-
SrRuO3 under tensile strain: Thickness-dependent electronic and magnetic properties
Authors:
Yuki K. Wakabayashi,
Masaki Kobayashi,
Yuichi Seki,
Kohei Yamagami,
Takahito Takeda,
Takuo Ohkochi,
Yoshitaka Taniyasu,
Yoshiharu Krockenberger,
Hideki Yamamoto
Abstract:
The burgeoning fields of spintronics and topological electronics require materials possessing a unique combination of properties: ferromagnetism, metallicity, and chemical stability. SrRuO3 (SRO) stands out as a compelling candidate due to its exceptional combination of these attributes. However, understanding its behavior under tensile strain, especially its thickness-dependent changes, remains e…
▽ More
The burgeoning fields of spintronics and topological electronics require materials possessing a unique combination of properties: ferromagnetism, metallicity, and chemical stability. SrRuO3 (SRO) stands out as a compelling candidate due to its exceptional combination of these attributes. However, understanding its behavior under tensile strain, especially its thickness-dependent changes, remains elusive. This study employs machine-learning-assisted molecular beam epitaxy to investigate SRO films with thicknesses from 1 to 10 nm. This work complements the existing focus on compressive-strained SRO, opening a new avenue for exploring its hitherto concealed potential. Using soft X-ray magnetic circular dichroism, we uncover an intriguing interplay between film thickness, electronic structure, and magnetic properties. Our key findings reveal an intensified localization of Ru 4d t2g-O 2p hybridized states at lower thicknesses, attributed to the weakened orbital hybridization. Furthermore, we find a progressive reduction of magnetic moments for both Ru and O ions as film thickness decreases. Notably, a non-ferromagnetic insulating state emerges at a critical thickness of 1 nm, marking a pivotal transition from the metallic ferromagnetic phase. These insights emphasize the importance of considering thickness-dependent properties when tailoring SRO for next-generation spintronic and topological electronic devices.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Berezinskii-Kosterlitz-Thouless transition in rhenium nitride films
Authors:
Kosuke Takiguchi,
Yoshiharu Krockenberger,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
The quest to manipulate and understand superconductivity demands exploring diverse materials and unconventional behaviors. Here, we investigate the BKT transition in synthesized ReN$_x$ thin films, demonstrating their emergence as a compelling platform for studying this pivotal phenomenon. By systematically varying synthesis parameters, we achieve ReN$_x$ films exhibiting a BKT transition comparab…
▽ More
The quest to manipulate and understand superconductivity demands exploring diverse materials and unconventional behaviors. Here, we investigate the BKT transition in synthesized ReN$_x$ thin films, demonstrating their emergence as a compelling platform for studying this pivotal phenomenon. By systematically varying synthesis parameters, we achieve ReN$_x$ films exhibiting a BKT transition comparable or even surpassing the archetypal NbN$_x$ system. Detailed current-voltage measurements unlock the intrinsic parameters of the BKT transition, revealing the critical role of suppressed superconducting volume in pushing ReN$_x$ towards the two-dimensional limit. Utilizing this two-dimensional electron system, we employ Beasley-Mooij-Orlando (BMO) theory to extract the vortex unbinding transition temperature and superelectron density at the critical point. Further confirmation of the BKT transition is obtained through temperature-dependent resistivity, current-voltage, and magnetoresistance measurements. Our findings suggest that native disorder and inhomogeneity within ReN$_x$ thin films act to suppress long-range coherence, ultimately driving the system towards the BKT regime. This work establishes ReN$_x$ as a promising material for exploring BKT physics and paves the way for tailoring its properties for potential applications in superconducting devices.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Magnetic anisotropy driven by ligand in 4d transition metal oxide SrRuO3
Authors:
Yuki K. Wakabayashi,
Masaki Kobayashi,
Yuichi Seki,
Yoshinori Kotani,
Takuo Ohkochi,
Kohei Yamagami,
Miho Kitamura,
Yoshitaka Taniyasu,
Yoshiharu Krockenberger,
Hideki Yamamoto
Abstract:
The origin of magnetic anisotropy in magnetic compounds is a longstanding issue in solid state physics and nonmagnetic ligand ions are considered to contribute little to magnetic anisotropy. Here, we introduce the concept of ligand driven magnetic anisotropy in a complex transition-metal oxide. We conducted X ray absorption and X ray magnetic circular dichroism spectroscopies at the Ru and O edges…
▽ More
The origin of magnetic anisotropy in magnetic compounds is a longstanding issue in solid state physics and nonmagnetic ligand ions are considered to contribute little to magnetic anisotropy. Here, we introduce the concept of ligand driven magnetic anisotropy in a complex transition-metal oxide. We conducted X ray absorption and X ray magnetic circular dichroism spectroscopies at the Ru and O edges in the 4d ferromagnetic metal SrRuO3. Systematic variation of the sample thickness in the range below 10 nm allowed us to control the localization of Ru 4d t2g states, which affects the magnetic coupling between the Ru and O ions. We found that the orbital magnetization of the ligand induced via hybridization with the Ru 4d orbital determines the magnetic anisotropy in SrRuO3.
△ Less
Submitted 13 September, 2023; v1 submitted 11 September, 2023;
originally announced September 2023.
-
Collective nature of orbital excitations in layered cuprates in the absence of apical oxygens
Authors:
Leonardo Martinelli,
Krzysztof Wohlfeld,
Jonathan Pelliciari,
Riccardo Arpaia,
Nicholas B. Brookes,
Daniele Di Castro,
Mirian G. Fernandez,
Mingu Kang,
Yoshiharu Krockenberger,
Kurt Kummer,
Daniel E. McNally,
Eugenio Paris,
Thorsten Schmitt,
Hideki Yamamoto,
Andrew Walters,
Ke-** Zhou,
Lucio Braicovich,
Riccardo Comin,
Marco Moretti Sala,
Thomas P. Devereaux,
Maria Daghofer,
Giacomo Ghiringhelli
Abstract:
We have investigated the 3d orbital excitations in CaCuO2 (CCO), Nd2CuO4 (NCO), and La2CuO4 (LCO) using high-resolution resonant inelastic x-ray scattering. In LCO they behave as well-localized excitations, similarly to several other cuprates. On the contrary, in CCO and NCO the dxy orbital clearly disperse, pointing to a collective character of this excitation (orbiton) in compounds without apica…
▽ More
We have investigated the 3d orbital excitations in CaCuO2 (CCO), Nd2CuO4 (NCO), and La2CuO4 (LCO) using high-resolution resonant inelastic x-ray scattering. In LCO they behave as well-localized excitations, similarly to several other cuprates. On the contrary, in CCO and NCO the dxy orbital clearly disperse, pointing to a collective character of this excitation (orbiton) in compounds without apical oxygen. We ascribe the origin of the dispersion as stemming from a substantial next-nearest-neighbor (NNN) orbital superexchange. Such an exchange leads to the liberation of orbiton from its coupling to magnons, which is associated with the orbiton hop** between nearest neighbor copper sites. We show that the exceptionally large NNN orbital superexchange can be traced back to the absence of apical oxygens suppressing the charge transfer energy.
△ Less
Submitted 9 February, 2024; v1 submitted 4 April, 2023;
originally announced April 2023.
-
Stoichiometric growth of SrTiO3 films via Bayesian optimization with adaptive prior mean
Authors:
Yuki K. Wakabayashi,
Takuma Otsuka,
Yoshiharu Krockenberger,
Hiroshi Sawada,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
Perovskite insulator SrTiO3 is expected to be applied to the next generation of electronic and photonic devices as high-k capacitors and photocatalysts. However, reproducible growth of highly insulating stoichiometric SrTiO3 films remains challenging due to the difficulty of the precise stoichiometry control in perovskite oxide films. Here, to grow stoichiometric SrTiO3 thin films by fine-tuning m…
▽ More
Perovskite insulator SrTiO3 is expected to be applied to the next generation of electronic and photonic devices as high-k capacitors and photocatalysts. However, reproducible growth of highly insulating stoichiometric SrTiO3 films remains challenging due to the difficulty of the precise stoichiometry control in perovskite oxide films. Here, to grow stoichiometric SrTiO3 thin films by fine-tuning multiple growth conditions, we developed a new Bayesian optimization (BO)-based machine learning method that encourages the exploration of the search space by varying the prior mean to get out of suboptimal growth condition parameters. Using simulated data, we demonstrate the efficacy of the new BO method, which reproducibly reaches the global best conditions. With the BO method implemented in machine-learning-assisted molecular beam epitaxy (ML-MBE), highly insulating stoichiometric SrTiO3 film with no absorption in the band gap was developed in only 44 MBE growth runs. The proposed algorithm provides an efficient experimental design platform that is not as dependent on the experience of individual researchers and will accelerate not only oxide electronics but also various material syntheses.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Scattering-dependent transport of SrRuO3 films: From Weyl fermion transport to hump-like Hall effect anomaly
Authors:
Shingo Kaneta-Takada,
Yuki K. Wakabayashi,
Yoshiharu Krockenberger,
Hiroshi Irie,
Shinobu Ohya,
Masaaki Tanaka,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
Recent observation of quantum transport phenomena of Weyl fermions has brought much attention to 4d ferromagnetic perovskite SrRuO3 as a magnetic Weyl semimetal. Besides, the hump-like Hall effect anomaly, which might have a topological origin, has also been reported for this material. Here, we show that the emergence of such phenomena is governed by the degree of scattering determined by the defe…
▽ More
Recent observation of quantum transport phenomena of Weyl fermions has brought much attention to 4d ferromagnetic perovskite SrRuO3 as a magnetic Weyl semimetal. Besides, the hump-like Hall effect anomaly, which might have a topological origin, has also been reported for this material. Here, we show that the emergence of such phenomena is governed by the degree of scattering determined by the defect density (Ru-deficiency- and/or interface-driven-defect scattering) and measurement temperature (phonon scattering), where the former is controlled by varying the growth conditions of the SrRuO3 films in molecular beam epitaxy as well as the film thickness. The resulting electronic transport properties can be classified into three categories: clean, intermediate, and dirty regimes. The transport of Weyl fermions emerges in the clean regime, whereas that of topologically trivial conduction electrons in the ferromagnetic metal state prevail in the intermediate and dirty regimes. In the clean and intermediate regimes, anomalous Hall resistivity obeys a scaling law incorporating the intrinsic Karplus-Luttinger (Berry phase) and extrinsic side-jump mechanisms. The hump-like Hall effect anomaly is observed only in the dirty regime, which is contrary to the scaling law between anomalous Hall resistivity and longitudinal resistivity. Hence, we conclude that this anomaly is not inherent to the material and does not have a topological origin. We also provide defect- and temperature-dependent transport phase diagrams of stoichiometric SrRuO3 and Ru-deficient SrRu0.7O3 where the appearance of Weyl fermions and hump-like Hall effect anomaly are mapped. These diagrams may serve as a guideline for designing SrRu1-xO3-based spintronic and topological electronic devices.
△ Less
Submitted 9 February, 2023;
originally announced February 2023.
-
Isotropic orbital magnetic moments in magnetically anisotropic SrRuO3 films
Authors:
Yuki K. Wakabayashi,
Masaki Kobayashi,
Yukiharu Takeda,
Miho Kitamura,
Takahito Takeda,
Ryo Okano,
Yoshiharu Krockenberger,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
Epitaxially strained SrRuO3 films have been a model system for understanding the magnetic anisotropy in metallic oxides. In this paper, we investigate the anisotropy of the Ru 4d and O 2p electronic structure and magnetic properties using high-quality epitaxially strained (compressive and tensile) SrRuO3 films grown by machine-learning-assisted molecular beam epitaxy. The element-specific magnetic…
▽ More
Epitaxially strained SrRuO3 films have been a model system for understanding the magnetic anisotropy in metallic oxides. In this paper, we investigate the anisotropy of the Ru 4d and O 2p electronic structure and magnetic properties using high-quality epitaxially strained (compressive and tensile) SrRuO3 films grown by machine-learning-assisted molecular beam epitaxy. The element-specific magnetic properties and the hybridization between the Ru 4d and O 2p orbitals were characterized by Ru M2,3-edge and O K-edge soft X-ray absorption spectroscopy and X-ray magnetic circular dichroism measurements. The magnetization curves for the Ru 4d and O 2p magnetic moments are identical, irrespective of the strain type, indicating the strong magnetic coupling between the Ru and O ions. The electronic structure and the orbital magnetic moment relative to the spin magnetic moment are isotropic despite the perpendicular and in-plane magnetic anisotropy in the compressive-strained and tensile-strained SrRuO3 films; i.e., the orbital magnetic moments have a negligibly small contribution to the magnetic anisotropy. This result contradicts Bruno model, where magnetic anisotropy arises from the difference in the orbital magnetic moment between the perpendicular and in-plane directions. Contributions of strain-induced electric quadrupole moments to the magnetic anisotropy are discussed, too.
△ Less
Submitted 13 May, 2022;
originally announced May 2022.
-
Bayesian optimization with experimental failure for high-throughput materials growth
Authors:
Yuki K. Wakabayashi,
Takuma Otsuka,
Yoshiharu Krockenberger,
Hiroshi Sawada,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
A crucial problem in achieving innovative high-throughput materials growth with machine learning and automation techniques, such as Bayesian optimization (BO) and robotic experimentation, has been a lack of an appropriate way to handle missing data due to experimental failures. Here, we propose a new BO algorithm that complements the missing data in the optimization of materials growth parameters.…
▽ More
A crucial problem in achieving innovative high-throughput materials growth with machine learning and automation techniques, such as Bayesian optimization (BO) and robotic experimentation, has been a lack of an appropriate way to handle missing data due to experimental failures. Here, we propose a new BO algorithm that complements the missing data in the optimization of materials growth parameters. The proposed method provides a flexible optimization algorithm capable of searching a wide multi-dimensional parameter space. We demonstrate the effectiveness of the method with simulated data as well as in its implementation for actual materials growth, namely machine-learning-assisted molecular beam epitaxy (ML-MBE) of SrRuO3, which is widely used as a metallic electrode in oxide electronics. Through the exploitation and exploration in a wide three-dimensional parameter space, while complementing the missing data, we attained tensile-strained SrRuO3 film with a high residual resistivity ratio of 80.1, the highest among tensile-strained SrRuO3 films ever reported, in only 35 MBE growth runs.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Superconductivity in infinite-layer CaCuO2-brownmillerite Ca2Fe2O5 superlattices
Authors:
Ai Ikeda,
Yoshiharu Krockenberger,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
High-temperature cuprate superconductors have naturally a superlattice structure. Infinite-layer CaCuO2 is the common ingredient of cuprates with superconducting transition temperatures above 100 K. However, infinite-layer CaCuO2 by itself does not superconduct. Here we show that superconductivity emerges in artificial superlattices built from infinite-layer CaCuO2 and brownmillerite Ca2Fe2O5 grow…
▽ More
High-temperature cuprate superconductors have naturally a superlattice structure. Infinite-layer CaCuO2 is the common ingredient of cuprates with superconducting transition temperatures above 100 K. However, infinite-layer CaCuO2 by itself does not superconduct. Here we show that superconductivity emerges in artificial superlattices built from infinite-layer CaCuO2 and brownmillerite Ca2Fe2O5 grown by molecular beam epitaxy. X-ray diffraction and electron microscopy characterizations showed that the crystal quality of the infinite-layer CaCuO2 in the superlattices significantly improved compared to bare thin-films of CaCuO2. We found that the induction of superconductivity in [(CaCuO2)n(Ca2Fe2O5)m]N superlattices is also subject to the oxidizing environment used during the cool-down procedure and therefore to a minimization of oxygen vacancies within the CuO2 planes. The inserted Ca2Fe2O5 layers buffer charge imbalances triggered by point defect formation during growth, minimizing cationic defects in the infinite-layer CaCuO2 layers thus stabilizing monolithic infinite-layer CaCuO2 slabs; embedding CaCuO2 within a superlattice enables extended two-dimensional CuO2 planes and therefore superconductivity while Ca2Fe2O5 serves similar to the charge-reservoir layers in the cuprate superconductors synthesized from incongruent melts.
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
Single-domain perpendicular magnetization induced by the coherent O 2p-Ru 4d hybridized state in an ultra-high-quality SrRuO3 film
Authors:
Yuki K. Wakabayashi,
Masaki Kobayashi,
Yukiharu Takeda,
Kosuke Takiguchi,
Hiroshi Irie,
Shin-ichi Fujimori,
Takahito Takeda,
Ryo Okano,
Yoshiharu Krockenberger,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
We investigated the Ru 4d and O 2p electronic structure and magnetic properties of an ultra-high-quality SrRuO3 film on SrTiO3 grown by machine-learning-assisted molecular beam epitaxy. The high itinerancy and long quantum lifetimes of the quasiparticles in the Ru 4d t2g-O 2p hybridized valence band are confirmed by observing the prominent well-screened peak in the Ru 3d core-level photoemission s…
▽ More
We investigated the Ru 4d and O 2p electronic structure and magnetic properties of an ultra-high-quality SrRuO3 film on SrTiO3 grown by machine-learning-assisted molecular beam epitaxy. The high itinerancy and long quantum lifetimes of the quasiparticles in the Ru 4d t2g-O 2p hybridized valence band are confirmed by observing the prominent well-screened peak in the Ru 3d core-level photoemission spectrum, the coherent peak near the Fermi energy in the valence band spectrum, and quantum oscillations in the resistivity. The element-specific magnetic properties and the hybridization between the Ru 4d and O 2p orbitals were characterized by Ru M2,3-edge and O K-edge soft X-ray absorption spectroscopy and X-ray magnetic circular dichroism measurements. The ultra-high-quality SrRuO3 film with the residual resistivity ratio of 86 shows the large orbital magnetic moment of oxygen ions induced by the strong orbital hybridization of the O 2p states with the spin-polarized Ru 4d t2g states. The film also shows single-domain perpendicular magnetization with an almost ideal remanent magnetization ratio of 0.97. These results provide detailed insights into the relevance between orbital hybridization and the perpendicular magnetic anisotropy in SrRuO3/SrTiO3 systems.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
High-mobility two-dimensional carriers from surface Fermi arcs in magnetic Weyl semimetal films
Authors:
Shingo Kaneta-Takada,
Yuki K. Wakabayashi,
Yoshiharu Krockenberger,
Toshihiro Nomura,
Yoshimitsu Kohama,
Sergey A. Nikolaev,
Hena Das,
Hiroshi Irie,
Kosuke Takiguchi,
Shinobu Ohya,
Masaaki Tanaka,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
High-mobility two-dimensional carriers originating from surface Fermi arcs in magnetic Weyl semimetals are highly desired for accessing exotic quantum transport phenomena and for topological electronics applications. Here, we demonstrate high-mobility two-dimensional carriers that show quantum oscillations in magnetic Weyl semimetal SrRuO3 epitaxial films by systematic angle-dependent, high-magnet…
▽ More
High-mobility two-dimensional carriers originating from surface Fermi arcs in magnetic Weyl semimetals are highly desired for accessing exotic quantum transport phenomena and for topological electronics applications. Here, we demonstrate high-mobility two-dimensional carriers that show quantum oscillations in magnetic Weyl semimetal SrRuO3 epitaxial films by systematic angle-dependent, high-magnetic field magnetotransport experiments. The exceptionally high-quality SrRuO3 films were grown by state-of-the-art oxide thin film growth technologies driven by machine learning algorithm. The quantum oscillations for the 10-nm SrRuO3 film show a high quantum mobility of 3500 cm2/Vs, a light cyclotron mass, and two-dimensional angular dependence, which can be attributed to the surface Fermi arcs. The linear thickness dependence of the phase shift of the quantum oscillations provides evidence for the non-trivial nature of the quantum oscillations mediated by the surface Fermi arcs. In addition, at low temperatures and under magnetic fields of up to 52 T, the quantum limit of SrRuO3 manifests the chiral anomaly of the Weyl nodes. Emergence of the hitherto hidden two-dimensional Weyl states in a ferromagnetic oxide pave the way to explore novel quantum transport phenomena for topological oxide electronics.
△ Less
Submitted 22 December, 2021; v1 submitted 6 June, 2021;
originally announced June 2021.
-
Wide-range epitaxial strain control of electrical and magnetic properties in high-quality SrRuO3 films
Authors:
Yuki K. Wakabayashi,
Shingo Kaneta-Takada,
Yoshiharu Krockenberger,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
Epitaxial strain in 4d ferromagnet SrRuO3 films is directly linked to the physical properties through the strong coupling between lattices, electrons, and spins. It provides an excellent opportunity to tune the functionalities of SrRuO3 in electronic and spintronic devices. However, a thorough understanding of the epitaxial strain effect in SrRuO3 has remained elusive due to the lack of systematic…
▽ More
Epitaxial strain in 4d ferromagnet SrRuO3 films is directly linked to the physical properties through the strong coupling between lattices, electrons, and spins. It provides an excellent opportunity to tune the functionalities of SrRuO3 in electronic and spintronic devices. However, a thorough understanding of the epitaxial strain effect in SrRuO3 has remained elusive due to the lack of systematic studies. This study demonstrates wide-range epitaxial strain control of electrical and magnetic properties in high-quality SrRuO3 films. The epitaxial strain was imposed by cubic or pseudocubic perovskite substrates having a lattice mismatch of -1.6 to 2.3% with reference to bulk SrRuO3. The Poisson ratio, which describes the two orthogonal distortions due to the substrate clam** effect, is estimated to be 0.33. The Curie temperature (TC) and residual resistivity ratios of the series of films are higher than or comparable to the highest reported values for SrRuO3 on each substrate, confirming the high crystalline quality of the films. A TC of 169 K is achieved in a tensile-strained SrRuO3 film on the DyScO3 (110) substrate, which is the highest value ever reported for SrRuO3. The TC (146-169 K), magnetic anisotropy (perpendicular or in-plane magnetic easy axis), and metallic conduction (residual resistivity at 2 K of 2.10 - 373 μΩcm) of SrRuO3 are widely controlled by epitaxial strain. These results provide guidelines to design SrRuO3-based heterostructures for device applications.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Structural and transport properties of highly Ru-deficient SrRu0.7O3 thin films prepared by molecular beam epitaxy: comparison with stoichiometric SrRuO3
Authors:
Yuki K. Wakabayashi,
Shingo Kaneta-Takada,
Yoshiharu Krockenberger,
Kosuke Takiguchi,
Shinobu Ohya,
Masaaki Tanaka,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
We investigate structural and transport properties of highly Ru-deficient SrRu0.7O3 thin films prepared by molecular beam epitaxy on (001) SrTiO3 substrates. To distinguish the influence of the two types of disorders in the films, Ru vacancies within lattices and disorders near the interface, SrRu0.7O3 thin films with various thicknesses (t = 1-60 nm) were prepared. It was found that the influence…
▽ More
We investigate structural and transport properties of highly Ru-deficient SrRu0.7O3 thin films prepared by molecular beam epitaxy on (001) SrTiO3 substrates. To distinguish the influence of the two types of disorders in the films, Ru vacancies within lattices and disorders near the interface, SrRu0.7O3 thin films with various thicknesses (t = 1-60 nm) were prepared. It was found that the influence of the former dominates the electrical and magnetic properties when t > 5-10 nm, while that of the latter does when t < 5-10 nm. Structural characterizations revealed that the crystallinity, in terms of the Sr and O sublattices, of SrRu0.7O3 thin films, is as high as that of the ultrahigh-quality SrRuO3 ones. The Curie temperature (TC) analysis elucidated that SrRu0.7O3 (TC = 140 K) is a material distinct from SrRuO3 (TC = 150 K). Despite the large Ru deficiency (30%), the SrRu0.7O3 films showed metallic conduction when t > 5 nm. In high-field magnetoresistance measurements, the fascinating phenomenon of Weyl fermion transport was not observed for the SrRu0.7O3 thin films irrespective of thickness, which is in contrast to the stoichiometric SrRuO3 films. The (magneto)transport properties suggest that a picture of carrier scattering due to the Ru vacancies is appropriate for SrRu0.7O3, and also that proper stoichiometry control is a prerequisite to utilizing the full potential of SrRuO3 as a magnetic Weyl semimetal and two-dimensional spin-polarized system. Nevertheless, the large tolerance in Ru composition (30 %) to metallic conduction is advantageous for some practical applications where SrRu1-xO3 is exploited as an epitaxial conducting layer.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
Thickness-dependent quantum transport of Weyl fermions in ultra-high-quality SrRuO3 films
Authors:
Shingo Kaneta-Takada,
Yuki K. Wakabayashi,
Yoshiharu Krockenberger,
Shinobu Ohya,
Masaaki Tanaka,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
The recent observation of Weyl fermions in the itinerant 4d ferromagnetic perovskite SrRuO3 points to this material being a good platform for exploring novel physics related to a pair of Weyl nodes in epitaxial heterostructures. In this letter, we report the thickness-dependent magnetotransport properties of ultra-high-quality epitaxial SrRuO3 films grown under optimized conditions on SrTiO3 subst…
▽ More
The recent observation of Weyl fermions in the itinerant 4d ferromagnetic perovskite SrRuO3 points to this material being a good platform for exploring novel physics related to a pair of Weyl nodes in epitaxial heterostructures. In this letter, we report the thickness-dependent magnetotransport properties of ultra-high-quality epitaxial SrRuO3 films grown under optimized conditions on SrTiO3 substrates. Signatures of Weyl fermion transport, i.e., unsaturated linear positive magnetoresistance accompanied by a quantum oscillation having a π Berry phase, were observed in films with thicknesses as small as 10 nm. Residual resistivity increased with decreasing film thickness, indicating disorder near the interface between SrRuO3 and the SrTiO3 substrate. Since this disorder affects the magnetic and electrical properties of the films, the Curie temperature decreases and the coercive field increases with decreasing thickness. Thickness-dependent magnetotransport measurements revealed that the threshold residual resistivity ratio (RRR) to observe Weyl fermion transport is 21. These results provide guidelines for realizing quantum transport of Weyl fermions in SrRuO3 near heterointerfaces.
△ Less
Submitted 6 November, 2020;
originally announced November 2020.
-
Quantum transport evidence of Weyl fermions in an epitaxial ferromagnetic oxide
Authors:
Kosuke Takiguchi,
Yuki K. Wakabayashi,
Hiroshi Irie,
Yoshiharu Krockenberger,
Takuma Otsuka,
Hiroshi Sawada,
Sergey A. Nikolaev,
Hena Das,
Masaaki Tanaka,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
Magnetic Weyl fermions, which occur in magnets, have novel transport phenomena related to pairs of Weyl nodes, and they are, of both, scientific and technological interest, with the potential for use in high-performance electronics, spintronics and quantum computing. Although magnetic Weyl fermions have been predicted to exist in various oxides, evidence for their existence in oxide materials rema…
▽ More
Magnetic Weyl fermions, which occur in magnets, have novel transport phenomena related to pairs of Weyl nodes, and they are, of both, scientific and technological interest, with the potential for use in high-performance electronics, spintronics and quantum computing. Although magnetic Weyl fermions have been predicted to exist in various oxides, evidence for their existence in oxide materials remains elusive. SrRuO3, a 4d ferromagnetic metal often used as an epitaxial conducting layer in oxide heterostructures, provides a promising opportunity to seek for the existence of magnetic Weyl fermions. Advanced oxide thin film preparation techniques, driven by machine learning technologies, may allow access to such topological matter. Here we show direct quantum transport evidence of magnetic Weyl fermions in an epitaxial ferromagnetic oxide SrRuO3: unsaturated linear positive magnetoresistance (MR), chiral-anomaly-induced negative MR, Pi Berry phase accumulated along cyclotron orbits, light cyclotron masses and high quantum mobility of about 10000 cm2/Vs. We employed machine-learning-assisted molecular beam epitaxy (MBE) to synthesize SrRuO3 films whose quality is sufficiently high to probe their intrinsic quantum transport properties. We also clarified the disorder dependence of the transport of the magnetic Weyl fermions, and provided a brand-new diagram for the Weyl transport, which gives a clear guideline for accessing the topologically nontrivial transport phenomena. Our results establish SrRuO3 as a magnetic Weyl semimetal and topological oxide electronics as a new research field.
△ Less
Submitted 26 July, 2020; v1 submitted 2 April, 2020;
originally announced April 2020.
-
Machine-learning-assisted thin-film growth: Bayesian optimization in molecular beam epitaxy of SrRuO3 thin films
Authors:
Yuki K. Wakabayashi,
Takuma Otsuka,
Yoshiharu Krockenberger,
Hiroshi Sawada,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
Materials informatics exploiting machine learning techniques, e.g., Bayesian optimization (BO), has the potential to offer high-throughput optimization of thin-film growth conditions through incremental updates of machine learning models in accordance with newly measured data. Here, we demonstrated BO-based molecular beam epitaxy (MBE) of SrRuO3, one of the most-intensively studied materials in th…
▽ More
Materials informatics exploiting machine learning techniques, e.g., Bayesian optimization (BO), has the potential to offer high-throughput optimization of thin-film growth conditions through incremental updates of machine learning models in accordance with newly measured data. Here, we demonstrated BO-based molecular beam epitaxy (MBE) of SrRuO3, one of the most-intensively studied materials in the research field of oxide electronics, mainly owing to its unique nature as a ferromagnetic metal. To simplify the intricate search space of entangled growth conditions, we ran the BO for a single condition while kee** the other conditions fixed. As a result, high-crystalline-quality SrRuO3 film exhibiting a high residual resistivity ratio (RRR) of over 50 as well as strong perpendicular magnetic anisotropy was developed in only 24 MBE growth runs in which the Ru flux rate, growth temperature, and O3-nozzle-to-substrate distance were optimized. Our BO-based search method provides an efficient experimental design that is not as dependent on the experience and skills of individual researchers, and it reduces experimental time and cost, which will accelerate materials research.
△ Less
Submitted 2 August, 2019;
originally announced August 2019.
-
Resolving the nature of electronic excitations in resonant inelastic x-ray scattering
Authors:
M. Kang,
J. Pelliciari,
Y. Krockenberger,
J. Li,
D. E. McNally,
E. Paris,
R. Liang,
W. N. Hardy,
D. A. Bonn,
H. Yamamoto,
T. Schmitt,
R. Comin
Abstract:
The study of elementary bosonic excitations is essential toward a complete description of quantum electronic solids. In this context, resonant inelastic X-ray scattering (RIXS) has recently risen to becoming a versatile probe of electronic excitations in strongly correlated electron systems. The nature of the radiation-matter interaction endows RIXS with the ability to resolve the charge, spin and…
▽ More
The study of elementary bosonic excitations is essential toward a complete description of quantum electronic solids. In this context, resonant inelastic X-ray scattering (RIXS) has recently risen to becoming a versatile probe of electronic excitations in strongly correlated electron systems. The nature of the radiation-matter interaction endows RIXS with the ability to resolve the charge, spin and orbital nature of individual excitations. However, this capability has been only marginally explored to date. Here, we demonstrate a systematic method for the extraction of the character of excitations as imprinted in the azimuthal dependence of the RIXS signal. Using this novel approach, we resolve the charge, spin, and orbital nature of elastic scattering, (para-)magnon/bimagnon modes, and higher energy dd excitations in magnetically-ordered and superconducting copper-oxide perovskites (Nd2CuO4 and YBa2Cu3O6.75). Our method derives from a direct application of scattering theory, enabling us to deconstruct the complex scattering tensor as a function of energy loss. In particular, we use the characteristic tensorial nature of each excitation to precisely and reliably disentangle the charge and spin contributions to the low energy RIXS spectrum. This procedure enables to separately track the evolution of spin and charge spectral distributions in cuprates with do**. Our results demonstrate a new capability that can be integrated into the RIXS toolset, and that promises to be widely applicable to materials with intertwined spin, orbital, and charge excitations.
△ Less
Submitted 19 January, 2019;
originally announced January 2019.
-
Evolution of charge order topology across a magnetic phase transition in cuprate superconductors
Authors:
Mingu Kang,
Jonathan Pelliciari,
Alex Frano,
Nicholas Breznay,
Enrico Schierle,
Eugen Weschke,
Ronny Sutarto,
Feizhou He,
Padraic Shafer,
Elke Arenholz,
Mo Chen,
Keto Zhang,
Alejandro Ruiz,
Zeyu Hao,
Sylvia Lewin,
James Analytis,
Yoshiharu Krockenberger,
Hideki Yamamoto,
Tanmoy Das,
R. Comin
Abstract:
Charge order is now accepted as an integral constituent of cuprate high-temperature superconductors, one that is intimately related to other instabilities in the phase diagram including antiferromagnetism and superconductivity. Unlike nesting-induced Peierls-like density waves, the charge correlations in the CuO2 planes have been predicted to display a rich momentum space topology depending on the…
▽ More
Charge order is now accepted as an integral constituent of cuprate high-temperature superconductors, one that is intimately related to other instabilities in the phase diagram including antiferromagnetism and superconductivity. Unlike nesting-induced Peierls-like density waves, the charge correlations in the CuO2 planes have been predicted to display a rich momentum space topology depending on the detailed fermiology of the system. However, to date charge order has only been observed along the high-symmetry Cu-O bond directions. Here, using resonant soft X-ray scattering, we investigate the evolution of the full momentum space topology of charge correlations in Ln2CuO4 (Ln=Nd, Pr) as a function of intrinsic electron do**. We report that, upon electron do** the parent Mott insulator, charge correlations first emerge in a hitherto-unobserved form, with full (Cinf) rotational symmetry in momentum-space. At higher do** levels, the orientation of charge correlations is sharply locked to the Cu-O bond high-symmetry directions, restoring a more conventional bidirectional charge order with enhanced correlation lengths. Through charge susceptibility calculations, we closely reproduce the drastic evolution in the topology of charge correlations across an antiferromagnetic quantum phase transition, highlighting the interplay between spin and charge degrees of freedom in electron-doped cuprates. Finally, using the established link between charge correlations and the underlying fermiology, we propose a revised phase diagram of Ln2CuO4 with a superconducting region extending toward the Mott limit.
△ Less
Submitted 24 May, 2019; v1 submitted 18 January, 2019;
originally announced January 2019.
-
Ferromagnetism above 1000 K in highly cation-ordered double-perovskite insulator Sr3OsO6
Authors:
Yuki K. Wakabayashi,
Yoshiharu Krockenberger,
Naoto Tsujimoto,
Tommy Boykin,
Shinji Tsuneyuki,
Yoshitaka Taniyasu,
Hideki Yamamoto
Abstract:
Magnetic insulators have been intensively studied for over 100 years, and they, in particular ferrites, are considered to be the cradle of magnetic exchange interactions in solids. Their wide range of applications include microwave devices and permanent magnets . They are also suitable for spintronic devices owing to their high resistivity, low magnetic dam**, and spin-dependent tunneling probab…
▽ More
Magnetic insulators have been intensively studied for over 100 years, and they, in particular ferrites, are considered to be the cradle of magnetic exchange interactions in solids. Their wide range of applications include microwave devices and permanent magnets . They are also suitable for spintronic devices owing to their high resistivity, low magnetic dam**, and spin-dependent tunneling probabilities. The Curie temperature is the crucial factor determining the temperature range in which any ferri/ferromagnetic system remains stable. However, the record Curie temperature has stood for over eight decades in insulators and oxides (943 K for spinel ferrite LiFe5O8). Here we show that a highly B-site ordered double-perovskite, Sr2(SrOs)O6 (Sr3OsO6), surpasses this long standing Curie temperature record by more than 100 K. We revealed this B-site ordering by atomic-resolution scanning transmission electron microscopy. The density functional theory (DFT) calculations suggest that the large spin-orbit coupling (SOC) of Os6+ 5d2 orbitals drives the system toward a Jeff = 3/2 ferromagnetic (FM) insulating state. Moreover, the Sr3OsO6 is the first epitaxially grown osmate, which means it is highly compatible with device fabrication processes and thus promising for spintronic applications.
△ Less
Submitted 25 June, 2018;
originally announced June 2018.
-
Angle-resolved photoemission spectroscopy of the low-energy electronic structure of superconducting Pr$_2$CuO$_4$ driven by oxygen non-stoichiometry
Authors:
M. Horio,
Y. Krockenberger,
K. Koshiishi,
S. Nakata,
K. Hagiwara,
M. Kobayashi,
K. Horiba,
H. Kumigashira,
H. Irie,
H. Yamamoto,
A. Fujimori
Abstract:
Bulk crystals of electron-doped cuprates with the T'-type structure require both Ce substitutions and reduction annealing for the emergence of superconductivity while the reduction annealing alone can induce superconductivity in thin films of the T'-type cuprates. In order to reveal low-energy electronic states which are responsible for the superconductivity, we have conducted angle-resolved photo…
▽ More
Bulk crystals of electron-doped cuprates with the T'-type structure require both Ce substitutions and reduction annealing for the emergence of superconductivity while the reduction annealing alone can induce superconductivity in thin films of the T'-type cuprates. In order to reveal low-energy electronic states which are responsible for the superconductivity, we have conducted angle-resolved photoemission spectroscopy measurements on thin films of the superconducting Ce-free T'-type cuprate Pr$_2$CuO$_4$. The results indicate that the overall band structure and the Fermi surface area of the superconducting Pr$_2$CuO$_4$ are similar to those of superconducting Ce-doped bulk single crystals, highlighting the importance of the actual electron concentration rather than the Ce concentration when discussing the physical properties of the T'-type cuprates.
△ Less
Submitted 17 July, 2018; v1 submitted 11 January, 2018;
originally announced January 2018.
-
Electronic Structure of Ce-Doped and -Undoped Nd$_2$CuO$_4$ Superconducting Thin Films Studied by Hard X-ray Photoemission and Soft X-ray Absorption Spectroscopy
Authors:
M. Horio,
Y. Krockenberger,
K. Yamamoto,
Y. Yokoyama,
K. Takubo,
Y. Hirata,
S. Sakamoto,
K. Koshiishi,
A. Yasui,
E. Ikenaga,
S. Shin,
H. Yamamoto,
H. Wadati,
A. Fujimori
Abstract:
In order to realize superconductivity in cuprates with the T'-type structure, not only chemical substitution (Ce do**) but also post-growth reduction annealing is necessary. In the case of thin films, however, well-designed reduction annealing alone without Ce do** can induce superconductivity in the T'-type cuprates. In order to unveil the origin of superconductivity in the Ce-undoped T'-type…
▽ More
In order to realize superconductivity in cuprates with the T'-type structure, not only chemical substitution (Ce do**) but also post-growth reduction annealing is necessary. In the case of thin films, however, well-designed reduction annealing alone without Ce do** can induce superconductivity in the T'-type cuprates. In order to unveil the origin of superconductivity in the Ce-undoped T'-type cuprates, we have performed bulk-sensitive hard x-ray photoemission and soft x-ray absorption spectroscopies on superconducting and non-superconducting Nd$_{2-x}$Ce$_x$CuO$_4$ ($x=$ 0, 0.15, and 0.19) thin films. By post-growth annealing, core-level spectra exhibited dramatic changes, which we attributed to the enhancement of core-hole screening in the CuO$_2$ plane and the shift of chemical potential along with changes in the band filling. The result suggests that the superconducting Nd$_2$CuO$_4$ film is doped with electrons and that the electronic states are similar to those of Ce-doped superconductors.
△ Less
Submitted 20 June, 2018; v1 submitted 24 October, 2017;
originally announced October 2017.
-
Shubnikov-de Haas quantum oscilations reveal a reconstructed Fermi surface near optimal do** in a thin film of the cuprate superconductor Pr$_{1.86}$Ce$_{0.14}$CuO$_{4\pmδ}$
Authors:
Nicholas P. Breznay,
Ian M. Hayes,
B. J. Ramshaw,
Ross D. McDonald,
Yoshiharu Krockenberger,
Ai Ikeda,
Hiroshi Irie,
Hideki Yamamoto,
James G. Analytis
Abstract:
We study magnetotransport properties of the electron-doped superconductor Pr$_{2-x}$Ce$_x$CuO$_{4\pmδ}$ with $x$ = 0.14 in magnetic fields up to 92~T, and observe Shubnikov de-Haas magnetic quantum oscillations. The oscillations display a single frequency $F$=255$\pm$10~T, indicating a small Fermi pocket that is $\sim$~1\% of the two-dimensional Brillouin zone and consistent with a Fermi surface r…
▽ More
We study magnetotransport properties of the electron-doped superconductor Pr$_{2-x}$Ce$_x$CuO$_{4\pmδ}$ with $x$ = 0.14 in magnetic fields up to 92~T, and observe Shubnikov de-Haas magnetic quantum oscillations. The oscillations display a single frequency $F$=255$\pm$10~T, indicating a small Fermi pocket that is $\sim$~1\% of the two-dimensional Brillouin zone and consistent with a Fermi surface reconstructed from the large hole-like cylinder predicted for these layered materials. Despite the low nominal do**, all electronic properties including the effective mass and Hall effect are consistent with overdoped compounds. Our study demonstrates that the exceptional chemical control afforded by high quality thin films will enable Fermi surface studies deep into the overdoped cuprate phase diagram.
△ Less
Submitted 2 September, 2016;
originally announced September 2016.
-
Quantum oscillations suggest hidden quantum phase transition in the cuprate superconductor Pr$_{2}$CuO$_{4\pmδ}$
Authors:
Nicholas P. Breznay,
Ross D. McDonald,
Yoshiharu Krockenberger,
K. A. Modic,
Zengwei Zhu,
Ian M. Hayes,
Nityan L. Nair,
Toni Helm,
Hiroshi Irie,
Hideki Yamamoto,
James G. Analytis
Abstract:
For both electron- and hole-doped cuprates, superconductivity appears in the vicinity of suppressed broken symmetry order, suggesting that quantum criticality plays a vital role in the physics of these systems. A confounding factor in identifying the role of quantum criticality in the electron-doped systems is the competing influence of chemical do** and oxygen stoichiometry. Using high quality…
▽ More
For both electron- and hole-doped cuprates, superconductivity appears in the vicinity of suppressed broken symmetry order, suggesting that quantum criticality plays a vital role in the physics of these systems. A confounding factor in identifying the role of quantum criticality in the electron-doped systems is the competing influence of chemical do** and oxygen stoichiometry. Using high quality thin films of Pr$_{2}$CuO$_{4\pmδ}$, we tune superconductivity and uncover the influence of quantum criticality without Ce substitution. We observe magnetic quantum oscillations that are consistent with the presence of small hole-like Fermi surface pockets, and a large mass enhancement near the suppression of superconductivity. Tuning these materials using only oxygen stoichiometry allows the observation of quantum oscillations and provides a new axis with which to explore the physics underlying the electron-doped side of the cuprate phase diagram.
△ Less
Submitted 14 October, 2015;
originally announced October 2015.
-
Bulk superconductivity in undoped T'-La$_{1.9}$Y$_{0.1}$CuO$_4$ probed by muon spin rotation
Authors:
K. M. Kojima,
Y. Krockenberger,
I. Yamauchi,
M. Miyazaki,
M. Hiraishi,
A. Koda,
R. Kadono,
R. Kumai,
H. Yamamoto,
A. Ikeda,
M. Naito
Abstract:
The Meissner effect has been directly demonstrated by depth-resolved muon spin rotation measurements in high-quality thin films of the T'-structured cuprate, T'-La$_{1.9}$Y$_{0.1}$CuO$_4$, to confirm bulk superconductivity ($T_c\simeq21$ K) in its {\sl undoped} state. The gradual expelling of an external magnetic field is observed over a depth range of $\sim$100 nm in films with a thickness of 275…
▽ More
The Meissner effect has been directly demonstrated by depth-resolved muon spin rotation measurements in high-quality thin films of the T'-structured cuprate, T'-La$_{1.9}$Y$_{0.1}$CuO$_4$, to confirm bulk superconductivity ($T_c\simeq21$ K) in its {\sl undoped} state. The gradual expelling of an external magnetic field is observed over a depth range of $\sim$100 nm in films with a thickness of 275(15) nm, from which the penetration depth is deduced to be 466(22) nm. Based on this result, we argue that the true ground state of the "parent" compound of the $n$-type cuprates is not a Mott insulator but a strongly correlated metal with colossal sensitivity to apical oxygen impurities.
△ Less
Submitted 19 May, 2014;
originally announced May 2014.
-
Superconductivity phase diagrams of electron doped cuprates R(2-x)CexCuO4 (R = La, Pr, Nd, Sm, and Eu)
Authors:
Y. Krockenberger,
J. Kurian,
A. Winkler,
A. Tsukada,
M. Naito,
L. Alff
Abstract:
The superconductivity phase diagrams of electron doped cuprates of the form R(2-x)CexCuO4 (with R= La, Pr, Nd, Sm, and Eu) have been determined for cerium compositions 0 < x < 0.36 in a consistent series of epitaxial thin films grown by reactive molecular beam epitaxy (MBE). The use of epitaxial thin films allows the growth of materials away from thermodynamical equilibrium expanding the accessi…
▽ More
The superconductivity phase diagrams of electron doped cuprates of the form R(2-x)CexCuO4 (with R= La, Pr, Nd, Sm, and Eu) have been determined for cerium compositions 0 < x < 0.36 in a consistent series of epitaxial thin films grown by reactive molecular beam epitaxy (MBE). The use of epitaxial thin films allows the growth of materials away from thermodynamical equilibrium expanding the accessible phase space beyond the availability of bulk material. The superconducting phase space systematically increases with the rare earth ionic size. The do** concentration where the maximal transition temperature occurs in La(2-x)CexCuO4 is considerably shifted to lower do** (x ~ 0.09) compared to La(2-x)SrxCuO4 (x ~ 0.15). At the same time, the width of the superconducting region is broadened.
△ Less
Submitted 7 May, 2008;
originally announced May 2008.
-
Superconductivity in epitaxial thin films of NaxCoO2 y D2O
Authors:
Y. Krockenberger,
I. Fritsch,
G. Christiani,
H. -U. Habermeier,
Li Yu,
C. Bernhard,
B. Keimer,
L. Alff
Abstract:
The observation of superconductivity in the layered transition metal oxide NaxCoO2 y H2O (K. Takada et al., Nature 422, 53 (2003)) has caused a tremendous upsurge of scientific interest due to its similarities and its differences to the copper based high-temperature superconductors. Two years after the discovery, we report the fabrication of single-phase superconducting epitaxial thin films of N…
▽ More
The observation of superconductivity in the layered transition metal oxide NaxCoO2 y H2O (K. Takada et al., Nature 422, 53 (2003)) has caused a tremendous upsurge of scientific interest due to its similarities and its differences to the copper based high-temperature superconductors. Two years after the discovery, we report the fabrication of single-phase superconducting epitaxial thin films of Na0.3CoO2 x 1.3 D2O grown by pulsed laser deposition technique. This opens additional roads for experimental research exploring the superconducting state and the phase diagram of this unconventional material.
△ Less
Submitted 3 May, 2007;
originally announced May 2007.
-
Sr2CrOsO6: Endpoint of a spin polarized metal-insulator transition by 5d band filling
Authors:
Y. Krockenberger,
K. Mogare,
M. Reehuis,
M. Tovar,
M. Jansen,
G. Vaitheeswaran,
V. Kanchana,
F. Bultmark,
A. Delin,
F. Wilhelm,
A. Rogalev,
A. Winkler,
L. Alff
Abstract:
In the search for new spintronic materials with high spin-polarization at room-temperature, we have synthesized an osmium based double perovskite with a Curie-temperature of 725 K. Our combined experimental results confirm the existence of a sizable induced magnetic moment at the Os site, supported by band-structure calculations in agreement with a proposed kinetic energy driven mechanism of fer…
▽ More
In the search for new spintronic materials with high spin-polarization at room-temperature, we have synthesized an osmium based double perovskite with a Curie-temperature of 725 K. Our combined experimental results confirm the existence of a sizable induced magnetic moment at the Os site, supported by band-structure calculations in agreement with a proposed kinetic energy driven mechanism of ferrimagnetism in these compounds. The intriguing property of Sr2CrOsO6 is that it is at the endpoint of a metal-insulator transition due to 5d band filling, and at the same time ferrimagnetism and high-spin polarization is preserved.
△ Less
Submitted 2 May, 2007;
originally announced May 2007.
-
Comment on "Raman spectroscopy study of NaxCoO2 and superconducting NaxCoO2 yH2O"
Authors:
P. Lemmens,
P. Scheib,
Y. Krockenberger,
L. Alff,
F. C. Chou,
C. T. Lin,
H. -U. Habermeier,
B. Keimer
Abstract:
The effect of surface degradation of the thermolectric cobaltite on Raman spectra is discussed and compared to experimental results from Co3O4 single crystals. We conclude that on NaCl flux grown NaxCoO2 crystals a surface layer of Co3O4 easily forms that leads to the observation of an intense phonon around 700 cm-1 [Phys. Rev. B 70, 052502 (2004)]. Raman spectra on freshly cleaved crystals from…
▽ More
The effect of surface degradation of the thermolectric cobaltite on Raman spectra is discussed and compared to experimental results from Co3O4 single crystals. We conclude that on NaCl flux grown NaxCoO2 crystals a surface layer of Co3O4 easily forms that leads to the observation of an intense phonon around 700 cm-1 [Phys. Rev. B 70, 052502 (2004)]. Raman spectra on freshly cleaved crystals from optical floating zone ovens do not show such effects and have a high frequency phonon cut-off at approximately 600 cm -1 [Phys. Rev. Lett 96, 167204 (2006)]. We discuss the relation of structural dimensionality, electronic correlations and the high frequency phonon cut-off of the thermolectric cobaltite.
△ Less
Submitted 24 January, 2007;
originally announced January 2007.
-
New class of T-prime-structure cuprate superconductors
Authors:
A. Tsukada,
Y. Krockenberger,
M. Noda,
H. Yamamoto,
D. Manske,
L. Alff,
M. Naito
Abstract:
High-temperature superconductivity has been discovered in La2-xBaxCuO4 [1], a compound that derives from the undoped La2CuO4 crystallizing in the perovskite T-structure. In this structure oxygen octahedra surround the copper ions. It is common knowledge that charge carriers induced by do** in such an undoped antiferromagnetic Mott-insulator lead to high-temperature superconductivity [2- 4]. Th…
▽ More
High-temperature superconductivity has been discovered in La2-xBaxCuO4 [1], a compound that derives from the undoped La2CuO4 crystallizing in the perovskite T-structure. In this structure oxygen octahedra surround the copper ions. It is common knowledge that charge carriers induced by do** in such an undoped antiferromagnetic Mott-insulator lead to high-temperature superconductivity [2- 4]. The undoped material La2CuO4 is also the basis of the electron-doped cuprate superconductors [5] of the form La2-xCexCuO4+y [6,7] which however crystallize in the so called T-prime-structure, i.e. without apical oxygen above or below the copper ions of the CuO2-plane. It is well known that for La2-xCexCuO4+y the undoped T-prime-structure parent compound cannot be prepared due to the structural phase transition back into the T-structure occuring around x ~ 0.05. Here, we report that if La is substituted by RE = Y, Lu, Sm, Eu, Gd, or Tb, which have smaller ionic radii but have the same valence as La, nominally undoped La2-xRExCuO4 can be synthesized by molecular beam epitaxy in the T-prime-structure. The second important result is that all these new T-prime-compounds are superconductors with fairly high critical temperatures up to 21 K. For this new class of cuprates La2-xRExCuO4, which forms the T-prime-parent compounds of the La-based electron doped cuprates, we have not been able to obtain the Mott-insulating ground state for small x before the structural phase transition into the T-structure takes place.
△ Less
Submitted 24 January, 2005;
originally announced January 2005.
-
New superconduting cuprates with no effective do**: T'-(La3+)2-x(RE3+)xCuO4
Authors:
A. Tsukada,
Y. Krockenberger,
H. Yamamoto,
M. Naito
Abstract:
We report the synthesis of new superconducting cuprates T'-La2-xRExCuO4 (RE = Sm, Eu, Tb, Lu, and Y) using molecular beam epitaxy. The new superconductors have no effective dopant, at least nominally. The substitution of isovalent RE for La was essentially performed to stabilize the T' phase of La2CuO4 instead of the T phase. The maximum Tconset is ~ 25 K and Tczero is ~ 21 K. The keys to our di…
▽ More
We report the synthesis of new superconducting cuprates T'-La2-xRExCuO4 (RE = Sm, Eu, Tb, Lu, and Y) using molecular beam epitaxy. The new superconductors have no effective dopant, at least nominally. The substitution of isovalent RE for La was essentially performed to stabilize the T' phase of La2CuO4 instead of the T phase. The maximum Tconset is ~ 25 K and Tczero is ~ 21 K. The keys to our discovery are (1) the preparation of high-crystalline-quality La-based T' films by low-temperature (~ 650C) thin film processes, and (2) more thorough removal of impurity oxygen at the apical site, which is achieved by the larger in-plane lattice constant (a0) of T'-La2-xRExCuO4 than other T'-Ln2CuO4 (Ln = Pr, Nd, Sm, Eu, Gd) with the aid of large surface-to-volume ratio of thin films.
△ Less
Submitted 8 January, 2004;
originally announced January 2004.
-
New superconducting T'-(La3+)2-x(RE3+)xCuO4 with isovalent do** (RE = Sm, Eu, Tb, Lu, and Y)
Authors:
A. Tsukada,
Y. Krockenberger,
H. Yamamoto,
M. Naito
Abstract:
We report the synthesis of new superconducting cuprates T'-La2-xRExCuO4 (RE = Sm, Eu, Tb, Lu, and Y) using molecular beam epitaxy. The new superconductors have no effective dopant, at least nominally. The substitution of isovalent RE for La was essentially performed to stabilize the T' phase of La2CuO4 instead of the T phase. The maximum Tconset is ~ 25 K and Tczero is ~ 21 K. The keys to our di…
▽ More
We report the synthesis of new superconducting cuprates T'-La2-xRExCuO4 (RE = Sm, Eu, Tb, Lu, and Y) using molecular beam epitaxy. The new superconductors have no effective dopant, at least nominally. The substitution of isovalent RE for La was essentially performed to stabilize the T' phase of La2CuO4 instead of the T phase. The maximum Tconset is ~ 25 K and Tczero is ~ 21 K. The keys to our discovery are (1) the preparation of high-crystalline-quality La-based T' films by low-temperature (~650C) thin film processes, and (2) more thorough removal of impurity oxygen at the apical site, which is achieved by the larger in-plane lattice constant (a0) of T'-La2-xRExCuO4 than other T'-Ln2CuO4 (Ln = Pr, Nd, Sm, Eu, Gd) with the aid of large surface-to-volume ratio of thin films. The photoemission spectra suggest that the end member compounds of the T' system may not be a Mott insulator.
△ Less
Submitted 17 November, 2003;
originally announced November 2003.