Showing 1–50 of 58 results for author: Kröger, J

Tilted CO-terminated probes in scanning tunneling microscopy

Authors: Ivan Abilio, Nicolas Néel, Jörg Kröger, Krisztián Palotás

Abstract: Scanning tunneling microscopy with a CO-functionalized tip is combined with simulations to explore the impact of the CO tilt angle on topographies of a single Cu atom and CO molecule adsorbed on Cu(111). Images of the Cu atom acquired with varying tip tilt angles and sample voltages are reproduced by the calculations. The agreement between measured and simulated data allows to unveil the tip-orbit… ▽ More Scanning tunneling microscopy with a CO-functionalized tip is combined with simulations to explore the impact of the CO tilt angle on topographies of a single Cu atom and CO molecule adsorbed on Cu(111). Images of the Cu atom acquired with varying tip tilt angles and sample voltages are reproduced by the calculations. The agreement between measured and simulated data allows to unveil the tip-orbital composition of the tunneling current, which highlights the role of the different $p$-orbitals of the CO-tip. Topographies of adsorbed CO and their dependence on voltage and probe-surface distance are captured for the nontilted junction geometry and in the limit of weak molecular interactions. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 10 pages, 8 figures, submitted to PRB

An Integrated Solar Battery based on a Charge Storing 2D Carbon Nitride

Authors: Andreas Gouder, Filip Podjaski, Alberto Jiménez-Solano, Julia Kröger, Yang Wang, Bettina V. Lotsch

Abstract: Solar batteries capable of harvesting sunlight and storing solar energy present an attractive vista to transition our energy infrastructure into a sustainable future. We present an integrated, fully earth-abundant solar battery design based on a bifunctional (light absorbing and charge storing) carbon nitride (K-PHI) photoanode, combined with all-organic hole transfer and storage materials. An int… ▽ More Solar batteries capable of harvesting sunlight and storing solar energy present an attractive vista to transition our energy infrastructure into a sustainable future. We present an integrated, fully earth-abundant solar battery design based on a bifunctional (light absorbing and charge storing) carbon nitride (K-PHI) photoanode, combined with all-organic hole transfer and storage materials. An internal ladder-type hole transfer cascade via a hole transport layer is used to shuttle the photogenerated holes to the PEDOT:PSS cathode. This concept differs from previous designs such as light-assisted battery schemes or photocapacitors and allows charging with only light or light-assisted during electrical charging and discharging, thus substantially increasing the energy output of the cell. Compared to battery operation in the dark, light-assisted (dis)charging increases charge output by 243 %, thereby increasing the electric coulombic efficiency from 68.3 % in the dark to 231 %, leading to energy improvements of 94.1 % under illumination. △ Less

Submitted 6 September, 2022; originally announced September 2022.

Comments: manuscript and supplementary information

Comparison of different sensor thicknesses and substrate materials for the monolithic small collection-electrode technology demonstrator CLICTD

Authors: Katharina Dort, Rafael Ballabriga, Justus Braach, Eric Buschmann, Michael Campbell, Dominik Dannheim, Lennart Huth, Iraklis Kremastiotis, Jens Kröger, Lucie Linssen, Magdalena Munker, Walter Snoeys, Simon Spannagel, Peter Švihra, Tomas Vanat

Abstract: Small collection-electrode monolithic CMOS sensors profit from a high signal-to-noise ratio and a small power consumption, but have a limited active sensor volume due to the fabrication process based on thin high-resistivity epitaxial layers. In this paper, the active sensor depth is investigated in the monolithic small collection-electrode technology demonstrator CLICTD. Charged particle beams ar… ▽ More Small collection-electrode monolithic CMOS sensors profit from a high signal-to-noise ratio and a small power consumption, but have a limited active sensor volume due to the fabrication process based on thin high-resistivity epitaxial layers. In this paper, the active sensor depth is investigated in the monolithic small collection-electrode technology demonstrator CLICTD. Charged particle beams are used to study the charge-collection properties and the performance of devices with different thicknesses both for perpendicular and inclined particle incidence. In CMOS sensors with a high-resistivity Czochralski substrate, the depth of the sensitive volume is found to increase by a factor two in comparison with standard epitaxial material and leads to significant improvements in the hit-detection efficiency and the spatial and time resolution. △ Less

Submitted 30 August, 2022; v1 submitted 22 April, 2022; originally announced April 2022.

Transient Monte Carlo Simulations for the Optimisation and Characterisation of Monolithic Silicon Sensors

Authors: Rafael Ballabriga, Justus Braach, Eric Buschmann, Michael Campbell, Dominik Dannheim, Katharina Dort, Lennart Huth, Iraklis Kremastiotis, Jens Kröger, Lucie Linssen, Magdalena Munker, Paul Schütze, Walter Snoeys, Simon Spannagel, Tomas Vanat

Abstract: An ever-increasing demand for high-performance silicon sensors requires complex sensor designs that are challenging to simulate and model. The combination of electrostatic finite element simulations with a transient Monte Carlo approach provides simultaneous access to precise sensor modelling and high statistics. The high simulation statistics enable the inclusion of Landau fluctuations and produc… ▽ More An ever-increasing demand for high-performance silicon sensors requires complex sensor designs that are challenging to simulate and model. The combination of electrostatic finite element simulations with a transient Monte Carlo approach provides simultaneous access to precise sensor modelling and high statistics. The high simulation statistics enable the inclusion of Landau fluctuations and production of secondary particles, which offers a realistic simulation scenario. The transient simulation approach is an important tool to achieve an accurate time-resolved description of the sensor, which is crucial in the face of novel detector prototypes with increasingly precise timing capabilities. The simulated time resolution as a function of operating parameters as well as the full transient pulse can be monitored and assessed, which offers a new perspective on the optimisation and characterisation of silicon sensors. In this paper, a combination of electrostatic finite-element simulations using 3D TCAD and transient Monte Carlo simulations with the Allpix Squared framework are presented for a monolithic CMOS pixel sensor with a small collection diode, that is characterised by a highly inhomogeneous, complex electric field. The results are compared to transient 3D TCAD simulations that offer a precise simulation of the transient behaviour but long computation times. Additionally, the simulations are benchmarked against test-beam data and good agreement is found for the performance parameters over a wide range of different operation conditions. △ Less

Submitted 9 February, 2022; v1 submitted 7 February, 2022; originally announced February 2022.

Performance Studies of the ATLASpix HV-MAPS Prototype for Different Substrate Resistivities

Authors: Jens Kröger

Abstract: The ATLASpix high-voltage monolithic active pixel sensor (HV-MAPS) was designed as a technology demonstrator for the ATLAS ITk Upgrade and the CLIC tracking detector. In this contribution new results from laboratory-based energy calibration measurements using fluorescence X-rays are presented for the ATLASpix Simple matrix. These findings are complemented by new results from test-beam studies with… ▽ More The ATLASpix high-voltage monolithic active pixel sensor (HV-MAPS) was designed as a technology demonstrator for the ATLAS ITk Upgrade and the CLIC tracking detector. In this contribution new results from laboratory-based energy calibration measurements using fluorescence X-rays are presented for the ATLASpix Simple matrix. These findings are complemented by new results from test-beam studies with inclined tracks, in which the active charge collection depth is determined. △ Less

Submitted 11 May, 2022; v1 submitted 26 June, 2021; originally announced June 2021.

Comments: Proceedings for TIPP2021, 5 pages, 8 figures

Electric-field control of a single-atom polar bond

Authors: M. Omidian, S. Leitherer, N. Neel, M. Brandbyge, J. Kröger

Abstract: The polar covalent bond between a single Au atom terminating the apex of an atomic force microscope tip and a C atom of graphene on SiC(0001) is exposed to an external electric field. For one field orientation the Au-C bond is strong enough to sustain the mechanical load of partially detached graphene, whilst for the opposite orientation the bond breaks easily. Calculations based on density functi… ▽ More The polar covalent bond between a single Au atom terminating the apex of an atomic force microscope tip and a C atom of graphene on SiC(0001) is exposed to an external electric field. For one field orientation the Au-C bond is strong enough to sustain the mechanical load of partially detached graphene, whilst for the opposite orientation the bond breaks easily. Calculations based on density functional theory and nonequilibrium Green's function methods support the experimental observations by unveiling bond forces that reflect the polar character of the bond. Field-induced charge transfer between the atomic orbitals modifies the polarity of the different electronegative reaction partners and the Au-C bond strength. △ Less

Submitted 7 May, 2021; originally announced May 2021.

Biocompatible carbon nitride-based light-driven microswimmer propulsion in biological and ionic media with responsive on-demand drug delivery

Authors: Varun Sridhar, Filip Podjaski, Yunus Alapan, Julia Kröger, Lars Grunenberg, Vimal Kishore, Bettina V. Lotsch, Metin Sitti

Abstract: We propose two-dimensional organic poly(heptazine imide) (PHI) carbon nitride microparticles as light-driven microswimmers in various ionic and biological media. Their demonstrated high-speed (15-23 $μ$m/s) swimming in multi-component ionic solutions with concentrations up to 1 M and without dedicated fuels is unprecedented, overcoming one of the bottlenecks of previous light-driven microswimmers.… ▽ More We propose two-dimensional organic poly(heptazine imide) (PHI) carbon nitride microparticles as light-driven microswimmers in various ionic and biological media. Their demonstrated high-speed (15-23 $μ$m/s) swimming in multi-component ionic solutions with concentrations up to 1 M and without dedicated fuels is unprecedented, overcoming one of the bottlenecks of previous light-driven microswimmers. Such high ion tolerance is attributed to a favorable interplay between the particle's textural and structural nanoporosity and optoionic properties, facilitating ionic interactions in solutions with high salinity. Biocompatibility of the microswimmers is validated by cell viability tests with three different cell types and primary cells. The nanopores of the swimmers are loaded with a model cancer drug, doxorubicin (DOX), in high (185%) loading efficiency without passive release. Controlled drug release is reported in different pH conditions and can be triggered on-demand also by illumination. Light-triggered, boosted release of DOX and its active degradation products is demonstrated in oxygen-poor conditions using the intrinsic, environmentally sensitive and light-induced charge storage properties of PHI, which could enable future theranostic applications in oxygen-deprived tumor regions. These organic PHI microswimmers simultaneously solve the current light-driven microswimmer challenges of high ion tolerance, fuel-free high-speed propulsion in biological media, biocompatibility and controlled on-demand cargo release towards their biomedical, environmental and other potential future applications. △ Less

Submitted 31 March, 2021; originally announced March 2021.

Comments: 4 figures

Atomic Force Extrema Induced by the Bending of a CO-Functionalized Probe

Authors: Nicolas Néel, Jörg Kröger

Abstract: The control and observation of reactants forming a chemical bond at the single-molecule level is a longstanding challenge in quantum physics and chemistry. Using a single CO molecule adsorbed at the apex of an atomic force microscope tip together with a Cu(111) surface, the molecular bending is induced by torques due to van der Waals attraction and Pauli repulsion. As a result, the vertical force… ▽ More The control and observation of reactants forming a chemical bond at the single-molecule level is a longstanding challenge in quantum physics and chemistry. Using a single CO molecule adsorbed at the apex of an atomic force microscope tip together with a Cu(111) surface, the molecular bending is induced by torques due to van der Waals attraction and Pauli repulsion. As a result, the vertical force exhibits a characteristic dip-hump evolution with the molecule-surface separation, which depends sensitively on the initial tilt angle the CO axis encloses with the surface normal. The experimental force data are reproduced by model calculations that consider the CO deflection in a harmonic potential and the molecular orientation in the Pauli repulsion term of the Lennard-Jones potential. The presented findings shed new light on vertical-force extrema that can occur in scanning probe experiments with functionalized tips. △ Less

Submitted 22 February, 2021; originally announced February 2021.

Comments: 27 pages, 11 figures

Test-beam characterisation of the CLICTD technology demonstrator - a small collection electrode High-Resistivity CMOS pixel sensor with simultaneous time and energy measurement

Authors: R. Ballabriga, E. Buschmann, M. Campbell, D. Dannheim, K. Dort, N. Egidos, L. Huth, I. Kremastiotis, J. Kröger, L. Linssen, X. Llopart, M. Munker, A. Nürnberg, W. Snoeys, S. Spannagel, T. Vanat, M. Vicente, M. Williams

Abstract: The CLIC Tracker Detector (CLICTD) is a monolithic pixel sensor. It is fabricated in a 180 nm CMOS imaging process, modified with an additional deep low-dose n-type implant to obtain full lateral depletion. The sensor features a small collection diode, which is essential for achieving a low input capacitance. The CLICTD sensor was designed as a technology demonstrator in the context of the trackin… ▽ More The CLIC Tracker Detector (CLICTD) is a monolithic pixel sensor. It is fabricated in a 180 nm CMOS imaging process, modified with an additional deep low-dose n-type implant to obtain full lateral depletion. The sensor features a small collection diode, which is essential for achieving a low input capacitance. The CLICTD sensor was designed as a technology demonstrator in the context of the tracking detector studies for the Compact Linear Collider (CLIC). Its design characteristics are of broad interest beyond CLIC, for HL-LHC tracking detector upgrades. It is produced in two different pixel flavours: one with a continuous deep n-type implant, and one with a segmented n-type implant to ensure fast charge collection. The pixel matrix consists of $16\times128$ detection channels measuring $300 \times 30$ microns. Each detection channel is segmented into eight sub-pixels to reduce the amount of digital circuity while maintaining a small collection electrode pitch. This paper presents the characterisation results of the CLICTD sendor in a particle beam. The different pixel flavours are compared in detail by using the simultaneous time-over-threshold and time-of-arrival measurement functionalities. Most notably, a time resolution down to $(5.8 \pm 0.1)$ ns and a spatial resolution down to $(4.6 \pm 0.2)$ microns are measured. The hit detection efficiency is found to be well above 99.7% for thresholds of the order of several hundred electrons. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Corryvreckan: A Modular 4D Track Reconstruction and Analysis Software for Test Beam Data

Authors: Dominik Dannheim, Katharina Dort, Lennart Huth, Daniel Hynds, Iraklis Kremastiotis, Jens Kröger, Magdalena Munker, Florian Pitters, Paul Schütze, Simon Spannagel, Tomas Vanat, Morag Williams

Abstract: Corryvreckan is a versatile, highly configurable software with a modular structure designed to reconstruct and analyse test beam and laboratory data. It caters to the needs of the test beam community by providing a flexible offline event building facility to combine detectors with different read-out schemes, with or without trigger information, and includes the possibility to correlate data from m… ▽ More Corryvreckan is a versatile, highly configurable software with a modular structure designed to reconstruct and analyse test beam and laboratory data. It caters to the needs of the test beam community by providing a flexible offline event building facility to combine detectors with different read-out schemes, with or without trigger information, and includes the possibility to correlate data from multiple devices based on timestamps. Hit timing information, available with high precision from an increasing number of detectors, can be used in clustering and tracking to reduce combinatorics. Several algorithms, including an implementation of Millepede-II, are provided for offline alignment. A graphical user interface enables direct monitoring of the reconstruction progress and can be employed for quasi-online monitoring during data taking. This work introduces the Corryvreckan framework architecture and user interface, and provides a detailed overview of the event building algorithm. The reconstruction and analysis capabilities are demonstrated with data recorded at the DESY II Test Beam Facility using the EUDAQ2 data acquisition framework with an EUDET-type beam telescope, a Timepix3 timing reference, a fine-pitch planar silicon sensor with CLICpix2 readout and the AIDA Trigger Logic Unit. The individual steps of the reconstruction chain are presented in detail. △ Less

Submitted 13 January, 2021; v1 submitted 25 November, 2020; originally announced November 2020.

Report number: CLICdp-Pub-2020-005

Efficient Analysis of Test-beam Data with the Corryvreckan Framework

Authors: Jens Kröger, Lennart Huth

Abstract: Stringent requirements are posed on the the next generations of vertex and tracking detectors for high-energy physics experiments to reach the foreseen physics goals. A large variety of silicon pixel sensors targeting the specific needs of each use case are developed and tested both in laboratory and test-beam measurement campaigns. Corryvreckan is a flexible, fast and lightweight test-beam data r… ▽ More Stringent requirements are posed on the the next generations of vertex and tracking detectors for high-energy physics experiments to reach the foreseen physics goals. A large variety of silicon pixel sensors targeting the specific needs of each use case are developed and tested both in laboratory and test-beam measurement campaigns. Corryvreckan is a flexible, fast and lightweight test-beam data reconstruction and analysis framework based on a modular concept of the reconstruction chain. It is designed to fulfil the requirements for offline event building in complex data-taking environments combining detectors with different readout schemes. Its modular architecture separates the framework core from the implementation of reconstruction, analysis and detector specific algorithms. In this paper, a brief overview of the software framework and the reconstruction and analysis chain is provided. This is complemented by an example analysis of a data set using the offline event building capabilities of the framework and an improved event building scheme allowing for a more efficient usage of test-beam data exploiting the pivot pixel information of the Mimosa26 sensors. △ Less

Submitted 9 February, 2021; v1 submitted 18 November, 2020; originally announced November 2020.

Comments: Proceedings for Vertex2020, 8 pages, 5 figures

Adjoint Complement to the Volume-of-Fluid Method for Immiscible Flows

Authors: Niklas Kühl, Jörn Kröger, Martin Siebenborn, Michael Hinze, Thomas Rung

Abstract: The paper is concerned with an adjoint complement to the Volume-of-Fluid (VoF) method for immiscible two-phase flows, e.g. air and water, which is widely used in marine engineering due to its computational efficiency. The particular challenge of the primal and the corresponding adjoint VoF-approach refers to the sharp interface treatment featuring discontinuous physical properties. Both the contin… ▽ More The paper is concerned with an adjoint complement to the Volume-of-Fluid (VoF) method for immiscible two-phase flows, e.g. air and water, which is widely used in marine engineering due to its computational efficiency. The particular challenge of the primal and the corresponding adjoint VoF-approach refers to the sharp interface treatment featuring discontinuous physical properties. Both the continuous adjoint two-phase system (integration-by-parts) and the corresponding dual compressive convection schemes (summation-by-parts) are derived for two prominent compressive convection schemes, namely the High Resolution Interface Capturing Scheme (HRIC) and Compressive Interface Capturing Scheme for Arbitrary Meshes (CICSAM). The dual scheme rigorously mirrors the primal Normalized-Variable-Diagram (NVD) stencils. Attention is restricted to steady state applications. Thus both the primal and the dual procedures are performed in pseudo time and the backward integration of the dual approach is performed around the (pseudo-temporal) converged primal field. The paper analyses the primal and adjoint equations for an engineering model problem. An analytical solution to the model problem is initially presented, which displays that the adjoint part does not offer a unique, non-trivial solution. As a remedy, an additional diffusive concentration term is introduced to the adjoint concentration equation. Numerical results obtained from the modified approach are benchmarked against the analytical solution for the model problem. Supplementary, the influence of the modification on the sensitivities obtained from simulations for the two-dimensional flow around a submerged hydrofoil are discussed. The final application refers to a shape-optimization of a generic 3D underwater vehicle and underlines a negligible influence of the free mobility parameter. △ Less

Submitted 6 September, 2020; originally announced September 2020.

Silicon Pixel R&D for the CLIC Tracking Detector

Authors: Jens Kröger

Abstract: The physics aims at the proposed high-energy $e^+e^-$ collider CLIC pose challenging demands on the performance of the detector system. Precise hit-time tagging, an excellent spatial resolutions, and a low mass are required for the vertex and tracking detectors. To meet these requirements, an all-silicon vertex and tracking detector system is foreseen, for which a broad R&D programme on a variety… ▽ More The physics aims at the proposed high-energy $e^+e^-$ collider CLIC pose challenging demands on the performance of the detector system. Precise hit-time tagging, an excellent spatial resolutions, and a low mass are required for the vertex and tracking detectors. To meet these requirements, an all-silicon vertex and tracking detector system is foreseen, for which a broad R&D programme on a variety of novel silicon detector technologies is being pursued. For the ultra-low mass vertex detector, different hybrid technologies with innovative sensor concepts and interconnection techniques are explored. For the large-scale tracking detector, the focus of the R&D lies on monolithic HV-MAPS and HR-CMOS technologies. This contribution gives an overview of the ongoing activities with a focus on monolithic technologies for the CLIC tracking detector. Recent results from laboratory and test-beam measurement campaigns of the ATLASpix_Simple and the CLICTD sensor prototypes are presented. △ Less

Submitted 20 May, 2020; v1 submitted 2 May, 2020; originally announced May 2020.

Comments: Proceedings for INSTR20, 10 pages, 9 figures

A collision-resilient aerial vehicle with icosahedron tensegrity structure

Authors: Jiaming Zha, Xiangyu Wu, Joseph Kroeger, Natalia Perez, Mark W. Mueller

Abstract: Aerial vehicles with collision resilience can operate with more confidence in environments with obstacles that are hard to detect and avoid. This paper presents the methodology used to design a collision resilient aerial vehicle with icosahedron tensegrity structure. A simplified stress analysis of the tensegrity frame under impact forces is performed to guide the selection of its components. In a… ▽ More Aerial vehicles with collision resilience can operate with more confidence in environments with obstacles that are hard to detect and avoid. This paper presents the methodology used to design a collision resilient aerial vehicle with icosahedron tensegrity structure. A simplified stress analysis of the tensegrity frame under impact forces is performed to guide the selection of its components. In addition, an autonomous controller is presented to reorient the vehicle from an arbitrary orientation on the ground to help it take off. Experiments show that the vehicle can successfully reorient itself after landing upside-down and can survive collisions with speed up to 6.5m/s. △ Less

Submitted 6 March, 2020; originally announced March 2020.

MuPix and ATLASPix -- Architectures and Results

Authors: A. Schöning, J. Anders, H. Augustin, M. Benoit, N. Berger, S. Dittmeier, F. Ehrler, A. Fehr, T. Golling, S. Gonzalez Sevilla, J. Hammerich, A. Herkert, L. Huth, G. Iacobucci, D. Immig, M. Kiehn, J. Kröger, F. Meier, A. Meneses Gonzalez, A. Miucci, L. O. S. Noehte, I. Peric, M. Prathapan, T. Rudzki, R. Schimassek , et al. (7 additional authors not shown)

Abstract: High Voltage Monolithic Active Pixel Sensors (HV-MAPS) are based on a commercial High Voltage CMOS process and collect charge by drift inside a reversely biased diode. HV-MAPS represent a promising technology for future pixel tracking detectors. Two recent developments are presented. The MuPix has a continuous readout and is being developed for the Mu3e experiment whereas the ATLASPix is being dev… ▽ More High Voltage Monolithic Active Pixel Sensors (HV-MAPS) are based on a commercial High Voltage CMOS process and collect charge by drift inside a reversely biased diode. HV-MAPS represent a promising technology for future pixel tracking detectors. Two recent developments are presented. The MuPix has a continuous readout and is being developed for the Mu3e experiment whereas the ATLASPix is being developed for LHC applications with a triggered readout. Both variants have a fully monolithic design including state machines, clock circuitries and serial drivers. Several prototypes and design variants were characterised in the lab and in testbeam campaigns to measure efficiencies, noise, time resolution and radiation tolerance. Results from recent MuPix and ATLASPix prototypes are presented and prospects for future improvements are discussed. △ Less

Submitted 17 February, 2020; originally announced February 2020.

Comments: 10 pages, proceedings, The 28th International Workshop on Vertex Detectors (VERTEX 2019), 13 - 18 Oct 2019, Lopud Island, Croatia

Single-Co Kondo effect in atomic Cu wires on Cu(111)

Authors: Nicolas Néel, Jörg Kröger, Malte Schüler, Bin Shao, Tim O. Wehling, Alexander Kowalski, Giorgio Sangiovanni

Abstract: Linear atomic chains containing a single Kondo atom, Co, and several nonmagnetic atoms, Cu, were assembled atom by atom on Cu(111) with the tip of a scanning tunneling microscope. The resulting one-dimensional wires, Cu$_m$CoCu$_n$ ($0\leq m, n\leq 5$), exhibit a rich evolution of the single-Co Kondo effect with the variation of $m$ and $n$, as inferred from changes in the line shape of the Abriko… ▽ More Linear atomic chains containing a single Kondo atom, Co, and several nonmagnetic atoms, Cu, were assembled atom by atom on Cu(111) with the tip of a scanning tunneling microscope. The resulting one-dimensional wires, Cu$_m$CoCu$_n$ ($0\leq m, n\leq 5$), exhibit a rich evolution of the single-Co Kondo effect with the variation of $m$ and $n$, as inferred from changes in the line shape of the Abrikosov-Suhl-Kondo resonance. The most striking result is the quenching of the resonance in CuCoCu$_2$ and Cu$_2$CoCu$_2$ clusters. State-of-the-art first-principles calculations were performed to unravel possible microscopic origins of the remarkable experimental observations. △ Less

Submitted 11 December, 2019; originally announced December 2019.

Comments: 10 pages, 9 figures

Journal ref: Phys. Rev. Research 2, 023309 (2020)

User Manual for the Corryvreckan Test Beam Data Reconstruction Framework, Version 1.0

Authors: Jens Kröger, Simon Spannagel, Morag Williams

Abstract: Test beam data reconstruction is a task that requires a large amount of flexibility due to the heterogeneous data acquisition environments found in these experiments. Often, detectors with different readout schemes such as triggered, frame-based or data driven approaches are combined in a single setup. In order to correlate these data and to reconstruct particle tracks, a versatile event building… ▽ More Test beam data reconstruction is a task that requires a large amount of flexibility due to the heterogeneous data acquisition environments found in these experiments. Often, detectors with different readout schemes such as triggered, frame-based or data driven approaches are combined in a single setup. In order to correlate these data and to reconstruct particle tracks, a versatile event building algorithm and analysis framework is required. Corryvreckan is a flexible, fast and lightweight test beam data reconstruction framework based on a modular concept of the reconstruction chain. It is written in modern C++ , requires a minimum of external dependencies and is designed to be fully configurable by the user without the need to alter code. This document presents the user manual of the software as of release version 1.0. △ Less

Submitted 2 December, 2019; originally announced December 2019.

Comments: 87 pages, 6 figures

Report number: CLICdp-Note-2019-006

Performance of the large scale HV-CMOS pixel sensor MuPix8

Authors: H. Augustin, N. Berger, C. Blattgerste, S. Dittmeier, F. Ehrler, C Grzesik, J. Hammerich. A. Herkert, L. Huth, D. Immig, A. Kozlinskiy, M. Köppel, J. Kröger, F. Meier, A. Meneses Gonzales, M. Müller, L. Noehte, I. Perić, M. Prathapan, T. Rudzki, R. Schimassek, A. Schöning, I. Sorokin, F. Stieler, A. Tyukin, T. Wagner , et al. (4 additional authors not shown)

Abstract: The Mu3e experiment is searching for the charged lepton flavour violating decay $ μ^+\rightarrow e^+ e^- e^+ $, aiming for an ultimate sensitivity of one in $10^{16}$ decays. In an environment of up to $10^9$ muon decays per second the detector needs to provide precise vertex, time and momentum information to suppress accidental and physics background. The detector consists of cylindrical layers o… ▽ More The Mu3e experiment is searching for the charged lepton flavour violating decay $ μ^+\rightarrow e^+ e^- e^+ $, aiming for an ultimate sensitivity of one in $10^{16}$ decays. In an environment of up to $10^9$ muon decays per second the detector needs to provide precise vertex, time and momentum information to suppress accidental and physics background. The detector consists of cylindrical layers of $50\, μ\text{m}$ thin High Voltage Monolithic Active Pixel Sensors (HV-MAPS) placed in a $1\,\text{T}$ magnetic field. The measurement of the trajectories of the decay particles allows for a precise vertex and momentum reconstruction. Additional layers of fast scintillating fibre and tile detectors provide sub-nanosecond time resolution. The MuPix8 chip is the first large scale prototype, proving the scalability of the HV-MAPS technology. It is produced in the AMS aH18 $180\, \text{nm}$ HV-CMOS process. It consists of three sub-matrices, each providing an untriggered datastream of more than $10\,\text{MHits}/\text{s}$. The latest results from laboratory and testbeam characterisation are presented, showing an excellent performance with efficiencies $>99.6\,\text{\%}$ and a time resolution better than $10\, \text{ns}$ achieved with time walk correction. △ Less

Submitted 22 May, 2019; originally announced May 2019.

Detector Technologies for CLIC

Authors: A. C. Abusleme Hoffman, G. Parès, T. Fritzsch, M. Rothermund, H. Jansen, K. Krüger, F. Sefkow, A. Velyka, J. Schwandt, I. Perić, L. Emberger, C. Graf, A. Macchiolo, F. Simon, M. Szalay, N. van der Kolk, H. Abramowicz, Y. Benhammou, O. Borysov, M. Borysova, A. Joffe, S. Kananov, A. Levy, I. Levy, G. Eigen , et al. (107 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a high-energy high-luminosity linear electron-positron collider under development. It is foreseen to be built and operated in three stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. It offers a rich physics program including direct searches as well as the probing of new physics through a broad set of precision measurements of Stan… ▽ More The Compact Linear Collider (CLIC) is a high-energy high-luminosity linear electron-positron collider under development. It is foreseen to be built and operated in three stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. It offers a rich physics program including direct searches as well as the probing of new physics through a broad set of precision measurements of Standard Model processes, particularly in the Higgs-boson and top-quark sectors. The precision required for such measurements and the specific conditions imposed by the beam dimensions and time structure put strict requirements on the detector design and technology. This includes low-mass vertexing and tracking systems with small cells, highly granular imaging calorimeters, as well as a precise hit-time resolution and power-pulsed operation for all subsystems. A conceptual design for the CLIC detector system was published in 2012. Since then, ambitious R&D programmes for silicon vertex and tracking detectors, as well as for calorimeters have been pursued within the CLICdp, CALICE and FCAL collaborations, addressing the challenging detector requirements with innovative technologies. This report introduces the experimental environment and detector requirements at CLIC and reviews the current status and future plans for detector technology R&D. △ Less

Submitted 7 May, 2019; originally announced May 2019.

Comments: 152 pages, 116 figures; published as CERN Yellow Report Monograph Vol. 1/2019; corresponding editors: Dominik Dannheim, Katja Krüger, Aharon Levy, Andreas Nürnberg, Eva Sicking

Report number: CERN-2019-001

Characterization of SiPM Avalanche Triggering Probabilities

Authors: G. Gallina, F. Retiere, P. Giampa, J. Kroeger, P. Margetak, S. Byrne Mamahit, A. De St. Croix, F. Edaltafar, N. Massacret, M. Ward, G. Zhang

Abstract: Silicon Photo-Multipliers (SiPMs) are detectors sensitive to single photons that are used to detect scintillation and Cherenkov light in a variety of physics and medical-imaging applications. SiPMs measure single photons by amplifying the photo-generated carriers (electrons or holes) via a Geiger-mode avalanche. The Photon Detection Efficiency (PDE) is the combined probability that a photon is abs… ▽ More Silicon Photo-Multipliers (SiPMs) are detectors sensitive to single photons that are used to detect scintillation and Cherenkov light in a variety of physics and medical-imaging applications. SiPMs measure single photons by amplifying the photo-generated carriers (electrons or holes) via a Geiger-mode avalanche. The Photon Detection Efficiency (PDE) is the combined probability that a photon is absorbed in the active volume of the device with a subsequently triggered avalanche. Absorption and avalanche triggering probabilities are correlated since the latter probability depends on where the photon is absorbed. In this paper, we introduce a physics motivated parameterization of the avalanche triggering probability that describes the PDE of a SiPM as a function of its reverse bias voltage, at different wavelengths. This parameterization is based on the fact that in p-on-n SiPMs the induced avalanches are electron-driven in the ultra-violet and near-ultra-violet ranges, while they become increasingly hole-driven towards the near-infra-red range. The model has been successfully applied to characterize two Hamamatsu MPPCs and one FBK SiPM, and it can be extended to other SiPMs. Furthermore, this model provides key insight on the electric field structure within SiPMs, which can explain the limitation of existing devices and be used to optimize the performance of future SiPMs. △ Less

Submitted 11 April, 2019; originally announced April 2019.

Characterization of the Hamamatsu VUV4 MPPCs for nEXO

Authors: G. Gallina, P. Giampa, F. Retiere, J. Kroeger, G. Zhang, M. Ward, P. Margetak, G. Lic, T. Tsang, L. Doria, S. Al Kharusi, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. Blatchford, J. P. Brodsky, E. Brown, T. Brunner, G. F. Cao, L. Cao , et al. (126 additional authors not shown)

Abstract: In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency… ▽ More In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency (PDE) were measured in a dedicated setup at TRIUMF. SiPMs were characterized in the range $163 \text{ } \text{K} \leq \text{T}\leq 233 \text{ } \text{K}$. At an over voltage of $3.1\pm0.2$ V and at $\text{T}=163 \text{ }\text{K}$ we report a number of Correlated Avalanches (CAs) per pulse in the $1 \upmu\text{s}$ interval following the trigger pulse of $0.161\pm0.005$. At the same settings the Dark-Noise (DN) rate is $0.137\pm0.002 \text{ Hz/mm}^{2}$. Both the number of CAs and the DN rate are within nEXO specifications. The PDE of the Hamamatsu VUV4 was measured for two different devices at $\text{T}=233 \text{ }\text{K}$ for a mean wavelength of $189\pm7\text{ nm}$. At $3.6\pm0.2$ V and $3.5\pm0.2$ V of over voltage we report a PDE of $13.4\pm2.6\text{ }\%$ and $11\pm2\%$, corresponding to a saturation PDE of $14.8\pm2.8\text{ }\%$ and $12.2\pm2.3\%$, respectively. Both values are well below the $24\text{ }\%$ saturation PDE advertised by Hamamatsu. More generally, the second device tested at $3.5\pm0.2$ V of over voltage is below the nEXO PDE requirement. The first one instead yields a PDE that is marginally close to meeting the nEXO specifications. This suggests that with modest improvements the Hamamatsu VUV4 MPPCs could be considered as an alternative to the FBK-LF SiPMs for the final design of the nEXO detector. △ Less

Submitted 7 June, 2019; v1 submitted 8 March, 2019; originally announced March 2019.

The Compact Linear Collider (CLIC) - 2018 Summary Report

Authors: The CLIC, CLICdp collaborations, :, T. K. Charles, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, C. Balazs, K. Afanaciev, V. Makarenko, A. Patapenka, I. Zhuk, C. Collette, M. J. Boland, A. C. Abusleme Hoffman, M. A. Diaz, F. Garay, Y. Chi, X. He, G. Pei, S. Pei, G. Shu, X. Wang, J. Zhang , et al. (671 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the… ▽ More The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years. △ Less

Submitted 6 May, 2019; v1 submitted 14 December, 2018; originally announced December 2018.

Comments: 112 pages, 59 figures; published as CERN Yellow Report Monograph Vol. 2/2018; corresponding editors: Philip N. Burrows, Nuria Catalan Lasheras, Lucie Linssen, Marko Petrič, Aidan Robson, Daniel Schulte, Eva Sicking, Steinar Stapnes

Report number: CERN-2018-005-M

Tailoring Intercalant Assemblies at the Graphene-Metal Interface

Authors: Johannes Halle, Nicolas Néel, Jörg Kröger

Abstract: The influence of graphene on the assembly of intercalated material is studied using low-temperature scanning tunneling microscopy. Intercalation of Pt under monolayer graphene on Pt(111) induces a substrate reconstruction that is qualitatively different from the lattice rearrangement induced by metal deposition on Pt(111) and, specifically, the homoepitaxy of Pt. Alkali metals Cs and Li are used a… ▽ More The influence of graphene on the assembly of intercalated material is studied using low-temperature scanning tunneling microscopy. Intercalation of Pt under monolayer graphene on Pt(111) induces a substrate reconstruction that is qualitatively different from the lattice rearrangement induced by metal deposition on Pt(111) and, specifically, the homoepitaxy of Pt. Alkali metals Cs and Li are used as intercalants for monolayer and bilayer graphene on Ru(0001). Atomically resolved topographic data reveal that at elevated alkali metal coverage $(2\times 2)$Cs and $(1\times 1)$Li intercalant structures form with respect to the graphene lattice. △ Less

Submitted 27 February, 2019; v1 submitted 12 December, 2018; originally announced December 2018.

Preparation of graphene bilayers on platinum by sequential chemical vapour deposition

Authors: Johannes Halle, Alexander Mehler, Nicolas Néel, Jörg Kröger

Abstract: A cheap and flexible method is introduced that enables the epitaxial growth of bilayer graphene on Pt(111) by sequential chemical vapour deposition. Extended regions of two stacked graphene sheets are obtained by, first, the thermal decomposition of ethylene and the subsequent formation of graphene. In the second step, a sufficiently thick Pt film buries the first graphene layer and acts as a plat… ▽ More A cheap and flexible method is introduced that enables the epitaxial growth of bilayer graphene on Pt(111) by sequential chemical vapour deposition. Extended regions of two stacked graphene sheets are obtained by, first, the thermal decomposition of ethylene and the subsequent formation of graphene. In the second step, a sufficiently thick Pt film buries the first graphene layer and acts as a platform for the fabrication of the second graphene layer in the third step. A final annealing process then leads to the diffusion of the first graphene sheet to the surface until the bilayer stacking with the second sheet is accomplished. Scanning tunnelling microscopy unravels the successful growth of bilayer graphene and elucidates the origin of moiré patterns. △ Less

Submitted 11 December, 2018; originally announced December 2018.

Finding Places: HCI Platform for Public Participation in Refugees Accommodation Process

Authors: Ariel Noyman, Tobias Holtz, Johannes Kroger, Jorg Rainer Noennig, Kent Larson

Abstract: This paper describes the conception, development and deployment of a novel HCI system for public participation and decision making. This system was applied for the process of allocating refugee accommodation in the City of Hamburg within the FindingPlaces project in 2016. The CityScope a rapid prototy** platform for urban planning and decision making offered a technical solution which was comple… ▽ More This paper describes the conception, development and deployment of a novel HCI system for public participation and decision making. This system was applied for the process of allocating refugee accommodation in the City of Hamburg within the FindingPlaces project in 2016. The CityScope a rapid prototy** platform for urban planning and decision making offered a technical solution which was complemented by a workshop process to facilitate effective interaction of multiple participants and stakeholder groups. This paper presents the origins of CS and the evolution of the tangible user interface approach to urban planning and public participation. It further outlines technical features of the system, including custom hardware and software in use, utilization in real time as well as technical constraints and limitations. Special focus is on the adaptation of the CS technology to the specific demands of Hamburg FP project, whose procedures, processes, and results are reflected. The final section analyzes success factors as well as shortcomings of the approach, and indicates further R&D as well as application scenarios for the CS. △ Less

Submitted 25 November, 2018; originally announced November 2018.

Comments: Procedia Computer Science, 9 pages, 2 figures

Journal ref: Procedia Computer Science Volume 112, 2017, Pages 2463-2472

Understanding and engineering phonon-mediated tunneling into graphene on metal surfaces

Authors: J. Halle, N. Néel, M. Fonin, M. Brandbyge, J. Kröger

Abstract: Metal-intercalated graphene on Ir(111) exhibits phonon signatures in inelastic elec- tron tunneling spectroscopy with strengths that depend on the intercalant. Extraor- dinarily strong graphene phonon signals are observed for Cs intercalation. Li interca- lation likewise induces clearly discriminable phonon signatures, albeit less pronounced than observed for Cs. The signal can be finely tuned by… ▽ More Metal-intercalated graphene on Ir(111) exhibits phonon signatures in inelastic elec- tron tunneling spectroscopy with strengths that depend on the intercalant. Extraor- dinarily strong graphene phonon signals are observed for Cs intercalation. Li interca- lation likewise induces clearly discriminable phonon signatures, albeit less pronounced than observed for Cs. The signal can be finely tuned by the alkali metal coverage and gradually disappears upon increasing the junction conductance from tunneling to con- tact ranges. In contrast to Cs and Li, for Ni-intercalated graphene the phonon signals stay below the detection limit in all transport ranges. Going beyond the conventional two-terminal approach, transport calculations provide a comprehensive understanding of the subtle interplay between the graphene{electrode coupling and the observation of graphene phonon spectroscopic signatures. △ Less

Submitted 29 October, 2018; originally announced October 2018.

Journal ref: Nano Lett. 18, 5697 (2018)

Electron and Cooper pair transport across a single magnetic molecule explored with a scanning tunneling microscope

Authors: J. Brand, S. Gozdzik, N. Néel, J. L. Lado, J. Fernández-Rossier, J. Kröger

Abstract: A scanning tunneling microscope is used to explore the evolution of electron and Cooper pair transport across single Mn-phthalocyanine molecules adsorbed on Pb(111) from tunneling to contact ranges. Normal-metal as well as superconducting tips give rise to a gradual transition of the Bardeen-Cooper-Schrieffer energy gap in the tunneling range into a zero-energy resonance close to and at contact. S… ▽ More A scanning tunneling microscope is used to explore the evolution of electron and Cooper pair transport across single Mn-phthalocyanine molecules adsorbed on Pb(111) from tunneling to contact ranges. Normal-metal as well as superconducting tips give rise to a gradual transition of the Bardeen-Cooper-Schrieffer energy gap in the tunneling range into a zero-energy resonance close to and at contact. Supporting transport calculations show that in the normal-metal - superconductor junctions this resonance reflects the merging of in-gap Yu-Shiba-Rusinov states as well as the onset of Andreev reflection. For the superconductor - superconductor contacts the zero-energy resonance is rationalized in terms of a finite Josephson current that is carried by phase-dependent Andreev and Yu-Shiba-Rusinov levels. △ Less

Submitted 18 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. B 97, 195429 (2018)

Fano description of single-hydrocarbon fluorescence excited by a scanning tunneling microscope

Authors: Jörg Kröger, Benjamin Doppagne, Fabrice Scheurer, Guillaume Schull

Abstract: The detection of fluorescence with submolecular resolution enables the exploration of spatially varying photon yields and vibronic properties at the single-molecule level. By placing individual polycyclic aromatic hydrocarbon molecules into the plasmon cavity formed by the tip of a scanning tunneling microscope and a NaCl-covered Ag(111) surface, molecular light emission spectra are obtained that… ▽ More The detection of fluorescence with submolecular resolution enables the exploration of spatially varying photon yields and vibronic properties at the single-molecule level. By placing individual polycyclic aromatic hydrocarbon molecules into the plasmon cavity formed by the tip of a scanning tunneling microscope and a NaCl-covered Ag(111) surface, molecular light emission spectra are obtained that unravel vibrational progression. In addition, light spectra unveil a signature of the molecule even when the tunneling current is injected well separated from the molecular emitter. This signature exhibits a distance-dependent Fano profile that reflects the subtle interplay between inelastic tunneling electrons, the molecular exciton and localized plasmons in at-distance as well as on-molecule fluorescence. The presented findings open the path to luminescence of a different class of molecules than investigated before and contribute to the understanding of single-molecule luminescence at surfaces in a unified picture. △ Less

Submitted 3 May, 2018; v1 submitted 22 January, 2018; originally announced January 2018.

Comments: 24 pages, 4 figures

Irradiation study of a fully monolithic HV-CMOS pixel sensor design in AMS 180 nm

Authors: H. Augustin, N. Berger, S. Dittmeier, J. Hammerich, A. Herkert, L. Huth, D. Immig, J. Kröger, F. Meier, I. Perić, A. -K. Perrevoort, A. Schöning, D. vom Bruch, D. Wiedner

Abstract: High-Voltage Monolithic Active Pixel Sensors (HV-MAPS) based on the 180 nm HV-CMOS process have been proposed to realize thin, fast and highly integrated pixel sensors. The MuPix7 prototype, fabricated in the commercial AMS H18 process, features a fully integrated on-chip readout, i.e. hit-digitization, zero suppression and data serialization. It is the first fully monolithic HV-CMOS pixel sensor… ▽ More High-Voltage Monolithic Active Pixel Sensors (HV-MAPS) based on the 180 nm HV-CMOS process have been proposed to realize thin, fast and highly integrated pixel sensors. The MuPix7 prototype, fabricated in the commercial AMS H18 process, features a fully integrated on-chip readout, i.e. hit-digitization, zero suppression and data serialization. It is the first fully monolithic HV-CMOS pixel sensor that has been tested for the use in high irradiation environments like HL-LHC. We present results from laboratory and test beam measurements of MuPix7 prototypes irradiated with neutrons (up to $5.0\cdot10^{15}{\,\rm{n}_{\rm{eq}}/cm^2}$) and protons (up to $7.8\cdot 10^{15} \,\rm{protons}/cm^2$) and compare the performance with non-irradiated sensors. Efficiencies well above 90 % at noise rates below 200 Hz per pixel are measured. A time resolution better than 22 ns is measured for all tested settings and sensors, even at the highest irradiation fluences. The data transmission at 1.25 Gbit/s and the on-chip PLL remain fully functional. △ Less

Submitted 5 June, 2018; v1 submitted 11 December, 2017; originally announced December 2017.

Beyond conventional photon-number detection with click detectors

Authors: Johannes Kröger, Thomas Ahrens, Jan Sperling, Werner Vogel, Heinrich Stolz, Boris Hage

Abstract: Photon-number measurements are a fundamental technique for the discrimination and characterization of quantum states of light. Beyond the abilities of state-of-the-art devices, we present measurements with an array of 100 avalanche photodiodes exposed to photon-numbers ranging from well below to significantly above one photon per diode. Despite each single diode only discriminating between zero an… ▽ More Photon-number measurements are a fundamental technique for the discrimination and characterization of quantum states of light. Beyond the abilities of state-of-the-art devices, we present measurements with an array of 100 avalanche photodiodes exposed to photon-numbers ranging from well below to significantly above one photon per diode. Despite each single diode only discriminating between zero and non-zero photon-numbers we are able to extract characteristic information about the quantum state. We demonstrate a vast enhancement of the applicable intensity range by two orders of magnitude relative to the standard application of such devices. It turns out that the probabilistic map** of arbitrary photon-numbers on a finite number of registered clicks is not per se a disadvantage compared with true photon counters. Such detector arrays can bridge the gap between single-photon and linear detection, by directly using the recorded data, without the need of elaborate data reconstruction methods. △ Less

Submitted 3 June, 2017; originally announced June 2017.

Comments: 4 figures

Adsorption and desorption of hydrogen at nonpolar GaN(1-100) surfaces: Kinetics and impact on surface vibrational and electronic properties

Authors: L. Lymperakis, J. Neugebauer, M. Himmerlich, S. Krischok, M. Rink, J. Kröger, V. M. Polyakov

Abstract: The adsorption of hydrogen at nonpolar GaN(1-100) surfaces and its impact on the electronic and vibrational properties is investigated using surface electron spectroscopy in combination with density functional theory (DFT) calculations. For the surface mediated dissociation of H2 and the subsequent adsorption of H, an energy barrier of 0.55 eV has to be overcome. The calculated kinetic surface pha… ▽ More The adsorption of hydrogen at nonpolar GaN(1-100) surfaces and its impact on the electronic and vibrational properties is investigated using surface electron spectroscopy in combination with density functional theory (DFT) calculations. For the surface mediated dissociation of H2 and the subsequent adsorption of H, an energy barrier of 0.55 eV has to be overcome. The calculated kinetic surface phase diagram indicates that the reaction is kinetically hindered at low pressures and low temperatures. At higher temperatures ab-initio thermodynamics show, that the H-free surface is energetically favored. To validate these theoretical predictions experiments at room temperature and under ultrahigh vacuum conditions were performed. They reveal that molecular hydrogen does not dissociatively adsorb at the GaN(1-100) surface. Only activated atomic hydrogen atoms attach to the surface. At temperatures above 820 K, the attached hydrogen gets desorbed. The adsorbed hydrogen atoms saturate the dangling bonds of the gallium and nitrogen surface atoms and result in an inversion of the Ga-N surface dimer buckling. The signatures of the Ga-H and N-H vibrational modes on the H-covered surface have experimentally been identified and are in good agreement with the DFT calculations of the surface phonon modes. Both theory and experiment show that H adsorption results in a removal of occupied and unoccupied intragap electron states of the clean GaN(1-100) surface and a reduction of the surface upward band bending by 0.4 eV. The latter mechanism largely reduces surface electron depletion. △ Less

Submitted 2 February, 2017; originally announced February 2017.

Screening of electron-phonon coupling in graphene on Ir(111)

Authors: M. Endlich, A. Molina-Sánchez, L. Wirtz, J. Kröger

Abstract: The phonon dispersion of graphene on Ir(111) has been determined by means of angle-resolved inelastic electron scattering and density functional calculations. Kohn anomalies of the highest optical-phonon branches are observed at the $Γ$ and K point of the surface Brillouin zone. At K the Kohn anomaly is weaker than observed from pristine graphene and graphite. This observation is rationalized in t… ▽ More The phonon dispersion of graphene on Ir(111) has been determined by means of angle-resolved inelastic electron scattering and density functional calculations. Kohn anomalies of the highest optical-phonon branches are observed at the $Γ$ and K point of the surface Brillouin zone. At K the Kohn anomaly is weaker than observed from pristine graphene and graphite. This observation is rationalized in terms of a decrease of the electron-phonon coupling due to screening of graphene electron correlations by the metal substrate. △ Less

Submitted 29 October, 2013; v1 submitted 24 October, 2013; originally announced October 2013.

Local Gating of an Ir(111) Surface Resonance by Graphene Islands

Authors: S. J. Altenburg, J. Kröger, T. O. Wehling, B. Sachs, A. I. Lichtenstein, R. Berndt

Abstract: The influence of graphene islands on the electronic structure of the Ir(111) surface is investigated. Scanning tunneling spectroscopy (STS) indicates the presence of a two-dimensional electron gas with a binding energy of -160meV and an effective mass of -0.18m_e underneath single-layer graphene on the Ir(111) surface. Density functional calculations reveal that the STS features are predominantly… ▽ More The influence of graphene islands on the electronic structure of the Ir(111) surface is investigated. Scanning tunneling spectroscopy (STS) indicates the presence of a two-dimensional electron gas with a binding energy of -160meV and an effective mass of -0.18m_e underneath single-layer graphene on the Ir(111) surface. Density functional calculations reveal that the STS features are predominantly due to a holelike surface resonance of the Ir(111) substrate. Nanometer-sized graphene islands act as local gates, which shift and confine the surface resonance. △ Less

Submitted 9 May, 2012; originally announced May 2012.

Comments: Accepted by Physical Review Letters, Feb 17, 2012

Two-Site Kondo Effect in Atomic Chains

Authors: N. Néel, R. Berndt, J. Kröger, T. O. Wehling, A. I. Lichtenstein, M. I. Katsnelson

Abstract: Linear CoCu_nCo clusters on Cu(111) are fabricated by means of atomic manipulation. They represent a two-site Kondo system with tunable interaction. Scanning tunneling spectroscopy reveals oscillations of the Kondo temperature T_K with the number n of Cu atoms for n>=3. Density functional calculations show that the Ruderman-Kittel-Kasuya-Yosida interaction mediated by the Cu chains causes the osci… ▽ More Linear CoCu_nCo clusters on Cu(111) are fabricated by means of atomic manipulation. They represent a two-site Kondo system with tunable interaction. Scanning tunneling spectroscopy reveals oscillations of the Kondo temperature T_K with the number n of Cu atoms for n>=3. Density functional calculations show that the Ruderman-Kittel-Kasuya-Yosida interaction mediated by the Cu chains causes the oscillations. Calculations find ferromagnetic and antiferromagnetic interaction for n=1 and 2, respectively. Both interactions lead to a decrease of T_K as experimentally observed. △ Less

Submitted 17 May, 2011; originally announced May 2011.

Comments: 5 pages, 3 figures

Kondo effect of a Co atom on Cu(111) in contact with an Fe tip

Authors: N. Neel, J. Kroeger, R. Berndt

Abstract: Single Co atoms, which exhibit a Kondo effect on Cu(111), are contacted with Cu and Fe tips in a low-temperature scanning tunneling microscope. With Fe tips, the Kondo effect persists with the Abrikosov-Suhl resonance significantly broadened. In contrast, for Cu-covered W tips, the resonance width remains almost constant throughout the tunneling and contact ranges. The distinct changes of the line… ▽ More Single Co atoms, which exhibit a Kondo effect on Cu(111), are contacted with Cu and Fe tips in a low-temperature scanning tunneling microscope. With Fe tips, the Kondo effect persists with the Abrikosov-Suhl resonance significantly broadened. In contrast, for Cu-covered W tips, the resonance width remains almost constant throughout the tunneling and contact ranges. The distinct changes of the line width are interpreted in terms of modifications of the Co d state occupation owing to hybridization with the tip apex atoms. △ Less

Submitted 25 November, 2010; originally announced November 2010.

Comments: 4 pages, 3 figures

Nucleation of cracks in a brittle sheet

Authors: Cristiano L. Dias, Jens Kroger, Daniel Vernon, Martin Grant

Abstract: We use molecular dynamics to study the nucleation of cracks in a two dimensional material without pre-existing cracks. We study models with zero and non-zero shear modulus. In both situations the time required for crack formation obeys an Arrhenius law, from which the energy barrier and pre-factor are extracted for different system sizes. For large systems, the characteristic time of rupture is… ▽ More We use molecular dynamics to study the nucleation of cracks in a two dimensional material without pre-existing cracks. We study models with zero and non-zero shear modulus. In both situations the time required for crack formation obeys an Arrhenius law, from which the energy barrier and pre-factor are extracted for different system sizes. For large systems, the characteristic time of rupture is found to decrease with system size, in agreement with classical Weibull theory. In the case of zero shear modulus, the energy opposing rupture is identified with the breakage of a single atomic layer. In the case of non-zero shear modulus, thermally activated fracture can only be studied within a reasonable time at very high strains. In this case the energy barrier involves the stretching of bonds within several layers, accounting for a much higher barrier compared to the zero shear modulus case. This barrier is understood within adiabatic simulations. △ Less

Submitted 14 June, 2009; originally announced June 2009.

Evolution of unoccupied resonance during the synthesis of a silver dimer on Ag(111)

Authors: Alexander Sperl, Joerg Kroeger, Richard Berndt, Andreas Franke, Eckhard Pehlke

Abstract: Silver dimers were fabricated on Ag(111) by single-atom manipulation using the tip of a cryogenic scanning tunnelling microscope. An unoccupied electronic resonance was observed to shift toward the Fermi level with decreasing atom-atom distance as monitored by spatially resolved scanning tunnelling spectroscopy. Density functional calculations were used to analyse the experimental observations a… ▽ More Silver dimers were fabricated on Ag(111) by single-atom manipulation using the tip of a cryogenic scanning tunnelling microscope. An unoccupied electronic resonance was observed to shift toward the Fermi level with decreasing atom-atom distance as monitored by spatially resolved scanning tunnelling spectroscopy. Density functional calculations were used to analyse the experimental observations and revealed that the coupling between the adsorbed atoms is predominantly direct rather than indirect via the Ag(111) substrate. △ Less

Submitted 30 March, 2009; originally announced March 2009.

Comments: 9 pages, 3 figures

Surface reconstruction and energy gap of superconducting V3Si(001)

Authors: N. Hauptmann, M. Becker, J. Kroeger, R. Berndt

Abstract: A yet unknown surface reconstruction of V3Si(001), which is most likely induced by carbon, is used to investigate the quasi-particle energy gap at the atomic scale by a cryogenic scanning tunneling microscope. The width of the gap was virtually not altered at and close to carbon impurities, nor did it change at different sites of the reconstructed surface lattice. A remarkable modification of th… ▽ More A yet unknown surface reconstruction of V3Si(001), which is most likely induced by carbon, is used to investigate the quasi-particle energy gap at the atomic scale by a cryogenic scanning tunneling microscope. The width of the gap was virtually not altered at and close to carbon impurities, nor did it change at different sites of the reconstructed surface lattice. A remarkable modification of the spectroscopic signature of the gap was induced, however, upon moving the tip of the microscope into controlled contact with the superconductor. Spectroscopy of the resulting normal-metal -- superconductor junction indicated the presence of Andreev reflections. △ Less

Submitted 19 March, 2009; originally announced March 2009.

Comments: 8 pages, 7 figures

Spectrum and Wave Functions of Excited States in Lattice Gauge Theory

Authors: H. Kroger, A. Hosseinizadeh, J. F. Laprise, J. Kroger

Abstract: We suggest a new method to compute the spectrum and wave functions of excited states. We construct a stochastic basis of Bargmann link states, drawn from a physical probability density distribution and compute transition amplitudes between stochastic basis states. From such transition matrix we extract wave functions and the energy spectrum. We apply this method to $U(1)_{2+1}$ lattice gauge the… ▽ More We suggest a new method to compute the spectrum and wave functions of excited states. We construct a stochastic basis of Bargmann link states, drawn from a physical probability density distribution and compute transition amplitudes between stochastic basis states. From such transition matrix we extract wave functions and the energy spectrum. We apply this method to $U(1)_{2+1}$ lattice gauge theory. As a test we compute the energy spectrum, wave functions and thermodynamical functions of the electric Hamiltonian and compare it with analytical results. We find excellent agreement. We observe scaling of energies and wave functions in the variable of time. We also present first results on a small lattice for the full Hamiltonian including the magnetic term. △ Less

Submitted 17 February, 2009; originally announced February 2009.

Comments: Lattice 2008 conference

Journal ref: PoS LATTICE2008:235,2008

Scanning tunneling microscopy and kinetic Monte Carlo investigation of Cesium superlattices on Ag(111)

Authors: M. Ziegler, J. Kroeger, R. Berndt, A. Filinov, M. Bonitz

Abstract: Cesium adsorption structures on Ag(111) were characterized in a low-temperature scanning tunneling microscopy experiment. At low coverages, atomic resolution of individual Cs atoms is occasionally suppressed in regions of an otherwise hexagonally ordered adsorbate film on terraces. Close to step edges Cs atoms appear as elongated protrusions along the step edge direction. At higher coverages, Cs… ▽ More Cesium adsorption structures on Ag(111) were characterized in a low-temperature scanning tunneling microscopy experiment. At low coverages, atomic resolution of individual Cs atoms is occasionally suppressed in regions of an otherwise hexagonally ordered adsorbate film on terraces. Close to step edges Cs atoms appear as elongated protrusions along the step edge direction. At higher coverages, Cs superstructures with atomically resolved hexagonal lattices are observed. Kinetic Monte Carlo simulations model the observed adsorbate structures on a qualitative level. △ Less

Submitted 15 October, 2008; v1 submitted 14 October, 2008; originally announced October 2008.

Comments: 8 pages, 7 figures

Controlling the Kondo Effect in CoCu_n Clusters Atom by Atom

Authors: N. Neel, J. Kroeger, R. Berndt, T. Wehling, A. Lichtenstein, M. I. Katsnelson

Abstract: Clusters containing a single magnetic impurity were investigated by scanning tunneling microscopy, spectroscopy, and ab initio electronic structure calculations. The Kondo temperature of a Co atom embedded in Cu clusters on Cu(111) exhibits a non-monotonic variation with the cluster size. Calculations model the experimental observations and demonstrate the importance of the local and anisotropic… ▽ More Clusters containing a single magnetic impurity were investigated by scanning tunneling microscopy, spectroscopy, and ab initio electronic structure calculations. The Kondo temperature of a Co atom embedded in Cu clusters on Cu(111) exhibits a non-monotonic variation with the cluster size. Calculations model the experimental observations and demonstrate the importance of the local and anisotropic electronic structure for correlation effects in small clusters. △ Less

Submitted 1 October, 2008; originally announced October 2008.

Comments: 4 pages, 4 figures

Quantized Conductance of a Single Magnetic Atom

Authors: N. Neel, J. Kroeger, R. Berndt

Abstract: A single Co atom adsorbed on Cu(111) or on ferromagnetic Co islands is contacted with non-magnetic W or ferromagnetic Ni tips in a scanning tunneling microscope. When the Co atom bridges two non-magnetic electrodes conductances of 2e^2/h are found. With two ferromagnetic electrodes a conductance of e^2/h is observed which may indicate fully spin-polarized transport. A single Co atom adsorbed on Cu(111) or on ferromagnetic Co islands is contacted with non-magnetic W or ferromagnetic Ni tips in a scanning tunneling microscope. When the Co atom bridges two non-magnetic electrodes conductances of 2e^2/h are found. With two ferromagnetic electrodes a conductance of e^2/h is observed which may indicate fully spin-polarized transport. △ Less

Submitted 21 September, 2008; originally announced September 2008.

Comments: 3 pages, 2 figures

Quantum modulation of the Kondo resonance of Co adatoms on Cu/Co/Cu(100)

Authors: Takashi Uchihashi, Jianwei Zhang, Joerg Kroeger, Richard Berndt

Abstract: Low-temperature scanning tunneling spectroscopy reveals that the Kondo temperature T_K of Co atoms adsorbed on Cu/Co/Cu(100) multilayers varies between 60 K and 134 K as the Cu film thickness decreases from 20 to 5 atomic layers. The observed change of T_K is attributed to a variation of the density of states at the Fermi level ρ_F induced by quantum well states confined to the Cu film. A model… ▽ More Low-temperature scanning tunneling spectroscopy reveals that the Kondo temperature T_K of Co atoms adsorbed on Cu/Co/Cu(100) multilayers varies between 60 K and 134 K as the Cu film thickness decreases from 20 to 5 atomic layers. The observed change of T_K is attributed to a variation of the density of states at the Fermi level ρ_F induced by quantum well states confined to the Cu film. A model calculation based on the quantum oscillations of ρ_F at the belly and the neck of the Cu Fermi surface reproduces most of the features in the measured variation of T_K. △ Less

Submitted 1 June, 2008; v1 submitted 18 April, 2008; originally announced April 2008.

Comments: 5 pages, Nature of the changes: After our submission, Brovko et al. reported ab initio calculations addressing the exchange interaction of exactly the system we have investigated experimentally (arXiv:0804.3298). We have modified the manuscript to stress the significance of our paper that promises experimental feasibility of such a prediction

Rotation of C60 in a single-molecule contact

Authors: N. Neel, L. Limot, J. Kroeger, R. Berndt

Abstract: The orientation of individual C60 molecules adsorbed on Cu(100) is reversibly switched when the tip of a scanning tunneling microscope is approached to contact the molecule. The probability of switching rises sharply upon displacing the tip beyond a threshold. A mechanical mechanism is suggested to induce the rotation of the molecule. The orientation of individual C60 molecules adsorbed on Cu(100) is reversibly switched when the tip of a scanning tunneling microscope is approached to contact the molecule. The probability of switching rises sharply upon displacing the tip beyond a threshold. A mechanical mechanism is suggested to induce the rotation of the molecule. △ Less

Submitted 7 October, 2007; originally announced October 2007.

Comments: 4 pages, 4 figures

Unoccupied states of individual silver clusters and chains on Ag(111)

Authors: A. Sperl, J. Kroeger, N. Neel, H. Jensen, R. Berndt, A. Franke, E. Pehlke

Abstract: Size-selected silver clusters on Ag(111) were fabricated with the tip of a scanning tunneling microscope. Unoccupied electron resonances give rise to image contrast and spectral features which shift toward the Fermi level with increasing cluster size. Linear assemblies exhibit higher resonance energies than equally sized compact assemblies. Density functional theory calculations reproduce the ob… ▽ More Size-selected silver clusters on Ag(111) were fabricated with the tip of a scanning tunneling microscope. Unoccupied electron resonances give rise to image contrast and spectral features which shift toward the Fermi level with increasing cluster size. Linear assemblies exhibit higher resonance energies than equally sized compact assemblies. Density functional theory calculations reproduce the observed energies and enable an assignment of the resonances to hybridized atomic 5s and 5p orbitals with silver substrate states. △ Less

Submitted 18 September, 2007; originally announced September 2007.

Comments: 9 pages, 8 figures

Universality of Level Spacing Distributions in Classical Chaos

Authors: J. F. Laprise, J. Kroger, H. Kroger, P. Y. St. -Louis, L. J. Dube, E. Endress, A. Burra, R. Zomorrodi, G. Melkonyan, K. J. M. Moriarty

Abstract: We suggest that random matrix theory applied to a classical action matrix can be used in classical physics to distinguish chaotic from non-chaotic behavior. We consider the 2-D stadium billiard system as well as the 2-D anharmonic and harmonic oscillator. By unfolding of the spectrum of such matrix we compute the level spacing distribution, the spectral auto-correlation and spectral rigidity. We… ▽ More We suggest that random matrix theory applied to a classical action matrix can be used in classical physics to distinguish chaotic from non-chaotic behavior. We consider the 2-D stadium billiard system as well as the 2-D anharmonic and harmonic oscillator. By unfolding of the spectrum of such matrix we compute the level spacing distribution, the spectral auto-correlation and spectral rigidity. We observe Poissonian behavior in the integrable case and Wignerian behavior in the chaotic case. We present numerical evidence that the action matrix of the stadium billiard displays GOE behavior and give an explanation for it. The findings present evidence for universality of level fluctuations - known from quantum chaos - also to hold in classical physics. △ Less

Submitted 16 February, 2007; originally announced February 2007.

Journal ref: Phys. Lett. A 372 (2008) 4574-4577

Conductance and Kondo effect of a controlled single atom contact

Authors: N. Neel, J. Kroeger, L. Limot, K. Palotas, W. A. Hofer, R. Berndt

Abstract: The tip of a low-temperature scanning tunneling microscope is brought into contact with individual Kondo impurities (cobalt atoms) adsorbed on a Cu(100) surface. A smooth transition from the tunneling regime to a point contact with a conductance of $G\approx\text{G}_0$ occurs. Spectroscopy in the contact regime, {\it i. e.}, at currents in a $μ\text{A}$ range was achieved. A modified line shape… ▽ More The tip of a low-temperature scanning tunneling microscope is brought into contact with individual Kondo impurities (cobalt atoms) adsorbed on a Cu(100) surface. A smooth transition from the tunneling regime to a point contact with a conductance of $G\approx\text{G}_0$ occurs. Spectroscopy in the contact regime, {\it i. e.}, at currents in a $μ\text{A}$ range was achieved. A modified line shape is observed indicating a significant change of the Kondo temperature $T_{\text{K}}$ at contact. Model calculations indicate that the proximity of the tip shifts the cobalt $d$-band and thus affects $T_{\text{K}}$. △ Less

Submitted 16 October, 2006; originally announced October 2006.

Comments: 4 pages, 3 figures

Controlled Contact to a C60 Molecule

Authors: N. Neel, J. Kroger, L. Limot, T. Frederiksen, M. Brandbyge, R. Berndt

Abstract: The conductance of C60 on Cu(100) is investigated with a low-temperature scanning tunneling microscope. At the transition from tunneling to the contact regime the conductance of C60 adsorbed with a pentagon-hexagon bond rises rapidly to 0.25 conductance quanta G0. An abrupt conductance jump to G0 is observed upon further decreasing the distance between the instrument's tip and the surface. Ab-in… ▽ More The conductance of C60 on Cu(100) is investigated with a low-temperature scanning tunneling microscope. At the transition from tunneling to the contact regime the conductance of C60 adsorbed with a pentagon-hexagon bond rises rapidly to 0.25 conductance quanta G0. An abrupt conductance jump to G0 is observed upon further decreasing the distance between the instrument's tip and the surface. Ab-initio calculations within density functional theory and non-equilibrium Green's function techniques explain the experimental data in terms of the conductance of an essentially undeformed C60. From a detailed analysis of the crossover from tunneling to contact we conclude that the conductance in this region is strongly affected by structural fluctuations which modulate the tip-molecule distance. △ Less

Submitted 22 August, 2006; originally announced August 2006.

Comments: 4 pages, 3 figures

Journal ref: Phys. Rev. Lett. 98, 065502 (2007)

Adsorption geometry of Cu(111)-Cs studied by scanning tunneling microscopy

Authors: Th. von Hofe, J. Kroeger, R. Berndt

Abstract: Using scanning tunneling microscopy at low temperatures we investigated the adsorbate system Cu(111)-Cs for various cesium coverages. At low coverages we observe a hexagonally ordered Cs adsorption layer with a mutual adsorbate distance of 1.1 nm. This distance is discussed in terms of a commensurate adsorption superstructure which is stabilized by long-range adsorbate interactions mediated by C… ▽ More Using scanning tunneling microscopy at low temperatures we investigated the adsorbate system Cu(111)-Cs for various cesium coverages. At low coverages we observe a hexagonally ordered Cs adsorption layer with a mutual adsorbate distance of 1.1 nm. This distance is discussed in terms of a commensurate adsorption superstructure which is stabilized by long-range adsorbate interactions mediated by Cu(111) surface state electrons. Intermediate coverages are characterized by incommensurate superstructures which are rotated with respect to the substrate lattice. The rotation behavior at 9K follows a general trend which is consistent with models of epitaxial rotation. With increasing coverage the adsorption layers are found to rotate toward alignment with the substrate. △ Less

Submitted 21 March, 2006; originally announced March 2006.

Comments: 8 pages, 4 figures

Molecular Orbital Shift of Perylenetetracarboxylic-Dianhydride

Authors: J. Kroeger, H. Jensen, R. Berndt, R. Rurali, N. Lorente

Abstract: Using low-temperature scanning tunneling microscopy we find that perylenetetracarboxylic-dianhydride on Au(788) exhibits three coexisting adsorption phases. Single-molecule tunneling spectroscopy reveals orbital energies, which differ in the different adsorption phases. Density functional theory calculations associate the experimentally observed submolecular corrugation to the spatial distributi… ▽ More Using low-temperature scanning tunneling microscopy we find that perylenetetracarboxylic-dianhydride on Au(788) exhibits three coexisting adsorption phases. Single-molecule tunneling spectroscopy reveals orbital energies, which differ in the different adsorption phases. Density functional theory calculations associate the experimentally observed submolecular corrugation to the spatial distribution of the second-to-lowest unoccupied molecular orbital. We tentatively attribute the orbital shifts to a varying number of hydrogen bonds. △ Less

Submitted 1 June, 2005; originally announced June 2005.

Comments: 4 pages, 4 figures