-
Fast Flux-Activated Leakage Reduction for Superconducting Quantum Circuits
Authors:
Nathan Lacroix,
Luca Hofele,
Ants Remm,
Othmane Benhayoune-Khadraoui,
Alexander McDonald,
Ross Shillito,
Stefania Lazar,
Christoph Hellings,
Francois Swiadek,
Dante Colao-Zanuz,
Alexander Flasby,
Mohsen Bahrami Panah,
Michael Kerschbaum,
Graham J. Norris,
Alexandre Blais,
Andreas Wallraff,
Sebastian Krinner
Abstract:
Quantum computers will require quantum error correction to reach the low error rates necessary for solving problems that surpass the capabilities of conventional computers. One of the dominant errors limiting the performance of quantum error correction codes across multiple technology platforms is leakage out of the computational subspace arising from the multi-level structure of qubit implementat…
▽ More
Quantum computers will require quantum error correction to reach the low error rates necessary for solving problems that surpass the capabilities of conventional computers. One of the dominant errors limiting the performance of quantum error correction codes across multiple technology platforms is leakage out of the computational subspace arising from the multi-level structure of qubit implementations. Here, we present a resource-efficient universal leakage reduction unit for superconducting qubits using parametric flux modulation. This operation removes leakage down to our measurement accuracy of $7\cdot 10^{-4}$ in approximately $50\, \mathrm{ns}$ with a low error of $2.5(1)\cdot 10^{-3}$ on the computational subspace, thereby reaching durations and fidelities comparable to those of single-qubit gates. We demonstrate that using the leakage reduction unit in repeated weight-two stabilizer measurements reduces the total number of detected errors in a scalable fashion to close to what can be achieved using leakage-rejection methods which do not scale. Our approach does neither require additional control electronics nor on-chip components and is applicable to both auxiliary and data qubits. These benefits make our method particularly attractive for mitigating leakage in large-scale quantum error correction circuits, a crucial requirement for the practical implementation of fault-tolerant quantum computation.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Enhancing Dispersive Readout of Superconducting Qubits Through Dynamic Control of the Dispersive Shift: Experiment and Theory
Authors:
François Swiadek,
Ross Shillito,
Paul Magnard,
Ants Remm,
Christoph Hellings,
Nathan Lacroix,
Quentin Ficheux,
Dante Colao Zanuz,
Graham J. Norris,
Alexandre Blais,
Sebastian Krinner,
Andreas Wallraff
Abstract:
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from mid-circuit, real-time, measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and perhaps most importantly, quantum error correction. A prominent and wide…
▽ More
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from mid-circuit, real-time, measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and perhaps most importantly, quantum error correction. A prominent and widely-used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only $0.25\,\%$ in 100 ns integration time. Maintaining low readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout mode linewidth, which we quantify by considering the hybridization of the readout-resonator and its dedicated Purcell-filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity, fast, mid-circuit measurements.
△ Less
Submitted 15 July, 2023;
originally announced July 2023.
-
Intermodulation Distortion in a Josephson Traveling Wave Parametric Amplifier
Authors:
Ants Remm,
Sebastian Krinner,
Nathan Lacroix,
Christoph Hellings,
Francois Swiadek,
Graham Norris,
Christopher Eichler,
Andreas Wallraff
Abstract:
Josephson traveling wave parametric amplifiers enable the amplification of weak microwave signals close to the quantum limit with large bandwidth, which has a broad range of applications in superconducting quantum computing and in the operation of single-photon detectors. While the large bandwidth allows for their use in frequency-multiplexed detection architectures, an increased number of readout…
▽ More
Josephson traveling wave parametric amplifiers enable the amplification of weak microwave signals close to the quantum limit with large bandwidth, which has a broad range of applications in superconducting quantum computing and in the operation of single-photon detectors. While the large bandwidth allows for their use in frequency-multiplexed detection architectures, an increased number of readout tones per amplifier puts more stringent requirements on the dynamic range to avoid saturation. Here, we characterize the undesired mixing processes between the different frequency-multiplexed tones applied to a Josephson traveling wave parametric amplifier, a phenomenon also known as intermodulation distortion. The effect becomes particularly significant when the amplifier is operated close to its saturation power. Furthermore, we demonstrate that intermodulation distortion can lead to significant crosstalk and reduction of fidelity for multiplexed readout of superconducting qubits. We suggest using large detunings between the pump and signal frequencies to mitigate crosstalk. Our work provides insights into the limitations of current Josephson traveling wave parametric amplifiers and highlights the importance of performing further research on these devices.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Magnetic imaging of superconducting qubit devices with scanning SQUID-on-tip
Authors:
E. Marchiori,
L. Ceccarelli,
N. Rossi,
G. Romagnoli,
J. Herrmann,
J. -C. Besse,
S. Krinner,
A. Wallraff,
M. Poggio
Abstract:
We use a scanning superconducting quantum interference device (SQUID) to image the magnetic flux produced by a superconducting device designed for quantum computing. The nanometer-scale SQUID-on-tip probe reveals the flow of superconducting current through the circuit as well as the locations of trapped magnetic flux. In particular, maps of current flowing out of a flux-control line in the vicinit…
▽ More
We use a scanning superconducting quantum interference device (SQUID) to image the magnetic flux produced by a superconducting device designed for quantum computing. The nanometer-scale SQUID-on-tip probe reveals the flow of superconducting current through the circuit as well as the locations of trapped magnetic flux. In particular, maps of current flowing out of a flux-control line in the vicinity of a qubit show how these elements are coupled, providing insight on how to optimize qubit control.
△ Less
Submitted 16 June, 2022;
originally announced June 2022.
-
Realizing Repeated Quantum Error Correction in a Distance-Three Surface Code
Authors:
Sebastian Krinner,
Nathan Lacroix,
Ants Remm,
Agustin Di Paolo,
Elie Genois,
Catherine Leroux,
Christoph Hellings,
Stefania Lazar,
Francois Swiadek,
Johannes Herrmann,
Graham J. Norris,
Christian Kraglund Andersen,
Markus Müller,
Alexandre Blais,
Christopher Eichler,
Andreas Wallraff
Abstract:
Quantum computers hold the promise of solving computational problems which are intractable using conventional methods. For fault-tolerant operation quantum computers must correct errors occurring due to unavoidable decoherence and limited control accuracy. Here, we demonstrate quantum error correction using the surface code, which is known for its exceptionally high tolerance to errors. Using 17 p…
▽ More
Quantum computers hold the promise of solving computational problems which are intractable using conventional methods. For fault-tolerant operation quantum computers must correct errors occurring due to unavoidable decoherence and limited control accuracy. Here, we demonstrate quantum error correction using the surface code, which is known for its exceptionally high tolerance to errors. Using 17 physical qubits in a superconducting circuit we encode quantum information in a distance-three logical qubit building up on recent distance-two error detection experiments. In an error correction cycle taking only $1.1\,μ$s, we demonstrate the preservation of four cardinal states of the logical qubit. Repeatedly executing the cycle, we measure and decode both bit- and phase-flip error syndromes using a minimum-weight perfect-matching algorithm in an error-model-free approach and apply corrections in postprocessing. We find a low error probability of $3\,\%$ per cycle when rejecting experimental runs in which leakage is detected. The measured characteristics of our device agree well with a numerical model. Our demonstration of repeated, fast and high-performance quantum error correction cycles, together with recent advances in ion traps, support our understanding that fault-tolerant quantum computation will be practically realizable.
△ Less
Submitted 7 December, 2021;
originally announced December 2021.
-
Realizing Quantum Convolutional Neural Networks on a Superconducting Quantum Processor to Recognize Quantum Phases
Authors:
Johannes Herrmann,
Sergi Masot Llima,
Ants Remm,
Petr Zapletal,
Nathan A. McMahon,
Colin Scarato,
Francois Swiadek,
Christian Kraglund Andersen,
Christoph Hellings,
Sebastian Krinner,
Nathan Lacroix,
Stefania Lazar,
Michael Kerschbaum,
Dante Colao Zanuz,
Graham J. Norris,
Michael J. Hartmann,
Andreas Wallraff,
Christopher Eichler
Abstract:
Quantum computing crucially relies on the ability to efficiently characterize the quantum states output by quantum hardware. Conventional methods which probe these states through direct measurements and classically computed correlations become computationally expensive when increasing the system size. Quantum neural networks tailored to recognize specific features of quantum states by combining un…
▽ More
Quantum computing crucially relies on the ability to efficiently characterize the quantum states output by quantum hardware. Conventional methods which probe these states through direct measurements and classically computed correlations become computationally expensive when increasing the system size. Quantum neural networks tailored to recognize specific features of quantum states by combining unitary operations, measurements and feedforward promise to require fewer measurements and to tolerate errors. Here, we realize a quantum convolutional neural network (QCNN) on a 7-qubit superconducting quantum processor to identify symmetry-protected topological (SPT) phases of a spin model characterized by a non-zero string order parameter. We benchmark the performance of the QCNN based on approximate ground states of a family of cluster-Ising Hamiltonians which we prepare using a hardware-efficient, low-depth state preparation circuit. We find that, despite being composed of finite-fidelity gates itself, the QCNN recognizes the topological phase with higher fidelity than direct measurements of the string order parameter for the prepared states.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
Demonstration of an All-Microwave Controlled-Phase Gate between Far Detuned Qubits
Authors:
S. Krinner,
P. Kurpiers,
B. Royer,
P. Magnard,
I. Tsitsilin,
J. -C. Besse,
A. Remm,
A. Blais,
A. Wallraff
Abstract:
A challenge in building large-scale superconducting quantum processors is to find the right balance between coherence, qubit addressability, qubit-qubit coupling strength, circuit complexity and the number of required control lines. Leading all-microwave approaches for coupling two qubits require comparatively few control lines and benefit from high coherence but suffer from frequency crowding and…
▽ More
A challenge in building large-scale superconducting quantum processors is to find the right balance between coherence, qubit addressability, qubit-qubit coupling strength, circuit complexity and the number of required control lines. Leading all-microwave approaches for coupling two qubits require comparatively few control lines and benefit from high coherence but suffer from frequency crowding and limited addressability in multi-qubit settings. Here, we overcome these limitations by realizing an all-microwave controlled-phase gate between two transversely coupled transmon qubits which are far detuned compared to the qubit anharmonicity. The gate is activated by applying a single, strong microwave tone to one of the qubits, inducing a coupling between the two-qubit $|f,g\rangle$ and $|g,e\rangle$ states, with $|g\rangle$, $|e\rangle$, and $|f\rangle$ denoting the lowest energy states of a transmon qubit. Interleaved randomized benchmarking yields a gate fidelity of $97.5\pm 0.3 \%$ at a gate duration of $126\,\rm{ns}$, with the dominant error source being decoherence. We model the gate in presence of the strong drive field using Floquet theory and find good agreement with our data. Our gate constitutes a promising alternative to present two-qubit gates and could have hardware scaling advantages in large-scale quantum processors as it neither requires additional drive lines nor tunable couplers.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Benchmarking Coherent Errors in Controlled-Phase Gates due to Spectator Qubits
Authors:
S. Krinner,
S. Lazar,
A. Remm,
C. K. Andersen,
N. Lacroix,
G. J. Norris,
C. Hellings,
M. Gabureac,
C. Eichler,
A. Wallraff
Abstract:
A major challenge in operating multi-qubit quantum processors is to mitigate multi-qubit coherent errors. For superconducting circuits, besides crosstalk originating from imperfect isolation of control lines, dispersive coupling between qubits is a major source of multi-qubit coherent errors. We benchmark phase errors in a controlled-phase gate due to dispersive coupling of either of the qubits in…
▽ More
A major challenge in operating multi-qubit quantum processors is to mitigate multi-qubit coherent errors. For superconducting circuits, besides crosstalk originating from imperfect isolation of control lines, dispersive coupling between qubits is a major source of multi-qubit coherent errors. We benchmark phase errors in a controlled-phase gate due to dispersive coupling of either of the qubits involved in the gate to one or more spectator qubits. We measure the associated gate infidelity using quantum process tomography. In addition, we point out that, due to coupling of the gate qubits to a non-computational state during the gate, two-qubit conditional phase errors are enhanced. Our work is important for understanding limits to the fidelity of two-qubit gates with finite on/off ratio in multi-qubit settings.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
Improving the Performance of Deep Quantum Optimization Algorithms with Continuous Gate Sets
Authors:
Nathan Lacroix,
Christoph Hellings,
Christian Kraglund Andersen,
Agustin Di Paolo,
Ants Remm,
Stefania Lazar,
Sebastian Krinner,
Graham J. Norris,
Mihai Gabureac,
Alexandre Blais,
Christopher Eichler,
Andreas Wallraff
Abstract:
Variational quantum algorithms are believed to be promising for solving computationally hard problems and are often comprised of repeated layers of quantum gates. An example thereof is the quantum approximate optimization algorithm (QAOA), an approach to solve combinatorial optimization problems on noisy intermediate-scale quantum (NISQ) systems. Gaining computational power from QAOA critically re…
▽ More
Variational quantum algorithms are believed to be promising for solving computationally hard problems and are often comprised of repeated layers of quantum gates. An example thereof is the quantum approximate optimization algorithm (QAOA), an approach to solve combinatorial optimization problems on noisy intermediate-scale quantum (NISQ) systems. Gaining computational power from QAOA critically relies on the mitigation of errors during the execution of the algorithm, which for coherence-limited operations is achievable by reducing the gate count. Here, we demonstrate an improvement of up to a factor of 3 in algorithmic performance as measured by the success probability, by implementing a continuous hardware-efficient gate set using superconducting quantum circuits. This gate set allows us to perform the phase separation step in QAOA with a single physical gate for each pair of qubits instead of decomposing it into two C$Z$-gates and single-qubit gates. With this reduced number of physical gates, which scales with the number of layers employed in the algorithm, we experimentally investigate the circuit-depth-dependent performance of QAOA applied to exact-cover problem instances mapped onto three and seven qubits, using up to a total of 399 operations and up to 9 layers. Our results demonstrate that the use of continuous gate sets may be a key component in extending the impact of near-term quantum computers.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Repeated Quantum Error Detection in a Surface Code
Authors:
Christian Kraglund Andersen,
Ants Remm,
Stefania Lazar,
Sebastian Krinner,
Nathan Lacroix,
Graham J. Norris,
Mihai Gabureac,
Christopher Eichler,
Andreas Wallraff
Abstract:
The realization of quantum error correction is an essential ingredient for reaching the full potential of fault-tolerant universal quantum computation. Using a range of different schemes, logical qubits can be redundantly encoded in a set of physical qubits. One such scalable approach is based on the surface code. Here we experimentally implement its smallest viable instance, capable of repeatedly…
▽ More
The realization of quantum error correction is an essential ingredient for reaching the full potential of fault-tolerant universal quantum computation. Using a range of different schemes, logical qubits can be redundantly encoded in a set of physical qubits. One such scalable approach is based on the surface code. Here we experimentally implement its smallest viable instance, capable of repeatedly detecting any single error using seven superconducting qubits, four data qubits and three ancilla qubits. Using high-fidelity ancilla-based stabilizer measurements we initialize the cardinal states of the encoded logical qubit with an average logical fidelity of 96.1%. We then repeatedly check for errors using the stabilizer readout and observe that the logical quantum state is preserved with a lifetime and coherence time longer than those of any of the constituent qubits when no errors are detected. Our demonstration of error detection with its resulting enhancement of the conditioned logical qubit coherence times in a 7-qubit surface code is an important step indicating a promising route towards the realization of quantum error correction in the surface code.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Entanglement Stabilization using Parity Detection and Real-Time Feedback in Superconducting Circuits
Authors:
Christian Kraglund Andersen,
Ants Remm,
Stefania Balasiu,
Sebastian Krinner,
Johannes Heinsoo,
Jean-Claude Besse,
Mihai Gabureac,
Andreas Wallraff,
Christopher Eichler
Abstract:
Fault tolerant quantum computing relies on the ability to detect and correct errors, which in quantum error correction codes is typically achieved by projectively measuring multi-qubit parity operators and by conditioning operations on the observed error syndromes. Here, we experimentally demonstrate the use of an ancillary qubit to repeatedly measure the $ZZ$ and $XX$ parity operators of two data…
▽ More
Fault tolerant quantum computing relies on the ability to detect and correct errors, which in quantum error correction codes is typically achieved by projectively measuring multi-qubit parity operators and by conditioning operations on the observed error syndromes. Here, we experimentally demonstrate the use of an ancillary qubit to repeatedly measure the $ZZ$ and $XX$ parity operators of two data qubits and to thereby project their joint state into the respective parity subspaces. By applying feedback operations conditioned on the outcomes of individual parity measurements, we demonstrate the real-time stabilization of a Bell state with a fidelity of $F\approx 74\%$ in up to 12 cycles of the feedback loop. We also perform the protocol using Pauli frame updating and, in contrast to the case of real-time stabilization, observe a steady decrease in fidelity from cycle to cycle. The ability to stabilize parity over multiple feedback rounds with no reduction in fidelity provides strong evidence for the feasibility of executing stabilizer codes on timescales much longer than the intrinsic coherence times of the constituent qubits.
△ Less
Submitted 20 February, 2019; v1 submitted 19 February, 2019;
originally announced February 2019.
-
Engineering cryogenic setups for 100-qubit scale superconducting circuit systems
Authors:
Sebastian Krinner,
Simon Storz,
Philipp Kurpiers,
Paul Magnard,
Johannes Heinsoo,
Raphael Keller,
Janis Luetolf,
Christopher Eichler,
Andreas Wallraff
Abstract:
A robust cryogenic infrastructure in form of a wired, thermally optimized dilution refrigerator is essential for present and future solid-state based quantum processors. Here, we engineer an extensible cryogenic setup, which minimizes passive and active heat loads, while guaranteeing rapid qubit control and readout. We review design criteria for qubit drive lines, flux lines, and output lines used…
▽ More
A robust cryogenic infrastructure in form of a wired, thermally optimized dilution refrigerator is essential for present and future solid-state based quantum processors. Here, we engineer an extensible cryogenic setup, which minimizes passive and active heat loads, while guaranteeing rapid qubit control and readout. We review design criteria for qubit drive lines, flux lines, and output lines used in typical experiments with superconducting circuits and describe each type of line in detail. The passive heat load of stainless steel and NbTi coaxial cables and the active load due to signal dissipation are measured, validating our robust and extensible concept for thermal anchoring of attenuators, cables, and other microwave components. Our results are important for managing the heat budget of future large-scale quantum computers based on superconducting circuits.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Challenging local realism with human choices
Authors:
The BIG Bell Test Collaboration,
C. Abellán,
A. Acín,
A. Alarcón,
O. Alibart,
C. K. Andersen,
F. Andreoli,
A. Beckert,
F. A. Beduini,
A. Bendersky,
M. Bentivegna,
P. Bierhorst,
D. Burchardt,
A. Cabello,
J. Cariñe,
S. Carrasco,
G. Carvacho,
D. Cavalcanti,
R. Chaves,
J. Cortés-Vega,
A. Cuevas,
A. Delgado,
H. de Riedmatten,
C. Eichler,
P. Farrera
, et al. (83 additional authors not shown)
Abstract:
A Bell test is a randomized trial that compares experimental observations against the philosophical worldview of local realism. A Bell test requires spatially distributed entanglement, fast and high-efficiency detection and unpredictable measurement settings. Although technology can satisfy the first two of these requirements, the use of physical devices to choose settings in a Bell test involves…
▽ More
A Bell test is a randomized trial that compares experimental observations against the philosophical worldview of local realism. A Bell test requires spatially distributed entanglement, fast and high-efficiency detection and unpredictable measurement settings. Although technology can satisfy the first two of these requirements, the use of physical devices to choose settings in a Bell test involves making assumptions about the physics that one aims to test. Bell himself noted this weakness in using physical setting choices and argued that human `free will' could be used rigorously to ensure unpredictability in Bell tests. Here we report a set of local-realism tests using human choices, which avoids assumptions about predictability in physics. We recruited about 100,000 human participants to play an online video game that incentivizes fast, sustained input of unpredictable selections and illustrates Bell-test methodology. The participants generated 97,347,490 binary choices, which were directed via a scalable web platform to 12 laboratories on five continents, where 13 experiments tested local realism using photons, single atoms, atomic ensembles, and superconducting devices. Over a 12-hour period on 30 November 2016, participants worldwide provided a sustained data flow of over 1,000 bits per second to the experiments, which used different human-generated data to choose each measurement setting. The observed correlations strongly contradict local realism and other realistic positions in bipartite and tripartite scenarios. Project outcomes include closing the `freedom-of-choice loophole' (the possibility that the setting choices are influenced by `hidden variables' to correlate with the particle properties), the utilization of video-game methods for rapid collection of human generated randomness, and the use of networking techniques for global participation in experimental science.
△ Less
Submitted 9 November, 2018; v1 submitted 11 May, 2018;
originally announced May 2018.
-
Rapid high-fidelity multiplexed readout of superconducting qubits
Authors:
Johannes Heinsoo,
Christian Kraglund Andersen,
Ants Remm,
Sebastian Krinner,
Theodore Walter,
Yves Salathé,
Simone Gasparinetti,
Jean-Claude Besse,
Anton Potočnik,
Christopher Eichler,
Andreas Wallraff
Abstract:
The duration and fidelity of qubit readout is a critical factor for applications in quantum information processing as it limits the fidelity of algorithms which reuse qubits after measurement or apply feedback based on the measurement result. Here we present fast multiplexed readout of five qubits in a single 1.2 GHz wide readout channel. Using a readout pulse length of 80 ns and populating readou…
▽ More
The duration and fidelity of qubit readout is a critical factor for applications in quantum information processing as it limits the fidelity of algorithms which reuse qubits after measurement or apply feedback based on the measurement result. Here we present fast multiplexed readout of five qubits in a single 1.2 GHz wide readout channel. Using a readout pulse length of 80 ns and populating readout resonators for less than 250 ns we find an average correct assignment probability for the five measured qubits to be $97\%$. The differences between the individual readout errors and those found when measuring the qubits simultaneously are within $1\%$. We employ individual Purcell filters for each readout resonator to suppress off-resonant driving, which we characterize by the dephasing imposed on unintentionally measured qubits. We expect the here presented readout scheme to become particularly useful for the selective readout of individual qubits in multi-qubit quantum processors.
△ Less
Submitted 24 January, 2018;
originally announced January 2018.
-
Two-terminal transport measurements with cold atoms
Authors:
Sebastian Krinner,
Tilman Esslinger,
Jean-Philippe Brantut
Abstract:
In the last years, the ability of cold atoms experiments to explore condensed- matter related questions has dramatically progressed. Transport experiments, in particular, have expanded to the point that conductances and other transport coefficients can now be measured in a way directly analogous to solid state physics, extending cold atoms based quantum simulations into the domain of quantum elect…
▽ More
In the last years, the ability of cold atoms experiments to explore condensed- matter related questions has dramatically progressed. Transport experiments, in particular, have expanded to the point that conductances and other transport coefficients can now be measured in a way directly analogous to solid state physics, extending cold atoms based quantum simulations into the domain of quantum electronic devices. In this topical review, we describe the transport experiments performed with cold gases in the two terminals configuration, with an emphasis on the specific features of cold atomic gases compared to solid state physics. We present the experimental techniques and the main experimental findings, focusing on but not restricted to the recent experiments performed in our group. We eventually discuss the perspectives opened by this approach, the main technical and conceptual challenges for future developments, and the potential applications as a quantum simulator for transport phenomena and mesoscopic physics problems.
△ Less
Submitted 4 June, 2017;
originally announced June 2017.
-
A scanning gate microscope for cold atomic gases
Authors:
Samuel Häusler,
Shuta Nakajima,
Martin Lebrat,
Dominik Husmann,
Sebastian Krinner,
Tilman Esslinger,
Jean-Philippe Brantut
Abstract:
We present a scanning probe microscopy technique for spatially resolving transport in cold atomic gases, in close analogy with scanning gate microscopy in semiconductor physics. The conductance of a quantum point contact connected to two atomic reservoirs is measured in the presence of a tightly focused laser beam acting as a local perturbation that can be precisely positioned in space. By scannin…
▽ More
We present a scanning probe microscopy technique for spatially resolving transport in cold atomic gases, in close analogy with scanning gate microscopy in semiconductor physics. The conductance of a quantum point contact connected to two atomic reservoirs is measured in the presence of a tightly focused laser beam acting as a local perturbation that can be precisely positioned in space. By scanning its position and recording the subsequent variations of conductance, we retrieve a high-resolution map of transport through a quantum point contact. We demonstrate a spatial resolution comparable to the extent of the transverse wave function of the atoms inside the channel, and a position sensitivity below 10nm. Our measurements agree well with an analytical model and ab-initio numerical simulations, allowing us to identify a regime in transport where tunneling dominates over thermal effects. Our technique opens new perspectives for the high-resolution observation and manipulation of cold atomic gases.
△ Less
Submitted 7 February, 2017;
originally announced February 2017.
-
Map** out spin and particle conductances in a quantum point contact
Authors:
Sebastian Krinner,
Martin Lebrat,
Dominik Husmann,
Charles Grenier,
Jean-Philippe Brantut,
Tilman Esslinger
Abstract:
We study particle and spin transport in a single mode quantum point contact using a charge neutral, quantum degenerate Fermi gas with tunable, attractive interactions. This yields the spin and particle conductance of the point contact as a function of chemical potential or confinement. The measurements cover a regime from weak attraction, where quantized conductance is observed, to the resonantly…
▽ More
We study particle and spin transport in a single mode quantum point contact using a charge neutral, quantum degenerate Fermi gas with tunable, attractive interactions. This yields the spin and particle conductance of the point contact as a function of chemical potential or confinement. The measurements cover a regime from weak attraction, where quantized conductance is observed, to the resonantly interacting superfluid. Spin conductance exhibits a broad maximum when varying the chemical potential at moderate interactions, which signals the emergence of Cooper pairing. In contrast, the particle conductance is unexpectedly enhanced even before the gas is expected to turn into a superfluid, continuously rising from the plateau at 1/h for weak interactions to plateaux-like features at non-universal values as high as 4/h for intermediate interactions. For strong interactions, the particle conductance plateaux disappear and the spin conductance gets suppressed, confirming the spin-insulating character of a superfluid. Our observations document the breakdown of universal conductance quantization as many-body correlations appear. The observed anomalous quantization challenges a Fermi liquid description of the normal phase, shedding new light on the nature of the strongly attractive Fermi gases.
△ Less
Submitted 26 May, 2016; v1 submitted 18 November, 2015;
originally announced November 2015.
-
Connecting strongly correlated superfluids by a quantum point contact
Authors:
Dominik Husmann,
Shun Uchino,
Sebastian Krinner,
Martin Lebrat,
Thierry Giamarchi,
Tilman Esslinger,
Jean-Philippe Brantut
Abstract:
Point contacts provide simple connections between macroscopic particle reservoirs. In electric circuits, strong links between metals, semiconductors or superconductors have applications for fundamental condensed-matter physics as well as quantum information processing. However for complex, strongly correlated materials, links have been largely restricted to weak tunnel junctions. Here we study res…
▽ More
Point contacts provide simple connections between macroscopic particle reservoirs. In electric circuits, strong links between metals, semiconductors or superconductors have applications for fundamental condensed-matter physics as well as quantum information processing. However for complex, strongly correlated materials, links have been largely restricted to weak tunnel junctions. Here we study resonantly interacting Fermi gases connected by a tunable, ballistic quantum point contact, finding a non-linear current-bias relation. At low temperature, our observations agree quantitatively with a theoretical model in which the current originates from multiple Andreev reflections. In a wide contact geometry, the competition between superfluidity and thermally activated transport leads to a conductance minimum. Our system offers a controllable platform for the study of mesoscopic devices based on strongly interacting matter.
△ Less
Submitted 3 August, 2015;
originally announced August 2015.
-
Observation of Quantized Conductance in Neutral Matter
Authors:
Sebastian Krinner,
David Stadler,
Dominik Husmann,
Jean-Philippe Brantut,
Tilman Esslinger
Abstract:
In transport experiments the quantum nature of matter becomes directly evident when changes in conductance occur only in discrete steps, with a size determined solely by Planck's constant h. The observations of quantized steps in the electric conductance have provided important insights into the physics of mesoscopic systems and allowed for the development of quantum electronic devices. Even thoug…
▽ More
In transport experiments the quantum nature of matter becomes directly evident when changes in conductance occur only in discrete steps, with a size determined solely by Planck's constant h. The observations of quantized steps in the electric conductance have provided important insights into the physics of mesoscopic systems and allowed for the development of quantum electronic devices. Even though quantized conductance should not rely on the presence of electric charges, it has never been observed for neutral, massive particles. In its most fundamental form, the phenomenon requires a quantum degenerate Fermi gas, a ballistic and adiabatic transport channel, and a constriction with dimensions comparable to the Fermi wavelength. Here we report on the observation of quantized conductance in the transport of neutral atoms. We employ high resolution lithography to shape light potentials that realize either a quantum point contact or a quantum wire for atoms. These constrictions are imprinted on a quasi two-dimensional ballistic channel connecting two adjustable reservoirs of quantum degenerate fermionic lithium atoms. By tuning either a gate potential or the transverse confinement of the constrictions, we observe distinct plateaus in the conductance for atoms. The conductance in the first plateau is found to be equal to 1/h, the universal conductance quantum. For low gate potentials we find good agreement between the experimental data and the Landauer formula, with all parameters determined a priori. Our experiment constitutes the cold atom version of a mesoscopic device and can be readily extended to more complex geometries and interacting quantum gases.
△ Less
Submitted 25 April, 2014;
originally announced April 2014.
-
Direct Observation of Fragmentation in a Disordered, Strongly Interacting Fermi Gas
Authors:
Sebastian Krinner,
David Stadler,
Jakob Meineke,
Jean-Philippe Brantut,
Tilman Esslinger
Abstract:
Describing the behaviour of strongly interacting particles in the presence of disorder is among the most challenging problems in quantum many-body physics. The controlled setting of cold atom experiments provides a new avenue to address these challenges [1], complementing studies in solid state physics, where a number of puzzling findings have emerged in experiments using superconducting thin film…
▽ More
Describing the behaviour of strongly interacting particles in the presence of disorder is among the most challenging problems in quantum many-body physics. The controlled setting of cold atom experiments provides a new avenue to address these challenges [1], complementing studies in solid state physics, where a number of puzzling findings have emerged in experiments using superconducting thin films [2,3]. Here we investigate a strongly interacting thin film of an atomic Fermi gas subject to a random potential. We use high-resolution in-situ imaging [4-7] to resolve the atomic density at the length scale of a single impurity, which would require scanning probe techniques in solid state physics [8]. This allows us to directly observe the fragmentation of the density profile and to extract its percolation properties. Transport measurements in a two-terminal configuration indicate that the fragmentation process is accompanied by a breakdown of superfluidity. Our results suggest that percolation of paired atoms is responsible for the loss of superfluidity, and that disorder is able to increase the binding energy of pairs.
△ Less
Submitted 20 November, 2013;
originally announced November 2013.
-
A thermoelectric heat engine with ultracold atoms
Authors:
Jean-Philippe Brantut,
Charles Grenier,
Jakob Meineke,
David Stadler,
Sebastian Krinner,
Corinna Kollath,
Tilman Esslinger,
Antoine Georges
Abstract:
Thermoelectric effects, such as the generation of a particle current by a temperature gradient, have their origin in a reversible coupling between heat and particle flows. These effects are fundamental probes for materials and have applications to cooling and power generation. Here we demonstrate thermoelectricity in a fermionic cold atoms channel, ballistic or diffusive, connected to two reservoi…
▽ More
Thermoelectric effects, such as the generation of a particle current by a temperature gradient, have their origin in a reversible coupling between heat and particle flows. These effects are fundamental probes for materials and have applications to cooling and power generation. Here we demonstrate thermoelectricity in a fermionic cold atoms channel, ballistic or diffusive, connected to two reservoirs. We show that the magnitude of the effect and the efficiency of energy conversion can be optimized by controlling the geometry or disorder strength. Our observations are in quantitative agreement with a theoretical model based on the Landauer-Bu ttiker formalism. Our device provides a controllable model-system to explore mechanisms of energy conversion and realizes a cold atom based heat engine.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Superfluidity with disorder in a quantum gas thin film
Authors:
Sebastian Krinner,
David Stadler,
Jakob Meineke,
Jean-Philippe Brantut,
Tilman Esslinger
Abstract:
We investigate the properties of a strongly interacting, superfluid gas of 6Li2 Feshbach molecules forming a thin film confined in a quasi two-dimensional channel with a tunable random potential, creating a microscopic disorder. We measure the atomic current and extract the resistance of the film in a two-terminal configuration, and identify a superfluid state at low disorder strength, which evolv…
▽ More
We investigate the properties of a strongly interacting, superfluid gas of 6Li2 Feshbach molecules forming a thin film confined in a quasi two-dimensional channel with a tunable random potential, creating a microscopic disorder. We measure the atomic current and extract the resistance of the film in a two-terminal configuration, and identify a superfluid state at low disorder strength, which evolves into a normal, poorly conducting state for strong disorder. The transition takes place when the chemical potential reaches the percolation threshold of the disorder. The evolution of the conduction properties contrasts with the smooth behavior of the density and compressibility across the transition, measured in-situ at equilibrium. These features suggest the emergence of a glass-like phase at strong disorder.
△ Less
Submitted 30 November, 2012;
originally announced November 2012.
-
Observing the Drop of Resistance in the Flow of a Superfluid Fermi Gas
Authors:
David Stadler,
Sebastian Krinner,
Jakob Meineke,
Jean-Philippe Brantut,
Tilman Esslinger
Abstract:
In this work, we investigate the conduction properties of strongly interacting fermions flowing through a quasi two-dimensional, multimode channel, which connects two atomic reservoirs. The atomic current in the channel is controlled using a repulsive potential created by an off-resonant laser beam. In analogy with an electronic field-effect transistor, this gate potential controls the chemical po…
▽ More
In this work, we investigate the conduction properties of strongly interacting fermions flowing through a quasi two-dimensional, multimode channel, which connects two atomic reservoirs. The atomic current in the channel is controlled using a repulsive potential created by an off-resonant laser beam. In analogy with an electronic field-effect transistor, this gate potential controls the chemical potential in the channel while kee** the temperature imposed by the reservoirs unchanged. With the gate potential as a control parameter, we measure the current through the channel over a large dynamic range and determine the density distribution in the channel region. This allows us to observe the onset of superfluid flow of strongly interacting fermions. These measurements are compared to the case of a weakly interacting Fermi gas.
△ Less
Submitted 4 October, 2012;
originally announced October 2012.
-
Conduction of Ultracold Fermions Through a Mesoscopic Channel
Authors:
Jean-Philippe Brantut,
Jakob Meineke,
David Stadler,
Sebastian Krinner,
Tilman Esslinger
Abstract:
In a mesoscopic conductor electric resistance is detected even if the device is defect-free. We engineer and study a cold-atom analog of a mesoscopic conductor. It consists of a narrow channel connecting two macroscopic reservoirs of fermions that can be switched from ballistic to diffusive. We induce a current through the channel and find ohmic conduction, even for a ballistic channel. An analysi…
▽ More
In a mesoscopic conductor electric resistance is detected even if the device is defect-free. We engineer and study a cold-atom analog of a mesoscopic conductor. It consists of a narrow channel connecting two macroscopic reservoirs of fermions that can be switched from ballistic to diffusive. We induce a current through the channel and find ohmic conduction, even for a ballistic channel. An analysis of in-situ density distributions shows that in the ballistic case the chemical potential drop occurs at the entrance and exit of the channel, revealing the presence of contact resistance. In contrast, a diffusive channel with disorder displays a chemical potential drop spread over the whole channel. Our approach opens the way towards quantum simulation of mesoscopic devices with quantum gases.
△ Less
Submitted 10 April, 2012; v1 submitted 8 March, 2012;
originally announced March 2012.