Showing 1–42 of 42 results for author: Knizhnik, A

Optimal model of semi-infinite graphene for ab initio calculations of reactions at graphene edges by the example of zigzag edge reconstruction

Authors: Yulia G. Polynskaya, Irina V. Lebedeva, Andrey A. Knizhnik, Andrey M. Popov

Abstract: We investigate how parameters of the model of semi-infinite graphene based on a graphene nanoribbon under periodic boundary conditions affect the accuracy of ab initio calculations of reactions at graphene edges by the example of the first stage of reconstruction of zigzag graphene edges, formation of a pentagon-heptagon pair. It is shown that to converge properly the results, the nanoribbon shoul… ▽ More We investigate how parameters of the model of semi-infinite graphene based on a graphene nanoribbon under periodic boundary conditions affect the accuracy of ab initio calculations of reactions at graphene edges by the example of the first stage of reconstruction of zigzag graphene edges, formation of a pentagon-heptagon pair. It is shown that to converge properly the results, the nanoribbon should consist of at least 6 zigzag rows and periodic images of the pair along the nanoribbon axis should be separated by at least 6 hexagons. The converged reaction energy and activation barrier for formation of an isolated pentagon-heptagon pair are found to be -0.15 eV and 1.61 eV, respectively. It is also revealed that such defects reduce the graphene edge magnetization only locally but ordering of spins at opposite nanoribbon edges switches from the antiparallel (antiferromagnetic) to parallel one (ferromagnetic) upon increasing the defect density. △ Less

Submitted 8 November, 2022; originally announced November 2022.

Comments: 19 pages, 7 figures

Journal ref: Computational and Theoretical Chemistry 1214, 113755 (2022)

Reconstruction of Zigzag Graphene Edges: Energetics, Kinetics and Residual Defects

Authors: Yulia G. Polynskaya, Irina V. Lebedeva, Andrey A. Knizhnik, Andrey M. Popov

Abstract: Ab initio calculations are performed to study consecutive reconstruction of a zigzag graphene edge. According to the obtained energy profile along the reaction pathway, the first reconstruction step, formation of the first pentagon-heptagon pair, is the slowest one, while the growth of an already nucleated reconstructed edge domain should occur steadily at a much higher rate. Domains merge into on… ▽ More Ab initio calculations are performed to study consecutive reconstruction of a zigzag graphene edge. According to the obtained energy profile along the reaction pathway, the first reconstruction step, formation of the first pentagon-heptagon pair, is the slowest one, while the growth of an already nucleated reconstructed edge domain should occur steadily at a much higher rate. Domains merge into one only in 1/4 of cases when they get in contact, while in the rest of the cases, residual defects are left. Structure, energy and magnetic properties of these defects are studied. It is found that spontaneous formation of pairs of residual defects (i.e. spontaneous domain nucleation) in the fully reconstructed edge is unlikely at temperatures below 1000 K. Using a kinetic model, we show that the average domain length is of several $\mathrmμ$m at room temperature and it decreases exponentially upon increasing the temperature at which the reconstruction takes place. △ Less

Submitted 4 November, 2022; originally announced November 2022.

Comments: 5 pages, 4 figures

Journal ref: J. Phys. Chem. Lett. 13, 10326 - 10330 (2022)

Atomic-scale defects restricting structural superlubricity: Ab initio study study on the example of the twisted graphene bilayer

Authors: Alexander S. Minkin, Irina V. Lebedeva, Andrey M. Popov, Andrey A. Knizhnik

Abstract: The potential energy surface (PES) of interlayer interaction of twisted bilayer graphene with vacancies in one of the layers is investigated via density functional theory (DFT) calculations with van der Waals corrections. These calculations give a non-negligible magnitude of PES corrugation of 28 meV per vacancy and barriers for relative sliding of the layers of 7 - 8 meV per vacancy for the moiré… ▽ More The potential energy surface (PES) of interlayer interaction of twisted bilayer graphene with vacancies in one of the layers is investigated via density functional theory (DFT) calculations with van der Waals corrections. These calculations give a non-negligible magnitude of PES corrugation of 28 meV per vacancy and barriers for relative sliding of the layers of 7 - 8 meV per vacancy for the moiré pattern with coprime indices (2,1) (twist angle 21.8$^\circ$). At the same time, using the semiempirical potential fitted to the DFT results, we confirm that twisted bilayer graphene without defects exhibits superlubricity for the same moiré pattern and the magnitude of PES corrugation for the infinite bilayer is below the calculation accuracy. Our results imply that atomic-scale defects restrict the superlubricity of 2D layers and can determine static and dynamic tribological properties of these layers in a superlubric state. We also analyze computationally cheap approaches that can be used for modeling of tribological behavior of large-scale systems with defects. The adequacy of using state-of-the-art semiempirical potentials for interlayer interaction and approximations based on the first spatial Fourier harmonics for the description of interaction between graphene layers with defects is discussed. △ Less

Submitted 30 September, 2021; v1 submitted 25 August, 2021; originally announced August 2021.

Comments: 11 pages, 4 figures

Journal ref: Phys. Rev. B 104, 075444 (2021)

Healing of a hole in a carbon nanotube under electron irradiation in HRTEM

Authors: Irina V. Lebedeva, Andrey M. Popov, Andrey A. Knizhnik

Abstract: Healing of a hole in a carbon nanotube under electron irradiation in HRTEM at room temperature is demonstrated using molecular dynamics simulations with the CompuTEM algorithm. Formation of an amorphous patch is observed in all simulation runs. The amorphous patch is formed in the absence of external carbon adatoms only via reconstruction of the carbon bond network. It consists mainly of 5-, 6- an… ▽ More Healing of a hole in a carbon nanotube under electron irradiation in HRTEM at room temperature is demonstrated using molecular dynamics simulations with the CompuTEM algorithm. Formation of an amorphous patch is observed in all simulation runs. The amorphous patch is formed in the absence of external carbon adatoms only via reconstruction of the carbon bond network. It consists mainly of 5-, 6- and 7-membered rings and causes a small bottleneck. In addition, further growth of the initial amorphous patch under electron irradiation takes place. Two-coordinated atoms are found to play a crucial role in the latter process, analogous to autocatalisys of rearrangements of rings in fullerenes. The principal rearrangements in the presence of two-coordinated atoms can be described as generalized sp-defect migration: a bond is broken between two three-coordinated atoms and one of them forms a new bond with a nearby two-coordinated atom. If the new and former two-coordinated atoms are not bonded, the reaction leads both to displacement of the sp defect and changes in rings of the sp$^2$ carbon structure. Migration by hop** of two-coordinated atoms and other reactions involving simultaneous breakage of two bonds are also detected but much rarely. Long-living two-coordinated atoms in the patch structure and related fast growth of the patch are observed in more than half of the simulation runs. Since the amorphous patch and bottleneck affect the electronic properties of the nanotube, such nanotubes can be perspective for nanoelectronic applications. △ Less

Submitted 23 March, 2021; originally announced March 2021.

Comments: 9 pages, 5 figures

Journal ref: J. Phys. Chem. C 125, 1523-1530 (2021)

Transformation of a graphene nanoribbon into a hybrid 1D nanoobject with alternating double chains and polycyclic regions

Authors: Alexander S. Sinitsa, Irina V. Lebedeva, Yulia G. Polynskaya, Dimas G. de Oteyza, Sergey V. Ratkevich, Andrey A. Knizhnik, Andrey M. Popov, Nikolai A. Poklonski, Yurii E. Lozovik

Abstract: Molecular dynamics simulations show that a graphene nanoribbon with alternating regions which are one and three hexagons wide can transform into a hybrid 1D nanoobject with alternating double chains and polycyclic regions under electron irradiation in HRTEM. A scheme of synthesis of such a nanoribbon using Ullmann coupling and dehydrogenation reactions is proposed. The reactive REBO-1990EVC potent… ▽ More Molecular dynamics simulations show that a graphene nanoribbon with alternating regions which are one and three hexagons wide can transform into a hybrid 1D nanoobject with alternating double chains and polycyclic regions under electron irradiation in HRTEM. A scheme of synthesis of such a nanoribbon using Ullmann coupling and dehydrogenation reactions is proposed. The reactive REBO-1990EVC potential is adapted for simulations of carbon-hydrogen systems and is used in combination with the CompuTEM algorithm for modeling of electron irradiation effects. The atomistic mechanism of formation of the new hybrid 1D nanoobject is found to be the following. Firstly hydrogen is removed by electron impacts. Then spontaneous breaking of bonds between carbon atoms leads to decomposition of narrow regions of the graphene nanoribbon into double chains. Simultaneously thermally activated growth of polycyclic regions occurs. Density functional theory calculations give barriers along the growth path of polycyclic regions consistent with this mechanism. Electronic properties of the new 1D nanoobject are shown to be strongly affected by the edge magnetism and make this nanostructure promising nanoelectronic and spintronic applications. The way of synthesis the 1D nanoobject proposed here can be considered as an example of the general three-stage strategy of production of nanoobjects and macromolecules. 1) precursors are synthesized by traditional chemical method, 2) precursors are placed in HRTEM with the electron energy that is sufficient only to remove hydrogen atoms, 3) as a result of hydrogen removal, the precursors become unstable or metastable and transform into new nanoobjects or macromolecules. △ Less

Submitted 13 January, 2021; originally announced January 2021.

Comments: 17 pages, 10 figures in the paper; 5 pages and 3 figures in the supplementary information

Journal ref: Phys. Chem. Chem. Phys. 23, 425-441 (2021)

Molecular Dynamics Study of sp-Defect Migration in Odd Fullerene: Possible Role in Synthesis of Abundant Isomers of Fullerenes

Authors: Alexander S. Sinitsa, Irina V. Lebedeva, Yulia G. Polynskaya, Andrey M. Popov, Andrey A. Knizhnik

Abstract: To explain recent experiment showing the role of odd fullerenes in formation of abundant fullerene isomers a reactive molecular dynamics (MD) study has been performed. Three types of bond rearrangement reactions are found by MD simulations at 3000 K in odd fullerenes which contain an extra sp atom among all other sp$^2$ atoms. The first type is sto-chastic sp-defect migration analogous to exchange… ▽ More To explain recent experiment showing the role of odd fullerenes in formation of abundant fullerene isomers a reactive molecular dynamics (MD) study has been performed. Three types of bond rearrangement reactions are found by MD simulations at 3000 K in odd fullerenes which contain an extra sp atom among all other sp$^2$ atoms. The first type is sto-chastic sp-defect migration analogous to exchange mechanism of adatom migration on a surface. The second type cor-responds to changes in the ring configuration of the sp$^2$-structure assisted by the sp atom which can lead to annealing of seven-membered rings or separation of five-membered rings. The third type is formation of short-living one-coordinated atoms or two additional sp atoms. Annihilation of a pair of sp defects has been also observed in the MD simulations. It is shown that the frequency of sp-defect migration at a lower temperature, as estimated from performed density functional theory calculations of the barriers of sp-defect migration events, is sufficient to deliver the sp atom to defects of sp$^2$ structure during the fullerene formation time. Based on these results, we propose to supplement the self-organization paradigm of fullerene formation by the following four-stage atomistic mechanism of formation of abundant isomers of fullerenes: 1) attachment of single carbon atoms, 2) sp-defect migration to sp$^2$-structure defects, 3) sp$^2$-defect annealing assisted by the sp atom and 4) subsequent annihilation of pairs of sp defects. △ Less

Submitted 22 December, 2020; originally announced December 2020.

Comments: 12 pages and 4 figures in the paper; 7 pages and 4 figures in the supporting information

Journal ref: J. Phys. Chem. C 124, 11652-11661 (2020)

Universal description of potential energy surface of interlayer interaction in two-dimensional materials by first spatial Fourier harmonics

Authors: Alexander V. Lebedev, Irina V. Lebedeva, Andrey M. Popov, Andrey A. Knizhnik, Nikolai A. Poklonski, Sergey A. Vyrko

Abstract: We propose a hypothesis that the potential energy surface (PES) of interlayer interaction in diverse 2D materials can be universally described by the first spatial Fourier harmonics. This statement (checked previously for the interactions between graphene and hexagonal boron nitride layers in different combinations) is verified in the present paper for the case of hydrofluorinated graphene (HFG) b… ▽ More We propose a hypothesis that the potential energy surface (PES) of interlayer interaction in diverse 2D materials can be universally described by the first spatial Fourier harmonics. This statement (checked previously for the interactions between graphene and hexagonal boron nitride layers in different combinations) is verified in the present paper for the case of hydrofluorinated graphene (HFG) bilayer with hydrogen bonding between fluorine and hydrogen at the interlayer interface. The PES for HFG bilayer is obtained through density functional theory calculations with van der Waals corrections. An analytical expression based on the first Fourier harmonics describing the PES which corresponds to the symmetry of HFG layers is derived. It is found that the calculated PES can be described by the first Fourier harmonics with the accuracy of 3\% relative to the PES corrugation. The shear mode frequency, shear modulus and barrier for relative rotation of the layers to incommensurate states of HFG bilayer are estimated. Additionally it is shown that HFG bilayer is stable relative to the formation of HF molecules as a result of chemical reactions between the layers. △ Less

Submitted 22 July, 2020; originally announced July 2020.

Comments: 12 pages, 3 figures

Journal ref: Physical Review B 102, 045418 (2020)

Muiltiscale modeling of electrical conductivity of R-BAPB polyimide + carbon nanotubes nanocomposites

Authors: S. V. Larin, S. V. Lyulin, P. A. Likhomanova, K. Yu. Khromov, A. A. Knizhnik, B. V. Potapkin

Abstract: The electrical conductivity of the polyimide R-BAPB polymer filled with single-wall carbon nanotubes (CNT) with chirality (5,5) is modeled using a multi-scale approach. The modeling starts with molecular dynamics simulations of time-dependent fluctuating atomic configurations of polymer filled CNTs junctions. Then the atomic positions obtained in the first step are used to perform fully first-prin… ▽ More The electrical conductivity of the polyimide R-BAPB polymer filled with single-wall carbon nanotubes (CNT) with chirality (5,5) is modeled using a multi-scale approach. The modeling starts with molecular dynamics simulations of time-dependent fluctuating atomic configurations of polymer filled CNTs junctions. Then the atomic positions obtained in the first step are used to perform fully first-principles microscopic calculations of the CNTs junctions contact resistances using the Green's function based quantum transport technique. And finally, those contact resistances are supplied as an input to a statistical calculation of a CNTs ensemble conductivity using a Monte Carlo percolation model. The results of the first-principles calculations show a very strong dependence of the polymer filled CNTs junctions contact resistance on the geometry of CNTs junctions, including an angle $\varphi$ between nanotubes axes and the positions of polymer atoms around CNTs. Incorporating into the percolation model this strong dependence as well as CNTs agglomeration, pushed the calculated values of electrical conductivity just above the percolation threshold below 0.01 S/m, which is within the experimental range for composites with various base polymers. Possible mechanisms for further reduction of composites conductivity are discussed. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Comments: 12 pages, 9 figures

Journal ref: Phys. Rev. Materials 5, 066002 (2021)

Elastic constants of graphene: Comparison of empirical potentials and DFT calculations

Authors: Irina V. Lebedeva, Alexander S. Minkin, Andrey M. Popov, Andrey A. Knizhnik

Abstract: The capacity of popular classical interatomic potentials to describe elastic properties of graphene is tested. The Tersoff potential, Brenner reactive bond-order potentials REBO-1990, REBO-2000, REBO-2002 and AIREBO as well as LCBOP, PPBE-G, ReaxFF-CHO and ReaxFF-C2013 are considered. Linear and non-linear elastic response of graphene under uniaxial stretching is investigated by static energy calc… ▽ More The capacity of popular classical interatomic potentials to describe elastic properties of graphene is tested. The Tersoff potential, Brenner reactive bond-order potentials REBO-1990, REBO-2000, REBO-2002 and AIREBO as well as LCBOP, PPBE-G, ReaxFF-CHO and ReaxFF-C2013 are considered. Linear and non-linear elastic response of graphene under uniaxial stretching is investigated by static energy calculations. The Young's modulus, Poisson's ratio and high-order elastic moduli are verified against the reference data available from experimental measurements and ab initio studies. The density functional theory calculations are performed to complement the reference data on the effective Young's modulus and Poisson's ratio at small but finite elongations. It is observed that for all the potentials considered, the elastic energy deviates remarkably from the simple quadratic dependence already at elongations of several percent. Nevertheless, LCBOP provides the results consistent with the reference data and thus realistically describes in-plane deformations of graphene. Reasonable agreement is also observed for the computationally cheap PPBE-G potential. REBO-2000, AIREBO and REBO-2002 give a strongly non-linear elastic response with a wrong sign of the third-order elastic modulus and the corresponding results are very far from the reference data. The ReaxFF potentials drastically overestimate the Poisson's ratio. Furthermore, ReaxFF-C2013 shows a number of numerical artefacts at finite elongations. The bending rigidity of graphene is also obtained by static energy calculations for large-diameter carbon nanotubes. The best agreement with the experimental and ab initio data in this case is achieved using the REBO-2000, REBO-2002 and ReaxFF potentials. Therefore, none of the considered potentials adequately describes both in-plane and out-of-plane deformations of graphene. △ Less

Submitted 13 February, 2019; originally announced February 2019.

Comments: 17 pages, 2 figures

Journal ref: Physica E: Low-dimensional Systems and Nanostructures, 108, 326-338 (2019)

Long triple carbon chains formation by heat treatment of graphene nanoribbon: Molecular dynamics study with revised Brenner potential

Authors: Alexander S. Sinitsa, Irina V. Lebedeva, Andrey M. Popov, Andrey A. Knizhnik

Abstract: The method for production of atomic chains by heating of graphene nanoribbons (GNRs) is proposed and studied by molecular dynamics simulations. The Brenner potential is revised to adequately describe formation of atomic chains, edges and vacancy migration in graphene. A fundamentally different behavior is observed for zigzag-edge GNRs with 3 and 4 atomic rows (3 and 4-ZGNRs) at 2500 K: formation o… ▽ More The method for production of atomic chains by heating of graphene nanoribbons (GNRs) is proposed and studied by molecular dynamics simulations. The Brenner potential is revised to adequately describe formation of atomic chains, edges and vacancy migration in graphene. A fundamentally different behavior is observed for zigzag-edge GNRs with 3 and 4 atomic rows (3 and 4-ZGNRs) at 2500 K: formation of triple, double and single carbon chains with the length of hundreds of atoms in 3-ZGNRs and edge reconstruction with only short chains and GNR width reduction in 4-ZGNRs. The chain formation mechanism in 3-ZGNRs is revealed by analysis of bond reorganization reactions and is based on the interplay of two processes. The first one is breaking of bonds between 3 zigzag atomic rows leading to triple chain formation. The second one is bond breaking within the same zigzag atomic row, which occurs predominantly through generation of pentagons with subsequent bond breaking in pentagons and results in single or double chain formation. The DFT calculations of the barriers for relevant reactions are consistent with the mechanism proposed. The possibility of chain-based nanoelectronic devices with a controllable number of chains is discussed. △ Less

Submitted 6 October, 2018; v1 submitted 14 August, 2018; originally announced August 2018.

Comments: 43 pages, 9 figures

Journal ref: Carbon 140, 543-556 (2018)

Structure and energetics of carbon, hexagonal boron nitride and carbon/hexagonal boron nitride single-layer and bilayer nanoscrolls

Authors: Andrei I. Siahlo, Nikolai A. Poklonski, Alexander V. Lebedev, Irina V. Lebedeva, Andrey M. Popov, Sergey A. Vyrko, Andrey A. Knizhnik, Yurii E. Lozovik

Abstract: Single-layer and bilayer carbon and hexagonal boron nitride nanoscrolls as well as nanoscrolls made of bilayer graphene/hexagonal boron nitride heterostructure are considered. Structures of stable states of the corresponding nanoscrolls prepared by rolling single-layer and bilayer rectangular nanoribbons are obtained based on the analytical model and numerical calculations. The lengths of nanoribb… ▽ More Single-layer and bilayer carbon and hexagonal boron nitride nanoscrolls as well as nanoscrolls made of bilayer graphene/hexagonal boron nitride heterostructure are considered. Structures of stable states of the corresponding nanoscrolls prepared by rolling single-layer and bilayer rectangular nanoribbons are obtained based on the analytical model and numerical calculations. The lengths of nanoribbons for which stable and energetically favorable nanoscrolls are possible are determined. Barriers to rolling of single-layer and bilayer nanoribbons into nanoscrolls and barriers to nanoscroll unrolling are calculated. Based on the calculated barriers nanoscroll lifetimes in the stable state are estimated. Elastic constants for bending of graphene and hexagonal boron nitride layers used in the model are found by density functional theory calculations. △ Less

Submitted 6 April, 2018; originally announced April 2018.

Comments: 9 pages, 6 figures

Journal ref: Phys. Rev. Materials 2, 036001 (2018)

Stacking in incommensurate graphene/hexagonal-boron-nitride heterostructures based on ab initio study of interlayer interaction

Authors: Alexander V. Lebedev, Irina V. Lebedeva, Andrey M. Popov, Andrey A. Knizhnik

Abstract: The interlayer interaction in graphene/boron-nitride heterostructures is studied using density functional theory calculations with the correction for van der Waals interactions. It is shown that the use of the experimental interlayer distance allows to describe the potential energy surface at the level of more accurate but expensive computational methods. On the other hand, it is also demonstrated… ▽ More The interlayer interaction in graphene/boron-nitride heterostructures is studied using density functional theory calculations with the correction for van der Waals interactions. It is shown that the use of the experimental interlayer distance allows to describe the potential energy surface at the level of more accurate but expensive computational methods. On the other hand, it is also demonstrated that the dependence of the interlayer interaction energy on the relative in-plane position of the layers can be fitted with high accuracy by a simple expression determined by the system symmetry. The use of only two independent parameters in such an approximation suggests that various physical properties of flat graphene/boron-nitride systems are interrelated and can be expressed through these two parameters. Here we estimate some of the corresponding physical properties that can be accessed experimentally, including the correction to the period of the Moiré superstructure for the highly incommensurate ground state of graphene/boron-nitride bilayer coming from the interlayer interaction, width of stacking dislocations in slightly incommensurate systems of boron nitride on stretched graphene and shear mode frequencies for commensurate graphene/boron-nitride systems, such as a flake on a layer. We propose that the commensurate-incommensurate phase transition can be observed in boron nitride on stretched graphene and experimental measurements of the corresponding critical strain can be also used to get an insight into graphene/boron-nitride interactions. △ Less

Submitted 29 August, 2017; originally announced August 2017.

Comments: 15 pages, 4 figures

Journal ref: Phys. Rev. B 96, 085432 (2017)

Transformation of amorphous carbon clusters to fullerenes

Authors: Alexander S. Sinitsa, Irina V. Lebedeva, Andrey M. Popov, Andrey A. Knizhnik

Abstract: Transformation of amorphous carbon clusters into fullerenes under high temperature is studied using molecular dynamics simulations at microsecond times. Based on the analysis of both structure and energy of the system, it is found that fullerene formation occurs in two stages. Firstly, fast transformation of the initial amorphous structure into a hollow sp$^2$ shell with a few chains attached occu… ▽ More Transformation of amorphous carbon clusters into fullerenes under high temperature is studied using molecular dynamics simulations at microsecond times. Based on the analysis of both structure and energy of the system, it is found that fullerene formation occurs in two stages. Firstly, fast transformation of the initial amorphous structure into a hollow sp$^2$ shell with a few chains attached occurs with a considerable decrease of the potential energy and the number of atoms belonging to chains and to the amorphous domain. Then, insertion of remaining carbon chains into the sp$^2$ network takes place at the same time with the fullerene shell formation. Two types of defects remaining after the formation of the fullerene shell are revealed: 7-membered rings and single one-coordinated atoms. One of the fullerene structures obtained contains no defects at all, which demonstrates that defect-free carbon cages can be occasionally formed from amorphous precursors directly without defect healing. No structural changes are observed after the fullerene formation, suggesting that defect healing is a slow process in comparison with the fullerene shell formation. The schemes of the revealed reactions of chain atoms insertion into the fullerene shell just before its completion are presented. The results of the performed simulations are summarized within the paradigm of fullerene formation due to selforganization of the carbon system. △ Less

Submitted 4 August, 2017; originally announced August 2017.

Comments: 35 pages, 9 figures

Journal ref: J. Phys. Chem. C 121, 13396-13404 (2017)

Formation of nickel clusters wrapped in carbon cages: towards new endohedral metallofullerene synthesis

Authors: Alexander S. Sinitsa, Thomas W. Chamberlain, Thilo Zoberbier, Irina V. Lebedeva, Andrey M. Popov, Andrey A. Knizhnik, Robert L. McSweeney, Johannes Biskupek, Ute Kaiser, Andrei N. Khlobystov

Abstract: In spite of the high potential of endohedral metallofullerenes (EMFs) for application in biology, medicine and molecular electronics and recent efforts in EMF synthesis, the variety of EMFs accessible by conventional synthetic methods remains limited and does not include, for example, EMFs of late transition metals. We propose a method in which EMF formation is initiated by electron irradiation in… ▽ More In spite of the high potential of endohedral metallofullerenes (EMFs) for application in biology, medicine and molecular electronics and recent efforts in EMF synthesis, the variety of EMFs accessible by conventional synthetic methods remains limited and does not include, for example, EMFs of late transition metals. We propose a method in which EMF formation is initiated by electron irradiation in aberration-corrected high-resolution transmission electron spectroscopy (AC-HRTEM) of a metal cluster surrounded by amorphous carbon inside a carbon nanotube serving as a nano-reactor and apply this method for synthesis of nickel EMFs. The use of ACHRTEM makes it possible not only to synthesize new, previously unattainable nanoobjects but also to study in situ the mechanism of structural transformations. Molecular dynamics simulations using the state-of-the-art approach for modeling the effect of electron irradiation are performed to rationalise the experimental observations and to link the observed processes with conditions of bulk EMF synthesis. △ Less

Submitted 4 August, 2017; originally announced August 2017.

Comments: 26 pages, 9 figures

Journal ref: Nano Lett. 17, 1082-1089 (2017)

Edge stacking dislocations in two-dimensional bilayers with a small lattice mismatch

Authors: Irina V. Lebedeva, Andrey A. Knizhnik, Andrey M. Popov

Abstract: Incomplete stacking dislocations are predicted to form at edges of the shorter upper layer in two-dimensional hexagonal bilayers upon stretching the longer bottom layer. A concept of the edge Burgers vector is introduced to describe such dislocations by analogy with the Burgers vector of standard bulk dislocations. Analytical solutions for the structure and energy of edge stacking dislocations in… ▽ More Incomplete stacking dislocations are predicted to form at edges of the shorter upper layer in two-dimensional hexagonal bilayers upon stretching the longer bottom layer. A concept of the edge Burgers vector is introduced to describe such dislocations by analogy with the Burgers vector of standard bulk dislocations. Analytical solutions for the structure and energy of edge stacking dislocations in bilayer graphene are obtained depending on the magnitude of elongation and angles between the edge Burgers vector, direction of elongation and edge. The barrier for penetration of stacking dislocations inside the bilayer is estimated. The possibilities to measure the barrier to relative motion of graphene layers and strain of graphene on a substrate by observation of edge stacking dislocations are discussed. △ Less

Submitted 4 August, 2017; originally announced August 2017.

Comments: 8 pages, 6 figures

Journal ref: Physica E 90, 49-54 (2017)

Comparison of performance of van der Waals-corrected exchange-correlation functionals for interlayer interaction in graphene and hexagonal boron nitride

Authors: Irina V. Lebedeva, Alexander V. Lebedev, Andrey M. Popov, Andrey A. Knizhnik

Abstract: Exchange-correlation functionals with corrections for van der Waals interactions (PBE-D2, PBE-D3, PBE-D3(BJ), PBE-TS, optPBE-vdW and vdW-DF2) are tested for graphene and hexagonal boron nitride, both in the form of bulk and bilayer. The characteristics of the potential energy surface, such as the barrier to relative sliding of the layers and magnitude of corrugation, and physically measurable prop… ▽ More Exchange-correlation functionals with corrections for van der Waals interactions (PBE-D2, PBE-D3, PBE-D3(BJ), PBE-TS, optPBE-vdW and vdW-DF2) are tested for graphene and hexagonal boron nitride, both in the form of bulk and bilayer. The characteristics of the potential energy surface, such as the barrier to relative sliding of the layers and magnitude of corrugation, and physically measurable properties associated with relative in-plane and out-of-plane motion of the layers including the shear modulus and modulus for axial compression, shear mode frequency and frequency of out-of-plane vibrations are considered. The PBE-D3(BJ) functional gives the best results for the stackings of hexagonal boron nitride and graphite that are known to be ground-state from the experimental studies. However, it fails to describe the order of metastable states of boron nitride in energy. The PBE-D3 and vdW-DF2 functionals, which reproduce this order correctly, are identified as the optimal choice for general studies. The vdW-DF2 functional is preferred for evaluation of the modulus for axial compression and frequency of out-of-plane vibrations, while the PBE-D3 functional is somewhat more accurate in calculations of the shear modulus and shear mode frequency. The best description of the latter properties, however, is achieved also using the vdW-DF2 functional combined with consideration of the experimental interlayer distance. In the specific case of graphene, the PBE-D2 functional works very well and can be further improved by adjustment of the parameters. △ Less

Submitted 21 August, 2018; v1 submitted 4 August, 2017; originally announced August 2017.

Comments: 22 pages, 4 figues

Journal ref: Computational Materials Science 128, 45-58 (2017)

Growth of AlGaN under the conditions of significant gallium evaporation: phase separation and enhanced lateral growth

Authors: I. O. Mayboroda, A. A. Knizhnik, Yu. V. Grishchenko, I. S. Ezubchenko, Maxim L. Zanaveskin, M. Yu. Presniakov, B. V. Potapkin, V. A. Ilyin

Abstract: Growth kinetics of AlGaN in NH3 MBE under significant Ga desorption was studied. It was found that the addition of gallium stimulates 2D growth and provides better morphology of films compared to pure AlN. The effect was experimentally observed at up to 98% desorption of the im**ing gallium. We found that, under the conditions of significant thermal desorption, larger amounts of gallium were ret… ▽ More Growth kinetics of AlGaN in NH3 MBE under significant Ga desorption was studied. It was found that the addition of gallium stimulates 2D growth and provides better morphology of films compared to pure AlN. The effect was experimentally observed at up to 98% desorption of the im**ing gallium. We found that, under the conditions of significant thermal desorption, larger amounts of gallium were retained at lateral boundaries of 3D surface features than at flat terraces because of the higher binding energy of Ga atoms at specific surface defects. The selective accumulation of gallium resulted in an increase in lateral growth component through the formation of the Ga-enriched AlGaN phase at boundaries of 3D surface features. We studied temperature dependence of AlGaN growth rate and developed a kinetic model analytically describing this dependence. As the model was in good agreement with the experimental data, we used it to estimate the increase in the binding energy of Ga atoms at surface defects compared to terrace surface cites using data on the Ga content in different AlGaN phases. We also applied first-principles calculations to the thermodynamic analysis of stable configurations on the AlN surface and then used these surface configurations to compare the binding energy of Ga atom at terraces and steps. Both first-principles calculations and analytical estimations of the experimental results gave similar values of difference in binding energies; this value is 0.3 eV. △ Less

Submitted 5 February, 2017; originally announced February 2017.

Comments: 19 pages, 10 figures

Dislocations in stacking and commensurate-incommensurate phase transition in bilayer graphene and hexagonal boron nitride

Authors: Irina V. Lebedeva, Alexander V. Lebedev, Andrey M. Popov, Andrey A. Knizhnik

Abstract: Dislocations corresponding to a change of stacking in two-dimensional hexagonal bilayers, graphene and boron nitride, and associated with boundaries between commensurate domains are investigated using the two-chain Frenkel-Kontorova model on top of ab initio calculations. Structural transformations of bilayers in which the bottom layer is stretched and the upper one is left to relax freely are con… ▽ More Dislocations corresponding to a change of stacking in two-dimensional hexagonal bilayers, graphene and boron nitride, and associated with boundaries between commensurate domains are investigated using the two-chain Frenkel-Kontorova model on top of ab initio calculations. Structural transformations of bilayers in which the bottom layer is stretched and the upper one is left to relax freely are considered for gradually increased elongation of the bottom layer. Formation energies of dislocations, dislocation width and orientation of the boundary between commensurate domains are analyzed depending on the magnitude and direction of elongation. The second-order phase transition from the commensurate phase to the incommensurate one with multiple dislocations is predicted to take place at some critical elongation. The order parameter for this transition corresponds to the density of dislocations, which grows continuously upon increasing the elongation of the bottom layer above the critical value. In graphene and metastable boron nitride with the layers aligned in the same direction, where elementary dislocations are partial, this transition, however, is preceded by formation of the first dislocation at the elongation smaller than the critical one. The phase diagrams including this intermediate state are plotted in coordinates of the magnitude and direction of elongation of the bottom layer. △ Less

Submitted 13 June, 2016; originally announced June 2016.

Comments: 15 pages, 9 figures

Journal ref: Phys. Rev. B 93, 235414 (2016)

Interlayer interaction and related properties of bilayer hexagonal boron nitride: ab initio study

Authors: Alexander V. Lebedev, Irina V. Lebedeva, Andrey A. Knizhnik, Andrey M. Popov

Abstract: Principal characteristics of interlayer interaction and relative motion of hexagonal boron nitride (h-BN) layers are investigated by the first-principles method taking into account van der Waals interactions. Dependences of the interlayer interaction energy on relative translational displacement of h-BN layers (potential energy surfaces) are calculated for two relative orientations of the layers,… ▽ More Principal characteristics of interlayer interaction and relative motion of hexagonal boron nitride (h-BN) layers are investigated by the first-principles method taking into account van der Waals interactions. Dependences of the interlayer interaction energy on relative translational displacement of h-BN layers (potential energy surfaces) are calculated for two relative orientations of the layers, namely, for the layers aligned in the same direction and in the opposite directions upon relative rotation of the layers by 180 degrees. It is shown that the potential energy surfaces of bilayer h-BN can be approximated by the first Fourier components determined by symmetry. As a result, a wide set of physical qualintities describing relative motion of h-BN layers aligned in the same direction including barriers to their relative sliding and rotation, shear mode frequency and shear modulus are determined by a single parameter corresponding to the roughness of the potential energy surface, similar to bilayer graphene. The properties of h-BN layers aligned in the opposite directions are described by two such parameters. The possibility of partial and full dislocations in stacking of the layers is predicted for h-BN layers aligned in the same and opposite directions, respectively. The extended two-chain Frenkel-Kontorova model is used to estimate the width and formation energy of these dislocations on the basis of the calculated potential energy surfaces. △ Less

Submitted 11 April, 2016; v1 submitted 29 February, 2016; originally announced February 2016.

Comments: 13 pages, 6 figures

Journal ref: RSC Adv. 6, 6423-6435 (2016)

Atomistic mechanism of carbon nanotube cutting catalyzed by nickel under the electron beam

Authors: Irina V. Lebedeva, Thomas W. Chamberlain, Andrey M. Popov, Andrey A. Knizhnik, Thilo Zoberbier, Johannes Biskupek, Ute Kaiser, Andrei N. Khlobystov

Abstract: The cutting of single-walled carbon nanotubes by an 80 keV electron beam catalyzed by nickel clusters is imaged in situ using aberration-corrected high-resolution transmission electron microscopy. Extensive molecular dynamics simulations within the CompuTEM approach provide insight into the mechanism of this process and demonstrate that the combination of irradiation and nickel catalyst is crucial… ▽ More The cutting of single-walled carbon nanotubes by an 80 keV electron beam catalyzed by nickel clusters is imaged in situ using aberration-corrected high-resolution transmission electron microscopy. Extensive molecular dynamics simulations within the CompuTEM approach provide insight into the mechanism of this process and demonstrate that the combination of irradiation and nickel catalyst is crucial for the cutting process to take place. The atomistic mechanism of cutting is revealed by detailed analysis of irradiation-induced reactions of bonds reorganization and atom ejection in the vicinity of the nickel cluster, showing a highly complex interplay of different chemical transformations catalysed by the metal cluster. One of the most prevalent pathways includes three consecutive stages: formation of polyyne carbon chains from carbon nanotube, dissociation of the carbon chains into single and pairs of adatoms adsorbed on the nickel cluster, and ejection of these adatoms leading to the cutting of nanotube. Significant variations in the atom ejection rate are discovered depending on the process stage and nanotube diameter. The revealed mechanism and kinetic characteristics of cutting process provide fundamental knowledge for the development of new methodologies for control and manipulation of carbon structures at the nanoscale. △ Less

Submitted 21 November, 2014; originally announced November 2014.

Comments: 34 pages, 7 figures

Journal ref: Nanoscale 6, 14877-14890 (2014)

Force and magnetic field sensor based on measurement of tunneling conductance between ends of coaxial carbon nanotubes

Authors: A. M. Popov, I. V. Lebedeva, A. A. Knizhnik, Yu. E. Lozovik, N. A. Poklonski, A. I. Siahlo, S. A. Vyrko, S. V. Ratkevich

Abstract: The interaction and tunneling conductance between oppositely located ends of coaxial carbon nanotubes are studied by the example of two (11,11) nanotubes with open ends terminated by hydrogen atoms. The Green function formalism is applied to determine the tunneling current through the nanotube ends as a function of the distance between the ends, relative orientation of the nanotubes and voltage ap… ▽ More The interaction and tunneling conductance between oppositely located ends of coaxial carbon nanotubes are studied by the example of two (11,11) nanotubes with open ends terminated by hydrogen atoms. The Green function formalism is applied to determine the tunneling current through the nanotube ends as a function of the distance between the ends, relative orientation of the nanotubes and voltage applied. The energy favorable configuration of the coaxial nanotubes is obtained by the analysis of their interaction energy at different distances between the nanotube ends and angles of their relative rotation. Using these calculations, a general scheme of the force sensor based on the interaction between ends of coaxial nanotubes is proposed and the relation between the tunneling conductance and measured force is established for the considered nanotubes. The operational characteristics of this device as a magnetic field sensor based on measurements of the magnetic force acting on the coaxial nanotubes filled with magnetic endofullerenes are estimated. △ Less

Submitted 13 June, 2014; originally announced June 2014.

Comments: 9 pages, 8 figures

Journal ref: Comput. Mater. Sci. 92 (2014) 84-91

Formation of nickel-carbon heterofullerenes under electron irradiation

Authors: Alexander S. Sinitsa, Irina V. Lebedeva, Andrey A. Knizhnik, Andrey M. Popov, Stephen T. Skowron, Elena Bichoutskaia

Abstract: A way to produce new metal-carbon nanoobjects by transformation of a graphene flake with an attached transition metal cluster under electron irradiation is proposed. The transformation process is investigated by molecular dynamics simulations by the example of a graphene flake with a nickel cluster. The parameters of the nickel-carbon potential (I. V. Lebedeva et al. J. Phys. Chem. C, 2012, 116, 6… ▽ More A way to produce new metal-carbon nanoobjects by transformation of a graphene flake with an attached transition metal cluster under electron irradiation is proposed. The transformation process is investigated by molecular dynamics simulations by the example of a graphene flake with a nickel cluster. The parameters of the nickel-carbon potential (I. V. Lebedeva et al. J. Phys. Chem. C, 2012, 116, 6572) are modified to improve description of the balance between the fullerene elastic energy and graphene edge energies in this process. The metal-carbon nanoobjects formed are found to range from heterofullerenes with a metal patch to particles consisting of closed fullerene and metal clusters linked by chemical bonds. The atomic-scale transformation mechanism is revealed by the local structure analysis. The average time of formation of nanoobjects and their lifetime under electron irradiation are estimated for experimental conditions of high-resolution transmission electron microscope (HRTEM). The sequence of images of nanostructure evolution with time during its observation by HRTEM is also modelled. Furthermore, the possibility of batch production of studied metal-carbon nanoobjects and solids based on these nanoobjects is discussed. △ Less

Submitted 10 October, 2018; v1 submitted 21 May, 2014; originally announced May 2014.

Comments: 17 pages, 6 figures

Journal ref: Dalton Transactions 43, 7499-7513 (2014)

AA stacking, tribological and electronic properties of double-layer graphene with krypton spacer

Authors: Andrey M. Popov, Irina V. Lebedeva, Andrey A. Knizhnik, Yurii E. Lozovik, Boris V. Potapkin, Nikolai A. Poklonski, Andrei. I. Siahlo, Sergey A. Vyrko

Abstract: Structural, energetic and tribological characteristics of double-layer graphene with commensurate and incommensurate krypton spacers of nearly monolayer coverage are studied within the van der Waals-corrected density functional theory. It is shown that when the spacer is in the commensurate phase, the graphene layers have the AA stacking. For this phase, the barriers to relative in-plane translati… ▽ More Structural, energetic and tribological characteristics of double-layer graphene with commensurate and incommensurate krypton spacers of nearly monolayer coverage are studied within the van der Waals-corrected density functional theory. It is shown that when the spacer is in the commensurate phase, the graphene layers have the AA stacking. For this phase, the barriers to relative in-plane translational and rotational motion and the shear mode frequency of the graphene layers are calculated. For the incommensurate phase, both of the barriers are found to be negligibly small. A considerable change of tunneling conductance between the graphene layers separated by the commensurate krypton spacer at their relative subangstrom displacement is revealed by the use of the Bardeen method. The possibility of nanoelectromechanical systems based on the studied tribological and electronic properties of the considered heterostructures is discussed. △ Less

Submitted 9 November, 2013; originally announced November 2013.

Journal ref: J. Chem. Phys. 139, 154705 (2013)

Structure, energetic and tribological properties, and possible applications in NEMS of argon-separated double-layer graphene

Authors: Andrey M. Popov, Irina V. Lebedeva, Andrey A. Knizhnik, Yurii E. Lozovik, Boris V. Potapkin

Abstract: The possibility to control the commensurability and distance between graphene layers separated by a dielectric spacer is considered by the example of a heterostructure consisting of double-layer graphene separated by atomic layers of argon. Van der Waals corrected density functional theory (DFT-D) is applied to study structural, energetic and tribological characteristics of this heterostructure. I… ▽ More The possibility to control the commensurability and distance between graphene layers separated by a dielectric spacer is considered by the example of a heterostructure consisting of double-layer graphene separated by atomic layers of argon. Van der Waals corrected density functional theory (DFT-D) is applied to study structural, energetic and tribological characteristics of this heterostructure. It is found that in the ground state, monolayer and bilayer argon spacers are incommensurate with the graphene layers, whereas submonolayer argon spacers which are commensurate with the graphene layers can exist only as metastable states. The calculations show that this incommensurability provides negligibly small static friction for relative motion of argon-separated graphene layers and, therefore, such a heterostructure holds great promise for the use in nanoelectromechanical systems. A scheme and operational principles of the nanorelay based on the revealed tribological properties of the heterostructure are proposed. △ Less

Submitted 20 September, 2013; originally announced September 2013.

Comments: 31 pages, 4 figures

Journal ref: J. Phys. Chem. C 117, 11428-11435 (2013)

Graphene-based nanodynamometer

Authors: N. A. Poklonski, A. I. Siahlo, S. A. Vyrko, A. M. Popov, Yu. E. Lozovik, I. V. Lebedeva, A. A. Knizhnik

Abstract: A new concept of an electromechanical nanodynamometer based on the relative displacement of layers of bilayer graphene is proposed. In this nanodynamometer, force acting on one of the graphene layers causes the relative displacement of this layer and related change of conductance between the layers. Such a force can be determined by measurements of the tunneling conductance between the layers. Dep… ▽ More A new concept of an electromechanical nanodynamometer based on the relative displacement of layers of bilayer graphene is proposed. In this nanodynamometer, force acting on one of the graphene layers causes the relative displacement of this layer and related change of conductance between the layers. Such a force can be determined by measurements of the tunneling conductance between the layers. Dependences of the interlayer interaction energy and the conductance between the graphene layers on their relative position are calculated within the first-principles approach corrected for van der Waals interactions and the Bardeen method, respectively. The characteristics of the nanodynamometer are determined and its possible applications are discussed. △ Less

Submitted 14 December, 2015; v1 submitted 2 April, 2013; originally announced April 2013.

Comments: 5 pages, 4 figures

Journal ref: J. Comput. Theor. Nanosci. 10 (2013) 141-146

Ab initio study of edge effect on relative motion of walls in carbon nanotubes

Authors: Andrey M. Popov, Irina V. Lebedeva, Andrey A. Knizhnik, Yurii E. Lozovik, Boris V. Potapkin

Abstract: Interwall interaction energies of double-walled nanotubes (DWNTs) with long inner and short outer walls are calculated as functions of coordinates describing relative rotation and displacement of the walls using van der Waals corrected density functional theory. The magnitude of corrugation and the shape of the potential energy relief are found to be very sensitive to changes of the shorter wall l… ▽ More Interwall interaction energies of double-walled nanotubes (DWNTs) with long inner and short outer walls are calculated as functions of coordinates describing relative rotation and displacement of the walls using van der Waals corrected density functional theory. The magnitude of corrugation and the shape of the potential energy relief are found to be very sensitive to changes of the shorter wall length at subnanometer scale and atomic structure of the edges if at least one of the walls is chiral. Threshold forces required to start relative motion of the short walls and temperatures at which the transition between diffusive and free motion of the short walls takes place are estimated. The edges are also shown to provide a considerable contribution to the barrier to relative rotation of commensurate nonchiral walls. For such walls, temperatures of orientational melting, i.e. the crossover from rotational diffusion to free relative rotation, are estimated. The possibility to produce nanotube-based bolt/nut pairs and nanobearings is discussed. △ Less

Submitted 15 February, 2013; originally announced February 2013.

Comments: 29 pages, 5 figures

Journal ref: J. Chem. Phys. 138, 024703 (2013)

Modeling of graphene-based NEMS

Authors: Irina V. Lebedeva, Andrey A. Knizhnik, Andrey M. Popov, Yurii E. Lozovik, Boris V. Potapkin

Abstract: The possibility of designing nanoelectromechanical systems (NEMS) based on relative motion or vibrations of graphene layers is analyzed. Ab initio and empirical calculations of the potential relief of interlayer interaction energy in bilayer graphene are performed. A new potential based on the density functional theory calculations with the dispersion correction is developed to reliably reproduce… ▽ More The possibility of designing nanoelectromechanical systems (NEMS) based on relative motion or vibrations of graphene layers is analyzed. Ab initio and empirical calculations of the potential relief of interlayer interaction energy in bilayer graphene are performed. A new potential based on the density functional theory calculations with the dispersion correction is developed to reliably reproduce the potential relief of interlayer interaction energy in bilayer graphene. Telescopic oscillations and small relative vibrations of graphene layers are investigated using molecular dynamics simulations. It is shown that these vibrations are characterized with small Q-factor values. The perspectives of nanoelectromechanical systems based on relative motion or vibrations of graphene layers are discussed. △ Less

Submitted 12 May, 2012; originally announced May 2012.

Comments: 19 pages, 4 figures

Journal ref: Physica E 44, 949 - 954 (2012)

Barriers to motion and rotation of graphene layers based on measurements of shear mode frequencies

Authors: Andrey M. Popov, Irina V. Lebedeva, Andrey A. Knizhnik, Yurii E. Lozovik, Boris V. Potapkin

Abstract: Both van der Waals corrected density functional theory and classical calculations show that the potential relief of interaction energy between layers of graphite and few-layer graphene can be described by a simple expression containing only the first Fourier components. Thus a set of physical quantities and phenomena associated with in-plane relative vibration, translational motion and rotation of… ▽ More Both van der Waals corrected density functional theory and classical calculations show that the potential relief of interaction energy between layers of graphite and few-layer graphene can be described by a simple expression containing only the first Fourier components. Thus a set of physical quantities and phenomena associated with in-plane relative vibration, translational motion and rotation of graphene layers are interrelated and are determined by a single parameter characterizing the roughness of the potential energy relief. This relationship is used to estimate the barriers to relative motion and rotation of graphene layers based on experimental measurements of shear mode frequencies. △ Less

Submitted 3 May, 2012; originally announced May 2012.

Comments: 16 pages, 1 figure

Journal ref: Chemical Physics Letters 536, 82 - 86 (2012)

Nanotube-based scanning rotational microscope

Authors: Andrey M. Popov, Irina V. Lebedeva, Andrey A. Knizhnik

Abstract: A scheme of the scanning rotational microscope is designed. This scheme is based on using carbon nanotubes simultaneously as a probe tip and as a bolt/nut pair which converts translational displacements of two piezo actuators into pure rotation of the probe tip. First-principles calculations of the interaction energy between movable and rotational parts of the microscope confirms the capability fo… ▽ More A scheme of the scanning rotational microscope is designed. This scheme is based on using carbon nanotubes simultaneously as a probe tip and as a bolt/nut pair which converts translational displacements of two piezo actuators into pure rotation of the probe tip. First-principles calculations of the interaction energy between movable and rotational parts of the microscope confirms the capability for its operation. The scanning rotational microscope with a chemically functionalized nanotube-based tip can be used to study how the interaction between individual molecules or a molecule and a surface depends on their relative orientation. △ Less

Submitted 23 April, 2012; originally announced April 2012.

Comments: 4 pages, 3 figures

Journal ref: Appl. Phys. Lett. 100, 173101 (2012)

Ni-assisted transformation of graphene flakes to fullerenes

Authors: Irina V. Lebedeva, Andrey A. Knizhnik, Andrey M. Popov, Boris V. Potapkin

Abstract: Transformation of graphene flakes to fullerenes assisted by Ni clusters is investigated using molecular dynamics simulations. The bond-order potential for Ni-C systems is developed. The potential reproduces the experimental and first-principles data on the physical properties of pure Ni as well as on relative energies of carbon species on Ni surfaces and in Ni bulk. The potential is applied for mo… ▽ More Transformation of graphene flakes to fullerenes assisted by Ni clusters is investigated using molecular dynamics simulations. The bond-order potential for Ni-C systems is developed. The potential reproduces the experimental and first-principles data on the physical properties of pure Ni as well as on relative energies of carbon species on Ni surfaces and in Ni bulk. The potential is applied for molecular dynamics simulations of the transformation of graphene flakes consisting of 50 - 400 atoms with and without Ni clusters attached. Free fullerenes, fullerenes with Ni clusters attached from outside and fullerenes encapsulating Ni clusters (Ni endofullerenes) are observed to form in the presence of Ni clusters consisting of 5 - 80 atoms. Moreover, a new type of heterofullerenes with a patch made of a Ni cluster is found to form as an intermediate structure during the transformation. The Ni clusters are shown to reduce the activation energy for the graphene-fullerene transformation from 4.0 eV to 1.5 - 1.9 eV, providing the decrease of the minimal temperature at which such a transformation can be observed experimentally from about 1400 K for free graphene flakes to about 700 - 800 K. While the transformation of free graphene flakes is found to occur through formation of chains of two-coordinated carbon atoms at the flake edges, the mechanism of the Ni-assisted graphene-fullerene transformation is revealed to be based on the transfer of carbon atoms from the graphene flake to the Ni cluster and back. The way of controlled synthesis of endofullerenes with a transition metal cluster inside and heterofullerenes with a transition metal patch is also proposed. △ Less

Submitted 16 April, 2012; originally announced April 2012.

Comments: 39 pages, 8 figures

Journal ref: J. Phys. Chem. C 116, 6572 - 6584 (2012)

Molecular dynamics simulation of the self-retracting motion of a graphene flake

Authors: Andrei M. Popov, Irina V. Lebedeva, Andrey A. Knizhnik, Yurii E. Lozovik, Boris V. Potapkin

Abstract: The self-retracting motion of a graphene flake on a stack of graphene flakes is studied using molecular dynamics simulations. It is shown that in the case when the extended flake is initially rotated to an incommensurate state, there is no barrier to the self-retracting motion of the flake and the flake retracts as fast as possible. If the extended flake is initially commensurate with the other fl… ▽ More The self-retracting motion of a graphene flake on a stack of graphene flakes is studied using molecular dynamics simulations. It is shown that in the case when the extended flake is initially rotated to an incommensurate state, there is no barrier to the self-retracting motion of the flake and the flake retracts as fast as possible. If the extended flake is initially commensurate with the other flakes, the self-retracting motion is hindered by potential energy barriers. However, in this case, the rotation of the flake to incommensurate states is often observed. Such a rotation is found to be induced by the torque acting on the flake on hills of the potential relief of the interaction energy between the flakes. Contrary to carbon nanotubes, telescopic oscillations of the graphene flake are suppressed because of the high dynamic friction related to the excitation of flexural vibrations of the flake. This makes graphene promising for the use in fast-responding electromechanical memory cells. △ Less

Submitted 19 December, 2011; originally announced December 2011.

Comments: 24 pages, 8 figures

Journal ref: Phys. Rev. B 84, 245437 (2011)

Commensurate-incommensurate phase transition in bilayer graphene

Authors: Andrey M. Popov, Irina V. Lebedeva, Andrey A. Knizhnik, Yurii E. Lozovik, Boris V. Potapkin

Abstract: A commensurate-incommensurate phase transition in bilayer graphene is investigated in the framework of the Frenkel-Kontorova model extended to the case of two interacting chains of particles. Analytic expressions are derived to estimate the critical unit elongation of one of the graphene layers at which the transition to the incommensurate phase takes place, the length and formation energy of inco… ▽ More A commensurate-incommensurate phase transition in bilayer graphene is investigated in the framework of the Frenkel-Kontorova model extended to the case of two interacting chains of particles. Analytic expressions are derived to estimate the critical unit elongation of one of the graphene layers at which the transition to the incommensurate phase takes place, the length and formation energy of incommensurability defects (IDs) and the threshold force required to start relative motion of the layers on the basis of dispersion-corrected density functional theory calculations of the interlayer interaction energy as a function of the relative position of the layers. These estimates are confirmed by atomistic calculations using the DFT-D based classical potential. The possibility to measure the barriers for relative motion of graphene layers by the study of formation of IDs in bilayer graphene is discussed. △ Less

Submitted 10 August, 2011; originally announced August 2011.

Comments: 22 pages, 4 figures

Journal ref: Phys. Rev. B 84, 045404 (2011)

Effect of Peierls transition in armchair carbon nanotube on dynamical behaviour of encapsulated fullerene

Authors: N. A. Poklonski, S. A. Vyrko, E. F. Kislyakov, N. N. Hieu, O. N. Bubel', A. M. Popov, Yu. E. Lozovik, A. A. Knizhnik, I. V. Lebedeva, N. A. Viet

Abstract: The changes of dynamical behaviour of a single fullerene molecule inside an armchair carbon nanotube caused by the structural Peierls transition in the nanotube are considered. The structures of the smallest C20 and Fe@C20 fullerenes are computed using the spin-polarized density functional theory. Significant changes of the barriers for motion along the nanotube axis and rotation of these fulleren… ▽ More The changes of dynamical behaviour of a single fullerene molecule inside an armchair carbon nanotube caused by the structural Peierls transition in the nanotube are considered. The structures of the smallest C20 and Fe@C20 fullerenes are computed using the spin-polarized density functional theory. Significant changes of the barriers for motion along the nanotube axis and rotation of these fullerenes inside the (8,8) nanotube are found at the Peierls transition. It is shown that the coefficients of translational and rotational diffusions of these fullerenes inside the nanotube change by several orders of magnitude. The possibility of inverse orientational melting, i.e. with a decrease of temperature, for the systems under consideration is predicted. △ Less

Submitted 8 February, 2018; v1 submitted 6 April, 2011; originally announced April 2011.

Comments: 9 pages, 6 figures, 1 table

Journal ref: Nanoscale Research Letters, 6 (2011) 216; Open access

Diffusion and drift of graphene flake on graphite surface

Authors: Irina V. Lebedeva, Andrey A. Knizhnik, Andrey M. Popov, Olga V. Ershova, Yurii E. Lozovik, Boris V. Potapkin

Abstract: Diffusion and drift of a graphene flake on a graphite surface are analyzed. A potential energy relief of the graphene flake is computed using ab initio and empirical calculations. Based on the analysis of this relief, different mechanisms of diffusion and drift of the graphene flake on the graphite surface are considered. A new mechanism of diffusion and drift of the flake is proposed. According t… ▽ More Diffusion and drift of a graphene flake on a graphite surface are analyzed. A potential energy relief of the graphene flake is computed using ab initio and empirical calculations. Based on the analysis of this relief, different mechanisms of diffusion and drift of the graphene flake on the graphite surface are considered. A new mechanism of diffusion and drift of the flake is proposed. According to the proposed mechanism, rotational transition of the flake from commensurate to incommensurate state takes place with subsequent simultaneous rotation and translational motion until a commensurate state is reached again, and so on. Analytic expressions for the diffusion coefficient and mobility of the flake corresponding to different mechanisms are derived in wide ranges of temperatures and sizes of the flake. The molecular dynamics simulations and estimates based on ab initio and empirical calculations demonstrate that the proposed mechanism can be dominant under certain conditions. The influence of structural defects on the diffusion of the flake is examined on the basis of calculations of the potential energy relief and molecular dynamics simulations. The methods of control over the diffusion and drift of graphene components in nanoelectromechanical systems are discussed. The possibility to experimentally determine the barriers to relative motion of graphene layers based on the study of diffusion of a graphene flake is considered. The results obtained can be also applied to polycyclic aromatic molecules on graphene and should be qualitatively valid for a set of commensurate adsorbate-adsorbent systems. △ Less

Submitted 28 March, 2011; originally announced March 2011.

Comments: 42 pages, 7 figures

Journal ref: J. Chem. Phys. 134, 104505 (2011)

Fast diffusion of graphene flake on graphene layer

Authors: Irina V. Lebedeva, Andrey A. Knizhnik, Andrey M. Popov, Olga V. Ershova, Yurii E. Lozovik, Boris V. Potapkin

Abstract: Diffusion of a graphene flake on a graphene layer is analyzed and a new diffusion mechanism is proposed for the system under consideration. According to this mechanism, rotational transition of the flake from commensurate to incommensurate states takes place with subsequent simultaneous rotation and translational motion until the commensurate state is reached again, and so on. The molecular dynami… ▽ More Diffusion of a graphene flake on a graphene layer is analyzed and a new diffusion mechanism is proposed for the system under consideration. According to this mechanism, rotational transition of the flake from commensurate to incommensurate states takes place with subsequent simultaneous rotation and translational motion until the commensurate state is reached again, and so on. The molecular dynamics simulations and analytic estimates based on ab initio and semi-empirical calculations demonstrate that the proposed diffusion mechanism is dominant at temperatures T ~ Tcom, where Tcom corresponds to the barrier for transitions of the flake between adjacent energy minima in the commensurate states. For example, for the flake consisting of ~ 40, 200 and 700 atoms the contribution of the proposed diffusion mechanism through rotation of the flake to the incommensurate states exceeds that for diffusion of the flake in the commensurate states by one-two orders of magnitude at temperatures 50 - 150 K, 200 - 600 K and 800 - 2400 K, respectively. The possibility to experimentally measure the barriers to relative motion of graphene layers based on the study of diffusion of a graphene flake is considered. The results obtained are also relevant for understanding of dynamic behavior of polycyclic aromatic molecules on graphene and should be qualitatively valid for a set of commensurate adsorbate-adsorbent systems. △ Less

Submitted 20 February, 2011; originally announced February 2011.

Comments: 33 pages, 6 figures

Journal ref: Phys. Rev. B 82, 155460 (2010)

Nanotube-Based NEMS: Control vs. Thermodynamic Fluctuations

Authors: O. V. Ershova, I. V. Lebedeva, Yu. E. Lozovik, A. M. Popov, A. A. Knizhnik, B. V. Potapkin, O. N. Bubel, E. F. Kislyakov, N. A. Poklonski

Abstract: Multi-scale simulations of nanotube-based nanoelectromechanical systems (NEMS) controlled by a nonuniform electric field are performed by an example of a gigahertz oscillator. Using molecular dynamics simulations, we obtain the friction coefficients and characteristics of the thermal noise associated with the relative motion of the nanotube walls. These results are used in a phenomenological one-d… ▽ More Multi-scale simulations of nanotube-based nanoelectromechanical systems (NEMS) controlled by a nonuniform electric field are performed by an example of a gigahertz oscillator. Using molecular dynamics simulations, we obtain the friction coefficients and characteristics of the thermal noise associated with the relative motion of the nanotube walls. These results are used in a phenomenological one-dimensional oscillator model. The analysis based both on this model and the Fokker-Planck equation for the oscillation energy distribution function shows how thermodynamic fluctuations restrict the possibility of controlling NEMS operation for systems of small sizes. The parameters of the force for which control of the oscillator operation is possible are determined. △ Less

Submitted 29 April, 2010; originally announced April 2010.

Comments: 40 pages, 12 figures

Journal ref: Phys. Rev. B 81, 155453 (2010)

Magnetically operated nanorelay based on two single-walled carbon nanotubes filled with endofullerenes Fe@C20

Authors: N. A. Poklonski, E. F. Kislyakov, S. A. Vyrko, N. N. Hieu, O. N. Bubel', A. I. Siahlo, I. V. Lebedeva, A. A. Knizhnik, A. M. Popov, Yu. E. Lozovik

Abstract: Structural and energy characteristics of the smallest magnetic endofullerene Fe@C20 have been calculated using the density functional theory approach. The ground state of Fe@C20 is found to be a septet state, and the magnetic moment of Fe@C20 is estimated to be 8 Bohr magnetons. Characteristics of an (8,8) carbon nanotube with a single Fe@C20 inside are studied in the framework of the semiempirica… ▽ More Structural and energy characteristics of the smallest magnetic endofullerene Fe@C20 have been calculated using the density functional theory approach. The ground state of Fe@C20 is found to be a septet state, and the magnetic moment of Fe@C20 is estimated to be 8 Bohr magnetons. Characteristics of an (8,8) carbon nanotube with a single Fe@C20 inside are studied in the framework of the semiempirical approach. The scheme of a magnetic nanorelay based on cantilevered nanotubes filled with magnetic endofullerenes is elaborated. The proposed nanorelay is turned on as a result of bending of nanotubes by a magnetic force. Operational characteristics of such a nanorelay based on (8,8) and (21,21) nanotubes fully filled with Fe@C20 are estimated and compared to the ones of a nanorelay made of a (21,21) nanotube fully filled with experimentally observed (Ho3N)@C80 with the magnetic moment of 21 Bohr magnetons. Room temperature operation of (21,21) nanotube based nanorelays is shown. △ Less

Submitted 24 April, 2010; originally announced April 2010.

Comments: 18 pages, 9 figures

Journal ref: J. Nanophotonics, 4 (2010) 041675 (18pp)

Nanomechanical Properties and Phase Transitions in a Double-Walled (5,5)@(10,10) Carbon Nanotube: ab initio Calculations

Authors: A. M. Popov, Yu. E. Lozovik, A. S. Sobennikov, A. A. Knizhnik

Abstract: The structure and elastic properties of (5,5) and (10,10) nanotubes, as well as barriers for relative rotation of the walls and their relative sliding along the axis in a double-walled (5,5)@(10,10) carbon nanotube, are calculated using the density functional method. The results of these calculations are the basis for estimating the following physical quantities: shear strengths and diffusion co… ▽ More The structure and elastic properties of (5,5) and (10,10) nanotubes, as well as barriers for relative rotation of the walls and their relative sliding along the axis in a double-walled (5,5)@(10,10) carbon nanotube, are calculated using the density functional method. The results of these calculations are the basis for estimating the following physical quantities: shear strengths and diffusion coefficients for relative sliding along the axis and rotation of the walls, as well as frequencies of relative rotational and translational oscillations of the walls. The commensurability-incommensurability phase transition is analyzed. The length of the incommensurability defect is estimated on the basis of ab initio calculations. It is proposed that (5,5)@(10,10) double-walled carbon nanotube be used as a plain bearing. The possibility of experimental verification of the results is discussed. △ Less

Submitted 18 August, 2009; originally announced August 2009.

Comments: 14 pages

Journal ref: Journal of Experimental and Theoretical Physics 108(4) 621-628(2009)

Dissipation and fluctuations in nanoelectromechanical systems based on carbon nanotubes

Authors: I. V. Lebedeva, A. A. Knizhnik, A. M. Popov, Yu. E. Lozovik, B. V. Potapkin

Abstract: Tribological characteristics of nanotube-based nanoelectromechanical systems (NEMS) exemplified by a gigahertz oscillator are studied. Various factors that influence the tribological properties of the nanotube-based NEMS are quantitatively analyzed with the use of molecular dynamics calculations of the quality factor (Q-factor) of the gigahertz oscillator. We demonstrate that commensurability of… ▽ More Tribological characteristics of nanotube-based nanoelectromechanical systems (NEMS) exemplified by a gigahertz oscillator are studied. Various factors that influence the tribological properties of the nanotube-based NEMS are quantitatively analyzed with the use of molecular dynamics calculations of the quality factor (Q-factor) of the gigahertz oscillator. We demonstrate that commensurability of the nanotube walls can increase the dissipation rate, while the structure of the wall ends and the nanotube length do not influence the Q-factor. It is shown that the dissipation rate depends on the interwall distance and the way of fixation of the outer wall and is significant in the case of a poor fixation for the nanotubes with a large interwall distance. Defects are found to strongly decrease the Q-factor due to the excitation of low-frequency vibrational modes. No universal correlation between the static friction forces and the energy dissipation rate is established. We propose an explanation of the obtained results on the basis of the classical theory of vibrational-translational relaxation. Significant thermodynamics fluctuations are revealed in the gigahertz oscillator by molecular dynamics simulations and analyzed in the framework of the fluctuation-dissipation theorem. Possibility of designing the NEMS with a desirable Q-factor and their applications are discussed on the basis of the above results. △ Less

Submitted 4 April, 2009; originally announced April 2009.

Comments: 32 pages, 7 figures

Journal ref: I. V. Lebedeva, A. A. Knizhnik, A. M. Popov, Yu. E. Lozovik and B. V. Potapkin, Nanotechnology 20 (2009) 105202

Universal linear relations between susceptibility and Tc in cuprates

Authors: Amit Kanigel, Amit Keren, Arkady Knizhnik, Oren Shafir

Abstract: We developed an experimental method for measuring the intrinsic susceptibility χof powder of cuprate superconductors in the zero field limit using a DC-magnetometer. The method is tested with lead spheres. Using this method we determine χfor a number of cuprate families as a function of do**. A universal linear (and not proportionality) relation between Tc and χis found. We suggest possible ex… ▽ More We developed an experimental method for measuring the intrinsic susceptibility χof powder of cuprate superconductors in the zero field limit using a DC-magnetometer. The method is tested with lead spheres. Using this method we determine χfor a number of cuprate families as a function of do**. A universal linear (and not proportionality) relation between Tc and χis found. We suggest possible explanations for this phenomenon. △ Less

Submitted 12 April, 2005; originally announced April 2005.

Comments: Accepted for publication in PRB

Quantum Critical Point, Scaling, and Universality in High Tc [CaxLa(1-x)][Ba(2-c-x)La(c+x)]Cu3Oy

Authors: B. Watkins, H. Chashka, Y. Direktovich, A. Knizhnik, Y. Eckstein

Abstract: Using charge transport observations on sintered ceramic samples of CLBLCO, we failed to observe the Quantum Critical Point (QCP) where it is expected. Experimental data relating Cooper pair density, electrical conductivity, and superconductivity critical temperature suggest that Homes' relation might need a more specific definition of 'sigma'. Transport observations on YBCO single crystals will… ▽ More Using charge transport observations on sintered ceramic samples of CLBLCO, we failed to observe the Quantum Critical Point (QCP) where it is expected. Experimental data relating Cooper pair density, electrical conductivity, and superconductivity critical temperature suggest that Homes' relation might need a more specific definition of 'sigma'. Transport observations on YBCO single crystals will resolve this question. △ Less

Submitted 26 January, 2005; originally announced January 2005.

Comments: 5 pages, 3 figures

Common energy scale for magnetism and superconductivity in underdoped cuprates: a MuSR investigation of (CaLa)(BaLa)CuO

Authors: Amit Kanigel, Amit Keren, Yaakov Eckstein, Arkady Knizhnik, James S. Lord, Alex Amato

Abstract: We characterize the spontaneous magnetic field, and determine the associated temperature Tg, in the superconducting state of Ca(x)La(1-x)Ba(1.75-x)La(0.25+x)Cu(3)O(y) using zero and longitudinal field MuSR measurements for various values of x and y. Our major findings are: (I) Tg and Tc are controlled by the same energy scale, (II) the phase separation between hole poor and hole rich regions is… ▽ More We characterize the spontaneous magnetic field, and determine the associated temperature Tg, in the superconducting state of Ca(x)La(1-x)Ba(1.75-x)La(0.25+x)Cu(3)O(y) using zero and longitudinal field MuSR measurements for various values of x and y. Our major findings are: (I) Tg and Tc are controlled by the same energy scale, (II) the phase separation between hole poor and hole rich regions is a microscopic one, and (III) spontaneous magnetic fields appear gradually with no moment size evolution. △ Less

Submitted 3 March, 2002; v1 submitted 17 October, 2001; originally announced October 2001.