-
Dynamic Versus Static Oxidation of Nb/Al-AlO$_x$/Nb Trilayer
Authors:
Tannaz Farrahi,
Alan W. Kleinsasser,
Michael Cyberey,
Jie Wang,
Micahel B. Eller,
Jian Z. Zhang,
Anthony R. Kerr,
Joseph G. Lambert,
Robert M. Weikle,
Arthur W. Lichtenberger
Abstract:
High quality Nb-based superconductor-insulator-superconductor (SIS) junctions with Al oxide (AlO$_x$) tunnel barriers grown from Al overlayers are widely reported in the literature. However, the thin barriers required for high critical current density (J$_c$) junctions exhibit defects that result in significant subgap leakage current that is detrimental for many applications. High quality, high-J…
▽ More
High quality Nb-based superconductor-insulator-superconductor (SIS) junctions with Al oxide (AlO$_x$) tunnel barriers grown from Al overlayers are widely reported in the literature. However, the thin barriers required for high critical current density (J$_c$) junctions exhibit defects that result in significant subgap leakage current that is detrimental for many applications. High quality, high-J$_c$ junctions can be realized with AlN$_x$ barriers, but control of J$_c$ is more difficult than with AlO$_x$. It is therefore of interest to study the growth of thin AlO$_x$ barriers with the ultimate goal of achieving high quality, high-J$_c$ AlO$_x$ junctions. In this work, 100\%\ O$_2$ and 2\%\ O$_2$ in Ar gas mixtures are used both statically and dynamically to grow AlO$_x$ tunnel barriers over a large range of oxygen exposures. In situ ellipsometry is used for the first time to extensively measure AlO$_x$ tunnel barrier growth in real time, revealing a number of unexpected patterns. Finally, a set of test junction wafers was fabricated that exhibited the well-known dependence of J$_c$ on oxygen exposure (E) in order to further validate the experimental setup.
△ Less
Submitted 22 June, 2023;
originally announced June 2023.
-
A frequency and sensitivity tunable microresonator array for high-speed quantum processor readout
Authors:
J. D. Whittaker,
L. J. Swenson,
M. H. Volkmann,
P. Spear,
F. Altomare,
A. J. Berkley,
B. Bumble,
P. Bunyk,
P. K. Day,
B. H. Eom,
R. Harris,
J. P. Hilton,
E. Hoskinson,
M. W. Johnson,
A. Kleinsasser,
E. Ladizinsky,
T. Lanting,
T. Oh,
I. Perminov,
E. Tolkacheva,
J. Yao
Abstract:
Superconducting microresonators have been successfully utilized as detection elements for a wide variety of applications. With multiplexing factors exceeding 1,000 detectors per transmission line, they are the most scalable low-temperature detector technology demonstrated to date. For high-throughput applications, fewer detectors can be coupled to a single wire but utilize a larger per-detector ba…
▽ More
Superconducting microresonators have been successfully utilized as detection elements for a wide variety of applications. With multiplexing factors exceeding 1,000 detectors per transmission line, they are the most scalable low-temperature detector technology demonstrated to date. For high-throughput applications, fewer detectors can be coupled to a single wire but utilize a larger per-detector bandwidth. For all existing designs, fluctuations in fabrication tolerances result in a non-uniform shift in resonance frequency and sensitivity, which ultimately limits the efficiency of band-width utilization. Here we present the design, implementation, and initial characterization of a superconducting microresonator readout integrating two tunable inductances per detector. We demonstrate that these tuning elements provide independent control of both the detector frequency and sensitivity, allowing us to maximize the transmission line bandwidth utilization. Finally we discuss the integration of these detectors in a multilayer fabrication stack for high-speed readout of the D-Wave quantum processor, highlighting the use of control and routing circuitry composed of single flux-quantum loops to minimize the number of control wires at the lowest temperature stage.
△ Less
Submitted 22 April, 2016; v1 submitted 18 September, 2015;
originally announced September 2015.
-
Implementation of a Quantum Annealing Algorithm Using a Superconducting Circuit
Authors:
R. Harris,
A. J. Berkley,
J. Johansson,
M. W. Johnson,
T. Lanting,
P. Bunyk,
E. Tolkacheva,
E. Ladizinsky,
B. Bumble,
A. Fung,
A. Kaul,
A. Kleinsasser,
S. Han
Abstract:
A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two…
▽ More
A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two annealing protocols, one with and one without active compensation for the growth of the qubit persistent current during annealing, are presented in order to illustrate this point.
△ Less
Submitted 23 March, 2009;
originally announced March 2009.
-
Synchronization of Multiple Coupled rf-SQUID Flux Qubits
Authors:
R. Harris,
F. Brito,
A. J. Berkley,
J. Johansson,
M. W. Johnson,
T. Lanting,
P. Bunyk,
E. Ladizinsky,
B. Bumble,
A. Fung,
A. Kaul,
A. Kleinsasser,
S. Han
Abstract:
A practical strategy for synchronizing the properties of compound Josephson junction rf-SQUID qubits on a multiqubit chip has been demonstrated. The impacts of small ($\sim1%$) fabrication variations in qubit inductance and critical current can be minimized by the application of a custom tuned flux offset to the CJJ structure of each qubit. This strategy allows for simultaneous synchronization o…
▽ More
A practical strategy for synchronizing the properties of compound Josephson junction rf-SQUID qubits on a multiqubit chip has been demonstrated. The impacts of small ($\sim1%$) fabrication variations in qubit inductance and critical current can be minimized by the application of a custom tuned flux offset to the CJJ structure of each qubit. This strategy allows for simultaneous synchronization of the qubit persistent current and tunnel splitting over a range of external bias parameters that is relevant for the implementation of an adiabatic quantum processor.
△ Less
Submitted 10 March, 2009;
originally announced March 2009.
-
Geometrical dependence of low frequency noise in superconducting flux qubits
Authors:
T. Lanting,
A. J. Berkley,
B. Bumble,
P. Bunyk,
A. Fung,
J. Johansson,
A. Kaul,
A. Kleinsasser,
E. Ladizinsky,
F. Maibaum,
R. Harris,
M. W. Johnson,
E. Tolkacheva,
M. H. S. Amin
Abstract:
A general method for directly measuring the low-frequency flux noise (below 10 Hz) in compound Josephson junction superconducting flux qubits has been used to study a series of 85 devices of varying design. The variation in flux noise across sets of qubits with identical designs was observed to be small. However, the levels of flux noise systematically varied between qubit designs with strong de…
▽ More
A general method for directly measuring the low-frequency flux noise (below 10 Hz) in compound Josephson junction superconducting flux qubits has been used to study a series of 85 devices of varying design. The variation in flux noise across sets of qubits with identical designs was observed to be small. However, the levels of flux noise systematically varied between qubit designs with strong dependence upon qubit wiring length and wiring width. Furthermore, qubits fabricated above a superconducting ground plane yielded lower noise than qubits without such a layer. These results support the hypothesis that localized magnetic impurities in the vicinity of the qubit wiring are a key source of low frequency flux noise in superconducting devices.
△ Less
Submitted 1 December, 2008;
originally announced December 2008.
-
Probing Noise in Flux Qubits via Macroscopic Resonant Tunneling
Authors:
R. Harris,
M. W. Johnson,
S. Han,
A. J. Berkley,
J. Johansson,
P. Bunyk,
E. Ladizinsky,
S. Govorkov,
M. C. Thom,
S. Uchaikin,
B. Bumble,
A. Fung,
A. Kaul,
A. Kleinsasser,
M. H. S. Amin,
D. V. Averin
Abstract:
Macroscopic resonant tunneling between the two lowest lying states of a bistable RF-SQUID is used to characterize noise in a flux qubit. Measurements of the incoherent decay rate as a function of flux bias revealed a Gaussian shaped profile that is not peaked at the resonance point, but is shifted to a bias at which the initial well is higher than the target well. The r.m.s. amplitude of the noi…
▽ More
Macroscopic resonant tunneling between the two lowest lying states of a bistable RF-SQUID is used to characterize noise in a flux qubit. Measurements of the incoherent decay rate as a function of flux bias revealed a Gaussian shaped profile that is not peaked at the resonance point, but is shifted to a bias at which the initial well is higher than the target well. The r.m.s. amplitude of the noise, which is proportional to the decoherence rate 1/T_2^*, was observed to be weakly dependent on temperature below 70 mK. Analysis of these results indicates that the dominant source of low frequency (1/f) flux noise in this device is a quantum mechanical environment in thermal equilibrium.
△ Less
Submitted 8 February, 2008; v1 submitted 5 December, 2007;
originally announced December 2007.
