-
Detachment scalings derived from 1D scrape-off-layer simulations
Authors:
Thomas Body,
Thomas Eich,
Adam Q Kuang,
Thomas Looby,
Mike Kryjak,
Benjamin D Dudson,
Matthew Reinke
Abstract:
Fusion power plants will require active detachment control to mitigate sputtering. Although detachment control has been demonstrated on current fusion experiments, achieving this on fusion power plants will be more challenging due to their reduced diagnostic set. Real-time scrape-off-layer (SOL) modeling will help to fill this "diagnostic gap". To determine the minimal set of physics required for…
▽ More
Fusion power plants will require active detachment control to mitigate sputtering. Although detachment control has been demonstrated on current fusion experiments, achieving this on fusion power plants will be more challenging due to their reduced diagnostic set. Real-time scrape-off-layer (SOL) modeling will help to fill this "diagnostic gap". To determine the minimal set of physics required for accurate SOL modeling, we use the configurable Hermes-3 edge modeling framework to perform simple, fixed-fraction-impurity 1D Braginskii simulations. We show that these simulations reproduce distinctive attached and detached conditions, as well as the characteristic ion-flux rollover. We also perform scans of the input heat flux and impurity concentration, and show that the results predict similar trends to the lower-fidelity Lengyel model. This allows us to also indirectly compare to SOLPS simulations, and we find that the Lengyel model has similar "over-estimation" factors to Hermes-1D and SOLPS. This indirect comparison highlights a series of extensions to bring our Hermes-1D results closer to the higher-fidelity 2D modeling, with the goal of develo** time-dependent detachment control suitable for next-generation fusion devices.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Kinetic-Ballooning-Bifurcation in Tokamak Pedestals Across Sha** and Aspect-Ratio
Authors:
J. F. Parisi,
A. O. Nelson,
R. Gaur,
S. M. Kaye,
F. I. Parra,
J. W. Berkery,
K. Barada,
C. Clauser,
A. J. Creely,
A. Diallo,
W. Guttenfelder,
J. W. Hughes,
L. A. Kogan,
A. Kleiner,
A. Q. Kuang,
M. Lampert,
T. Macwan,
J. E. Menard,
M. A. Miller
Abstract:
We use a new gyrokinetic threshold model to predict a bifurcation in tokamak pedestal width-height scalings that depends strongly on plasma sha** and aspect-ratio. The bifurcation arises from the first and second stability properties of kinetic-ballooning-modes that yields wide and narrow pedestal branches, expanding the space of accessible pedestal widths and heights. The wide branch offers pot…
▽ More
We use a new gyrokinetic threshold model to predict a bifurcation in tokamak pedestal width-height scalings that depends strongly on plasma sha** and aspect-ratio. The bifurcation arises from the first and second stability properties of kinetic-ballooning-modes that yields wide and narrow pedestal branches, expanding the space of accessible pedestal widths and heights. The wide branch offers potential for edge-localized-mode-free pedestals with high core pressure. For negative triangularity, low-aspect-ratio configurations are predicted to give steeper pedestals than conventional-aspect-ratio. Both wide and narrow branches have been attained in tokamak experiments.
△ Less
Submitted 7 April, 2024; v1 submitted 8 December, 2023;
originally announced December 2023.
-
Strongly intermittent far scrape-off layer fluctuations in Alcator C-Mod plasmas close to the empirical discharge density limit
Authors:
Sajidah Ahmed,
Odd Erik Garcia,
Adam Q Kuang,
Brian LaBombard,
James L Terry,
Audun Theodorsen
Abstract:
Intermittent plasma fluctuations in the boundary region of the Alcator C-Mod device were comprehensively investigated using data time-series from gas puff imaging and mirror Langmuir probe diagnostics. Fluctuations were sampled during stationary plasma conditions in ohmically heated, lower single null diverted configurations with scans in both line-averaged density and plasma current, with Greenwa…
▽ More
Intermittent plasma fluctuations in the boundary region of the Alcator C-Mod device were comprehensively investigated using data time-series from gas puff imaging and mirror Langmuir probe diagnostics. Fluctuations were sampled during stationary plasma conditions in ohmically heated, lower single null diverted configurations with scans in both line-averaged density and plasma current, with Greenwald density fractions up to 0.85. Utilizing a stochastic model, we describe the plasma fluctuations as a super-position of uncorrelated pulses, with large-amplitude events corresponding to blob-like filaments moving through the scrape-off layer. A deconvolution method is used to estimate the pulse arrival times and amplitudes. The analysis reveals a significant increase of pulse amplitudes and waiting times as the line-averaged density approaches the empirical discharge density limit. Broadened and flattened average radial profiles are thus accompanied by strongly intermittent and large-amplitude fluctuations. Although these filaments are arriving less frequently at high line-averaged densities, we show that there are significant increases in radial far-SOL particle and heat fluxes which will further enhance plasma--wall interactions. The stochastic model has been used as a framework for study of the scalings in the intermittency parameter, flux and mean amplitude and waiting times, and is being used to inform predictive capability for the effects of filamentary transport as a function of Greenwald fraction.
△ Less
Submitted 8 August, 2023; v1 submitted 13 April, 2023;
originally announced April 2023.
-
Deep modelling of plasma and neutral fluctuations from gas puff turbulence imaging
Authors:
A. Mathews,
J. L. Terry,
S. G. Baek,
J. W. Hughes,
A. Q. Kuang,
B. LaBombard,
M. A. Miller,
D. Stotler,
D. Reiter,
W. Zholobenko,
M. Goto
Abstract:
The role of turbulence in setting boundary plasma conditions is presently a key uncertainty in projecting to fusion energy reactors. To robustly diagnose edge turbulence, we develop and demonstrate a technique to translate brightness measurements of HeI line radiation into local plasma fluctuations via a novel integrated deep learning framework that combines neutral transport physics and collision…
▽ More
The role of turbulence in setting boundary plasma conditions is presently a key uncertainty in projecting to fusion energy reactors. To robustly diagnose edge turbulence, we develop and demonstrate a technique to translate brightness measurements of HeI line radiation into local plasma fluctuations via a novel integrated deep learning framework that combines neutral transport physics and collisional radiative theory for the $3^3 D - 2^3 P$ transition in atomic helium. The tenets for experimental validity are reviewed, illustrating that this turbulence analysis for ionized gases is transferable to both magnetized and unmagnetized environments with arbitrary geometries. Based upon fast camera data on the Alcator C-Mod tokamak, we present the first 2-dimensional time-dependent experimental measurements of the turbulent electron density, electron temperature, and neutral density revealing shadowing effects in a fusion plasma using a single spectral line.
△ Less
Submitted 19 May, 2022; v1 submitted 24 January, 2022;
originally announced January 2022.
-
Neutron diagnostics for the physics of a high-field, compact, $Q\geq1$ tokamak
Authors:
R. A. Tinguely,
A. Rosenthal,
R. Simpson,
S. B. Ballinger,
A. J. Creely,
S. Frank,
A. Q. Kuang,
B. L. Linehan,
W. McCarthy,
L. M. Milanese,
K. J. Montes,
T. Mouratidis,
J. F. Picard,
P. Rodriguez-Fernandez,
A. J. Sandberg,
F. Sciortino,
E. A. Tolman,
M. Zhou,
B. N. Sorbom,
Z. S. Hartwig,
A. E. White
Abstract:
Advancements in high temperature superconducting technology have opened a path toward high-field, compact fusion devices. This new parameter space introduces both opportunities and challenges for diagnosis of the plasma. This paper presents a physics review of a neutron diagnostic suite for a SPARC-like tokamak [Greenwald et al 2018 doi:10.7910/DVN/OYYBNU]. A notional neutronics model was construc…
▽ More
Advancements in high temperature superconducting technology have opened a path toward high-field, compact fusion devices. This new parameter space introduces both opportunities and challenges for diagnosis of the plasma. This paper presents a physics review of a neutron diagnostic suite for a SPARC-like tokamak [Greenwald et al 2018 doi:10.7910/DVN/OYYBNU]. A notional neutronics model was constructed using plasma parameters from a conceptual device, called the MQ1 (Mission $Q \geq 1$) tokamak. The suite includes time-resolved micro-fission chamber (MFC) neutron flux monitors, energy-resolved radial and tangential magnetic proton recoil (MPR) neutron spectrometers, and a neutron camera system (radial and off-vertical) for spatially-resolved measurements of neutron emissivity. Geometries of the tokamak, neutron source, and diagnostics were modeled in the Monte Carlo N-Particle transport code MCNP6 to simulate expected signal and background levels of particle fluxes and energy spectra. From these, measurements of fusion power, neutron flux and fluence are feasible by the MFCs, and the number of independent measurements required for 95% confidence of a fusion gain $Q \geq 1$ is assessed. The MPR spectrometer is found to consistently overpredict the ion temperature and also have a 1000$\times$ improved detection of alpha knock-on neutrons compared to previous experiments. The deuterium-tritium fuel density ratio, however, is measurable in this setup only for trace levels of tritium, with an upper limit of $n_T/n_D \approx 6\%$, motivating further diagnostic exploration. Finally, modeling suggests that in order to adequately measure the self-heating profile, the neutron camera system will require energy and pulse-shape discrimination to suppress otherwise overwhelming fluxes of low energy neutrons and gamma radiation.
*Co-first-authorship
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
High-resolution disruption halo current measurements using Langmuir probes in Alcator C-Mod
Authors:
RA Tinguely,
RS Granetz,
A Berg,
AQ Kuang,
D Brunner,
B LaBombard
Abstract:
Halo currents generated during disruptions on Alcator C-Mod have been measured with Langmuir "rail" probes. These rail probes are embedded in a lower outboard divertor module in a closely-spaced vertical (poloidal) array. The dense array provides detailed resolution of the spatial dependence (~1 cm spacing) of the halo current distribution in the plasma scrape-off region with high time resolution…
▽ More
Halo currents generated during disruptions on Alcator C-Mod have been measured with Langmuir "rail" probes. These rail probes are embedded in a lower outboard divertor module in a closely-spaced vertical (poloidal) array. The dense array provides detailed resolution of the spatial dependence (~1 cm spacing) of the halo current distribution in the plasma scrape-off region with high time resolution (400 kHz digitization rate). As the plasma limits on the outboard divertor plate, the contact point is clearly discernible in the halo current data (as an inversion of current) and moves vertically down the divertor plate on many disruptions. These data are consistent with filament reconstructions of the plasma boundary, from which the edge safety factor of the disrupting plasma can be calculated. Additionally, the halo current "footprint" on the divertor plate is obtained and related to the halo flux width. The voltage driving halo current and the effective resistance of the plasma region through which the halo current flows to reach the probes are also investigated. Estimations of the sheath resistance and halo region resistivity and temperature are given. This information could prove useful for modeling halo current dynamics.
△ Less
Submitted 7 October, 2018;
originally announced October 2018.
-
Conceptual design study for heat exhaust management in the ARC fusion pilot plant
Authors:
A. Q. Kuang,
N. M. Cao,
A. J. Creely,
C. A. Dennett,
J. Hecla,
B. LaBombard,
R. A. Tinguely,
E. A. Tolman,
H. Hoffman,
M. Major,
J. Ruiz Ruiz,
D. Brunner,
P. Grover,
C. Laughman,
B. N. Sorbom,
D. G. Whyte
Abstract:
The ARC pilot plant conceptual design study has been extended beyond its initial scope [B. N. Sorbom et al., FED 100 (2015) 378] to explore options for managing ~525 MW of fusion power generated in a compact, high field (B_0 = 9.2 T) tokamak that is approximately the size of JET (R_0 = 3.3 m). Taking advantage of ARC's novel design - demountable high temperature superconductor toroidal field (TF)…
▽ More
The ARC pilot plant conceptual design study has been extended beyond its initial scope [B. N. Sorbom et al., FED 100 (2015) 378] to explore options for managing ~525 MW of fusion power generated in a compact, high field (B_0 = 9.2 T) tokamak that is approximately the size of JET (R_0 = 3.3 m). Taking advantage of ARC's novel design - demountable high temperature superconductor toroidal field (TF) magnets, poloidal magnetic field coils located inside the TF, and vacuum vessel (VV) immersed in molten salt FLiBe blanket - this follow-on study has identified innovative and potentially robust power exhaust management solutions.
△ Less
Submitted 26 September, 2018;
originally announced September 2018.
-
Intermittent electron density and temperature fluctuations and associated fluxes in the Alcator C-Mod scrape-off layer
Authors:
Ralph Kube,
Odd Erik Garcia,
Audun Theodorsen,
Dan Brunner,
Adam QingYang Kuang,
Brian LaBombard,
James L. Terry
Abstract:
The Alcator C-Mod mirror Langmuir probe system has been used to sample data time series of fluctuating plasma parameters in the outboard mid-plane far scrape-off layer. We present a statistical analysis of one second long time series of electron density, temperature, radial electric drift velocity and the corresponding particle and electron heat fluxes. These are sampled during stationary plasma c…
▽ More
The Alcator C-Mod mirror Langmuir probe system has been used to sample data time series of fluctuating plasma parameters in the outboard mid-plane far scrape-off layer. We present a statistical analysis of one second long time series of electron density, temperature, radial electric drift velocity and the corresponding particle and electron heat fluxes. These are sampled during stationary plasma conditions in an ohmically heated, lower single null diverted discharge.
The electron density and temperature are strongly correlated and feature fluctuation statistics similar to the ion saturation current. Both electron density and temperature time series are dominated by intermittent, large-amplitude burst with an exponential distribution of both burst amplitudes and waiting times between them.
The characteristic time scale of the large-amplitude bursts is approximately 15μs. Large-amplitude velocity fluctuations feature a slightly faster characteristic time scale and appear at a faster rate than electron density and temperature fluctuations.
Describing these time series as a superposition of uncorrelated exponential pulses, we find that probability distribution functions, power spectral densities as well as auto-correlation functions of the data time series agree well with predictions from the stochastic model.
The electron particle and heat fluxes present large-amplitude fluctuations. For this low-density plasma, the radial electron heat flux is dominated by convection, that is, correlations of fluctuations in the electron density and radial velocity. Hot and dense blobs contribute approximately 6% of the total fluctuation driven heat flux.
△ Less
Submitted 14 March, 2018;
originally announced March 2018.
