-
Electromagnetic properties of terbium gallium garnet at millikelvin temperatures and single photon energy
Authors:
Nikita Kostylev,
Maxim Goryachev,
Pavel Bushev,
Michael E. Tobar
Abstract:
Electromagnetic properties of single crystal terbium gallium garnet (TGG) are characterised from room down to millikelvin temperatures using the whispering gallery mode method. Microwave spectroscopy is performed at low powers equivalent to a few photons in energy and conducted as functions of the magnetic field and temperature. A phase transition is detected close to the temperature of 3.5 K. Thi…
▽ More
Electromagnetic properties of single crystal terbium gallium garnet (TGG) are characterised from room down to millikelvin temperatures using the whispering gallery mode method. Microwave spectroscopy is performed at low powers equivalent to a few photons in energy and conducted as functions of the magnetic field and temperature. A phase transition is detected close to the temperature of 3.5 K. This is observed for multiple whispering gallery modes causing an abrupt negative frequency shift and a change in transmission due to extra losses in the new phase caused by a change in complex magnetic susceptibility.
△ Less
Submitted 25 July, 2017; v1 submitted 14 February, 2017;
originally announced February 2017.
-
Determination of Low Loss in Isotopically Pure Single Crystal $^{28}$Si at Low Temperatures and Single Microwave Photon Energy
Authors:
Nikita Kostylev,
Maxim Goryachev,
Andrey D. Bulanov,
Vladimir A. Gavva,
Michael E. Tobar
Abstract:
The low dielectric losses of an isotropically pure single crystal $^{28}$Si sample were determined at a temperature of 20 mK and at powers equivalent to that of a single photon. Whispering Gallery Mode (WGM) analysis revealed large Quality Factors of order $2\times10^6$ (dielectric loss $\sim 5\times10^{-7}$) at high powers, degrading to $7\times10^5$ (dielectric loss $\sim 1.4\times10^{-6}$) at s…
▽ More
The low dielectric losses of an isotropically pure single crystal $^{28}$Si sample were determined at a temperature of 20 mK and at powers equivalent to that of a single photon. Whispering Gallery Mode (WGM) analysis revealed large Quality Factors of order $2\times10^6$ (dielectric loss $\sim 5\times10^{-7}$) at high powers, degrading to $7\times10^5$ (dielectric loss $\sim 1.4\times10^{-6}$) at single photon energy. A very low-loss narrow line width paramagnetic spin flip transition was detected with extreme sensitivity in $^{28}$Si, with very small concentration below $10^{11}$~cm$^{-3}$ (less than 10 parts per trillion) and g-factor of $1.995\pm0.008$. Such determination was only possible due to the low dielectric photonic losses combined with the long lifetime of the spin transition (low magnetic loss), which enhances the magnetic AC susceptibility. Such low photonic loss at single photon energy combined with the narrow line width of the spin ensemble, indicate that single crystal $^{28}$Si could be an important crystal for future cavity QED experiments.
△ Less
Submitted 10 September, 2016; v1 submitted 16 June, 2016;
originally announced June 2016.
-
A 3D Printed Superconducting Aluminium Microwave Cavity
Authors:
Daniel L. Creedon,
Maxim Goryachev,
Nikita Kostylev,
Tim Sercombe,
Michael E. Tobar
Abstract:
3D printing of plastics, ceramics, and metals has existed for several decades and has revolutionized many areas of manufacturing and science. Printing of metals in particular has found a number of applications in fields as diverse as customized medical implants, jet engine bearings, and rapid prototy** in the automotive industry. Whilst many techniques can be used for 3D printing metals, they co…
▽ More
3D printing of plastics, ceramics, and metals has existed for several decades and has revolutionized many areas of manufacturing and science. Printing of metals in particular has found a number of applications in fields as diverse as customized medical implants, jet engine bearings, and rapid prototy** in the automotive industry. Whilst many techniques can be used for 3D printing metals, they commonly rely on computer controlled melting or sintering of a metal alloy powder using a laser or electron beam. The mechanical properties of parts produced in such a way have been well studied, but little attention has been paid to their electrical properties. Here we show that a microwave cavity (resonant frequencies 9.9 and 11.2 GHz) 3D printed using an Al-12Si alloy exhibits superconductivity when cooled below the critical temperature of aluminium (1.2 K), with a performance comparable to the common 6061 alloy of aluminium. Superconducting cavities find application in numerous areas of physics, from particle accelerators to cavity quantum electrodynamics experiments. The result is achieved even with a very large concentration of non-superconducting silicon in the alloy of 12.18%, compared to Al-6061, which has between 0.4 to 0.8%. Our results may pave the way for the possibility of 3D printing superconducting cavity configurations that are otherwise impossible to machine.
△ Less
Submitted 31 May, 2016; v1 submitted 13 April, 2016;
originally announced April 2016.
-
Ultra-High Cooperativity Interactions between Magnons and Resonant Photons in a YIG sphere
Authors:
Jeremy Bourhill,
Nikita Kostylev,
Maxim Goryachev,
Daniel Creedon,
Michael Tobar
Abstract:
Resonant photon modes of a 5mm diameter YIG sphere loaded in a cylindrical cavity in the 10-30GHz frequency range are characterised as a function of applied DC magnetic field at millikelvin temperatures. The photon modes are confined mainly to the sphere, and exhibited large mode filling factors in comparison to previous experiments, allowing ultrastrong coupling with the magnon spin wave resonanc…
▽ More
Resonant photon modes of a 5mm diameter YIG sphere loaded in a cylindrical cavity in the 10-30GHz frequency range are characterised as a function of applied DC magnetic field at millikelvin temperatures. The photon modes are confined mainly to the sphere, and exhibited large mode filling factors in comparison to previous experiments, allowing ultrastrong coupling with the magnon spin wave resonances. The largest observed coupling between photons and magnons is $2g/2π=7.11$ GHz for a 15.5 GHz mode, corresponding to a cooperativity of $C=1.51\pm0.47\times10^7$. Complex modifications beyond a simple multi-oscillator model, of the photon mode frequencies were observed between 0 and 0.1 Tesla. Between 0.4 to 1 Tesla, degenerate resonant photon modes were observed to interact with magnon spin wave resonances with different couplings strengths, indicating time reversal symmetry breaking due to the gyrotropic permeability of YIG. Bare dielectric resonator mode frequencies were determined by detuning magnon modes to significantly higher frequencies with strong magnetic fields. By comparing measured mode frequencies at 7 Tesla with Finite Element modelling, a bare dielectric permittivity of $15.96\pm0.02$ of the YIG crystal has been determined at about $20$ mK.
△ Less
Submitted 25 April, 2016; v1 submitted 24 December, 2015;
originally announced December 2015.
-
Superstrong Coupling of a Microwave Cavity to YIG Magnons
Authors:
Nikita Kostylev,
Maxim Goryachev,
Michael E. Tobar
Abstract:
Multiple-post reentrant 3D lumped cavity modes have been realized to design the concept of discrete Whispering Gallery and Fabry-Perot-like Modes for multimode microwave Quantum Electrodynamics experiments. Using a magnon spin-wave resonance of a submillimeter-sized Yttrium-Iron-Garnet sphere at milliKelvin temperatures and a four-post cavity, we demonstrate the ultra-strong coupling regime betwee…
▽ More
Multiple-post reentrant 3D lumped cavity modes have been realized to design the concept of discrete Whispering Gallery and Fabry-Perot-like Modes for multimode microwave Quantum Electrodynamics experiments. Using a magnon spin-wave resonance of a submillimeter-sized Yttrium-Iron-Garnet sphere at milliKelvin temperatures and a four-post cavity, we demonstrate the ultra-strong coupling regime between discrete Whispering Gallery Modes and a magnon resonance with strength of 1.84 GHz. By increasing the number of posts to eight and arranging them in a D$_4$ symmetry pattern, we expand the mode structure to that of a discrete Fabry-Perot cavity and modify the Free Spectral Range (FSR). We reach the superstrong coupling regime, where spin-photon coupling strength is larger than FSR, with coupling strength in the 1.1 to 1.5 GHz range.
△ Less
Submitted 29 January, 2016; v1 submitted 20 August, 2015;
originally announced August 2015.
-
Single Photon Level Study of Microwave Properties of Lithium Niobate at milli-Kelvin Temperatures
Authors:
Maxim Goryachev,
Nikita Kostylev,
Michael E. Tobar
Abstract:
Properties of doped and natural impurities in Lithium Niobate single crystals are studied using the Whispering Gallery Mode method at low temperatures as a function of magnetic field. The study reveals considerable coupling of microwave photon modes to the Fe$^{3+}$ spin ensemble in iron-doped and non-doped crystals. The $S=5/2$ structure of the Fe$^{3+}$ impurities demonstrate Zero Field Splittin…
▽ More
Properties of doped and natural impurities in Lithium Niobate single crystals are studied using the Whispering Gallery Mode method at low temperatures as a function of magnetic field. The study reveals considerable coupling of microwave photon modes to the Fe$^{3+}$ spin ensemble in iron-doped and non-doped crystals. The $S=5/2$ structure of the Fe$^{3+}$ impurities demonstrate Zero Field Splittings of $11.21$ and $20.96$ GHz, significant asymmetry of the Zeeman lines and additional lines with anomalous $\text{g}$-factors of $1.37$ and $3.95$. Also, interactions between different transitions of the Fe$^{3+}$ ion is observed. An additional ion impurity ensemble with a splitting of about $1.7$ GHz is shown to couple to the dominating Fe$^{3+}$ spins and the effect on $Q$-factors of microwave photon modes due to the Fe$^{3+}$ ion ensemble is also demonstrated. Measurements down to less than one photon level are made with a loss tangent of order $10^{-5}$ determined.
△ Less
Submitted 28 April, 2015;
originally announced April 2015.
-
Spectroscopy and laser cooling on the $^{1}S_{0}-\,^{3}P_{1}$ line in Yb via an injection-locked diode laser at 1111.6nm
Authors:
Nikita Kostylev,
Clayton R. Locke,
Michael E. Tobar,
John J. McFerran
Abstract:
We generate 555.8nm light with sub-MHz linewidth through the use of laser injection-locking of a semiconductor diode at 1111.6nm, followed by frequency doubling in a resonant cavity. The integrity of the injection lock is investigated by studying an offset-beat signal between slave and master lasers, by performing spectroscopy on the $(6s)^{2}$ $^{1}S_{0}-\,(6s6p)$ $^{3}P_{1}$ transition in magnet…
▽ More
We generate 555.8nm light with sub-MHz linewidth through the use of laser injection-locking of a semiconductor diode at 1111.6nm, followed by frequency doubling in a resonant cavity. The integrity of the injection lock is investigated by studying an offset-beat signal between slave and master lasers, by performing spectroscopy on the $(6s)^{2}$ $^{1}S_{0}-\,(6s6p)$ $^{3}P_{1}$ transition in magneto-optically trapped ytterbium, and by demonstrating additional laser cooling of $^{171}$Yb with the 555.8nm light. For the $^{1}S_{0}-$ $^{3}P_{1}$ spectroscopy, we confirm the linear dependence between ground state linewidth and the intensity of an off-resonant laser, namely, that used to cool Yb atoms in a $^{1}S_{0}-$ $^{1}P_{1}$ magneto-optical trap. Our results demonstrate the suitability of injection locked 1100-1130nm laser diodes as a source for sub-MHz linewidth radiation in the yellow-green spectrum.
△ Less
Submitted 28 November, 2014; v1 submitted 17 October, 2014;
originally announced October 2014.
-
Sub-Doppler cooling of ytterbium with the $^{1}S_{0}$-$^{1}P_{1}$ transition including $^{171}$Yb (I=1/2)
Authors:
Nikita Kostylev,
Eugene Ivanov,
Michael E. Tobar,
John J. McFerran
Abstract:
We report on the sub-Doppler laser cooling of neutral $^{171}$Yb and $^{173}$Yb in a magneto-optical trap using the $^{1}S_{0}$-$^{1}P_{1}$ transition at 398.9nm. We use two independent means to estimate the temperature of the atomic cloud for several of the Yb isotopes. The two methods of MOT-cloud-imaging and release-and-recapture show consistency with one another. Temperatures below 400$μ$K and…
▽ More
We report on the sub-Doppler laser cooling of neutral $^{171}$Yb and $^{173}$Yb in a magneto-optical trap using the $^{1}S_{0}$-$^{1}P_{1}$ transition at 398.9nm. We use two independent means to estimate the temperature of the atomic cloud for several of the Yb isotopes. The two methods of MOT-cloud-imaging and release-and-recapture show consistency with one another. Temperatures below 400$μ$K and 200$μ$K are recorded for $^{171}$Yb and $^{173}$Yb, respectively, while ~1mK is measured for both $^{172}$Yb and $^{174}$Yb. By comparison, the associated 1D Doppler cooling temperature limit is 694$μ$K. The sub-Doppler cooling of the I=1/2 $^{171}$Yb isotope in a $σ^{+}-σ^{-}$ light-field trap adds further evidence that the Sisyphus cooling mechanism is occurring in such 3D magneto-optical traps.
△ Less
Submitted 6 May, 2014;
originally announced May 2014.
-
Magnetization pinning in conducting films demonstrated using broadband ferromagnetic resonance
Authors:
M. Kostylev,
A. A. Stashkevich,
A. O. Adeyeye,
C. Shakespeare,
N. Kostylev,
N. Ross,
K. Kennewell,
R. Magaraggia,
Y. Roussigné,
R. L. Stamps
Abstract:
The broadband microstrip ferromagnetic resonance technique has been applied for detection and characterization of a magnetic inhomogeneity in a film sample. In the case of a 100nm thick Permalloy film an additional magnetically depleted top sub-layer, practically unidentifiable by the conventional ferromagnetic resonance setup, has been detected and characterized. These results have been confirmed…
▽ More
The broadband microstrip ferromagnetic resonance technique has been applied for detection and characterization of a magnetic inhomogeneity in a film sample. In the case of a 100nm thick Permalloy film an additional magnetically depleted top sub-layer, practically unidentifiable by the conventional ferromagnetic resonance setup, has been detected and characterized. These results have been confirmed by Brillouin light scattering spectroscopy revealing the fact that the optical properties of the additional sub-layer do not differ much from those of the bulk of the film. Subsequent characterization of a large number of other presumably single-layer films with thicknesses in the range 30-100nm using the same ferromagnetic resonance technique also revealed the same effect.
△ Less
Submitted 2 June, 2010;
originally announced June 2010.
