-
Amplitude and frequency sensing of microwave fields with a superconducting transmon qudit
Authors:
Maximilian Kristen,
Andre Schneider,
Alexander Stehli,
Tim Wolz,
Sergey Danilin,
Hsiang S. Ku,
Junling Long,
Xian Wu,
Russell E. Lake,
David P. Pappas,
Alexey V. Ustinov,
Martin Weides
Abstract:
Experiments with superconducting circuits require careful calibration of the applied pulses and fields over a large frequency range. This remains an ongoing challenge as commercial semiconductor electronics are not able to probe signals arriving at the chip due to its cryogenic environment. Here, we demonstrate how the on-chip amplitude and frequency of a microwave signal can be inferred from the…
▽ More
Experiments with superconducting circuits require careful calibration of the applied pulses and fields over a large frequency range. This remains an ongoing challenge as commercial semiconductor electronics are not able to probe signals arriving at the chip due to its cryogenic environment. Here, we demonstrate how the on-chip amplitude and frequency of a microwave signal can be inferred from the ac Stark shifts of higher transmon levels. In our time-resolved measurements we employ Ramsey fringes, allowing us to detect the amplitude of the systems transfer function over a range of several hundreds of MHz with an energy sensitivity on the order of $10^{-4}$. Combined with similar measurements for the phase of the transfer function, our sensing method can facilitate pulse correction for high fidelity quantum gates in superconducting circuits. Additionally, the potential to characterize arbitrary microwave fields promotes applications in related areas of research, such as quantum optics or hybrid microwave systems including photonic, mechanical or magnonic subsystems.
△ Less
Submitted 20 May, 2020; v1 submitted 26 August, 2019;
originally announced August 2019.
-
Kinetic Inductance Traveling Wave Amplifiers For Multiplexed Qubit Readout
Authors:
Leonardo Ranzani,
Mustafa Bal,
Kin Chung Fong,
Guilhem Ribeill,
Xian Wu,
Junling Long,
Hsiang Sheng Ku,
Robert P. Erickson,
David Pappas,
Thomas A. Ohki
Abstract:
We describe a kinetic inductance traveling-wave (KIT) amplifier suitable for superconducting quantum information measurements and characterize its wideband scattering and noise properties. We use mechanical microwave switches to calibrate the four amplifier scattering parameters up to the device input and output connectors at the dilution refrigerator base temperature and a tunable temperature loa…
▽ More
We describe a kinetic inductance traveling-wave (KIT) amplifier suitable for superconducting quantum information measurements and characterize its wideband scattering and noise properties. We use mechanical microwave switches to calibrate the four amplifier scattering parameters up to the device input and output connectors at the dilution refrigerator base temperature and a tunable temperature load to characterize the amplifier noise. Finally, we demonstrate the high fidelity simultaneous dispersive readout of two superconducting transmon qubits. The KIT amplifier provides low-noise amplification of both readout tones with readout fidelities of 83% and 89% and negligible effect on qubit lifetime and coherence.
△ Less
Submitted 27 November, 2018; v1 submitted 28 September, 2018;
originally announced September 2018.
-
Overlap junctions for high coherence superconducting qubits
Authors:
X. Wu,
J. L. Long,
H. S. Ku,
R. E. Lake,
M. Bal,
D. P. Pappas
Abstract:
Fabrication of sub-micron Josephson junctions is demonstrated using standard processing techniques for high-coherence, superconducting qubits. These junctions are made in two separate lithography steps with normal-angle evaporation. Most significantly, this work demonstrates that it is possible to achieve high coherence with junctions formed on aluminum surfaces cleaned in situ with Ar milling bef…
▽ More
Fabrication of sub-micron Josephson junctions is demonstrated using standard processing techniques for high-coherence, superconducting qubits. These junctions are made in two separate lithography steps with normal-angle evaporation. Most significantly, this work demonstrates that it is possible to achieve high coherence with junctions formed on aluminum surfaces cleaned in situ with Ar milling before the junction oxidation. This method eliminates the angle-dependent shadow masks typically used for small junctions. Therefore, this is conducive to the implementation of typical methods for improving margins and yield using conventional CMOS processing. The current method uses electron-beam lithography and an additive process to define the top and bottom electrodes. Extension of this work to optical lithography and subtractive processes is discussed.
△ Less
Submitted 24 May, 2017;
originally announced May 2017.
-
Electromagnetically induced transparency in circuit QED with nested polariton states
Authors:
Junling Long,
H. S. Ku,
Xian Wu,
Xiu Gu,
Russell E. Lake,
Mustafa Bal,
Yu-xi Liu,
David P. Pappas
Abstract:
Electromagnetically induced transparency (EIT) is a signature of quantum interference in an atomic three-level system. By driving the dressed cavity-qubit states of a two-dimensional circuit QED system, we generate a set of polariton states in the nesting regime. The lowest three energy levels are utilized to form the $Λ$-type system. EIT is observed and verified by Akaike's information criterion…
▽ More
Electromagnetically induced transparency (EIT) is a signature of quantum interference in an atomic three-level system. By driving the dressed cavity-qubit states of a two-dimensional circuit QED system, we generate a set of polariton states in the nesting regime. The lowest three energy levels are utilized to form the $Λ$-type system. EIT is observed and verified by Akaike's information criterion based testing. Negative group velocities up to $-0.52\pm0.09$ km/s are obtained based on the dispersion relation in the EIT transmission spectrum.
△ Less
Submitted 25 February, 2018; v1 submitted 27 April, 2017;
originally announced April 2017.
-
Qubit gates using hyperbolic secant pulses
Authors:
H. S. Ku,
J. L. Long,
X. Wu,
M. Bal,
R. E. Lake,
Edwin Barnes,
Sophia E. Economou,
D. P. Pappas
Abstract:
It has been known since the early days of quantum mechanics that hyperbolic secant pulses possess the unique property that they can perform cyclic evolution on two-level quantum systems independently of the pulse detuning. More recently, it was realized that they induce detuning- controlled phases without changing state populations. Here, we experimentally demonstrate the properties of hyperbolic…
▽ More
It has been known since the early days of quantum mechanics that hyperbolic secant pulses possess the unique property that they can perform cyclic evolution on two-level quantum systems independently of the pulse detuning. More recently, it was realized that they induce detuning- controlled phases without changing state populations. Here, we experimentally demonstrate the properties of hyperbolic secant pulses on superconducting transmon qubits and contrast them with the more commonly used Gaussian and square waves. We further show that these properties can be exploited to implement phase gates, nominally without exiting the computational subspace. This enables us to demonstrate the first microwave-driven Z-gates with a single control parameter, the detuning.
△ Less
Submitted 5 April, 2017; v1 submitted 3 April, 2017;
originally announced April 2017.
-
Generating and verifying entangled itinerant microwave fields with efficient and independent measurements
Authors:
H. S. Ku,
W. F. Kindel,
F. Mallet,
S. Glancy,
K. D. Irwin,
G. C. Hilton,
L. R. Vale,
K. W. Lehnert
Abstract:
By combining a squeezed propagating microwave field and an unsqueezed vacuum field on a hybrid (microwave beam-splitter), we generate entanglement between the two output modes. We verify that we have generated entangled states by making independent and efficient single-quadrature measurements of the two output modes. We observe the entanglement witness $E_\mathrm{W}=-0.263^{+0.001}_{-0.036}$ and t…
▽ More
By combining a squeezed propagating microwave field and an unsqueezed vacuum field on a hybrid (microwave beam-splitter), we generate entanglement between the two output modes. We verify that we have generated entangled states by making independent and efficient single-quadrature measurements of the two output modes. We observe the entanglement witness $E_\mathrm{W}=-0.263^{+0.001}_{-0.036}$ and the negativity $N=0.0824^{+0.01}_{-0.0004}$ with measurement efficiencies at least $26\pm{0.1}\%$ and $41\pm{0.2}\%$ for channel~1 and 2 respectively. These measurements show that the output two-mode state violates the separability criterion and therefore demonstrate entanglement. This shared entanglement between propagating microwaves provides an important resource for building quantum networks with superconducting microwave systems.
△ Less
Submitted 12 February, 2015;
originally announced February 2015.
-
Tunable coupling to a mechanical oscillator circuit using a coherent feedback network
Authors:
Joseph Kerckhoff,
Reed W. Andrews,
H. S. Ku,
William F. Kindel,
Katarina Cicak,
Raymond W. Simmonds,
K. W. Lehnert
Abstract:
We demonstrate a fully cryogenic microwave feedback network composed of modular superconducting devices connected by transmission lines and designed to control a mechanical oscillator coupled to one of the devices. The network features an electromechanical device and a tunable controller that coherently receives, processes and feeds back continuous microwave signals that modify the dynamics and re…
▽ More
We demonstrate a fully cryogenic microwave feedback network composed of modular superconducting devices connected by transmission lines and designed to control a mechanical oscillator coupled to one of the devices. The network features an electromechanical device and a tunable controller that coherently receives, processes and feeds back continuous microwave signals that modify the dynamics and readout of the mechanical state. While previous electromechanical systems represent some compromise between efficient control and efficient readout of the mechanical state, as set by the electromagnetic decay rate, the tunable controller produces a closed-loop network that can be dynamically and continuously tuned between both extremes much faster than the mechanical response time. We demonstrate that the microwave decay rate may be modulated by at least a factor of 10 at a rate greater than $10^4$ times the mechanical response rate. The system is easy to build and suggests that some useful functions may arise most naturally at the network-level of modular, quantum electromagnetic devices.
△ Less
Submitted 7 June, 2013; v1 submitted 8 November, 2012;
originally announced November 2012.
-
Quantum state tomography of an itinerant squeezed microwave field
Authors:
F. Mallet,
M. A. Castellanos-Beltran,
H. S. Ku,
S. Glancy,
E. Knill,
K. D. Irwin,
G. C. Hilton,
L. R. Vale,
K. W. Lehnert
Abstract:
We perform state tomography of an itinerant squeezed state of the microwave field prepared by a Josephson parametric amplifier (JPA). We use a second JPA as a pre-amplifier to improve the quantum efficiency of the field quadrature measurement (QM) from 2% to 36 +/- 4%. Without correcting for the detection inefficiency we observe a minimum quadrature variance which is 69 +/- 8% of the variance of t…
▽ More
We perform state tomography of an itinerant squeezed state of the microwave field prepared by a Josephson parametric amplifier (JPA). We use a second JPA as a pre-amplifier to improve the quantum efficiency of the field quadrature measurement (QM) from 2% to 36 +/- 4%. Without correcting for the detection inefficiency we observe a minimum quadrature variance which is 69 +/- 8% of the variance of the vacuum. We reconstruct the state's density matrix by a maximum likelihood method and infer that the squeezed state has a minimum variance less than 40% of the vacuum, with uncertainty mostly caused by calibration systematics.
△ Less
Submitted 6 May, 2011; v1 submitted 30 November, 2010;
originally announced December 2010.
-
Design and Testing of Superconducting Microwave Passive Components for Quantum Information Processing
Authors:
H. S. Ku,
F. Mallet,
L. R. Vale,
K. D. Irwin,
S. E. Russek,
G. C. Hilton,
K. W. Lehnert
Abstract:
We report on the design, fabrication and testing of two superconducting passive microwave components, a quadrature hybrid and a 20 dB directional coupler. These components are designed to be integrated with superconducting qubits or Josephson parametric amplifiers and used in quantum information processing applications. For the coupler, we measure return loss and isolation > 20 dB, and insertion l…
▽ More
We report on the design, fabrication and testing of two superconducting passive microwave components, a quadrature hybrid and a 20 dB directional coupler. These components are designed to be integrated with superconducting qubits or Josephson parametric amplifiers and used in quantum information processing applications. For the coupler, we measure return loss and isolation > 20 dB, and insertion loss < 0.3 dB in a 2 GHz band around 6 GHz. For the hybrid performance, we measure isolation > 20 dB and insertion loss < 0.3 dB in a 10% band around 6.5 GHz. These values are within the design specifications of our application; however, we find a 7% difference between the designed and measured center frequency for the hybrid.
△ Less
Submitted 15 October, 2010;
originally announced October 2010.
