4-1.4

Authors: Jeffrey M. Kubo, Sahar S. Allam, James Annis, Elizabeth J. Buckley-Geer, H. Thomas Diehl, Donna Kubik, Huan Lin, Douglas Tucker

Abstract: We present new results of our program to systematically search for strongly lensed galaxies in the Sloan Digital Sky Survey (SDSS) imaging data. In this study six strong lens systems are presented which we have confirmed with follow-up spectroscopy and imaging using the 3.5m telescope at the Apache Point Observatory. Preliminary mass models indicate that the lenses are group-scale systems with v… ▽ More We present new results of our program to systematically search for strongly lensed galaxies in the Sloan Digital Sky Survey (SDSS) imaging data. In this study six strong lens systems are presented which we have confirmed with follow-up spectroscopy and imaging using the 3.5m telescope at the Apache Point Observatory. Preliminary mass models indicate that the lenses are group-scale systems with velocity dispersions ranging from 466-878 km s^{-1} at z=0.17-0.45 which are strongly lensing source galaxies at z=0.4-1.4. Galaxy groups are a relatively new mass scale just beginning to be probed with strong lensing. Our sample of lenses roughly doubles the confirmed number of group-scale lenses in the SDSS and complements ongoing strong lens searches in other imaging surveys such as the CFHTLS (Cabanac et al 2007). As our arcs were discovered in the SDSS imaging data they are all bright ($r\lesssim22$), making them ideally suited for detailed follow-up studies. △ Less

Submitted 19 December, 2008; originally announced December 2008.

Comments: 13 pages, 3 figures, submitted to ApJL, the Sloan Bright Arcs page is located here: http://home.fnal.gov/~kubo/brightarcs.html

Journal ref: Astrophys.J.696:L61-L65,2009

Discovery of A Very Bright, Strongly-Lensed z=2 Galaxy in the SDSS DR5

Authors: Huan Lin, Elizabeth Buckley-Geer, Sahar S. Allam, Douglas L. Tucker, H. Thomas Diehl, Donna Kubik, Jeffrey M. Kubo, James Annis, Joshua A. Frieman, Masamune Oguri, Naohisa Inada

Abstract: We report on the discovery of a very bright z = 2.00 star-forming galaxy that is strongly lensed by a foreground z=0.422 luminous red galaxy (LRG). This system was found in a systematic search for bright arcs lensed by LRGs and brightest cluster galaxies in the Sloan Digital Sky Survey Data Release 5 sample. Follow-up observations on the Subaru 8.2m telescope on Mauna Kea and the Astrophysical R… ▽ More We report on the discovery of a very bright z = 2.00 star-forming galaxy that is strongly lensed by a foreground z=0.422 luminous red galaxy (LRG). This system was found in a systematic search for bright arcs lensed by LRGs and brightest cluster galaxies in the Sloan Digital Sky Survey Data Release 5 sample. Follow-up observations on the Subaru 8.2m telescope on Mauna Kea and the Astrophysical Research Consortium 3.5m telescope at Apache Point Observatory confirmed the lensing nature of this system. A simple lens model for the system, assuming a singular isothermal ellipsoid mass distribution, yields an Einstein radius of 3.82 +/- 0.03 arcsec or 14.8 +/- 0.1 kpc/h at the lens redshift. The total projected mass enclosed within the Einstein radius is 2.10 +/- 0.03 x 10^12 M_sun/h, and the magnification factor for the source galaxy is 27 +/- 1. Combining the lens model with our gVriz photometry, we find an (unlensed) star formation rate for the source galaxy of 32 M_sun/h / yr, adopting a fiducial constant star formation rate model with an age of 100 Myr and E(B-V) = 0.25. With an apparent magnitude of r = 19.9, this system is among the very brightest lensed z >= 2 galaxies, and provides an excellent opportunity to pursue detailed studies of the physical properties of an individual high-redshift star-forming galaxy. △ Less

Submitted 25 September, 2008; originally announced September 2008.

Comments: 31 pages, 12 figures, 4 tables, submitted to ApJ

Report number: FERMILAB-PUB-08-411-CD

Journal ref: Astrophys.J.699:1242-1251,2009

Prospects for a direct dark matter search using high resistivity CCD detectors

Authors: J. Estrada, H. Cease, H. T. Diehl, B. Flaugher, J. Jones, D. Kubik, A. Sonnenschein

Abstract: The possibility of using CCD detectors in a low threshold direct detection dark matter search experiment is discussed. We present the main features of the DECam detectors that make them a good alternative for such an experiment, namely their low noise and their large depleted volume. The performance of the DECam CCDs for the detection of nuclear recoils is discussed, and a measurement of the ion… ▽ More The possibility of using CCD detectors in a low threshold direct detection dark matter search experiment is discussed. We present the main features of the DECam detectors that make them a good alternative for such an experiment, namely their low noise and their large depleted volume. The performance of the DECam CCDs for the detection of nuclear recoils is discussed, and a measurement of the ionization efficiency for these events is presented. Finally the plans and expected reach for the CCD Experiment at Low Background (CELB) are discussed. △ Less

Submitted 1 July, 2008; v1 submitted 20 February, 2008; originally announced February 2008.

LCDG4 and DigiSim - Simulation activities at NICADD/NIU

Authors: D. Beznosko, G. Blazey, D. Chakraborty, A. Dyshkant, K. Francis, D. Kubik, J. G. R. Lima, J. McCormick, R. McIntosh, V. Rykalin, V. Zutshi

Abstract: We present two software packages developed to support detector R&D studies for the International Linear Collider. LCDG4 is a full-detector simulator that provides energy deposits from particles traversing the sensitive volumes of the detector. It has been extensively used within the American ILC community, providing data for algorithm development and detector optimization studies. DigiSim models… ▽ More We present two software packages developed to support detector R&D studies for the International Linear Collider. LCDG4 is a full-detector simulator that provides energy deposits from particles traversing the sensitive volumes of the detector. It has been extensively used within the American ILC community, providing data for algorithm development and detector optimization studies. DigiSim models real-life digitization effects, converting the idealized response into simulated detector readout. It has many useful features to improve the realism in modeling detector response. The main characteristics of these two complementary packages are discussed. △ Less

Submitted 28 July, 2005; originally announced July 2005.

Comments: 8 pages, 7 figures, submitted to LCWS05 conference proceedings. Uses slac_one.rtx

Report number: FERMILAB-CONF-05-342-E

Development of Photogrammetric Methods of Stress Analysis and Quality Control

Authors: Donna L. Kubik, John A. Greenwood

Abstract: A photogrammetric method of stress analysis has been developed to test thin, nonstandard windows designed for hydrogen absorbers, major components of a muon cooling channel. The purpose of the absorber window tests is to demonstrate an understanding of the window behavior and strength as a function of applied pressure. This is done by comparing the deformation of the window, measured via photogr… ▽ More A photogrammetric method of stress analysis has been developed to test thin, nonstandard windows designed for hydrogen absorbers, major components of a muon cooling channel. The purpose of the absorber window tests is to demonstrate an understanding of the window behavior and strength as a function of applied pressure. This is done by comparing the deformation of the window, measured via photogrammetry, to the deformation predicted by finite element analysis (FEA). FEA analyses indicate a strong sensitivity of strain to the window thickness. Photogrammetric methods were chosen to measure the thickness of the window, thus providing data that are more accurate to the FEA. This, plus improvements made in hardware and testing procedures, resulted in a precision of 5 microns in all dimensions and substantial agreement with FEA predictions. △ Less

Submitted 3 November, 2003; originally announced November 2003.

Comments: 25 pages, to appear in the journal, Technical Sciences, published by the University of Warmia and Mazury in Olsztyn, Poland

Journal ref: ECONFC0211115:061,2002

Progress in Absorber R&D 2: Windows

Authors: D. M. Kaplan, E. L. Black, K. W. Cassel, S. Geer, M. Popovic, S. Ishimoto, K. Yoshimura, L. Bandura, M. A. Cummings, A. Dyshkant, D. Kubik, D. Hedin, C. Darve, Y. Kuno, D. Errede, M. Haney, S. Majewski, M. Reep, D. Summers

Abstract: A program is underway to develop liquid-hydrogen energy absorbers for ionization cooling of muon-beam transverse emittance. Minimization of multiple-scattering-induced beam heating requires thin windows. The first window prototype has been destructively tested, validating the finite-element-analysis model and the design approach. A program is underway to develop liquid-hydrogen energy absorbers for ionization cooling of muon-beam transverse emittance. Minimization of multiple-scattering-induced beam heating requires thin windows. The first window prototype has been destructively tested, validating the finite-element-analysis model and the design approach. △ Less

Submitted 17 August, 2001; originally announced August 2001.

Comments: 3 pages, 3 figures, presented at the 2001 Particle Accelerator Conference (PAC 2001), June 18-22, 2001, Chicago, Illinois

Report number: IIT-HEP-01/3

Journal ref: Conf.Proc.C0106181:3888-3890,2001

Progress in Absorber R&D for Muon Cooling

Authors: D. M. Kaplan, E. L. Black, M. Boghosian, K. W. Cassel, R. P. Johnson, S. Geer, C. J. Johnstone, M. Popovic, S. Ishimoto, K. Yoshimura, L. Bandura, M. A. Cummings, A. Dyshkant, D. Hedin, D. Kubik, C. Darve, Y. Kuno, D. Errede, M. Haney, S. Majewski, M. Reep, D. Summers

Abstract: A stored-muon-beam neutrino factory may require transverse ionization cooling of the muon beam. We describe recent progress in research and development on energy absorbers for muon-beam cooling carried out by a collaboration of university and laboratory groups. A stored-muon-beam neutrino factory may require transverse ionization cooling of the muon beam. We describe recent progress in research and development on energy absorbers for muon-beam cooling carried out by a collaboration of university and laboratory groups. △ Less

Submitted 17 August, 2001; v1 submitted 15 August, 2001; originally announced August 2001.

Comments: 7 pages, 1 figure, presented at the 3rd International Workshop on Neutrino Factory Based on Muon Storage Rings (NuFACT'01), May 24-30, 2001, Tsukuba, Japan

Report number: IIT-HEP-01/2

Journal ref: Nucl.Instrum.Meth.A503:392-395,2003