-
The development of HISPEC for Keck and MODHIS for TMT: science cases and predicted sensitivities
Authors:
Quinn M. Konopacky,
Ashley D. Baker,
Dimitri Mawet,
Michael P. Fitzgerald,
Nemanja Jovanovic,
Charles Beichman,
Garreth Ruane,
Rob Bertz,
Hiroshi Terada,
Richard Dekany,
Larry Lingvay,
Marc Kassis,
David Anderson,
Motohide Tamura,
Bjorn Benneke,
Thomas Beatty,
Tuan Do,
Shogo Nishiyama,
Peter Plavchan,
Jason Wang,
Ji Wang,
Adam Burgasser,
Jean-Baptiste Ruffio,
Huihao Zhang,
Aaron Brown
, et al. (50 additional authors not shown)
Abstract:
HISPEC is a new, high-resolution near-infrared spectrograph being designed for the W.M. Keck II telescope. By offering single-shot, R=100,000 between 0.98 - 2.5 um, HISPEC will enable spectroscopy of transiting and non-transiting exoplanets in close orbits, direct high-contrast detection and spectroscopy of spatially separated substellar companions, and exoplanet dynamical mass and orbit measureme…
▽ More
HISPEC is a new, high-resolution near-infrared spectrograph being designed for the W.M. Keck II telescope. By offering single-shot, R=100,000 between 0.98 - 2.5 um, HISPEC will enable spectroscopy of transiting and non-transiting exoplanets in close orbits, direct high-contrast detection and spectroscopy of spatially separated substellar companions, and exoplanet dynamical mass and orbit measurements using precision radial velocity monitoring calibrated with a suite of state-of-the-art absolute and relative wavelength references. MODHIS is the counterpart to HISPEC for the Thirty Meter Telescope and is being developed in parallel with similar scientific goals. In this proceeding, we provide a brief overview of the current design of both instruments, and the requirements for the two spectrographs as guided by the scientific goals for each. We then outline the current science case for HISPEC and MODHIS, with focuses on the science enabled for exoplanet discovery and characterization. We also provide updated sensitivity curves for both instruments, in terms of both signal-to-noise ratio and predicted radial velocity precision.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Liger at Keck Observatory: Imager Detector and IFS Pick-off Mirror Assembly
Authors:
Maren Cosens,
Shelley A. Wright,
Aaron Brown,
Michael Fitzgerald,
Chris Johnson,
Tucker Jones,
Marc Kassis,
Evan Kress,
Renate Kupke,
James E. Larkin,
Kenneth Magnone,
Rosalie McGurk,
Nils-Erik Rundquist,
Ji Man Sohn,
Eric Wang,
James Wiley,
Sherry Yeh
Abstract:
Liger is a next-generation near-infrared imager and integral field spectrograph (IFS) planned for the W.M. Keck Observatory. Liger is designed to take advantage of improved adaptive optics (AO) from the Keck All-Sky Precision Adaptive Optics (KAPA) upgrade currently underway. Liger operates at 0.84-2.45 $μ$m with spectral resolving powers of R$\sim$4,000-10,000. Liger makes use of a sequential ima…
▽ More
Liger is a next-generation near-infrared imager and integral field spectrograph (IFS) planned for the W.M. Keck Observatory. Liger is designed to take advantage of improved adaptive optics (AO) from the Keck All-Sky Precision Adaptive Optics (KAPA) upgrade currently underway. Liger operates at 0.84-2.45 $μ$m with spectral resolving powers of R$\sim$4,000-10,000. Liger makes use of a sequential imager and spectrograph design allowing for simultaneous observations. There are two spectrograph modes: a lenslet with high spatial sampling of 14 and 31 mas, and a slicer with 75 and 150 mas sampling with an expanded field of view. Two pick-off mirrors near the imager detector direct light to these two IFS channels. We present the design and structural analysis for the imager detector and IFS pick-off mirror mounting assembly that will be used to align and maintain stability throughout its operation. A piezoelectric actuator will be used to step through $\rm3\,mm$ of travel during alignment of the instrument to determine the optimal focus for both the detector and pick-off mirrors which will be locked in place during normal operation. We will demonstrate that the design can withstand the required gravitational and ship** loads and can be aligned within the positioning tolerances for the optics.
△ Less
Submitted 16 August, 2022;
originally announced August 2022.
-
Liger at Keck Observatory: Design of Imager Optical Assembly and Spectrograph Re-Imaging Optics
Authors:
James Wiley,
Aaron Brown,
Renate Kupke,
Maren Cosens,
Shelley A. Wright,
Michael Fitzgerald,
Chris Johnson,
Tucker Jones,
Marc Kassis,
Evan Kress,
James E. Larkin,
Kenneth Magnone,
Rosalie McGurk,
Nils Rundquist,
Eric Wang,
Sherry Yeh
Abstract:
Liger is an adaptive optics (AO) fed imager and integral field spectrograph (IFS) designed to take advantage of the Keck All-sky Precision Adaptive-optics (KAPA) upgrade for the W.M. Keck Observatory. We present the design and analysis of the imager optical assembly including the spectrograph Re-Imaging Optics (RIO) which transfers the beam path from the imager focal plane to the IFS slicer module…
▽ More
Liger is an adaptive optics (AO) fed imager and integral field spectrograph (IFS) designed to take advantage of the Keck All-sky Precision Adaptive-optics (KAPA) upgrade for the W.M. Keck Observatory. We present the design and analysis of the imager optical assembly including the spectrograph Re-Imaging Optics (RIO) which transfers the beam path from the imager focal plane to the IFS slicer module and lenslet array. Each imager component and the first two RIO mechanisms are assembled and individually aligned on the same optical plate. Baffling suppresses background radiation and scattered light, and a pupil viewing camera allows the imager detector to focus on an image of the telescope pupil. The optical plate mounts on an adapter frame for alignment of the overall system. The imager and RIO will be characterized in a cryogenic test chamber before installation in the final science cryostat.
△ Less
Submitted 16 August, 2022;
originally announced August 2022.
-
GNOME and LBM Model Evaluation on Ocean Oil Spill Far-Field Impacts to Highly Sensitive Areas
Authors:
Zhanyang Zhang,
Tobias Schaefer,
Michael E. Kress
Abstract:
In case of an ocean oil spill, there are certain areas, e.g. shrimp farms, which are highly sensitive to small amounts of oil pollution while they are geographically far from the spill. We investigate the Lattice Boltzmann Method (LBM) and GNOME, a tool developed and used by NOAA, in terms of far-field impacts to sensitive areas. We present our simulation results of both models in limited scale (a…
▽ More
In case of an ocean oil spill, there are certain areas, e.g. shrimp farms, which are highly sensitive to small amounts of oil pollution while they are geographically far from the spill. We investigate the Lattice Boltzmann Method (LBM) and GNOME, a tool developed and used by NOAA, in terms of far-field impacts to sensitive areas. We present our simulation results of both models in limited scale (a sub area of Gulf of Mexico) under the same oil spill condition using real ocean current data from the Unified Wave Interface-Coupled Model (UWIN-CM). Our study shows that the kinetic theory based LBM model outperforms the stochastic particle based GNOME model in accuracy and computation time due to their fundamental difference in representation of oil pollution advection and diffusion mechanisms. We propose LBM as a viable alternative to the Lagrangian particle calculation component of GNOME in modeling the far-field impacts to highly sensitive areas.
△ Less
Submitted 11 May, 2021;
originally announced May 2021.
-
Liger for Next Generation Keck Adaptive Optics: Opto-Mechanical Dewar for Imaging Camera and Slicer
Authors:
James Wiley,
Kalp Mathur,
Aaron Brown,
Shelley A. Wright,
Maren Cosens,
Jerome Maire,
Michael Fitzgerald,
Tucker Jones,
Marc Kassis,
Evan Kress,
Renate Kupke,
James E. Larkin,
Jim Lyke,
Eric Wang,
Sherry Yeh
Abstract:
Liger is a next generation adaptive optics (AO) fed integral field spectrograph (IFS) and imager for the W. M. Keck Observatory. This new instrument is being designed to take advantage of the upgraded AO system provided by Keck All-Sky Precision Adaptive-optics (KAPA). Liger will provide higher spectral resolving power (R$\sim$4,000-10,000), wider wavelength coverage ($\sim$0.8-2.4 $μ$m), and larg…
▽ More
Liger is a next generation adaptive optics (AO) fed integral field spectrograph (IFS) and imager for the W. M. Keck Observatory. This new instrument is being designed to take advantage of the upgraded AO system provided by Keck All-Sky Precision Adaptive-optics (KAPA). Liger will provide higher spectral resolving power (R$\sim$4,000-10,000), wider wavelength coverage ($\sim$0.8-2.4 $μ$m), and larger fields of view than any current IFS. We present the design and analysis for a custom-made dewar chamber for characterizing the Liger opto-mechanical system. This dewar chamber is designed to test and assemble the Liger imaging camera and slicer IFS components while being adaptable for future experiments. The vacuum chamber will operate below $10^{-5}$ Torr with a cold shield that will be kept below 90 K. The dewar test chamber will be mounted to an optical vibration isolation platform and further isolated from the cryogenic and vacuum systems with bellows. The cold head and vacuums will be mounted to a custom cart that will also house the electronics and computer that interface with the experiment. This test chamber will provide an efficient means of calibrating and characterizing the Liger instrument and performing future experiments.
△ Less
Submitted 2 April, 2021;
originally announced April 2021.
-
Liger for Next Generation Keck AO: Filter Wheel and Pupil Design
Authors:
Maren Cosens,
Shelley A. Wright,
Pauline Arriaga,
Aaron Brown,
Michael Fitzgerald,
Tucker Jones,
Marc Kassis,
Evan Kress,
Renate Kupke,
James E. Larkin,
Jim Lyke,
Eric Wang,
James Wiley,
Sherry Yeh
Abstract:
Liger is a next-generation near-infrared imager and integral field spectrograph (IFS) for the W.M. Keck Observatory designed to take advantage of the Keck All-Sky Precision Adaptive Optics (KAPA) upgrade. Liger will operate at spectral resolving powers between R$\sim$4,000 - 10,000 over a wavelength range of 0.8-2.4$μ$m. Liger takes advantage of a sequential imager and spectrograph design that all…
▽ More
Liger is a next-generation near-infrared imager and integral field spectrograph (IFS) for the W.M. Keck Observatory designed to take advantage of the Keck All-Sky Precision Adaptive Optics (KAPA) upgrade. Liger will operate at spectral resolving powers between R$\sim$4,000 - 10,000 over a wavelength range of 0.8-2.4$μ$m. Liger takes advantage of a sequential imager and spectrograph design that allows for simultaneous observations between the two channels using the same filter wheel and cold pupil stop. We present the design for the filter wheels and pupil mask and their location and tolerances in the optical design. The filter mechanism is a multi-wheel design drawing from the heritage of the current Keck/OSIRIS imager single wheel design. The Liger multi-wheel configuration is designed to allow future upgrades to the number and range of filters throughout the life of the instrument. The pupil mechanism is designed to be similarly upgradeable with the option to add multiple pupil mask options. A smaller wheel mechanism allows the user to select the desired pupil mask with open slots being designed in for future upgrade capabilities. An ideal pupil would match the shape of the image formed of the primary and would track its rotation. For different pupil shapes without tracking we model the additional exposure time needed to achieve the same signal to noise of an ideal pupil and determine that a set of fixed masks of different shapes provides a mechanically simpler system with little compromise in performance.
△ Less
Submitted 2 April, 2021;
originally announced April 2021.
-
An overview of the NIRSPEC upgrade for the Keck II telescope
Authors:
Emily C. Martin,
Michael P. Fitzgerald,
Ian S. McLean,
Gregory Doppmann,
Marc Kassis,
Ted Aliado,
John Canfield,
Chris Johnson,
Evan Kress,
Kyle Lanclos,
Kenneth Magnone,
Ji Man Sohn,
Eric Wang,
Jason Weiss
Abstract:
NIRSPEC is a 1-5 micron echelle spectrograph in use on the Keck II Telescope since 1999. The spectrograph is capable of both moderate (R~2,000) and high (R~25,000) resolution observations and has been a workhorse instrument across many astronomical fields, from planetary science to extragalactic observations. In the latter half of 2018, we will upgrade NIRSPEC to improve the sensitivity and stabil…
▽ More
NIRSPEC is a 1-5 micron echelle spectrograph in use on the Keck II Telescope since 1999. The spectrograph is capable of both moderate (R~2,000) and high (R~25,000) resolution observations and has been a workhorse instrument across many astronomical fields, from planetary science to extragalactic observations. In the latter half of 2018, we will upgrade NIRSPEC to improve the sensitivity and stability of the instrument and increase its lifetime. The major components of the upgrade include replacing the spectrometer and slit-viewing camera detectors with Teledyne H2RG arrays and replacing all transputer-based electronics. We present detailed design, testing, and analysis of the upgraded instrument, including the finalized optomechanical design of the new 1-5 micron slit-viewing camera, final alignment and assembly of the science array, electronics systems, and updated software design.
△ Less
Submitted 17 August, 2018;
originally announced August 2018.
-
The Integral Field Spectrograph for the Gemini Planet Imager
Authors:
James E. Larkin,
Jeffrey K. Chilcote,
Theodore Aliado,
Brian J. Bauman,
George Brims,
John M. Canfield,
Andrew Cardwell,
Daren Dillon,
René Doyon,
Jennifer Dunn,
Michael P. Fitzgerald,
James R. Graham,
Stephen Goodsell,
Markus Hartung,
Pascale Hibon,
Patrick Ingraham,
Christopher A Johnson,
Evan Kress,
Quinn M. Konopacky,
Bruce A. Macintosh,
Kenneth G. Magnone,
Jérôme Maire,
Ian S. McLean,
David Palmer,
Marshall D. Perrin
, et al. (9 additional authors not shown)
Abstract:
The Gemini Planet Imager (GPI) is a complex optical system designed to directly detect the self-emission of young planets within two arcseconds of their host stars. After suppressing the starlight with an advanced AO system and apodized coronagraph, the dominant residual contamination in the focal plane are speckles from the atmosphere and optical surfaces. Since speckles are diffractive in nature…
▽ More
The Gemini Planet Imager (GPI) is a complex optical system designed to directly detect the self-emission of young planets within two arcseconds of their host stars. After suppressing the starlight with an advanced AO system and apodized coronagraph, the dominant residual contamination in the focal plane are speckles from the atmosphere and optical surfaces. Since speckles are diffractive in nature their positions in the field are strongly wavelength dependent, while an actual companion planet will remain at fixed separation. By comparing multiple images at different wavelengths taken simultaneously, we can freeze the speckle pattern and extract the planet light adding an order of magnitude of contrast. To achieve a bandpass of 20%, sufficient to perform speckle suppression, and to observe the entire two arcsecond field of view at diffraction limited sampling, we designed and built an integral field spectrograph with extremely low wavefront error and almost no chromatic aberration. The spectrograph is fully cryogenic and operates in the wavelength range 1 to 2.4 microns with five selectable filters. A prism is used to produce a spectral resolution of 45 in the primary detection band and maintain high throughput. Based on the OSIRIS spectrograph at Keck, we selected to use a lenslet-based spectrograph to achieve an rms wavefront error of approximately 25 nm. Over 36,000 spectra are taken simultaneously and reassembled into image cubes that have roughly 192x192 spatial elements and contain between 11 and 20 spectral channels. The primary dispersion prism can be replaced with a Wollaston prism for dual polarization measurements. The spectrograph also has a pupil-viewing mode for alignment and calibration.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
A Consistent Orbital Stability Analysis for the GJ 581 System
Authors:
David A. Joiner,
Cesar Sul,
Diana Dragomir,
Stephen R. Kane,
Monika E. Kress
Abstract:
We apply a combination of N-body modeling techniques and automated data fitting with Monte Carlo Markov Chain uncertainty analysis of Keplerian orbital models to radial velocity data to determine long term stability of the planetary system GJ 581. We find that while there are stability concerns with the 4-planet model as published by Forveille et al. (2011), when uncertainties in the system are ac…
▽ More
We apply a combination of N-body modeling techniques and automated data fitting with Monte Carlo Markov Chain uncertainty analysis of Keplerian orbital models to radial velocity data to determine long term stability of the planetary system GJ 581. We find that while there are stability concerns with the 4-planet model as published by Forveille et al. (2011), when uncertainties in the system are accounted for, particularly stellar jitter, the hypothesis that the 4-planet model is gravitationally unstable is not statistically significant. Additionally, the system including proposed planet g by Vogt et al. (2012) also shows some stability concerns when eccentricities are allowed to float in the orbital fit, yet when uncertainties are included in the analysis the system including planet g also can not be proven to be unstable. We present revised reduced chi-squared values for Keplerian astrocentric orbital fits assuming 4-planet and 5-planet models for GJ~581 under the condition that best fits must be stable, and find no distinguishable difference by including planet g in the model. Additionally we present revised orbital element estimates for each assuming uncertainties due to stellar jitter under the constraint of the system being gravitationally stable.
△ Less
Submitted 16 April, 2014;
originally announced April 2014.