-
The first superconducting final focus quadrupole prototype of the FCC-ee study
Authors:
A. Thabuis,
M. Koratzinos,
G. Kirby,
M. Liebsch,
C. Petrone
Abstract:
A single aperture Canted-Cosine-Theta (CCT) quadrupole magnet, made of NbTi superconductors, has been developed for the final focus region of the FCC-ee study. The conductor layout is optimised to mitigate edge effects on one of the two sides of the magnet that typically lead to undesired higher-order multipoles. Experimental results of a prototype, including paraffin wax impregnation and cryogeni…
▽ More
A single aperture Canted-Cosine-Theta (CCT) quadrupole magnet, made of NbTi superconductors, has been developed for the final focus region of the FCC-ee study. The conductor layout is optimised to mitigate edge effects on one of the two sides of the magnet that typically lead to undesired higher-order multipoles. Experimental results of a prototype, including paraffin wax impregnation and cryogenic temperature measurements, are presented. The magnet exhibits no training behaviour, surpassing the nominal current during the initial ramp. Field quality is excellent, with higher-order multipoles below $1\times 10^{-4}$ units, consistent with simulations and room temperature tests. These findings confirm the potential of superconducting CCT magnets to offer compact solutions for applications demanding stringent field quality.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Future Circular Lepton Collider FCC-ee: Overview and Status
Authors:
I. Agapov,
M. Benedikt,
A. Blondel,
M. Boscolo,
O. Brunner,
M. Chamizo Llatas,
T. Charles,
D. Denisov,
W. Fischer,
E. Gianfelice-Wendt,
J. Gutleber,
P. Janot,
M. Koratzinos,
R. Losito,
S. Nagaitsev,
K. Oide,
T. Raubenheimer,
R. Rimmer,
J. Seeman,
D. Shatilov,
V. Shiltsev,
M. Sullivan,
U. Wienands,
F. Zimmermann
Abstract:
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and,…
▽ More
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and, in a second stage, an energy frontier hadron collider, with a centre-of-mass energy of at least 100 TeV. In this paper, we address a few key elements of the FCC-ee accelerator design, its performance reach, and underlying technologies, as requested by the Snowmass process. The Conceptual Design Report for the FCC, published in 2019, serves as our primary reference. We also summarize a few recent changes and improvements.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Magnetic Measurements at Warm of the First FCC-ee Final Focus Quadrupole Prototype
Authors:
M. Koratzinos,
G. Kirby,
C. Petrone,
M. Liebsch
Abstract:
The first FCC-ee final focus quadrupole prototype has been designed, manufactured, assembled and tested at warm. The prototype is a single aperture quadrupole magnet of the CCT type. One edge of the magnet was designed with local multipole cancellation, whereas the other was left with the conventional design. An optimized rotating induction-coil sensor was used. A technique was developed to take i…
▽ More
The first FCC-ee final focus quadrupole prototype has been designed, manufactured, assembled and tested at warm. The prototype is a single aperture quadrupole magnet of the CCT type. One edge of the magnet was designed with local multipole cancellation, whereas the other was left with the conventional design. An optimized rotating induction-coil sensor was used. A technique was developed to take into account field distortions due to the environment of the test and distinguish them from magnet effects, demonstrating an excellent field quality for the prototype.
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
Challenges for the interaction region design of the Future Circular Collider FCC-ee
Authors:
Manuela Boscolo,
Nicola Bacchetta,
Michael Benedikt,
Laurent Brunetti,
Helmut Burkhardt,
Andrea Ciarma,
Mogens Dam,
Francesco Fransesini,
Mark Jones,
Roberto Kersevan,
Mike Koratzinos,
Marian Lueckhof,
Mauro Migliorati,
Eva Montbarbon,
Alexander Novokhatski,
Katsunobu Oide,
Luigi Pellegrino,
Freddy Poirier,
Maurizio Serluca,
Michael K. Sullivan,
Leonard Watrelot,
Frank Zimmermann
Abstract:
The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discu…
▽ More
The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discuss the possible impact of the radiation generated in the interaction region including beamstrahlung.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
The Magnetic Compensation Scheme of the FCC-ee Detectors
Authors:
M. Koratzinos,
K. Oide
Abstract:
A crucial part of the design of an FCC-ee detector is the minimisation of the disruption of the beam due to the presence of a large and powerful detector magnet. Indeed, the emittance blow-up of the few meters around the interaction point (IP) at lower energies is comparable to the emittance introduced by the rest of the 100 km ring. Vertical emittance is the single most important factor in achiev…
▽ More
A crucial part of the design of an FCC-ee detector is the minimisation of the disruption of the beam due to the presence of a large and powerful detector magnet. Indeed, the emittance blow-up of the few meters around the interaction point (IP) at lower energies is comparable to the emittance introduced by the rest of the 100 km ring. Vertical emittance is the single most important factor in achieving high performance (luminosity, in this case) in a modern e^+ e^- storage ring such as the FCC-ee. The design adopted is the simplest possible arrangement that can nevertheless deliver high performance: two additional coils per IP side. The performance achieved is such that vertical emittance blow-up will not be a limiting performance factor even in the case of a ring with four experiments, and even in the most demanding energy regime, that of the Z running (about 45 GeV beam energy).
△ Less
Submitted 26 May, 2021; v1 submitted 14 January, 2021;
originally announced January 2021.
-
Polarization and Centre-of-mass Energy Calibration at FCC-ee
Authors:
Alain Blondel,
Patrick Janot,
Jörg Wenninger,
Ralf Aßmann,
Sandra Aumon,
Paolo Azzurri,
Desmond P. Barber,
Michael Benedikt,
Anton V. Bogomyagkov,
Eliana Gianfelice-Wendt,
Dima El Kerchen,
Ivan A. Koop,
Mike Koratzinos,
Evgeni Levitchev,
Thibaut Lefevre,
Attilio Milanese,
Nickolai Muchnoi,
Sergey A. Nikitin,
Katsunobu Oide,
Emmanuel Perez,
Robert Rossmanith,
David C. Sagan,
Roberto Tenchini,
Tobias Tydecks,
Dmitry Shatilov
, et al. (3 additional authors not shown)
Abstract:
The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm…
▽ More
The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm) measurements of the W and Z masses and widths, as well as forward-backward asymmetries. To this effect the centre-of-mass energy distribution should be determined with the high precision. This document describes the capacity offered by FCC-ee, starting with transverse polarization of the beams around the Z pole and the W pair threshold. A running scheme based on regular measurements of the beam energy by resonant depolarization of pilot bunches, during physics data taking, is proposed. The design for polarization wigglers, polarimeter and depolarizer is outlined. The $e^\pm$ beam energies will be monitored with a relative precision of $10^{-6}$. The centre-of-mass energy is derived subject to further corrections, related to the beam acceleration, synchrotron radiation and beamstrahlung; these effects are identified and evaluated. Dimuon events $e^+e^- \to μ^+ μ^-$, recorded in the detectors, provide with great precision the beam crossing angle, the centre-of-mass energy spread, and the $e^+$ and $e^-$ energy difference. Monitoring methods to minimize absolute error and relative uncertainties are discussed. The impact on the physics measurements is given. A programme of further simulations, design, monitoring and R&D is outlined.
△ Less
Submitted 26 September, 2019;
originally announced September 2019.
-
FCC-ee: Your Questions Answered
Authors:
Alain Blondel,
Patrick Janot,
Niloufar Alipour Tehrani,
Patrizia Azzi,
Paolo Azzurri,
Nicola Bacchetta,
Michael Benedikt,
Freya Blekman,
Manuela Boscolo,
Mogens Dam,
Stefania De Curtis,
David d'Enterria,
John Ellis,
Gerardo Ganis,
Janusz Gluza,
Clément Helsens,
Staszek Jadach,
Mike Koratzinos,
Markus Klute,
Christos Leonidopoulos,
Elizabeth Locci,
Michelangelo Mangano,
Stéphane Monteil,
Katsunobu Oide,
Vitaly Okorokov
, et al. (7 additional authors not shown)
Abstract:
This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 20…
▽ More
This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 2020 of the European Strategy Group recommendations. This document will be regularly updated as more questions appear or new information becomes available.
△ Less
Submitted 6 June, 2019;
originally announced June 2019.
-
Machine detector interface for the $e^+e^-$ future circular collider
Authors:
Manuela Boscolo,
Oscar Blanco-Garcia,
Nicola Bacchetta,
Eleonora Belli,
Michael Benedikt,
Helmut Burkhardt,
Miguel Gil Costa,
Konrad Elsener,
Emilia Leogrande,
Patrick Janot,
Herman Ten Kate,
Dima El Khechen,
Anna Kolano,
Roberto Kersevan,
Marian Lueckof,
Katsunobu Oide,
Emmanuel Perez,
Nilou Teherani,
O. Viazlo,
Yorgos Voutsinas,
Frank Zimmermann,
Mogens Dam,
Alain Blondel,
M. Koratzinos,
Alexander Novokhatski
, et al. (5 additional authors not shown)
Abstract:
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision s…
▽ More
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision scheme has been chosen for the design and it will be compatible with all beam energies. In this paper we will describe the machine detector interface layout including the solenoid compensation scheme. We will describe how this layout fulfills all the requirements set by the parameters table and by the physical constraints. We will summarize the studies of the impact of the synchrotron radiation, the analysis of trapped modes and of the backgrounds induced by single beam and luminosity effects giving an estimate of the losses in the interaction region and in the detector.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
A Method for Greatly Reduced Edge Effects and Crosstalk in CCT Magnets
Authors:
M. Koratzinos,
G. Kirby,
J. Van Nugteren,
E. R. Bielert
Abstract:
Iron-free CCT magnet design offers many advantages, one being the excellent field quality and the absence of multipole components. However, edge effects are present, although they tend to integrate out over the length of the magnet. Many modern accelerator applications, however, require that these magnets are placed in an area of rapidly varying optics parameters, so magnets with greatly reduced e…
▽ More
Iron-free CCT magnet design offers many advantages, one being the excellent field quality and the absence of multipole components. However, edge effects are present, although they tend to integrate out over the length of the magnet. Many modern accelerator applications, however, require that these magnets are placed in an area of rapidly varying optics parameters, so magnets with greatly reduced edge effects have an advantage. We have designed such a magnet (a quadrupole) by adding multipole components of the opposite sign to the edge distortions of the magnet. A possible application could be the final focus magnets of the FCC-ee, where beam sizes at the entry and exit point of the magnets vary by large factors. We have then used this technique to effectively eliminate cross talk between adjacent final focus quadrupoles for the incoming and outgoing beams.
△ Less
Submitted 25 September, 2017;
originally announced September 2017.
-
Design of beam optics for the Future Circular Collider e+e- -collider rings
Authors:
K. Oide,
M. Aiba,
S. Aumon,
M. Benedikt,
A. Blondel,
A. Bogomyagkov,
M. Boscolo,
H. Burkhardt,
Y. Cai,
A. Doblhammer,
B. Haerer,
B. Holzer,
J. M. Jowett,
I. Koop,
M. Koratzinos,
E. Levichev,
L. Medina,
K. Ohmi,
Y. Papaphilippou,
P. Piminov,
D. Shatilov,
S. Sinyatkin,
M. Sullivan,
J. Wenninger,
U. Wienands
, et al. (2 additional authors not shown)
Abstract:
A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromatici…
▽ More
A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromaticity correction system without additional sextupoles, by reducing the strength of one of the two sextupoles for vertical chromatic correction at each side of the IP. So-called "tapering" of the magnets is applied, which scales all fields of the magnets according to the local beam energy to compensate for the effect of synchrotron radiation (SR) loss along the ring. An asymmetric layout near the interaction region reduces the critical energy of SR photons on the incoming side of the IP to values below 100 keV, while matching the geometry to the beam line of the FCC proton collider (FCC-hh) [2] as closely as possible. Sufficient transverse/longitudinal dynamic aperture (DA) has been obtained, including major dynamical effects, to assure an adequate beam lifetime in the presence of beamstrahlung and top-up injection. In particular, a momentum acceptance larger than +/-2% has been obtained, which is better than the momentum acceptance of typical collider rings by about a factor of 2. The effects of the detector solenoids including their compensation elements are taken into account as well as synchrotron radiation in all magnets. The optics presented in this paper is a step toward a full conceptual design for the collider. A number of issues have been identified for further study.
△ Less
Submitted 23 October, 2016;
originally announced October 2016.
-
The FCC-ee Interaction Region Magnet Design
Authors:
M. Koratzinos,
A. Blondel,
A. Bogomyagkov,
S. Sinyatkin,
M. Benedikt,
B. Holzer,
J. van Nugteren,
F. Zimmermann,
K. Oide
Abstract:
The design of the region close to the interaction point of the FCC-ee experiments is especially challenging. The beams collide at an angle (+-15 mrad) in the high-field region of the detector solenoid. Moreover, the very low vertical beta_y* of the machine necessitates that the final focusing quadrupoles have a distance from the IP (L*) of around 2 m and therefore are inside the main detector sole…
▽ More
The design of the region close to the interaction point of the FCC-ee experiments is especially challenging. The beams collide at an angle (+-15 mrad) in the high-field region of the detector solenoid. Moreover, the very low vertical beta_y* of the machine necessitates that the final focusing quadrupoles have a distance from the IP (L*) of around 2 m and therefore are inside the main detector solenoid. The beams should be screened from the effect of the detector magnetic field, and the emittance blow-up due to vertical dispersion in the interaction region should be minimized, while leaving enough space for detector components. Crosstalk between the two final focus quadrupoles, only about 6 cm apart at the tip, should also be minimized.
△ Less
Submitted 19 July, 2016;
originally announced July 2016.
-
The FCC-ee design study: luminosity and beam polarization
Authors:
M. Koratzinos
Abstract:
The FCC-ee accelerator is considered within the FCC design study as a possible first step towards the ultimate goal of a 100 TeV hadron collider. It is a high luminosity e+e- storage ring collider, designed to cover energies of around 90, 160, 240 and 350GeV ECM (for the Z peak, the WW threshold, the ZH and ttbar cross-section maxima respectively) leading to different operating modes. We report on…
▽ More
The FCC-ee accelerator is considered within the FCC design study as a possible first step towards the ultimate goal of a 100 TeV hadron collider. It is a high luminosity e+e- storage ring collider, designed to cover energies of around 90, 160, 240 and 350GeV ECM (for the Z peak, the WW threshold, the ZH and ttbar cross-section maxima respectively) leading to different operating modes. We report on the current status of the design study, on the most promising concepts and relevant challenges. The expected luminosity performance at all energies, and first studies on transverse polarization for beam energy calibrations will be presented.
△ Less
Submitted 3 November, 2015;
originally announced November 2015.
-
FCC-ee: Energy calibration
Authors:
M. Koratzinos,
A. Blondel,
E. Gianfelice-Wendt,
F. Zimmermann
Abstract:
The FCC-ee aims to improve on electroweak precision measurements, with goals of 100 keV on the Z mass and width, and a fraction of MeV on the W mass. Compared to LEP, this implies a much improved knowledge of the centre-of-mass energy when operating at the Z peak and WW threshold. This can be achieved by making systematic use of resonant depolarization. A number of issues have been identified, due…
▽ More
The FCC-ee aims to improve on electroweak precision measurements, with goals of 100 keV on the Z mass and width, and a fraction of MeV on the W mass. Compared to LEP, this implies a much improved knowledge of the centre-of-mass energy when operating at the Z peak and WW threshold. This can be achieved by making systematic use of resonant depolarization. A number of issues have been identified, due in particular to the long polarization times. However the smaller emittance and energy spread of FCC-ee with respect to LEP should help achieve a much improved performance.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
Mitigating performance limitations of single beam-pipe circular e+e- colliders
Authors:
M. Koratzinos,
F. Zimmermann
Abstract:
Renewed interest in circular e+e- colliders has spurred designs of single beam-pipe machines, like the CEPC in China, and double beam pipe ones, such as the FCC-ee effort at CERN. Single beam-pipe designs profit from lower costs but are limited by the number of bunches that can be accommodated in the machine. We analyse these performance limitations and propose a solution that can accommodate O(10…
▽ More
Renewed interest in circular e+e- colliders has spurred designs of single beam-pipe machines, like the CEPC in China, and double beam pipe ones, such as the FCC-ee effort at CERN. Single beam-pipe designs profit from lower costs but are limited by the number of bunches that can be accommodated in the machine. We analyse these performance limitations and propose a solution that can accommodate O(1000) bunches while kee** more than 90% of the ring with a single beam pipe.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
The FCC-ee study: Progress and challenges
Authors:
M. Koratzinos,
A. Blondel,
S. Aumon,
C. Cook,
A. Doblhammer,
B. Haerer,
B. Holzer,
R. Tomas,
F. Zimmermann,
U. Wienands,
L. Medina,
M. Boscolo,
A. Bogomyagkov,
D. Shatilov,
E. Levichev
Abstract:
The FCC (Future Circular Collider) study represents a vision for the next large project in high energy physics, comprising an 80-100 km tunnel that can house a future 100 TeV hadron collider. The study also includes a high luminosity e+e- collider operating in the centre-of-mass energy range of 90-350 GeV as a possible intermediate step, the FCC-ee. The FCC-ee aims at definitive electro-weak preci…
▽ More
The FCC (Future Circular Collider) study represents a vision for the next large project in high energy physics, comprising an 80-100 km tunnel that can house a future 100 TeV hadron collider. The study also includes a high luminosity e+e- collider operating in the centre-of-mass energy range of 90-350 GeV as a possible intermediate step, the FCC-ee. The FCC-ee aims at definitive electro-weak precision measurements of the Z, W, H and top particles, and search for rare phenomena. Although FCC-ee is based on known technology, the goal performance in luminosity and energy calibration make it quite challenging. During 2014 the study went through an exploration phase. The study has now entered its second year and the aim is to produce a conceptual design report during the next three to four years. We here report on progress since the last IPAC conference.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
Transverse Polarization for Energy Calibration at the Z peak
Authors:
M. Koratzinos
Abstract:
In this paper we deal with aspects of transverse polarization for the purpose of energy calibration of proposed circular colliders like the FCC-ee and the CEPC. The main issues of such a measurement will be discussed. The possibility of using this method to accurately determine the energy at the WW threshold as well as the Z peak will be addressed. The use of wigglers for reducing long polarizatio…
▽ More
In this paper we deal with aspects of transverse polarization for the purpose of energy calibration of proposed circular colliders like the FCC-ee and the CEPC. The main issues of such a measurement will be discussed. The possibility of using this method to accurately determine the energy at the WW threshold as well as the Z peak will be addressed. The use of wigglers for reducing long polarization times will be discussed and a possible strategy will be presented for minimising the energy uncertainty error in these large machines.
△ Less
Submitted 27 January, 2015;
originally announced January 2015.
-
CEPC design performance considerations
Authors:
M. Koratzinos
Abstract:
In this paper I will commend on the early CEPC design as of October 2014. In particular I will comment on the choice of circumference, minimum and maximum energy, number of collision points and target luminosity. I will finish with suggestions to increase performance with minimum incremental cost.
In this paper I will commend on the early CEPC design as of October 2014. In particular I will comment on the choice of circumference, minimum and maximum energy, number of collision points and target luminosity. I will finish with suggestions to increase performance with minimum incremental cost.
△ Less
Submitted 27 January, 2015;
originally announced January 2015.
-
Performance limitations of circular colliders: head-on collisions
Authors:
M. Koratzinos
Abstract:
We review the different performance limitations of circular colliders, namely the limitations of energy reach, maximum attainable luminosity and beam lifetime. This paper considers only head-on collisions. We consider the range of beam energies from 45GeV to 250 GeV and collider circumferences from 20 to 100kms.
We review the different performance limitations of circular colliders, namely the limitations of energy reach, maximum attainable luminosity and beam lifetime. This paper considers only head-on collisions. We consider the range of beam energies from 45GeV to 250 GeV and collider circumferences from 20 to 100kms.
△ Less
Submitted 11 November, 2014;
originally announced November 2014.
-
LEP3: a low-cost, high-luminosity Higgs factory
Authors:
M. Koratzinos
Abstract:
The discovery of a relatively light Higgs opens up the possibility of circular e+e- Higgs factories. LEP3 is such a machine with emphasis on low cost, since it re-uses most of the LHC infrastructure, including the tunnel, cryogenics, and the two general-purpose LHC experiments Atlas and CMS, with some modifications. The energy reach of LEP3 is 240GeV in the centre of mass, close to the ZH producti…
▽ More
The discovery of a relatively light Higgs opens up the possibility of circular e+e- Higgs factories. LEP3 is such a machine with emphasis on low cost, since it re-uses most of the LHC infrastructure, including the tunnel, cryogenics, and the two general-purpose LHC experiments Atlas and CMS, with some modifications. The energy reach of LEP3 is 240GeV in the centre of mass, close to the ZH production maximum. Alternative tunnel diameters and locations are possible, including a Higgs factory housed in the UNK tunnel, UNK-L, and a machine located in a new 80 km tunnel in the Geneva region, TLEP, than can further house a very high energy pp collider. The design merits further consideration and a detailed study should be performed, so that LEP3 can be one more option available to the community for the next step in High Energy Physics.
△ Less
Submitted 11 November, 2014;
originally announced November 2014.
-
FCC-ee accelerator parameters, performance and limitations
Authors:
M. Koratzinos
Abstract:
CERN has recently launched the Future Circular Collider (FCC) study to deal with all aspects of an ambitious post-LHC possible programme. The emphasis of the study is on a 100 TeV proton collider to be housed in a 80-100 km new ring in the Geneva region. An electron machine will also be considered as a possible intermediate first step (FCC-ee). The study benefits from earlier work done in the cont…
▽ More
CERN has recently launched the Future Circular Collider (FCC) study to deal with all aspects of an ambitious post-LHC possible programme. The emphasis of the study is on a 100 TeV proton collider to be housed in a 80-100 km new ring in the Geneva region. An electron machine will also be considered as a possible intermediate first step (FCC-ee). The study benefits from earlier work done in the context of TLEP and has already published a parameter table, to serve as the basis for the work to be done. The study aims to publish a conceptual design report at around 2018. The recent discovery of a light Higgs boson has opened up considerable interest in circular e+e- Higgs factories around the world. FCC-ee is capable of very high luminosities in a wide centre-of-mass (ECM) spectrum from 90 to 350 GeV. This allows the very precise study of the Z, W and H bosons as well as the top quark, allowing for meaningful precision tests of the closure of the Standard Model.
△ Less
Submitted 11 November, 2014;
originally announced November 2014.
-
First Look at the Physics Case of TLEP
Authors:
M. Bicer,
H. Duran Yildiz,
I. Yildiz,
G. Coignet,
M. Delmastro,
T. Alexopoulos,
C. Grojean,
S. Antusch,
T. Sen,
H. -J. He,
K. Potamianos,
S. Haug,
A. Moreno,
A. Heister,
V. Sanz,
G. Gomez-Ceballos,
M. Klute,
M. Zanetti,
L. -T. Wang,
M. Dam,
C. Boehm,
N. Glover,
F. Krauss,
A. Lenz,
M. Syphers
, et al. (106 additional authors not shown)
Abstract:
The discovery by the ATLAS and CMS experiments of a new boson with mass around 125 GeV and with measured properties compatible with those of a Standard-Model Higgs boson, coupled with the absence of discoveries of phenomena beyond the Standard Model at the TeV scale, has triggered interest in ideas for future Higgs factories. A new circular e+e- collider hosted in a 80 to 100 km tunnel, TLEP, is a…
▽ More
The discovery by the ATLAS and CMS experiments of a new boson with mass around 125 GeV and with measured properties compatible with those of a Standard-Model Higgs boson, coupled with the absence of discoveries of phenomena beyond the Standard Model at the TeV scale, has triggered interest in ideas for future Higgs factories. A new circular e+e- collider hosted in a 80 to 100 km tunnel, TLEP, is among the most attractive solutions proposed so far. It has a clean experimental environment, produces high luminosity for top-quark, Higgs boson, W and Z studies, accommodates multiple detectors, and can reach energies up to the t-tbar threshold and beyond. It will enable measurements of the Higgs boson properties and of Electroweak Symmetry-Breaking (EWSB) parameters with unequalled precision, offering exploration of physics beyond the Standard Model in the multi-TeV range. Moreover, being the natural precursor of the VHE-LHC, a 100 TeV hadron machine in the same tunnel, it builds up a long-term vision for particle physics. Altogether, the combination of TLEP and the VHE-LHC offers, for a great cost effectiveness, the best precision and the best search reach of all options presently on the market. This paper presents a first appraisal of the salient features of the TLEP physics potential, to serve as a baseline for a more extensive design study.
△ Less
Submitted 11 December, 2013; v1 submitted 28 August, 2013;
originally announced August 2013.
-
Comments on "Wall-plug (AC) power consumption of a very high energy e+/e- storage ring collider" by Marc Ross
Authors:
A. Blondel,
M. Koratzinos,
A. Butterworth,
P. Janot,
F. Zimmermann,
R. Aleksan,
P. Azzi,
J. Ellis,
M. Klute,
M. Zanetti
Abstract:
The paper arXiv:1308.0735 questions some of the technical assumptions made by the TLEP Steering Group when estimating in arXiv:1305.6498 the power requirement for the very high energy e+e- storage ring collider TLEP. We show that our assumptions are based solidly on CERN experience with LEP and the LHC, as well accelerators elsewhere, and confirm our earlier baseline estimate of the TLEP power con…
▽ More
The paper arXiv:1308.0735 questions some of the technical assumptions made by the TLEP Steering Group when estimating in arXiv:1305.6498 the power requirement for the very high energy e+e- storage ring collider TLEP. We show that our assumptions are based solidly on CERN experience with LEP and the LHC, as well accelerators elsewhere, and confirm our earlier baseline estimate of the TLEP power consumption.
△ Less
Submitted 12 August, 2013;
originally announced August 2013.
-
TLEP, first step in a long-term vision for HEP
Authors:
M. Koratzinos,
A. P. Blondel,
R. Aleksan,
P. Janot,
F. Zimmermann,
J. R. Ellis,
M. Zanetti
Abstract:
The discovery of H(126) has renewed interest in circular e+e- colliders that can operate as Higgs factories, which benefit from three unique characteristics: i) high luminosity and reliability, ii) the availability of several interaction points, iii) superior beam energy accuracy. TLEP is an e+e- storage ring of 80-km circumference that can operate with very high luminosity from the Z peak (90 GeV…
▽ More
The discovery of H(126) has renewed interest in circular e+e- colliders that can operate as Higgs factories, which benefit from three unique characteristics: i) high luminosity and reliability, ii) the availability of several interaction points, iii) superior beam energy accuracy. TLEP is an e+e- storage ring of 80-km circumference that can operate with very high luminosity from the Z peak (90 GeV) to the top quark pair threshold (350 GeV). It can achieve transverse beam polarization at the Z peak and WW threshold, giving it unparalleled accuracy on the beam energy. A preliminary study indicates that an 80 km tunnel could be constructed around CERN. Such a tunnel would allow a 100 TeV proton-proton collider to be established in the same ring (VHE-LHC), offering a long term vision.
△ Less
Submitted 25 June, 2013;
originally announced June 2013.
-
TLEP: A High-Performance Circular e+e- Collider to Study the Higgs Boson
Authors:
M. Koratzinos,
A. P. Blondel,
R. Aleksan,
O. Brunner,
A. Butterworth,
P. Janot,
E. Jensen,
J. Osborne,
F. Zimmermann,
J. R. Ellis,
M. Zanetti
Abstract:
The recent discovery of a light Higgs boson has opened up considerable interest in circular e+e- Higgs factories around the world. We report on the progress of the TLEP concept since last year. TLEP is an e+e- circular collider capable of very high luminosities in a wide centre-of-mass (ECM) spectrum from 90 to 350 GeV. TLEP could be housed in a new 80 to 100 km tunnel in the Geneva region. The de…
▽ More
The recent discovery of a light Higgs boson has opened up considerable interest in circular e+e- Higgs factories around the world. We report on the progress of the TLEP concept since last year. TLEP is an e+e- circular collider capable of very high luminosities in a wide centre-of-mass (ECM) spectrum from 90 to 350 GeV. TLEP could be housed in a new 80 to 100 km tunnel in the Geneva region. The design can be adapted to different ring circumference (e.g. LEP3 in the 27 km LHC tunnel). TLEP is an ideal complementary machine to the LHC thanks to high luminosity, exquisite determination of ECM and the possibility of four interaction points, both for precision measurements of the Higgs boson properties and for precision tests of the closure of the Standard Model from the Z pole to the top threshold.
△ Less
Submitted 28 May, 2013;
originally announced May 2013.
-
A High Luminosity e+e- Collider to study the Higgs Boson
Authors:
A. Blondel,
M. Koratzinos,
R. W. Assmann,
A. Butterworth,
P. Janot,
J. M. Jimenez,
C. Grojean,
A. Milanese,
M. Modena,
J. A. Osborne,
F. Zimmermann,
H. Piekarz,
K. Oide,
K. Yokoya,
J. Ellis,
M. Klute,
M. Zanetti,
M. Velasco,
V. Telnov,
L. Rivkin,
Y. Cai
Abstract:
A strong candidate for the Standard Model Scalar boson, H(126), has been discovered by the Large Hadron Collider (LHC) experiments. In order to study this fundamental particle with unprecedented precision, and to perform precision tests of the closure of the Standard Model, we investigate the possibilities offered by An e+e- storage ring collider. We use a design inspired by the B-factories, takin…
▽ More
A strong candidate for the Standard Model Scalar boson, H(126), has been discovered by the Large Hadron Collider (LHC) experiments. In order to study this fundamental particle with unprecedented precision, and to perform precision tests of the closure of the Standard Model, we investigate the possibilities offered by An e+e- storage ring collider. We use a design inspired by the B-factories, taking into account the performance achieved at LEP2, and imposing a synchrotron radiation power limit of 100 MW. At the most relevant centre-of-mass energy of 240 GeV, near-constant luminosities of 10^34 cm^{-2}s^{-1} are possible in up to four collision points for a ring of 27km circumference. The achievable luminosity increases with the bending radius, and for 80km circumference, a luminosity of 5 10^34 cm^{-2}s^{-1} in four collision points appears feasible. Beamstrahlung becomes relevant at these high luminosities, leading to a design requirement of large momentum acceptance both in the accelerating system and in the optics. The larger machine could reach the top quark threshold, would yield luminosities per interaction point of 10^36 cm^{-2}s^{-1} at the Z pole (91 GeV) and 2 10^35 cm^{-2}s^{-1} at the W pair production threshold (80 GeV per beam). The energy spread is reduced in the larger ring with respect to what is was at LEP, giving confidence that beam polarization for energy calibration purposes should be available up to the W pair threshold. The capabilities in term of physics performance are outlined.
△ Less
Submitted 1 April, 2013; v1 submitted 2 August, 2012;
originally announced August 2012.
