-
Dome Craters on Ganymede and Callisto May Form by Topographic Relaxation of Pit Craters Aided by Remnant Impact Heat
Authors:
Martina L. Caussi,
Andrew J. Dombard,
Donald G. Korycansky,
Oliver L. White,
Jeffrey M. Moore,
Paul M. Schenk
Abstract:
The icy Galilean satellites display impact crater morphologies that are rare in the Solar System. They deviate from the archetypal sequence of crater morphologies as a function of size found on rocky bodies and other icy satellites: they exhibit central pits in place of peaks, followed by central dome craters, anomalous dome craters, penepalimpsests, palimpsests, and multi-ring structures. Underst…
▽ More
The icy Galilean satellites display impact crater morphologies that are rare in the Solar System. They deviate from the archetypal sequence of crater morphologies as a function of size found on rocky bodies and other icy satellites: they exhibit central pits in place of peaks, followed by central dome craters, anomalous dome craters, penepalimpsests, palimpsests, and multi-ring structures. Understanding the origin of these features will provide insight into the geophysical factors that operate within the icy Galilean satellites. Pit craters above a size threshold feature domes. This trend, and the similarity in morphology between the two classes, suggest a genetic link between pit and dome craters. We propose that dome craters evolve from pit craters through topographic relaxation, facilitated by remnant heat from the impact. Our finite element simulations show that, for the specific crater sizes where we see domes on Ganymede and Callisto, domes form from pit craters within 10 Myr. Topographic relaxation eliminates the stresses induced by crater topography and restores a flat surface: ice flows downwards from the rim and upwards from the crater depression driven by gravity. When the starting topography is a pit crater, the heat left over from the impact is concentrated below the pit. Since warm ice flows more rapidly, the upward flow is enhanced beneath the pit, leading to the emergence of a dome. Given the timescales and the dependence on heat flux, this model could be used to constrain the thermal history and evolution of these moons.
△ Less
Submitted 27 June, 2024; v1 submitted 22 March, 2024;
originally announced March 2024.
-
Large Impact Features on Ganymede and Callisto as Revealed by Geological Map** and Morphometry
Authors:
Oliver L. White,
Jeffrey M. Moore,
Paul M. Schenk,
Donald. G. Korycansky,
Andrew J. Dombard,
Martina L. Caussi,
Kelsi N. Singer
Abstract:
We have performed topographic and geological map** of 19 large impact features on Ganymede and Callisto in order to gather morphometric and crater age data that allow us to quantify how the diverse morphologies of these features transition with size and age. The impact features are divided into two main morphological groups, craters and penepalimpsests/palimpsests. The morphologies of pit and do…
▽ More
We have performed topographic and geological map** of 19 large impact features on Ganymede and Callisto in order to gather morphometric and crater age data that allow us to quantify how the diverse morphologies of these features transition with size and age. The impact features are divided into two main morphological groups, craters and penepalimpsests/palimpsests. The morphologies of pit and dome craters are independent of age or geologic context, indicating that the impacts that formed them were small enough to only ever penetrate into a cold, rigid ice layer, with evolution of a pocket of impact melt contributing to the development of their central pits and surrounding raised annuli, while the domes formed mainly via viscous relaxation of the pit topography. The subdued rims of anomalous dome craters indicate the increasing effect of a warm subsurface ice layer on impact feature morphology with increasing size. The low topographic relief of penepalimpsests and palimpsests indicates that these impacts penetrated the ice shell to liberate large volumes of underlying, pre-existing liquid. Penepalimpsests show a higher frequency of concentric ridges within their interiors, indicating a more robust subsurface state that could support the rotation and uplift of solid material during impact. The size and age overlap of anomalous dome craters, penepalimpsests, and palimpsests, with a few impact features appearing to be transitional between anomalous dome craters and penepalimpsests, indicates that impactor size, time of impact, and variation in temperature gradient across the satellite are all factors in determining which of these morphologies emerges.
△ Less
Submitted 20 March, 2024;
originally announced March 2024.
-
Planetary Giant Impacts: Convergence of High-Resolution Simulations using Efficient Spherical Initial Conditions and SWIFT
Authors:
J. A. Kegerreis,
V. R. Eke,
P. G. Gonnet,
D. G. Korycansky,
R. J. Massey,
M. Schaller,
L. F. A. Teodoro
Abstract:
We perform simulations of giant impacts onto the young Uranus using smoothed particle hydrodynamics (SPH) with over 100 million particles. This 100--1000$\times$ improvement in particle number reveals that simulations with below 10^7 particles fail to converge on even bulk properties like the post-impact rotation period, or on the detailed erosion of the atmosphere. Higher resolutions appear to de…
▽ More
We perform simulations of giant impacts onto the young Uranus using smoothed particle hydrodynamics (SPH) with over 100 million particles. This 100--1000$\times$ improvement in particle number reveals that simulations with below 10^7 particles fail to converge on even bulk properties like the post-impact rotation period, or on the detailed erosion of the atmosphere. Higher resolutions appear to determine these large-scale results reliably, but even 10^8 particles may not be sufficient to study the detailed composition of the debris -- finding that almost an order of magnitude more rock is ejected beyond the Roche radius than with 10^5 particles. We present two software developments that enable this increase in the feasible number of particles. First, we present an algorithm to place any number of particles in a spherical shell such that they all have an SPH density within 1% of the desired value. Particles in model planets built from these nested shells have a root-mean-squared velocity below 1% of the escape speed, which avoids the need for long precursor simulations to produce relaxed initial conditions. Second, we develop the hydrodynamics code SWIFT for planetary simulations. SWIFT uses task-based parallelism and other modern algorithmic approaches to take full advantage of contemporary supercomputer architectures. Both the particle placement code and SWIFT are publicly released.
△ Less
Submitted 7 April, 2020; v1 submitted 28 January, 2019;
originally announced January 2019.
-
Consequences of Giant Impacts on Early Uranus for Rotation, Internal Structure, Debris, and Atmospheric Erosion
Authors:
J. A. Kegerreis,
L. F. A. Teodoro,
V. R. Eke,
R. J. Massey,
D. C. Catling,
C. L. Fryer,
D. G. Korycansky,
M. S. Warren,
K. J. Zahnle
Abstract:
We perform a suite of smoothed particle hydrodynamics simulations to investigate in detail the results of a giant impact on the young Uranus. We study the internal structure, rotation rate, and atmospheric retention of the post-impact planet, as well as the composition of material ejected into orbit. Most of the material from the impactor's rocky core falls in to the core of the target. However, f…
▽ More
We perform a suite of smoothed particle hydrodynamics simulations to investigate in detail the results of a giant impact on the young Uranus. We study the internal structure, rotation rate, and atmospheric retention of the post-impact planet, as well as the composition of material ejected into orbit. Most of the material from the impactor's rocky core falls in to the core of the target. However, for higher angular momentum impacts, significant amounts become embedded anisotropically as lumps in the ice layer. Furthermore, most of the impactor's ice and energy is deposited in a hot, high-entropy shell at a radius of ~3 Earth radii. This could explain Uranus' observed lack of heat flow from the interior and be relevant for understanding its asymmetric magnetic field. We verify the results from the single previous study of lower resolution simulations that an impactor with a mass of at least 2 Earth masses can produce sufficiently rapid rotation in the post-impact Uranus for a range of angular momenta. At least 90% of the atmosphere remains bound to the final planet after the collision, but over half can be ejected beyond the Roche radius by a 2 or 3 Earth mass impactor. This atmospheric erosion peaks for intermediate impactor angular momenta (~3*10^36 kg m^2 s^-1). Rock is more efficiently placed into orbit and made available for satellite formation by 2 Earth mass impactors than 3 Earth mass ones, because it requires tidal disruption that is suppressed by the more massive impactors.
△ Less
Submitted 3 July, 2018; v1 submitted 19 March, 2018;
originally announced March 2018.
-
Numerical Modeling of the 2009 Impact Event on Jupiter
Authors:
Jarrad W. T. Pond,
Csaba Palotai,
Travis Gabriel,
Donald G. Korycansky,
Joseph Harrington,
Noemi Rebeli
Abstract:
We have investigated the 2009 July impact event on Jupiter using the ZEUS-MP 2 three-dimensional hydrodynamics code. We studied the impact itself and the following plume development. Eight impactors were considered: 0.5 km and 1 km porous (ρ= 1.760 g cm^{-3}) and non-porous (ρ= 2.700 g cm^{-3}) basalt impactors, and 0.5 km and 1 km porous (ρ= 0.600 g cm^{-3}) and non-porous ρ= 0.917 g cm^{-3}) ice…
▽ More
We have investigated the 2009 July impact event on Jupiter using the ZEUS-MP 2 three-dimensional hydrodynamics code. We studied the impact itself and the following plume development. Eight impactors were considered: 0.5 km and 1 km porous (ρ= 1.760 g cm^{-3}) and non-porous (ρ= 2.700 g cm^{-3}) basalt impactors, and 0.5 km and 1 km porous (ρ= 0.600 g cm^{-3}) and non-porous ρ= 0.917 g cm^{-3}) ice impactors. The simulations consisted of these bolides colliding with Jupiter at an incident angle of θ= 69 degrees from the vertical and with an impact velocity of v = 61.4 km s^{-1}. Our simulations show the development of relatively larger, faster plumes created after impacts involving 1 km diameter bodies. Comparing simulations of the 2009 event with simulations of the Shoemaker-Levy 9 events reveals a difference in plume development, with the higher incident angle of the 2009 impact leading to a shallower terminal depth and a smaller and slower plume. We also studied the amount of dynamical chaos present in the simulations conducted at the 2009 incident angle. Compared to the chaos of the SL9 simulations, where θis approximately 45 degrees, we find no significant difference in chaos at the higher 2009 incident angle.
△ Less
Submitted 23 March, 2012;
originally announced March 2012.
-
Plume Development of the Shoemaker-Levy 9 Comet Impact
Authors:
Csaba Palotai,
Donald G. Korycansky,
Joseph Harrington,
Noémi Rebeli,
Travis Gabriel
Abstract:
We have studied plume formation after a Jovian comet impact using the ZEUS-MP 2 hydrodynamics code. The three-dimensional models followed objects with 500, 750, and 1000 meter diameters. Our simulations show the development of a fast, upward-moving component of the plume in the wake of the impacting comet that "pinches off" from the bulk of the cometary material ~50 km below the 1 bar pressure lev…
▽ More
We have studied plume formation after a Jovian comet impact using the ZEUS-MP 2 hydrodynamics code. The three-dimensional models followed objects with 500, 750, and 1000 meter diameters. Our simulations show the development of a fast, upward-moving component of the plume in the wake of the impacting comet that "pinches off" from the bulk of the cometary material ~50 km below the 1 bar pressure level, ~100 km above the depth of greatest mass and energy deposition. The fast-moving component contains about twice the mass of the initial comet, but consists almost entirely (>99.9%) of Jovian atmosphere rather than cometary material. The ejecta rise mainly along the impact trajectory, but an additional vertical velocity component due to buoyancy establishes itself within seconds of impact, leading to an asymmetry in the ejecta with respect to the entry trajectory. The mass of the upward-moving component follows a velocity distribution M(>v) approximately proportional to v^-1.4 (v^-1.6 for the 750 m and 500 m cases) in the velocity range 0.1 < v < 10 km/s.
△ Less
Submitted 15 February, 2011;
originally announced February 2011.
-
Shoemaker-Levy 9 Impact Modeling: I. High-Resolution 3D Bolides
Authors:
D. G. Korycansky,
Joseph Harrington,
Drake Deming,
Mathew E. Kulick
Abstract:
We have run high-resolution, three-dimensional, hydrodynamic simulations of the impact of comet Shoemaker-Levy 9 into the atmosphere of Jupiter. We find that the energy deposition profile is largely similar to the previous two-dimensional calculations of Mac Low and Zahnle (1994), though perhaps somewhat broader in the range of height over which the energy is deposited. As with similar calculati…
▽ More
We have run high-resolution, three-dimensional, hydrodynamic simulations of the impact of comet Shoemaker-Levy 9 into the atmosphere of Jupiter. We find that the energy deposition profile is largely similar to the previous two-dimensional calculations of Mac Low and Zahnle (1994), though perhaps somewhat broader in the range of height over which the energy is deposited. As with similar calculations for impacts into the Venusian atmosphere, there is considerable sensitivity in the results to small changes in the initial conditions, indicating dynamical chaos. We calculated the median depth of energy deposition (the height z at which 50% of the bolide's energy has been released) per run. The mean value among runs is approx 70 km below the 1-bar level, for a 1-km diameter impactor of porous ice of density rho=0.6 g cm^{-3}. The standard deviation among these runs is 14 km. We find little evidence of a trend in these results with the resolution of the calculations (up to 57 cells across the impactor radius, or 8.8-m resolution), suggesting that resolutions as low as 16 grid cells across the radius of the bolide may yield good results for this particular quantity.
△ Less
Submitted 4 April, 2006;
originally announced April 2006.
-
Astronomical engineering: a strategy for modifying planetary orbits
Authors:
D. G. Korycansky,
Gregory Laughlin,
Fred C. Adams
Abstract:
The Sun's gradual brightening will seriously compromise the Earth's biosphere within ~ 1E9 years. If Earth's orbit migrates outward, however, the biosphere could remain intact over the entire main-sequence lifetime of the Sun. In this paper, we explore the feasibility of engineering such a migration over a long time period. The basic mechanism uses gravitational assists to (in effect) transfer o…
▽ More
The Sun's gradual brightening will seriously compromise the Earth's biosphere within ~ 1E9 years. If Earth's orbit migrates outward, however, the biosphere could remain intact over the entire main-sequence lifetime of the Sun. In this paper, we explore the feasibility of engineering such a migration over a long time period. The basic mechanism uses gravitational assists to (in effect) transfer orbital energy from Jupiter to the Earth, and thereby enlarges the orbital radius of Earth. This transfer is accomplished by a suitable intermediate body, either a Kuiper Belt object or a main belt asteroid. The object first encounters Earth during an inward pass on its initial highly elliptical orbit of large (~ 300 AU) semimajor axis. The encounter transfers energy from the object to the Earth in standard gravity-assist fashion by passing close to the leading limb of the planet. The resulting outbound trajectory of the object must cross the orbit of Jupiter; with proper timing, the outbound object encounters Jupiter and picks up the energy it lost to Earth. With small corrections to the trajectory, or additional planetary encounters (e.g., with Saturn), the object can repeat this process over many encounters. To maintain its present flux of solar energy, the Earth must experience roughly one encounter every 6000 years (for an object mass of 1E22 g). We develop the details of this scheme and discuss its ramifications.
△ Less
Submitted 7 February, 2001;
originally announced February 2001.
