-
Intergranular Hotspots: A Molecular Dynamics Study on the Influence of Compressive and Shear Work
Authors:
Brenden W. Hamilton,
Matthew P. Kroonblawd,
Jalen Macatangay,
H. Keo Springer,
Alejandro Strachan
Abstract:
Numerous crystal- and microstructural-level mechanisms are at play in the formation of hotspots, which are known to govern high explosive initiation behavior. Most of these mechanisms, including pore collapse, interfacial friction, and shear banding, involve both compressive and shear work done within the material and have thus far remained difficult to separate. We assess hotspots formed at shock…
▽ More
Numerous crystal- and microstructural-level mechanisms are at play in the formation of hotspots, which are known to govern high explosive initiation behavior. Most of these mechanisms, including pore collapse, interfacial friction, and shear banding, involve both compressive and shear work done within the material and have thus far remained difficult to separate. We assess hotspots formed at shocked crystal-crystal interfaces using quasi-1D molecular dynamics simulations that isolate effects due to compression and shear. Two high explosive materials are considered (TATB and PETN) that exhibit distinctly different levels of molecular conformational flexibility and crystal packing anisotropy. Temperature and intra-molecular strain energy localization in the hotspot is assessed through parametric variation of the crystal orientation and two velocity components that respectively modulate compression and shear work. The resulting hotspots are found to be highly localized to a region within 5-20 nm of the crystal-crystal interface. Compressive work plays a considerably larger role in localizing temperature and intra-molecular strain energy for both materials and all crystal orientations considered. Shear induces a moderate increase in energy localization relative to unsheared cases only for relatively weak compressive shock pressures of approximately 10 GPa. These results help isolate and rank the relative importance of hotspot generation mechanisms and are anticipated to guide the treatment of crystal-crystal interfaces in coarse-grained models of polycrystalline high explosive materials.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Extemporaneous Mechanochemistry: Shockwave Induced Ultrafast Chemical Reactions Due to Intramolecular Strain Energy
Authors:
Brenden W. Hamilton,
Matthew P. Kroonblawd,
Alejandro Strachan
Abstract:
Regions of energy localization referred to as hotspots are known to govern shock initiation and the run-to-detonation in energetic materials. Mounting computational evidence points to accelerated chemistry in hotspots from large intramolecular strains induced via the interactions between the shockwave and microstructure. However, definite evidence map** intramolecular strain to accelerated or al…
▽ More
Regions of energy localization referred to as hotspots are known to govern shock initiation and the run-to-detonation in energetic materials. Mounting computational evidence points to accelerated chemistry in hotspots from large intramolecular strains induced via the interactions between the shockwave and microstructure. However, definite evidence map** intramolecular strain to accelerated or altered chemical reactions has so far been elusive. From a large-scale reactive molecular dynamics simulation of the energetic material TATB, we map molecular temperature and intramolecular strain energy prior to reaction to decomposition kinetics. Both temperature and intramolecular strain are shown to accelerate chemical kinetics. A detailed analysis of the atomistic trajectory shows that intramolecular strain can induce a mechanochemical alteration of decomposition mechanisms. The results in this paper can inform continuum-level chemistry models to account for a wide range of mechanochemical effects.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
The Potential Energy Hotspot: Effects from Impact Velocity, Defect Geometry, and Crystallographic Orientation
Authors:
Brenden W. Hamilton,
Matthew P. Kroonblawd,
Alejandro Strachan
Abstract:
In energetic materials, the localization of energy into "hotspots" when a shock wave interacts with the material's microstructure is known to dictate the initiation of chemical reactions and detonation. Recent results have shown that, following the shock-induced collapse of pores with circular cross-sections, more energy is localized as internal potential energy (PE) than can be inferred from the…
▽ More
In energetic materials, the localization of energy into "hotspots" when a shock wave interacts with the material's microstructure is known to dictate the initiation of chemical reactions and detonation. Recent results have shown that, following the shock-induced collapse of pores with circular cross-sections, more energy is localized as internal potential energy (PE) than can be inferred from the kinetic energy (KE) distribution. This leads to a complex thermo-mechanical state that is typically overlooked. The mechanisms associated with pore collapse and hotspot formation and the resulting energy localization are known to be highly dependent on material properties, especially its ability to deform plastically and alleviate strain energy, as well as the size and shape of the pore. Therefore, we use molecular dynamics simulations to characterize shock-induced pore collapse and the subsequent formation of hotspots in TATB, a highly anisotropic molecular crystal, for various defect shapes, shock strengths and crystallographic orientations. We find that the the localization of energy as PE is consistently higher and its extent larger than as localized as KE. A detailed analysis of the MD trajectories reveal the underlying molecular process that govern the effect of orientation and pore shape on the resulting hotspots. We find that the regions of highest PE for a given KE relate to not the impact front of the collapse, but the areas of maximum plastic deformation, while KE is maximized at the point of impact. A comparison with previous results in HMX reveal less energy localization in TATB which could be a contributing factor to its insensitivity.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
A Hotspots Better Half: Non-Equilibrium Intra-Molecular Strain in Shock Physics
Authors:
Brenden W. Hamilton,
Matthew P. Kroonblawd,
Chunyu Li,
Alejandro Strachan
Abstract:
Shockwave interactions with material microstructure localizes energy into hotspots, which act as nucleation sites for complex processes such as phase transformations and chemical reactions. To date, hotspots have been described via their temperature fields. Nonreactive, all-atom molecular dynamics simulations of shock-induced pore collapse in a molecular crystal show that more energy is localized…
▽ More
Shockwave interactions with material microstructure localizes energy into hotspots, which act as nucleation sites for complex processes such as phase transformations and chemical reactions. To date, hotspots have been described via their temperature fields. Nonreactive, all-atom molecular dynamics simulations of shock-induced pore collapse in a molecular crystal show that more energy is localized as potential energy (PE) than can be inferred from the temperature field and that PE localization persists through thermal diffusion. The origin of the PE hotspot is traced to large intra-molecular strains, storing energy in modes readily available for chemical decomposition.
△ Less
Submitted 18 December, 2020;
originally announced December 2020.
-
Detonation-induced transformation of graphite to hexagonal diamond
Authors:
Elissaios Stavrou,
Michael Bagge-Hansen,
Joshua A. Hammons,
Michael H. Nielsen,
Bradley A. Steele,
Penghao Xiao,
Matthew P. Kroonblawd,
Matthew D. Nelms,
William L. Shaw,
Will Bassett,
Sorin Bastea,
Lisa M. Lauderbach,
Ralph L. Hodgin,
Nicholas A. Perez-Marty,
Saransh Singh,
Pinaki Das,
Yuelin Li,
Adam Schuman,
Nicholas Sinclair,
Kamel Fezzaa,
Alex Deriy,
Lara D. Leininger,
Trevor M. Willey
Abstract:
We explore the structural evolution of highly oriented pyrolytic graphite (HOPG) under detonation-induced shock conditions using in-situ synchrotron X-ray diffraction in the ns time scale. We observe the formation of hexagonal diamond (lonsdaleite) at pressures above 50 GPa, in qualitative agreement with recent gas gun experiments. First-principles density functional calculations reveal that under…
▽ More
We explore the structural evolution of highly oriented pyrolytic graphite (HOPG) under detonation-induced shock conditions using in-situ synchrotron X-ray diffraction in the ns time scale. We observe the formation of hexagonal diamond (lonsdaleite) at pressures above 50 GPa, in qualitative agreement with recent gas gun experiments. First-principles density functional calculations reveal that under uniaxial compression the energy barrier for the transition towards hexagonal diamond is lower than cubic diamond. Finally, no indication of cubic diamond formation was observed up to >70 GPa.
△ Less
Submitted 22 July, 2020;
originally announced July 2020.
-
Task-based Parallel Computation of the Density Matrix in Quantum-based Molecular Dynamics using Graph Partitioning
Authors:
Purnima Ghale,
Matthew P. Kroonblawd,
Susan M. Mniszewski,
Christian F. A. Negre,
Robert Pavel,
Sergio Pino,
Vivek B. Sardeshmukh,
Guangjie Shi,
Georg Hahn
Abstract:
Quantum-based molecular dynamics (QMD) is a highly accurate and transferable method for material science simulations. However, the time scales and system sizes accessible to QMD are typically limited to picoseconds and a few hundred atoms. These constraints arise due to expensive self-consistent ground-state electronic structure calculations that can often scale cubically with the number of atoms.…
▽ More
Quantum-based molecular dynamics (QMD) is a highly accurate and transferable method for material science simulations. However, the time scales and system sizes accessible to QMD are typically limited to picoseconds and a few hundred atoms. These constraints arise due to expensive self-consistent ground-state electronic structure calculations that can often scale cubically with the number of atoms. Linearly scaling methods depend on computing the density matrix P from the Hamiltonian matrix H by exploiting the sparsity in both matrices. The second-order spectral projection (SP2) algorithm is an O(N) algorithm that computes P with a sequence of 40-50 matrix-matrix multiplications. In this paper, we present task-based implementations of a recently developed data-parallel graph-based approach to the SP2 algorithm, G-SP2. We represent the density matrix P as an undirected graph and use graph partitioning techniques to divide the computation into smaller independent tasks. The partitions thus obtained are generally not of equal size and give rise to undesirable load imbalances in standard MPI-based implementations. This load-balancing challenge can be mitigated by dynamically scheduling parallel computations at runtime using task-based programming models. We develop task-based implementations of the data-parallel G-SP2 algorithm using both Intel's Concurrent Collections (CnC) as well as the Charm++ programming model and evaluate these implementations for future use. Scaling and performance results of our implementations are investigated for representative segments of QMD simulations for solvated protein systems containing more than 10,000 atoms.
△ Less
Submitted 25 January, 2018;
originally announced January 2018.