-
Characterisation of analogue Monolithic Active Pixel Sensor test structures implemented in a 65 nm CMOS imaging process
Authors:
Gianluca Aglieri Rinella,
Giacomo Alocco,
Matias Antonelli,
Roberto Baccomi,
Stefania Maria Beole,
Mihail Bogdan Blidaru,
Bent Benedikt Buttwill,
Eric Buschmann,
Paolo Camerini,
Francesca Carnesecchi,
Marielle Chartier,
Yongjun Choi,
Manuel Colocci,
Giacomo Contin,
Dominik Dannheim,
Daniele De Gruttola,
Manuel Del Rio Viera,
Andrea Dubla,
Antonello di Mauro,
Maurice Calvin Donner,
Gregor Hieronymus Eberwein,
Jan Egger,
Laura Fabbietti,
Finn Feindt,
Kunal Gautam
, et al. (69 additional authors not shown)
Abstract:
Analogue test structures were fabricated using the Tower Partners Semiconductor Co. CMOS 65 nm ISC process. The purpose was to characterise and qualify this process and to optimise the sensor for the next generation of Monolithic Active Pixels Sensors for high-energy physics. The technology was explored in several variants which differed by: do** levels, pixel geometries and pixel pitches (10-25…
▽ More
Analogue test structures were fabricated using the Tower Partners Semiconductor Co. CMOS 65 nm ISC process. The purpose was to characterise and qualify this process and to optimise the sensor for the next generation of Monolithic Active Pixels Sensors for high-energy physics. The technology was explored in several variants which differed by: do** levels, pixel geometries and pixel pitches (10-25 $μ$m). These variants have been tested following exposure to varying levels of irradiation up to 3 MGy and $10^{16}$ 1 MeV n$_\text{eq}$ cm$^{-2}$. Here the results from prototypes that feature direct analogue output of a 4$\times$4 pixel matrix are reported, allowing the systematic and detailed study of charge collection properties. Measurements were taken both using $^{55}$Fe X-ray sources and in beam tests using minimum ionizing particles. The results not only demonstrate the feasibility of using this technology for particle detection but also serve as a reference for future applications and optimisations.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Digital Pixel Test Structures implemented in a 65 nm CMOS process
Authors:
Gianluca Aglieri Rinella,
Anton Andronic,
Matias Antonelli,
Mauro Aresti,
Roberto Baccomi,
Pascal Becht,
Stefania Beole,
Justus Braach,
Matthew Daniel Buckland,
Eric Buschmann,
Paolo Camerini,
Francesca Carnesecchi,
Leonardo Cecconi,
Edoardo Charbon,
Giacomo Contin,
Dominik Dannheim,
Joao de Melo,
Wen**g Deng,
Antonello di Mauro,
Jan Hasenbichler,
Hartmut Hillemanns,
Geun Hee Hong,
Artem Isakov,
Antoine Junique,
Alex Kluge
, et al. (27 additional authors not shown)
Abstract:
The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 65 nm process for use in the next generation of vertex detectors. The ITS3 aims to employ wafer-scale Monolithic Active Pixel Sensors thinned down to 20 to 40 um and bent to form truly cylindrical half barrels. Among the…
▽ More
The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 65 nm process for use in the next generation of vertex detectors. The ITS3 aims to employ wafer-scale Monolithic Active Pixel Sensors thinned down to 20 to 40 um and bent to form truly cylindrical half barrels. Among the first critical steps towards the realisation of this detector is to validate the sensor technology through extensive characterisation both in the laboratory and with in-beam measurements. The Digital Pixel Test Structure (DPTS) is one of the prototypes produced in the first sensor submission in this technology and has undergone a systematic measurement campaign whose details are presented in this article.
The results confirm the goals of detection efficiency and non-ionising and ionising radiation hardness up to the expected levels for ALICE ITS3 and also demonstrate operation at +20 C and a detection efficiency of 99% for a DPTS irradiated with a dose of $10^{15}$ 1 MeV n$_{\mathrm{eq}}/$cm$^2$. Furthermore, spatial, timing and energy resolutions were measured at various settings and irradiation levels.
△ Less
Submitted 10 July, 2023; v1 submitted 16 December, 2022;
originally announced December 2022.
-
The MAPS foil
Authors:
S. Beolé,
F. Carnesecchi,
G. Contin,
R. de Oliveira,
A. di Mauro,
S. Ferry,
H. Hillemanns,
A. Junique,
A. Kluge,
L. Lautner,
M. Mager,
B. Mehl,
K. Rebane,
F. Reidt,
I. Sanna,
M. Šuljić,
A. Yüncü
Abstract:
We present a method of embedding a Monolithic Active Pixel Sensor (MAPS) into a flexible printed circuit board (FPC) and its interconnection by means of through-hole copper plating. The resulting assembly, baptised "MAPS foil", is a flexible, light, protected, and fully integrated detector module. By using widely available printed circuit board manufacturing techniques, the production of these dev…
▽ More
We present a method of embedding a Monolithic Active Pixel Sensor (MAPS) into a flexible printed circuit board (FPC) and its interconnection by means of through-hole copper plating. The resulting assembly, baptised "MAPS foil", is a flexible, light, protected, and fully integrated detector module. By using widely available printed circuit board manufacturing techniques, the production of these devices can be scaled easily in size and volume, making it a compelling candidate for future large-scale applications.
A first series of prototypes that embed the ALPIDE chip has been produced, functionally tested, and shown to be working.
△ Less
Submitted 19 October, 2022; v1 submitted 25 May, 2022;
originally announced May 2022.
-
ALICE Central Trigger System for LHC Run 3
Authors:
Jakub Kvapil,
Anju Bhasin,
Marek Bombara,
David Evans,
Anton Jusko,
Alexander Kluge,
Marian Krivda,
Ivan Kralik,
Roman Lietava,
Sanket Kumar Nayak,
Simone Ragoni,
Orlando Villalobos Baillie
Abstract:
A major upgrade of the ALICE experiment is in progress and will result in high-rate data taking during LHC Run 3 (2022-2024). The LHC interaction rate at Point 2 where the ALICE experiment is located will be increased to $50\ \mathrm{kHz}$ in Pb--Pb collisions and $1\ \mathrm{MHz}$ in pp collisions. The ALICE experiment will be able to read out data at these interaction rates leading to an increas…
▽ More
A major upgrade of the ALICE experiment is in progress and will result in high-rate data taking during LHC Run 3 (2022-2024). The LHC interaction rate at Point 2 where the ALICE experiment is located will be increased to $50\ \mathrm{kHz}$ in Pb--Pb collisions and $1\ \mathrm{MHz}$ in pp collisions. The ALICE experiment will be able to read out data at these interaction rates leading to an increase of the collected luminosity by a factor of up to about 100 with respect to LHC Runs 1 and 2. To satisfy these requirements, a new readout system has been developed for most of the ALICE detectors, allowing the full readout of the data at the required interaction rates without the need for a hardware trigger selection. A novel trigger and timing distribution system will be implemented, based on Passive Optical Network (PON) and GigaBit Transceiver (GBT) technology. To assure backward compatibility a triggered mode based on RD12 Trigger-Timing-Control (TTC) technology, as used in the previous LHC runs, will be maintained and re-implemented under the new Central Trigger System (CTS). A new universal ALICE Trigger Board (ATB) based on the Xilinx Kintex Ultrascale FPGA has been designed to function as a Central Trigger Processor (CTP), Local Trigger Unit (LTU), and monitoring interfaces.
In this paper, this new hybrid multilevel system with continuous readout will be described, together with the triggering mechanism and algorithms. An overview of the CTS, the design of the ATB and the different communication protocols will be presented.
△ Less
Submitted 30 June, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors
Authors:
ALICE ITS project,
:,
G. Aglieri Rinella,
M. Agnello,
B. Alessandro,
F. Agnese,
R. S. Akram,
J. Alme,
E. Anderssen,
D. Andreou,
F. Antinori,
N. Apadula,
P. Atkinson,
R. Baccomi,
A. Badalà,
A. Balbino,
C. Bartels,
R. Barthel,
F. Baruffaldi,
I. Belikov,
S. Beole,
P. Becht,
A. Bhatti,
M. Bhopal,
N. Bianchi
, et al. (230 additional authors not shown)
Abstract:
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to ra…
▽ More
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to radii of about 2cm without any signs of mechanical or electrical damage. During a subsequent characterisation using a 5.4GeV electron beam, it was further confirmed that they preserve their full electrical functionality as well as particle detection performance.
In this article, the bending procedure and the setup used for characterisation are detailed. Furthermore, the analysis of the beam test, including the measurement of the detection efficiency as a function of beam position and local inclination angle, is discussed. The results show that the sensors maintain their excellent performance after bending to radii of 2cm, with detection efficiencies above 99.9% at typical operating conditions, paving the way towards a new class of detectors with unprecedented low material budget and ideal geometrical properties.
△ Less
Submitted 17 August, 2021; v1 submitted 27 May, 2021;
originally announced May 2021.
-
The complex multi-scale structure in simulated and observed emission maps of the proto-cluster cloud G0.253+0.016 (`the Brick')
Authors:
Maya A. Petkova,
J. M. Diederik Kruijssen,
A. Louise Kluge,
Simon C. O. Glover,
Daniel L. Walker,
Steven N. Longmore,
Jonathan D. Henshaw,
Stefan Reissl,
James E. Dale
Abstract:
The Central Molecular Zone (CMZ; the central ~ 500 pc of the Milky Way) hosts molecular clouds in an extreme environment of strong shear, high gas pressure and density, and complex chemistry. G0.253+0.016, also known as `the Brick', is the densest, most compact and quiescent of these clouds. High-resolution observations with the Atacama Large Millimeter/submillimeter Array (ALMA) have revealed its…
▽ More
The Central Molecular Zone (CMZ; the central ~ 500 pc of the Milky Way) hosts molecular clouds in an extreme environment of strong shear, high gas pressure and density, and complex chemistry. G0.253+0.016, also known as `the Brick', is the densest, most compact and quiescent of these clouds. High-resolution observations with the Atacama Large Millimeter/submillimeter Array (ALMA) have revealed its complex, hierarchical structure. In this paper we compare the properties of recent hydrodynamical simulations of the Brick to those of the ALMA observations. To facilitate the comparison, we post-process the simulations and create synthetic ALMA maps of molecular line emission from eight molecules. We correlate the line emission maps to each other and to the mass column density, and find that HNCO is the best mass tracer of the eight emission lines within the simulations. Additionally, we characterise the spatial structure of the observed and simulated cloud using the density probability distribution function (PDF), spatial power spectrum, fractal dimension, and moments of inertia. While we find good agreement between the observed and simulated data in terms of power spectra and fractal dimensions, there are key differences in the density PDFs and moments of inertia, which we attribute to the omission of magnetic fields in the simulations. This demonstrates that the presence of the Galactic potential can reproduce many cloud properties, but additional physical processes are needed to fully explain the gas structure.
△ Less
Submitted 1 August, 2023; v1 submitted 19 April, 2021;
originally announced April 2021.
-
The NA62 GigaTracKer: a low mass high intensity beam 4D tracker with 65 ps time resolution on tracks
Authors:
G. Aglieri Rinella,
D. Alvarez Feito,
R. Arcidiacono,
C. Biino,
S. Bonacini,
A. Ceccucci,
S. Chiozzi,
E. Cortina Gil,
A. Cotta Ramusino,
H. Danielsson,
J. Degrange,
M. Fiorini,
L. Federici,
E. Gamberini,
A. Gianoli,
J. Kaplon,
A. Kleimenova,
A. Kluge,
R. Malaguti,
A. Mapelli,
F. Marchetto,
E. Martín Albarrán,
E. Migliore,
E. Minucci,
M. Morel
, et al. (12 additional authors not shown)
Abstract:
The GigaTracKer (GTK) is the beam spectrometer of the CERN NA62 experiment. The detector features challenging design specifications, in particular a peak particle flux reaching up to 2.0 MHz/mm$^2$, a single hit time resolution smaller than 200 ps and, a material budget of 0.5% X$_0$ per tracking plane. To fulfill these specifications, novel technologies were especially employed in the domain of s…
▽ More
The GigaTracKer (GTK) is the beam spectrometer of the CERN NA62 experiment. The detector features challenging design specifications, in particular a peak particle flux reaching up to 2.0 MHz/mm$^2$, a single hit time resolution smaller than 200 ps and, a material budget of 0.5% X$_0$ per tracking plane. To fulfill these specifications, novel technologies were especially employed in the domain of silicon hybrid time-stam** pixel technology and micro-channel cooling. This article describes the detector design and reports on the achieved performance.
△ Less
Submitted 16 July, 2019; v1 submitted 29 April, 2019;
originally announced April 2019.
-
A next-generation LHC heavy-ion experiment
Authors:
D. Adamová,
G. Aglieri Rinella,
M. Agnello,
Z. Ahammed,
D. Aleksandrov,
A. Alici,
A. Alkin,
T. Alt,
I. Altsybeev,
D. Andreou,
A. Andronic,
F. Antinori,
P. Antonioli,
H. Appelshäuser,
R. Arnaldi,
I. C. Arsene,
M. Arslandok,
R. Averbeck,
M. D. Azmi,
X. Bai,
R. Bailhache,
R. Bala,
L. Barioglio,
G. G. Barnaföldi,
L. S. Barnby
, et al. (374 additional authors not shown)
Abstract:
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th…
▽ More
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.
△ Less
Submitted 2 May, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Search for $K^{+}\rightarrowπ^{+}ν\overlineν$ at NA62
Authors:
NA62 Collaboration,
G. Aglieri Rinella,
R. Aliberti,
F. Ambrosino,
R. Ammendola,
B. Angelucci,
A. Antonelli,
G. Anzivino,
R. Arcidiacono,
I. Azhinenko,
S. Balev,
M. Barbanera,
J. Bendotti,
A. Biagioni,
L. Bician,
C. Biino,
A. Bizzeti,
T. Blazek,
A. Blik,
B. Bloch-Devaux,
V. Bolotov,
V. Bonaiuto,
M. Boretto,
M. Bragadireanu,
D. Britton
, et al. (227 additional authors not shown)
Abstract:
$K^{+}\rightarrowπ^{+}ν\overlineν$ is one of the theoretically cleanest meson decay where to look for indirect effects of new physics complementary to LHC searches. The NA62 experiment at CERN SPS is designed to measure the branching ratio of this decay with 10\% precision. NA62 took data in pilot runs in 2014 and 2015 reaching the final designed beam intensity. The quality of 2015 data acquired,…
▽ More
$K^{+}\rightarrowπ^{+}ν\overlineν$ is one of the theoretically cleanest meson decay where to look for indirect effects of new physics complementary to LHC searches. The NA62 experiment at CERN SPS is designed to measure the branching ratio of this decay with 10\% precision. NA62 took data in pilot runs in 2014 and 2015 reaching the final designed beam intensity. The quality of 2015 data acquired, in view of the final measurement, will be presented.
△ Less
Submitted 24 July, 2018;
originally announced July 2018.
-
Trigger and Timing Distributions using the TTC-PON and GBT Bridge Connection in ALICE for the LHC Run 3 Upgrade
Authors:
Jubin Mitra,
Erno David,
Eduardo Mendez,
Shuaib Ahmad Khan,
Tivadar Kiss,
Sophie Baron,
Alex Kluge,
Tapan Nayak
Abstract:
The ALICE experiment at CERN is preparing for a major upgrade for the third phase of data taking run (Run 3), when the high luminosity phase of the Large Hadron Collider (LHC) starts. The increase in the beam luminosity will result in high interaction rate causing the data acquisition rate to exceed 3 TB/sec. In order to acquire data for all the events and to handle the increased data rate, a tran…
▽ More
The ALICE experiment at CERN is preparing for a major upgrade for the third phase of data taking run (Run 3), when the high luminosity phase of the Large Hadron Collider (LHC) starts. The increase in the beam luminosity will result in high interaction rate causing the data acquisition rate to exceed 3 TB/sec. In order to acquire data for all the events and to handle the increased data rate, a transition in the readout electronics architecture from the triggered to the trigger-less acquisition mode is required. In this new architecture, a dedicated electronics block called the Common Readout Unit (CRU) is defined to act as a nodal communication point for detector data aggregation and as a distribution point for timing, trigger and control (TTC) information. TTC information in the upgraded triggerless readout architecture uses two asynchronous high-speed serial links connections: the TTC-PON and the GBT. We have carried out a study to evaluate the quality of the embedded timing signals forwarded by the CRU to the connected electronics using the TTC-PON and GBT bridge connection. We have used four performance metrics to characterize the communication bridge: (a)the latency added by the firmware logic, (b)the jitter cleaning effect of the PLL on the timing signal, (c)BER analysis for quantitative measurement of signal quality, and (d)the effect of optical transceivers parameter settings on the signal strength. Reliability study of the bridge connection in maintaining the phase consistency of timing signals is conducted by performing multiple iterations of power on/off cycle, firmware upgrade and reset assertion/de-assertion cycle (PFR cycle). The test results are presented and discussed concerning the performance of the TTC-PON and GBT bridge communication chain using the CRU prototype and its compliance with the ALICE timing requirements.
△ Less
Submitted 4 June, 2018;
originally announced June 2018.
-
Prospects for $K^+ \to π^+ ν\bar{ ν}$ at CERN in NA62
Authors:
G. Aglieri Rinella,
R. Aliberti,
F. Ambrosino,
B. Angelucci,
A. Antonelli,
G. Anzivino,
R. Arcidiacono,
I. Azhinenko,
S. Balev,
J. Bendotti,
A. Biagioni,
C. Biino,
A. Bizzeti,
T. Blazek,
A. Blik,
B. Bloch-Devaux,
V. Bolotov,
V. Bonaiuto,
M. Bragadireanu,
D. Britton,
G. Britvich,
N. Brook,
F. Bucci,
V. Buescher,
F. Butin
, et al. (179 additional authors not shown)
Abstract:
The NA62 experiment will begin taking data in 2015. Its primary purpose is a 10% measurement of the branching ratio of the ultrarare kaon decay $K^+ \to π^+ ν\bar{ ν}$, using the decay in flight of kaons in an unseparated beam with momentum 75 GeV/c.The detector and analysis technique are described here.
The NA62 experiment will begin taking data in 2015. Its primary purpose is a 10% measurement of the branching ratio of the ultrarare kaon decay $K^+ \to π^+ ν\bar{ ν}$, using the decay in flight of kaons in an unseparated beam with momentum 75 GeV/c.The detector and analysis technique are described here.
△ Less
Submitted 1 November, 2014;
originally announced November 2014.
-
R&D Paths of Pixel Detectors for Vertex Tracking and Radiation Imaging
Authors:
M. Battaglia,
C. Da Via,
D. Bortoletto,
R. Brenner,
M. Campbell,
P. Collins,
G. F. Dalla Betta,
P. Denes,
H. Graafsma,
I. M. Gregor,
A. Kluge,
V. Manzari,
C. Parkes,
V. Re,
P. Riedler,
G. Rizzo,
W. Snoeys,
M. Winter
Abstract:
This report reviews current trends in the R&D of semiconductor pixellated sensors for vertex tracking and radiation imaging. It identifies requirements of future HEP experiments at colliders, needed technological breakthroughs and highlights the relation to radiation detection and imaging applications in other fields of science.
This report reviews current trends in the R&D of semiconductor pixellated sensors for vertex tracking and radiation imaging. It identifies requirements of future HEP experiments at colliders, needed technological breakthroughs and highlights the relation to radiation detection and imaging applications in other fields of science.
△ Less
Submitted 1 August, 2012;
originally announced August 2012.
-
Inclusive J/psi production in pp collisions at sqrt(s) = 2.76 TeV
Authors:
ALICE Collaboration,
B. Abelev,
J. Adam,
D. Adamova,
A. M. Adare,
M. M. Aggarwal,
G. Aglieri Rinella,
A. G. Agocs,
A. Agostinelli,
S. Aguilar Salazar,
Z. Ahammed,
A. Ahmad Masoodi,
N. Ahmad,
S. U. Ahn,
A. Akindinov,
D. Aleksandrov,
B. Alessandro,
R. Alfaro Molina,
A. Alici,
A. Alkin,
E. Almaraz Avina,
J. Alme,
T. Alt,
V. Altini,
S. Altinpinar
, et al. (948 additional authors not shown)
Abstract:
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=…
▽ More
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=19.9 nb^-1, and the corresponding signal statistics are N_J/psi^e+e-=59 +/- 14 and N_J/psi^mu+mu-=1364 +/- 53. We present dsigma_J/psi/dy for the two rapidity regions under study and, for the forward-y range, d^2sigma_J/psi/dydp_t in the transverse momentum domain 0<p_t<8 GeV/c. The results are compared with previously published results at sqrt(s)=7 TeV and with theoretical calculations.
△ Less
Submitted 6 November, 2012; v1 submitted 16 March, 2012;
originally announced March 2012.
-
The pixel Fast-OR signal for the ALICE trigger in p-p collisions
Authors:
D. Elia,
G. Aglieri Rinella,
A. Kluge,
M. Krivda,
M. Nicassio
Abstract:
The silicon pixel detector of the ALICE experiment at LHC comprises the two innermost layers of the inner tracking system of the apparatus. It contains 1200 readout chips, each of them corresponding to a 8192 pixel matrix. The single chip outputs a digital Fast-OR signal which is active whenever at least one of the pixels in the matrix records a hit. The 1200 Fast-OR output signals can be used t…
▽ More
The silicon pixel detector of the ALICE experiment at LHC comprises the two innermost layers of the inner tracking system of the apparatus. It contains 1200 readout chips, each of them corresponding to a 8192 pixel matrix. The single chip outputs a digital Fast-OR signal which is active whenever at least one of the pixels in the matrix records a hit. The 1200 Fast-OR output signals can be used to implement a unique triggering capability: few details on the pixel trigger system and some of the possible applications for p-p collisions are presented.
△ Less
Submitted 14 March, 2007; v1 submitted 12 March, 2007;
originally announced March 2007.
