-
Neutron spin echo is a "quantum tale of two paths''
Authors:
S. McKay,
A. A. M. Irfan,
Q. Le Thien,
N. Geerits,
S. R. Parnell,
R. M. Dalgliesh,
N. V. Lavrik,
I. I. Kravchenko,
G. Ortiz,
R. Pynn
Abstract:
We describe an experiment that strongly supports a two-path interferometric model in which the spin-up and spin-down components of each neutron propagate coherently along spatially separated parallel paths in a typical neutron spin echo small angle scattering (SESANS) experiment. Specifically, we show that the usual semi-classical, single-path treatment of Larmor precession of a polarized neutron…
▽ More
We describe an experiment that strongly supports a two-path interferometric model in which the spin-up and spin-down components of each neutron propagate coherently along spatially separated parallel paths in a typical neutron spin echo small angle scattering (SESANS) experiment. Specifically, we show that the usual semi-classical, single-path treatment of Larmor precession of a polarized neutron in an external magnetic field predicts a dam** as a function of the spin echo length of the SESANS signal obtained with a periodic phase grating when the transverse width of the neutron wave packet is finite. However, no such dam** is observed experimentally, implying either that the Larmor model is incorrect or that the transverse extent of the wave packet is very large. In contrast, we demonstrate theoretically that a quantum-mechanical interferometric model in which the two mode-entangled (i.e. intraparticle entangled) spin states of a single neutron are separated in space when they interact with the grating accurately predicts the measured SESANS signal, which is independent of the wave packet width.
△ Less
Submitted 14 March, 2024; v1 submitted 7 September, 2023;
originally announced September 2023.
-
Intelligent Multi-channel Meta-imagers for Accelerating Machine Vision
Authors:
Hanyu Zheng,
Quan Liu,
Ivan I. Kravchenko,
Xiaomeng Zhang,
Yuankai Huo,
Jason G. Valentine
Abstract:
Rapid developments in machine vision have led to advances in a variety of industries, from medical image analysis to autonomous systems. These achievements, however, typically necessitate digital neural networks with heavy computational requirements, which are limited by high energy consumption and further hinder real-time decision-making when computation resources are not accessible. Here, we dem…
▽ More
Rapid developments in machine vision have led to advances in a variety of industries, from medical image analysis to autonomous systems. These achievements, however, typically necessitate digital neural networks with heavy computational requirements, which are limited by high energy consumption and further hinder real-time decision-making when computation resources are not accessible. Here, we demonstrate an intelligent meta-imager that is designed to work in concert with a digital back-end to off-load computationally expensive convolution operations into high-speed and low-power optics. In this architecture, metasurfaces enable both angle and polarization multiplexing to create multiple information channels that perform positive and negatively valued convolution operations in a single shot. The meta-imager is employed for object classification, experimentally achieving 98.6% accurate classification of handwritten digits and 88.8% accuracy in classifying fashion images. With compactness, high speed, and low power consumption, this approach could find a wide range of applications in artificial intelligence and machine vision applications.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
Meta-optic Accelerators for Object Classifiers
Authors:
Hanyu Zheng,
Quan Liu,
You Zhou,
Ivan I. Kravchenko,
Yuankai Huo,
Jason Valentine
Abstract:
Rapid advances in deep learning have led to paradigm shifts in a number of fields, from medical image analysis to autonomous systems. These advances, however, have resulted in digital neural networks with large computational requirements, resulting in high energy consumption and limitations in real-time decision making when computation resources are limited. Here, we demonstrate a meta-optic based…
▽ More
Rapid advances in deep learning have led to paradigm shifts in a number of fields, from medical image analysis to autonomous systems. These advances, however, have resulted in digital neural networks with large computational requirements, resulting in high energy consumption and limitations in real-time decision making when computation resources are limited. Here, we demonstrate a meta-optic based neural network accelerator that can off-load computationally expensive convolution operations into high-speed and low-power optics. In this architecture, metasurfaces enable both spatial multiplexing and additional information channels, such as polarization, in object classification. End-to-end design is used to co-optimize the optical and digital systems resulting in a robust classifier that achieves 95% accurate classification of handwriting digits and 94% accuracy in classifying both the digit and its polarization state. This approach could enable compact, high-speed, and low-power image and information processing systems for a wide range of applications in machine-vision and artificial intelligence.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
All-Dielectric Meta-optics for High-Efficiency Independent Amplitude and Phase Manipulation
Authors:
Brian O. Raeker,
Hanyu Zheng,
You Zhou,
Ivan I. Kravchenko,
Jason Valentine,
Anthony Grbic
Abstract:
Metasurfaces, composed of subwavelength scattering elements, have demonstrated remarkable control over the transmitted amplitude, phase, and polarization of light. However, manipulating the amplitude upon transmission has required loss if a single metasurface is used. Here, we describe high-efficiency independent manipulation of the amplitude and phase of a beam using two lossless phase-only metas…
▽ More
Metasurfaces, composed of subwavelength scattering elements, have demonstrated remarkable control over the transmitted amplitude, phase, and polarization of light. However, manipulating the amplitude upon transmission has required loss if a single metasurface is used. Here, we describe high-efficiency independent manipulation of the amplitude and phase of a beam using two lossless phase-only metasurfaces separated by a distance. With this configuration, we experimentally demonstrate optical components such as combined beam-forming and splitting devices, as well as those for forming complex-valued, three-dimensional holograms. The compound meta-optic platform provides a promising approach for achieving high performance optical holographic displays and compact optical components, while exhibiting a high overall efficiency.
△ Less
Submitted 2 April, 2021;
originally announced April 2021.
-
Image Processing Based on Compound Flat Optics
Authors:
You Zhou,
Hanyu Zheng,
Ivan I. Kravchenko,
Jason Valentine
Abstract:
Image processing has become a critical technology in a variety of science and engineering disciplines. While most image processing is performed digitally, optical analog processing has the advantages of being low-power and high-speed though it requires a large volume. Here, we demonstrate optical analog imaging processing using a flat optic for direct image differentiation allowing one to signific…
▽ More
Image processing has become a critical technology in a variety of science and engineering disciplines. While most image processing is performed digitally, optical analog processing has the advantages of being low-power and high-speed though it requires a large volume. Here, we demonstrate optical analog imaging processing using a flat optic for direct image differentiation allowing one to significantly shrink the required optical system size. We first demonstrate how the image differentiator can be combined with traditional imaging systems such as a commercial optical microscope and camera sensor for edge detection. Second, we demonstrate how the entire analog processing system can be realized as a monolithic compound flat optic by integrating the differentiator with a metalens. The compound nanophotonic system manifests the advantage of thin form factor optics as well as the ability to implement complex transfer functions and could open new opportunities in applications such as biological imaging and machine vision.
△ Less
Submitted 4 September, 2019;
originally announced September 2019.
-
Quantum metasurface for multi-photon interference and state reconstruction
Authors:
Kai Wang,
James G. Titchener,
Sergey S. Kruk,
Lei Xu,
Hung-Pin Chung,
Matthew Parry,
Ivan I. Kravchenko,
Yen-Hung Chen,
Alexander S. Solntsev,
Yuri S. Kivshar,
Dragomir N. Neshev,
Andrey A. Sukhorukov
Abstract:
Metasurfaces based on resonant nanophotonic structures have enabled novel types of flat-optics devices often outperforming the capabilities of bulk components, yet these advances remain largely unexplored for quantum applications. We show that non-classical multi-photon interferences can be achieved at the subwavelength scale in all-dielectric metasurfaces. We simultaneously image multiple project…
▽ More
Metasurfaces based on resonant nanophotonic structures have enabled novel types of flat-optics devices often outperforming the capabilities of bulk components, yet these advances remain largely unexplored for quantum applications. We show that non-classical multi-photon interferences can be achieved at the subwavelength scale in all-dielectric metasurfaces. We simultaneously image multiple projections of quantum states with a single metasurface, enabling a robust reconstruction of amplitude, phase, coherence, and entanglement of multi-photon polarization-encoded states. One- and two-photon states are reconstructed through nonlocal photon correlation measurements with polarization-insensitive click-detectors positioned after the metasurface, and the scalability to higher photon numbers is established theoretically. Our work illustrates the feasibility of ultra-thin quantum metadevices for the manipulation and measurement of multi-photon quantum states with applications in free-space quantum imaging and communications.
△ Less
Submitted 24 July, 2018; v1 submitted 10 April, 2018;
originally announced April 2018.
-
Quantification of Probe-Sample Electrostatic Forces with Dynamic Atomic Force Microscopy
Authors:
Nina Balke,
Stephen Jesse,
Ben Carmichael,
M. Baris Okatan,
Ivan I. Kravchenko,
Sergei V. Kalinin,
Alexander Tselev
Abstract:
Atomic Force Microscopy (AFM) methods utilizing resonant mechanical vibrations of cantilevers in contact with a sample surface have shown sensitivities as high as few picometers for detecting surface displacements. Such a high sensitivity is harnessed in several AFM imaging modes. Here, we demonstrate a cantilever-resonance-based method to quantify electrostatic forces on a probe arising in the pr…
▽ More
Atomic Force Microscopy (AFM) methods utilizing resonant mechanical vibrations of cantilevers in contact with a sample surface have shown sensitivities as high as few picometers for detecting surface displacements. Such a high sensitivity is harnessed in several AFM imaging modes. Here, we demonstrate a cantilever-resonance-based method to quantify electrostatic forces on a probe arising in the presence of a surface potential or when a bias voltage is applied to the AFM probe. We find that the electrostatic forces acting on the probe tip apex can strongly dominate cantilever response in electromechanical measurements and produce signals equivalent to few pm of surface displacement. In combination with modeling, the measurements of the force were used to determine the strength of the electrical field at the probe tip apex in contact with a sample. We find an evidence that the electric field strength in the junctions is limited by about 0.5 V/nm. This field can be sufficiently strong to significantly influence material states and kinetic processes through charge injection, Maxwell stress, shifts of phase equilibria, and reduction of energy barriers for activated processes. Besides, the results provide a baseline for accounting for the effects of local electrostatic forces in electromechanical AFM measurements as well as offer additional means to probe ionic mobility and field-induced phenomena in solids.
△ Less
Submitted 16 October, 2016; v1 submitted 12 October, 2016;
originally announced October 2016.
-
High Quality Factor Fano-Resonant All-Dielectric Metamaterials
Authors:
Yuanmu Yang,
Ivan I. Kravchenko,
Dayrl P. Briggs,
Jason Valentine
Abstract:
Metasurface analogues of electromagnetically induced transparency (EIT) have been a major focus of the nanophotonics field over the past several years due their ability to produce high quality factor (Q-factor) resonances for applications such as low-loss slow light devices and highly sensitive optical sensors. However, Ohmic loss limits the achievable Q-factors in conventional plasmonic EIT metas…
▽ More
Metasurface analogues of electromagnetically induced transparency (EIT) have been a major focus of the nanophotonics field over the past several years due their ability to produce high quality factor (Q-factor) resonances for applications such as low-loss slow light devices and highly sensitive optical sensors. However, Ohmic loss limits the achievable Q-factors in conventional plasmonic EIT metasurfaces to values less than 10, significantly hampering device performance. Here, we report experimental demonstration of a classical analogue of EIT using all-dielectric silicon-based metasurfaces. Due to extremely low absorption loss and coherent interaction of neighboring meta-atoms, a record-high Q-factor of 483 is experimentally observed, leading to a refractive index sensor with a figure-of-merit (FOM) of 103. Furthermore, we show that the dielectric metasurfaces can be engineered to confine the optical field in either the silicon resonator or the environment, allowing one to tailor light-matter interaction at the nanoscale.
△ Less
Submitted 15 August, 2014; v1 submitted 15 May, 2014;
originally announced May 2014.
-
Realization of an all-dielectric zero-index optical metamaterial
Authors:
Parikshit Moitra,
Yuanmu Yang,
Zachary Anderson,
Ivan I. Kravchenko,
Dayrl P. Briggs,
Jason Valentine
Abstract:
Metamaterials offer unprecedented flexibility for manipulating the optical properties of matter, including the ability to access negative index, ultra-high index and chiral optical properties. Recently, metamaterials with near-zero refractive index have drawn much attention. Light inside such materials experiences no spatial phase change and extremely large phase velocity, properties that can be a…
▽ More
Metamaterials offer unprecedented flexibility for manipulating the optical properties of matter, including the ability to access negative index, ultra-high index and chiral optical properties. Recently, metamaterials with near-zero refractive index have drawn much attention. Light inside such materials experiences no spatial phase change and extremely large phase velocity, properties that can be applied for realizing directional emission, tunneling waveguides, large area single mode devices, and electromagnetic cloaks. However, at optical frequencies previously demonstrated zero- or negative-refractive index metamaterials require the use of metallic inclusions, leading to large ohmic loss, a serious impediment to device applications. Here, we experimentally demonstrate an impedance matched zero-index metamaterial at optical frequencies based on purely dielectric constituents. Formed from stacked silicon rod unit cells, the metamaterial possesses a nearly isotropic low-index response leading to angular selectivity of transmission and directive emission from quantum dots placed within the material.
△ Less
Submitted 18 July, 2013;
originally announced July 2013.
-
Casimir forces on a silicon micromechanical chip
Authors:
J. Zou,
Z. Marcet,
A. W. Rodriguez,
M. T. H. Reid,
A. P. McCauley,
I. I. Kravchenko,
T. Lu,
Y. Bao,
S. G. Johnson,
H. B. Chan
Abstract:
Quantum fluctuations give rise to van der Waals and Casimir forces that dominate the interaction between electrically neutral objects at sub-micron separations. Under the trend of miniaturization, such quantum electrodynamical effects are expected to play an important role in micro- and nano-mechanical devices. Nevertheless, utilization of Casimir forces on the chip level remains a major challenge…
▽ More
Quantum fluctuations give rise to van der Waals and Casimir forces that dominate the interaction between electrically neutral objects at sub-micron separations. Under the trend of miniaturization, such quantum electrodynamical effects are expected to play an important role in micro- and nano-mechanical devices. Nevertheless, utilization of Casimir forces on the chip level remains a major challenge because all experiments so far require an external object to be manually positioned close to the mechanical element. Here, by integrating a force-sensing micromechanical beam and an electrostatic actuator on a single chip, we demonstrate the Casimir effect between two micromachined silicon components on the same substrate. A high degree of parallelism between the two near-planar interacting surfaces can be achieved because they are defined in a single lithographic step. Apart from providing a compact platform for Casimir force measurements, this scheme also opens the possibility of tailoring the Casimir force using lithographically defined components of non-conventional shapes.
△ Less
Submitted 17 May, 2013; v1 submitted 25 July, 2012;
originally announced July 2012.