-
An Embedded Decision Support System for Runway Safety and Excursion Avoidance
Authors:
Georgios Alogdianakis,
Ioannis Katsidimas,
Athanasios Kotzakolios,
Anastasios Plioutsias,
Vassilis Kostopoulos
Abstract:
Runway Safety Assistant Foreseeing Excursions (RUN.S.A.F.E.) is a complete embedded system solution that predicts a potential runway overrun during the takeoff and landing of a civil aviation aircraft. The system executes both static and dynamic calculations, the former being completely dependent, while the latter completely independent to the user's inputs. The solution is adapted to a Boeing 737…
▽ More
Runway Safety Assistant Foreseeing Excursions (RUN.S.A.F.E.) is a complete embedded system solution that predicts a potential runway overrun during the takeoff and landing of a civil aviation aircraft. The system executes both static and dynamic calculations, the former being completely dependent, while the latter completely independent to the user's inputs. The solution is adapted to a Boeing 737-800 aircraft, with CFM56-7B engines. However, the calculations also apply for similar aicrafts, equipped with a tricycle landing gear and turbofan engines. The system is aligned with current regulations and certification specifications, where applicable.
△ Less
Submitted 14 June, 2024;
originally announced July 2024.
-
Mode I fracture toughness of asymmetric metal-composite adhesive joints
Authors:
Theodoros Loutas,
Panayiotis Tsokanas,
Vassilis Kostopoulos,
Peter Nijhuis,
Wouter M. van den Brink
Abstract:
In this work, the mode I fracture toughness of dissimilar metal-composite adhesive joints is experimentally investigated using the double cantilever beam (DCB) test. The particular joint under study is resulted by the adhesive joining of a thin titanium sheet with a thin carbon fiber reinforced plastic (CFRP) laminate and is envisioned to be implemented in the hybrid laminar flow control system of…
▽ More
In this work, the mode I fracture toughness of dissimilar metal-composite adhesive joints is experimentally investigated using the double cantilever beam (DCB) test. The particular joint under study is resulted by the adhesive joining of a thin titanium sheet with a thin carbon fiber reinforced plastic (CFRP) laminate and is envisioned to be implemented in the hybrid laminar flow control system of future aircraft. Four different industrial technologies for the joining of the titanium and CFRP adherents are evaluated/compared; co-bonding with and without adhesive and secondary bonding using either thermoset or thermoplastic CFRP. The vacuum-assisted resin transfer molding (VARTM) technique is employed for the manufacturing of the panels. After manufacturing, the panels are cut into test specimens that, because they are too thin (approximately 2.4 mm thick), needed to be stiffened from both titanium and composite sides with two aluminum backing beams to ensure the non-yielding of the titanium during the subsequent DCB tests. Towards the determination of the fracture toughness of the joint from the experimental data, an analytical model recently developed by the authors, that considers the bending-extension coupling of both sub-laminates constituting the test specimen as well as the manufacturing-induced residual thermal stresses, is applied. For the four manufacturing options (MO) investigated, the load-displacement behaviors, failure patterns, and fracture toughness performances are presented and compared.
△ Less
Submitted 7 May, 2020; v1 submitted 24 February, 2020;
originally announced February 2020.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
