Showing 1–50 of 170 results for author: Kleiner, R

Terahertz emission from mutually synchronized standalone Bi2Sr2CaCu2O8+x intrinsic-Josephson-junction stacks

Authors: Raphael Wieland, Olcay Kizilaslan, Nickolay Kinev, Eric Dorsch, Stefan Guénon, Ziyu Song, Zihan Wei, Huabing Wang, Peiheng Wu, Dieter Koelle, Valery P. Koshelets, Reinhold Kleiner

Abstract: Suitably patterned single crystals made of the cuprate superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$ (BSCCO), intrinsically forming a stack of Josephson junctions, can generate electromagnetic radiation in the lower terahertz regime. Due to Joule heating the emission power of single stacks seems to be limited to values below 100 $μ$W. To increase the radiation power, mutually synchronized arrays si… ▽ More Suitably patterned single crystals made of the cuprate superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$ (BSCCO), intrinsically forming a stack of Josephson junctions, can generate electromagnetic radiation in the lower terahertz regime. Due to Joule heating the emission power of single stacks seems to be limited to values below 100 $μ$W. To increase the radiation power, mutually synchronized arrays situated on the same BSCCO base crystal have been studied. Mutual electromagnetic interactions via a connecting BSCCO base crystal have been considered essential for synchronization, but the approach still suffers from Joule heating, preventing the synchronization of more than three stacks. In the present paper we show, on the basis of two emitting stacks, that mutual synchronization can also be achieved by stand-alone stacks contacted by gold layers and sharing only a common gold layer. Compared to BSCCO base crystals, the gold layers have a much higher thermal conductivity and their patterning is not very problematic. We analyze our results in detail, showing that the two oscillators exhibit phase correlations over a range of $\pm$0.4 GHz relative to their center frequencies, which we mainly studied between 745 GHz and 765 GHz. However, we also find that strong phase gradients in the beams radiated from both the mutually locked stacks and the unlocked ones play an important role and, presumably, diminish the detected emission power due to destructive interference. We speculate that the effect arises from higher-order cavity modes which are excited in the individual stacks. Our main message is that the mutual interaction provided by a common gold layer may open new possibilities for relaxing the Joule-heating-problem, allowing the synchronization of a higher number of stacks. Our findings may boost attempts to substantially increase the output power levels of the BSCCO terahertz oscillators. △ Less

Submitted 31 May, 2024; originally announced May 2024.

Vector-substrate-based Josephson junctions

Authors: Yu-Jung Wu, Martin Hack, Katja Wurster, Simon Koch, Reinhold Kleiner, Dieter Koelle, Jochen Mannhart, Varun Harbola

Abstract: We present a way to We present a way to fabricate bicrystal Josephson junctions of high-Tc cuprate superconductors that does not require bulk bicrystalline substrates. Based on vector substrate technology, this novel approach makes use of a few tens-of-nanometers-thick bicrystalline membranes transferred onto conventional substrates.We demonstrate 24° YBa2Cu3O7-x Josephson junctions fabricated on… ▽ More We present a way to We present a way to fabricate bicrystal Josephson junctions of high-Tc cuprate superconductors that does not require bulk bicrystalline substrates. Based on vector substrate technology, this novel approach makes use of a few tens-of-nanometers-thick bicrystalline membranes transferred onto conventional substrates.We demonstrate 24° YBa2Cu3O7-x Josephson junctions fabricated on sapphire single crystals by utilizing 10-nm-thick bicrystalline membranes of SrTiO3. This technique allows one to manufacture bicrystalline Josephson junctions of high-Tc superconductors on a large variety of bulk substrate materials, providing novel degrees of freedom in designing the junctions and their electronic properties. It furthermore offers the capability to replace the fabrication of bulk bicrystalline substrates with thin-film growth methods △ Less

Submitted 21 April, 2024; originally announced April 2024.

Vortex matching at 6 T in YBa$_2$Cu$_3$O$_{7-δ}$ thin films by imprinting a 20 nm-periodic pinning array with a focused helium ion beam

Authors: Max Karrer, Bernd Aichner, Katja Wurster, César Magén, Christoph Schmid, Robin Hutt, Barbora Budinská, Oleksandr V. Dobrovolskiy, Reinhold Kleiner, Wolfgang Lang, Edward Goldobin, Dieter Koelle

Abstract: Controlled engineering of vortex pinning sites in copper-oxide superconductors is a critical issue in manufacturing devices based on magnetic flux quanta. To address this, we employed a focused He-ion beam (He-FIB) to irradiate thin YBa$_2$Cu$_3$O$_{7-δ}$ films and create ultradense hexagonal arrays of defects with lattice spacings as small as 20 nm. Critical current and magnetoresistance measurem… ▽ More Controlled engineering of vortex pinning sites in copper-oxide superconductors is a critical issue in manufacturing devices based on magnetic flux quanta. To address this, we employed a focused He-ion beam (He-FIB) to irradiate thin YBa$_2$Cu$_3$O$_{7-δ}$ films and create ultradense hexagonal arrays of defects with lattice spacings as small as 20 nm. Critical current and magnetoresistance measurements demonstrate efficient pinning by an unprecedentedly high matching field of 6 T visible in a huge temperature range from the critical temperature $T_c$ down to 2 K. These results show that He-FIB irradiation provides excellent opportunities for the development and application of superconducting fluxonic devices based on Abrikosov vortices. In particular, our findings suggest that such devices can operate at temperatures far below $T_c$, where superconductivity is robust. △ Less

Submitted 8 April, 2024; originally announced April 2024.

Comments: 12 pages, 7 figures

Extracting the current-phase-relation of a monolithic three-dimensional nano-constriction using a DC-current-tunable superconducting microwave cavity

Authors: Kevin Uhl, Daniel Hackenbeck, Dieter Koelle, Reinhold Kleiner, Daniel Bothner

Abstract: Superconducting circuits with nonlinear elements such as Josephson tunnel junctions or kinetic inductance nanowires are the workhorse for microwave quantum and superconducting sensing technologies. For devices, which can be operated at high temperatures and large magnetic fields, nano-constrictions as nonlinear elements are recently under intense investigation. Constrictions, however, are far less… ▽ More Superconducting circuits with nonlinear elements such as Josephson tunnel junctions or kinetic inductance nanowires are the workhorse for microwave quantum and superconducting sensing technologies. For devices, which can be operated at high temperatures and large magnetic fields, nano-constrictions as nonlinear elements are recently under intense investigation. Constrictions, however, are far less understood than conventional Josephson tunnel junctions, and their current-phase-relationships (CPRs) -- although highly important for device design -- are hard to predict. Here, we present a niobium microwave cavity with a monolithically integrated, neon-ion-beam patterned three-dimensional (3D) nano-constriction. By design, we obtain a DC-current-tunable microwave circuit and characterize how the bias-current-dependent constriction properties impact the cavity resonance. Based on the results of these experiments, we reconstruct the CPR of the nanoconstriction. Finally, we discuss the Kerr nonlinearity of the device, a parameter important for many high-dynamic-range applications and an experimental probe for the second and third derivatives of the CPR. Our platform provides a useful method to comprehensively characterize nonlinear elements integrated in microwave circuits and could be of interest for current sensors, hybrid quantum systems and parametric amplifiers. Our findings furthermore contribute to a better understanding of nano-fabricated 3D constrictions. △ Less

Submitted 15 February, 2024; originally announced February 2024.

Laser-induced quenching of metastability at the Mott-insulator to metal transition

Authors: Theodor Luibrand, Lorenzo Fratino, Farnaz Tahouni-Bonab, Amihai Kronman, Yoav Kalcheim, Ivan K. Schuller, Marcelo Rozenberg, Reinhold Kleiner, Dieter Koelle, Stefan Guénon

Abstract: There is growing interest in strongly correlated insulator thin films because the intricate interplay of their intrinsic and extrinsic state variables causes memristive behavior that might be used for bio-mimetic devices in the emerging field of neuromorphic computing. In this study we find that laser irradiation tends to drive V$_2$O$_3$ from supercooled/superheated metastable states towards ther… ▽ More There is growing interest in strongly correlated insulator thin films because the intricate interplay of their intrinsic and extrinsic state variables causes memristive behavior that might be used for bio-mimetic devices in the emerging field of neuromorphic computing. In this study we find that laser irradiation tends to drive V$_2$O$_3$ from supercooled/superheated metastable states towards thermodynamic equilibrium, most likely in a non-thermal way. We study thin films of the prototypical Mott-insulator V$_2$O$_3$, which show spontaneous phase separation into metal-insulator herringbone domains during the Mott transition. Here, we use low-temperature microscopy to investigate how these metal-insulator domains can be modified by scanning a focused laser beam across the thin film surface. We find that the response depends on the thermal history: When the thin film is heated from below the Mott transition temperature, the laser beam predominantly induces metallic domains. On the contrary, when the thin film is cooled from a temperature above the transition, the laser beam predominantly induces insulating domains. Very likely, the V$_2$O$_3$ thin film is in a superheated or supercooled state, respectively, during the first-order phase transition, and the perturbation by a laser beam drives these metastable states into stable ones. This way, the thermal history is locally erased. Our findings are supported by a phenomenological model with a laser-induced lowering of the energy barrier between the metastable and equilibrium states. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Comments: 14 pages, 10 figures

Remote sensing of a levitated superconductor with a flux-tunable microwave cavity

Authors: Philip Schmidt, Remi Claessen, Gerard Higgins, Joachim Hofer, Jannek J. Hansen, Peter Asenbaum, Kevin Uhl, Reinhold Kleiner, Rudolf Gross, Hans Huebl, Michael Trupke, Markus Aspelmeyer

Abstract: We present a cavity-electromechanical system comprising a superconducting quantum interference device which is embedded in a microwave resonator and coupled via a pick-up loop to a 6 $μ$g magnetically-levitated superconducting sphere. The motion of the sphere in the magnetic trap induces a frequency shift in the SQUID-cavity system. We use microwave spectroscopy to characterize the system, and we… ▽ More We present a cavity-electromechanical system comprising a superconducting quantum interference device which is embedded in a microwave resonator and coupled via a pick-up loop to a 6 $μ$g magnetically-levitated superconducting sphere. The motion of the sphere in the magnetic trap induces a frequency shift in the SQUID-cavity system. We use microwave spectroscopy to characterize the system, and we demonstrate that the electromechanical interaction is tunable. The measured displacement sensitivity of $10^{-7} \, \mathrm{m} / \sqrt{\mathrm{Hz}}$, defines a path towards ground-state cooling of levitated particles with Planck-scale masses at millikelvin environment temperatures. △ Less

Submitted 12 February, 2024; v1 submitted 16 January, 2024; originally announced January 2024.

On the coupling of magnetic moments to superconducting quantum interference devices

Authors: J. Linek, M. Wyszynski, B. Müller, D. Korinski, M. V. Milošević, R. Kleiner, D. Koelle

Abstract: We investigate the coupling factor $φ_μ$ that quantifies the magnetic flux $Φ$ per magnetic moment $μ$ of a point-like magnetic dipole that couples to a superconducting quantum interference device (SQUID). Representing the dipole by a current-carrying loop, the reciprocity of mutual inductances of SQUID and loop provides a way of calculating $φ_μ(\vec{r}, \vec{e}_μ)$ vs.~position $\vec{r}$ and ori… ▽ More We investigate the coupling factor $φ_μ$ that quantifies the magnetic flux $Φ$ per magnetic moment $μ$ of a point-like magnetic dipole that couples to a superconducting quantum interference device (SQUID). Representing the dipole by a current-carrying loop, the reciprocity of mutual inductances of SQUID and loop provides a way of calculating $φ_μ(\vec{r}, \vec{e}_μ)$ vs.~position $\vec{r}$ and orientation $\vec{e}_μ$ of the dipole anywhere in space from the magnetic field $B(\vec{r})$ produced by a supercurrent circulating in the SQUID loop. We use numerical simulations based on London and Ginzburg-Landau theory to calculate $φ_μ$ from the supercurrent density distributions in various SQUID geometries. We treat the far-field regime ($r\gtrsim a=$ inner size of the SQUID loop) with the dipole placed on the symmetry axis of circular or square shaped loops. We compare expressions for $φ_μ$ from filamentary loop models with simulation results for loops with finite width $w$ (outer size $A>a$), thickness $d$ and London penetration depth $λ_L$ and show that for thin ($d\ll a$) and narrow ($w < a$) loops the introduction of an effective loop size $a_{\rm eff}$ in the filamentary loop-model expressions results in agreement with simulations. For a dipole placed in the center of the loop, simulations provide an expression $φ_μ(a,A,d,λ_L)$ that covers a wide parameter range. In the near-field regime (dipole centered at small distance $z$ above one SQUID arm) only coupling to a single strip representing the SQUID arm has to be considered. Here, we compare simulations with an analytical expression derived for a homogeneous current density distribution, which yields excellent agreement for $λ_L>w,d$. Moreover, we analyze $φ_μ$ provided by the introduction of a constriction in the SQUID arm below the magnetic dipole. △ Less

Submitted 11 July, 2023; originally announced July 2023.

Why shot noise does not generally detect pairing in mesoscopic superconducting tunnel junctions

Authors: Jiasen Niu, Koen M. Bastiaans, Jianfeng Ge, Ruchi Tomar, John Jesudasan, Pratap Raychaudhuri, Max Karrer, Reinhold Kleiner, Dieter Koelle, Arnaud Barbier, Eduard F. C. Driessen, Yaroslav M. Blanter, Milan P. Allan

Abstract: The shot noise in tunneling experiments reflects the Poissonian nature of the tunneling process. The shot noise power is proportional to both the magnitude of the current and the effective charge of the carrier. Shot noise spectroscopy thus enables, in principle, to determine the effective charge q of the charge carriers that tunnel. This can be used to detect electron pairing in superconductors:… ▽ More The shot noise in tunneling experiments reflects the Poissonian nature of the tunneling process. The shot noise power is proportional to both the magnitude of the current and the effective charge of the carrier. Shot noise spectroscopy thus enables, in principle, to determine the effective charge q of the charge carriers that tunnel. This can be used to detect electron pairing in superconductors: in the normal state, the noise corresponds to single electron tunneling (q = 1e), while in the paired state, the noise corresponds to q = 2e. Here, we use a newly developed amplifier to reveal that in typical mesoscopic superconducting junctions, the shot noise does not reflect the signatures of pairing and instead stays at a level corresponding to q = 1e. We show that transparency can control the shot noise and this q = 1e is due to the large number of tunneling channels with each having very low transparency. Our results indicate that in typical mesoscopic superconducting junctions one should expect q = 1e noise, and lead to design guidelines for junctions that allow the detection of electron pairing. △ Less

Submitted 15 March, 2024; v1 submitted 4 June, 2023; originally announced June 2023.

Journal ref: Phys. Rev. Lett. 132, 076001 (2024)

Niobium Quantum Interference Microwave Circuits with Monolithic Three-Dimensional (3D) Nanobridge Junctions

Authors: Kevin Uhl, Daniel Hackenbeck, Janis Peter, Reinhold Kleiner, Dieter Koelle, Daniel Bothner

Abstract: Nonlinear microwave circuits are key elements for many groundbreaking research directions and technologies, such as quantum computation and quantum sensing. The majority of microwave circuits with Josephson nonlinearities to date is based on aluminum thin films, and therefore they are severely restricted in their operation range regarding temperatures and external magnetic fields. Here, we present… ▽ More Nonlinear microwave circuits are key elements for many groundbreaking research directions and technologies, such as quantum computation and quantum sensing. The majority of microwave circuits with Josephson nonlinearities to date is based on aluminum thin films, and therefore they are severely restricted in their operation range regarding temperatures and external magnetic fields. Here, we present the realization of superconducting niobium microwave resonators with integrated, three-dimensional (3D) nanobridge-based superconducting quantum interference devices. The 3D nanobridges (constriction weak links) are monolithically patterned into pre-fabricated microwave LC circuits using neon ion beam milling, and the resulting quantum interference circuits show frequency tunabilities, flux responsivities and Kerr nonlinearities on par with comparable aluminum nanobridge devices, but with the perspective of a much larger operation parameter regime. Our results reveal great potential for application of these circuits in hybrid systems with e.g. magnons and spin ensembles or in flux-mediated optomechanics. △ Less

Submitted 25 May, 2023; originally announced May 2023.

Temporal evolution of electric transport properties of YBCO Josephson junctions produced by focused Helium ion beam irradiation

Authors: M. Karrer, K. Wurster, J. Linek, M. Meichsner, R. Kleiner, E. Goldobin, D. Koelle

Abstract: Using a $30\,\mathrm{keV}$ focused He ion beam (He-FIB) with a wide range of irradiation doses $D=100$ to $1000\,\mathrm{ions/nm}$ we fabricated Josephson and resistive barriers within microbridges of epitaxially grown single crystalline YBCO thin films and investigated the change of their electric transport properties with time. One set of samples (#1A) was simply stored at room temperature under… ▽ More Using a $30\,\mathrm{keV}$ focused He ion beam (He-FIB) with a wide range of irradiation doses $D=100$ to $1000\,\mathrm{ions/nm}$ we fabricated Josephson and resistive barriers within microbridges of epitaxially grown single crystalline YBCO thin films and investigated the change of their electric transport properties with time. One set of samples (#1A) was simply stored at room temperature under nitrogen atmosphere. A second set (#2D) was post-annealed at $90^\circ\,\mathrm{C}$ using high oxygen pressures and a third set (#2E) at low oxygen pressures. We found that for #1A the critical current density $j_c$ at $4.2\,\mathrm{K}$ changes as $j_c\propto\exp(-\sqrt{t/τ})$ with time $t$, where the relaxation times $τ$ increases exponentially with $D$, which can be described within a limited diffusion based model. In order to increase the diffusion rate we annealed the junctions from #2D at $90^\circ\,\mathrm{C}$ for $30\,\mathrm{min}$ in oxygen environment. Directly after annealing the critical current density $j_c$ increased, while the normal state resistance $R_n$ decreased. Repeated measurements showed that within a week the junctions relaxed to a quasi-stable state, in which the time scale for junction parameter variations increased to several weeks, making this a feasible option to achieve temporal stability of parameters of He-FIB Josephson junctions in YBCO. △ Less

Submitted 5 April, 2023; originally announced April 2023.

Angle-dependent Magnetoresistance of an Ordered Bose Glass of Vortices in YBa$_{2}$Cu$_{3}$O$_{7-δ}$ Thin Films with a Periodic Pinning~Lattice

Authors: Bernd Aichner, Lucas Backmeister, Max Karrer, Katja Wurster, Reinhold Kleiner, Edward Goldobin, Dieter Koelle, Wolfgang Lang

Abstract: The competition between intrinsic disorder in superconducting YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) thin films and an ultradense triangular lattice of cylindrical pinning centers spaced at 30 nm intervals results in an ordered Bose glass phase of vortices. The samples were created by scanning the focused beam of a helium-ion microscope over the surface of the YBCO thin film to form columns of point de… ▽ More The competition between intrinsic disorder in superconducting YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) thin films and an ultradense triangular lattice of cylindrical pinning centers spaced at 30 nm intervals results in an ordered Bose glass phase of vortices. The samples were created by scanning the focused beam of a helium-ion microscope over the surface of the YBCO thin film to form columns of point defects where superconductivity was locally suppressed. The voltage-current isotherms reveal critical behavior and scale in the vicinity of the second-order glass transition. The latter exhibits a distinct peak in melting temperature ($T_g$) vs. applied magnetic field ($B_a$) at the magnetic commensurability field, along with a sharp rise in the lifetimes of glassy fluctuations. Angle-dependent magnetoresistance measurements in constant-Lorentz-force geometry unveil a strong increase in anisotropy compared to a pristine reference film where the density of vortices matches that of the columnar defects. The pinning is therefore, dominated by the magnetic-field component parallel to the columnar defects, exposing its one-dimensional character. These results support the idea of an ordered Bose glass phase. △ Less

Submitted 28 March, 2023; originally announced March 2023.

Comments: 9 pages, 4 figures

Journal ref: Condensed Matter 8(2), 32 (2023)

Characteristic lengthscales of the electrically-induced insulator-to-metal transition

Authors: Theodor Luibrand, Adrien Bercher, Rodolfo Rocco, Farnaz Tahouni-Bonab, Lucia Varbaro, Carl Willem Rischau, Claribel Domínguez, Yixi Zhou, Weiwei Luo, Soumen Bag, Lorenzo Fratino, Reinhold Kleiner, Stefano Gariglio, Dieter Koelle, Jean-Marc Triscone, Marcelo J. Rozenberg, Alexey B. Kuzmenko, Stefan Guénon, Javier del Valle

Abstract: Some correlated materials display an insulator-to-metal transition as the temperature is increased. In most cases this transition can also be induced electrically, resulting in volatile resistive switching due to the formation of a conducting filament. While this phenomenon has attracted much attention due to potential applications, many fundamental questions remain unaddressed. One of them is its… ▽ More Some correlated materials display an insulator-to-metal transition as the temperature is increased. In most cases this transition can also be induced electrically, resulting in volatile resistive switching due to the formation of a conducting filament. While this phenomenon has attracted much attention due to potential applications, many fundamental questions remain unaddressed. One of them is its characteristic lengths: what sets the size of these filaments, and how does this impact resistive switching properties. Here we use a combination of wide-field and scattering-type scanning near-field optical microscopies to characterize filament formation in NdNiO3 and SmNiO3 thin films. We find a clear trend: smaller filaments increase the current density, yielding sharper switching and a larger resistive drop. With the aid of numerical simulations, we discuss the parameters controlling the filament width and, hence, the switching properties. △ Less

Submitted 1 January, 2023; originally announced January 2023.

High-Q magnetic levitation and control of superconducting microspheres at millikelvin temperatures

Authors: Joachim Hofer, Rudolf Gross, Gerard Higgins, Hans Huebl, Oliver F. Kieler, Reinhold Kleiner, Dieter Koelle, Philip Schmidt, Joshua A. Slater, Michael Trupke, Kevin Uhl, Thomas Weimann, Witlef Wieczorek, Markus Aspelmeyer

Abstract: We report the levitation of a superconducting lead-tin sphere with 100 micrometer diameter (corresponding to a mass of 5.6 micrograms) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 hertz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well… ▽ More We report the levitation of a superconducting lead-tin sphere with 100 micrometer diameter (corresponding to a mass of 5.6 micrograms) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 hertz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.6e7. We also demonstrate 3D magnetic feedback control of the sphere's motion. The setup is housed in a dilution refrigerator operating at 15 millikelvin. By implementing a cryogenic vibration isolation system we can attenuate environmental vibrations at 200 hertz by approximately seven orders of magnitude. The combination of low temperature, large mass and high quality factor as well as adjustable resonance frequencies provides a promising platform for testing quantum physics in previously unexplored regimes with high mass and long coherence times. △ Less

Submitted 1 August, 2023; v1 submitted 11 November, 2022; originally announced November 2022.

Comments: Updated to published version

Journal ref: Physical Review Letters 131, 043603 (2023)

Ordered Bose Glass of Vortices in Superconducting YBa$_{2}$Cu$_{3}$O$_{7-δ}$ Thin Films with a Periodic Pin Lattice Created by Focused Helium Ion Irradiation

Authors: Lucas Backmeister, Bernd Aichner, Max Karrer, Katja Wurster, Reinhold Kleiner, Edward Goldobin, Dieter Koelle, Wolfgang Lang

Abstract: The defect-rich morphology of YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) thin films leads to a glass-like arrangement of Abrikosov vortices which causes the resistance to disappear in vanishing current densities. This vortex glass consists of entangled vortex lines and is identified by a characteristic scaling of the voltage-current isotherms. Randomly distributed columnar defects stratify the vortex lines… ▽ More The defect-rich morphology of YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) thin films leads to a glass-like arrangement of Abrikosov vortices which causes the resistance to disappear in vanishing current densities. This vortex glass consists of entangled vortex lines and is identified by a characteristic scaling of the voltage-current isotherms. Randomly distributed columnar defects stratify the vortex lines and lead to a Bose glass. Here, we report on the observation of an ordered Bose glass in a YBCO thin film with a hexagonal array of columnar defects with 30 nm spacings. The periodic pinning landscape was engineered by a focused beam of 30 keV He$^+$ ions in a helium-ion microscope. △ Less

Submitted 6 October, 2022; originally announced October 2022.

Comments: 10 pages, 4 figures

Journal ref: Nanomaterials 12 (2022) 3491

Combining Electron Spin Resonance Spectroscopy with Scanning Tunneling Microscopy at High Magnetic Fields

Authors: Robert Drost, Maximilian Uhl, Piotr Kot, Janis Siebrecht, Alexander Schmid, Jonas Merkt, Stefan Wünsch, Michael Siegel, Oliver Kieler, Reinhold Kleiner, Christian R. Ast

Abstract: Magnetic media remain a key in information storage and processing. The continuous increase of storage densities and the desire for quantum memories and computers pushes the limits of magnetic characterisation techniques. Ultimately, a tool which is capable of coherently manipulating and detecting individual quantum spins is needed. The scanning tunnelling microscope (STM) is the only technique whi… ▽ More Magnetic media remain a key in information storage and processing. The continuous increase of storage densities and the desire for quantum memories and computers pushes the limits of magnetic characterisation techniques. Ultimately, a tool which is capable of coherently manipulating and detecting individual quantum spins is needed. The scanning tunnelling microscope (STM) is the only technique which unites the prerequisites of high spatial and energy resolution, low temperature and high magnetic fields to achieve this goal. Limitations in the available frequency range for electron spin resonance STM (ESR-STM) mean that many instruments operate in the thermal noise regime. We resolve challenges in signal delivery to extend the operational frequency range of ESR-STM by more than a factor of two and up to 100GHz, making the Zeeman energy the dominant energy scale at achievable cryogenic temperatures of a few hundred millikelvin. We present a general method for augmenting existing instruments into ESR-STMs to investigate spin dynamics in the high-field limit. We demonstrate the performance of the instrument by analysing inelastic tunnelling in a junction driven by a microwave signal and provide proof of principle measurements for ESR-STM. △ Less

Submitted 10 November, 2021; originally announced November 2021.

Comments: 8 pages, 7 figures

Journal ref: Rev. Sci. Instr. 93, 043705 (2022)

Cavity driven Rabi oscillations between Rydberg states of atoms trapped on a superconducting atom chip

Authors: Manuel Kaiser, Conny Glaser, Li Yuan Ley, Jens Grimmel, Helge Hattermann, Daniel Bothner, Dieter Koelle, Reinhold Kleiner, David Petrosyan, Andreas Günther, József Fortágh

Abstract: Hybrid quantum systems involving cold atoms and microwave resonators can enable cavity-mediated infinite-range interactions between atomic spin systems and realize atomic quantum memories and transducers for microwave to optical conversion. To achieve strong coupling of atoms to on-chip microwave resonators, it was suggested to use atomic Rydberg states with strong electric dipole transitions. Her… ▽ More Hybrid quantum systems involving cold atoms and microwave resonators can enable cavity-mediated infinite-range interactions between atomic spin systems and realize atomic quantum memories and transducers for microwave to optical conversion. To achieve strong coupling of atoms to on-chip microwave resonators, it was suggested to use atomic Rydberg states with strong electric dipole transitions. Here we report on the realization of coherent coupling of a Rydberg transition of ultracold atoms trapped on an integrated superconducting atom chip to the microwave field of an on-chip coplanar waveguide resonator. We observe and characterize the cavity driven Rabi oscillations between a pair of Rydberg states of atoms in an inhomogeneous electric field near the chip surface. Our studies demonstrate the feasibility, but also reveal the challenges, of coherent state manipulation of Rydberg atoms interacting with superconducting circuits. △ Less

Submitted 11 May, 2021; originally announced May 2021.

Comments: 12 pages, 4 figures

Space-time crystalline order of a high-critical-temperature superconductor with intrinsic Josephson junctions

Authors: Reinhold Kleiner, Xian**g Zhou, Eric Dorsch, Xufeng Zhang, Dieter Koelle, Dafei **

Abstract: We theoretically demonstrate that the high-critical-temperature superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$ (BSCCO) is a natural candidate for the recently envisioned classical space-time crystal. BSCCO intrinsically forms a stack of Josephson junctions. Under a periodic parametric modulation of the Josephson critical current density, the Josephson currents develop coupled space-time crystalline… ▽ More We theoretically demonstrate that the high-critical-temperature superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$ (BSCCO) is a natural candidate for the recently envisioned classical space-time crystal. BSCCO intrinsically forms a stack of Josephson junctions. Under a periodic parametric modulation of the Josephson critical current density, the Josephson currents develop coupled space-time crystalline order, breaking the continuous translational symmetry in both space and time. The modulation frequency and amplitude span a (nonequilibrium) phase diagram for a so-defined spatiotemporal order parameter, which displays rigid pattern formation within a particular region of the phase diagram. Based on our calculations using representative material properties, we propose a laser-modulation experiment to realize the predicted space-time crystalline behavior. Our findings bring new insight into the nature of space-time crystals and, more generally, into nonequilibrium driven condensed matter systems. △ Less

Submitted 4 October, 2021; v1 submitted 2 December, 2020; originally announced December 2020.

Comments: 12 pages, 7 figures

Optical imaging of strain-mediated phase coexistence during electrothermal switching in a Mott insulator

Authors: Matthias Lange, Stefan Guénon, Yoav Kalcheim, Theodor Luibrand, Nicolas Manuel Vargas, Dennis Schwebius, Reinhold Kleiner, Ivan K. Schuller, Dieter Koelle

Abstract: Resistive-switching -- the current-/voltage-induced electrical resistance change -- is at the core of memristive devices, which play an essential role in the emerging field of neuromorphic computing. This study is about resistive switching in a Mott-insulator, which undergoes a thermally driven metal-to-insulator transition. Two distinct switching mechanisms were reported for such a system: electr… ▽ More Resistive-switching -- the current-/voltage-induced electrical resistance change -- is at the core of memristive devices, which play an essential role in the emerging field of neuromorphic computing. This study is about resistive switching in a Mott-insulator, which undergoes a thermally driven metal-to-insulator transition. Two distinct switching mechanisms were reported for such a system: electric-field-driven resistive switching and electrothermal resistive switching. The latter results from an instability caused by Joule heating. Here, we present the visualization of the reversible resistive switching in a planar V$_2$O$_3$ thin-film device using high-resolution wide-field microscopy in combination with electric transport measurements. We investigate the interaction of the electrothermal instability with the strain-induced spontaneous phase-separation in the V$_2$O$_3$ thin film at the Mott-transition. The photomicrographs show the formation of a narrow metallic filament with a minimum width $\lesssim$ 500\,nm. Although the filament formation and the overall shape of the current-voltage characteristics (IVCs) are typical of an electrothermal breakdown, we also observe atypical effects like oblique filaments, filament splitting, and hysteretic IVCs with sawtooth-like jumps at high currents in the low-resistance regime. We were able to reproduce the experimental results in a numerical model based on a two-dimensional resistor network. This model demonstrates that resistive switching, in this case, is indeed electrothermal and that the intrinsic heterogeneity is responsible for the atypical effects. This heterogeneity is strongly influenced by strain, thereby establishing a link between switching dynamics and structural properties. △ Less

Submitted 17 June, 2021; v1 submitted 26 September, 2020; originally announced September 2020.

Comments: (18 pages, 12 figures)

Impedance spectroscopy of ferroelectrics: The domain wall pinning element

Authors: M. Becker, C. J. Burkhardt, R. Kleiner, D. Koelle

Abstract: We introduce an equivalent-circuit element based on the theory of interface pinning in random systems, to analyze the contribution of domain wall motion below the coercive field to the impedance of a ferroelectric, as a function of amplitude $E_0$ and frequency $f$ of an applied ac electric field. We investigate capacitor stacks, containing ferroelectric 0.5(Ba$_{0.7}$Ca$_{0.3}$)TiO$_{3}$--0.5Ba(Z… ▽ More We introduce an equivalent-circuit element based on the theory of interface pinning in random systems, to analyze the contribution of domain wall motion below the coercive field to the impedance of a ferroelectric, as a function of amplitude $E_0$ and frequency $f$ of an applied ac electric field. We investigate capacitor stacks, containing ferroelectric 0.5(Ba$_{0.7}$Ca$_{0.3}$)TiO$_{3}$--0.5Ba(Zr$_{0.2}$Ti$_{0.8}$)O$_{3}$ (BCZT) thin films, epitaxially grown by pulsed laser deposition on Nb-doped SrTiO$_3$ single crystal substrates and covered with Au electrodes. Impedance spectra from $f=10$\,Hz to 1\,MHz were collected at different $E_0$. Deconvolution of the spectra is achieved by fitting the measured impedance with an equivalent-circuit model of the capacitor stacks, and we extract the domain-wall-motion induced amplitude- and frequency-dependent dielectric response of the BCZT films from the obtained fit parameters. From an extended Rayleigh analysis, we quantify the coupling strength between dielectric nonlinearity and dielectric dispersion in the BCZT films and identify different domain-wall-motion regimes. Finally, we construct a schematic diagram of the different domain-wall-motion regimes and discuss the corresponding domain-wall dynamics. △ Less

Submitted 9 March, 2021; v1 submitted 11 August, 2020; originally announced August 2020.

NanoSQUIDs from YBa$_2$Cu$_3$O$_7$/SrTiO$_3$ superlattices with bicrystal grain boundary Josephson junctions

Authors: J. Lin, J. Linek, R. Kleiner, D. Koelle

Abstract: We report on the fabrication and characterization of nanopatterned dc SQUIDs with grain boundary Josephson junctions based on heteroepitaxially grown YBa$_2$Cu$_3$O$_7$ (YBCO)/ SiTrO$_3$ (STO) superlattices on STO bicrystal substrates. Nanopatterning is performed by Ga focused-ion-beam milling. The electric transport properties and thermal white flux noise of superlattice nanoSQUIDs are comparable… ▽ More We report on the fabrication and characterization of nanopatterned dc SQUIDs with grain boundary Josephson junctions based on heteroepitaxially grown YBa$_2$Cu$_3$O$_7$ (YBCO)/ SiTrO$_3$ (STO) superlattices on STO bicrystal substrates. Nanopatterning is performed by Ga focused-ion-beam milling. The electric transport properties and thermal white flux noise of superlattice nanoSQUIDs are comparable to single layer YBCO devices on STO bicrystals. However, we find that the superlattice nanoSQUIDs have more than an order of magnitude smaller low-frequency excess flux noise, with root-mean-square spectral density $S_Φ^{1/2}\sim 5-6\,μΦ_0/\sqrt{\rm Hz}$ at 1 Hz ($Φ_0$ is the magnetic flux quantum). We attribute this improvement to an improved microstructure at the grain boundaries forming the Josephson junctions in our YBCO nanoSQUDs. △ Less

Submitted 21 July, 2020; originally announced July 2020.

Comments: 9 pages, 7 figures

Angular magnetic-field dependence of vortex matching in pinning lattices fabricated by focused or masked helium ion beam irradiation of superconducting YBa$_2$Cu$_3$O$_{7-δ}$ thin films

Authors: Bernd Aichner, Kristijan L. Mletschnig, Benedikt Müller, Max Karrer, Meirzhan Dosmailov, Johannes D. Pedarnig, Reinhold Kleiner, Dieter Koelle, Wolfgang Lang

Abstract: The angular dependence of magnetic-field commensurability effects in thin films of the cuprate high-critical-temperature superconductor YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) with an artificial pinning landscape is investigated. Columns of point defects are fabricated by two different methods of ion irradiation -- scanning the focused 30 keV ion beam in a helium ion microscope or employing the wide-fie… ▽ More The angular dependence of magnetic-field commensurability effects in thin films of the cuprate high-critical-temperature superconductor YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) with an artificial pinning landscape is investigated. Columns of point defects are fabricated by two different methods of ion irradiation -- scanning the focused 30 keV ion beam in a helium ion microscope or employing the wide-field 75 keV He$^+$ beam of an ion implanter through a stencil mask. Simulations of the ion-target interactions and the resulting collision cascades reveal that with both methods square arrays of defect columns with sub-$μ$m spacings can be created. They consist of dense point-defect clusters, which act as pinning centers for Abrikosov vortices. This is verified by the measurement of commensurable peaks of the critical current and related minima of the flux-flow resistance vs magnetic field at the matching fields. In oblique magnetic fields the matching features are exclusively governed by the component of the magnetic field parallel to the axes of the columnar defects, which confirms that the magnetic flux is penetrated along the defect columns. We demonstrate that the latter dominate the pinning landscape despite of the strong intrinsic pinning in thin YBCO films. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Comments: 8 pages, 6 figures

Journal ref: Low Temp. Phys. 46 (2020) 331; Fiz. Nizk. Temp. 46 (2020) 402

Direct visualization of phase-locking of large Josephson junction arrays by surface electromagnetic waves

Authors: M. A. Galin, F. Rudau, E. A. Borodianskyi, V. V. Kurin, D. Koelle, R. Kleiner, V. M. Krasnov, A. M. Klushin

Abstract: Phase-locking of oscillators leads to superradiant amplification of the emission power. This is particularly important for development of THz sources, which suffer from low emission efficacy. In this work we study large Josephson junction arrays containing several thousands of Nb-based junctions. Using low-temperature scanning laser microscopy we observe that at certain bias conditions two-dimensi… ▽ More Phase-locking of oscillators leads to superradiant amplification of the emission power. This is particularly important for development of THz sources, which suffer from low emission efficacy. In this work we study large Josephson junction arrays containing several thousands of Nb-based junctions. Using low-temperature scanning laser microscopy we observe that at certain bias conditions two-dimensional standing-wave patterns are formed, manifesting global synchronization of the arrays. Analysis of standing waves indicates that they are formed by surface plasmon type electromagnetic waves propagating at the electrode/substrate interface. Thus we demonstrate that surface waves provide an effective mechanism for long-range coupling and phase-locking of large junction arrays. △ Less

Submitted 14 April, 2020; originally announced April 2020.

Comments: 6 pages, 3 Figures

Journal ref: Phys. Rev. Applied 14, 024051 (2020)

On-chip sensing of hotspots in superconducting terahertz emitters

Authors: Xian**g Zhou, Xu Han, Dieter Koelle, Reinhold Kleiner, Xufeng Zhang, Dafei **

Abstract: Intrinsic Josephson junctions in high-temperature superconductor Bi2Sr2CaCu2O8 are known for their capability to emit high-power terahertz photons with widely tunable frequencies. Hotspots, as inhomogeneous temperature distributions across the junctions, are believed to play a critical role in synchronizing the gauge-invariant phase difference among the junctions, so as to achieve coherent strong… ▽ More Intrinsic Josephson junctions in high-temperature superconductor Bi2Sr2CaCu2O8 are known for their capability to emit high-power terahertz photons with widely tunable frequencies. Hotspots, as inhomogeneous temperature distributions across the junctions, are believed to play a critical role in synchronizing the gauge-invariant phase difference among the junctions, so as to achieve coherent strong emission. Previous optical imaging techniques have indirectly suggested that the hotspot temperature can go higher than the superconductor critical temperature. However, such optical approaches often disturb the local temperature profile and are too slow for device applications. In this paper, we demonstrate an on-chip in situ sensing technique that can precisely quantify the local temperature profile. This is achieved by fabricating a series of micro "sensor" junctions on top of an "emitter" junction and measuring the critical current on the sensors versus the bias current applied to the emitter. This fully electronic on-chip design could enable efficient close-loop control of hotspots in BSCCO junctions and significantly enhance the functionality of superconducting terahertz emitters. △ Less

Submitted 13 January, 2020; originally announced January 2020.

Comments: 6 pages, 5 figures

Characterizing dielectric properties of ultra-thin films using superconducting coplanar microwave resonators

Authors: Nikolaj G. Ebensperger, Benedikt Ferdinand, Dieter Koelle, Reinhold Kleiner, Martin Dressel, Marc Scheffler

Abstract: We present an experimental approach for cryogenic dielectric measurements on ultra-thin insulating films. Based on a coplanar microwave waveguide design we implement superconducting quarter-wave resonators with inductive coupling, which allows us to determine the real part $\varepsilon_1$ of the dielectric function at GHz frequencies and for sample thicknesses down to a few nm. We perform simulati… ▽ More We present an experimental approach for cryogenic dielectric measurements on ultra-thin insulating films. Based on a coplanar microwave waveguide design we implement superconducting quarter-wave resonators with inductive coupling, which allows us to determine the real part $\varepsilon_1$ of the dielectric function at GHz frequencies and for sample thicknesses down to a few nm. We perform simulations to optimize resonator coupling and sensitivity, and we demonstrate the possibility to quantify $\varepsilon_1$ with a conformal map** technique in a wide sample-thickness and $\varepsilon_1$-regime. Experimentally we determine $\varepsilon_1$ for various thin-film samples (photoresist, MgF$_2$, and SiO$_2$) in the thickness regime of nm up to $μm$. We find good correspondence with nominative values and we identify the precision of the film thickness as our predominant error source. Additionally we present a temperature-dependent measurement for a SrTiO$_3$ bulk sample, using an in-situ reference method to compensate for the temperature dependence of the superconducting resonator properties. △ Less

Submitted 4 November, 2019; v1 submitted 28 June, 2019; originally announced June 2019.

Journal ref: Review of Scientific Instruments 90, 114701 (2019)

Ultradense Tailored Vortex Pinning Arrays in Superconducting YBa$_2$Cu$_3$O$_{7-δ}$ Thin Films Created by Focused He Ion Beam Irradiation for Fluxonics Applications

Authors: Bernd Aichner, Benedikt Müller, Max Karrer, Vyacheslav R. Misko, Fabienne Limberger, Kristijan L. Mletschnig, Meirzhan Dosmailov, Johannes D. Pedarnig, Franco Nori, Reinhold Kleiner, Dieter Koelle, Wolfgang Lang

Abstract: Magnetic fields penetrate a type-II superconductor as magnetic flux quanta, called vortices. In a clean superconductor they arrange in a hexagonal lattice, while by adding periodic artificial pinning centers many other arrangements can be realized. Using the focused beam of a helium ion microscope we have fabricated periodic patterns of dense pinning centers with spacings as small as 70 nm in thin… ▽ More Magnetic fields penetrate a type-II superconductor as magnetic flux quanta, called vortices. In a clean superconductor they arrange in a hexagonal lattice, while by adding periodic artificial pinning centers many other arrangements can be realized. Using the focused beam of a helium ion microscope we have fabricated periodic patterns of dense pinning centers with spacings as small as 70 nm in thin films of the cuprate superconductor YBa$_{2}$Cu$_{3}$O$_{7-δ}$. In these ultradense kagomé-like patterns, the voids lead to magnetic caging of vortices, resulting in unconventional commensurability effects that manifest themselves as peaks in the critical current and minima in the resistance versus applied magnetic field up to $\sim 0.4\,$T. The various vortex patterns at different magnetic fields are analyzed by molecular dynamics simulations of vortex motion, and the magnetic field dependence of the critical current is confirmed. These findings open the way for a controlled manipulation of vortices in cuprate superconductors by artificial sub-100 nm pinning landscapes. △ Less

Submitted 27 August, 2019; v1 submitted 22 May, 2019; originally announced May 2019.

Comments: Minor additions

Journal ref: ACS Appl. Nano Mater. 2019, 2, 5108-5115

Simultaneous observation of high order multiple quantum coherences at ultralow magnetic fields

Authors: K. Buckenmaier, K. Scheffler, M. Plaumann, P. Fehling, J. Bernarding, M. Rudolph, C. Back, D. Koelle, R. Kleiner, J. -B. Hövener, A. N. Pravdivtsev

Abstract: We present a method for the simultaneous observation of heteronuclear multi-quantum coherences (up to the 3rd order), which give an additional degree of freedom for ultralow magnetic field (ULF) MR experiments, where the chemical shift is negligible. The nonequilibrium spin state is generated by Signal Amplification By Reversible Exchange (SABRE) and detected at ULF with SQUID-based NMR. We compar… ▽ More We present a method for the simultaneous observation of heteronuclear multi-quantum coherences (up to the 3rd order), which give an additional degree of freedom for ultralow magnetic field (ULF) MR experiments, where the chemical shift is negligible. The nonequilibrium spin state is generated by Signal Amplification By Reversible Exchange (SABRE) and detected at ULF with SQUID-based NMR. We compare the results obtained by the heteronuclei Correlated SpectroscopY (COSY) with a Flip Angle FOurier Series (FAFOS) method. COSY allows a quantitative analysis of homo- and heteronuclei quantum coherences. △ Less

Submitted 7 May, 2019; originally announced May 2019.

Josephson junctions and SQUIDs created by focused helium ion beam irradiation of YBa$_2$Cu$_3$O$_7$

Authors: B. Müller, M. Karrer, F. Limberger, M. Becker, B. Schröppel, C. J. Burkhardt, R. Kleiner, E. Goldobin, D. Koelle

Abstract: By scanning with a $30\, \mathrm{keV}$ focused He ion beam (He-FIB) across YBa$_2$Cu$_3$O$_7$ (YBCO) thin film microbridges, we create Josephson barriers with critical current density $j_\mathrm{c}$ adjustable by irradiation dose $D$. The dependence $j_\mathrm{c} (D)$ yields an exponential decay. At $4.2\, \mathrm{K}$, a transition from flux-flow to Josephson behavior occurs when $j_\mathrm{c}$ de… ▽ More By scanning with a $30\, \mathrm{keV}$ focused He ion beam (He-FIB) across YBa$_2$Cu$_3$O$_7$ (YBCO) thin film microbridges, we create Josephson barriers with critical current density $j_\mathrm{c}$ adjustable by irradiation dose $D$. The dependence $j_\mathrm{c} (D)$ yields an exponential decay. At $4.2\, \mathrm{K}$, a transition from flux-flow to Josephson behavior occurs when $j_\mathrm{c}$ decreases below $\approx 2\, \mathrm{MA/cm^2}$. The Josephson junctions exhibit current-voltage characteristics (IVCs) that are well described by the resistively and capacitively shunted junction model, without excess current for characteristic voltages $V_\mathrm{c} \lesssim 1\, \mathrm{mV}$. Devices on MgO and LSAT substrates show non-hysteretic IVCs, while devices on SrTiO$_3$ show a small hysteresis. For all junctions an approximate scaling $V_\mathrm{c} \propto j_\mathrm{c}^{1/2}$ is found. He-FIB irradiation with high dose produces barriers with $j_\mathrm{c}=0$ and high resistances of $10\, \mathrm{kΩ} \ldots 1\, \mathrm{GΩ}$. This provides the possibility to write highly resistive walls or areas into YBCO using a He-FIB. Transmission electron microscopy reveals an amorphous phase within the walls, whereas for lower doses the YBCO stays crystalline. We have also ``drawn'' superconducting quantum interference devices (SQUIDs) by using a He-FIB for definition of the SQUID hole and the junctions. The SQUIDs show high performance, with flux noise $< 500\, \mathrm{n Φ_0/Hz^{1/2}}$ in the thermal white noise limit for a device with $19\, \mathrm{pH}$ inductance. △ Less

Submitted 29 April, 2019; v1 submitted 23 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. Applied 11, 044082 (2019)

Superconducting coplanar microwave resonators with operating frequencies up to 50 GHz

Authors: Desirée S. Rausch, Markus Thiemann, Martin Dressel, Daniel Bothner, Dieter Koelle, Reinhold Kleiner, Marc Scheffler

Abstract: We demonstrate the operation of superconducting coplanar microwave resonators in a very large frequency range up to 50 GHz. The resonators are fabricated from niobium thin films on sapphire substrates and optimized for these high frequencies by small chip sizes. We study numerous harmonics of the resonators at temperatures between 1.5 K and 6 K, and we determine quality factors of up to 25000 at 1… ▽ More We demonstrate the operation of superconducting coplanar microwave resonators in a very large frequency range up to 50 GHz. The resonators are fabricated from niobium thin films on sapphire substrates and optimized for these high frequencies by small chip sizes. We study numerous harmonics of the resonators at temperatures between 1.5 K and 6 K, and we determine quality factors of up to 25000 at 1.5 K. As an example for spectroscopy applications of such resonators we detect the superconducting transition of a bulk tin sample at multiple probing frequencies. △ Less

Submitted 8 August, 2018; originally announced August 2018.

Comments: 6 pages, 3 figures

Journal ref: J. Phys. D: Appl. Phys. 51, 465301 (2018)

Tunable superconducting two-chip lumped element resonator

Authors: Benedikt Ferdinand, Daniel Bothner, Reinhold Kleiner, Dieter Koelle

Abstract: We have fabricated and investigated a stacked two-chip device, consisting of a lumped element resonator on one chip, which is side-coupled to a coplanar waveguide transmission line on a second chip. We present a full model to predict the behavior of the device dependent on the position of the lumped element resonator with respect to the transmission line. We identify different regimes, in which th… ▽ More We have fabricated and investigated a stacked two-chip device, consisting of a lumped element resonator on one chip, which is side-coupled to a coplanar waveguide transmission line on a second chip. We present a full model to predict the behavior of the device dependent on the position of the lumped element resonator with respect to the transmission line. We identify different regimes, in which the device can be operated. One of them can be used to tune the coupling between the two subsystems. Another regime enables frequency tunability of the device, without leaving the over-coupled limit for internal quality factors of about $10^4$, while in the last regime the resonator properties are insensitive against small variations of the position. Finally, we have measured the transmission characteristics of the resonator for different positions, demonstrating a good agreement with the model. △ Less

Submitted 2 August, 2018; originally announced August 2018.

Comments: 8 pages, 4 figures plus supplemental material (5 pages, 4 figures)

Journal ref: Phys. Rev. Applied 11, 034050 (2019)

Real-space probing of the local magnetic response of thin-film superconductors using single spin magnetometry

Authors: D. Rohner, L. Thiel, B. Müller, M. Kasperczyk, R. Kleiner, D. Koelle, P. Maletinsky

Abstract: We report on direct, real-space imaging of the stray magnetic field above a micro-scale disc of a thin film of the high-temperature superconductor YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) using scanning single spin magnetometry. Our experiments yield a direct measurement of the sample's local London penetration depth and allow for a quantitative reconstruction of the supercurrents flowing in the sample as a… ▽ More We report on direct, real-space imaging of the stray magnetic field above a micro-scale disc of a thin film of the high-temperature superconductor YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) using scanning single spin magnetometry. Our experiments yield a direct measurement of the sample's local London penetration depth and allow for a quantitative reconstruction of the supercurrents flowing in the sample as a result of Meissner screening. These results show the potential of scanning single spin magnetometry for studies of the nanoscale magnetic properties of thin-film superconductors, which could be readily extended to elevated temperatures or magnetic fields. △ Less

Submitted 19 July, 2018; originally announced July 2018.

Comments: 6 pages, 4 figures

Journal ref: Sensors 18, 3790 (2018)

A High-Resolution Combined Scanning Laser- and Widefield Polarizing Microscope for Imaging at Temperatures from 4 K to 300 K

Authors: Matthias Lange, Stefan Guénon, Felix Lever, Reinhold Kleiner, Dieter Koelle

Abstract: Polarized light microscopy, as a contrast-enhancing technique for optically anisotropic materials, is a method well suited for the investigation of a wide variety of effects in solid-state physics, as for example birefringence in crystals or the magneto-optical Kerr effect (MOKE). We present a microscopy setup that combines a widefield microscope and a confocal scanning laser microscope with polar… ▽ More Polarized light microscopy, as a contrast-enhancing technique for optically anisotropic materials, is a method well suited for the investigation of a wide variety of effects in solid-state physics, as for example birefringence in crystals or the magneto-optical Kerr effect (MOKE). We present a microscopy setup that combines a widefield microscope and a confocal scanning laser microscope with polarization-sensitive detectors. By using a high numerical aperture objective, a spatial resolution of about 240 nm at a wavelength of 405 nm is achieved. The sample is mounted on a $^4$He continuous flow cryostat providing a temperature range between 4 K and 300 K, and electromagnets are used to apply magnetic fields of up to 800 mT with variable in-plane orientation and 20 mT with out-of-plane orientation. Typical applications of the polarizing microscope are the imaging of the in-plane and out-of-plane magnetization via the longitudinal and polar MOKE, imaging of magnetic flux structures in superconductors covered with a magneto-optical indicator film via Faraday effect or imaging of structural features, such as twin-walls in tetragonal SrTiO$_3$. The scanning laser microscope furthermore offers the possibility to gain local information on electric transport properties of a sample by detecting the beam-induced voltage change across a current-biased sample. This combination of magnetic, structural and electric imaging capabilities makes the microscope a viable tool for research in the fields of oxide electronics, spintronics, magnetism and superconductivity. △ Less

Submitted 15 November, 2017; originally announced November 2017.

Comments: 14 pages, 11 figures. The following article has been accepted by Review of Scientific Instruments. After it is published, it will be found at http://aip.scitation.org/journal/rsi

Journal ref: Review of Scientific Instruments 88, 123705 (2017)

Coupling ultracold atoms to a superconducting coplanar waveguide resonator

Authors: H. Hattermann, D. Bothner, L. Y. Ley, B. Ferdinand, D. Wiedmaier, L. Sárkány, R. Kleiner, D. Koelle, J. Fortágh

Abstract: We demonstrate coupling of magnetically trapped ultracold $^87$Rb ground state atoms to a coherently driven superconducting coplanar resonator on an integrated atom chip. We measure the microwave field strength in the cavity through observation of the AC shift of the hyperfine transition frequency when the cavity is driven off-resonance from the atomic transition. The measured shifts are used to r… ▽ More We demonstrate coupling of magnetically trapped ultracold $^87$Rb ground state atoms to a coherently driven superconducting coplanar resonator on an integrated atom chip. We measure the microwave field strength in the cavity through observation of the AC shift of the hyperfine transition frequency when the cavity is driven off-resonance from the atomic transition. The measured shifts are used to reconstruct the field in the resonator, in close agreement with transmission measurements of the cavity, giving proof of the coupling between atoms and resonator. When driving the cavity in resonance with the atoms, we observe Rabi oscillations between atomic hyperfine states, demonstrating coherent control of the atomic states through the cavity field. The observation of two-photon Rabi oscillations using an additional external radio frequency enables the preparation of magnetically trapped coherent superposition states near the superconducting cavity, which are required for the implementation of an atomic quantum memory. △ Less

Submitted 10 July, 2017; originally announced July 2017.

Comments: 7 pages, 4 figures + Supplementary Materials (9 pages, 9 figures)

Journal ref: Nature Communicationsvolume 8: 2254 (2017)

Improving superconducting resonators in magnetic fields by reduced field-focussing and engineered flux screening

Authors: Daniel Bothner, Dominik Wiedmaier, Benedikt Ferdinand, Reinhold Kleiner, Dieter Koelle

Abstract: We experimentally investigate superconducting coplanar waveguide resonators in external magnetic fields and present two strategies to reduce field-induced dissipation channels and resonance frequency shifts. One of our approaches is to significantly reduce the superconducting ground-plane areas, which leads to reduced magnetic field-focussing and thus to lower effective magnetic fields inside the… ▽ More We experimentally investigate superconducting coplanar waveguide resonators in external magnetic fields and present two strategies to reduce field-induced dissipation channels and resonance frequency shifts. One of our approaches is to significantly reduce the superconducting ground-plane areas, which leads to reduced magnetic field-focussing and thus to lower effective magnetic fields inside the waveguide cavity. By this measure, the field-induced losses can be reduced by more than one order of magnitude in mT out-of-plane magnetic fields. When these resonators are additionally coupled inductively instead of capacitively to the microwave feedlines, an intrinsic closed superconducting loop is effectively shielding the heart of the resonator from magnetic fields by means of flux conservation. In total, we achieve a reduction of the field-induced resonance frequency shift by up to two orders of magnitude. We combine systematic parameter variations on the experimental side with numerical magnetic field calculations to explain the effects of our approaches and to support our conclusions. The presented results are relevant for all areas, where high-performance superconducting resonators need to be operated in magnetic fields, e.g. for quantum hybrid devices with superconducting circuits or electron spin resonance detectors based on coplanar waveguide cavities. △ Less

Submitted 6 July, 2017; originally announced July 2017.

Journal ref: Phys. Rev. Applied 8, 034025 (2017)

Current-phase relation of ballistic graphene Josephson junctions

Authors: Gaurav Nanda, Juan Luis Aguilera-Servin, Péter Rakyta, Andor Kormányos, Reinhold Kleiner, Dieter Koelle, Kenji Watanabe, Takashi Taniguchi, Lieven M. K. Vandersypen, Srijit Goswami

Abstract: The current-phase relation (CPR) of a Josephson junction (JJ) determines how the supercurrent evolves with the superconducting phase difference across the junction. Knowledge of the CPR is essential in order to understand the response of a JJ to various external parameters. Despite the rising interest in ultra-clean encapsulated graphene JJs, the CPR of such junctions remains unknown. Here, we use… ▽ More The current-phase relation (CPR) of a Josephson junction (JJ) determines how the supercurrent evolves with the superconducting phase difference across the junction. Knowledge of the CPR is essential in order to understand the response of a JJ to various external parameters. Despite the rising interest in ultra-clean encapsulated graphene JJs, the CPR of such junctions remains unknown. Here, we use a fully gate-tunable graphene superconducting quantum intereference device (SQUID) to determine the CPR of ballistic graphene JJs. Each of the two JJs in the SQUID is made with graphene encapsulated in hexagonal boron nitride. By independently controlling the critical current of the JJs, we can operate the SQUID either in a symmetric or asymmetric configuration. The highly asymmetric SQUID allows us to phase-bias one of the JJs and thereby directly obtain its CPR. The CPR is found to be skewed, deviating significantly from a sinusoidal form. The skewness can be tuned with the gate voltage and oscillates in anti-phase with Fabry-Pérot resistance oscillations of the ballistic graphene cavity. We compare our experiments with tight-binding calculations which include realistic graphene-superconductor interfaces and find a good qualitative agreement. △ Less

Submitted 23 December, 2016; v1 submitted 20 December, 2016; originally announced December 2016.

Comments: Supplementary information added; some references modified

NanoSQUID magnetometry of individual cobalt nanoparticles grown by focused electron beam induced deposition

Authors: M. J. Martínez-Pérez, B. Müller, D. Schwebius, D. Korinski, R. Kleiner, J. Sesé, D. Koelle

Abstract: We demonstrate the operation of low-noise nano superconducting quantum interference devices (SQUIDs) based on the high critical field and high critical temperature superconductor YBa$_2$Cu$_3$O$_7$ (YBCO) as ultra-sensitive magnetometers for single magnetic nanoparticles (MNPs). The nanoSQUIDs exploit the Josephson behavior of YBCO grain boundaries and have been patterned by focused ion beam milli… ▽ More We demonstrate the operation of low-noise nano superconducting quantum interference devices (SQUIDs) based on the high critical field and high critical temperature superconductor YBa$_2$Cu$_3$O$_7$ (YBCO) as ultra-sensitive magnetometers for single magnetic nanoparticles (MNPs). The nanoSQUIDs exploit the Josephson behavior of YBCO grain boundaries and have been patterned by focused ion beam milling. This allows to precisely define the lateral dimensions of the SQUIDs so as to achieve large magnetic coupling between the nanoloop and individual MNPs. By means of focused electron beam induced deposition, cobalt MNPs with typical size of several tens of nm have been grown directly on the surface of the sensors with nanometric spatial resolution. Remarkably, the nanoSQUIDs are operative over extremely broad ranges of applied magnetic field (-1 T $< μ_0 H <$ 1 T) and temperature (0.3 K $< T<$ 80 K). All these features together have allowed us to perform magnetization measurements under different ambient conditions and to detect the magnetization reversal of individual Co MNPs with magnetic moments (1 - 30) $\times 10^6\,μ_{\rm B}$. Depending on the dimensions and shape of the particles we have distinguished between two different magnetic states yielding different reversal mechanisms. The magnetization reversal is thermally activated over an energy barrier, which has been quantified for the (quasi) single-domain particles. Our measurements serve to show not only the high sensitivity achievable with YBCO nanoSQUIDs, but also demonstrate that these sensors are exceptional magnetometers for the investigation of the properties of individual nanomagnets. △ Less

Submitted 28 October, 2016; originally announced October 2016.

Metallic coplanar resonators optimized for low-temperature measurements

Authors: Mojtaba Javaheri Rahim, Thomas Lehleiter, Daniel Bothner, Cornelius Krellner, Dieter Koelle, Reinhold Kleiner, Martin Dressel, Marc Scheffler

Abstract: Metallic coplanar microwave resonators are widely employed at room temperature, but their low-temperature performance has received little attention so far. We characterize compact copper coplanar resonators with multiple modes from 2.5 to 20 GHz at temperatures as low as 5 K. We investigate the influence of center conductor width (20 to 100 μm) and coupling gap size (10 to 50 μm), and we observe a… ▽ More Metallic coplanar microwave resonators are widely employed at room temperature, but their low-temperature performance has received little attention so far. We characterize compact copper coplanar resonators with multiple modes from 2.5 to 20 GHz at temperatures as low as 5 K. We investigate the influence of center conductor width (20 to 100 μm) and coupling gap size (10 to 50 μm), and we observe a strong increase of quality factor (Q) for wider center conductors, reaching values up to 470. The magnetic-field dependence of the resonators is weak, with a maximum change in Q of 3.5% for an applied field of 7 T. This makes these metallic resonators well suitable for magnetic resonance studies, as we document with electron spin resonance (ESR) measurements at multiple resonance frequencies. △ Less

Submitted 22 August, 2016; originally announced August 2016.

Comments: 6 pages, 5 figures

Tunable $\varphi$ Josephson Junction ratchet

Authors: R. Menditto, H. Sickinger, M. Weides, H. Kohlstedt, D. Koelle, R. Kleiner, E. Goldobin

Abstract: We demonstrate experimentally the operation of a deterministic Josephson ratchet with tunable asymmetry. The ratchet is based on a $\varphi$ Josephson junction with a ferromagnetic barrier operating in the underdamped regime. The system is probed also under the action of an additional dc current, which acts as a counter force trying to stop the ratchet. Under these conditions the ratchet works aga… ▽ More We demonstrate experimentally the operation of a deterministic Josephson ratchet with tunable asymmetry. The ratchet is based on a $\varphi$ Josephson junction with a ferromagnetic barrier operating in the underdamped regime. The system is probed also under the action of an additional dc current, which acts as a counter force trying to stop the ratchet. Under these conditions the ratchet works against the counter force, thus producing a non-zero output power. Finally, we estimate the efficiency of the $\varphi$ Josephson junction ratchet. △ Less

Submitted 26 July, 2016; originally announced July 2016.

Journal ref: Phys. Rev. E 94, 042202 (2016)

Model $I$--$V$ curves and figures of merit of underdamped deterministic Josephson ratchets

Authors: E. Goldobin, R. Menditto, D. Koelle, R. Kleiner

Abstract: We propose simple models for the current-voltage characteristics of typical Josephson ratchets. We consider the case of a ratchet working against a constant applied counter force and derive analytical expressions for the key characteristics of such a ratchet: rectification curve, stop** force, input and output powers and rectification efficiency. Optimization of the ratchet performance is discus… ▽ More We propose simple models for the current-voltage characteristics of typical Josephson ratchets. We consider the case of a ratchet working against a constant applied counter force and derive analytical expressions for the key characteristics of such a ratchet: rectification curve, stop** force, input and output powers and rectification efficiency. Optimization of the ratchet performance is discussed. △ Less

Submitted 23 June, 2016; originally announced June 2016.

Journal ref: Phys. Rev. E 94, 032203 (2016)

Three-Axis Vector Nano Superconducting Quantum Interference Device

Authors: M. J. Martínez-Pérez, D. Gella, B. Müller, V. Morosh, R. Wöbling, J. Sesé, O. Kieler, R. Kleiner, D. Koelle

Abstract: We present the design, realization and performance of a three-axis vector nano Superconducting QUantum Interference Device (nanoSQUID). It consists of three mutually orthogonal SQUID nanoloops that allow distinguishing the three components of the vector magnetic moment of individual nanoparticles placed at a specific position. The device is based on Nb/HfTi/Nb Josephson junctions and exhibits line… ▽ More We present the design, realization and performance of a three-axis vector nano Superconducting QUantum Interference Device (nanoSQUID). It consists of three mutually orthogonal SQUID nanoloops that allow distinguishing the three components of the vector magnetic moment of individual nanoparticles placed at a specific position. The device is based on Nb/HfTi/Nb Josephson junctions and exhibits linewidths of $\sim 250$ nm and inner loop areas of $600 \times 90$ nm$^2$ and $500 \times 500$ nm$^2$. Operation at temperature $T=4.2$ K, under external magnetic fields up to $\sim 50$ mT is demonstrated. The experimental flux noise below $\sim 250$ ${\rm n}Φ_0/\sqrt{\rm Hz}$ in the white noise limit and the reduced dimensions lead to a total calculated spin sensitivity of $\sim 630$ $μ_{\rm B}/\sqrt{\rm Hz}$ and $\sim 70$ $μ_{\rm B}/\sqrt{\rm Hz}$ for the in-plane and out-of-plane components of the vector magnetic moment, respectively. The potential of the device for studying tridimensional properties of individual nanomagnets is discussed. △ Less

Submitted 23 June, 2016; v1 submitted 25 April, 2016; originally announced April 2016.

3D simulations of the electrothermal and THz emission properties of Bi$_2$Sr$_2$CaCu$_2$O$_8$ intrinsic Josephson junction stacks

Authors: Fabian Rudau, Raphael Wieland, Julian Langer, Xian**g Zhou, Min Ji, Nickolay Kinev, Luyao Hao, Ya Huang, Jun Li, Peiheng Wu, Takeshi Hatano, Valery Koshelets, Huabing Wang, Dieter Koelle, Reinhold Kleiner

Abstract: We used 2D coupled sine-Gordon equations combined with 3D heat diffusion equations to numerically investigate the thermal and electromagnetic properties of a $250 \times 70\,μ\mathrm{m}^2$ intrinsic Josephson junction stack. The 700 junctions are grouped to 20 segments; we assume that in a segment all junctions behave identically. At large input power a hot spot forms in the stack. Resonant electr… ▽ More We used 2D coupled sine-Gordon equations combined with 3D heat diffusion equations to numerically investigate the thermal and electromagnetic properties of a $250 \times 70\,μ\mathrm{m}^2$ intrinsic Josephson junction stack. The 700 junctions are grouped to 20 segments; we assume that in a segment all junctions behave identically. At large input power a hot spot forms in the stack. Resonant electromagnetic modes, oscillating either along the length ((0, $n$) modes) or the width (($m$, 0) modes) of the stack or having a more complex structure, can be excited both with and without a hot spot. At fixed bath temperature and bias current several cavity modes can coexist in the absence of a magnetic field. The (1, 0) mode, considered to be the most favorable mode for THz emission, can be stabilized by applying a small magnetic field along the length of the stack. A strong field-induced enhancement of the emission power is also found in experiment, for an applied field around 5.9 mT. △ Less

Submitted 1 April, 2016; v1 submitted 29 February, 2016; originally announced February 2016.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. Applied 5, 044017 (2016)

Quantum interference in an interfacial superconductor

Authors: Srijit Goswami, Emre Mulazimoglu, Ana M. R. V. L. Monteiro, Roman Wölbing, Dieter Koelle, Reinhold Kleiner, Ya. M. Blanter, Lieven M. K. Vandersypen, Andrea D. Caviglia

Abstract: The two-dimensional superconductor formed at the interface between the complex oxides, lanthanum aluminate (LAO) and strontium titanate (STO) has several intriguing properties that set it apart from conventional superconductors. Most notably, an electric field can be used to tune its critical temperature (T$_c$), revealing a dome-shaped phase diagram reminiscent of high T$_c$ superconductors. So f… ▽ More The two-dimensional superconductor formed at the interface between the complex oxides, lanthanum aluminate (LAO) and strontium titanate (STO) has several intriguing properties that set it apart from conventional superconductors. Most notably, an electric field can be used to tune its critical temperature (T$_c$), revealing a dome-shaped phase diagram reminiscent of high T$_c$ superconductors. So far, experiments with oxide interfaces have measured quantities which probe only the magnitude of the superconducting order parameter and are not sensitive to its phase. Here, we perform phase-sensitive measurements by realizing the first superconducting quantum interference devices (SQUIDs) at the LAO/STO interface. Furthermore, we develop a new paradigm for the creation of superconducting circuit elements, where local gates enable in-situ creation and control of Josephson junctions. These gate-defined SQUIDs are unique in that the entire device is made from a single superconductor with purely electrostatic interfaces between the superconducting reservoir and the weak link. We complement our experiments with numerical simulations and show that the low superfluid density of this interfacial superconductor results in a large, gate-controllable kinetic inductance of the SQUID. Our observation of robust quantum interference opens up a new pathway to understand the nature of superconductivity at oxide interfaces. △ Less

Submitted 13 July, 2016; v1 submitted 14 December, 2015; originally announced December 2015.

Comments: Version prior to peer review. Final version published in Nature Nanotechnology

Journal ref: Nature Nanotechnology 11, 861 (2016)

Magnetization reversal of an individual exchange biased permalloy nanotube

Authors: A. Buchter, R. Wölbing, M. Wyss, O. F. Kieler, T. Weimann, J. Kohlmann, A. B. Zorin, D. Rüffer, F. Matteini, G. Tütüncüoglu, F. Heimbach, A. Kleibert, A. Fontcuberta i Morral, D. Grundler, R. Kleiner, D. Koelle, M. Poggio

Abstract: We investigate the magnetization reversal mechanism in an individual permalloy (Py) nanotube (NT) using a hybrid magnetometer consisting of a nanometer-scale SQUID (nanoSQUID) and a cantilever torque sensor. The Py NT is affixed to the tip of a Si cantilever and positioned in order to optimally couple its stray flux into a Nb nanoSQUID. We are thus able to measure both the NT's volume magnetizatio… ▽ More We investigate the magnetization reversal mechanism in an individual permalloy (Py) nanotube (NT) using a hybrid magnetometer consisting of a nanometer-scale SQUID (nanoSQUID) and a cantilever torque sensor. The Py NT is affixed to the tip of a Si cantilever and positioned in order to optimally couple its stray flux into a Nb nanoSQUID. We are thus able to measure both the NT's volume magnetization by dynamic cantilever magnetometry and its stray flux using the nanoSQUID. We observe a training effect and temperature dependence in the magnetic hysteresis, suggesting an exchange bias. We find a low blocking temperature $T_B = 18 \pm 2$ K, indicating the presence of a thin antiferromagnetic native oxide, as confirmed by X-ray absorption spectroscopy on similar samples. Furthermore, we measure changes in the shape of the magnetic hysteresis as a function of temperature and increased training. These observations show that the presence of a thin exchange-coupled native oxide modifies the magnetization reversal process at low temperatures. Complementary information obtained via cantilever and nanoSQUID magnetometry allows us to conclude that, in the absence of exchange coupling, this reversal process is nucleated at the NT's ends and propagates along its length as predicted by theory. △ Less

Submitted 1 December, 2015; originally announced December 2015.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. B 92, 214432 (2015)

Quantitative nanoscale vortex-imaging using a cryogenic quantum magnetometer

Authors: Lucas Thiel, Dominik Rohner, Marc Ganzhorn, Patrick Appel, Elke Neu, Benedikt Müller, Reinhold Kleiner, Dieter Koelle, Patrick Maletinsky

Abstract: Microscopic studies of superconductors and their vortices play a pivotal role in our understanding of the mechanisms underlying superconductivity. Local measurements of penetration depths or magnetic stray-fields enable access to fundamental aspects of superconductors such as nanoscale variations of superfluid densities or the symmetry of their order parameter. However, experimental tools, which o… ▽ More Microscopic studies of superconductors and their vortices play a pivotal role in our understanding of the mechanisms underlying superconductivity. Local measurements of penetration depths or magnetic stray-fields enable access to fundamental aspects of superconductors such as nanoscale variations of superfluid densities or the symmetry of their order parameter. However, experimental tools, which offer quantitative, nanoscale magnetometry and operate over the large range of temperature and magnetic fields relevant to address many outstanding questions in superconductivity, are still missing. Here, we demonstrate quantitative, nanoscale magnetic imaging of Pearl vortices in the cuprate superconductor YBCO, using a scanning quantum sensor in form of a single Nitrogen-Vacancy (NV) electronic spin in diamond. The sensor-to-sample distance of ~10nm we achieve allows us to observe striking deviations from the prevalent monopole approximation in our vortex stray-field images, while we find excellent quantitative agreement with Pearl's analytic model. Our experiments yield a non-invasive and unambiguous determination of the system's local London penetration depth, and are readily extended to higher temperatures and magnetic fields. These results demonstrate the potential of quantitative quantum sensors in benchmarking microscopic models of complex electronic systems and open the door for further exploration of strongly correlated electron physics using scanning NV magnetometry. △ Less

Submitted 9 November, 2015; originally announced November 2015.

Comments: Main text (5 pages, 4 figures) plus supplementary material (5 pages, 6 figures). Comments welcome. Further information under http://www.quantum-sensing.ch

Effective model for a short Josephson junction with a phase discontinuity

Authors: E. Goldobin, S. Mironov, A. Buzdin, R. G. Mints, D. Koelle, R. Kleiner

Abstract: We consider a short Josephson junction with a phase discontinuity $κ$ created, e.g., by a pair of tiny current injectors, at some point $x_0$ along the length of the junction. We derive the effective current-phase relation (CPR) for the system as a whole, i.e., reduce it to an effective point-like junction. From the effective CPR we obtain the ground state of the system and predict the dependence… ▽ More We consider a short Josephson junction with a phase discontinuity $κ$ created, e.g., by a pair of tiny current injectors, at some point $x_0$ along the length of the junction. We derive the effective current-phase relation (CPR) for the system as a whole, i.e., reduce it to an effective point-like junction. From the effective CPR we obtain the ground state of the system and predict the dependence of its critical current on $κ$. We show that in a large range of $κ$ values the effective junction behaves as a $\varphi_0$ Josephson junction, i.e., has a unique ground state phase $\varphi_0$ within each $2π$ interval. For $κ\approxπ$ and $x_0$ near the middle of the junction one obtains a $\varphi_0\pm\varphi$ junction, i.e., the Josephson junction with degenerate ground state phase $\varphi_0\pm\varphi$ within each $2π$ interval. Further, in view of possible escape experiments especially in the quantum domain, we investigate the scaling of the energy barrier and eigenfrequency close to the critical currents and predict the behavior of the escape histogram width $σ(κ)$ in the regime of the macroscopic quantum tunneling. △ Less

Submitted 18 August, 2015; originally announced August 2015.

Observing electron spin resonance between 0.1 and 67 GHz at temperatures between 50 mK and 300 K using broadband metallic coplanar waveguides

Authors: Yvonne Wiemann, Julian Simmendinger, Conrad Clauss, Lapo Bogani, Daniel Bothner, Dieter Koelle, Reinhold Kleiner, Martin Dressel, Marc Scheffler

Abstract: We describe a fully broadband approach for electron spin resonance (ESR) experiments where it is possible to not only tune the magnetic field but also the frequency continuously over wide ranges. Here a metallic coplanar transmission line acts as compact and versatile microwave probe that can easily be implemented in different cryogenic setups. We perform ESR measurements at frequencies between 0.… ▽ More We describe a fully broadband approach for electron spin resonance (ESR) experiments where it is possible to not only tune the magnetic field but also the frequency continuously over wide ranges. Here a metallic coplanar transmission line acts as compact and versatile microwave probe that can easily be implemented in different cryogenic setups. We perform ESR measurements at frequencies between 0.1 and 67 GHz and at temperatures between 50 mK and room temperature. Three different types of samples (Cr3+ ions in ruby, organic radicals of the nitronyl-nitroxide family, and the doped semiconductor Si:P) represent different possible fields of application for the technique. We demonstrate that an extremely large phase space in temperature, magnetic field, and frequency for ESR measurements, substantially exceeding the range of conventional ESR setups, is accessible with metallic coplanar lines. △ Less

Submitted 22 May, 2015; originally announced May 2015.

Comments: 6 pages, 5 figures

Journal ref: Appl. Phys. Lett. 106, 193505 (2015)

Tunable $\pm\varphi$, $\varphi_0$ and $\varphi_0\pm\varphi$ Josephson junction

Authors: E. Goldobin, D. Koelle, R. Kleiner

Abstract: We study a 0-$π$ dc superconducting quantum interference device (SQUID) with asymmetric inductances and critical currents of the two Josephson junctions (JJs). By considering such a dc SQUID as a black box with two terminals, we calculate its effective current-phase relation $I_s(ψ)$ and the Josephson energy $U(ψ)$, where $ψ$ is the Josephson phase across the terminals. We show that there is a dom… ▽ More We study a 0-$π$ dc superconducting quantum interference device (SQUID) with asymmetric inductances and critical currents of the two Josephson junctions (JJs). By considering such a dc SQUID as a black box with two terminals, we calculate its effective current-phase relation $I_s(ψ)$ and the Josephson energy $U(ψ)$, where $ψ$ is the Josephson phase across the terminals. We show that there is a domain of parameters where the black box has the properties of a $\varphi$ JJ with degenerate ground state phases $ψ=\pm\varphi$. The $\varphi$ domain is rather large, so one can easily construct a $\varphi$ JJ experimentally. We derive the current phase relation and show that it can be tuned \emph{in situ} by applying an external magnetic flux resulting in a continuous transition between the systems with static solutions $ψ=\pm\varphi$, $ψ=\varphi_0$ ($\varphi_0 \neq 0,π$) and even $ψ=\varphi_0\pm\varphi$. The dependence of $\varphi_0$ on applied magnetic flux is not $2π$ (one flux quantum) periodic. △ Less

Submitted 2 June, 2015; v1 submitted 22 April, 2015; originally announced April 2015.

Comments: to be published in Phys. Rev. B (status on June 1st, 2015)

Journal ref: Phys. Rev. B 91, 214511 (2015)

Low-Noise YBa$_2$Cu$_3$O$_7$ NanoSQUIDs for Performing Magnetization-Reversal Measurements on Magnetic Nanoparticles

Authors: Tobias Schwarz, Roman Wölbing, Christopher F. Reiche, Benedikt Müller, Maria-José Martínez-Pérez, Thomas Mühl, Bernd Büchner, Reinhold Kleiner, Dieter Koelle

Abstract: We fabricated YBa$_2$Cu$_3$O$_7$ (YBCO) direct current (dc) nano superconducting quantum interference devices (nanoSQUIDs) based on grain boundary Josephson junctions by focused ion beam patterning. Characterization of electric transport and noise properties at 4.2$\,$K in magnetically shielded environment yields a very small inductance $L$ of a few pH for an optimized device geometry. This in tur… ▽ More We fabricated YBa$_2$Cu$_3$O$_7$ (YBCO) direct current (dc) nano superconducting quantum interference devices (nanoSQUIDs) based on grain boundary Josephson junctions by focused ion beam patterning. Characterization of electric transport and noise properties at 4.2$\,$K in magnetically shielded environment yields a very small inductance $L$ of a few pH for an optimized device geometry. This in turn results in very low values of flux noise $<50\,{\rm n}Φ_0/{\rm Hz}^{1/2}$ in the thermal white noise limit, which yields spin sensitivities of a few $μ_{\rm B}/{\rm Hz}^{1/2}$ ($Φ_0$ is the magnetic flux quantum and $μ_{\rm B}$ is the Bohr magneton). We observe frequency-dependent excess noise up to 7$\,$MHz, which can only partially be eliminated by bias reversal readout. This indicates the presence of fluctuators of unknown origin, possibly related to defect-induced spins in the SrTiO$_3$ substrate. We demonstrate the potential of using YBCO nanoSQUIDs for the investigation of small spin systems, by placing a 39$\,$nm diameter Fe nanowire, encapsulated in a carbon nanotube, on top of a non-optimized YBCO nanoSQUID and by measuring the magnetization reversal of the Fe nanowire via the change of magnetic flux coupled to the nanoSQUID. The measured flux signals upon magnetization reversal of the Fe nanowire are in very good agreement with estimated values, and the determined switching fields indicate magnetization reversal of the nanowire via curling mode. △ Less

Submitted 20 March, 2015; originally announced March 2015.

Comments: 10 pages, 5 figure and supplemental material (4 pages)

Sensitivity of ultracold atoms to quantized flux in a superconducting ring

Authors: P. Weiss, M. Knufinke, S. Bernon, D. Bothner, L. Sárkány, C. Zimmermann, R. Kleiner, D. Koelle, J. Fortágh, H. Hattermann

Abstract: We report on the magnetic trap** of an ultracold ensemble of $^{87}$Rb atoms close to a superconducting ring prepared in different states of quantized magnetic flux. The niobium ring of 10 $μ$m radius is prepared in a flux state $n Φ_0$, with $Φ_0 = h / 2e$ the flux quantum and $n$ varies between $\pm 5$. An atomic cloud of 250 nK temperature is positioned with a harmonic magnetic trap** poten… ▽ More We report on the magnetic trap** of an ultracold ensemble of $^{87}$Rb atoms close to a superconducting ring prepared in different states of quantized magnetic flux. The niobium ring of 10 $μ$m radius is prepared in a flux state $n Φ_0$, with $Φ_0 = h / 2e$ the flux quantum and $n$ varies between $\pm 5$. An atomic cloud of 250 nK temperature is positioned with a harmonic magnetic trap** potential at $\sim 18 μ$m distance below the ring. The inhomogeneous magnetic field of the supercurrent in the ring contributes to the magnetic trap** potential of the cloud. The induced deformation of the magnetic trap impacts the shape of the cloud, the number of trapped atoms as well as the center-of-mass oscillation frequency of Bose-Einstein condensates. When the field applied during cooldown of the chip is varied, the change of these properties shows discrete steps that quantitatively match flux quantization. △ Less

Submitted 6 February, 2015; originally announced February 2015.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 114, 113003 (2015)

Thermal and electromagnetic properties of Bi$_2$Sr$_2$CaCu$_2$O$_8$ intrinsic Josephson junction stacks studied via one-dimensional coupled sine-Gordon equations

Authors: F. Rudau, M. Tsujimoto, B. Gross, T. E. Judd, R. Wieland, E. Goldobin, N. Kinev, J. Yuan, Y. Huang, M. Ji, X. J. Zhou, D. Y. An, A. Ishii, R. G. Mints, P. H. Wu, T. Hatano, H. B. Wang, V. P. Koshelets, D. Koelle, R. Kleiner

Abstract: We used one-dimensional coupled sine-Gordon equations combined with heat diffusion equations to numerically investigate the thermal and electromagnetic properties of a $300\,μ\mathrm{m}$ long intrinsic Josephson junction stack consisting of $N = 700$ junctions. The junctions in the stack are combined to $M$ segments where we assume that inside a segment all junctions behave identically. Most simul… ▽ More We used one-dimensional coupled sine-Gordon equations combined with heat diffusion equations to numerically investigate the thermal and electromagnetic properties of a $300\,μ\mathrm{m}$ long intrinsic Josephson junction stack consisting of $N = 700$ junctions. The junctions in the stack are combined to $M$ segments where we assume that inside a segment all junctions behave identically. Most simulations are for $M = 20$. For not too high bath temperatures there is the appearence of a hot spot at high bias currents. In terms of electromagnetic properties, robust standing wave patterns appear in the current density and electric field distributions. These patterns come together with vortex/antivortex lines across the stack that correspond to $π$ kink states, discussed before in the literature for a homogeneous temperature distribution in the stack. We also discuss scaling of the thermal and electromagnetic properties with $M$, on the basis of simulations with $M$ between 10 and 350. △ Less

Submitted 5 March, 2015; v1 submitted 1 December, 2014; originally announced December 2014.

Comments: 17 pages, 17 figures

Journal ref: Phys. Rev. B 91, 104513 (2015)

Conductivity and magnetoresistance of La$_{0.7}$Ce$_{0.3}$MnO$_3$ thin films under photoexcitation

Authors: Andreas Thiessen, Elke Beyreuther, Robert Werner, Reinhold Kleiner, Dieter Koelle, Lukas M. Eng

Abstract: La$_{0.7}$Ce$_{0.3}$MnO$_3$ thin films of different thicknesses, degrees of CeO$_2$-phase segregation and oxygen deficiency, grown on SrTiO$_3$ single crystal substrates, were comparatively investigated with respect to both their spectral and temperature-dependent photoconductivity (PC) and their magnetoresistance (MR) behaviour under photoexcitation. While as-grown films were insensitive to optic… ▽ More La$_{0.7}$Ce$_{0.3}$MnO$_3$ thin films of different thicknesses, degrees of CeO$_2$-phase segregation and oxygen deficiency, grown on SrTiO$_3$ single crystal substrates, were comparatively investigated with respect to both their spectral and temperature-dependent photoconductivity (PC) and their magnetoresistance (MR) behaviour under photoexcitation. While as-grown films were insensitive to optical excitation, oxygen reduction appeared to be an effective way to decrease the film resistance, but the film thickness was found to play a minor role. However, from the evaluation of the spectral behaviour of the PC and the comparison of the MR of the LCeMO/substrate-samples with a bare substrate under illumination we find that the photoconductivity data reflects not only contributions from (i) photogenerated charge carriers in the film and (ii) carriers injected from the photoconductive substrate (as concluded from earlier works), but also (iii) a decisive parallel photoconduction in the SrTiO$_3$ substrate. Furthermore -- also by analyzing the MR characteristics -- the unexpected occurence of a strong electroresistive effect in the sample with the highest degree of CeO$_2$ segregation and oxygen deficiency could be attributed to the electroresistance of the SrTiO$_3$ substrate as well. The results suggest a critical reconsideration and possibly a reinterpretation of several previous photoconductivity and electroresistance investigations of manganite thin films on SrTiO$_3$. △ Less

Submitted 21 August, 2014; originally announced August 2014.

Comments: 11 pages, 11 figures

Journal ref: Journal of Physics: Condensed Matter, 27, 025503 (2015)