Visualisation of sulphur on single fibre level for pul** industry
Authors:
Börje Norlin,
Siwen An,
Thomas Granfeldt,
David Krapohl,
Barry Lai,
Hafizur Rahman,
Faisal Zeeshan,
Per Engstrand
Abstract:
In the pulp and paper industry, about 5 Mt/y chemithermomechanical pulp (CTMP) are produced globally from softwood chips for production of carton board grades. For tailor making CTMP for this purpose, wood chips are impregnated with aqueous sodium sulphite for sulphonation of the wood lignin. When lignin is sulphonated, the defibration of wood into pulp becomes more selective, resulting in enhance…
▽ More
In the pulp and paper industry, about 5 Mt/y chemithermomechanical pulp (CTMP) are produced globally from softwood chips for production of carton board grades. For tailor making CTMP for this purpose, wood chips are impregnated with aqueous sodium sulphite for sulphonation of the wood lignin. When lignin is sulphonated, the defibration of wood into pulp becomes more selective, resulting in enhanced pulp properties. On a microscopic fibre scale, however, one could strongly assume that the sulphonation of the wood structure is very uneven due to its macroscale size of wood chips. If this is the case and the sulphonation could be done significantly more evenly, the CTMP process could be more efficient and produce pulp even better suited for carton boards. Therefore, the present study aimed to develop a technique based on X-ray fluorescence microscopy imaging (uXRF) for quantifying the sulphur distribution on CTMP wood fibres.
The feasibility of uXRF imaging for sulphur homogeneity measurements in wood fibres needs investigation. Clarification of which spatial and spectral resolution that allows visualization of sulphur impregnation into single wood fibres is needed. Measurements of single fibre imaging were carried out at the APS synchrotron facility. With a synchrotron beam using 1 um scanning step, images of elemental map** are acquired from CTMP samples diluted with non-sulphonated pulp under specified conditions. Since the measurements show significant differ-ences between sulphonated and non-sulphonated fibres, and a significant peak concentration in the shell of the sulphonated fibres, the proposed technique is found to be feasible. The required spatial resolution of the uXRF imaging for an on-site CTMP sulphur homogeneity measurement setup is about 15 um, and the homogeneity measured along the fibre shells is suggested to be used as the CTMP sulphonation measurement parameter.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
Characterization of micro pore optics for full-field X-ray fluorescence imaging
Authors:
Siwen An,
David Krapohl,
Benny Thörnberg,
Romain Roudot,
Emile Schyns,
Börje Norlin
Abstract:
Elemental map** images can be achieved through step scanning imaging using pinhole optics or micro pore optics (MPO), or alternatively by full-field X-ray fluorescence imaging (FF-XRF). X-ray optics for FF-XRF can be manufactured with different micro-channel geometries such as square, hexagonal or circular channels. Each optic geometry creates different imaging artefacts. Square-channel MPOs gen…
▽ More
Elemental map** images can be achieved through step scanning imaging using pinhole optics or micro pore optics (MPO), or alternatively by full-field X-ray fluorescence imaging (FF-XRF). X-ray optics for FF-XRF can be manufactured with different micro-channel geometries such as square, hexagonal or circular channels. Each optic geometry creates different imaging artefacts. Square-channel MPOs generate a high intensity central spot due to two reflections via orthogonal channel walls inside a single channel, which is the desirable part for image formation, and two perpendicular lines forming a cross due to reflections in one plane only.
Thus, we have studied the performance of a square-channel MPO in an FF-XRF imaging system. The setup consists of a commercially available MPO provided by Photonis and a Timepix3 readout chip with a silicon detector. Imaging of fluorescence from small metal particles has been used to obtain the point spread function (PSF) characteristics. The transmission through MPO channels and variation of the critical reflection angle are characterized by measurements of fluorescence from Copper and Titanium metal fragments. Since the critical angle of reflection is energy dependent, the cross-arm artefacts will affect the resolution differently for different fluorescence energies. It is possible to identify metal fragments due to the form of the PSF function. The PSF function can be further characterized using a Fourier transform to suppress diffuse background signals in the image.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
