-
CLD -- A Detector Concept for the FCC-ee
Authors:
N. Bacchetta,
J. -J. Blaising,
E. Brondolin,
M. Dam,
D. Dannheim,
K. Elsener,
D. Hynds,
P. Janot,
A. M. Kolano,
E. Leogrande,
L. Linssen,
A. Nürnberg,
E. F. Perez,
M. Petrič,
P. Roloff,
A. Sailer,
N. Siegrist,
O. Viazlo,
G. G. Voutsinas,
M. A. Weber
Abstract:
This note gives a conceptual description and illustration of the CLD detector, based on the work for a detector at CLIC. CLD is one of the detectors envisaged at a future 100 km $e^+e^-$ circular collider (FCC-ee). The note also contains a brief description of the simulation and reconstruction tools used in the linear collider community, which have been adapted for physics and performance studies…
▽ More
This note gives a conceptual description and illustration of the CLD detector, based on the work for a detector at CLIC. CLD is one of the detectors envisaged at a future 100 km $e^+e^-$ circular collider (FCC-ee). The note also contains a brief description of the simulation and reconstruction tools used in the linear collider community, which have been adapted for physics and performance studies of CLD. The detector performance is described in terms of single particles, particles in jets, jet energy and angular resolution, and flavour tagging. The impact of beam-related backgrounds (incoherent $e^+e^-$ pairs and synchrotron radiation photons) on the performance is also discussed.
△ Less
Submitted 12 December, 2019; v1 submitted 27 November, 2019;
originally announced November 2019.
-
Machine detector interface for the $e^+e^-$ future circular collider
Authors:
Manuela Boscolo,
Oscar Blanco-Garcia,
Nicola Bacchetta,
Eleonora Belli,
Michael Benedikt,
Helmut Burkhardt,
Miguel Gil Costa,
Konrad Elsener,
Emilia Leogrande,
Patrick Janot,
Herman Ten Kate,
Dima El Khechen,
Anna Kolano,
Roberto Kersevan,
Marian Lueckof,
Katsunobu Oide,
Emmanuel Perez,
Nilou Teherani,
O. Viazlo,
Yorgos Voutsinas,
Frank Zimmermann,
Mogens Dam,
Alain Blondel,
M. Koratzinos,
Alexander Novokhatski
, et al. (5 additional authors not shown)
Abstract:
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision s…
▽ More
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision scheme has been chosen for the design and it will be compatible with all beam energies. In this paper we will describe the machine detector interface layout including the solenoid compensation scheme. We will describe how this layout fulfills all the requirements set by the parameters table and by the physical constraints. We will summarize the studies of the impact of the synchrotron radiation, the analysis of trapped modes and of the backgrounds induced by single beam and luminosity effects giving an estimate of the losses in the interaction region and in the detector.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
Intensity limits of the PSI Injector II cyclotron
Authors:
Anna Kolano,
Andreas Adelmann,
Roger Barlow,
Christian Baumgarten
Abstract:
We investigate limits on the current of the PSI Injector II high intensity separate-sector isochronous cyclotron, in its present configuration and after a proposed upgrade. Accelerator Driven Subcritical Reactors, neutron and neutrino experiments, and medical isotope production all benefit from increases in current, even at the ~ 10% level: the PSI cyclotrons provide relevant experience. As space…
▽ More
We investigate limits on the current of the PSI Injector II high intensity separate-sector isochronous cyclotron, in its present configuration and after a proposed upgrade. Accelerator Driven Subcritical Reactors, neutron and neutrino experiments, and medical isotope production all benefit from increases in current, even at the ~ 10% level: the PSI cyclotrons provide relevant experience. As space charge dominates at low beam energy, the injector is critical. Understanding space charge effects and halo formation through detailed numerical modelling gives clues on how to maximise the extracted current. Simulation of a space-charge dominated low energy high intensity (9.5 mA DC) machine, with a complex collimator set up in the central region sha** the bunch, is not trivial. We use the OPAL code, a tool for charged-particle optics calculations in large accelerator structures and beam lines, including 3D space charge. We have a precise model of the present production) Injector II, operating at 2.2 mA current. A simple model of the proposed future (upgraded) configuration of the cyclotron is also investigated.
We estimate intensity limits based on the developed models, supported by fitted scaling laws and measurements. We have been able to perform more detailed analysis of the bunch parameters and halo development than any previous study. Optimisation techniques enable better matching of the simulation set-up with Injector II parameters and measurements. We show that in the production configuration the beam current scales to the power of three with the beam size. However, at higher intensities, 4th power scaling is a better fit, setting the limit of approximately 3 mA. Currents of over 5 mA, higher than have been achieved to date, can be produced if the collimation scheme is adjusted.
△ Less
Submitted 25 July, 2017;
originally announced July 2017.
-
IsoDAR@KamLAND: A Conceptual Design Report for the Technical Facility
Authors:
M. Abs,
A. Adelmann,
J. R Alonso,
S. Axani,
W. A. Barletta,
R. Barlow,
L. Bartoszek,
A. Bungau,
L. Calabretta,
A. Calanna,
D. Campo,
G. Castro,
L. Celona,
G. H. Collin,
J. M. Conrad,
S. Gammino,
R. Johnson,
G. Karagiorgi,
S. Kayser,
W. Kleeven,
A. Kolano,
F. Labrecque,
W. A. Loinaz,
J. Minervini,
M. H. Moulai
, et al. (15 additional authors not shown)
Abstract:
This conceptual design report describes the technical facility for the IsoDAR electron-antineutrino source at KamLAND. The IsoDAR source will allow an impressive program of neutrino oscillation and electroweak physics to be performed at KamLAND. This report provides information on the physics case, the conceptual design for the subsystems, alternative designs considered, specifics of installation…
▽ More
This conceptual design report describes the technical facility for the IsoDAR electron-antineutrino source at KamLAND. The IsoDAR source will allow an impressive program of neutrino oscillation and electroweak physics to be performed at KamLAND. This report provides information on the physics case, the conceptual design for the subsystems, alternative designs considered, specifics of installation at KamLAND, and identified needs for future development. We discuss the risks we have identified and our approach to mitigating those risks with this design. A substantial portion of the conceptual design is based on three years of experimental efforts and on industry experience. This report also includes information on the conventional facilities.
△ Less
Submitted 16 November, 2015;
originally announced November 2015.
-
Whitepaper on the DAEdALUS Program
Authors:
C. Aberle,
A. Adelmann,
J. Alonso,
W. A. Barletta,
R. Barlow,
L. Bartoszek,
A. Bungau,
A. Calanna,
D. Campo,
L. Calabretta,
L. Celona,
G. Collin,
J. M. Conrad,
A. de Gouvea,
Z. Djurcic,
S. Gammino,
D. Garisto,
R. Gutierrez,
R. R. Johnson,
Y. Kamyshkov,
G. Karagiorgi,
A. Kolano,
F. Labrecque,
W. Loinaz,
H. Okuno
, et al. (12 additional authors not shown)
Abstract:
This whitepaper describes the status of the DAEdALUS program for development of high power cyclotrons as of the time of the final meeting of the Division of Particles and Fields 2013 Community Study ("Snowmass"). We report several new results, including a measurement capability between 4 and 12 degrees on the CP violating parameter in the neutrino sector. Past results, including the capability of…
▽ More
This whitepaper describes the status of the DAEdALUS program for development of high power cyclotrons as of the time of the final meeting of the Division of Particles and Fields 2013 Community Study ("Snowmass"). We report several new results, including a measurement capability between 4 and 12 degrees on the CP violating parameter in the neutrino sector. Past results, including the capability of the IsoDAR high Dm^2 antielectron neutrino disappearance search, are reviewed. A discussion of the R&D successes, including construction of a beamline teststand, and future plans are provided. This text incorporates short whitepapers written for subgroups in the Intensity Frontier and Frontier Capabilities Working Groups that are available on the Snowmass website.
△ Less
Submitted 10 July, 2013;
originally announced July 2013.
-
A Parallel General Purpose Multi-Objective Optimization Framework, with Application to Beam Dynamics
Authors:
N. Neveu,
L. Spentzouris,
A. Adelmann,
Y. Ineichen,
A. Kolano,
C. Metzger-Kraus,
C. Bekas,
A. Curioni,
P. Arbenz
Abstract:
Particle accelerators are invaluable tools for research in the basic and applied sciences, in fields such as materials science, chemistry, the biosciences, particle physics, nuclear physics and medicine. The design, commissioning, and operation of accelerator facilities is a non-trivial task, due to the large number of control parameters and the complex interplay of several conflicting design goal…
▽ More
Particle accelerators are invaluable tools for research in the basic and applied sciences, in fields such as materials science, chemistry, the biosciences, particle physics, nuclear physics and medicine. The design, commissioning, and operation of accelerator facilities is a non-trivial task, due to the large number of control parameters and the complex interplay of several conflicting design goals. We propose to tackle this problem by means of multi-objective optimization algorithms which also facilitate a parallel deployment. In order to compute solutions in a meaningful time frame a fast and scalable software framework is required. In this paper, we present the implementation of such a general-purpose framework for simulation-based multi-objective optimization methods that allows the automatic investigation of optimal sets of machine parameters. The implementation is based on a master/slave paradigm, employing several masters that govern a set of slaves executing simulations and performing optimization tasks. Using evolutionary algorithms as the optimizer and OPAL as the forward solver, validation experiments and results of multi-objective optimization problems in the domain of beam dynamics are presented. The high charge beam line at the Argonne Wakefield Accelerator Facility was used as the beam dynamics model. The 3D beam size, transverse momentum, and energy spread were optimized.
△ Less
Submitted 23 February, 2019; v1 submitted 12 February, 2013;
originally announced February 2013.
