-
Bayesian Model Averaging (BMA) for nuclear data evaluation
Authors:
E. Alhassan,
D. Rochman,
G. Schnabel,
A. J. Koning
Abstract:
To ensure agreement between theoretical calculations and experimental data, parameters to selected nuclear physics models, are perturbed, and fine-tuned in nuclear data evaluations. This approach assumes that the chosen set of models accurately represents the `true' distribution. Furthermore, the models are chosen globally, indicating their applicability across the entire energy range of interest.…
▽ More
To ensure agreement between theoretical calculations and experimental data, parameters to selected nuclear physics models, are perturbed, and fine-tuned in nuclear data evaluations. This approach assumes that the chosen set of models accurately represents the `true' distribution. Furthermore, the models are chosen globally, indicating their applicability across the entire energy range of interest. However, this approach overlooks uncertainties inherent in the models themselves. As a result, achieving satisfactory fits to experimental data within certain energy regions for specific channels becomes challenging, as the evaluation is constrained by the deficiencies of the selected models. In this work, we propose that instead of selecting globally a winning model set and proceeding with it as if it was the `true' model set, we instead, take a weighted average over multiple models within a BMA framework, each weighted by its posterior probability. The method involves executing a set of TALYS calculations by randomly varying multiple nuclear physics models and their parameters to yield a vector of calculated observables. Next, the likelihood function was computed at each considered incident energy point for selected cross sections by comparing the vector of calculated observables with that of the selected differential experimental data. As the cross sections and elastic angular distributions were updated locally on a per-energy-point basis, the approach typically results in discontinuities or "kinks" in the curves, and these were addressed using spline interpolation. The proposed BMA method was applied to the evaluation of proton induced reactions on $^{58}$Ni within 1 - 100 MeV. The results demonstrate favorable comparisons with experimental data, as well as with the TENDL-2021 evaluation.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
FENDL: A library for fusion research and applications
Authors:
G. Schnabel,
D. L. Aldama,
T. Bohm,
U. Fischer,
S. Kunieda,
A. Trkov,
C. Konno,
R. Capote,
A. J. Koning,
S. Breidokaite,
T. Eade,
M. Fabbri,
D. Flammini,
L. Isolan,
I. Kodeli,
M. Košťál,
S. Kwon,
D. Laghi,
D. Leichtle,
S. Nakayama,
M. Ohta,
L. W. Packer,
Y. Qiu,
S. Sato,
M. Sawan
, et al. (6 additional authors not shown)
Abstract:
The Fusion Evaluated Nuclear Data Library (FENDL) is a comprehensive and validated collection of nuclear cross section data coordinated by the International Atomic Energy Agency (IAEA) Nuclear Data Section (NDS). FENDL assembles the best nuclear data for fusion applications selected from available nuclear data libraries and has been under development for decades. FENDL contains sub-libraries for i…
▽ More
The Fusion Evaluated Nuclear Data Library (FENDL) is a comprehensive and validated collection of nuclear cross section data coordinated by the International Atomic Energy Agency (IAEA) Nuclear Data Section (NDS). FENDL assembles the best nuclear data for fusion applications selected from available nuclear data libraries and has been under development for decades. FENDL contains sub-libraries for incident neutron, proton, and deuteron cross sections including general purpose and activation files used for particle transport and nuclide inventory calculations.
We describe the history, selection of evaluations for the various sub-libraries (neutron, proton, deuteron) with the focus on transport and reactor dosimetry applications, the processing of the nuclear data for application codes, and the development of the TENDL-2017 library which is the currently recommended activation library for FENDL. We briefly describe the IAEA IRDFF library as the recommended library for dosimetry fusion applications. We also present work on validation of the neutron sub-library using a variety of fusion relevant computational and experimental benchmarks. A variety of cross section libraries are used for the validation work including FENDL-2.1, FENDL-3.1d, FENDL-3.2, ENDF/B-VIII.0, and JEFF-3.2 with the emphasis on the FENDL libraries. The results of the experimental validation showed that the performance of FENDL-3.2b is at least as good and in most cases better than FENDL-2.1.
Future work will consider improved evaluations developed by the International Nuclear Data Evaluation Network (INDEN). Additional work will be needed to investigate differences in gas production in structural materials. Covariance matrices need to be updated to support the development of fusion technology. Additional validation work for high-energy neutrons, protons and deuterons, and the activation library will be needed.
△ Less
Submitted 17 November, 2023; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Compilation of isomeric ratios of light particle induced nuclear reactions
Authors:
A. Rodrigo,
N. Otuka,
S. Takács,
A. J. Koning
Abstract:
Experimental isomeric ratios of light (A$\le$4) particle-induced nuclear reactions were compiled for the product nuclides having metastable states with half-lives longer than 0.1 sec. The experimental isomeric ratio data were taken from the EXFOR library and reviewed. When an experiment reports isomer production cross sections instead of isomeric ratios, the cross sections taken from the EXFOR lib…
▽ More
Experimental isomeric ratios of light (A$\le$4) particle-induced nuclear reactions were compiled for the product nuclides having metastable states with half-lives longer than 0.1 sec. The experimental isomeric ratio data were taken from the EXFOR library and reviewed. When an experiment reports isomer production cross sections instead of isomeric ratios, the cross sections taken from the EXFOR library were converted to the isomeric ratios by us. During compilation, questionable data (e.g.,preliminary data compiled in EXFOR in parallel with their final data, sum of isomer production cross sections larger than the total production cross sections) were excluded. As an application of the new compilation, goodness-of-fit was studied for the isomeric ratios predicted by the reaction model code TALYS-1.96.
△ Less
Submitted 8 August, 2023; v1 submitted 16 March, 2023;
originally announced March 2023.
-
Multi-Atlas Segmentation and Spatial Alignment of the Human Embryo in First Trimester 3D Ultrasound
Authors:
W. A. P. Bastiaansen,
M. Rousian,
R. P. M. Steegers-Theunissen,
W. J. Niessen,
A. H. J. Koning,
S. Klein
Abstract:
Segmentation and spatial alignment of ultrasound (US) imaging data acquired in the in first trimester are crucial for monitoring human embryonic growth and development throughout this crucial period of life. Current approaches are either manual or semi-automatic and are therefore very time-consuming and prone to errors. To automate these tasks, we propose a multi-atlas framework for automatic segm…
▽ More
Segmentation and spatial alignment of ultrasound (US) imaging data acquired in the in first trimester are crucial for monitoring human embryonic growth and development throughout this crucial period of life. Current approaches are either manual or semi-automatic and are therefore very time-consuming and prone to errors. To automate these tasks, we propose a multi-atlas framework for automatic segmentation and spatial alignment of the embryo using deep learning with minimal supervision. Our framework learns to register the embryo to an atlas, which consists of the US images acquired at a range of gestational age (GA), segmented and spatially aligned to a predefined standard orientation. From this, we can derive the segmentation of the embryo and put the embryo in standard orientation. US images acquired at 8+0 till 12+6 weeks GA were used and eight subjects were selected as atlas. We evaluated different fusion strategies to incorporate multiple atlases: 1) training the framework using atlas images from a single subject, 2) training the framework with data of all available atlases and 3) ensembling of the frameworks trained per subject. To evaluate the performance, we calculated the Dice score over the test set. We found that training the framework using all available atlases outperformed ensembling and gave similar results compared to the best of all frameworks trained on a single subject. Furthermore, we found that selecting images from the four atlases closest in GA out of all available atlases, regardless of the individual quality, gave the best results with a median Dice score of 0.72. We conclude that our framework can accurately segment and spatially align the embryo in first trimester 3D US images and is robust for the variation in quality that existed in the available atlases.
△ Less
Submitted 28 August, 2023; v1 submitted 14 February, 2022;
originally announced February 2022.
-
Quantifying the uncertainty in CME kinematics derived from geometric modelling of Heliospheric Imager data
Authors:
Luke Barnard,
Mathew Owens,
Christopher J. Scott,
Mike Lockwood,
Curt A. de Koning,
Tanja Amerstorfer,
Jürgen Hinterreiter,
Christian Möstl,
Jackie Davies,
Pete Riley
Abstract:
Geometric modelling of Coronal Mass Ejections (CMEs) is a widely used tool for assessing their kinematic evolution. Furthermore, techniques based on geometric modelling, such as ELEvoHI, are being developed into forecast tools for space weather prediction. These models assume that solar wind structure does not affect the evolution of the CME, which is an unquantified source of uncertainty. We use…
▽ More
Geometric modelling of Coronal Mass Ejections (CMEs) is a widely used tool for assessing their kinematic evolution. Furthermore, techniques based on geometric modelling, such as ELEvoHI, are being developed into forecast tools for space weather prediction. These models assume that solar wind structure does not affect the evolution of the CME, which is an unquantified source of uncertainty. We use a large number of Cone CME simulations with the HUXt solar wind model to quantify the scale of uncertainty introduced into geometric modelling and the ELEvoHI CME arrival times by solar wind structure. We produce a database of simulations, representing an average, a fast, and an extreme CME scenario, each independently propagating through 100 different ambient solar wind environments. Synthetic heliospheric imager observations of these simulations are then used with a range of geometric models to estimate the CME kinematics. The errors of geometric modelling depend on the location of the observer, but do not seem to depend on the CME scenario. In general, geometric models are biased towards predicting CME apex distances that are larger than the true value. For these CME scenarios, geometric modelling errors are minimised for an observer in the L5 region. Furthermore, geometric modelling errors increase with the level of solar wind structure in the path of the CME. The ELEvoHI arrival time errors are minimised for an observer in the L5 region, with mean absolute arrival time errors of $8.2\pm1.2$~h, $8.3\pm1.0$~h, and $5.8\pm0.9$~h for the average, fast, and extreme CME scenarios.
△ Less
Submitted 26 November, 2021;
originally announced November 2021.
-
Nuclear data evaluation with Bayesian networks
Authors:
Georg Schnabel,
Roberto Capote,
Arjan Koning,
David Brown
Abstract:
Bayesian networks are graphical models to represent the probabilistic relationships between variables in the Bayesian framework. The knowledge of all variables can be updated using new information about some of the variables. We show that relying on the Bayesian network interpretation enables large scale inference and gives flexibility in incorporating prior assumptions and constraints into the nu…
▽ More
Bayesian networks are graphical models to represent the probabilistic relationships between variables in the Bayesian framework. The knowledge of all variables can be updated using new information about some of the variables. We show that relying on the Bayesian network interpretation enables large scale inference and gives flexibility in incorporating prior assumptions and constraints into the nuclear data evaluation process, such as sum rules and the non-negativity of cross sections. The latter constraint is accounted for by a non-linear transformation and therefore we also discuss inference in Bayesian networks with non-linear relationships. Using Bayesian networks, the evaluation process yields detailed information, such as posterior estimates and uncertainties of all statistical and systematic errors. We also elaborate on a sparse Gaussian process construction compatible with the Bayesian network framework that can for instance be used as prior on energy-dependent model parameters, model deficiencies and energy-dependent systematic errors of experiments. We present three proof-of-concept examples that emerged in the context of the neutron data standards project and in the ongoing international evaluation efforts of $^{56}$Fe. In the first example we demonstrate the modelization and explicit estimation of relative energy-dependent error components of experimental datasets. Then we show an example evaluation using the outlined Gaussian process construction in an evaluation of $^{56}$Fe in the energy range between one and two MeV, where R-Matrix and nuclear model fits are difficult. Finally, we present a model-based evaluation of $^{56}$Fe between 5 MeV and 30 MeV with a sound treatment of model deficiencies. The R scripts to reproduce the Bayesian network examples and the nucdataBaynet package for Bayesian network modeling and inference have been made publicly available.
△ Less
Submitted 19 October, 2021;
originally announced October 2021.
-
Measurement and Modeling of Proton-Induced Reactions on Arsenic from 35 to 200 MeV
Authors:
Morgan B. Fox,
Andrew S. Voyles,
Jonathan T. Morrell,
Lee A. Bernstein,
Jon C. Batchelder,
Eva R. Birnbaum,
Cathy S. Cutler,
Arjan J. Koning,
Amanda M. Lewis,
Dmitri G. Medvedev,
Francois M. Nortier,
Ellen M. O'Brien,
Christiaan Vermeulen
Abstract:
$^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}…
▽ More
$^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}$Se have insufficient nuclear data for efficient production using regional 100-200 MeV high-intensity proton accelerators. In order to address this deficiency, stacked-target irradiations were performed at LBNL, LANL, and BNL to measure the production of the $^{72}$Se/$^{72}$As PET generator system via $^{75}$As(p,x) between 35 and 200 MeV. This work provides the most well-characterized excitation function for $^{75}$As(p,4n)$^{72}$Se starting from threshold. Additional focus was given to report the first measurements of $^{75}$As(p,x)$^{68}$Ge and bolster an already robust production capability for the highly valuable $^{68}$Ge/$^{68}$Ga PET generator. Thick target yield comparisons with prior established formation routes to both generators are made. In total, high-energy proton-induced cross sections are reported for 55 measured residual products from $^{75}$As, Cu, and Ti targets, where the latter two materials were present as monitor foils. These results were compared with literature data as well as the default theoretical calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. Reaction modeling at these energies is typically unsatisfactory due to few prior published data and many interacting physics models. Therefore, a detailed assessment of the TALYS code was performed with simultaneous parameter adjustments applied according to a standardized procedure. Particular attention was paid to the formulation of the two-component exciton model in the transition between the compound and pre-equilibrium regions, with a linked investigation of level density models for nuclei off of stability and their impact on modeling predictive power.
△ Less
Submitted 11 June, 2021; v1 submitted 8 June, 2021;
originally announced June 2021.
-
Investigating High-Energy Proton-Induced Reactions on Spherical Nuclei: Implications for the Pre-Equilibrium Exciton Model
Authors:
Morgan B. Fox,
Andrew S. Voyles,
Jonathan T. Morrell,
Lee A. Bernstein,
Amanda M. Lewis,
Arjan J. Koning,
Jon C. Batchelder,
Eva R. Birnbaum,
Cathy S. Cutler,
Dmitri G. Medvedev,
Francois M. Nortier,
Ellen M. O'Brien,
Christiaan Vermeulen
Abstract:
A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction m…
▽ More
A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction modes and a lack of existing guiding cross section data. A Tri-lab collaboration has been formed among the Lawrence Berkeley, Los Alamos, and Brookhaven National Laboratories to address these complexities by characterizing charged-particle nuclear reactions relevant to the production of established and novel radioisotopes. In the inaugural collaboration experiments, stacked-targets of niobium foils were irradiated at the Brookhaven Linac Isotope Producer (E$_p$=200 MeV) and the Los Alamos Isotope Production Facility (E$_p$=100 MeV) to measure $^{93}$Nb(p,x) cross sections between 50 and 200 MeV. The measured cross-section results were compared with literature data as well as the default calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. We developed a standardized procedure that determines the reaction model parameters that best reproduce the most prominent reaction channels in a physically justifiable manner. The primary focus of the procedure was to determine the best parametrization for the pre-equilibrium two-component exciton model. This modeling study revealed a trend toward a relative decrease for internal transition rates at intermediate proton energies (E$_p$=20-60 MeV) in the current exciton model as compared to the default values. The results of this work are instrumental for the planning, execution, and analysis essential to isotope production.
△ Less
Submitted 5 April, 2021; v1 submitted 24 October, 2020;
originally announced October 2020.
-
Conception and software implementation of a nuclear data evaluation pipeline
Authors:
Georg Schnabel,
Henrik Sjöstrand,
Joachim Hansson,
Dimitri Rochman,
Arjan Koning,
Roberto Capote
Abstract:
We discuss the design and software implementation of a nuclear data evaluation pipeline applied for a fully reproducible evaluation of neutron-induced cross sections of $^{56}$Fe above the resolved resonance region using the nuclear model code TALYS combined with relevant experimental data. The emphasis is on the mathematical and technical aspects of the pipeline and not on the evaluation of…
▽ More
We discuss the design and software implementation of a nuclear data evaluation pipeline applied for a fully reproducible evaluation of neutron-induced cross sections of $^{56}$Fe above the resolved resonance region using the nuclear model code TALYS combined with relevant experimental data. The emphasis is on the mathematical and technical aspects of the pipeline and not on the evaluation of $^{56}$Fe, which is tentative. The mathematical building blocks combined and employed in the pipeline are discussed in detail. A unified representation of experimental data, systematic and statistical errors, model parameters and defects enables the application of the Generalized Least Squares (GLS) and its natural extension, the Levenberg-Marquardt (LM) algorithm, on a large collection of experimental data. The LM algorithm tailored to nuclear data evaluation accounts for the exact non-linear physics model to determine best estimates of nuclear quantities. Associated uncertainty information is derived from a Taylor expansion at the maximum of the posterior distribution. We also discuss the pipeline in terms of its IT (=information technology) building blocks, such as those to efficiently manage and retrieve experimental data of the EXFOR library and to distribute computations on a scientific cluster. Relying on the mathematical and IT building blocks, we elaborate on the sequence of steps in the pipeline to perform the evaluation, such as the retrieval of experimental data, the correction of experimental uncertainties using marginal likelihood optimization (MLO) and after a screening of thousand TALYS parameters -- including Gaussian process priors on energy dependent parameters -- the fitting of about 150 parameters using the LM algorithm. The code of the pipeline including a manual and a Dockerfile for a simplified installation is available at www.nucleardata.com.
△ Less
Submitted 5 May, 2021; v1 submitted 1 September, 2020;
originally announced September 2020.
-
Towards segmentation and spatial alignment of the human embryonic brain using deep learning for atlas-based registration
Authors:
Wietske A. P. Bastiaansen,
Melek Rousian,
Régine P. M. Steegers-Theunissen,
Wiro J. Niessen,
Anton Koning,
Stefan Klein
Abstract:
We propose an unsupervised deep learning method for atlas based registration to achieve segmentation and spatial alignment of the embryonic brain in a single framework. Our approach consists of two sequential networks with a specifically designed loss function to address the challenges in 3D first trimester ultrasound. The first part learns the affine transformation and the second part learns the…
▽ More
We propose an unsupervised deep learning method for atlas based registration to achieve segmentation and spatial alignment of the embryonic brain in a single framework. Our approach consists of two sequential networks with a specifically designed loss function to address the challenges in 3D first trimester ultrasound. The first part learns the affine transformation and the second part learns the voxelwise nonrigid deformation between the target image and the atlas. We trained this network end-to-end and validated it against a ground truth on synthetic datasets designed to resemble the challenges present in 3D first trimester ultrasound. The method was tested on a dataset of human embryonic ultrasound volumes acquired at 9 weeks gestational age, which showed alignment of the brain in some cases and gave insight in open challenges for the proposed method. We conclude that our method is a promising approach towards fully automated spatial alignment and segmentation of embryonic brains in 3D ultrasound.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
HPRL -- International cooperation to identify and monitor priority nuclear data needs for nuclear applications
Authors:
E. Dupont,
M. Bossant,
R. Capote,
A. D. Carlson,
Y. Danon,
M. Fleming,
Z. Ge,
H. Harada,
O. Iwamoto,
N. Iwamoto,
A. Kimura,
A. J. Koning,
C. Massimi,
A. Negret,
G. Noguere,
A. Plompen,
V. Pronyaev,
G. Rimpault,
S. Simakov,
A. Stankovskiy,
W. Sun,
A. Trkov,
H. Wu,
K. Yokoyama
Abstract:
The OECD-NEA High Priority Request List (HPRL) is a point of reference to guide and stimulate the improvement of nuclear data for nuclear energy and other applications, and a tool to bridge the gap between data users and producers. The HPRL is application-driven and the requests are submitted by nuclear data users or representatives of the user's communities. A panel of international experts revie…
▽ More
The OECD-NEA High Priority Request List (HPRL) is a point of reference to guide and stimulate the improvement of nuclear data for nuclear energy and other applications, and a tool to bridge the gap between data users and producers. The HPRL is application-driven and the requests are submitted by nuclear data users or representatives of the user's communities. A panel of international experts reviews and monitors the requests in the framework of an Expert Group mandated by the NEA Nuclear Science Committee Working Party on International Nuclear Data Evaluation Cooperation (WPEC). After approval, individual requests are classified to three categories: high priority requests, general requests, and special purpose requests (e.g., dosimetry, standards). The HPRL is hosted by the NEA in the form of a relational database publicly available on the web. This paper provides an overview of HPRL entries, status and outlook. Examples of requests successfully completed are given and new requests are described with emphasis on updated nuclear data needs in the fields of nuclear energy, neutron standards and dosimetry.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Iterative Bayesian Monte Carlo for nuclear data evaluation
Authors:
E. Alhassan,
D. Rochman,
A. Vasiliev,
M. Wohlmuther,
M. Hursin,
A. J. Koning,
H. Ferroukhi
Abstract:
In this work, we explore the use of an iterative Bayesian Monte Carlo (IBM) procedure for nuclear data evaluation within a Talys Evaluated Nuclear data Library (TENDL) framework. In order to identify the model and parameter combinations that reproduce selected experimental data, different physical models implemented within the TALYS code, were sampled and varied simultaneously to produce random in…
▽ More
In this work, we explore the use of an iterative Bayesian Monte Carlo (IBM) procedure for nuclear data evaluation within a Talys Evaluated Nuclear data Library (TENDL) framework. In order to identify the model and parameter combinations that reproduce selected experimental data, different physical models implemented within the TALYS code, were sampled and varied simultaneously to produce random input files with unique model combinations. All the models considered were assumed to be equal a priori. Parameters to these models were then varied simultaneously using the TALYS code system to produce a set of random ENDF files which were processed into x-y tables for comparison with selected experimental data from the EXFOR database within a Bayesian framework. To improve our fit to experimental data, we iteratively update our 'best' file - the file that maximises the likelihood function - by re-sampling model parameters around this file. The method proposed has been applied for the evaluation of p+Cd-111 and Co-59 between 1 - 100 MeV incident energy region. Finally, the adjusted files were compared with experimental data from the EXFOR database as well as with evaluations from the TENDL-2017 and JENDL-4.0/HE nuclear data libraries.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
In search of the best nuclear data file for proton induced reactions: varying both models and their parameters
Authors:
E. Alhassan,
D. Rochman,
A. Vasiliev,
R. M. Bergmann,
M. Wohlmuther,
A. J. Koning,
H. Ferroukhi
Abstract:
A lot of research work has been carried out in fine tuning model parameters to reproduce experimental data for neutron induced reactions. This however is not the case for proton induced reactions where large deviations still exist between model calculations and experiments for some cross sections. In this work, we present a method for searching both the model and model parameter space in order to…
▽ More
A lot of research work has been carried out in fine tuning model parameters to reproduce experimental data for neutron induced reactions. This however is not the case for proton induced reactions where large deviations still exist between model calculations and experiments for some cross sections. In this work, we present a method for searching both the model and model parameter space in order to identify the 'best' nuclear reaction models with their parameter sets that reproduces carefully selected experimental data. Three sets of experimental data from EXFOR are used in this work: (1) cross sections of the target nucleus (2) cross sections of the residual nuclei and (3) angular distributions. Selected models and their parameters were varied simultaneously to produce a large set of random nuclear data files. The goodness of fit between our adjustments and experimental data was achieved by computing a global reduced chi square which took into consideration the above listed experimental data. The method has been applied for the adjustment of proton induced reactions on Co-59 between 1 to 100 MeV. The adjusted files obtained are compared with available experimental data and evaluations from other nuclear data libraries.
△ Less
Submitted 24 December, 2019;
originally announced December 2019.
-
$γ$-ray Strength Function for Barium Isotopes
Authors:
H. Utsunomiya,
T. Renstrøm,
G. M. Tveten,
S. Goriely,
T. Ari-izumi,
V. W. Ingeberg,
B. V. Kheswa,
Y. -W. Lui,
S. Miyamoto,
S. Hilaire,
S. Péru,
A. J. Koning
Abstract:
Photoneutron cross sections were measured for $^{137}$Ba and $^{138}$Ba at energies below two-neutron threshold using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. The photoneutron data are used to constrain the $γ$-ray strength function on the basis of the Hartree-Fock-Bogolyubov plus quasi-particle random phase approximati…
▽ More
Photoneutron cross sections were measured for $^{137}$Ba and $^{138}$Ba at energies below two-neutron threshold using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. The photoneutron data are used to constrain the $γ$-ray strength function on the basis of the Hartree-Fock-Bogolyubov plus quasi-particle random phase approximation using the Gogny D1M interaction. Supplementing the experimentally constrained $γ$-ray strength function with the zero-limit E1 and M1 contributions which are unique to the deexcitation mode, we discuss radiative neutron capture cross sections relevant to the s-process nucleosynthesis of barium isotopes in the vicinity of the neutron magic number 82.
△ Less
Submitted 26 August, 2019; v1 submitted 14 June, 2019;
originally announced June 2019.
-
Bayesian updating for data adjustments and multi-level uncertainty propagation within Total Monte Carlo
Authors:
E. Alhassan,
D. Rochman,
H. Sjöstrand,
A. Vasiliev,
A. J. Koning,
H. Ferroukhi
Abstract:
In this work, a method is proposed for combining differential and integral benchmark experimental data within a Bayesian framework for nuclear data adjustments and multi-level uncertainty propagation using the Total Monte Carlo method. First, input parameters to basic nuclear physics models implemented within the state of the art nuclear reactions code, TALYS, were sampled from uniform distributio…
▽ More
In this work, a method is proposed for combining differential and integral benchmark experimental data within a Bayesian framework for nuclear data adjustments and multi-level uncertainty propagation using the Total Monte Carlo method. First, input parameters to basic nuclear physics models implemented within the state of the art nuclear reactions code, TALYS, were sampled from uniform distributions and randomly varied to produce a large set of random nuclear data files. Next, a probabilistic data assimilation was carried out by computing the likelihood function for each random nuclear data file based first on only differential experimental data (1st update) and then on integral benchmark data (2nd update). The individual likelihood functions from the two updates were then combined into a global likelihood function which was used for the selection of the final 'best' file. The proposed method has been applied for the adjustment of $^{208}$Pb in the fast neutron energy region below 20 MeV. The 'best' file from the adjustments was compared with available experimental data from the EXFOR database as well as evaluations from the major nuclear data libraries and found to compare favourably.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
The $γ$-ray strength function for Thallium isotopes relevant to the $^{205}$Pb - $^{205}$Tl chronometry
Authors:
H. Utsunomiya,
T. Renstrøm,
G. M. Tveten,
S. Goriely,
T. Ari-izumi,
D. Filipescu,
J. Kaur,
Y. -W. Lui,
W. Luo,
S. Miyamoto,
A. C. Larsen,
S. Hilaire,
S. Péru,
A. J. Koning
Abstract:
Photoneutron cross sections were measured for $^{203}$Tl and $^{205}$Tl at energies between the one- and two-neutron thresholds using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. Our new measurement results in cross sections significantly different from the previously reported bremsstrahlung experiment, leading to rather di…
▽ More
Photoneutron cross sections were measured for $^{203}$Tl and $^{205}$Tl at energies between the one- and two-neutron thresholds using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. Our new measurement results in cross sections significantly different from the previously reported bremsstrahlung experiment, leading to rather different GDR parameters, in particular to lower GDR peak energies and higher peak cross sections. The photoneutron data are used to constrain the $γ$-ray strength function on the basis of the Hartree-Fock-Bogolyubov plus quasi-particle random phase approximation using the Gogny D1M interaction. Supplementing the experimentally constrained $γ$-ray strength function with the zero-limit E1 and M1 contributions for the de-excitation mode, we estimate the Maxwellian-averaged cross section for the s-process branching-point nucleus $^{204}$Tl in the context of the $^{205}$Pb - $^{205}$Tl chronometry.
△ Less
Submitted 1 November, 2018;
originally announced November 2018.
-
Photoneutron cross sections for Ni isotopes: Toward understanding $(n,γ)$ cross sections relevant to the weak s-process nucleosynthesis
Authors:
H. Utsunomiya,
T. Renstrøm,
G. M. Tveten,
S. Goriely,
S. Katayama,
T. Ari-izumi,
D. Takenaka,
D. Symochko,
B. V. Kheswa,
V. W. Ingeberg,
T. Glodariu,
Y. -W. Lui,
S. Miyamoto,
A. C. Larsen,
J. E. Midtbø,
A. Görgen,
S. Siem,
L. Crespo Campo,
M. Guttormsen,
S. Hilaire,
S. Péru,
A. J. Koning
Abstract:
Photoneutron cross sections were measured for $^{58}$Ni, $^{60}$Ni, $^{61}$Ni, and $^{64}$Ni at energies between the one-neutron and two-neutron thresholds using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. The new photoneutron data are used to extract the $γ$-ray strength function above the neutron threshold complementing…
▽ More
Photoneutron cross sections were measured for $^{58}$Ni, $^{60}$Ni, $^{61}$Ni, and $^{64}$Ni at energies between the one-neutron and two-neutron thresholds using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. The new photoneutron data are used to extract the $γ$-ray strength function above the neutron threshold complementing the information obtained by the Oslo method below the threshold. We discuss radiative neutron capture cross sections and the Maxwellian-averaged cross sections for Ni isotopes including $^{63}$Ni, a branching point nucleus along the weak s-process path. The cross sections are calculated with the experimentally constrained $γ$-ray strength functions from the Hartree-Fock-Bogolyubov plus quasi-particle-random phase approximation based on the Gogny D1M interaction for both $E1$ and $M1$ components and supplemented with the $M1$ upbend.
△ Less
Submitted 7 October, 2018; v1 submitted 23 April, 2018;
originally announced April 2018.
-
Chromosphere to 1 AU Simulation of the 2011 March 7th Event: A Comprehensive Study of Coronal Mass Ejection Propagation
Authors:
M. **,
W. B. Manchester,
B. van der Holst,
I. Sokolov,
G. Toth,
A. Vourlidas,
C. A. de Koning,
T. I. Gombosi
Abstract:
We perform and analyze results of a global magnetohydrodyanmic (MHD) simulation of the fast coronal mass ejection (CME) that occurred on 2011 March 7. The simulation is made using the newly developed Alfvén Wave Solar Model (AWSoM), which describes the background solar wind starting from the upper chromosphere and extends to 24 R$_{\odot}$. Coupling AWSoM to an inner heliosphere (IH) model with th…
▽ More
We perform and analyze results of a global magnetohydrodyanmic (MHD) simulation of the fast coronal mass ejection (CME) that occurred on 2011 March 7. The simulation is made using the newly developed Alfvén Wave Solar Model (AWSoM), which describes the background solar wind starting from the upper chromosphere and extends to 24 R$_{\odot}$. Coupling AWSoM to an inner heliosphere (IH) model with the Space Weather Modeling Framework (SWMF) extends the total domain beyond the orbit of Earth. Physical processes included in the model are multi-species thermodynamics, electron heat conduction (both collisional and collisionless formulations), optically thin radiative cooling, and Alfvén-wave turbulence that accelerates and heats the solar wind. The Alfvén-wave description is physically self-consistent, including non-Wentzel-Kramers-Brillouin (WKB) reflection and physics-based apportioning of turbulent dissipative heating to both electrons and protons. Within this model, we initiate the CME by using the Gibson-Low (GL) analytical flux rope model and follow its evolution for days, in which time it propagates beyond STEREO A. A detailed comparison study is performed using remote as well as \textit{in situ} observations. Although the flux rope structure is not compared directly due to lack of relevant ejecta observation at 1 AU in this event, our results show that the new model can reproduce many of the observed features near the Sun (e.g., CME-driven extreme ultraviolet (EUV) waves, deflection of the flux rope from the coronal hole, "double-front" in the white light images) and in the heliosphere (e.g., shock propagation direction, shock properties at STEREO A).
△ Less
Submitted 27 November, 2016;
originally announced November 2016.
-
First performance of the gems + gmos system. Part1. Imaging
Authors:
Pascale Hibon,
Vincent Garrel,
Benoit Neichel,
Benjamin Prout,
Francois Rigaut,
Alice Koning,
Eleazar R. Carrasco,
German Gimeno,
Peter Pessev
Abstract:
During the commissioning of the Gemini MCAO System (GeMS), we had the opportunity to obtain data with the Gemini Multi-Object Spectrograph (GMOS), the most utilised instrument at Gemini South Observatory, in March and May 2012. Several globular clusters were observed in imaging mode that allowed us to study the performance of this new and untested combination. GMOS is a visible instrument, hence p…
▽ More
During the commissioning of the Gemini MCAO System (GeMS), we had the opportunity to obtain data with the Gemini Multi-Object Spectrograph (GMOS), the most utilised instrument at Gemini South Observatory, in March and May 2012. Several globular clusters were observed in imaging mode that allowed us to study the performance of this new and untested combination. GMOS is a visible instrument, hence pushing MCAO toward the visible.We report here on the results with the GMOS instruments, derive photometric performance in term of Full Width Half Maximum (FWHM) and throughput. In most of the cases, we obtained an improvement factor of at least 2 against the natural seeing. This result also depends on the Natural Guide Star constellation selected for the observations and we then study the impact of the guide star selection on the FWHM performance.We also derive a first astrometric analysis showing that the GeMS+GMOS system provide an absolute astrometric precision better than 8mas and a relative astrometric precision lower than 50 mas.
△ Less
Submitted 12 April, 2016;
originally announced April 2016.
-
The elapsed time between two transient state observations for an absorbing Markov chain
Authors:
Bianca De Sanctis,
A. P. Jason de Koning
Abstract:
Consider a system evolving according to an absorbing discrete-time Markov chain with known transition matrix. The state of the system is observed at two points in time, separated by an unknown number of generations. We are interested in calculating the expected elapsed time and its variance. We provide a novel, exact solution, which is computable from the fundamental matrix of a related absorbing…
▽ More
Consider a system evolving according to an absorbing discrete-time Markov chain with known transition matrix. The state of the system is observed at two points in time, separated by an unknown number of generations. We are interested in calculating the expected elapsed time and its variance. We provide a novel, exact solution, which is computable from the fundamental matrix of a related absorbing Markov chain. This solution may be useful in population genetics for computing the expected age of a segregating allele without requiring diffusion approximation.
△ Less
Submitted 3 November, 2015;
originally announced November 2015.
-
Light-ion production in the interaction of 175 MeV quasi-mono-energetic neutrons with iron and with bismuth
Authors:
R. Bevilacqua,
K. Jansson,
S. Pomp,
P. Andersson,
J. Blomgren,
C. Gustavsson,
A. Hjalmarsson,
V. D. Simutkin,
M. Österlund,
A. J. Koning,
A. V. Prokofiev,
M. Hayashi,
S. Hirayama,
Y. Naitou,
Y. Watanabe,
U. Tippawan,
S. G. Mashnik,
L. M. Kerby,
F. -R. Lecolley,
N. Marie,
J. -C. David,
S. Leray
Abstract:
Nuclear data for neutron-induced reactions in the intermediate energy range of 20 to 200 MeV are of great importance for the development of nuclear reaction codes since little data exist in that range. Also several different applications benefit from such data, notably accelerator-driven incineration of nuclear waste. The Medley setup was used for a series of measurements of p, d, t, $^3$He and…
▽ More
Nuclear data for neutron-induced reactions in the intermediate energy range of 20 to 200 MeV are of great importance for the development of nuclear reaction codes since little data exist in that range. Also several different applications benefit from such data, notably accelerator-driven incineration of nuclear waste. The Medley setup was used for a series of measurements of p, d, t, $^3$He and $α$-particle production by 175 MeV quasi-mono-energetic neutrons on various target nuclei. The measurements were performed at the The Svedberg Laboratory in Uppsala, Sweden. Eight detector telescopes placed at angles between 20$^\circ$ and 160$^\circ$ were used. Medley uses the $ΔE$-$ΔE$-$E$ technique to discriminate among the particle types and is able to measure double-differential cross sections over a wide range of particle energies. This paper briefly describes the experimental setup, summarizes the data analysis and reports on recent changes in the previously reported preliminary data set on bismuth. Experimental data are compared with INCL4.5-Abla07, MCNP6 using CEM03.03, TALYS and PHITS model calculations as well as with nuclear data evaluations. The models agree fairly well overall but in some cases systematic differences are found.
△ Less
Submitted 12 November, 2014;
originally announced November 2014.
-
EASY-II: a system for modelling of n, d, p, γ and α activation and transmutation processes
Authors:
Jean-Christophe Sublet,
James Eastwood,
Guy Morgan,
Arjan Koning,
Dimitri Rochman
Abstract:
EASY-II is designed as a functional replacement for the previous European Activation System, EASY-2010. It has extended nuclear data and new software, FISPACT-II, written in object-style Fortran to provide new capabilities for predictions of activation, transmutation, depletion and burnup. The new FISPACT-II code has allowed us to implement many more features in terms of energy range, up to GeV; i…
▽ More
EASY-II is designed as a functional replacement for the previous European Activation System, EASY-2010. It has extended nuclear data and new software, FISPACT-II, written in object-style Fortran to provide new capabilities for predictions of activation, transmutation, depletion and burnup. The new FISPACT-II code has allowed us to implement many more features in terms of energy range, up to GeV; incident particles: alpha, gamma, proton, deuteron and neutron; and neutron physics: self-shielding effects, temperature dependence, pathways analysis, sensitivity and error estimation using covariance data. These capabilities cover most application needs: nuclear fission and fusion, accelerator physics, isotope production, waste management and many more. In parallel, the maturity of modern general-purpose libraries such as TENDL-2012 encompassing thousands of target nuclides, the evolution of the ENDF format and the capabilities of the latest generation of processing codes PREPRO-2012, NJOY2012 and CALENDF-2010 have allowed the FISPACT-II code to be fed with more robust, complete and appropriate data: cross-sections with covariance, probability tables in the resonance ranges, kerma, dpa, gas and radionuclide production and 24 decay types. All such data for the five most important incident particles are placed in evaluated data files up to an incident energy of 200 MeV. The resulting code and data system, EASY-II, includes many new features and enhancements. It has been extensively tested, and also benefits from the feedback from wide-ranging validation and verification activities performed with its predecessor.
△ Less
Submitted 27 September, 2013;
originally announced September 2013.
-
Propagation of nuclear data uncertainties for ELECTRA burn-up calculations
Authors:
H. Sjöstrand,
E. Alhassan,
J. Duan,
C. Gustavsson,
A. Koning,
S. Pomp,
D. Rochman,
M. Österlund
Abstract:
The European Lead-Cooled Training Reactor (ELECTRA) has been proposed as a training reactor for fast systems within the Swedish nuclear program. It is a low-power fast reactor cooled by pure liquid lead. In this work, we propagate the uncertainties in Pu-239 transport data to uncertainties in the fuel inventory of ELECTRA during the reactor life using the Total Monte Carlo approach (TMC). Within t…
▽ More
The European Lead-Cooled Training Reactor (ELECTRA) has been proposed as a training reactor for fast systems within the Swedish nuclear program. It is a low-power fast reactor cooled by pure liquid lead. In this work, we propagate the uncertainties in Pu-239 transport data to uncertainties in the fuel inventory of ELECTRA during the reactor life using the Total Monte Carlo approach (TMC). Within the TENDL project the nuclear models input parameters were randomized within their uncertainties and 740 Pu-239 nuclear data libraries were generated. These libraries are used as inputs to reactor codes, in our case SERPENT, to perform uncertainty analysis of nuclear reactor inventory during burn-up. The uncertainty in the inventory determines uncertainties in: the long-term radio-toxicity, the decay heat, the evolution of reactivity parameters, gas pressure and volatile fission product content. In this work, a methodology called fast TMC is utilized, which reduces the overall calculation time. The uncertainty in the long-term radiotoxicity, decay heat, gas pressure and volatile fission products were found to be insignificant. However, the uncertainty of some minor actinides were observed to be rather large and therefore their impact on multiple recycling should be investigated further. It was also found that, criticality benchmarks can be used to reduce inventory uncertainties due to nuclear data. Further studies are needed to include fission yield uncertainties, more isotopes, and a larger set of benchmarks.
△ Less
Submitted 8 April, 2013; v1 submitted 5 April, 2013;
originally announced April 2013.
-
The 'nanobig rods' class of gold nanorods: optimized dimensions for improved in vivo therapeutic and imaging efficacy
Authors:
Constantin Ungureanu,
Gerben A. Koning,
Ton G. van Leeuwen,
Srirang Manohar
Abstract:
Currently, gold nanorods can be synthesized in a wide range of sizes. However, for intended biological applications gold nanorods with approximate dimensions 50 nm x 15 nm are used. We investigate by computer simulation the effect of particle dimensions on the optical and thermal properties in the context of the specific applications of photoacoustic imaging. In addition we discuss the influence o…
▽ More
Currently, gold nanorods can be synthesized in a wide range of sizes. However, for intended biological applications gold nanorods with approximate dimensions 50 nm x 15 nm are used. We investigate by computer simulation the effect of particle dimensions on the optical and thermal properties in the context of the specific applications of photoacoustic imaging. In addition we discuss the influence of particle size in overcoming the following biophysical barriers when administrated in vivo: extravasation, avoidance of uptake by organs of the reticuloendothelial system, penetration through the interstitium, binding capability and uptake by the target cells. Although more complex biological influences can be introduced in future analysis, the present work illustrates that larger gold nanorods, designated by us as "nanobig rods", may perform relatively better at meeting the requirements for successful in vivo applications compared to their smaller counterparts which are conventionally used.
△ Less
Submitted 3 April, 2013; v1 submitted 29 March, 2013;
originally announced March 2013.
-
Combining Total Monte Carlo and Benchmarks for nuclear data uncertainty propagation on an LFRs safety parameters
Authors:
Erwin Alhassan,
Henrik Sjöstrand,
Junfeng Duan,
Cecilia Gustavsson,
Arjan Koning,
Stephan Pomp,
Dimitri Rochman,
Michael Österlund
Abstract:
Analyses are carried out to assess the impact of nuclear data uncertainties on keff for the European Lead Cooled Training Reactor (ELECTRA) using the Total Monte Carlo method. A large number of Pu-239 random ENDF-formated libraries generated using the TALYS based system were processed into ACE format with NJOY99.336 code and used as input into the Serpent Monte Carlo neutron transport code to obta…
▽ More
Analyses are carried out to assess the impact of nuclear data uncertainties on keff for the European Lead Cooled Training Reactor (ELECTRA) using the Total Monte Carlo method. A large number of Pu-239 random ENDF-formated libraries generated using the TALYS based system were processed into ACE format with NJOY99.336 code and used as input into the Serpent Monte Carlo neutron transport code to obtain distribution in keff. The keff distribution obtained was compared with the latest major nuclear data libraries - JEFF-3.1.2, ENDF/B-VII.1 and JENDL-4.0. A method is proposed for the selection of benchmarks for specific applications using the Total Monte Carlo approach. Finally, an accept/reject criterion was investigated based on chi square values obtained using the Pu-239 Jezebel criticality benchmark. It was observed that nuclear data uncertainties in keff were reduced considerably from 748 to 443 pcm by applying a more rigid acceptance criteria for accepting random files.
△ Less
Submitted 4 April, 2013; v1 submitted 26 March, 2013;
originally announced March 2013.
-
Uncertainty study of nuclear model parameters for the n+ ^{56}Fe reactions in the fast neutron region below 20 MeV
Authors:
Junfeng Duan,
Stephan Pomp,
Henrik Sjöstrand,
Erwin Alhassan,
Cecilia Gustavsson,
Michael Österlund,
Arjan Koning,
Dimitri Rochman
Abstract:
In this work, we study the uncertainty of nuclear model parameters for neutron induced ^{56}Fe reactions in fast neutron region by using the Total Monte Carlo method. We perform a large number of TALYS runs and compare the calculated results with the experimental data of the cross sections to obtain the uncertainties of the model parameters. Based on the derived uncertainties another 1000 TALYS ru…
▽ More
In this work, we study the uncertainty of nuclear model parameters for neutron induced ^{56}Fe reactions in fast neutron region by using the Total Monte Carlo method. We perform a large number of TALYS runs and compare the calculated results with the experimental data of the cross sections to obtain the uncertainties of the model parameters. Based on the derived uncertainties another 1000 TALYS runs have been performed to create random cross section files. For comparison with the experimental data we calculate a weighted χ^2 value for each random file as well as the ENDF/B-VII.1, JEFF3.1, JENDL4.0 and CENDL3.1 data libraries. Furthermore, we investigate the optical model parameters correlation obtained by way of this procedure.
△ Less
Submitted 25 March, 2013;
originally announced March 2013.
-
The debris disk around gamma Doradus resolved with Herschel
Authors:
Hannah Broekhoven-Fiene,
Brenda C. Matthews,
Grant M. Kennedy,
Mark Booth,
Bruce Sibthorpe,
Samantha M. Lawler,
J. J. Kavelaars,
Mark C. Wyatt,
Chenruo Qi,
Alice Koning,
Kate Y. L. Su,
George H. Rieke,
David J. Wilner,
Jane S. Greaves
Abstract:
We present observations of the debris disk around gamma Doradus, an F1V star, from the Herschel Key Programme DEBRIS (Disc Emission via Bias-free Reconnaissance in the Infrared/Submillimetre). The disk is well-resolved at 70, 100 and 160 micron, resolved along its major axis at 250 micron, detected but not resolved at 350 micron, and confused with a background source at 500 micron. It is one of ou…
▽ More
We present observations of the debris disk around gamma Doradus, an F1V star, from the Herschel Key Programme DEBRIS (Disc Emission via Bias-free Reconnaissance in the Infrared/Submillimetre). The disk is well-resolved at 70, 100 and 160 micron, resolved along its major axis at 250 micron, detected but not resolved at 350 micron, and confused with a background source at 500 micron. It is one of our best resolved targets and we find it to have a radially broad dust distribution. The modelling of the resolved images cannot distinguish between two configurations: an arrangement of a warm inner ring at several AU (best-fit 4 AU) and a cool outer belt extending from ~55 to 400 AU or an arrangement of two cool, narrow rings at ~70 AU and ~190 AU. This suggests that any configuration between these two is also possible. Both models have a total fractional luminosity of ~10^{-5} and are consistent with the disk being aligned with the stellar equator. The inner edge of either possible configuration suggests that the most likely region to find planets in this system would be within ~55 AU of the star. A transient event is not needed to explain the warm dust's fractional luminosity.
△ Less
Submitted 6 December, 2012;
originally announced December 2012.
-
Resolved Debris Discs Around A Stars in the Herschel DEBRIS Survey
Authors:
Mark Booth,
Grant Kennedy,
Bruce Sibthorpe,
Brenda C. Matthews,
Mark C. Wyatt,
Gaspard Duchêne,
J. J. Kavelaars,
David Rodriguez,
Jane S. Greaves,
Alice Koning,
Laura Vican,
George H. Rieke,
Kate Y. L. Su,
Amaya Moro-Martín,
Paul Kalas
Abstract:
The majority of debris discs discovered so far have only been detected through infrared excess emission above stellar photospheres. While disc properties can be inferred from unresolved photometry alone under various assumptions for the physical properties of dust grains, there is a degeneracy between disc radius and dust temperature that depends on the grain size distribution and optical properti…
▽ More
The majority of debris discs discovered so far have only been detected through infrared excess emission above stellar photospheres. While disc properties can be inferred from unresolved photometry alone under various assumptions for the physical properties of dust grains, there is a degeneracy between disc radius and dust temperature that depends on the grain size distribution and optical properties. By resolving the disc we can measure the actual location of the dust. The launch of Herschel, with an angular resolution superior to previous far-infrared telescopes, allows us to spatially resolve more discs and locate the dust directly. Here we present the nine resolved discs around A stars between 20 and 40 pc observed by the DEBRIS survey. We use these data to investigate the disc radii by fitting narrow ring models to images at 70, 100 and 160 μm and by fitting blackbodies to full spectral energy distributions. We do this with the aim of finding an improved way of estimating disc radii for unresolved systems. The ratio between the resolved and blackbody radii varies between 1 and 2.5. This ratio is inversely correlated with luminosity and any remaining discrepancies are most likely explained by differences to the minimum size of grain in the size distribution or differences in composition. We find that three of the systems are well fit by a narrow ring, two systems are borderline cases and the other four likely require wider or multiple rings to fully explain the observations, reflecting the diversity of planetary systems.
△ Less
Submitted 1 October, 2012;
originally announced October 2012.
-
Multi-point shock and flux rope analysis of multiple interplanetary coronal mass ejections around 2010 August 1 in the inner heliosphere
Authors:
C. Möstl,
C. J. Farrugia,
E. K. J. Kilpua,
L. K. Jian,
Y. Liu,
J. Eastwood,
R. A. Harrison,
D. F. Webb,
M. Temmer,
D. Odstrcil,
J. A. Davies,
T. Rollett,
J. G. Luhmann,
N. Nitta,
T. Mulligan,
E. A. Jensen,
R. Forsyth,
B. Lavraud,
C. A. De Koning,
A. M. Veronig,
A. B. Galvin,
T. L. Zhang,
B. J. Anderson
Abstract:
We present multi-point in situ observations of a complex sequence of coronal mass ejections (CMEs) which may serve as a benchmark event for numerical and empirical space weather prediction models. On 2010 August 1, instruments on various space missions (Solar Dynamics Observatory/ Solar and Heliospheric Observatory/Solar-TErrestrial-RElations-Observatory) monitored several CMEs originating within…
▽ More
We present multi-point in situ observations of a complex sequence of coronal mass ejections (CMEs) which may serve as a benchmark event for numerical and empirical space weather prediction models. On 2010 August 1, instruments on various space missions (Solar Dynamics Observatory/ Solar and Heliospheric Observatory/Solar-TErrestrial-RElations-Observatory) monitored several CMEs originating within tens of degrees from solar disk center. We compare their imprints on four widely separated locations, spanning 120 degree in heliospheric longitude, with radial distances from the Sun ranging from MESSENGER (0.38 AU) to Venus Express (VEX, at 0.72 AU) to Wind, ACE and ARTEMIS near Earth, and STEREO-B close to 1 AU. Calculating shock and flux rope parameters at each location points to a non-spherical shape of the shock, and shows the global configuration of the interplanetary coronal mass ejections (ICMEs), which have interacted, but do not seem to have merged. VEX and STEREO-B observed similar magnetic flux ropes (MFRs), in contrast to structures at Wind. The geomagnetic storm was intense, reaching two minima in the Dst index (~ -100 nT), caused by the sheath region behind the shock and one of two observed MFRs. MESSENGER received a glancing blow of the ICMEs, and the events missed STEREO-A entirely. The observations demonstrate how sympathetic solar eruptions may immerse at least 1/3 of the heliosphere in the ecliptic with their distinct plasma and magnetic field signatures. We also emphasize the difficulties in linking the local views derived from single-spacecraft observations to a consistent global picture, pointing to possible alterations from the classical picture of ICMEs.
△ Less
Submitted 13 September, 2012;
originally announced September 2012.
-
Characteristics of kinematics of a coronal mass ejection during the 2010 August 1 CME-CME interaction event
Authors:
Manuela Temmer,
Bojan Vrsnak,
Tanja Rollett,
Bianca Bein,
Curt A. de Koning,
Ying Liu,
Eckhard Bosman,
Jackie A. Davies,
Christian Möstl,
Tomislav Zic,
Astrid M. Veronig,
Volker Bothmer,
Richard Harrison,
Nariaki Nitta,
Mario Bisi,
Olga Flor,
Jonathan Eastwood,
Dusan Odstrcil,
Robert Forsyth
Abstract:
We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in…
▽ More
We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in the HI1 field-of-view. The full de-projected kinematics of the faster CME from Sun to Earth is derived by combining remote observations with in situ measurements of the CME at 1 AU. The speed profile of the faster CME (CME2; ~1200 km/s) shows a strong deceleration over the distance range at which it reaches the slower, preceding CME (CME1; ~700 km/s). By applying a drag-based model we are able to reproduce the kinematical profile of CME2 suggesting that CME1 represents a magnetohydrodynamic obstacle for CME2 and that, after the interaction, the merged entity propagates as a single structure in an ambient flow of speed and density typical for quiet solar wind conditions. Observational facts show that magnetic forces may contribute to the enhanced deceleration of CME2. We speculate that the increase in magnetic tension and pressure, when CME2 bends and compresses the magnetic field lines of CME1, increases the efficiency of drag.
△ Less
Submitted 3 February, 2012;
originally announced February 2012.
-
Does deuteron-induced fission on actinide nuclei prevails over the breakup at low incident energies?
Authors:
M. Avrigeanu,
V. Avrigeanu,
A. J. Koning
Abstract:
An analysis of the $^{231}$Pa$(d,3n)$$^{230}$U reaction excitation function at energies around the Coulomb barrier has taken into account the pre-equilibrium and compound-nucleus cross sections corrected for the deuteron-breakup decrease of the total reaction cross section, as well as the inelastic breakup enhancement. The analysis reveals the dominance of the deuteron breakup mechanism unlike a f…
▽ More
An analysis of the $^{231}$Pa$(d,3n)$$^{230}$U reaction excitation function at energies around the Coulomb barrier has taken into account the pre-equilibrium and compound-nucleus cross sections corrected for the deuteron-breakup decrease of the total reaction cross section, as well as the inelastic breakup enhancement. The analysis reveals the dominance of the deuteron breakup mechanism unlike a former assessment in this respect of the deuteron-induced fission process.
△ Less
Submitted 8 December, 2011;
originally announced December 2011.
-
Low and medium energy deuteron-ind ced reactions on $^{63,65}$Cu nuclei
Authors:
E. Simeckova,
P. Bém,
M. Honusek,
M. Stefánik,
U. Fischer,
S. P. Simakov,
R. A. Forrest,
A. J. Koning,
J. -C. Sublet,
M. Avrigeanu,
F. L. Roman,
V. Avrigeanu
Abstract:
The activation cross sections of (d,p), (d,2n), (d,3n), and (d,2p) reactions on 63,65Cu were measured in the energy range from 4 to 20 MeV using the stacked-foils technique. Then, following the available elastic-scattering data analysis that provided the optical potential for reaction cross sections calculations, an increased effort has been devoted to the breakup mechanism, the direct reaction st…
▽ More
The activation cross sections of (d,p), (d,2n), (d,3n), and (d,2p) reactions on 63,65Cu were measured in the energy range from 4 to 20 MeV using the stacked-foils technique. Then, following the available elastic-scattering data analysis that provided the optical potential for reaction cross sections calculations, an increased effort has been devoted to the breakup mechanism, the direct reaction strip**, and the pre-equilibrium and compound-nucleus cross section calculations, corrected for the breakup and strip** decrease of the total reaction cross section. The overall agreement between the measured and calculated deuteron activation cross sections proves the correctness of the nuclear mechanisms account, next to the simultaneous analysis of the elastic-scattering and reaction data.
△ Less
Submitted 24 June, 2011;
originally announced June 2011.
-
Light-ion production in the interaction of 96 MeV neutrons with carbon
Authors:
U. Tippawan,
S. Pomp,
J. Blomgren,
S. Dangtip,
C. Gustavsson,
J. Klug,
P. Nadel-Turonski,
L. Nilsson,
M. Österlund,
N. Olsson,
O. Jonsson,
A. V. Prokofiev,
P. -U. Renberg,
V. Corcalciuc,
Y. Watanabe,
A. J. Koning
Abstract:
Double-differential cross sections for light-ion (p, d, t, 3He and alpha) production in carbon induced by 96 MeV neutrons have been measured at eight laboratory angles from 20 degrees to 160 degrees in steps of 20 degrees. Experimental techniques are presented as well as procedures for data taking and data reduction. Deduced energy-differential, angle-differential and production cross sections a…
▽ More
Double-differential cross sections for light-ion (p, d, t, 3He and alpha) production in carbon induced by 96 MeV neutrons have been measured at eight laboratory angles from 20 degrees to 160 degrees in steps of 20 degrees. Experimental techniques are presented as well as procedures for data taking and data reduction. Deduced energy-differential, angle-differential and production cross sections are reported. Experimental cross sections are compared with theoretical reaction model calculations and experimental data in the literature. The measured particle data show marked discrepancies from the results of the model calculations in spectral shape and magnitude. The measured production cross sections for protons, deuterons, tritons, 3He, and alpha particles support the trends suggested by data at lower energies.
△ Less
Submitted 3 December, 2008;
originally announced December 2008.
-
Improved predictions of nuclear reaction rates with the TALYS reaction code for astrophysical applications
Authors:
S. Goriely,
S. Hilaire,
A. J. Koning
Abstract:
Nuclear reaction rates of astrophysical applications are traditionally determined on the basis of Hauser-Feshbach reaction codes. These codes adopt a number of approximations that have never been tested, such as a simplified width fluctuation correction, the neglect of delayed or multiple-particle emission during the electromagnetic decay cascade, or the absence of the pre-equilibrium contributi…
▽ More
Nuclear reaction rates of astrophysical applications are traditionally determined on the basis of Hauser-Feshbach reaction codes. These codes adopt a number of approximations that have never been tested, such as a simplified width fluctuation correction, the neglect of delayed or multiple-particle emission during the electromagnetic decay cascade, or the absence of the pre-equilibrium contribution at increasing incident energies.
The reaction code TALYS has been recently updated to estimate the Maxwellian-averaged reaction rates that are of astrophysical relevance. These new developments enable the reaction rates to be calculated with increased accuracy and reliability and the approximations of previous codes to be investigated.
The TALYS predictions for the thermonuclear rates of relevance to astrophysics are detailed and compared with those derived by widely-used codes for the same nuclear ingredients. It is shown that TALYS predictions may differ significantly from those of previous codes, in particular for nuclei for which no or little nuclear data is available. The pre-equilibrium process is shown to influence the astrophysics rates of exotic neutron-rich nuclei significantly. For the first time, the Maxwellian-averaged (n,2n) reaction rate is calculated for all nuclei and its competition with the radiative capture rate is discussed.
The TALYS code provides a new tool to estimate all nuclear reaction rates of relevance to astrophysics with improved accuracy and reliability.
△ Less
Submitted 13 June, 2008;
originally announced June 2008.
-
Fast-neutron induced pre-equilibrium reactions on 55Mn and 63,65Cu at energies up to 40 MeV
Authors:
M. Avrigeanu,
S. V. Chuvaev,
A. A. Filatenkov,
R. A. Forrest,
M. Herman,
A. J. Koning,
A. J. M. Plompen,
F. L. Roman,
V. Avrigeanu
Abstract:
Excitation functions were measured for the $^{55}$Mn(n,2n)$^{54}$Mn, $^{55}$Mn(n,$α$)$^{52}$V, $^{63}$Cu(n,$α$)$^{60}$Co, $^{65}$Cu(n,2n)$^{64}$Cu, and $^{65}$Cu(n,p)$^{65}$Ni reactions from 13.47 to 14.83 MeV. The experimental cross sections are compared with the results of calculations including all activation channels for the stable isotopes of Mn and Cu, for neutron incident energies up to 5…
▽ More
Excitation functions were measured for the $^{55}$Mn(n,2n)$^{54}$Mn, $^{55}$Mn(n,$α$)$^{52}$V, $^{63}$Cu(n,$α$)$^{60}$Co, $^{65}$Cu(n,2n)$^{64}$Cu, and $^{65}$Cu(n,p)$^{65}$Ni reactions from 13.47 to 14.83 MeV. The experimental cross sections are compared with the results of calculations including all activation channels for the stable isotopes of Mn and Cu, for neutron incident energies up to 50 MeV. Within the energy range up to 20 MeV the model calculations are most sensitive to the parameters related to nuclei in the early stages of the reaction, while the model assumptions are better established by analysis of the data in the energy range 20-40 MeV. While the present analysis has taken advantage of both a new set of accurate measured cross sections around 14 MeV and the larger data basis fortunately available between 20 and 40 MeV for the Mn and Cu isotopes, the need of additional measurements below as well as above 40 MeV is pointed out. Keywords: 55Mn, 63,65Cu, E$\leq$40 MeV, Neutron activation cross section measurements, Nuclear reactions, Model calculations, Manganese, Copper
△ Less
Submitted 5 December, 2007;
originally announced December 2007.
-
Light-ion production in the interaction of 96 MeV neutrons with oxygen
Authors:
U. Tippawan,
S. Pomp,
A. Atac,
B. Bergenwall,
J. Blomgren,
S. Dangtip,
A. Hildebrand,
C. Johansson,
J. Klug,
P. Mermod,
L. Nilsson,
M. Osterlund,
N. Olsson,
A. V. Prokofiev,
P. Nadel-Turonski,
V. Corcalciuc,
A. Koning
Abstract:
Double-differential cross sections for light-ion (p, d, t, He-3 and alpha) production in oxygen, induced by 96 MeV neutrons are reported. Energy spectra are measured at eight laboratory angles from 20 degrees to 160 degrees in steps of 20 degrees. Procedures for data taking and data reduction are presented. Deduced energy-differential and production cross sections are reported. Experimental cros…
▽ More
Double-differential cross sections for light-ion (p, d, t, He-3 and alpha) production in oxygen, induced by 96 MeV neutrons are reported. Energy spectra are measured at eight laboratory angles from 20 degrees to 160 degrees in steps of 20 degrees. Procedures for data taking and data reduction are presented. Deduced energy-differential and production cross sections are reported. Experimental cross sections are compared to theoretical reaction model calculations and experimental data at lower neutron energies in the literature. The measured proton data agree reasonably well with the results of the model calculations, whereas the agreement for the other particles is less convincing. The measured production cross sections for protons, deuterons, tritons and alpha particles support the trends suggested by data at lower energies.
△ Less
Submitted 14 February, 2006; v1 submitted 18 January, 2005;
originally announced January 2005.
-
Photodisintegration of Ultra-High-Energy Cosmic Rays revisited
Authors:
E. Khan,
S. Goriely,
D. Allard,
E. Parizot,
T. Suomijarvi,
A. J. Koning,
S. Hilaire,
M. C. Duijvestijn
Abstract:
Recent microscopic and phenomenological calculations of giant dipole resonances for A <= 56 nuclei are presented. The derived photodisintegration cross sections are exhaustively compared to the photonuclear data available to date. An accurate description of the data is found. Our new calculations are also compared with the previous and widely-used estimates of Puget, Stecker and Bredekamp. The p…
▽ More
Recent microscopic and phenomenological calculations of giant dipole resonances for A <= 56 nuclei are presented. The derived photodisintegration cross sections are exhaustively compared to the photonuclear data available to date. An accurate description of the data is found. Our new calculations are also compared with the previous and widely-used estimates of Puget, Stecker and Bredekamp. The present calculations also include all the possible paths down the nuclear chart. The impact on the photodisintegration of ultra-high-energy cosmic rays (UHECR) is illustrated for a Fe source with typical energies of 10^{20-21} eV. At energies around 10^20 eV, the new cross sections are found to modify the UHECR photodisintegration rates. At energies around 10^21 eV, it is recommended to solve a full reaction network to estimate the photodisintegration rate of the UHECR.
△ Less
Submitted 4 December, 2004;
originally announced December 2004.
-
Light-ion production in the interaction of 96 MeV neutrons with silicon
Authors:
U. Tippawan,
S. Pomp,
A. Atac,
B. Bergenwall,
J. Blomgren,
S. Dangtip,
A. Hildebrand,
C. Johansson,
J. Klug,
P. Mermod,
L. Nilsson,
M. Osterlund,
N. Olsson,
K. Elmgren,
O. Jonsson,
A. V. Prokofiev,
P. -U. Renberg,
P. Nadel-Turonski,
V. Corcalciuc,
Y. Watanabe,
A. Koning
Abstract:
Double-differential cross sections for light-ion (p, d, t, He-3 and alpha) production in silicon, induced by 96 MeV neutrons are reported. Energy spectra are measured at eight laboratory angles, ranging from 20 degrees to 160 degrees in steps of 20 degrees. Procedures for data taking and data reduction are presented. Deduced energy-differential, angle-differential and production cross sections a…
▽ More
Double-differential cross sections for light-ion (p, d, t, He-3 and alpha) production in silicon, induced by 96 MeV neutrons are reported. Energy spectra are measured at eight laboratory angles, ranging from 20 degrees to 160 degrees in steps of 20 degrees. Procedures for data taking and data reduction are presented. Deduced energy-differential, angle-differential and production cross sections are reported. Experimental cross sections are compared to theoretical reaction model calculations and experimental data in the literature.
△ Less
Submitted 1 April, 2004; v1 submitted 16 January, 2004;
originally announced January 2004.