-
Evidence of directional structural superlubricity and Lévy flights in a van der Waals heterostructure
Authors:
Maxime Le Ster,
Paweł Krukowski,
Maciej Rogala,
Paweł Dabrowski,
Iaroslav Lutsyk,
Klaudia Toczek,
Krzysztof Podlaski,
Tefvik O. Mendeş,
Francesca Genuzio,
Andrea Locatelli,
Guan Bian,
Tai-Chang Chiang,
Simon A. Brown,
Paweł J. Kowalczyk
Abstract:
Structural superlubricity is a special frictionless contact in which two crystals are in incommensurate arrangement such that relative in-plane translation is associated with vanishing energy barrier crossing. So far, it has been realized in multilayer graphene and other van der Waals two-dimensional crystals with hexagonal or triangular crystalline symmetries, leading to isotropic frictionless co…
▽ More
Structural superlubricity is a special frictionless contact in which two crystals are in incommensurate arrangement such that relative in-plane translation is associated with vanishing energy barrier crossing. So far, it has been realized in multilayer graphene and other van der Waals two-dimensional crystals with hexagonal or triangular crystalline symmetries, leading to isotropic frictionless contacts. Directional structural superlubricity, to date unrealized in two-dimensional systems, is possible when the reciprocal lattices of the two crystals coincide in one direction only. Here, we evidence directional structural superlubricity a $α$-bismuthene/graphite van der Waals system, manifested by spontaneous hop** of the islands over hundreds of nanometres at room temperature, resolved by low-energy electron microscopy and supported by registry simulations. Statistical analysis of individual and collective $α$-bismuthene islands populations reveal a heavy-tailed distribution of the hop** lengths and sticking times indicative of Lévy flight dynamics, largely unobserved in massive condensed-matter systems.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Nano-ARPES investigation of twisted bilayer tungsten disulfide
Authors:
Giovanna Feraco,
Oreste De Luca,
Przemysław Przybysz,
Homayoun Jafari,
Oleksandr Zheliuk,
Ying Wang,
Philip Schädlich,
Pavel Dudin,
José Avila,
Jianting Ye,
Thomas Seyller,
Paweł Dąbrowski,
Paweł Kowalczyk,
Jagoda Sławińska,
Petra Rudolf,
Antonija Grubišić-Čabo
Abstract:
The diverse and intriguing phenomena observed in twisted bilayer systems, such as graphene and transition metal dichalcogenides, prompted new questions about the emergent effects that they may host. However, the practical challenge of realizing these structures on a scale large enough for spectroscopic investigation, remains a significant hurdle, resulting in a scarcity of direct measurements of t…
▽ More
The diverse and intriguing phenomena observed in twisted bilayer systems, such as graphene and transition metal dichalcogenides, prompted new questions about the emergent effects that they may host. However, the practical challenge of realizing these structures on a scale large enough for spectroscopic investigation, remains a significant hurdle, resulting in a scarcity of direct measurements of the electronic band structure of twisted transition metal dichalcogenide bilayers. Here we present a systematic nanoscale angle-resolved photoemission spectroscopy investigation of bulk, single layer, and twisted bilayer WS2 with a small twist angle of 4.4°. The experimental results are compared with theoretical calculations based on density functional theory along the high-symmetry directions Γ-K and Γ-M. Surprisingly, the electronic band structure measurements suggest a structural relaxation occurring at 4.4° twist angle, and formation of large, untwisted bilayer regions.
△ Less
Submitted 7 December, 2023;
originally announced December 2023.
-
Fourier Transform-Based Post-Processing Drift Compensation and Calibration Method for Scanning Probe Microscopy
Authors:
Maxime Le Ster,
Sławomir Pawłowski,
Iaroslav Lutsyk,
Paweł Janusz Kowalczyk
Abstract:
Scanning probe microscopy (SPM) is ubiquitous in nanoscale science allowing the observation of features in real space down to the angstrom resolution. The scanning nature of SPM, wherein a sharp tip rasters the surface during which a physical setpoint is maintained via a control feedback loop, often implies that the image is subject to drift effects, leading to distortion of the resulting image. W…
▽ More
Scanning probe microscopy (SPM) is ubiquitous in nanoscale science allowing the observation of features in real space down to the angstrom resolution. The scanning nature of SPM, wherein a sharp tip rasters the surface during which a physical setpoint is maintained via a control feedback loop, often implies that the image is subject to drift effects, leading to distortion of the resulting image. While there are \emph{in-operando} methods to compensate for the drift, correcting the residual linear drift in obtained images is often neglected. In this paper, we present a reciprocal space-based technique to compensate the linear drift in atomically-resolved scanning probe microscopy images without distinction of the fast and slow scanning directions; furthermore this method does not require the set of SPM images obtained for the different scanning directions. Instead, the compensation is made possible by the a priori knowledge of the lattice parameters. The method can also be used to characterize and calibrate the SPM instrument.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Moiré plane wave expansion model for scanning tunneling microscopy simulations of incommensurate two-dimensional materials
Authors:
Maxime Le Ster,
Paweł Dabrowski,
Paweł Krukowski,
Maciej Rogala,
Iaroslav Lutsyk,
Wojciech Ry{ś},
Tobias Märkl,
Simon A. Brown,
Jagoda Sławińska,
Krisztián Palotás,
Paweł J. Kowalczyk
Abstract:
Incommensurate heterostructures of two-dimensional (2D) materials, despite their attractive electronic behaviour, are challenging to simulate because of the absence of translation symmetry. Experimental investigations of these structures often employ scanning tunneling microscopy (STM), however there is to date no comprehensive theory to simulate and predict a STM image in such systems. In this pa…
▽ More
Incommensurate heterostructures of two-dimensional (2D) materials, despite their attractive electronic behaviour, are challenging to simulate because of the absence of translation symmetry. Experimental investigations of these structures often employ scanning tunneling microscopy (STM), however there is to date no comprehensive theory to simulate and predict a STM image in such systems. In this paper, we present a new approach to simulate STM images in arbitrary van der Waals (vdW) heterostructures, using a moiré plane wave expansion model (MPWEM). Contrary to computationally demanding conventional methods such as density functional theory that in practice require periodic boundaries, our method only relies on the description of the noninteracting STM images of the separate materials, and on a narrow set of intuitive semi-empirical parameters, successfully simulating experimental STM images down to angstrom-scale details. We illustrate and benchmark the model using selected vdW 2D systems composed of structurally and electronically distinct crystals. The MPWEM, generating reliable STM images within seconds, can serve as an initial prediction tool, which can prove to be useful in the investigation of vdW heterostructures, offers an avenue towards fast and reliable prediction methods in the growing field of twistronics.
△ Less
Submitted 12 October, 2023; v1 submitted 10 October, 2023;
originally announced October 2023.
-
Robust Zeeman-type band splitting in sliding ferroelectrics
Authors:
Homayoun Jafari,
Evgenii Barts,
Przemysław Przybysz,
Karma Tenzin,
Paweł J. Kowalczyk,
Paweł Dabrowski,
Jagoda Sławińska
Abstract:
Transition metal dichalcogenides exhibit giant spin-orbit coupling, and intriguing spin-valley effects, which can be harnessed through proximity in van der Waals (vdW) heterostructures. Remarkably, due to the prismatic crystal field, the Zeeman-type band splitting of valence bands reach values of several hundreds of meV. While this effect is suppressed in the commonly studied hexagonal (H)-stacked…
▽ More
Transition metal dichalcogenides exhibit giant spin-orbit coupling, and intriguing spin-valley effects, which can be harnessed through proximity in van der Waals (vdW) heterostructures. Remarkably, due to the prismatic crystal field, the Zeeman-type band splitting of valence bands reach values of several hundreds of meV. While this effect is suppressed in the commonly studied hexagonal (H)-stacked bilayers due to the presence of inversion symmetry, the recent discovery of sliding ferroelectricity in rhombohedral (R-)stacked MX$_2$ bilayers (M=Mo, W; X=S, Se) suggests that the Zeeman effect could be present in these non-centrosymmetric configurations, making it even more intriguing to investigate how the spin-resolved bands would evolve during the phase transition. Here, we perform density functional theory calculations complemented by symmetry analysis to unveil the evolution of ferroelectricity during sliding and the behavior of Zeeman splitting along the transition path. While the evolution of the out-of-plane component of the electric polarization vector resembles the conventional ferroelectric transition, we observe significant in-plane components parallel to the sliding direction, reaching their maximum at the intermediate state. Moreover, we demonstrate that the R-stacked bilayers exhibit persistent Zeeman-type band splitting throughout the transition path, allowed by the lack of inversion symmetry. Further analysis of different stacking configurations generated by sliding along various directions confirms that the Zeeman effect in MX$_2$, primarily arising from the polarity of prismatic ligand coordination of the metal atom, is remarkably robust and completely governs the spin polarization of bands, independently of the sliding direction. This resilience promises robust spin transport in vdW based MX$_2$ bilayers, opening new opportunities for ferroelectric spintronics.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
Designing Explainable Predictive Machine Learning Artifacts: Methodology and Practical Demonstration
Authors:
Giacomo Welsch,
Peter Kowalczyk
Abstract:
Prediction-oriented machine learning is becoming increasingly valuable to organizations, as it may drive applications in crucial business areas. However, decision-makers from companies across various industries are still largely reluctant to employ applications based on modern machine learning algorithms. We ascribe this issue to the widely held view on advanced machine learning algorithms as "bla…
▽ More
Prediction-oriented machine learning is becoming increasingly valuable to organizations, as it may drive applications in crucial business areas. However, decision-makers from companies across various industries are still largely reluctant to employ applications based on modern machine learning algorithms. We ascribe this issue to the widely held view on advanced machine learning algorithms as "black boxes" whose complexity does not allow for uncovering the factors that drive the output of a corresponding system. To contribute to overcome this adoption barrier, we argue that research in information systems should devote more attention to the design of prototypical prediction-oriented machine learning applications (i.e., artifacts) whose predictions can be explained to human decision-makers. However, despite the recent emergence of a variety of tools that facilitate the development of such artifacts, there has so far been little research on their development. We attribute this research gap to the lack of methodological guidance to support the creation of these artifacts. For this reason, we develop a methodology which unifies methodological knowledge from design science research and predictive analytics with state-of-the-art approaches to explainable artificial intelligence. Moreover, we showcase the methodology using the example of price prediction in the sharing economy (i.e., on Airbnb).
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
On the 1$^1Σ^{+}_{\mathrm{u}}$ electronic state in strontium dimer
Authors:
Jacek Szczepkowski,
Wlodzimierz Jastrzebski,
Anna Grochola,
Pawel Kowalczyk
Abstract:
The laser technique of polarisation labelling of levels has been used to study the excited 1$^1Σ^{+}_{\mathrm{u}}$ state of $^{88}$Sr$_2$, in most part heavily perturbed by the neighbouring electronic states. By observation of completely resolved rovibronic spectra we have determined positions of 2556 spectral lines originating from the labelled levels in the ground X$^1Σ^{+}_{\mathrm{g}}$ state a…
▽ More
The laser technique of polarisation labelling of levels has been used to study the excited 1$^1Σ^{+}_{\mathrm{u}}$ state of $^{88}$Sr$_2$, in most part heavily perturbed by the neighbouring electronic states. By observation of completely resolved rovibronic spectra we have determined positions of 2556 spectral lines originating from the labelled levels in the ground X$^1Σ^{+}_{\mathrm{g}}$ state and terminating on levels of the perturbed complex. The experimental results are confronted with the existing theoretical predictions.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Excited electronic states of Sr$_2$: ab initio predictions and experimental observation of the $2^1Σ^{+}_{u}$ state
Authors:
Jacek Szczepkowskia,
Marcin Gronowski,
Anna Grochola,
Włodzimierz Jastrzebski,
Michał Tomza,
Paweł Kowalczyk
Abstract:
Despite its apparently simple nature with four valence electrons, the strontium dimer constitutes a challenge for modern electronic structure theory. Here we focus on excited electronic states of Sr$_2$, which we investigate theoretically up to 25000 cm$^{-1}$ above the ground state, to guide and explain new spectroscopic measurements. In particular, we focus on potential energy curves for the…
▽ More
Despite its apparently simple nature with four valence electrons, the strontium dimer constitutes a challenge for modern electronic structure theory. Here we focus on excited electronic states of Sr$_2$, which we investigate theoretically up to 25000 cm$^{-1}$ above the ground state, to guide and explain new spectroscopic measurements. In particular, we focus on potential energy curves for the $1^1Σ^{+}_{u}$, $2^1Σ^{+}_{u}$, $1^1Π_{u}$, $2^1Π_{u}$, and $1^1Δ_{u}$ states computed using several variants of advanced \textit{ab initio} methods to benchmark them. In addition, a new experimental study of the excited $2^1Σ^{+}_{u}$ state using polarisation labelling spectroscopy is presented, which extends knowledge of this state to high vibrational levels, where perturbation by higher electronic states is observed. The available experimental observations are compared with the theoretical predictions and help to assess the accuracy and limitations of employed theoretical models. The present results pave the way for future more accurate theoretical and experimental spectroscopic studies.
△ Less
Submitted 21 March, 2023;
originally announced March 2023.
-
Graphene on quartz modified with rhenium oxide as a semitransparent electrode for organic electronic
Authors:
Paweł Krukowski,
Michał Piskorski,
Ruslana Udovytska,
Dorota A. Kowalczyk,
Iaroslav Lutsyk,
Maciej Rogala,
Paweł Dąbrowski,
Witold Kozłowski,
Beata Łuszczyńska,
Jarosław Jung,
Jacek Ulański,
Krzysztof Matuszek,
Aleksandra Nadolska,
Przemysław Przybysz,
Wojciech Ryś,
Klaudia Toczek,
Rafał Dunal,
Patryk Krempiński,
Justyna Czerwińska,
Maxime Le Ster,
Marcin Skulimowski,
Paweł J. Kowalczyk
Abstract:
Our research shows that commercially available graphene on quartz modified with rhenium oxide meets the requirements for its use as a conductive and transparent anode in optoelectronic devices. The cluster growth of rhenium oxide enables an increase in the work function of graphene by 1.3 eV up to 5.2 eV, which guarantees an appropriate adjustment to the energy levels of the organic semiconductors…
▽ More
Our research shows that commercially available graphene on quartz modified with rhenium oxide meets the requirements for its use as a conductive and transparent anode in optoelectronic devices. The cluster growth of rhenium oxide enables an increase in the work function of graphene by 1.3 eV up to 5.2 eV, which guarantees an appropriate adjustment to the energy levels of the organic semiconductors used in OLED devices.
△ Less
Submitted 10 March, 2023; v1 submitted 9 March, 2023;
originally announced March 2023.
-
Influence of Structural Defects on Charge Density Waves in 1T-TaS2
Authors:
I. Lutsyk,
K. Szalowski,
P. Krukowski,
P. Dabrowski,
M. Rogala,
W. Kozlowski,
M. Le Ster,
M. Piskorski,
D. A. Kowalczyk,
W. Rys,
R. Dunal,
A. Nadolska,
K. Toczek,
P. Przybysz,
E. Lacinska,
J. Binder,
A. Wysmolek,
N. Olszowska,
J. J. Kolodziej,
M. Gmitra,
T. Hattori,
Y. Kuwahara,
G. Bian,
T. -C. Chiang,
P. J. Kowalczyk
Abstract:
The influence of intrinsic defects of 1T-TaS2 on charge density waves (CDW) is studied using scanning tunneling microscopy and spectroscopy (STM, STS), angle-resolved photoelectron spectroscopy (ARPES), and density functional theory (DFT). We identify several types of structural defects and find that most have a local character limited to the single CDW site, with single exception which effectivel…
▽ More
The influence of intrinsic defects of 1T-TaS2 on charge density waves (CDW) is studied using scanning tunneling microscopy and spectroscopy (STM, STS), angle-resolved photoelectron spectroscopy (ARPES), and density functional theory (DFT). We identify several types of structural defects and find that most have a local character limited to the single CDW site, with single exception which effectively behaves as a dopant, leading to band bending and affecting multiple neighboring sites. While only one type of defect can be observed by STM topographic imaging, all defects are easily resolved by local density of states (LDOS) map** with STS. We correlate atomically-resolved STM periodicity of defect-free 1T-TaS2 to top sulfur atoms and introduce tiling of the surface using equiangular hexagon. DFT calculations (with included Coulomb interactions) are used to investigate the electronic structure by introducing sulfur vacancy or substituting sulfur with oxygen. The sulfur vacancy is characterized by metallic properties and is identified as an origin of one of observed experimentally defects. Whereas in the case of the latter, the oxidation of 1T-TaS2 is found to result in the loss of magnetic properties expected in defect-free material.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Edge States of α-Bismuthene Nanostructures
Authors:
Sara Salehitaleghani,
Tobias Maerkl,
Pawel J Kowalczyk,
Maxime Le Ster,
Xiaoxiong Wang,
Guang Bian,
Tai-Chang Chiang,
Simon A Brown
Abstract:
We present a systematic investigation of the edge states of two-dimensional α-bismuthene (α-Bi) structures self-assembled on HOPG substrates, using scanning tunnelling microscopy and scanning tunnelling spectroscopy. The measurements are carried out for 3ML, 5ML and 7ML thick Bi structures. Our spectroscopy studies reveal clear features at the edges of the 5ML and 7ML thick structures, and the pos…
▽ More
We present a systematic investigation of the edge states of two-dimensional α-bismuthene (α-Bi) structures self-assembled on HOPG substrates, using scanning tunnelling microscopy and scanning tunnelling spectroscopy. The measurements are carried out for 3ML, 5ML and 7ML thick Bi structures. Our spectroscopy studies reveal clear features at the edges of the 5ML and 7ML thick structures, and the positions of the edge states (ESs) coincide with the topographical step edges. In contrast, in 3ML structures the ESs appear to be absent and instead new states are sometimes observed, far from the topographical edge. These states are associated with a moiré pattern and result from strain-induced modulation of the topology. Our observations demonstrate the impact on the edge states of coupling to adjacent structures.
△ Less
Submitted 1 January, 2023;
originally announced January 2023.
-
Towards a Taxonomy for the Use of Synthetic Data in Advanced Analytics
Authors:
Peter Kowalczyk,
Giacomo Welsch,
Frédéric Thiesse
Abstract:
The proliferation of deep learning techniques led to a wide range of advanced analytics applications in important business areas such as predictive maintenance or product recommendation. However, as the effectiveness of advanced analytics naturally depends on the availability of sufficient data, an organization's ability to exploit the benefits might be restricted by limited data or likewise data…
▽ More
The proliferation of deep learning techniques led to a wide range of advanced analytics applications in important business areas such as predictive maintenance or product recommendation. However, as the effectiveness of advanced analytics naturally depends on the availability of sufficient data, an organization's ability to exploit the benefits might be restricted by limited data or likewise data access. These challenges could force organizations to spend substantial amounts of money on data, accept constrained analytics capacities, or even turn into a showstopper for analytics projects. Against this backdrop, recent advances in deep learning to generate synthetic data may help to overcome these barriers. Despite its great potential, however, synthetic data are rarely employed. Therefore, we present a taxonomy highlighting the various facets of deploying synthetic data for advanced analytics systems. Furthermore, we identify typical application scenarios for synthetic data to assess the current state of adoption and thereby unveil missed opportunities to pave the way for further research.
△ Less
Submitted 5 December, 2022;
originally announced December 2022.
-
Study of excited electronic states of the $^{39}$KCs molecule correlated with the K($4^2$S)+Cs($5^2$D) asymptote: experiment and theory
Authors:
Jacek Szczepkowski,
Anna Grochola,
Wlodzimierz Jastrzebski,
Pawel Kowalczyk,
Romain Vexiau,
Nadia Bouloufa-Maafa,
Olivier Dulieu
Abstract:
Using the polarisation labelling spectroscopy, we performed the detailed analysis of the level structure of excited electronic states of the $^{39}$KCs molecule in the excitation energy interval between 17500~cm$^{-1}$ and 18600~cm$^{-1}$ above the $v=0$ level of the $X^1Σ^+$ ground state. We prove that the observed states are strongly coupled by spin-orbit interaction above 18200~cm$^{-1}$, as ma…
▽ More
Using the polarisation labelling spectroscopy, we performed the detailed analysis of the level structure of excited electronic states of the $^{39}$KCs molecule in the excitation energy interval between 17500~cm$^{-1}$ and 18600~cm$^{-1}$ above the $v=0$ level of the $X^1Σ^+$ ground state. We prove that the observed states are strongly coupled by spin-orbit interaction above 18200~cm$^{-1}$, as manifested by numerous perturbations in the recorded spectra. The spectra are interpreted with the guidance of accurate electronic structure calculations on KCs, including potential energy curves, transition electric dipole moments, and representation of the spin-orbit interaction with a quasi-diabatic effective Hamiltonian approach. The agreement between theory and experiment is found remarkable, clearly discriminating among the available theoretical data. This study confirms the accuracy of the polarisation labelling spectroscopy to analyse highly-excited electronic molecular states which present a dense level structure.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
The C(2)$^1Π_u$ state in Rb$_2$. Observation and deperturbation
Authors:
Asen Pashov,
Pawel Kowalczyk,
Jacek Szczepkowski,
Wlodzimierz Jastrzebski
Abstract:
We report a systematic study of the C(2)$^1Π_u$ electronic state in rubidium dimer, observed in polarization labelling spectroscopy experiment through the C $\leftarrow$ X$^{1}Σ^{+}_{g}$ transitions recorded under rotational resolution in two isotopologues $^{85}$Rb$_2$ and $^{85}$Rb$^{87}$Rb. Regularity of the vibrational progressions was distorted by numerous interactions with the surrounding 2…
▽ More
We report a systematic study of the C(2)$^1Π_u$ electronic state in rubidium dimer, observed in polarization labelling spectroscopy experiment through the C $\leftarrow$ X$^{1}Σ^{+}_{g}$ transitions recorded under rotational resolution in two isotopologues $^{85}$Rb$_2$ and $^{85}$Rb$^{87}$Rb. Regularity of the vibrational progressions was distorted by numerous interactions with the surrounding 2$^1Σ^{+}_{\mathrm{u}}$, 2$^3Π_{\mathrm{u}}$ and 3$^3Σ^{+}_{\mathrm{u}}$ states. Deperturbation was performed by coupled-channels analysis taking into account spin-orbit and rotational interactions. Potential energy curves and parameters describing the off-diagonal matrix elements were determined as functions of internuclear distance. About 3000 line frequencies from the present study are reproduced with a standard deviation of 0.07 cm$^{-1}$, in agreement with the experimental accuracy. Along with this, the model is consistent with all high resolution experimental data on the involved electronic states, available in the literature.
△ Less
Submitted 27 May, 2022;
originally announced May 2022.
-
Observation of Unpinned Two-Dimensional Dirac States in Antimony Single Layers with Phosphorene Structure
Authors:
Qiangsheng Lu,
Matthew Snyder,
Kyle Y. Chen,
Xiaoqian Zhang,
Jacob Cook,
Duy Tung Nguyen,
P. V. Sreenivasa Reddy,
Tay-Rong Chang,
Pawel J. Kowalczyk,
Simon A. Brown,
Tai-Chang Chiang,
Shengyuan A. Yang,
Guang Bian
Abstract:
The discovery of graphene has stimulated enormous interest in two-dimensional (2D) electron gas with linear band structure. 2D Dirac materials possess many intriguing physical properties such as high carrier mobility and zero-energy Landau level thanks to the relativistic dispersion and chiral spin/pseudospin texture. 2D Dirac states discovered so far are exclusively pinned at high-symmetry points…
▽ More
The discovery of graphene has stimulated enormous interest in two-dimensional (2D) electron gas with linear band structure. 2D Dirac materials possess many intriguing physical properties such as high carrier mobility and zero-energy Landau level thanks to the relativistic dispersion and chiral spin/pseudospin texture. 2D Dirac states discovered so far are exclusively pinned at high-symmetry points of the Brillouin zone, for example, surface Dirac states at $\overlineΓ$ in topological insulators Bi$_2$Se(Te)$_3$ and Dirac cones at $K$ and $K'$ in graphene. In this work, we report the realization of 2D Dirac states at generic $k$-points in antimony atomic layers with phosphorene structure ($i.e.$ $α$-antimonene). The unpinned nature enables versatile ways to control the locations of the Dirac points in momentum space. In addition, dispersions around the unpinned Dirac points exhibit intrinsically anisotropic behaviors due to the reduced symmetry of generic momentum points. These properties make the $α$-antimonene films a promising platform for exploring interesting physics in unpinned 2D Dirac fermions that are distinct from the conventional Dirac states in graphene.
△ Less
Submitted 18 October, 2021; v1 submitted 10 October, 2021;
originally announced October 2021.
-
Pseudomagnetic fields and strain engineering: graphene on GaN nanowires
Authors:
Jakub Kierdaszuk,
Paweł Dąbrowski,
Maciej Rogala,
Paweł Krukowski,
Aleksandra Przewłoka,
Aleksandra Krajewska,
Wawrzyniec Kaszub,
Marta Sobanska,
Zbigniew R. Zytkiewicz,
Vitaly Z. Zubialevich,
Paweł J. Kowalczyk,
Andrzej Wysmołek,
Johannes Binder,
Aneta Drabińska
Abstract:
Gallium nitride nanowire and nanorod substrates with different morphology are prospective platforms allowing to control the local strain distribution in graphene films top of them, resulting in an induction of pseudomagnetic fields. Atomic force microscopy measurements performed in a HybriD mode complemented by scanning electron microscopy allow for a detailed visualization of the strain distribut…
▽ More
Gallium nitride nanowire and nanorod substrates with different morphology are prospective platforms allowing to control the local strain distribution in graphene films top of them, resulting in an induction of pseudomagnetic fields. Atomic force microscopy measurements performed in a HybriD mode complemented by scanning electron microscopy allow for a detailed visualization of the strain distribution on graphene surface. Graphene in direct contact with supporting regions is tensile strained, while graphene located in-between is characterized by lower strain. Characteristic tensile strained wrinkles also appear in the areas between the supporting regions. A detailed analysis of the strain distribution shows positive correlation between strain gradient and distances between borders of supporting regions. These results are confirmed by Raman spectroscopy by analysis the D' band intensity, which is affected by an enhancement of intravalley scattering. Furthermore, scanning tunneling spectroscopy shows a local modification of the density of states near the graphene wrinkle and weak localization measurements indicate the enhancement of pseudomagnetic field-induced scattering. Therefore, we show that nanowire and nanorod substrates provide strain engineering and induction of pseudomagnetic fields in graphene. The control of graphene morphology by a modification of distances between supporting regions is promising for both further fundamental research and the exploration of innovative ways to fabricate pseudomagnetic field-based devices like sensors or filters.
△ Less
Submitted 31 July, 2021;
originally announced August 2021.
-
Stability of fixed points in an approximate solution of the spring-mass running model
Authors:
Zofia Wróblewska,
Piotr Kowalczyk,
Łukasz Płociniczak
Abstract:
We consider a classical spring-mass model of human running which is built upon an inverted elastic pendulum. Based on our previous results concerning asymptotic solutions for large spring constant (or small angle of attack), we construct analytical approximations of solutions in the considered model. The model itself consists of two sets of differential equations - one set describes the motion of…
▽ More
We consider a classical spring-mass model of human running which is built upon an inverted elastic pendulum. Based on our previous results concerning asymptotic solutions for large spring constant (or small angle of attack), we construct analytical approximations of solutions in the considered model. The model itself consists of two sets of differential equations - one set describes the motion of the centre of mass of a runner in contact with the ground (support phase), and the second set describes the phase of no contact with the ground (flight phase). By appropriately concatenating asymptotic solutions for the two phases we are able to reduce the dynamics to a one-dimensional apex to apex return map. We find sufficient conditions for this map to have a unique stable fixed point. By numerical continuation of fixed points with respect to energy, we find a transcritical bifurcation in our model system.
△ Less
Submitted 15 May, 2021;
originally announced May 2021.
-
On the 3$^{1}Π_{u}$ state in caesium dimer
Authors:
Jacek Szczepkowski,
Anna Grochola,
Wlodzimierz Jastrzebski,
Pawel Kowalczyk
Abstract:
Polarisation labelling spectroscopy technique was employed to study the 3$^{1}Π_{u}$ state of Cs$_2$ molecule. The main equlibrium constants are $T_e=20684.60$cm$^{-1}$, $ω_e=30.61$cm$^{-1}$ and $R_e=5.27$Å. Vibrational levels $v=4-35$ of the 3$^{1}Π_{u}$ state were found to be subject to strong perturbations by the neighbouring electronic states. Energies of 3094 rovibronic levels of the perturbe…
▽ More
Polarisation labelling spectroscopy technique was employed to study the 3$^{1}Π_{u}$ state of Cs$_2$ molecule. The main equlibrium constants are $T_e=20684.60$cm$^{-1}$, $ω_e=30.61$cm$^{-1}$ and $R_e=5.27$Å. Vibrational levels $v=4-35$ of the 3$^{1}Π_{u}$ state were found to be subject to strong perturbations by the neighbouring electronic states. Energies of 3094 rovibronic levels of the perturbed complex were determined.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Spike-adding and reset-induced canard cycles in adaptive integrate and fire models
Authors:
Mathieu Desroches,
Piotr Kowalczyk,
Serafim Rodrigues
Abstract:
We study a class of planar integrate and fire (IF) models called adaptive integrate and fire (AIF) models, which possesses an adaptation variable on top of membrane potential, and whose subthreshold dynamics is piecewise linear (PWL). These AIF models therefore have two reset conditions, which enable bursting dynamics to emerge for suitable parameter values. Such models can be thought of as hybrid…
▽ More
We study a class of planar integrate and fire (IF) models called adaptive integrate and fire (AIF) models, which possesses an adaptation variable on top of membrane potential, and whose subthreshold dynamics is piecewise linear (PWL). These AIF models therefore have two reset conditions, which enable bursting dynamics to emerge for suitable parameter values. Such models can be thought of as hybrid dynamical systems. We consider a particular slow dynamics within AIF models and prove the existence of bursting cycles with $N$ resets, for any integer $N$. Furthermore, we study the transition between $N$- and $(N+1)$-reset cycles upon vanishingly small parameter variations and prove (for $N=2$) that such transitions are organised by canard cycles. Finally, using numerical continuation we compute branches of bursting cycles, including canard-explosive branches, in these AIF models, by suitably recasting the periodic problem as a two-point boundary-value problem.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Absolute numbering of asymptotic vibrational levels of diatomic molecules from cold physics experiments
Authors:
Asen Pashov,
Pawel Kowalczyk,
Wlodzimierz Jastrzebski
Abstract:
We present a simple method for determination of absolute vibrational numbering of isolated near dissociation levels in diatomic molecules, usually observed in cold physics experiments. The method is based on the isotope shift and works even when energies of only two levels from one isotopologue and one level from another isotopologue have been measured. It is demonstrated on data from recently rep…
▽ More
We present a simple method for determination of absolute vibrational numbering of isolated near dissociation levels in diatomic molecules, usually observed in cold physics experiments. The method is based on the isotope shift and works even when energies of only two levels from one isotopologue and one level from another isotopologue have been measured. It is demonstrated on data from recently reported precise measurements of binding energies of levels lying close to the dissociation limits in ultracold Yb2, CsYb, RbSr and RbYb molecules. Its predictions agree with these of much more elaborate multi-isotope potential curve fitting.
PACS numbers: 31.50.Bc, 33.20.Kf, 33.20.Vq, 33.50.Dq
△ Less
Submitted 30 December, 2019;
originally announced December 2019.
-
Realisation of Symmetry Enforced Two-Dimensional Dirac Fermions in Nonsymmorphic $α$-Bismuthene
Authors:
Pawel J. Kowalczyk,
Simon A. Brown,
Tobias Maerkl,
Qiangsheng Lu,
Ching-Kai Chiu,
Ying Liu,
Shengyuan A. Yang,
Xiaoxiong Wang,
Ilona Zasada,
Francesca Genuzio,
T. Onur Menteş,
Andrea Locatelli,
Tai-Chang Chiang,
Guang Bian
Abstract:
Two-dimensional (2D) Dirac-like electron gases have attracted tremendous research interest ever since the discovery of free-standing graphene. The linear energy dispersion and non-trivial Berry phase play the pivotal role in the remarkable electronic, optical, mechanical and chemical properties of 2D Dirac materials. The known 2D Dirac materials are gapless only within certain approximations, for…
▽ More
Two-dimensional (2D) Dirac-like electron gases have attracted tremendous research interest ever since the discovery of free-standing graphene. The linear energy dispersion and non-trivial Berry phase play the pivotal role in the remarkable electronic, optical, mechanical and chemical properties of 2D Dirac materials. The known 2D Dirac materials are gapless only within certain approximations, for example, in the absence of SOC. Here we report a route to establishing robust Dirac cones in 2D materials with nonsymmorphic crystal lattice. The nonsymmorphic symmetry enforces Dirac-like band dispersions around certain high-symmetry momenta in the presence of SOC. Through $μ$-ARPES measurements we observe Dirac-like band dispersions in $α$-bismuthene. The nonsymmorphic lattice symmetry is confirmed by $μ$-LEED and STM. Our first-principles simulations and theoretical topological analysis demonstrate the correspondence between nonsymmorphic symmetry and Dirac states. This mechanism can be straightforwardly generalized to other nonsymmorphic materials. The results open the door for the search of symmetry enforced Dirac fermions in the vast uncharted world of nonsymmorphic 2D materials.
△ Less
Submitted 20 June, 2019;
originally announced June 2019.
-
The RbSr $^2Σ^+$ ground state investigated via spectroscopy of hot & ultracold molecules
Authors:
Alessio Ciamei,
Jacek Szczepkowski,
Alex Bayerle,
Vincent Barbé,
Lukas Reichsöllner,
Slava M. Tzanova,
Chun-Chia Chen,
Benjamin Pasquiou,
Anna Grochola,
Pawel Kowalczyk,
Wlodzimierz Jastrzebski,
Florian Schreck
Abstract:
We report on spectroscopic studies of hot and ultracold RbSr molecules, and combine the results in an analysis that allows us to fit a potential energy curve (PEC) for the X(1)$^2Σ^+$ ground state bridging the short-to-long-range domains. The ultracold RbSr molecules are created in a $μ$K sample of Rb and Sr atoms and probed by two-colour photoassociation spectroscopy. The data yield the long-rang…
▽ More
We report on spectroscopic studies of hot and ultracold RbSr molecules, and combine the results in an analysis that allows us to fit a potential energy curve (PEC) for the X(1)$^2Σ^+$ ground state bridging the short-to-long-range domains. The ultracold RbSr molecules are created in a $μ$K sample of Rb and Sr atoms and probed by two-colour photoassociation spectroscopy. The data yield the long-range dispersion coefficients $C_6$ and $C_8$, along with the total number of supported bound levels. The hot RbSr molecules are created in a $1000 \,$K gas mixture of Rb and Sr in a heat-pipe oven and probed by thermoluminescence and laser-induced fluorescence spectroscopy. We compare the hot molecule data with spectra we simulated using previously published PECs determined by three different ab-initio theoretical methods. We identify several band heads corresponding to radiative decay from the B(2)$^2Σ^+$ state to the deepest bound levels of X(1)$^2Σ^+$. We determine a mass-scaled high-precision model for X(1)$^2Σ^+$ by fitting all data using a single fit procedure. The corresponding PEC is consistent with all data, thus spanning short-to-long internuclear distances and bridging an energy gap of about 75% of the potential well depth, still uncharted by any experiment. We benchmark ab-initio PECs against our results, and give the PEC fit parameters for both X(1)$^2Σ^+$ and B(2)$^2Σ^+$ states. As first outcomes of our analysis, we calculate the $s$-wave scattering properties for all stable isotopic combinations and corroborate the locations of Fano-Feshbach resonances between alkali Rb and closed-shell Sr atoms recently observed [Barbé et al., Nat. Phys., 2018, DOI:10.1038/s41567-018-0169-x]. These results should greatly contribute to the generation of ultracold alkali$-$alkaline-earth dimers, whose applications range from quantum simulation to quantum chemistry.
△ Less
Submitted 22 June, 2018;
originally announced June 2018.
-
Global Complex Roots and Poles Finding Algorithm Based on Phase Analysis for Propagation and Radiation Problems
Authors:
Piotr Kowalczyk
Abstract:
A flexible and effective algorithm for complex roots and poles finding is presented. A wide class of analytic functions can be analyzed, and any arbitrarily shaped search region can be considered. The method is very simple and intuitive. It is based on sampling a function at the nodes of a regular mesh, and on the analysis of the function phase. As a result, a set of candidate regions is created a…
▽ More
A flexible and effective algorithm for complex roots and poles finding is presented. A wide class of analytic functions can be analyzed, and any arbitrarily shaped search region can be considered. The method is very simple and intuitive. It is based on sampling a function at the nodes of a regular mesh, and on the analysis of the function phase. As a result, a set of candidate regions is created and then the roots/poles are verified using a discretized Cauchy's argument principle. The accuracy of the results can be improved by the application of a self-adaptive mesh. The effectiveness of the presented technique is supported by numerical tests involving different types of structures, where electromagnetic waves are guided and radiated. The results are verified, and the computational efficiency of the method is examined.
△ Less
Submitted 25 July, 2018; v1 submitted 18 June, 2018;
originally announced June 2018.
-
Experimental and theoretical study of the B(2)$^2 Σ^+ \rightarrow$ X(1)$^2 Σ^+$ system in the KSr molecule
Authors:
Jacek Szczepkowski,
Anna Grochola,
Paweł Kowalczyk,
Olivier Dulieu,
Romain Guerout,
Piotr S. Żuchowski,
Włodzimierz Jastrzebski
Abstract:
Spectral bands for the B(2)$^{2}Σ^{+}\rightarrow$ X(1)$^{2}Σ^{+}$ electronic transition in the doubly-polar open-shell KSr molecule are recorded at moderate resolution using the thermoluminescence technique. The spectra are simulated using three kinds of advanced electronic structure calculations, allowing for an assessment of their accuracy on one hand, and for the derivation of fundamental spect…
▽ More
Spectral bands for the B(2)$^{2}Σ^{+}\rightarrow$ X(1)$^{2}Σ^{+}$ electronic transition in the doubly-polar open-shell KSr molecule are recorded at moderate resolution using the thermoluminescence technique. The spectra are simulated using three kinds of advanced electronic structure calculations, allowing for an assessment of their accuracy on one hand, and for the derivation of fundamental spectroscopic constants of the X(1)$^{2}Σ^{+}$ KSr ground state and the excited electronic state B(2)$^{2}Σ^{+}$, on the other hand. These results should facilitate further studies aiming at creating ultracold bosonic or fermionic KSr molecules.
△ Less
Submitted 15 February, 2018;
originally announced February 2018.
-
On hp-Streamline Diffusion and Nitsche schemes for the Relativistic Vlasov-Maxwell System
Authors:
Mohammad Asadzadeh,
Piotr Kowalczyk,
Christoffer Standar
Abstract:
We study stability and convergence of $hp$-streamline diffusion (SD) finite element, and Nitsche's schemes for the three dimensional, relativistic (3 spatial dimension and 3 velocities), time dependent Vlasov-Maxwell system and Maxwell's equations, respectively. For the $hp$ scheme for the Vlasov-Maxwell system, assuming that the exact solution is in the Sobolev space $H^{s+1}(Ω)$, we derive globa…
▽ More
We study stability and convergence of $hp$-streamline diffusion (SD) finite element, and Nitsche's schemes for the three dimensional, relativistic (3 spatial dimension and 3 velocities), time dependent Vlasov-Maxwell system and Maxwell's equations, respectively. For the $hp$ scheme for the Vlasov-Maxwell system, assuming that the exact solution is in the Sobolev space $H^{s+1}(Ω)$, we derive global {\sl a priori} error bound of order ${\mathcal O}(h/p)^{s+1/2}$, where $h (= \max_K h_K)$ is the mesh parameter and $p (= \max_K p_K)$ is the spectral order. This estimate is based on the local version with $h_K=\mbox{ diam } K$ being the diameter of the {\sl phase-space-time} element $K$ and $p_K$ is the spectral order (the degree of approximating finite element polynomial) for $K$. As for the Nitsche's scheme, by a simple calculus of the field equations, first we convert the Maxwell's system to an {\sl elliptic type} equation. Then, combining the Nitsche's method for the spatial discretization with a second order time scheme, we obtain optimal convergence of ${\mathcal O}(h^2+k^2)$, where $h$ is the spatial mesh size and $k$ is the time step. Here, as in the classical literature, the second order time scheme requires higher order regularity assumptions. Numerical justification of the results, in lower dimensions, is presented and is also the subject of a forthcoming computational work [20].
△ Less
Submitted 1 November, 2017;
originally announced November 2017.
-
Engineering Multiple Topological Phases in Nanoscale Van der Waals Heterostructures: Realisation of $α$-Antimonene
Authors:
Tobias Märkl,
Pawel J. Kowalczyk,
Maxime Le Ster,
Ishan Vardhan Mahajan,
Harry Pirie,
Zuned Ahmed,
Guang Bian,
Xiaoxiong Wang,
Tai-Chang Chiang,
Simon Anthony Brown
Abstract:
Van der Waals heterostructures have recently been identified as providing many opportunities to create new two-dimensional materials, and in particular to produce materials with topologically interesting states. Here we show that it is possible to create such heterostructures with multiple topological phases in a single nanoscale island. We discuss their growth within the framework of diffusion-li…
▽ More
Van der Waals heterostructures have recently been identified as providing many opportunities to create new two-dimensional materials, and in particular to produce materials with topologically interesting states. Here we show that it is possible to create such heterostructures with multiple topological phases in a single nanoscale island. We discuss their growth within the framework of diffusion-limited aggregation, the formation of moiré patterns due to the differing crystallographies of the materials comprising the heterostructure, and the potential to engineer both the electronic structure as well as local variations of topological order. In particular we show that it is possible to build islands which include both the hexagonal $β$- and rectangular $α$-forms of antimonene, on top of the topological insulator $α$-bismuthene. This is the first experimental realisation of $α$-antimonene, and we show that it is a topologically non-trivial material in the quantum spin Hall class.
△ Less
Submitted 27 August, 2017;
originally announced August 2017.
-
Mimetization of the elastic properties of cancellous bone via a parameterized cellular material
Authors:
Lucas Colabella,
Adrián Cisilino,
Guillaume Haiat,
Piotr Kowalczyk
Abstract:
Bone tissue mechanical properties and trabecular microarchitecture are the main factors that determine the biomechanical properties of cancellous bone. Artificial cancellous microstructures, typically described by a reduced number of geometrical parameters, can be designed to obtain a mechanical behavior mimicking that of natural bone. In this work, we assess the ability of the parameterized micro…
▽ More
Bone tissue mechanical properties and trabecular microarchitecture are the main factors that determine the biomechanical properties of cancellous bone. Artificial cancellous microstructures, typically described by a reduced number of geometrical parameters, can be designed to obtain a mechanical behavior mimicking that of natural bone. In this work, we assess the ability of the parameterized microstructure introduced by Kowalczyk (2006) to mimic the elastic response of cancellous bone. Artificial microstructures are compared with actual bone samples in terms of elasticity matrices and their symmetry classes. The capability of the parameterized microstructure to combine the dominant isotropic, hexagonal, tetragonal and orthorhombic symmetry classes in the proportions present in the cancellous bone is shown. Based on this finding, two optimization approaches are devised to find the geometrical parameters of the artificial microstructure that better mimics the elastic response of a target natural bone specimen: a Sequential Quadratic Programming algorithm that minimizes the norm of the difference between the elasticity matrices, and a Pattern Search algorithm that minimizes the difference between the symmetry class decompositions. The pattern search approach is found to produce the best results. The performance of the method is demonstrated via analyses for 146 bone samples.
△ Less
Submitted 5 July, 2017;
originally announced July 2017.
-
A novel route to a Hopf-bifurcation scenario in switched systems with dead zone
Authors:
P. Kowalczyk
Abstract:
Planar switched system with dead-zone are analyzed. In particular, we consider the effects of perturbation of the linear control law from purely positional to position-velocity control. This type of perturbation leads to a novel Hopf-like discontinuity induced bifurcation. We show that this bifurcation leads to the creation of small scale limit cycle attractors, which scale as the square root of t…
▽ More
Planar switched system with dead-zone are analyzed. In particular, we consider the effects of perturbation of the linear control law from purely positional to position-velocity control. This type of perturbation leads to a novel Hopf-like discontinuity induced bifurcation. We show that this bifurcation leads to the creation of small scale limit cycle attractors, which scale as the square root of the bifurcation parameter. We note that a Hopf-like bifurcation analyzed in non-smooth systems is characterized by a linear scaling law. We then investigate numerically a planar switched system with positional feedback law, dead-zone and time delay in the switching function. Using the same parameter values as for the switched system without delay in the switching function, we show numerically a Hopf-like bifurcation scenario which matches qualitatively and quantitatively with the scenario analyzed for the non-delayed system.
△ Less
Submitted 26 May, 2016;
originally announced May 2016.
-
Gyroidal nanoporous carbons - Adsorption and separation properties explored using computer simulations
Authors:
S. Furmaniak,
P. A. Gauden,
A. P. Terzyk,
P. Kowalczyk
Abstract:
Adsorption and separation properties of gyroidal nanoporous carbons (GNCs) - a new class of exotic nanocarbon materials are studied for the first time using hyper parallel tempering Monte Carlo Simulation technique. Porous structure of GNC models is evaluated by the method proposed by Bhattacharya and Gubbins. All the studied structures are strictly microporous. Next, mechanisms of Ar adsorption a…
▽ More
Adsorption and separation properties of gyroidal nanoporous carbons (GNCs) - a new class of exotic nanocarbon materials are studied for the first time using hyper parallel tempering Monte Carlo Simulation technique. Porous structure of GNC models is evaluated by the method proposed by Bhattacharya and Gubbins. All the studied structures are strictly microporous. Next, mechanisms of Ar adsorption are described basing on the analysis of adsorption isotherms, enthalpy plots, the values of Henry's constants, $α_{s}$ and adsorption potential distribution plots. It is concluded that below pore diameters ca. 0.8 nm, primary micropore filling process dominates. For structures possessing larger micropores, primary and secondary micropore filling mechanism is observed. Finally, the separation properties of GNC toward CO$_2$/CH$_4$, CO$_2$/N$_2$, and CH$_4$/N$_2$ mixtures are discussed and compared with separation properties of Virtual Porous Carbon models. GNCs may be considered as potential adsorbents for gas mixture separation, having separation efficiency similar or even higher than activated carbons with similar diameters of pores.
△ Less
Submitted 7 March, 2016;
originally announced March 2016.
-
Equilibrium Clusters in Concentrated Lysozyme Protein Solutions
Authors:
P. Kowalczyk,
A. Ciach,
P. A. Gauden,
A. P. Terzyk
Abstract:
We have studied the structure of salt-free lysozyme at 293 K and pH 7.8 using molecular simulations and experimental SAXS effective potentials between proteins at three volume fractions, 0.012, 0.033, and 0.12. We found that the structure of lysozyme near physiological conditions strongly depends on the volume fraction of proteins. The studied lysozyme solutions are dominated by monomers only for…
▽ More
We have studied the structure of salt-free lysozyme at 293 K and pH 7.8 using molecular simulations and experimental SAXS effective potentials between proteins at three volume fractions, 0.012, 0.033, and 0.12. We found that the structure of lysozyme near physiological conditions strongly depends on the volume fraction of proteins. The studied lysozyme solutions are dominated by monomers only for <0.012; for the strong dilution 70% of proteins are in a form of monomers. For 0.033 only 20% of proteins do not belong to a cluster. The clusters are mainly elongated. For 0.12 almost no individual particles exits, and branched, irregular clusters of large extent appear. Our simulation study provides new insight into the formation of equilibrium clusters in charged protein solutions near physiological conditions.
△ Less
Submitted 3 June, 2011;
originally announced June 2011.
-
On the B^1Πstate of NaCs
Authors:
A. Grochola,
W. Jastrzebski,
P. Kowalczyk
Abstract:
The B^1Π<- X^1Σ^+ system of NaCs molecule is investigated experimentally by polarization labelling spectroscopy technique. The inverted perturbation approach method is used to construct the potential energy curve of the B^1Πstate, providing accurate eigenenergies for vibrational levels v = 0 - 15.
The B^1Π<- X^1Σ^+ system of NaCs molecule is investigated experimentally by polarization labelling spectroscopy technique. The inverted perturbation approach method is used to construct the potential energy curve of the B^1Πstate, providing accurate eigenenergies for vibrational levels v = 0 - 15.
△ Less
Submitted 25 September, 2009;
originally announced September 2009.
-
Transition from stable orbit to chaotic dynamics in hybrid systems of Filippov type with digital sampling
Authors:
Paul Glendinning,
Piotr Kowalczyk
Abstract:
We demonstrate on a representative example of a planar hybrid system with digital sampling a sudden transition from a stable limit cycle to the onset of chaotic dynamics. We show that the scaling law in the size of the attractor is proportional to the digital sampling time $τ$ for sufficiently small values of $τ.$ Numerical and analytical results are given. The scaling law changes to a nonlinear…
▽ More
We demonstrate on a representative example of a planar hybrid system with digital sampling a sudden transition from a stable limit cycle to the onset of chaotic dynamics. We show that the scaling law in the size of the attractor is proportional to the digital sampling time $τ$ for sufficiently small values of $τ.$ Numerical and analytical results are given. The scaling law changes to a nonlinear law for large values of the sampling time $τ.$ This phenomenon is explained by the change in the boundedness of the attractor.
△ Less
Submitted 20 January, 2009;
originally announced January 2009.
-
Mono-, bi- and tri- graphene layers deposited on conductive Au/Cr/SiO2/Si substrate studied by scanning tunnelling spectroscopy
Authors:
Z. Klusek,
P. Dabrowski,
P. Kowalczyk,
W. Kozlowski,
P. Blake,
M. Szybowicz,
T. Runka,
W. Olejniczak
Abstract:
Graphene devices require electric contacts with metals, particularly with gold. Scanning tunneling spectroscopy studies of electron local density of states performed on mono-, bi- and tri- graphene layer deposited on metallic conductive Au/Cr/SiO2/Si substrate shows that gold substrate causes the Fermi level shift downwards which means that holes are donated by metal substrate to graphene which…
▽ More
Graphene devices require electric contacts with metals, particularly with gold. Scanning tunneling spectroscopy studies of electron local density of states performed on mono-, bi- and tri- graphene layer deposited on metallic conductive Au/Cr/SiO2/Si substrate shows that gold substrate causes the Fermi level shift downwards which means that holes are donated by metal substrate to graphene which becomes p-type doped. These experimental results are in good accordance with recently published density function theory calculations. The estimated positions of the Dirac point show that the higher number of graphene layers the lower Fermi level shift is observed.
△ Less
Submitted 31 December, 2008;
originally announced January 2009.
-
Small-scale instabilities in dynamical systems with sliding
Authors:
Jan Sieber,
Piotr Kowalczyk
Abstract:
We demonstrate with a minimal example that in Filippov systems (dynamical systems governed by discontinuous but piecewise smooth vector fields) stable periodic motion with sliding is not robust with respect to stable singular perturbations. We consider a simple dynamical system that we assume to be a quasi-static approximation of a higher-dimensional system containing a fast stable subsystem. We t…
▽ More
We demonstrate with a minimal example that in Filippov systems (dynamical systems governed by discontinuous but piecewise smooth vector fields) stable periodic motion with sliding is not robust with respect to stable singular perturbations. We consider a simple dynamical system that we assume to be a quasi-static approximation of a higher-dimensional system containing a fast stable subsystem. We tune a system parameter such that a stable periodic orbit of the simple system touches the discontinuity surface: this is the so-called grazing-sliding bifurcation. The periodic orbit remains stable, and its local return map becomes piecewise linear. However, when we take into account the fast dynamics the local return map of the periodic orbit changes qualitatively, giving rise to, for example, period-adding cascades or small-scale chaos.
△ Less
Submitted 12 July, 2010; v1 submitted 12 November, 2008;
originally announced November 2008.
-
Dynamics of symmetric dynamical systems with delayed switching
Authors:
J. Sieber,
P. Kowalczyk,
S. J. Hogan,
M. di Bernardo
Abstract:
We study dynamical systems that switch between two different vector fields depending on a discrete variable and with a delay. When the delay reaches a problem-dependent critical value so-called event collisions occur. This paper classifies and analyzes event collisions, a special type of discontinuity induced bifurcations, for periodic orbits. Our focus is on event collisions of symmetric period…
▽ More
We study dynamical systems that switch between two different vector fields depending on a discrete variable and with a delay. When the delay reaches a problem-dependent critical value so-called event collisions occur. This paper classifies and analyzes event collisions, a special type of discontinuity induced bifurcations, for periodic orbits. Our focus is on event collisions of symmetric periodic orbits in systems with full reflection symmetry, a symmetry that is prevalent in applications. We derive an implicit expression for the Poincare map near the colliding periodic orbit. The Poincare map is piecewise smooth, finite-dimensional, and changes the dimension of its image at the collision. In the second part of the paper we apply this general result to the class of unstable linear single-degree-of-freedom oscillators where we detect and continue numerically collisions of invariant tori. Moreover, we observe that attracting closed invariant polygons emerge at the torus collision.
△ Less
Submitted 2 April, 2008;
originally announced April 2008.
-
A regularized inverted perturbation approach method: potential energy curve of the $4^1Σ^+_u$ state in $Na_2$
Authors:
A. Grochola,
P. Kowalczyk,
W. Jastrzebski,
A. Pashov
Abstract:
We describe a modification of the inverted perturbation approach method allowing to construct physically sensible potential energy curves for electronic states of diatomic molecules even when some parts of the potential are not adequately characterized by the experimental data. The method is based on a simple regularization procedure, imposing an additional constraint on the constructed potentia…
▽ More
We describe a modification of the inverted perturbation approach method allowing to construct physically sensible potential energy curves for electronic states of diatomic molecules even when some parts of the potential are not adequately characterized by the experimental data. The method is based on a simple regularization procedure, imposing an additional constraint on the constructed potential curve. In the present work it is applied to the double minimum 4$^1Σ^{+}_{\mathrm u}$ state of Na$_2$, observed experimentally by polarization labeling spectroscopy technique.
△ Less
Submitted 6 April, 2004;
originally announced April 2004.
