-
Information carried by electromagnetic radiation launched from accelerated polarization currents
Authors:
John Singleton,
Andrea C. Schmidt,
Connor Bailey,
James Wigger,
Frank L. Krawczyk
Abstract:
We show experimentally that a continuous, linear, dielectric antenna in which a superluminal polarization-current distribution accelerates can be used to transmit a broadband signal that is reproduced in a comprehensible form at a chosen target distance and angle. The requirement for this exact correspondence between broadcast and received signals is that each moving point in the polarization-curr…
▽ More
We show experimentally that a continuous, linear, dielectric antenna in which a superluminal polarization-current distribution accelerates can be used to transmit a broadband signal that is reproduced in a comprehensible form at a chosen target distance and angle. The requirement for this exact correspondence between broadcast and received signals is that each moving point in the polarization-current distribution approaches the target at the speed of light at all times during its transit along the antenna. This results in a one-to-one correspondence between the time at which each point on the moving polarization current enters the antenna and the time at which {\it all} of the radiation emitted by this particular point during its transit through the antenna arrives simultaneously at the target. This has the effect of reproducing the desired time dependence of the original broadcast signal. For other observer/detector positions, the time dependence of the signal is scrambled, due to the non-trivial relationship between emission (retarded) time and reception time. This technique represents a contrast to conventional radio transmission methods; in most examples of the latter, signals are broadcast with little or no directivity, selectivity of reception being achieved through the use of narrow frequency bands. In place of this, the current paper uses a spread of frequencies to transmit information to a particular location; the signal is weaker and has a scrambled time dependence elsewhere. We point out the possible relevance of this mechanism to 5G neighbourhood networks. This work also constitutes a ground-based astrophysics experiment that gives strong clues towards the emission mechanism of pulsars.
△ Less
Submitted 27 December, 2020;
originally announced December 2020.
-
An Ultra-Compact X-Ray Free-Electron Laser
Authors:
J. B. Rosenzweig,
N. Majernik,
R. R. Robles,
G. Andonian,
O. Camacho,
A. Fukasawa,
A. Kogar,
G. Lawler,
Jianwei Miao,
P. Musumeci,
B. Naranjo,
Y. Sakai,
R. Candler,
B. Pound,
C. Pellegrini,
C. Emma,
A. Halavanau,
J. Hastings,
Z. Li,
M. Nasr,
S. Tantawi,
P. Anisimov,
B. Carlsten,
F. Krawczyk,
E. Simakov
, et al. (11 additional authors not shown)
Abstract:
In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this con…
▽ More
In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this context, recent advances in high gradient radio-frequency cryogenic copper structure research have opened the door to the use of surface electric fields between 250 and 500 MV/m. Such an approach is foreseen to enable a new generation of photoinjectors with six-dimensional beam brightness beyond the current state-of-the-art by well over an order of magnitude. This advance is an essential ingredient enabling an ultra-compact XFEL (UC-XFEL). In addition, one may accelerate these bright beams to GeV scale in less than 10 meters. Such an injector, when combined with inverse free electron laser-based bunching techniques can produce multi-kA beams with unprecedented beam quality, quantified by ~50 nm-rad normalized emittances. These beams, when injected into innovative, short-period (1-10 mm) undulators uniquely enable UC-XFELs having footprints consistent with university-scale laboratories. We describe the architecture and predicted performance of this novel light source, which promises photon production per pulse of a few percent of existing XFEL sources. We review implementation issues including collective beam effects, compact x-ray optics systems, and other relevant technical challenges. To illustrate the potential of such a light source to fundamentally change the current paradigm of XFELs with their limited access, we examine possible applications in biology, chemistry, materials, atomic physics, industry, and medicine which may profit from this new model of performing XFEL science.
△ Less
Submitted 14 August, 2020; v1 submitted 12 March, 2020;
originally announced March 2020.
-
RF Surface Resistance of a HIPped MgB2 Sample at 21 GHz
Authors:
T. Tajima,
F. L. Krawczyk,
J. Liu,
D. C. Nguyen,
D. L. Schrage,
A. Serquis,
A. H. Shapiro,
V. F. Nesterenko,
Y. Gu
Abstract:
Magnesium diboride (MgB2) is attractive for RF cavity application for particle accelerators because it might not show an increase of RF surface losses at high magnetic surface fields, a phenomenon that has prevented high-Tc superconducting materials such as YBCO from being used for this application. We have measured the RF surface resistance (Rs) at 21 GHz of a MgB2 sample fabricated using Hot I…
▽ More
Magnesium diboride (MgB2) is attractive for RF cavity application for particle accelerators because it might not show an increase of RF surface losses at high magnetic surface fields, a phenomenon that has prevented high-Tc superconducting materials such as YBCO from being used for this application. We have measured the RF surface resistance (Rs) at 21 GHz of a MgB2 sample fabricated using Hot Isostatic Press (HIP) at 200 MPa and 1000 C. The results show that polishing with 0.1-micron diamond lap** film followed by a 1500-psi DI water rinse in a clean room reduced the Rs by a factor of 6.2 at 15 K and it is the lowest compared to other published data. The Rs data near the lowest temperature (~13 K) scatter between 0.6 and 1.3 mOhm. The penetration depth and energy gap were estimated to be 263 nm and 1.9-2.7, respectively, for the polished surface.
△ Less
Submitted 9 October, 2003;
originally announced October 2003.
-
Status of Superconducting RF Linac Development for APT
Authors:
K. C. D. Chan,
B. M. Campbell,
D. C. Gautier,
R. C. Gentzlinger,
J. G. Gioia,
W. B. Haynes,
D. J. Katonak,
J. P. Kelley,
F. L. Krawczyk,
M. A. Madrid,
R. R. Mitchell,
D. I. Montoya,
E. N. Schmierer,
D. L. Schrage,
A. H. Shapiro,
T. Tajima,
J. A. Waynert,
J. Mammosser,
J. Kuzminski
Abstract:
This paper describes the development progress of high current superconducting RF linacs in Los Alamos, performed to support a design of the linac for the APT (Accelerator Production of Tritium) Project. The APT linac design includes a CW superconducting RF high energy section, spanning an energy range of 211 to 1030 MeV, and operating at a frequency of 700 MHz with two constant beta sections (be…
▽ More
This paper describes the development progress of high current superconducting RF linacs in Los Alamos, performed to support a design of the linac for the APT (Accelerator Production of Tritium) Project. The APT linac design includes a CW superconducting RF high energy section, spanning an energy range of 211 to 1030 MeV, and operating at a frequency of 700 MHz with two constant beta sections (beta of 0.64 and 0.82). In the last two years, we have progressed towards build a cryomodule with beta of 0.64. We completed the designs of the 5 cell superconducting cavities and the 210 kW power couplers. We are scheduled to begin assembly of the cryomodule in September 2000. In this paper, we present an overview of the status of our development efforts and a report on the results of the cavity and coupler test program.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
-
High-Power Testing of the APT Power Coupler
Authors:
E. N. Schmierer,
K. C. D. Chan,
D. C. Gautier,
J. G. Gioia,
W. B. Haynes,
F. L. Krawczyk,
M. A. Madrid,
D. L. Schrage,
J. A. Waynert,
B. Rusnak
Abstract:
For the baseline APT (Accelerator Production of Tritium) linac design, power couplers are required to transmit 210-kW of CW RF power to the superconducting cavities. These APT couplers operate at 700 MHz, have a coaxial design and an adjustable coupling to the superconducting cavities. Since May 1999, we have been testing couplers of this design on a room-temperature test stand. We completed tes…
▽ More
For the baseline APT (Accelerator Production of Tritium) linac design, power couplers are required to transmit 210-kW of CW RF power to the superconducting cavities. These APT couplers operate at 700 MHz, have a coaxial design and an adjustable coupling to the superconducting cavities. Since May 1999, we have been testing couplers of this design on a room-temperature test stand. We completed tests at transmitted-power and reflected-power conditions up to 1 MW. We also tested the couplers with a portion of the outer conductor cooled by liquid nitrogen. Under this latter condition, we studied the effects of condensed gases on coupler performance. The results of these tests indicate that the APT couplers are capable of delivering more than 500 kW to the cavities. We are in the process of increasing the baseline coupler design requirement to 420 kW of transmitted power to take advantage of this successful development. In this paper, we describe the results of our high-power coupler tests.
△ Less
Submitted 15 August, 2000;
originally announced August 2000.
