-
Towards the reproducible fabrication of conductive ferroelectric domain walls into lithium niobate bulk single crystals
Authors:
Julius Ratzenberger,
Iuliia Kiseleva,
Boris Koppitz,
Elke Beyreuther,
Manuel Zahn,
Joshua Gössel,
Peter A. Hegarty,
Zeeshan H. Amber,
Michael Rüsing,
Lukas M. Eng
Abstract:
Ferroelectric domain walls (DWs) are promising structures for assembling future nano-electronic circuit elements on a larger scale, since reporting domain wall currents of up to 1 mA per single DW. One key requirement hereto is their reproducible manufacturing by gaining preparative control over domain size and domain wall conductivity (DWC). To date, most works on DWC have focused on exploring th…
▽ More
Ferroelectric domain walls (DWs) are promising structures for assembling future nano-electronic circuit elements on a larger scale, since reporting domain wall currents of up to 1 mA per single DW. One key requirement hereto is their reproducible manufacturing by gaining preparative control over domain size and domain wall conductivity (DWC). To date, most works on DWC have focused on exploring the fundamental electrical properties of individual DWs within single shot experiments, with emphasis on quantifying the origins for DWC. Very few reports exist when it comes to compare the DWC properties between two separate DWs, and literally nothing exists where issues of reproducibility in DWC devices have been addressed. To fill this gap while facing the challenge of finding guidelines achieving predictable DWC performance, we report on a procedure that allows us to reproducibly prepare single hexagonal domains of a predefined diameter into uniaxial ferroelectric (FE) lithium niobate (LN) single crystals of 200 and 300 micrometers thickness, respectively. We show that the domain diameter can be controlled with an error of a few percent. As-grown DWs are then subjected to a standard procedure of current-controlled high-voltage DWC enhancement, repetitively reaching a DWC increase of 6 orders of magnitude. While all resulting DWs show significantly enhanced DWC values, subtle features in their individual current-voltage (I-V) characteristics hint towards different 3D shapes into the bulk, with variations probably reflecting local heterogeneities by defects, DW pinning, and surface-near DW inclination, which seem to have a larger impact than expected.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Surface-near domain engineering in multi-domain x-cut lithium niobate tantalate mixed crystals
Authors:
Laura Bollmers,
Tobias Babai-Hemati,
Boris Koppitz,
Christof Eigner,
Laura Padberg,
Michael Ruesing,
Lukas M. Eng,
Christine Silberhorn
Abstract:
Lithium niobate and lithium tantalate are among the most widespread materials for nonlinear, integrated photonics. Mixed crystals with arbitrary Nb-Ta ratios provide a new degree of freedom to tune materials properties, such as the birefringence, but also leverage the advantages of the singular compounds, for example, by combining the thermal stability of lithium tantalate with the larger nonlinea…
▽ More
Lithium niobate and lithium tantalate are among the most widespread materials for nonlinear, integrated photonics. Mixed crystals with arbitrary Nb-Ta ratios provide a new degree of freedom to tune materials properties, such as the birefringence, but also leverage the advantages of the singular compounds, for example, by combining the thermal stability of lithium tantalate with the larger nonlinear or piezoelectric constants of lithium niobate. Periodic poling is the prerequisite for any nonlinear optical application. For mixed crystals this has been challenging so far due to the lack of homogeneous, mono-domain crystals, which severely inhibit domain growth and nucleation. In this work we demonstrate that surface-near ($< 1$~$μ$m depth) periodic poling on x-cut lithium niobate tantalate mixed crystals can be achieved via electric field poling and lithographically structured electrodes. We find that naturally occurring head-to-head or tail-to-tail domain walls in the as-grown crystal inhibit domain inversion at a larger scale. However, periodic poling is possible, if the gap size between the poling electrodes is of the same order of magnitude or smaller than the average size of naturally occurring domains. This work provides the basis for the nonlinear optical application of lithium niobate tantalate mixed crystals.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Comparative study of photo-induced electronic transport along ferroelectric domain walls in lithium niobate single crystals
Authors:
Lili Ding,
Elke Beyreuther,
Boris Koppitz,
Konrad Kempf,
Jianhua Ren,
Wei** Chen,
Michael Rüsing,
Yue Zheng,
Lukas M. Eng
Abstract:
Ferroelectric domain wall conductivity (DWC) is an intriguing functional property, that can be controlled through external stimuli such as electric and mechanical fields. Optical-field control, as a non-invasive flexible handle, has rarely been applied so far, but significantly expands the possibility for both tuning and probing DWC. On the one hand, as known from Second-Harmonic, Raman, and CARS…
▽ More
Ferroelectric domain wall conductivity (DWC) is an intriguing functional property, that can be controlled through external stimuli such as electric and mechanical fields. Optical-field control, as a non-invasive flexible handle, has rarely been applied so far, but significantly expands the possibility for both tuning and probing DWC. On the one hand, as known from Second-Harmonic, Raman, and CARS micro-spectroscopy, the optical in-and-out approach delivers parameters on the DW distribution, the DW inclination, and probes the DW vibrational modes; on the other hand, photons might be applied also to directly generate charge carriers within the DW, hence acting as a functional and spectrally tunable probe to deduce the integral or local absorption properties and bandgaps of conductive DWs. Here, we report on such an optoelectronic approach by investigating the photo-induced DWC (PI-DWC) in DWs of the model system lithium niobate, a material that is well known for hosting conductive DWs. We compare three different crystals containing different numbers of domain walls: (A) none, (B) one, and (C) many conductive DWs. All samples are inspected for their current-voltage (I-V) behavior (i) in darkness, and (ii) for different illumination wavelengths swept from 500 nm down to 310 nm. All samples show their maximum PI-DWC at 310 nm, i.e., at the optical bandgap of lithium niobate; moreover, sample (C) reaches PI-DWCs of several $μ$A. Interestingly, a noticeable PI-DWC is also observed for sub-bandgap illumination, i.e., wavelengths as high as 500 nm, hinting towards the existence and decisive role of electronic in-gap states that contribute to the electronic transport along DWs. Finally, conductive atomic force microscopy (c-AFM) investigations under illumination proved that the PI-DWC is confined to the DW area, and does not originate from photo-induced bulk conductivity.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
The design and performance of the ZEUS Micro Vertex detector
Authors:
A. Polini,
I. Brock,
S. Goers,
A. Kappes,
U. F. Katz,
E. Hilger,
J. Rautenberg,
A. Weber,
A. Mastroberardino,
E. Tassi,
V. Adler,
L. A. T. Bauerdick,
I. Bloch,
T. Haas,
U. Klein,
U. Koetz,
G. Kramberger,
E. Lobodzinska,
R. Mankel,
J. Ng,
D. Notz,
M. C. Petrucci,
B. Surrow,
G. Watt,
C. Youngman
, et al. (57 additional authors not shown)
Abstract:
In order to extend the tracking acceptance, to improve the primary and secondary vertex reconstruction and thus enhancing the tagging capabilities for short lived particles, the ZEUS experiment at the HERA Collider at DESY installed a silicon strip vertex detector. The barrel part of the detector is a 63 cm long cylinder with silicon sensors arranged around an elliptical beampipe. The forward pa…
▽ More
In order to extend the tracking acceptance, to improve the primary and secondary vertex reconstruction and thus enhancing the tagging capabilities for short lived particles, the ZEUS experiment at the HERA Collider at DESY installed a silicon strip vertex detector. The barrel part of the detector is a 63 cm long cylinder with silicon sensors arranged around an elliptical beampipe. The forward part consists of four circular shaped disks. In total just over 200k channels are read out using $2.9 {\rm m^2}$ of silicon. In this report a detailed overview of the design and construction of the detector is given and the performance of the completed system is reviewed.
△ Less
Submitted 21 August, 2007;
originally announced August 2007.
-
Beam Test of Silicon Strip Sensors for the ZEUS Micro Vertex Detector
Authors:
L. A. T. Bauerdick,
E. Borsato,
C. Burgard,
T. Carli,
R. Carlin,
M. Casaro,
V. Chiochia,
F. Dal Corso,
D. Dannheim,
A. Garfagnini,
A. Kappes,
R. Klanner,
E. Koffeman,
B. Koppitz,
U. Koetz,
E. Maddox,
M. Milite,
M. Moritz,
J. S. T. Ng,
M. C. Petrucci,
I. Redondo,
J. Rautenberg,
H. Tiecke,
M. Turcato,
J. J. Velthuis
, et al. (1 additional authors not shown)
Abstract:
For the HERA upgrade, the ZEUS experiment has designed and installed a high precision Micro Vertex Detector (MVD) using single sided micro-strip sensors with capacitive charge division. The sensors have a readout pitch of 120 microns, with five intermediate strips (20 micron strip pitch). An extensive test program has been carried out at the DESY-II testbeam facility. In this paper we describe t…
▽ More
For the HERA upgrade, the ZEUS experiment has designed and installed a high precision Micro Vertex Detector (MVD) using single sided micro-strip sensors with capacitive charge division. The sensors have a readout pitch of 120 microns, with five intermediate strips (20 micron strip pitch). An extensive test program has been carried out at the DESY-II testbeam facility. In this paper we describe the setup developed to test the ZEUS MVD sensors and the results obtained on both irradiated and non-irradiated single sided micro-strip detectors with rectangular and trapezoidal geometries. The performances of the sensors coupled to the readout electronics (HELIX chip, version 2.2) have been studied in detail, achieving a good description by a Monte Carlo simulation. Measurements of the position resolution as a function of the angle of incidence are presented, focusing in particular on the comparison between standard and newly developed reconstruction algorithms.
△ Less
Submitted 16 December, 2002;
originally announced December 2002.
