-
The Simons Observatory: Studies of Detector Yield and Readout Noise From the First Large-Scale Deployment of Microwave Multiplexing at the Large Aperture Telescope
Authors:
Thomas P. Satterthwaite,
Zeeshan Ahmed,
Kyuyoung Bae,
Mark Devlin,
Simon Dicker,
Shannon M. Duff,
Daniel Dutcher,
Saianeesh K. Haridas,
Shawn W. Henderson,
Johannes Hubmayr,
Bradley R. Johnson,
Anna Kofman,
Jack Lashner,
Michael J. Link,
Tammy J. Lucas,
Alex Manduca,
Michael D. Niemack,
John Orlowski-Scherer,
Tristan Pinsonneault-Marotte,
Max Silva-Feaver,
Suzanne Staggs,
Eve M. Vavagiakis,
Yuhan Wang,
Kaiwen Zheng
Abstract:
The Simons Observatory is a new ground-based cosmic microwave background experiment, which is currently being commissioned in Chile's Atacama Desert. During its survey, the observatory's small aperture telescopes will map 10% of the sky in bands centered at frequencies ranging from 27 to 280 GHz to constrain cosmic inflation models, and its large aperture telescope will map 40% of the sky in the s…
▽ More
The Simons Observatory is a new ground-based cosmic microwave background experiment, which is currently being commissioned in Chile's Atacama Desert. During its survey, the observatory's small aperture telescopes will map 10% of the sky in bands centered at frequencies ranging from 27 to 280 GHz to constrain cosmic inflation models, and its large aperture telescope will map 40% of the sky in the same bands to constrain cosmological parameters and use weak lensing to study large-scale structure. To achieve these science goals, the Simons Observatory is deploying these telescopes' receivers with 60,000 state-of-the-art superconducting transition-edge sensor bolometers for its first five year survey. Reading out this unprecedented number of cryogenic sensors, however, required the development of a novel readout system. The SMuRF electronics were developed to enable high-density readout of superconducting sensors using cryogenic microwave SQUID multiplexing technology. The commissioning of the SMuRF systems at the Simons Observatory is the largest deployment to date of microwave multiplexing technology for transition-edge sensors. In this paper, we show that a significant fraction of the systems deployed so far to the Simons Observatory's large aperture telescope meet baseline specifications for detector yield and readout noise in this early phase of commissioning.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Simons Observatory: Pre-deployment Performance of a Large Aperture Telescope Optics Tube in the 90 and 150 GHz Spectral Bands
Authors:
Carlos E. Sierra,
Kathleen Harrington,
Shreya Sutariya,
Thomas Alford,
Anna M. Kofman,
Grace E. Chesmore,
Jason E. Austermann,
Andrew Bazarko,
James A. Beall,
Tanay Bhandarkar,
Mark J. Devlin,
Simon R. Dicker,
Peter N. Dow,
Shannon M. Duff,
Daniel Dutcher,
Nicholas Galitzki,
Joseph E. Golec,
John C. Groh,
Jon E. Gudmundsson,
Saianeesh K. Haridas,
Erin Healy,
Johannes Hubmayr,
Jeffrey Iuliano,
Bradley R. Johnson,
Claire S. Lessler
, et al. (20 additional authors not shown)
Abstract:
The Simons Observatory will map the temperature and polarization over half of the sky, at millimeter wavelengths in six spectral bands from the Atacama Desert in Chile. These data will provide new insights into the genesis, content, and history of our Universe; the astrophysics of galaxies and galaxy clusters; objects in our solar system; and time-varying astrophysical phenomena. This ambitious ne…
▽ More
The Simons Observatory will map the temperature and polarization over half of the sky, at millimeter wavelengths in six spectral bands from the Atacama Desert in Chile. These data will provide new insights into the genesis, content, and history of our Universe; the astrophysics of galaxies and galaxy clusters; objects in our solar system; and time-varying astrophysical phenomena. This ambitious new instrument suite, initially comprising three 0.5 m small-aperture telescopes and one 6 m large aperture telescope, is designed using a common combination of new technologies and new implementations to realize an observatory significantly more capable than the previous generation. In this paper, we present the pre-deployment performance of the first mid-frequency "optics tube" which will be fielded on the large aperture telescope with sensitivity to the 90 and 150 GHz spectral bands. This optics tube contains lenses, filters, detectors, and readout components, all of which operate at cryogenic temperatures. It is one of seven that form the core of the large aperture telescope receiver in its initial deployment. We describe this optics tube, including details of comprehensive testing methods, new techniques for beam and passband characterization, and its measured performance. The performance metrics include beams, optical efficiency, passbands, and forecasts for the on-sky performance of the system. We forecast a sensitivity that exceeds the requirements of the large aperture telescope with greater than 30% margin in each spectral band, and predict that the instrument will realize diffraction-limited performance and the expected detector passbands.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
The Simons Observatory: Design, integration, and testing of the small aperture telescopes
Authors:
Nicholas Galitzki,
Tran Tsan,
Jake Spisak,
Michael Randall,
Max Silva-Feaver,
Joseph Seibert,
Jacob Lashner,
Shunsuke Adachi,
Sean M. Adkins,
Thomas Alford,
Kam Arnold,
Peter C. Ashton,
Jason E. Austermann,
Carlo Baccigalupi,
Andrew Bazarko,
James A. Beall,
Sanah Bhimani,
Bryce Bixler,
Gabriele Coppi,
Lance Corbett,
Kevin D. Crowley,
Kevin T. Crowley,
Samuel Day-Weiss,
Simon Dicker,
Peter N. Dow
, et al. (55 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT…
▽ More
The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.
△ Less
Submitted 10 May, 2024; v1 submitted 9 May, 2024;
originally announced May 2024.
-
A Measurement of Gravitational Lensing of the Cosmic Microwave Background Using SPT-3G 2018 Data
Authors:
Z. Pan,
F. Bianchini,
W. L. K. Wu,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
B. Ansarinejad,
M. Archipley,
K. Aylor,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
E. Camphuis,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang
, et al. (111 additional authors not shown)
Abstract:
We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of th…
▽ More
We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of the lensing measurements, and report a minimum-variance combined lensing power spectrum over angular multipoles of $50<L<2000$, which we use to constrain cosmological models. When analyzed alone and jointly with primary cosmic microwave background (CMB) spectra within the $Λ$CDM model, our lensing amplitude measurements are consistent with measurements from SPT-SZ, SPTpol, ACT, and Planck. Incorporating loose priors on the baryon density and other parameters including uncertainties on a foreground bias template, we obtain a $1σ$ constraint on $σ_8 Ω_{\rm m}^{0.25}=0.595 \pm 0.026$ using the SPT-3G 2018 lensing data alone, where $σ_8$ is a common measure of the amplitude of structure today and $Ω_{\rm m}$ is the matter density parameter. Combining SPT-3G 2018 lensing measurements with baryon acoustic oscillation (BAO) data, we derive parameter constraints of $σ_8 = 0.810 \pm 0.033$, $S_8 \equiv σ_8(Ω_{\rm m}/0.3)^{0.5}= 0.836 \pm 0.039$, and Hubble constant $H_0 =68.8^{+1.3}_{-1.6}$ km s$^{-1}$ Mpc$^{-1}$. Using CMB anisotropy and lensing measurements from SPT-3G only, we provide independent constraints on the spatial curvature of $Ω_{K} = 0.014^{+0.023}_{-0.026}$ (95% C.L.) and the dark energy density of $Ω_Λ= 0.722^{+0.031}_{-0.026}$ (68% C.L.). When combining SPT-3G lensing data with SPT-3G CMB anisotropy and BAO data, we find an upper limit on the sum of the neutrino masses of $\sum m_ν< 0.30$ eV (95% C.L.).
△ Less
Submitted 29 January, 2024; v1 submitted 22 August, 2023;
originally announced August 2023.
-
Sensing microscopic noise events by frequent quantum measurements
Authors:
Salvatore Virzì,
Laura T. Knoll,
Alessio Avella,
Fabrizio Piacentini,
Stefano Gherardini,
Marco Gramegna,
Gershon Kurizki,
Abraham G. Kofman,
Ivo Pietro Degiovanni,
Marco Genovese,
Filippo Caruso
Abstract:
We propose and experimentally demonstrate a general method allowing us to unravel microscopic noise events that affect a continuous quantum variable. Such unraveling is achieved by frequent measurements of a discrete variable coupled to the continuous one. The experimental realization involves photons traversing a noisy channel. There, their polarization, whose coupling to the photons spatial wave…
▽ More
We propose and experimentally demonstrate a general method allowing us to unravel microscopic noise events that affect a continuous quantum variable. Such unraveling is achieved by frequent measurements of a discrete variable coupled to the continuous one. The experimental realization involves photons traversing a noisy channel. There, their polarization, whose coupling to the photons spatial wavepacket is subjected to stochastic noise, is frequently measured in the quantum Zeno regime. The measurements not only preserve the polarization state, but also enable the recording of the full noise statistics from the spatially-resolved detection of the photons emerging from the channel. This method proves the possibility of employing photons as quantum noise sensors and robust carriers of information.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
CCAT-prime: Design of the Mod-Cam receiver and 280 GHz MKID instrument module
Authors:
Eve M. Vavagiakis,
Cody J. Duell,
Jason Austermann,
James Beall,
Tanay Bhandarkar,
Scott C. Chapman,
Steve K. Choi,
Gabriele Coppi,
Simon Dicker,
Mark Devlin,
Rodrigo G. Freundt,
Jiansong Gao,
Christopher Groppi,
Terry L. Herter,
Zachary B. Huber,
Johannes Hubmayr,
Doug Johnstone,
Ben Keller,
Anna M. Kofman,
Yaqiong Li,
Philip Mauskopf,
Jeff McMahon,
Jenna Moore,
Colin C. Murphy,
Michael D. Niemack
, et al. (11 additional authors not shown)
Abstract:
Mod-Cam is a first light and commissioning instrument for the CCAT-prime project's six-meter aperture Fred Young Submillimeter Telescope (FYST), currently under construction at 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam, a first-generation science instrument for FYST, will deliver over ten times greater map** speed than current and near-term facilities for unprecedented 280-…
▽ More
Mod-Cam is a first light and commissioning instrument for the CCAT-prime project's six-meter aperture Fred Young Submillimeter Telescope (FYST), currently under construction at 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam, a first-generation science instrument for FYST, will deliver over ten times greater map** speed than current and near-term facilities for unprecedented 280-850 GHz broadband and spectroscopic measurements with microwave kinetic inductance detectors (MKIDs). CCAT-prime will address a suite of science goals, from Big Bang cosmology to star formation and galaxy evolution over cosmic time. Mod-Cam deployment on FYST with a 280 GHz instrument module containing MKID arrays is planned for early science observations in 2024. Mod-Cam will be used to test instrument modules for Prime-Cam, which can house up to seven instrument modules. We discuss the design and status of the 0.9 m diameter, 1.8 m long Mod-Cam receiver and 40 cm diameter 280 GHz instrument module, with cold stages at 40 K, 4 K, 1 K, and 100 mK. We also describe the instrument module's cryogenic readout designs to enable the readout of more than 10,000 MKIDs across 18 networks.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
The Simons Observatory: Development and Validation of the Large Aperture Telescope Receiver
Authors:
Tanay Bhandarkar,
Sanah Bhimani,
Gabriele Coppi,
Simon Dicker,
Saianeesh K. Haridas,
Kathleen Harrington,
Jeffrey Iuliano,
Bradley Johnson,
Anna M. Kofman,
Jack Lashner,
Jenna Moore,
David V. Nguyen,
John Orlowski-Scherer,
Karen Perez Sarmiento,
Julia Robe,
Maximiliano Silva-Feaver,
Robert J. Thornton,
Yuhan Wang,
Zhilei Xu
Abstract:
The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) survey experiment that consists of three 0.5 m small-aperture telescopes (SATs) and one 6 m large-aperture telescope (LAT), sited at an elevation of 5200 m in the Atacama Desert in Chile. In order to meet the sensitivity requirements set for next-generation CMB telescopes, the LAT will deploy 30,000 transition edge sen…
▽ More
The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) survey experiment that consists of three 0.5 m small-aperture telescopes (SATs) and one 6 m large-aperture telescope (LAT), sited at an elevation of 5200 m in the Atacama Desert in Chile. In order to meet the sensitivity requirements set for next-generation CMB telescopes, the LAT will deploy 30,000 transition edge sensor (TES) detectors at 100 mK across 7 optics tubes (OT), all within the Large Aperture Telescope Receiver (LATR). Additionally, the LATR has the capability to expand to 62,000 TES across 13 OTs. The LAT will be capable of making arcminute-resolution observations of the CMB, with detector bands centered at 30, 40, 90, 150, 230, and 280 GHz. We have rigorously tested the LATR systems prior to deployment in order to fully characterize the instrument and show that it can achieve the desired sensitivity levels. We show that the LATR meets cryogenic and mechanical requirements, and maintains acceptably low baseline readout noise.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
The Simons Observatory: Characterizing the Large Aperture Telescope Receiver with Radio Holography
Authors:
Grace E. Chesmore,
Kathleen Harrington,
Carlos E. Sierra,
Patricio A. Gallardo,
Shreya Sutariya,
Tommy Alford,
Alexandre E. Adler,
Tanay Bhandarkar,
Gabriele Coppi,
Nadia Dachlythra,
Joseph Golec,
Jon Gudmundsson,
Saianeesh K. Haridas,
Bradley R. Johnson,
Anna M. Kofman,
Jeffrey Iuliano,
Jeff McMahon,
Michael D. Niemack,
John Orlowski-Scherer,
Karen Perez Sarmiento,
Roberto Puddu,
Max Silva-Feaver,
Sara M. Simon,
Julia Robe,
Edward J. Wollack
, et al. (1 additional authors not shown)
Abstract:
We present near-field radio holography measurements of the Simons Observatory Large Aperture Telescope Receiver optics. These measurements demonstrate that radio holography of complex millimeter-wave optical systems comprising cryogenic lenses, filters, and feed horns can provide detailed characterization of wave propagation before deployment. We used the measured amplitude and phase, at 4K, of th…
▽ More
We present near-field radio holography measurements of the Simons Observatory Large Aperture Telescope Receiver optics. These measurements demonstrate that radio holography of complex millimeter-wave optical systems comprising cryogenic lenses, filters, and feed horns can provide detailed characterization of wave propagation before deployment. We used the measured amplitude and phase, at 4K, of the receiver near-field beam pattern to predict two key performance parameters: 1) the amount of scattered light that will spill past the telescope to 300K and 2) the beam pattern expected from the receiver when fielded on the telescope. These cryogenic measurements informed the removal of a filter, which led to improved optical efficiency and reduced side-lobes at the exit of the receiver. Holography measurements of this system suggest that the spilled power past the telescope mirrors will be less than 1\% and the main beam with its near side-lobes are consistent with the nominal telescope design. This is the first time such parameters have been confirmed in the lab prior to deployment of a new receiver. This approach is broadly applicable to millimeter and sub-millimeter instruments.
△ Less
Submitted 1 December, 2022; v1 submitted 14 July, 2022;
originally announced July 2022.
-
Asteroid Measurements at Millimeter Wavelengths with the South Pole Telescope
Authors:
P. M. Chichura,
A. Foster,
C. Patel,
N. Ossa-Jaen,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
M. Archipley,
J. E. Austermann,
J. S. Avva,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
J. A. Beall,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil
, et al. (119 additional authors not shown)
Abstract:
We present the first measurements of asteroids in millimeter wavelength (mm) data from the South Pole Telescope (SPT), which is used primarily to study the cosmic microwave background (CMB). We analyze maps of two $\sim270$ deg$^2$ sky regions near the ecliptic plane, each observed with the SPTpol camera $\sim100$ times over one month. We subtract the mean of all maps of a given field, removing st…
▽ More
We present the first measurements of asteroids in millimeter wavelength (mm) data from the South Pole Telescope (SPT), which is used primarily to study the cosmic microwave background (CMB). We analyze maps of two $\sim270$ deg$^2$ sky regions near the ecliptic plane, each observed with the SPTpol camera $\sim100$ times over one month. We subtract the mean of all maps of a given field, removing static sky signal, and then average the mean-subtracted maps at known asteroid locations. We detect three asteroids$\text{ -- }$(324) Bamberga, (13) Egeria, and (22) Kalliope$\text{ -- }$with signal-to-noise ratios (S/N) of 11.2, 10.4, and 6.1, respectively, at 2.0 mm (150 GHz); we also detect (324) Bamberga with S/N of 4.1 at 3.2 mm (95 GHz). We place constraints on these asteroids' effective emissivities, brightness temperatures, and light curve modulation amplitude. Our flux density measurements of (324) Bamberga and (13) Egeria roughly agree with predictions, while our measurements of (22) Kalliope suggest lower flux, corresponding to effective emissivities of $0.66 \pm 0.11$ at 2.0 mm and $<0.47$ at 3.2mm. We predict the asteroids detectable in other SPT datasets and find good agreement with detections of (772) Tanete and (1093) Freda in recent data from the SPT-3G camera, which has $\sim10 \times$ the map** speed of SPTpol. This work is the first focused analysis of asteroids in data from CMB surveys, and it demonstrates we can repurpose historic and future datasets for asteroid studies. Future SPT measurements can help constrain the distribution of surface properties over a larger asteroid population.
△ Less
Submitted 21 April, 2023; v1 submitted 2 February, 2022;
originally announced February 2022.
-
The Simons Observatory: Design and Measured Performance of a Carbon Fiber Strut for a Cryogenic Truss
Authors:
Kevin D. Crowley,
Peter Dow,
Jordan E. Shroyer,
John C. Groh,
Bradley Dober,
Jacob Spisak,
Nicholas Galitzki,
Tanay Bhandarkar,
Mark J. Devlin,
Simon Dicker,
Patricio A. Gallardo,
Kathleen Harrington,
Bradley R. Johnson,
Delwin Johnson,
Anna M. Kofman,
Akito Kusaka,
Adrian Lee,
Michele Limon,
Jeffrey Iuliano,
Federico Nati,
John Orlowski-Scherer,
Lyman Page,
Michael Randall,
Grant Teply,
Tran Tsan
, et al. (3 additional authors not shown)
Abstract:
We present the design and measured performance of a new carbon fiber strut design that is used in a cryogenically cooled truss for the Simons Observatory Small Aperture Telescope (SAT). The truss consists of two aluminum 6061 rings separated by 24 struts. Each strut consists of a central carbon fiber tube fitted with two aluminum end caps. We tested the performance of the strut and truss by (i) cr…
▽ More
We present the design and measured performance of a new carbon fiber strut design that is used in a cryogenically cooled truss for the Simons Observatory Small Aperture Telescope (SAT). The truss consists of two aluminum 6061 rings separated by 24 struts. Each strut consists of a central carbon fiber tube fitted with two aluminum end caps. We tested the performance of the strut and truss by (i) cryogenically cycling and destructively pull-testing strut samples, (ii) non-destructively pull-testing the final truss, and (iii) measuring the thermal conductivity of the carbon fiber tubes. We found that the strut strength is limited by the mounting fasteners and the strut end caps, not the epoxy adhesive or the carbon fiber tube. This result is consistent with our numerical predictions. Our thermal measurements suggest that the conductive heat load through the struts (from 4 K to 1 K) will be less than 1 mW. This strut design may be a promising candidate for use in other cryogenic support structures.
△ Less
Submitted 18 January, 2022; v1 submitted 16 January, 2022;
originally announced January 2022.
-
Nonlinear coherent heat machines and closed-system thermodynamics
Authors:
Tomáš Opatrný,
Šimon Bräuer,
Abraham G. Kofman,
Avijit Misra,
Nilakantha Meher,
Ofer Firstenberg,
Eilon Poem,
Gershon Kurizki
Abstract:
All existing heat machines are dissipative open systems. Hence, they cannot operate fully coherently. We propose to replace this conventional thermodynamic paradigm by a completely different one, whereby heat machines are nonlinear coherent closed systems comprised of few field modes. Their thermal-state input is transformed by nonlinear interactions into non-thermal output with controlled quantum…
▽ More
All existing heat machines are dissipative open systems. Hence, they cannot operate fully coherently. We propose to replace this conventional thermodynamic paradigm by a completely different one, whereby heat machines are nonlinear coherent closed systems comprised of few field modes. Their thermal-state input is transformed by nonlinear interactions into non-thermal output with controlled quantum fluctuations and the capacity to deliver work in a chosen mode. This new paradigm allows the bridging of quantum coherent and thermodynamic descriptions.
△ Less
Submitted 31 July, 2022; v1 submitted 23 August, 2021;
originally announced August 2021.
-
The Simons Observatory microwave SQUID multiplexing detector module design
Authors:
Heather McCarrick,
Erin Healy,
Zeeshan Ahmed,
Kam Arnold,
Zachary Atkins,
Jason E. Austermann,
Tanay Bhandarkar,
Jim A. Beall,
Sarah Marie Bruno,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothard,
Kevin D. Crowley,
Simon Dicker,
Bradley Dober,
Cody J. Duell,
Shannon M. Duff,
Daniel Dutcher,
Josef C. Frisch,
Nicholas Galitzki,
Megan B. Gralla,
Jon E. Gudmundsson,
Shawn W. Henderson,
Gene C. Hilton,
Shuay-Pwu Patty Ho
, et al. (34 additional authors not shown)
Abstract:
Advances in cosmic microwave background (CMB) science depend on increasing the number of sensitive detectors observing the sky. New instruments deploy large arrays of superconducting transition-edge sensor (TES) bolometers tiled densely into ever larger focal planes. High multiplexing factors reduce the thermal loading on the cryogenic receivers and simplify their design. We present the design of…
▽ More
Advances in cosmic microwave background (CMB) science depend on increasing the number of sensitive detectors observing the sky. New instruments deploy large arrays of superconducting transition-edge sensor (TES) bolometers tiled densely into ever larger focal planes. High multiplexing factors reduce the thermal loading on the cryogenic receivers and simplify their design. We present the design of focal-plane modules with an order of magnitude higher multiplexing factor than has previously been achieved with TES bolometers. We focus on the novel cold readout component, which employs microwave SQUID multiplexing ($μ$mux). Simons Observatory will use 49 modules containing 60,000 bolometers to make exquisitely sensitive measurements of the CMB. We validate the focal-plane module design, presenting measurements of the readout component with and without a prototype detector array of 1728 polarization-sensitive bolometers coupled to feedhorns. The readout component achieves a $95\%$ yield and a 910 multiplexing factor. The median white noise of each readout channel is 65 $\mathrm{pA/\sqrt{Hz}}$. This impacts the projected SO map** speed by $< 8\%$, which is less than is assumed in the sensitivity projections. The results validate the full functionality of the module. We discuss the measured performance in the context of SO science requirements, which are exceeded.
△ Less
Submitted 16 September, 2021; v1 submitted 28 June, 2021;
originally announced June 2021.
-
The Design and Integrated Performance of SPT-3G
Authors:
J. A. Sobrin,
A. J. Anderson,
A. N. Bender,
B. A. Benson,
D. Dutcher,
A. Foster,
N. Goeckner-Wald,
J. Montgomery,
A. Nadolski,
A. Rahlin,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
M. Archipley,
J. E. Austermann,
J. S. Avva,
K. Aylor,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant
, et al. (98 additional authors not shown)
Abstract:
SPT-3G is the third survey receiver operating on the South Pole Telescope dedicated to high-resolution observations of the cosmic microwave background (CMB). Sensitive measurements of the temperature and polarization anisotropies of the CMB provide a powerful dataset for constraining cosmology. Additionally, CMB surveys with arcminute-scale resolution are capable of detecting galaxy clusters, mill…
▽ More
SPT-3G is the third survey receiver operating on the South Pole Telescope dedicated to high-resolution observations of the cosmic microwave background (CMB). Sensitive measurements of the temperature and polarization anisotropies of the CMB provide a powerful dataset for constraining cosmology. Additionally, CMB surveys with arcminute-scale resolution are capable of detecting galaxy clusters, millimeter-wave bright galaxies, and a variety of transient phenomena. The SPT-3G instrument provides a significant improvement in map** speed over its predecessors, SPT-SZ and SPTpol. The broadband optics design of the instrument achieves a 430 mm diameter image plane across observing bands of 95 GHz, 150 GHz, and 220 GHz, with 1.2 arcmin FWHM beam response at 150 GHz. In the receiver, this image plane is populated with 2690 dual-polarization, tri-chroic pixels (~16000 detectors) read out using a 68X digital frequency-domain multiplexing readout system. In 2018, SPT-3G began a multiyear survey of 1500 deg$^{2}$ of the southern sky. We summarize the unique optical, cryogenic, detector, and readout technologies employed in SPT-3G, and we report on the integrated performance of the instrument.
△ Less
Submitted 25 February, 2022; v1 submitted 21 June, 2021;
originally announced June 2021.
-
The Simons Observatory: the Large Aperture Telescope (LAT)
Authors:
Zhilei Xu,
Shunsuke Adachi,
Peter Ade,
J. A. Beall,
Tanay Bhandarkar,
J. Richard Bond,
Grace E. Chesmore,
Yuji Chinone,
Steve K. Choi,
Jake A. Connors,
Gabriele Coppi,
Nicholas F. Cothard,
Kevin D. Crowley,
Mark Devlin,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Nicholas Galitzki,
Patricio A. Gallardo,
Joseph E. Golec,
Jon E. Gudmundsson,
Saianeesh K. Haridas,
Kathleen Harrington,
Carlos Hervias-Caimapo,
Shuay-Pwu Patty Ho
, et al. (35 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its…
▽ More
The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its future timeline.
△ Less
Submitted 29 April, 2021; v1 submitted 19 April, 2021;
originally announced April 2021.
-
Performance and characterization of the SPT-3G digital frequency-domain multiplexed readout system using an improved noise and crosstalk model
Authors:
J. Montgomery,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
M. Archipley,
J. S. Avva,
K. Aylor,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
G. Chen
, et al. (96 additional authors not shown)
Abstract:
The third generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5x expansion in the readout op…
▽ More
The third generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5x expansion in the readout operating bandwidth has enabled the use of this large focal plane, and SPT-3G performance meets the forecasting targets relevant to its science objectives. However, the electrical dynamics of the higher-bandwidth readout differ from predictions based on models of the SPTpol system due to the higher frequencies used, and parasitic impedances associated with new cryogenic electronic architecture. To address this, we present an updated derivation for electrical crosstalk in higher-bandwidth DfMUX systems, and identify two previously uncharacterized contributions to readout noise, which become dominant at high bias frequency. The updated crosstalk and noise models successfully describe the measured crosstalk and readout noise performance of SPT-3G. These results also suggest specific changes to warm electronics component values, wire-harness properties, and SQUID parameters, to improve the readout system for future experiments using DfMUX, such as the LiteBIRD space telescope.
△ Less
Submitted 21 February, 2022; v1 submitted 29 March, 2021;
originally announced March 2021.
-
Constraints on $Λ$CDM Extensions from the SPT-3G 2018 $EE$ and $TE$ Power Spectra
Authors:
L. Balkenhol,
D. Dutcher,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
M. Archipley,
J. S. Avva,
K. Aylor,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
G. Chen
, et al. (95 additional authors not shown)
Abstract:
We present constraints on extensions to the $Λ$CDM cosmological model from measurements of the $E$-mode polarization auto-power spectrum and the temperature-$E$-mode cross-power spectrum of the cosmic microwave background (CMB) made using 2018 SPT-3G data. The extensions considered vary the primordial helium abundance, the effective number of relativistic degrees of freedom, the sum of neutrino ma…
▽ More
We present constraints on extensions to the $Λ$CDM cosmological model from measurements of the $E$-mode polarization auto-power spectrum and the temperature-$E$-mode cross-power spectrum of the cosmic microwave background (CMB) made using 2018 SPT-3G data. The extensions considered vary the primordial helium abundance, the effective number of relativistic degrees of freedom, the sum of neutrino masses, the relativistic energy density and mass of a sterile neutrino, and the mean spatial curvature. We do not find clear evidence for any of these extensions, from either the SPT-3G 2018 dataset alone or in combination with baryon acoustic oscillation and \textit{Planck} data. None of these model extensions significantly relax the tension between Hubble-constant, $H_0$, constraints from the CMB and from distance-ladder measurements using Cepheids and supernovae. The addition of the SPT-3G 2018 data to \textit{Planck} reduces the square-root of the determinants of the parameter covariance matrices by factors of $1.3 - 2.0$ across these models, signaling a substantial reduction in the allowed parameter volume. We also explore CMB-based constraints on $H_0$ from combined SPT, \textit{Planck}, and ACT DR4 datasets. While individual experiments see some indications of different $H_0$ values between the $TT$, $TE$, and $EE$ spectra, the combined $H_0$ constraints are consistent between the three spectra. For the full combined datasets, we report $H_0 = 67.49 \pm 0.53\,\mathrm{km\,s^{-1}\,Mpc^{-1}}$, which is the tightest constraint on $H_0$ from CMB power spectra to date and in $4.1\,σ$ tension with the most precise distance-ladder-based measurement of $H_0$. The SPT-3G survey is planned to continue through at least 2023, with existing maps of combined 2019 and 2020 data already having $\sim3.5\times$ lower noise than the maps used in this analysis.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Detection of Galactic and Extragalactic Millimeter-Wavelength Transient Sources with SPT-3G
Authors:
S. Guns,
A. Foster,
C. Daley,
A. Rahlin,
N. Whitehorn,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
M. Archipley,
J. S. Avva,
K. Aylor,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter
, et al. (97 additional authors not shown)
Abstract:
High-angular-resolution cosmic microwave background experiments provide a unique opportunity to conduct a survey of time-variable sources at millimeter wavelengths, a population which has primarily been understood through follow-up measurements of detections in other bands. Here we report the first results of an astronomical transient survey with the South Pole Telescope (SPT) using the SPT-3G cam…
▽ More
High-angular-resolution cosmic microwave background experiments provide a unique opportunity to conduct a survey of time-variable sources at millimeter wavelengths, a population which has primarily been understood through follow-up measurements of detections in other bands. Here we report the first results of an astronomical transient survey with the South Pole Telescope (SPT) using the SPT-3G camera to observe 1500 square degrees of the southern sky. The observations took place from March to November 2020 in three bands centered at 95, 150, and 220 GHz. This survey yielded the detection of fifteen transient events from sources not previously detected by the SPT. The majority are associated with variable stars of different types, expanding the number of such detected flares by more than a factor of two. The stellar flares are unpolarized and bright, in some cases exceeding 1 Jy, and have durations from a few minutes to several hours. Another population of detected events last for 2--3 weeks and appear to be extragalactic in origin. Though data availability at other wavelengths is limited, we find evidence for concurrent optical activity for two of the stellar flares. Future data from SPT-3G and forthcoming instruments will provide real-time detection of millimeter-wave transients on timescales of minutes to months.
△ Less
Submitted 8 June, 2021; v1 submitted 10 March, 2021;
originally announced March 2021.
-
Quantum Zeno and Anti-Zeno probes of noise correlations in photon polarisation
Authors:
Salvatore Virzi',
Alessio Avella,
Fabrizio Piacentini,
Marco Gramegna,
Tomas Opatrny,
Abraham Kofman,
Gershon Kurizki,
Stefano Gherardini,
Filippo Caruso,
Ivo Pietro Degiovanni,
Marco Genovese
Abstract:
We experimentally demonstrate, for the first time, noise diagnostics by repeated quantum measurements. Specifically, we establish the ability of a single photon, subjected to random polarisation noise, to diagnose non-Markovian temporal correlations of such a noise process. In the frequency domain, these noise correlations correspond to colored noise spectra, as opposed to the ones related to Mark…
▽ More
We experimentally demonstrate, for the first time, noise diagnostics by repeated quantum measurements. Specifically, we establish the ability of a single photon, subjected to random polarisation noise, to diagnose non-Markovian temporal correlations of such a noise process. In the frequency domain, these noise correlations correspond to colored noise spectra, as opposed to the ones related to Markovian, white noise. Both the noise spectrum and its corresponding temporal correlations are diagnosed by probing the photon by means of frequent, (partially-)selective polarisation measurements. Our main result is the experimental demonstration that noise with positive temporal correlations corresponds to our single photon undergoing a dynamical regime enabled by the quantum Zeno effect (QZE), while noise characterized by negative (anti-) correlations corresponds to regimes associated with the anti-Zeno effect (AZE). This demonstration opens the way to a new kind of noise spectroscopy based on QZE and AZE in photon (or other single-particle) state probing.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
The Simons Observatory Large Aperture Telescope Receiver
Authors:
Ningfeng Zhu,
Tanay Bhandarkar,
Gabriele Coppi,
Anna M. Kofman,
John L. Orlowski-Scherer,
Zhilei Xu,
Shunsuke Adachi,
Peter Ade,
Simone Aiola,
Jason Austermann,
Andrew O. Bazarko,
James A. Beall,
Sanah Bhimani,
J. Richard Bond,
Grace E. Chesmore,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothard,
Mark Devlin,
Simon Dicker,
Bradley Dober,
Cody J. Duell,
Shannon M. Duff,
Rolando Dünner,
Giulio Fabbian
, et al. (46 additional authors not shown)
Abstract:
The Simons Observatory (SO) Large Aperture Telescope Receiver (LATR) will be coupled to the Large Aperture Telescope located at an elevation of 5,200 m on Cerro Toco in Chile. The resulting instrument will produce arcminute-resolution millimeter-wave maps of half the sky with unprecedented precision. The LATR is the largest cryogenic millimeter-wave camera built to date with a diameter of 2.4 m an…
▽ More
The Simons Observatory (SO) Large Aperture Telescope Receiver (LATR) will be coupled to the Large Aperture Telescope located at an elevation of 5,200 m on Cerro Toco in Chile. The resulting instrument will produce arcminute-resolution millimeter-wave maps of half the sky with unprecedented precision. The LATR is the largest cryogenic millimeter-wave camera built to date with a diameter of 2.4 m and a length of 2.6 m. It cools 1200 kg of material to 4 K and 200 kg to 100 mk, the operating temperature of the bolometric detectors with bands centered around 27, 39, 93, 145, 225, and 280 GHz. Ultimately, the LATR will accommodate 13 40 cm diameter optics tubes, each with three detector wafers and a total of 62,000 detectors. The LATR design must simultaneously maintain the optical alignment of the system, control stray light, provide cryogenic isolation, limit thermal gradients, and minimize the time to cool the system from room temperature to 100 mK. The interplay between these competing factors poses unique challenges. We discuss the trade studies involved with the design, the final optimization, the construction, and ultimate performance of the system.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
The Integration and Testing Program for the Simons Observatory Large Aperture Telescope Optics Tubes
Authors:
Kathleen Harrington,
Carlos Sierra,
Grace Chesmore,
Shreya Sutariya,
Aamir M. Ali,
Steve K. Choi,
Nicholas F. Cothard,
Simon Dicker,
Nicholas Galitzki,
Shuay-Pwu Patty Ho,
Anna M. Kofman,
Brian J. Koopman,
Jack Lashner,
Jeff McMahon,
Michael D. Niemack,
John Orlowski-Scherer,
Joseph Seibert,
Max Silva-Feaver,
Eve M. Vavagiakis,
Zhilei Xu,
Ningfeng Zhu
Abstract:
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure…
▽ More
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities, as outlined in The Simons Observatory Collaboration et al. (2019). The 6~m Large Aperture Telescope (LAT), which will target the smaller angular scales of the CMB, utilizes a cryogenic receiver (LATR) designed to house up to 13 individual optics tubes. Each optics tube is comprised of three silicon lenses, IR blocking filters, and three dual-polarization, dichroic TES detector wafers. The scientific objectives of the SO project require these optics tubes to achieve high-throughput optical performance while maintaining exquisite control of systematic effects. We describe the integration and testing program for the SO LATR optics tubes that will verify the design and assembly of the optics tubes before they are shipped to the SO site and installed in the LATR cryostat. The program includes a quick turn-around test cryostat that is used to cool single optics tubes and validate the cryogenic performance and detector readout assembly. We discuss the optical design specifications the optics tubes must meet to be deployed on sky and the suite of optical test equipment that is prepared to measure these requirements.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Measurements of the E-Mode Polarization and Temperature-E-Mode Correlation of the CMB from SPT-3G 2018 Data
Authors:
D. Dutcher,
L. Balkenhol,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
M. Archipley,
J. S. Avva,
K. Aylor,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
G. Chen
, et al. (96 additional authors not shown)
Abstract:
We present measurements of the $E$-mode ($EE$) polarization power spectrum and temperature-$E$-mode ($TE$) cross-power spectrum of the cosmic microwave background using data collected by SPT-3G, the latest instrument installed on the South Pole Telescope. This analysis uses observations of a 1500 deg$^2$ region at 95, 150, and 220 GHz taken over a four month period in 2018. We report binned values…
▽ More
We present measurements of the $E$-mode ($EE$) polarization power spectrum and temperature-$E$-mode ($TE$) cross-power spectrum of the cosmic microwave background using data collected by SPT-3G, the latest instrument installed on the South Pole Telescope. This analysis uses observations of a 1500 deg$^2$ region at 95, 150, and 220 GHz taken over a four month period in 2018. We report binned values of the $EE$ and $TE$ power spectra over the angular multipole range $300 \le \ell < 3000$, using the multifrequency data to construct six semi-independent estimates of each power spectrum and their minimum-variance combination. These measurements improve upon the previous results of SPTpol across the multipole ranges $300 \le \ell \le 1400$ for $EE$ and $300 \le \ell \le 1700$ for $TE$, resulting in constraints on cosmological parameters comparable to those from other current leading ground-based experiments. We find that the SPT-3G dataset is well-fit by a $Λ$CDM cosmological model with parameter constraints consistent with those from Planck and SPTpol data. From SPT-3G data alone, we find $H_0 = 68.8 \pm 1.5 \mathrm{km\,s^{-1}\,Mpc^{-1}}$ and $σ_8 = 0.789 \pm 0.016$, with a gravitational lensing amplitude consistent with the $Λ$CDM prediction ($A_L = 0.98 \pm 0.12$). We combine the SPT-3G and the Planck datasets and obtain joint constraints on the $Λ$CDM model. The volume of the 68% confidence region in six-dimensional $Λ$CDM parameter space is reduced by a factor of 1.5 compared to Planck-only constraints, with only slight shifts in central values. We note that the results presented here are obtained from data collected during just half of a typical observing season with only part of the focal plane operable, and that the active detector count has since nearly doubled for observations made with SPT-3G after 2018.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
The Simons Observatory: the Large Aperture Telescope Receiver (LATR) Integration and Validation Results
Authors:
Zhilei Xu,
Tanay Bhandarkar,
Gabriele Coppi,
Anna M. Kofman,
John L. Orlowski-Scherer,
Ningfeng Zhu,
Aamir M. Ali,
Kam Arnold,
Jason E. Austermann,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothard,
Mark Devlin,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Giulio Fabbian,
Nicholas Galitzki,
Saianeesh K. Haridas,
Kathleen Harrington,
Erin Healy,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Jeffrey Iuliano,
Jack Lashner
, et al. (20 additional authors not shown)
Abstract:
The Simons Observatory (SO) will observe the cosmic microwave background (CMB) from Cerro Toco in the Atacama Desert of Chile. The observatory consists of three 0.5 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT), covering six frequency bands centering around 30, 40, 90, 150, 230, and 280 GHz. The SO observations will transform the understanding of our universe by cha…
▽ More
The Simons Observatory (SO) will observe the cosmic microwave background (CMB) from Cerro Toco in the Atacama Desert of Chile. The observatory consists of three 0.5 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT), covering six frequency bands centering around 30, 40, 90, 150, 230, and 280 GHz. The SO observations will transform the understanding of our universe by characterizing the properties of the early universe, measuring the number of relativistic species and the mass of neutrinos, improving our understanding of galaxy evolution, and constraining the properties of cosmic reionization. As a critical instrument, the Large Aperture Telescope Receiver (LATR) is designed to cool $\sim$ 60,000 transition-edge sensors (TES) to $<$ 100 mK on a 1.7 m diameter focal plane. The unprecedented scale of the LATR drives a complex design. In this paper, we will first provide an overview of the LATR design. Integration and validation of the LATR design are discussed in detail, including mechanical strength, optical alignment, and cryogenic performance of the five cryogenic stages (80 K, 40 K, 4 K, 1 K, and 100 mK). We will also discuss the microwave-multiplexing ($μ$Mux) readout system implemented in the LATR and demonstrate the operation of dark prototype TES bolometers. The $μ$Mux readout technology enables one coaxial loop to read out $\mathcal{O}(10^3)$ TES detectors. Its implementation within the LATR serves as a critical validation for the complex RF chain design. The successful validation of the LATR performance is not only a critical milestone within the Simons Observatory, it also provides a valuable reference for other experiments, e.g. CCAT-prime and CMB-S4.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
The Simons Observatory: Metamaterial Microwave Absorber (MMA) and its Cryogenic Applications
Authors:
Zhilei Xu,
Grace E. Chesmore,
Shunsuke Adachi,
Aamir M. Ali,
Andrew Bazarko,
Gabriele Coppi,
Mark Devlin,
Tom Devlin,
Simon R. Dicker,
Patricio A. Gallardo,
Joseph E. Golec,
Jon E. Gudmundsson,
Kathleen Harrington,
Makoto Hattori,
Anna Kofman,
Kenji Kiuchi,
Akito Kusaka,
Michele Limon,
Frederick Matsuda,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
Shreya Sutariya,
Aritoki Suzuki,
Grant P. Teply
, et al. (4 additional authors not shown)
Abstract:
Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as…
▽ More
Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as commercial microwave absorbers, their applications in cryogenic environments are challenging. In this paper, we present a new tool to control stray light: metamaterial microwave absorber tiles. These tiles comprise an outer metamaterial layer that approximates a lossy gradient index anti-reflection coating. They are fabricated via injection molding commercially available carbon-loaded polyurethane (25\% by mass). The injection molding technology enables mass production at low cost. The design of these tiles is presented, along with thermal tests to 1 K. Room temperature optical measurements verify their control of reflectance to less than 1\% up to 65$\circ$ angles of incidence, and control of wide angle scattering below 0.01\%. The dielectric properties of the bulk carbon-loaded material used in the tiles is also measured at different temperatures, confirming that the material maintains similar dielectric properties down to 3 K.
△ Less
Submitted 22 February, 2021; v1 submitted 5 October, 2020;
originally announced October 2020.
-
The Simons Observatory: Modeling Optical Systematics in the Large Aperture Telescope
Authors:
Jon E. Gudmundsson,
Patricio A. Gallardo,
Roberto Puddu,
Simon R. Dicker,
Alexandre E. Adler,
Aamir M. Ali,
Andrew Bazarko,
Grace E. Chesmore,
Gabriele Coppi,
Nicholas F. Cothard,
Nadia Dachlythra,
Mark Devlin,
Rolando Dünner,
Giulio Fabbian,
Nicholas Galitzki,
Joseph E. Golec,
Shuay-Pwu Patty Ho,
Peter C. Hargrave,
Anna M. Kofman,
Adrian T. Lee,
Michele Limon,
Frederick T. Matsuda,
Philip D. Mauskopf,
Kavilan Moodley,
Federico Nati
, et al. (13 additional authors not shown)
Abstract:
We present geometrical and physical optics simulation results for the Simons Observatory Large Aperture Telescope. This work was developed as part of the general design process for the telescope; allowing us to evaluate the impact of various design choices on performance metrics and potential systematic effects. The primary goal of the simulations was to evaluate the final design of the reflectors…
▽ More
We present geometrical and physical optics simulation results for the Simons Observatory Large Aperture Telescope. This work was developed as part of the general design process for the telescope; allowing us to evaluate the impact of various design choices on performance metrics and potential systematic effects. The primary goal of the simulations was to evaluate the final design of the reflectors and the cold optics which are now being built. We describe non-sequential ray tracing used to inform the design of the cold optics, including absorbers internal to each optics tube. We discuss ray tracing simulations of the telescope structure that allow us to determine geometries that minimize detector loading and mitigate spurious near-field effects that have not been resolved by the internal baffling. We also describe physical optics simulations, performed over a range of frequencies and field locations, that produce estimates of monochromatic far field beam patterns which in turn are used to gauge general optical performance. Finally, we describe simulations that shed light on beam sidelobes from panel gap diffraction.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Simons Observatory Microwave SQUID Multiplexing Readout -- Cryogenic RF Amplifier and Coaxial Chain Design
Authors:
Mayuri Sathyanarayana Rao,
Maximiliano Silva-Feaver,
Aamir Ali,
Kam Arnold,
Peter Ashton,
Bradley J. Dober,
Cody J. Duell,
Shannon M. Duff,
Nicholas Galitzki,
Erin Healy,
Shawn Henderson,
Shuay-Pwu Patty Ho,
Jonathan Hoh,
Anna M. Kofman,
Akito Kusaka,
Adrian T. Lee,
Aashrita Mangu,
Justin Mathewson,
Philip Mauskopf,
Heather McCarrick,
Jenna Moore,
Michael D. Niemack,
Christopher Raum,
Maria Salatino,
Trevor Sasse
, et al. (11 additional authors not shown)
Abstract:
The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiple…
▽ More
The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiplexing factor of \bigO{(1,000)}, microwave SQUID multiplexing has never been deployed on the scale needed for SO. Here we present the design of the cryogenic coaxial cable and RF component chain that connects room temperature readout electronics to superconducting resonators that are coupled to Transition Edge Sensor bolometers operating at sub-Kelvin temperatures. We describe design considerations including cryogenic RF component selection, system linearity, noise, and thermal power dissipation.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
Broadband, millimeter-wave antireflection coatings for large-format, cryogenic aluminum oxide optics
Authors:
A. Nadolski,
J. D. Vieira,
J. A. Sobrin,
A. M. Kofman,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
L. Bryant,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
J. R. Cheshire IV,
G. E. Chesmore,
J. F. Cliche,
A. Cukierman,
T. de Haan,
M. Dierickx,
J. Ding,
D. Dutcher,
W. Everett
, et al. (64 additional authors not shown)
Abstract:
We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of com…
▽ More
We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of commercially-available, polytetrafluoroethylene-based, dielectric sheet material. The lenslet coating is molded to fit the 150 mm diameter arrays directly while the large-diameter lenses are coated using a tiled approach. We review the fabrication processes for both prescriptions then discuss laboratory measurements of their transmittance and reflectance. In addition, we present the inferred refractive indices and loss tangents for the coating materials and the aluminum oxide substrate. We find that at 150 GHz and 300 K the large-format coating sample achieves (97 +/- 2)% transmittance and the lenslet coating sample achieves (94 +/- 3)% transmittance.
△ Less
Submitted 2 March, 2020; v1 submitted 6 December, 2019;
originally announced December 2019.
-
Particle Physics with the Cosmic Microwave Background with SPT-3G
Authors:
J. S. Avva,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
K. Aylor,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
L. E. Bleem,
S. Bocquet,
L. Bryant,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
T. M. Crawford,
A. Cukierman,
T. de Haan,
J. Ding,
M. A. Dobbs,
S. Dodelson,
D. Dutcher,
W. Everett,
K. R. Ferguson,
A. Foster
, et al. (63 additional authors not shown)
Abstract:
The cosmic microwave background (CMB) encodes information about the content and evolution of the universe. The presence of light, weakly interacting particles impacts the expansion history of the early universe, which alters the temperature and polarization anisotropies of the CMB. In this way, current measurements of the CMB place interesting constraints on the neutrino energy density and mass, a…
▽ More
The cosmic microwave background (CMB) encodes information about the content and evolution of the universe. The presence of light, weakly interacting particles impacts the expansion history of the early universe, which alters the temperature and polarization anisotropies of the CMB. In this way, current measurements of the CMB place interesting constraints on the neutrino energy density and mass, as well as on the abundance of other possible light relativistic particle species. We present the status of an on-going 1500 sq. deg. survey with the SPT-3G receiver, a new mm-wavelength camera on the 10-m diameter South Pole Telescope (SPT). The SPT-3G camera consists of 16,000 superconducting transition edge sensors, a 10x increase over the previous generation camera, which allows it to map the CMB with an unprecedented combination of sensitivity and angular resolution. We highlight projected constraints on the abundance of sterile neutrinos and the sum of the neutrino masses for the SPT-3G survey, which could help determine the neutrino mass hierarchy.
△ Less
Submitted 18 November, 2019;
originally announced November 2019.
-
Performance of Al-Mn Transition-Edge Sensor Bolometers in SPT-3G
Authors:
A. J. Anderson,
P. A. R. Ade,
Z. Ahmed,
J. S. Avva,
P. S. Barry,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
H. -M. Cho,
J. F. Cliche,
A. Cukierman,
T. de Haan,
E. V. Denison,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
K. R. Ferguson,
A. Foster
, et al. (64 additional authors not shown)
Abstract:
SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of the…
▽ More
SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of these detector wafers was replaced by a new wafer fabricated with Al-Mn TESs instead of the Ti/Au design originally deployed for SPT-3G. We present the results of in-lab characterization and on-sky performance of this Al-Mn wafer, including electrical and thermal properties, optical efficiency measurements, and noise-equivalent temperature. In addition, we discuss and account for several calibration-related systematic errors that affect measurements made using frequency-domain multiplexing readout electronics.
△ Less
Submitted 27 July, 2019;
originally announced July 2019.
-
On-sky performance of the SPT-3G frequency-domain multiplexed readout
Authors:
A. N. Bender,
A. J. Anderson,
J. S. Avva,
P. A. R. Ade,
Z. Ahmed,
P. S. Barry,
R. Basu Thakur,
B. A. Benson,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
H. -M. Cho,
J. F. Cliche,
A. Cukierman,
T. de Haan,
E. V. Denison,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
K. R. Ferguson,
A. Foster
, et al. (64 additional authors not shown)
Abstract:
Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current…
▽ More
Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current receiver on the South Pole Telescope, SPT-3G, uses a 68x fMux system to operate its large-format camera of $\sim$16,000 TES bolometers. We present here the successful implementation and performance of the SPT-3G readout as measured on-sky. Characterization of the noise reveals a median pair-differenced 1/f knee frequency of 33 mHz, indicating that low-frequency noise in the readout will not limit SPT-3G's measurements of sky power on large angular scales. Measurements also show that the median readout white noise level in each of the SPT-3G observing bands is below the expectation for photon noise, demonstrating that SPT-3G is operating in the photon-noise-dominated regime.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
The Simons Observatory: Astro2020 Decadal Project Whitepaper
Authors:
The Simons Observatory Collaboration,
Maximilian H. Abitbol,
Shunsuke Adachi,
Peter Ade,
James Aguirre,
Zeeshan Ahmed,
Simone Aiola,
Aamir Ali,
David Alonso,
Marcelo A. Alvarez,
Kam Arnold,
Peter Ashton,
Zachary Atkins,
Jason Austermann,
Humna Awan,
Carlo Baccigalupi,
Taylor Baildon,
Anton Baleato Lizancos,
Darcy Barron,
Nick Battaglia,
Richard Battye,
Eric Baxter,
Andrew Bazarko,
James A. Beall,
Rachel Bean
, et al. (258 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021…
▽ More
The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021 and start a five year survey in 2022. SO has 287 collaborators from 12 countries and 53 institutions, including 85 students and 90 postdocs.
The SO experiment in its currently funded form ('SO-Nominal') consists of three 0.4 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT). Optimized for minimizing systematic errors in polarization measurements at large angular scales, the SATs will perform a deep, degree-scale survey of 10% of the sky to search for the signature of primordial gravitational waves. The LAT will survey 40% of the sky with arc-minute resolution. These observations will measure (or limit) the sum of neutrino masses, search for light relics, measure the early behavior of Dark Energy, and refine our understanding of the intergalactic medium, clusters and the role of feedback in galaxy formation.
With up to ten times the sensitivity and five times the angular resolution of the Planck satellite, and roughly an order of magnitude increase in map** speed over currently operating ("Stage 3") experiments, SO will measure the CMB temperature and polarization fluctuations to exquisite precision in six frequency bands from 27 to 280 GHz. SO will rapidly advance CMB science while informing the design of future observatories such as CMB-S4.
△ Less
Submitted 16 July, 2019;
originally announced July 2019.
-
Anti-Zeno quantum advantage in fast-driven heat machines
Authors:
Victor Mukherjee,
Abraham G. Kofman,
Gershon Kurizki
Abstract:
Develo** quantum machines which can outperform their classical counterparts, thereby achieving quantum supremacy or quantum advantage, is a major aim of the current research on quantum thermodynamics and quantum technologies. Here we show that a fast-modulated cyclic quantum heat machine operating in the non-Markovian regime can lead to significant heat-current and power boosts induced by the an…
▽ More
Develo** quantum machines which can outperform their classical counterparts, thereby achieving quantum supremacy or quantum advantage, is a major aim of the current research on quantum thermodynamics and quantum technologies. Here we show that a fast-modulated cyclic quantum heat machine operating in the non-Markovian regime can lead to significant heat-current and power boosts induced by the anti-Zeno effect. Such boosts signify a quantum advantage over almost all heat-machines proposed thus far that operate in the conventional Markovian regime, where the quantumness of the system-bath interaction plays no role. The present effect owes its origin to the time-energy uncertainty relation in quantum mechanics, which may result in enhanced system-bath energy exchange for modulation periods shorter than the bath correlation-time.
△ Less
Submitted 14 January, 2020; v1 submitted 2 May, 2019;
originally announced May 2019.
-
Design and Bolometer Characterization of the SPT-3G First-year Focal Plane
Authors:
W. Everett,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. E. Austermann,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
J. E. Carlstrom,
F. W. Carter,
T. Cecil,
C. L. Chang,
J. F. Cliche,
A. Cukierman,
E. V. Denison,
T. de Haan,
J. Ding,
M. A. Dobbs,
D. Dutcher,
A. Foster,
R. N. Gannon,
A. Gilbert,
J. C. Groh,
N. W. Halverson
, et al. (51 additional authors not shown)
Abstract:
During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization…
▽ More
During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization pixels, read out using 68x frequency-domain multiplexing. Here we discuss design, assembly, and layout of the modules, as well as early performance characterization of the first-year array, including yield and detector properties.
△ Less
Submitted 25 February, 2019;
originally announced February 2019.
-
Year two instrument status of the SPT-3G cosmic microwave background receiver
Authors:
A. N. Bender,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
K. Aylor,
P. S. Barry,
R. Basu Thakur,
B. A. Benson,
L. S. Bleem,
S. Bocquet,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
H. -M. Cho,
J. F. Cliche,
T. M. Crawford,
A. Cukierman,
T. de Haan,
E. V. Denison,
J. Ding,
M. A. Dobbs,
S. Dodelson
, et al. (64 additional authors not shown)
Abstract:
The South Pole Telescope (SPT) is a millimeter-wavelength telescope designed for high-precision measurements of the cosmic microwave background (CMB). The SPT measures both the temperature and polarization of the CMB with a large aperture, resulting in high resolution maps sensitive to signals across a wide range of angular scales on the sky. With these data, the SPT has the potential to make a br…
▽ More
The South Pole Telescope (SPT) is a millimeter-wavelength telescope designed for high-precision measurements of the cosmic microwave background (CMB). The SPT measures both the temperature and polarization of the CMB with a large aperture, resulting in high resolution maps sensitive to signals across a wide range of angular scales on the sky. With these data, the SPT has the potential to make a broad range of cosmological measurements. These include constraining the effect of massive neutrinos on large-scale structure formation as well as cleaning galactic and cosmological foregrounds from CMB polarization data in future searches for inflationary gravitational waves. The SPT began observing in January 2017 with a new receiver (SPT-3G) containing $\sim$16,000 polarization-sensitive transition-edge sensor bolometers. Several key technology developments have enabled this large-format focal plane, including advances in detectors, readout electronics, and large millimeter-wavelength optics. We discuss the implementation of these technologies in the SPT-3G receiver as well as the challenges they presented. In late 2017 the implementations of all three of these technologies were modified to optimize total performance. Here, we present the current instrument status of the SPT-3G receiver.
△ Less
Submitted 31 August, 2018;
originally announced September 2018.
-
Characterization and performance of the second-year SPT-3G focal plane
Authors:
D. Dutcher,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
J. F. Cliche,
A. Cukierman,
T. de Haan,
J. Ding,
M. A. Dobbs,
W. Everett,
A. Foster,
J. Gallicchio,
A. Gilbert,
J. C. Groh,
S. T. Guns,
N. W. Halverson,
A. H. Harke-Hosemann
, et al. (46 additional authors not shown)
Abstract:
The third-generation instrument for the 10-meter South Pole Telescope, SPT-3G, was first installed in January 2017. In addition to completely new cryostats, secondary telescope optics, and readout electronics, the number of detectors in the focal plane has increased by an order of magnitude from previous instruments to ~16,000. The SPT-3G focal plane consists of ten detector modules, each with an…
▽ More
The third-generation instrument for the 10-meter South Pole Telescope, SPT-3G, was first installed in January 2017. In addition to completely new cryostats, secondary telescope optics, and readout electronics, the number of detectors in the focal plane has increased by an order of magnitude from previous instruments to ~16,000. The SPT-3G focal plane consists of ten detector modules, each with an array of 269 trichroic, polarization-sensitive pixels on a six-inch silicon wafer. Within each pixel is a broadband, dual-polarization sinuous antenna; the signal from each orthogonal linear polarization is divided into three frequency bands centered at 95, 150, and 220 GHz by in-line lumped element filters and transmitted via superconducting microstrip to Ti/Au transition-edge sensor (TES) bolometers. Properties of the TES film, microstrip filters, and bolometer island must be tightly controlled to achieve optimal performance. For the second year of SPT-3G operation, we have replaced all ten wafers in the focal plane with new detector arrays tuned to increase map** speed and improve overall performance. Here we discuss the TES superconducting transition temperature and normal resistance, detector saturation power, bandpasses, optical efficiency, and full array yield for the 2018 focal plane.
△ Less
Submitted 31 August, 2018;
originally announced September 2018.
-
Design and characterization of the SPT-3G receiver
Authors:
J. A. Sobrin,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
J. F. Cliche,
A. Cukierman,
T. de Haan,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
A. Foster,
J. Gallichio,
A. Gilbert,
J. C. Groh,
S. T. Guns,
N. W. Halverson
, et al. (46 additional authors not shown)
Abstract:
The SPT-3G receiver was commissioned in early 2017 on the 10-meter South Pole Telescope (SPT) to map anisotropies in the cosmic microwave background (CMB). New optics, detector, and readout technologies have yielded a multichroic, high-resolution, low-noise camera with impressive throughput and sensitivity, offering the potential to improve our understanding of inflationary physics, astroparticle…
▽ More
The SPT-3G receiver was commissioned in early 2017 on the 10-meter South Pole Telescope (SPT) to map anisotropies in the cosmic microwave background (CMB). New optics, detector, and readout technologies have yielded a multichroic, high-resolution, low-noise camera with impressive throughput and sensitivity, offering the potential to improve our understanding of inflationary physics, astroparticle physics, and growth of structure. We highlight several key features and design principles of the new receiver, and summarize its performance to date.
△ Less
Submitted 31 August, 2018;
originally announced September 2018.
-
Broadband anti-reflective coatings for cosmic microwave background experiments
Authors:
A. Nadolski,
A. M. Kofman,
J. D. Vieira,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
J. F. Cliche,
A. Cukierman,
T. de Haan,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
A. Foster,
J. Fu,
J. Gallicchio,
A. Gilbert
, et al. (49 additional authors not shown)
Abstract:
The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth comp…
▽ More
The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth compared to waveguide-coupled detectors. However, the increase in bandwidth comes at a cost: the lenses (up to $\sim$700 mm diameter) and lenslets ($\sim$5 mm diameter, hemispherical lenses on the focal plane) used in these systems are made from high-refractive-index materials (such as silicon or amorphous aluminum oxide) that reflect nearly a third of the incident radiation. In order to maximize the faint CMB signal that reaches the detectors, the lenses and lenslets must be coated with an anti-reflective (AR) material. The AR coating must maximize radiation transmission in scientifically interesting bands and be cryogenically stable. Such a coating was developed for the third generation camera, SPT-3G, of the South Pole Telescope (SPT) experiment, but the materials and techniques used in the development are general to AR coatings for mm-wave optics. The three-layer polytetrafluoroethylene-based AR coating is broadband, inexpensive, and can be manufactured with simple tools. The coating is field tested; AR coated focal plane elements were deployed in the 2016-2017 austral summer and AR coated reimaging optics were deployed in 2017-2018.
△ Less
Submitted 31 August, 2018;
originally announced September 2018.
-
Optical Characterization of the SPT-3G Focal Plane
Authors:
Zhaodi Pan,
Peter Ade,
Zeeshan Ahmed,
Anderson Adam,
Jason Austermann,
Jessica Avva,
Ritoban Basu Thakur,
Bender Amy,
Bradford Benson,
John Carlstrom,
Faustin Carter,
Thomas Cecil,
Clarence Chang,
Jean-Francois Cliche,
Ariel Cukierman,
Edward Denison,
Tijmen de Haan,
Junjia Ding,
Matt Dobbs,
Daniel Dutcher,
Wendeline Everett,
Allen Foster,
Renae Gannon,
Adam Gilbert,
John Groh
, et al. (51 additional authors not shown)
Abstract:
The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lump…
▽ More
The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lumped element filters. Ten detector wafers populate the focal plane, which is coupled to the sky via a large-aperture optical system. Here we present the frequency band characterization with Fourier transform spectroscopy, measurements of optical time constants, beam properties, and optical and polarization efficiencies of the focal plane. The detectors have frequency bands consistent with our simulations, and have high average optical efficiency which is 86%, 77% and 66% for the 95, 150 and 220 GHz detectors. The time constants of the detectors are mostly between 0.5 ms and 5 ms. The beam is round with the correct size, and the polarization efficiency is more than 90% for most of the bolometers
△ Less
Submitted 8 May, 2018;
originally announced May 2018.
-
Design and performance of the antenna coupled lumped-element kinetic inductance detector
Authors:
P. S. Barry,
S. Doyle,
A. L. Hornsby,
A. Kofman,
E. Mayer,
Q. Y. Tang,
J. Vieira,
E. Shirokoff
Abstract:
Focal plane arrays consisting of low-noise, polarisation-sensitive detectors have made possible the pioneering advances in the study of the cosmic microwave background (CMB). To make further progress, the next generation of CMB experiments (e.g. CMB-S4) will require a substantial increase in the number of detectors compared to the current stage 3 instruments. Arrays of kinetic inductance detectors…
▽ More
Focal plane arrays consisting of low-noise, polarisation-sensitive detectors have made possible the pioneering advances in the study of the cosmic microwave background (CMB). To make further progress, the next generation of CMB experiments (e.g. CMB-S4) will require a substantial increase in the number of detectors compared to the current stage 3 instruments. Arrays of kinetic inductance detectors (KIDs) provide a possible path to realising such large format arrays owing to their intrinsic multiplexing advantage and relative cryogenic simplicity. In this proceedings, we report on the design of a novel variant of the traditional KID design; the antenna-coupled lumped-element KID. A polarisation sensitive twin-slot antenna placed behind an optimised hemispherical lens couples power onto a thin-film superconducting microstrip line. The power is then guided into the inductive section of an aluminium KID where it is absorbed and modifies both the resonant frequency and quality factor of the KID. We present the various aspects of the design and preliminary results from the first set of seven-element prototype arrays and compare to the expected modelled performance.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Fabrication of antenna-coupled KID array for Cosmic Microwave Background detection
Authors:
Q. Y. Tang,
P. S. Barry,
R. Basu Thakur,
A. Kofman,
J. Vieira,
E. Shirokoff
Abstract:
Kinetic Inductance Detectors (KIDs) have become an attractive alternative to traditional bolometers in the sub-mm and mm observing community due to their innate frequency multiplexing capabilities and simple lithographic processes. These advantages make KIDs a viable option for the $O(500,000)$ detectors needed for the upcoming Cosmic Microwave Background - Stage 4 (CMB-S4) experiment. We have fab…
▽ More
Kinetic Inductance Detectors (KIDs) have become an attractive alternative to traditional bolometers in the sub-mm and mm observing community due to their innate frequency multiplexing capabilities and simple lithographic processes. These advantages make KIDs a viable option for the $O(500,000)$ detectors needed for the upcoming Cosmic Microwave Background - Stage 4 (CMB-S4) experiment. We have fabricated antenna-coupled MKID array in the 150GHz band optimized for CMB detection. Our design uses a twin slot antenna coupled to inverted microstrip made from a superconducting Nb/Al bilayer and SiN$_x$, which is then coupled to an Al KID grown on high resistivity Si. We present the fabrication process and measurements of SiN$_x$ microstrip resonators.
△ Less
Submitted 30 October, 2017;
originally announced October 2017.
-
Quantum engine efficiency bound beyond the second law of thermodynamics
Authors:
Wolfgang Niedenzu,
Victor Mukherjee,
Arnab Ghosh,
Abraham G. Kofman,
Gershon Kurizki
Abstract:
According to the second law, the efficiency of cyclic heat engines is limited by the Carnot bound that is attained by engines that operate between two thermal baths under the reversibility condition whereby the total entropy does not increase. Quantum engines operating between a thermal and a squeezed-thermal bath have been shown to surpass this bound. Yet, their maximum efficiency cannot be deter…
▽ More
According to the second law, the efficiency of cyclic heat engines is limited by the Carnot bound that is attained by engines that operate between two thermal baths under the reversibility condition whereby the total entropy does not increase. Quantum engines operating between a thermal and a squeezed-thermal bath have been shown to surpass this bound. Yet, their maximum efficiency cannot be determined by the reversibility condition, which may yield an unachievable efficiency bound above unity. Here we identify the fraction of the exchanged energy between a quantum system and a bath that necessarily causes an entropy change and derive an inequality for this change. This inequality reveals an efficiency bound for quantum engines energised by a non-thermal bath. This bound does not imply reversibility, unless the two baths are thermal. It cannot be solely deduced from the laws of thermodynamics.
△ Less
Submitted 29 October, 2017; v1 submitted 8 March, 2017;
originally announced March 2017.
-
Speed and Efficiency Limits of Multilevel Incoherent Heat Engines
Authors:
Victor Mukherjee,
Wolfgang Niedenzu,
Abraham G. Kofman,
Gershon Kurizki
Abstract:
We present a comprehensive theory of heat engines (HE) based on a quantum-mechanical "working fluid" (WF) with periodically-modulated energy levels. The theory is valid for any periodicity of driving Hamiltonians that commute with themselves at all times and do not induce coherence in the WF. Continuous and stroke cycles arise in opposite limits of this theory, which encompasses hitherto unfamilia…
▽ More
We present a comprehensive theory of heat engines (HE) based on a quantum-mechanical "working fluid" (WF) with periodically-modulated energy levels. The theory is valid for any periodicity of driving Hamiltonians that commute with themselves at all times and do not induce coherence in the WF. Continuous and stroke cycles arise in opposite limits of this theory, which encompasses hitherto unfamiliar cycle forms, dubbed here hybrid cycles. The theory allows us to discover the speed, power and efficiency limits attainable by incoherently-operating multilevel HE depending on the cycle form and the dynamical regimes.
△ Less
Submitted 6 December, 2016; v1 submitted 28 July, 2016;
originally announced July 2016.
-
Anomalous time delays and quantum weak measurements in optical micro-resonators
Authors:
M. Asano,
K. Y. Bliokh,
Y. P. Bliokh,
A. G. Kofman,
R. Ikuta,
T. Yamamoto,
Y. S. Kivshar,
L. Yang,
N. Imoto,
S. K. Ozdemir,
F. Nori
Abstract:
We study inelastic resonant scattering of a Gaussian wave packet with the parameters close to a zero of the complex scattering coefficient. We demonstrate, both theoretically and experimentally, that such near-zero scattering can result in anomalously-large time delays and frequency shifts of the scattered wave packet. Furthermore, we reveal a close analogy of these anomalous shifts with the spati…
▽ More
We study inelastic resonant scattering of a Gaussian wave packet with the parameters close to a zero of the complex scattering coefficient. We demonstrate, both theoretically and experimentally, that such near-zero scattering can result in anomalously-large time delays and frequency shifts of the scattered wave packet. Furthermore, we reveal a close analogy of these anomalous shifts with the spatial and angular Goos-Hänchen optical beam shifts, which are amplified via quantum weak measurements. However, in contrast to other beam-shift and weak-measurement systems, we deal with a one-dimensional scalar wave without any intrinsic degrees of freedom. It is the non-Hermitian nature of the system that produces its rich and non-trivial behaviour. Our results are generic for any scattering problem, either quantum or classical. As an example, we consider the transmission of an optical pulse through a nano-fiber with a side-coupled toroidal micro-resonator. The zero of the transmission coefficient corresponds to the critical coupling conditions. Experimental measurements of the time delays near the critical-coupling parameters verify our weak-measurement theory and demonstrate amplification of the time delay from the typical inverse resonator linewidth scale to the pulse duration scale.
△ Less
Submitted 14 November, 2016; v1 submitted 27 June, 2016;
originally announced June 2016.
-
On the operation of machines powered by quantum non-thermal baths
Authors:
Wolfgang Niedenzu,
David Gelbwaser-Klimovsky,
Abraham G. Kofman,
Gershon Kurizki
Abstract:
Diverse models of engines energised by quantum-coherent, hence non-thermal, baths allow the engine efficiency to transgress the standard thermodynamic Carnot bound. These transgressions call for an elucidation of the underlying mechanisms. Here we show that non-thermal baths may impart not only heat, but also mechanical work to a machine. The Carnot bound is inapplicable to such a hybrid machine.…
▽ More
Diverse models of engines energised by quantum-coherent, hence non-thermal, baths allow the engine efficiency to transgress the standard thermodynamic Carnot bound. These transgressions call for an elucidation of the underlying mechanisms. Here we show that non-thermal baths may impart not only heat, but also mechanical work to a machine. The Carnot bound is inapplicable to such a hybrid machine. Intriguingly, it may exhibit dual action, concurrently as engine and refrigerator, with up to 100% efficiency. We conclude that even though a machine powered by a quantum bath may exhibit an unconventional performance, it still abides by the traditional principles of thermodynamics.
△ Less
Submitted 11 July, 2016; v1 submitted 26 August, 2015;
originally announced August 2015.
-
Photon trajectories, anomalous velocities, and weak measurements: A classical interpretation
Authors:
Konstantin Y. Bliokh,
Aleksandr Y. Bekshaev,
Abraham G. Kofman,
Franco Nori
Abstract:
Recently, Kocsis et al. reported the observation of "average trajectories of single photons" in a two-slit interference experiment [Science 332, 1170 (2011)]. This was possible by using the quantum weak-measurements method, which implies averaging over many events, i.e., in fact, a multi-photon limit of classical linear optics. We give a classical-optics interpretation to this experiment and other…
▽ More
Recently, Kocsis et al. reported the observation of "average trajectories of single photons" in a two-slit interference experiment [Science 332, 1170 (2011)]. This was possible by using the quantum weak-measurements method, which implies averaging over many events, i.e., in fact, a multi-photon limit of classical linear optics. We give a classical-optics interpretation to this experiment and other related problems. It appears that weak measurements of the local momentum of photons made by Kocsis et al. represent measurements of the Poynting vector in an optical field. We consider both the real and imaginary parts of the local momentum, and show that their measurements have been realized in classical optics using small probe particles. We also examine the appearance of "anomalous" values of the local momentum: either negative (backflow) or exceeding the wavenumber (superluminal propagation). These features appear to be closely related to vortices and evanescent waves. Finally, we revisit a number of older works and find examples of photon-trajectories and anomalous-momentum measurements in various optical experiments.
△ Less
Submitted 30 May, 2013; v1 submitted 3 April, 2013;
originally announced April 2013.
-
Connection-state approach to pre- and post-selected quantum measurements
Authors:
Abraham G. Kofman,
Sahin K. Ozdemir,
Franco Nori
Abstract:
We discuss the concept of connection states (or connection matrices) that describe posterior ensembles, post-selected according to the outcomes of a quantum measurement. Connection matrices allow one to obtain results of any weak and some non-weak pre- and post-selected measurements, in the same manner as density matrices allow one to predict the results of conventional quantum measurements. Conne…
▽ More
We discuss the concept of connection states (or connection matrices) that describe posterior ensembles, post-selected according to the outcomes of a quantum measurement. Connection matrices allow one to obtain results of any weak and some non-weak pre- and post-selected measurements, in the same manner as density matrices allow one to predict the results of conventional quantum measurements. Connection matrices are direct extensions of the density matrices and are generally non-Hermitian, which we show to be a direct consequence of quantum complementarity. This implies that the ultimate reason for unusual weak values is quantum complementarity. We show that connection matrices can be determined experimentally. We also show that retrodictive states are a special case of connection states. We propose a new method of tomography of quantum detectors.
△ Less
Submitted 31 July, 2013; v1 submitted 25 March, 2013;
originally announced March 2013.
-
Spectral Analysis and Identification of Noises in Quantum Systems
Authors:
Re-Bing Wu,
Tie-Fu Li,
A. G. Kofman,
**g Zhang,
Yu-xi Liu,
Yu. A. Pashkin,
Jaw-Shen Tsai,
Franco Nori
Abstract:
In quantum information processing, knowledge of the noise in the system is crucial for high-precision manipulation and tomography of coherent quantum operations. Existing strategies for identifying this noise require the use of additional quantum devices or control pulses. We present a noise-identification method directly based on the system's non-Markovian response of an ensemble measurement to t…
▽ More
In quantum information processing, knowledge of the noise in the system is crucial for high-precision manipulation and tomography of coherent quantum operations. Existing strategies for identifying this noise require the use of additional quantum devices or control pulses. We present a noise-identification method directly based on the system's non-Markovian response of an ensemble measurement to the noise. The noise spectrum is identified by reversing the response relationship in the frequency domain. For illustration, the method is applied to superconducting charge qubits, but it is equally applicable to any type of qubits. We find that the identification strategy recovers the well-known Fermi's golden rule under the lowest-order perturbation approximation, which corresponds to the Markovian limit when the measurement time is much longer than the noise correlation time. Beyond such approximation, it is possible to further improve the precision at the so-called optimal point by incorporating the transient response data in the non-Markovian regime. This method is verified with experimental data from coherent oscillations in a superconducting charge qubit.
△ Less
Submitted 25 November, 2012; v1 submitted 21 November, 2012;
originally announced November 2012.
-
Multiphoton electron detachment by a superposition of static and ac filds
Authors:
A. G. Kofman,
G. P. Berman
Abstract:
A theory of electron detachment from atoms or negative ions by a superposition of a static and a laser (or, more generally, ac) fields, parallel to each other, is developed in the case when the photon energy and the field amplitude are much less than the detachment energy and intra-ion field, respectively. Simple analytical results together with their validity conditions are obtained. Several qual…
▽ More
A theory of electron detachment from atoms or negative ions by a superposition of a static and a laser (or, more generally, ac) fields, parallel to each other, is developed in the case when the photon energy and the field amplitude are much less than the detachment energy and intra-ion field, respectively. Simple analytical results together with their validity conditions are obtained. Several qualitatively different regimes of detachment have been identified. Applications of the present theory to electron emission from metal and semiconductor surfaces and from photosynthetic bio-complexes are discussed.
△ Less
Submitted 29 October, 2012;
originally announced October 2012.
-
Quantum Zeno and anti-Zeno effects induced by either frequent measurements, modulations, or a mix of them
Authors:
Wenxian Zhang,
A. G. Kofman,
Jun Zhuang,
J. Q. You,
Franco Nori
Abstract:
Using numerical calculations, we compare the collective transition probabilities of many spins in random magnetic fields, subject to either frequent projective measurements, frequent phase modulations, or a mix of modulations and measurements. For three different distribution functions (Gaussian, Lorentzian, and exponential) we consider here, the transition probability under frequent modulations i…
▽ More
Using numerical calculations, we compare the collective transition probabilities of many spins in random magnetic fields, subject to either frequent projective measurements, frequent phase modulations, or a mix of modulations and measurements. For three different distribution functions (Gaussian, Lorentzian, and exponential) we consider here, the transition probability under frequent modulations is suppressed most if the pulse delay is short and the evolution time is larger than a critical value. Furthermore, decoherence freezing (with a transition rate equals to zero) occurs when there are frequent phase modulations, while the transition rate only decreases when there are frequent measurements and a mix of them, as the pulse delay approaches zero. In the large pulse-delay region, however, the transition probabilities under frequent modulations are enhanced more than those under either frequent measurements or a mix of modulations and measurements.
△ Less
Submitted 15 October, 2011;
originally announced October 2011.
-
Nonperturbative theory of weak pre- and post-selected measurements
Authors:
Abraham G. Kofman,
Sahel Ashhab,
Franco Nori
Abstract:
This paper starts with a brief review of the topic of strong and weak pre- and post-selected (PPS) quantum measurements, as well as weak values, and afterwards presents original work. In particular, we develop a nonperturbative theory of weak PPS measurements of an arbitrary system with an arbitrary meter, for arbitrary initial states. New and simple analytical formulas are obtained for the averag…
▽ More
This paper starts with a brief review of the topic of strong and weak pre- and post-selected (PPS) quantum measurements, as well as weak values, and afterwards presents original work. In particular, we develop a nonperturbative theory of weak PPS measurements of an arbitrary system with an arbitrary meter, for arbitrary initial states. New and simple analytical formulas are obtained for the average and the distribution of the meter pointer variable, which hold to all orders in the weak value. In the case of a mixed preselected state, in addition to the standard weak value, an associated weak value is required to describe weak PPS measurements. In the linear regime, the theory provides the generalized Aharonov-Albert-Vaidman formula. Moreover, we reveal two new regimes of weak PPS measurements: the strongly-nonlinear regime and the inverted region, where the system-dependent contribution to the pointer deflection decreases with increasing the measurement strength. The optimal conditions for weak PPS measurements are achieved in the strongly-nonlinear regime, where the magnitude of the average pointer deflection is equal or close to the maximum. This maximum is independent of the measurement strength, being typically of the order of the pointer uncertainty. We show that the amplification in the weak PPS measurements is a product of two qualitatively different quantities: proper amplification and enhancement. The effects of the free system and meter Hamiltonians are discussed. We also identify optimal meters for weak measurements. Exact solutions are obtained for a certain class of the measured observables. These solutions are used for numerical calculations, the results of which agree with the theory. Moreover, the theory is extended to allow for a completely general post-selection measurement. We also discuss time-symmetry properties of PPS measurements of any strength.
△ Less
Submitted 14 October, 2012; v1 submitted 28 September, 2011;
originally announced September 2011.
-
Quantum anti-Zeno effect without wave function reduction
Authors:
Qing Ai,
Dazhi Xu,
Su Yi,
A. G. Kofman,
C. P. Sun,
Franco Nori
Abstract:
We study the measurement-induced enhancement of the spontaneous decay (called quantum anti-Zeno effect) for a two-level subsystem, where measurements are treated as couplings between the excited state and an auxiliary state rather than the von Neumann's wave function reduction. The photon radiated in a fast decay of the atom, from the auxiliary state to the excited state, triggers a quasi-measurem…
▽ More
We study the measurement-induced enhancement of the spontaneous decay (called quantum anti-Zeno effect) for a two-level subsystem, where measurements are treated as couplings between the excited state and an auxiliary state rather than the von Neumann's wave function reduction. The photon radiated in a fast decay of the atom, from the auxiliary state to the excited state, triggers a quasi-measurement, as opposed to a projection measurement. Our use of the term "quasi-measurement" refers to a "coupling-based measurement". Such frequent quasi-measurements result in an exponential decay of the survival probability of atomic initial state with a photon emission following each quasi-measurement. Our calculations show that the effective decay rate is of the same form as the one based on projection measurements. What is more important, the survival probability of the atomic initial state which is obtained by tracing over all the photon states is equivalent to the survival probability of the atomic initial state with a photon emission following each quasi-measurement to the order under consideration. That is because the contributions from those states with photon number less than the number of quasi-measurements originate from higher-order processes.
△ Less
Submitted 27 July, 2010;
originally announced July 2010.