Showing 1–50 of 66 results for author: Kirtley, J R

Pearl vortices in anisotropic superconducting films

Authors: V. G. Kogan, N. Nakagawa, J. R. Kirtley

Abstract: The magnetic field of vortices in anisotropic superconducting films is considered in the framework of anisotropic London approach. It is found that at distances large relative to the core size, the magnetic field normal to the film surface may change sign. We find that the magnetic field attenuates at large distances as $1/r^3$ as it does in isotropic films, but the anisotropy induces an angular… ▽ More The magnetic field of vortices in anisotropic superconducting films is considered in the framework of anisotropic London approach. It is found that at distances large relative to the core size, the magnetic field normal to the film surface may change sign. We find that the magnetic field attenuates at large distances as $1/r^3$ as it does in isotropic films, but the anisotropy induces an angular dependence to the supercurrents which causes the sign of the field to change for anisotropy parameters $γ=λ_2/λ_1>\sqrt{2}$ in some parts of the $(x,y)$ plane. △ Less

Submitted 4 September, 2021; originally announced September 2021.

Comments: 8 pages, 12 figures

Local observation of linear-$T$ superfluid density and anomalous vortex dynamics in URu$_2$Si$_2$

Authors: Yusuke Iguchi, Irene P. Zhang, Eric D. Bauer, Filip Ronning, John R. Kirtley, Kathryn A. Moler

Abstract: The heavy fermion superconductor URu$_2$Si$_2$ is a candidate for chiral, time-reversal symmetry-breaking superconductivity with a nodal gap structure. Here, we microscopically visualized superconductivity and spatially inhomogeneous ferromagnetism in URu$_2$Si$_2$. We observed linear-$T$ superfluid density, consistent with d-wave pairing symmetries including chiral d-wave, but did not observe the… ▽ More The heavy fermion superconductor URu$_2$Si$_2$ is a candidate for chiral, time-reversal symmetry-breaking superconductivity with a nodal gap structure. Here, we microscopically visualized superconductivity and spatially inhomogeneous ferromagnetism in URu$_2$Si$_2$. We observed linear-$T$ superfluid density, consistent with d-wave pairing symmetries including chiral d-wave, but did not observe the spontaneous magnetization expected for chiral d-wave. Local vortex pinning potentials had either four- or two-fold rotational symmetries with various orientations at different locations. Taken together, these data support a nodal gap structure in URu$_2$Si$_2$ and suggest that chirality either is not present or does not lead to detectable spontaneous magnetization. △ Less

Submitted 15 February, 2021; originally announced February 2021.

Journal ref: Phys. Rev. B 103, 220503 (2021)

Observation of robust edge superconductivity in Fe(Se,Te) under strong magnetic perturbation

Authors: Da Jiang, Yin** Pan, Shiyuan Wang, Yishi Lin, Connor M. Holland, John R. Kirtley, Xianhui Chen, Jun Zhao, Lei Chen, Shaoyu Yin, Yihua Wang

Abstract: The iron-chalcogenide high temperature superconductor Fe(Se,Te) (FST) has been reported to exhibit complex magnetic ordering and nontrivial band topology which may lead to novel superconducting phenomena. However, the recent studies have so far been largely concentrated on its band and spin structures while its mesoscopic electronic and magnetic response, crucial for future device applications, ha… ▽ More The iron-chalcogenide high temperature superconductor Fe(Se,Te) (FST) has been reported to exhibit complex magnetic ordering and nontrivial band topology which may lead to novel superconducting phenomena. However, the recent studies have so far been largely concentrated on its band and spin structures while its mesoscopic electronic and magnetic response, crucial for future device applications, has not been explored experimentally. Here, we used scanning superconducting quantum interference device microscopy for its sensitivity to both local diamagnetic susceptibility and current distribution in order to image the superfluid density and supercurrent in FST. We found that in FST with 10% interstitial Fe, whose magnetic structure was heavily disrupted, bulk superconductivity was significantly suppressed whereas edge still preserved strong superconducting diamagnetism. The edge dominantly carried supercurrent despite of a very long magnetic penetration depth. The temperature dependence of the superfluid density and supercurrent distribution were distinctively different between the edge and the bulk. Our Heisenberg modeling showed that magnetic dopants stabilize anti-ferromagnetic spin correlation along the edge, which may contribute towards its robust superconductivity. Our observations hold implication for FST as potential platforms for topological quantum computation and superconducting spintronics. △ Less

Submitted 19 January, 2021; originally announced January 2021.

Journal ref: Science Bulletin, 2021, 66(5):425-432

Influence of resonances on the noise performance of SQUID susceptometers

Authors: Samantha I Davis, John R. Kirtley, Kathryn A. Moler

Abstract: Scanning Superconducting Quantum Interference Device (SQUID) Susceptometry simultaneously images the local magnetic fields and susceptibilities above a sample with sub-micron spatial resolution. Further development of this technique requires a thorough understanding of the current, voltage, and flux characteristics of scanning SQUID susceptometers. These sensors often have striking anomalies in th… ▽ More Scanning Superconducting Quantum Interference Device (SQUID) Susceptometry simultaneously images the local magnetic fields and susceptibilities above a sample with sub-micron spatial resolution. Further development of this technique requires a thorough understanding of the current, voltage, and flux characteristics of scanning SQUID susceptometers. These sensors often have striking anomalies in their current-voltage characteristics, which we believe to be due to electromagnetic resonances. The effect of these resonances on the performance of these SQUIDs is unknown. To explore the origin and impact of the resonances, we have developed a model that qualitatively reproduces the experimentally-determined current-voltage characteristics of our scanning SQUID susceptometers. We use this model to calculate the noise characteristics of SQUIDs of different designs. We find that the calculated ultimate flux noise is better in susceptometers with dam** resistors that diminish the resonances than susceptometers without dam** resistors. Such calculations will enable the optimization of the signal-to-noise characteristics of scanning SQUID susceptometers. △ Less

Submitted 29 December, 2019; v1 submitted 9 November, 2019; originally announced November 2019.

Comments: 10 pages, 8 figures

Imaging anisotropic vortex dynamics in FeSe

Authors: Irene P. Zhang, Johanna C. Palmstrom, Hilary Noad, Logan Bishop-Van Horn, Yusuke Iguchi, Zheng Cui, John R. Kirtley, Ian R. Fisher, Kathryn A. Moler

Abstract: Strong vortex pinning in FeSe could be useful for technological applications and could provide clues about the coexistence of superconductivity and nematicity. To characterize the pinning of individual, isolated vortices, we simultaneously apply a local magnetic field and image the vortex motion with scanning SQUID susceptibility. We find that the pinning is highly anisotropic: the vortices move e… ▽ More Strong vortex pinning in FeSe could be useful for technological applications and could provide clues about the coexistence of superconductivity and nematicity. To characterize the pinning of individual, isolated vortices, we simultaneously apply a local magnetic field and image the vortex motion with scanning SQUID susceptibility. We find that the pinning is highly anisotropic: the vortices move easily along directions that are parallel to the orientations of twin domain walls and pin strongly in a perpendicular direction. These results are consistent with a scenario in which the anisotropy arises from vortex pinning on domain walls and quantify the dynamics of individual vortex pinning in FeSe. △ Less

Submitted 27 March, 2019; originally announced March 2019.

Comments: 7 pages, 7 figures

Journal ref: Phys. Rev. B 100, 024514 (2019)

Real-space imaging and flux noise spectroscopy of magnetic dynamics in Ho$_2$Ti$_2$O$_7$

Authors: Christopher A. Watson, Ilya Sochnikov, John R. Kirtley, Robert J. Cava, Kathryn A. Moler

Abstract: Holmium titanate (Ho$_2$Ti$_2$O$_7$) is a rare earth pyrochlore and a canonical example of a classical spin ice material. Despite the success of magnetic monopole models, a full understanding of the energetics and relaxation rates in this material has remained elusive, while recent studies have shown that defects play a central role in the magnetic dynamics. We used a scanning superconducting quan… ▽ More Holmium titanate (Ho$_2$Ti$_2$O$_7$) is a rare earth pyrochlore and a canonical example of a classical spin ice material. Despite the success of magnetic monopole models, a full understanding of the energetics and relaxation rates in this material has remained elusive, while recent studies have shown that defects play a central role in the magnetic dynamics. We used a scanning superconducting quantum interference device (SQUID) microscope to study the spatial and temporal magnetic fluctuations in three regions with different defect densities from a Ho$_2$Ti$_2$O$_7$ single crystal as a function of temperature. We found that the magnetic flux noise power spectra are not determined by simple thermally-activated behavior and observed evidence of magnetic screening that is qualitatively consistent with Debye-like screening due to a dilute gas of low-mobility magnetic monopoles. This work establishes magnetic flux spectroscopy as a powerful tool for studying materials with complex magnetic dynamics, including frustrated correlated spin systems. △ Less

Submitted 27 March, 2019; originally announced March 2019.

Comments: 7 pages, 6 figures

Observation of high-Tc superconductivity in inhomogeneous combinatorial ceramics

Authors: Mitra Iranmanesh, Nikolai D. Zhigadlo, Thanaporn Tohsophon, John R. Kirtley, Wilfried Assenmacher, Werner Mader, Jürg Hulliger

Abstract: A single-sample synthesis concept based on multi-element ceramic samples can produce a variety of local products. When applied to cuprate superconductors (SC), statistical modelling predicts the occurrence of possible compounds in a concentration range of about 50 ppm. In samples with such low concentrations, determining which compositions are superconducting is a challenging task and requires loc… ▽ More A single-sample synthesis concept based on multi-element ceramic samples can produce a variety of local products. When applied to cuprate superconductors (SC), statistical modelling predicts the occurrence of possible compounds in a concentration range of about 50 ppm. In samples with such low concentrations, determining which compositions are superconducting is a challenging task and requires local probes or separation techniques. Here, we report results from samples with seven components: BaO2, CaCO3, SrCO3, La2O3, PbCO3, ZrO2 and CuO oxides and carbonates, starting from different grain sizes. The reacted ceramics show different phases, particular grain growth, as well as variations in homogeneity and superconducting properties. High-Tc superconductivity up to 118 K was found. Powder x-ray diffraction (XRD) in combination with energy-dispersive spectroscopy (EDS), scanning transmission electron microscopy (STEM) can assign Pb1223 and (Sr,Ca,Ba)0.7-1.0CuO2 phases in inhomogeneous samples milled with 10 mm ball sizes. Rather uniform samples featuring strong grain growth were obtained with 3 mm ball sizes, resulting in Tc =70 K superconductivity of the La(Ba,Ca)2Cu3Ox based phase. Scanning SQUID microscopy (SSM) establishes locally formed superconducting areas at a level of a few microns in inhomogeneous superconducting particles captured by a magnetic separation technique. The present results demonstrate a new synthetic approach for attaining high-Tc superconductivity in compounds without Bi, Tl, Hg, or the need for high-pressure synthesis. △ Less

Submitted 15 December, 2018; originally announced December 2018.

Journal ref: Solid State Sciences 88 (2019) 6-12

Cryogen-free variable temperature scanning SQUID microscope

Authors: Logan Bishop-Van Horn, Zheng Cui, John R. Kirtley, Kathryn A. Moler

Abstract: Scanning Superconducting QUantum Interference Device (SQUID) microscopy is a powerful tool for imaging local magnetic properties of materials and devices, but it requires a low-vibration cryogenic environment, traditionally achieved by thermal contact with a bath of liquid helium or the mixing chamber of a "wet" dilution refrigerator. We mount a SQUID microscope on the 3 K plate of a Bluefors cryo… ▽ More Scanning Superconducting QUantum Interference Device (SQUID) microscopy is a powerful tool for imaging local magnetic properties of materials and devices, but it requires a low-vibration cryogenic environment, traditionally achieved by thermal contact with a bath of liquid helium or the mixing chamber of a "wet" dilution refrigerator. We mount a SQUID microscope on the 3 K plate of a Bluefors cryocooler and characterize its vibration spectrum by measuring SQUID noise in a region of sharp flux gradient. By implementing passive vibration isolation, we reduce relative sensor-sample vibrations to 20 nm in-plane and 15 nm out-of-plane. A variable-temperature sample stage that is thermally isolated from the SQUID sensor enables measurement at sample temperatures from 2.8 K to 110 K. We demonstrate these advances by imaging inhomogeneous diamagnetic susceptibility and vortex pinning in optimally-doped YBCO above 90 K. △ Less

Submitted 24 February, 2019; v1 submitted 7 December, 2018; originally announced December 2018.

Comments: 7 pages, 8 figures

Journal ref: Rev. Sci. Instrum. 90, 063705 (2019)

Observation of the signatures of sub-resolution defects in two-dimensional superconductors with scanning SQUID

Authors: Hilary Noad, Christopher A. Watson, Hisashi Inoue, Minu Kim, Hiroki K. Sato, Christopher Bell, Harold Y. Hwang, John R. Kirtley, Kathryn A. Moler

Abstract: The diamagnetic susceptibility of a superconductor is directly related to its superfluid density. Mutual inductance is a highly sensitive method for characterizing thin films; however, in traditional mutual inductance measurements, the measured response is a non-trivial average over the area of the mutual inductance coils, which are typically of millimeter size. Here we image localized, isolated f… ▽ More The diamagnetic susceptibility of a superconductor is directly related to its superfluid density. Mutual inductance is a highly sensitive method for characterizing thin films; however, in traditional mutual inductance measurements, the measured response is a non-trivial average over the area of the mutual inductance coils, which are typically of millimeter size. Here we image localized, isolated features in the diamagnetic susceptibility of δ-doped SrTiO3, the 2-DES at the interface between LaAlO3 and SrTiO3, and Nb superconducting thin film systems using scanning superconducting quantum interference device susceptometry, with spatial resolution as fine as 0.7 μm. We show that these features can be modeled as locally suppressed superfluid density, with a single parameter that characterizes the strength of each feature. This method provides a systematic means of finding and quantifying submicron defects in two-dimensional superconductors. △ Less

Submitted 6 August, 2018; v1 submitted 2 June, 2018; originally announced June 2018.

Comments: 11 pages, 10 figures

Journal ref: Phys. Rev. B 98, 064510 (2018)

Spatially modulated susceptibility in thin film La$_{2-x}$Ba$_x$CuO$_4$

Authors: Samantha I. Davis, Rahim R. Ullah, Carolina Adamo, Christopher A. Watson, John R. Kirtley, Malcolm R. Beasley, Steven A. Kivelson, Kathryn A. Moler

Abstract: The high critical temperature superconductor Lanthanum Barium Copper Oxide (La2-xBaxCuO4 or LBCO) exhibits a strong anomaly in critical temperature at 1/8th do**, nematicity, and other interesting properties. We report here Scanning Superconducting Quantum Interference Device (SQUID) imaging of the magnetic fields and susceptibility in a number of thin film LBCO samples with do** in the vicini… ▽ More The high critical temperature superconductor Lanthanum Barium Copper Oxide (La2-xBaxCuO4 or LBCO) exhibits a strong anomaly in critical temperature at 1/8th do**, nematicity, and other interesting properties. We report here Scanning Superconducting Quantum Interference Device (SQUID) imaging of the magnetic fields and susceptibility in a number of thin film LBCO samples with do** in the vicinity of the 1/8th anomaly. Spatially resolved measurements of the critical temperatures of these samples do not show a pronounced depression at 1/8th do**. They do, however, exhibit strong, nearly linear modulations of the susceptibility ("straie") of multiple samples with surprisingly long periods of 1-4 microns. Counterintuitively, vortices trap in positions of largest diamagnetic susceptibility in these striae. Given the rich interplay of different orders in this material system and its known sensitivity to epitaxial strain, we propose phase separation as a possible origin of these features and discuss scenarios in which that might arise. △ Less

Submitted 6 April, 2018; originally announced April 2018.

Comments: 8 pages, 10 figures

Journal ref: Phys. Rev. B 98, 014506 (2018)

A micro-SQUID with dispersive readout for magnetic scanning microscopy

Authors: Farshad Foroughi, Jan-Michael Mol, Tristan Mueller, John R. Kirtley, Kathryn A. Moler, Hendrik Bluhm

Abstract: We have designed and characterized a micro-SQUID with dispersive readout for use in low temperature scanning probe microscopy systems. The design features a capacitively shunted RF SQUID with a tunable resonance frequency from 5 to 12 GHz, micrometer spatial resolution and integrated superconducting coils for local application of magnetic fields. The SQUID is operated as a nonlinear oscillator wit… ▽ More We have designed and characterized a micro-SQUID with dispersive readout for use in low temperature scanning probe microscopy systems. The design features a capacitively shunted RF SQUID with a tunable resonance frequency from 5 to 12 GHz, micrometer spatial resolution and integrated superconducting coils for local application of magnetic fields. The SQUID is operated as a nonlinear oscillator with a flux- and power-dependent resonance frequency. Measurements for device characterization and noise benchmarking were carried out at 4 K. The measured flux noise above 10 kHz at 4 K is $80\;\mathrm{n}Φ_0 \mathrm{Hz}^{-1/2}$ at a bandwidth of 200 MHz. Estimations suggest that one can benefit from parametric gain based on inherent nonlinearity of the Josephson junction and reduce the flux noise to $30\;\mathrm{n}Φ_0\mathrm{Hz}^{-1/2}$ at 100 mK, which corresponds to $7.5\;\mathrm{μ_B Hz^{-1/2}}$ for a magnetic moment located at the center of the pickup loop. △ Less

Submitted 20 March, 2018; originally announced March 2018.

Journal ref: Appl. Phys. Lett. 112, 252601 (2018)

Determining the vortex tilt relative to a superconductor surface

Authors: V. G. Kogan, J. R. Kirtley

Abstract: It is of interest to determine the exit angle of a vortex from a superconducting surface, since this affects the intervortex interactions and their consequences. Two ways to determine this angle are to image the vortex magnetic fields above the surface, or the vortex core shape at the surface. In this work we evaluate the field h(x, y, z) above a flat superconducting surface x, y and the currents… ▽ More It is of interest to determine the exit angle of a vortex from a superconducting surface, since this affects the intervortex interactions and their consequences. Two ways to determine this angle are to image the vortex magnetic fields above the surface, or the vortex core shape at the surface. In this work we evaluate the field h(x, y, z) above a flat superconducting surface x, y and the currents J(x,y) at that surface for a straight vortex tilted relative to the normal to the surface, for both the isotropic and anisotropic cases. In principle, these results can be used to determine the vortex exit tilt angle from analyses of magnetic field imaging or density of states data. △ Less

Submitted 29 June, 2017; originally announced June 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. B 96, 174516 (2017)

Spatially modulated magnetic structure of EuS due to the tetragonal domain structure of SrTiO$_3$

Authors: Aaron J. Rosenberg, Ferhat Katmis, John R. Kirtley, Nuh Gedik, Jagadeesh S. Moodera, Kathryn A. Moler

Abstract: The combination of ferromagnets with topological superconductors or insulators allows for new phases of matter that support excitations such as chiral edge modes and Majorana fermions. EuS, a wide-band-gap ferromagnetic insulator with a Curie temperature around 16 K, and SrTiO$_3$ (STO), an important substrate for engineering heterostructures, may support these phases. We present scanning supercon… ▽ More The combination of ferromagnets with topological superconductors or insulators allows for new phases of matter that support excitations such as chiral edge modes and Majorana fermions. EuS, a wide-band-gap ferromagnetic insulator with a Curie temperature around 16 K, and SrTiO$_3$ (STO), an important substrate for engineering heterostructures, may support these phases. We present scanning superconducting quantum interference device (SQUID) measurements of EuS grown epitaxially on STO that reveal micron-scale variations in ferromagnetism and paramagnetism. These variations are oriented along the STO crystal axes and only change their configuration upon thermal cycling above the STO cubic-to-tetragonal structural transition temperature at 105 K, indicating that the observed magnetic features are due to coupling between EuS and the STO tetragonal structure. We speculate that the STO tetragonal distortions may strain the EuS, altering the magnetic anisotropy on a micron-scale. This result demonstrates that local variation in the induced magnetic order from EuS grown on STO needs to be considered when engineering new phases of matter that require spatially homogeneous exchange. △ Less

Submitted 22 June, 2017; originally announced June 2017.

Journal ref: Phys. Rev. Materials 1, 074406 (2017)

Determining the vibrations between sensor and sample in SQUID microscopy

Authors: Daniel Schiessl, John R. Kirtley, Lisa Paulius, Aaron J. Rosenberg, Johanna C. Palmstrom, Rahim R. Ullah, Connor M. Holland, Y. -K. -K. Jung, Mark B. Ketchen, Gerald W. Gibson, Jr., Kathryn A. Moler

Abstract: Vibrations can cause noise in scanning probe microscopies. Relative vibrations between the scanning sensor and the sample are important but can be more difficult to determine than absolute vibrations or vibrations relative to the laboratory. We measure the noise spectral density in a scanning SQUID microscope as a function of position near a localized source of magnetic field, and show that we can… ▽ More Vibrations can cause noise in scanning probe microscopies. Relative vibrations between the scanning sensor and the sample are important but can be more difficult to determine than absolute vibrations or vibrations relative to the laboratory. We measure the noise spectral density in a scanning SQUID microscope as a function of position near a localized source of magnetic field, and show that we can determine the spectra of all three components of the relative sensor-sample vibrations. This method is a powerful tool for diagnosing vibrational noise in scanning microscopies. △ Less

Submitted 2 October, 2016; originally announced October 2016.

Comments: 4 pages, 3 figures

The response of small SQUID pickup loops to magnetic fields

Authors: John R. Kirtley, Lisa Paulius, Aaron J. Rosenberg, Johanna C. Palmstrom, Daniel Schiessl, Colin L. Jermain, Jonathan Gibbons, Connor M. Holland, Y. -K. -K. Fung, Martin E. Huber, Mark B. Ketchen, Daniel C. Ralph, Gerald W. Gisbon, Jr., Katrhyn A. Moler

Abstract: In the past, magnetic images acquired using scanning Superconducting Quantum Interference Device (SQUID) microscopy have been interpreted using simple models for the sensor point spread function. However, more complicated modeling is needed when the characteristic dimensions of the field sensitive areas in these sensors become comparable to the London penetration depth. In this paper we calculate… ▽ More In the past, magnetic images acquired using scanning Superconducting Quantum Interference Device (SQUID) microscopy have been interpreted using simple models for the sensor point spread function. However, more complicated modeling is needed when the characteristic dimensions of the field sensitive areas in these sensors become comparable to the London penetration depth. In this paper we calculate the response of SQUIDs with deep sub-micron pickup loops to different sources of magnetic fields by solving coupled London's and Maxwell's equations using the full sensor geometry. Tests of these calculations using various field sources are in reasonable agreement with experiments. These calculations allow us to more accurately interpret sub-micron spatial resolution data obtained using scanning SQUID microscopy. △ Less

Submitted 13 July, 2016; originally announced July 2016.

Comments: 15 pages, 9 figures

Scanning SQUID susceptometers with sub-micron spatial resolution

Authors: John R. Kirtley, Lisa Paulius, Aaron J. Rosenberg, Johanna C. Palmstrom, Connor M. Holland, Eric M. Spanton, Daniel Schiessl, Colin L. Jermain, Jonathan Gibbons, Y. -K. -K. Fung, Martin E. Huber, Daniel C. Ralph, Mark B. Ketchen, Gerald W. Gibson Jr., Kathryn A. Moler

Abstract: Superconducting QUantum Interference Device (SQUID) microscopy has excellent magnetic field sensitivity, but suffers from modest spatial resolution when compared with other scanning probes. This spatial resolution is determined by both the size of the field sensitive area and the spacing between this area and the sample surface. In this paper we describe scanning SQUID susceptometers that achieve… ▽ More Superconducting QUantum Interference Device (SQUID) microscopy has excellent magnetic field sensitivity, but suffers from modest spatial resolution when compared with other scanning probes. This spatial resolution is determined by both the size of the field sensitive area and the spacing between this area and the sample surface. In this paper we describe scanning SQUID susceptometers that achieve sub-micron spatial resolution while retaining a white noise floor flux sensitivity of $\approx 2μΦ_0/Hz^{1/2}$. This high spatial resolution is accomplished by deep sub-micron feature sizes, well shielded pickup loops fabricated using a planarized process, and a deep etch step that minimizes the spacing between the sample surface and the SQUID pickup loop. We describe the design, modeling, fabrication, and testing of these sensors. Although sub-micron spatial resolution has been achieved previously in scanning SQUID sensors, our sensors not only achieve high spatial resolution, but also have integrated modulation coils for flux feedback, integrated field coils for susceptibility measurements, and batch processing. They are therefore a generally applicable tool for imaging sample magnetization, currents, and susceptibilities with higher spatial resolution than previous susceptometers. △ Less

Submitted 25 July, 2016; v1 submitted 30 May, 2016; originally announced May 2016.

Comments: 13 figures

Electric coupling in scanning SQUID measurements

Authors: Eric M. Spanton, Aaron J. Rosenberg, Yihua H. Wang, John R. Kirtley, Ferhat Katmis, Pablo Jarillo-Herrero, Jagadeesh S. Moodera, Kathryn A. Moler

Abstract: Scanning SQUID is a local magnetometer which can image flux through its pickup loop due to DC magnetic fields ($Φ$). Scanning SQUID can also measure a sample's magnetic response to an applied current ($dΦ/dI$) or voltage ($dΦ/dV$) using standard lock-in techniques. In this manuscript, we demonstrate that electric coupling between the scanning SQUID and a back gate-tuned, magnetic sample can lead t… ▽ More Scanning SQUID is a local magnetometer which can image flux through its pickup loop due to DC magnetic fields ($Φ$). Scanning SQUID can also measure a sample's magnetic response to an applied current ($dΦ/dI$) or voltage ($dΦ/dV$) using standard lock-in techniques. In this manuscript, we demonstrate that electric coupling between the scanning SQUID and a back gate-tuned, magnetic sample can lead to a gate-voltage dependent artifact when imaging $dΦ/dI$ or $dΦ/dV$. The electric coupling artifact results in $dΦ/dV$ and $dΦ/dI$ images which mimic the spatial variation of the static magnetic fields from the sample (e.g. ferromagnetic domains). In back-gated $EuS/Bi_2Se_3$ bilayers, we show that the electric coupling effect is important, and is responsible for the reported signal from chiral currents in Y.H. Wang, et al. (DOI: 10.1126/science.aaa0508). Previous scanning SQUID current imaging experiments are unaffected by this artifact, as they are either on non-magnetic samples or the spatial distribution of magnetism does not match the features observed in $dΦ/dI$. In conclusion, $dΦ/dI$ or $dΦ/dV$ imaging of magnetic, back-gated samples should only be applied and interpreted with great caution. △ Less

Submitted 17 December, 2015; v1 submitted 10 December, 2015; originally announced December 2015.

Comments: This is a comment on Y.H. Wang, et al. (DOI: 10.1126/science.aaa0508), which has been retracted (DOI: 10.1126/science.350.6267.1482-a)

Silicon Superconducting Quantum Interference Device

Authors: Jean-Eudes Duvauchelle, Anaïs Francheteau, Christophe Marcenat, Francesca Chiodi, Dominique Débarre, Klaus Hasselbach, John R. Kirtley, François Lefloch

Abstract: We have studied a Superconducting Quantum Interference SQUID device made from a single layer thin film of superconducting silicon. The superconducting layer is obtained by heavily do** a silicon wafer with boron atoms using the Gas Immersion Laser Do** (GILD) technique. The SQUID device is composed of two nano-bridges (Dayem bridges) in a loop and shows magnetic flux modulation at low temperat… ▽ More We have studied a Superconducting Quantum Interference SQUID device made from a single layer thin film of superconducting silicon. The superconducting layer is obtained by heavily do** a silicon wafer with boron atoms using the Gas Immersion Laser Do** (GILD) technique. The SQUID device is composed of two nano-bridges (Dayem bridges) in a loop and shows magnetic flux modulation at low temperature and low magnetic field. The overall behavior shows very good agreement with numerical simulations based on the Ginzburg-Landau equations. △ Less

Submitted 17 August, 2015; originally announced August 2015.

Comments: Published in Applied Physics Letters (August 2015)

Journal ref: Appl. Phys. Lett. 107, 072601 (2015)

Observation of chiral currents at the magnetic domain boundary of a topological insulator

Authors: Y. H. Wang, J. R. Kirtley, F. Katmis, P. Jarillo-Herrero, J. S. Moodera, K. A. Moler

Abstract: A magnetic domain boundary on the surface of a three-dimensional topological insulator is predicted to host a chiral edge state, but direct demonstration is challenging. Here, we used a scanning superconducting quantum interference device to show that current in a magnetized EuS/Bi2Se3 heterostructure flows at the edge when the Fermi level is gate-tuned to the surface band gap. We further induced… ▽ More A magnetic domain boundary on the surface of a three-dimensional topological insulator is predicted to host a chiral edge state, but direct demonstration is challenging. Here, we used a scanning superconducting quantum interference device to show that current in a magnetized EuS/Bi2Se3 heterostructure flows at the edge when the Fermi level is gate-tuned to the surface band gap. We further induced micron-scale magnetic structures on the heterostructure, and detected a chiral edge current at the magnetic domain boundary. The chirality of the current was determined by magnetization of the surrounding domain and its magnitude by the local chemical potential rather than the applied current. Such magnetic structures, provide a platform for detecting topological magnetoelectric effects and may enable progress in quantum information processing and spintronics. △ Less

Submitted 14 August, 2015; originally announced August 2015.

Non-sinusoidal current-phase relationship in Josephson junctions from the 3D topological insulator HgTe

Authors: Ilya Sochnikov, Luis Maier, Christopher A. Watson, John R. Kirtley, Charles Gould, Grigory Tkachov, Ewelina M. Hankiewicz, Christoph Brüne, Hartmut Buhmann, Laurens W. Molenkamp, Kathryn A. Moler

Abstract: We use Superconducting QUantum Interference Device (SQUID) microscopy to characterize the current-phase relation (CPR) of Josephson Junctions from 3-dimentional topological insulator HgTe (3D-HgTe). We find clear skewness in the CPRs of HgTe junctions ranging in length from 200 nm to 600 nm. The skewness indicates that the Josephson current is predominantly carried by Andreev bound states with hig… ▽ More We use Superconducting QUantum Interference Device (SQUID) microscopy to characterize the current-phase relation (CPR) of Josephson Junctions from 3-dimentional topological insulator HgTe (3D-HgTe). We find clear skewness in the CPRs of HgTe junctions ranging in length from 200 nm to 600 nm. The skewness indicates that the Josephson current is predominantly carried by Andreev bound states with high transmittance, and the fact that the skewness persists in junctions that are longer than the mean free path suggests that the effect may be related to the helical nature of the Andreev bound states in the surface of HgTe. △ Less

Submitted 12 October, 2014; v1 submitted 4 October, 2014; originally announced October 2014.

Journal ref: Phys. Rev. Lett. 114, 066801 (2015)

Locally enhanced conductivity due to the tetragonal domain structure in LaAlO$_{3}$/SrTiO$_{3}$ heterointerfaces

Authors: Beena Kalisky, Eric M. Spanton, Hilary Noad, John R. Kirtley, Katja C. Nowack, Christopher Bell, Hiroki K. Sato, Masayuki Hosoda, Yanwu Xie, Yasuyuki Hikita, Carsten Woltmann, Georg Pfanzelt, Rainer Jany, Christoph Richter, Harold Y. Hwang, Jochen Mannhart, Kathryn A. Moler

Abstract: The ability to control materials properties through interface engineering is demonstrated by the appearance of conductivity at the interface of certain insulators, most famously the {001} interface of the band insulators LaAlO$_{3}$ and TiO$_{2}$-terminated SrTiO$_{3}$ (STO). Transport and other measurements in this system show a plethora of diverse physical phenomena. To better understand the int… ▽ More The ability to control materials properties through interface engineering is demonstrated by the appearance of conductivity at the interface of certain insulators, most famously the {001} interface of the band insulators LaAlO$_{3}$ and TiO$_{2}$-terminated SrTiO$_{3}$ (STO). Transport and other measurements in this system show a plethora of diverse physical phenomena. To better understand the interface conductivity, we used scanning superconducting quantum interference device microscopy to image the magnetic field locally generated by current in an interface. At low temperature, we found that the current flowed in conductive narrow paths oriented along the crystallographic axes, embedded in a less conductive background. The configuration of these paths changed on thermal cycling above the STO cubic-to-tetragonal structural transition temperature, implying that the local conductivity is strongly modified by the STO tetragonal domain structure. The interplay between substrate domains and the interface provides an additional mechanism for understanding and controlling the behaviour of heterostructures. △ Less

Submitted 11 December, 2013; originally announced December 2013.

Journal ref: Nature Materials 12, 1091-1095 (2013)

Imaging currents in HgTe quantum wells in the quantum spin Hall regime

Authors: Katja C. Nowack, Eric M. Spanton, Matthias Baenninger, Markus König, John R. Kirtley, Beena Kalisky, C. Ames, Philipp Leubner, Christoph Brüne, Hartmut Buhmann, Laurens W. Molenkamp, David Goldhaber-Gordon, Kathryn A. Moler

Abstract: The quantum spin Hall (QSH) state is a genuinely new state of matter characterized by a non-trivial topology of its band structure. Its key feature is conducting edge channels whose spin polarization has potential for spintronic and quantum information applications. The QSH state was predicted and experimentally demonstrated to exist in HgTe quantum wells. The existence of the edge channels has be… ▽ More The quantum spin Hall (QSH) state is a genuinely new state of matter characterized by a non-trivial topology of its band structure. Its key feature is conducting edge channels whose spin polarization has potential for spintronic and quantum information applications. The QSH state was predicted and experimentally demonstrated to exist in HgTe quantum wells. The existence of the edge channels has been inferred from the fact that local and non-local conductance values in sufficiently small devices are close to the quantized values expected for ideal edge channels and from signatures of the spin polarization. The robustness of the edge channels in larger devices and the interplay between the edge channels and a conducting bulk are relatively unexplored experimentally, and are difficult to assess via transport measurements. Here we image the current in large Hallbars made from HgTe quantum wells by probing the magnetic field generated by the current using a scanning superconducting quantum interference device (SQUID). We observe that the current flows along the edge of the device in the QSH regime, and furthermore that an identifiable edge channel exists even in the presence of disorder and considerable bulk conduction as the device is gated or its temperature is raised. Our results represent a versatile method for the characterization of new quantum spin Hall materials systems, and confirm both the existence and the robustness of the predicted edge channels. △ Less

Submitted 13 December, 2012; v1 submitted 10 December, 2012; originally announced December 2012.

Comments: 11 pages, 4 figures; v2: link to supplementary information added, see http://www.stanford.edu/group/moler/publications.html

Measurements of the gate tuned superfluid density in superconducting LaAlO3/SrTiO3

Authors: Julie A. Bert, Katja C. Nowack, Beena Kalisky, Hilary Noad, John R. Kirtley, Chris Bell, Hiroki K. Sato, Masayuki Hosoda, Yasayuki Hikita, Harold Y. Hwang, Kathryn A. Moler

Abstract: The interface between the insulating oxides LaAlO3 and SrTiO3 exhibits a superconducting two-dimensional electron system that can be modulated by a gate voltage. While gating of the conductivity has been probed extensively and gating of the superconducting critical temperature has been demonstrated, the question whether, and if so how, the gate tunes the superfluid density and superconducting orde… ▽ More The interface between the insulating oxides LaAlO3 and SrTiO3 exhibits a superconducting two-dimensional electron system that can be modulated by a gate voltage. While gating of the conductivity has been probed extensively and gating of the superconducting critical temperature has been demonstrated, the question whether, and if so how, the gate tunes the superfluid density and superconducting order parameter is unanswered. We present local magnetic susceptibility, related to the superfluid density, as a function of temperature, gate voltage and location. We show that the temperature dependence of the superfluid density at different gate voltages collapse to a single curve characteristic of a full superconducting gap. Further, we show that the dipole moments observed in this system are not modulated by the gate voltage. △ Less

Submitted 17 May, 2012; originally announced May 2012.

Scanning SQUID Susceptometry of a paramagnetic superconductor

Authors: J. R. Kirtley, B. Kalisky, J. A. Bert, C. Bell, Y. Hikita, H. Y. Hwang, J. H. Ngai, Y. Segal, F. J. Walker, C. H. Ahn, K. A. Moler

Abstract: Scanning SQUID susceptometry images the local magnetization and susceptibility of a sample. By accurately modeling the SQUID signal we can determine the physical properties such as the penetration depth and permeability of superconducting samples. We calculate the scanning SQUID susceptometry signal for a superconducting slab of arbitrary thickness with isotropic London penetration depth, on a non… ▽ More Scanning SQUID susceptometry images the local magnetization and susceptibility of a sample. By accurately modeling the SQUID signal we can determine the physical properties such as the penetration depth and permeability of superconducting samples. We calculate the scanning SQUID susceptometry signal for a superconducting slab of arbitrary thickness with isotropic London penetration depth, on a non-superconducting substrate, where both slab and substrate can have a paramagnetic response that is linear in the applied field. We derive analytical approximations to our general expression in a number of limits. Using our results, we fit experimental susceptibility data as a function of the sample-sensor spacing for three samples: 1) delta-doped SrTiO3, which has a predominantly diamagnetic response, 2) a thin film of LaNiO3, which has a predominantly paramagnetic response, and 3) a two-dimensional electron layer (2-DEL) at a SrTiO3/AlAlO3 interface, which exhibits both types of response. These formulas will allow the determination of the concentrations of paramagnetic spins and superconducting carriers from fits to scanning SQUID susceptibility measurements. △ Less

Submitted 15 April, 2012; originally announced April 2012.

Comments: 11 pages, 13 figures

Meissner response of superconductors with inhomogeneous penetration depths

Authors: V. G. Kogan, J. R. Kirtley

Abstract: We discuss the Meissner response to a known field source of superconductors having inhomogeneities in their penetration depth. We simplify the general problem by assuming that the perturbations of the fields by the penetration depth inhomogeneities are small. We present expressions for inhomogeneities in several geometries, but concentrate for comparison with experiment on planar defects, perpendi… ▽ More We discuss the Meissner response to a known field source of superconductors having inhomogeneities in their penetration depth. We simplify the general problem by assuming that the perturbations of the fields by the penetration depth inhomogeneities are small. We present expressions for inhomogeneities in several geometries, but concentrate for comparison with experiment on planar defects, perpendicular to the sample surfaces, with superfluid densities different from the rest of the samples. These calculations are relevant for magnetic microscopies, such as Scanning Superconducting Quantum Interference Device (SQUID) and Magnetic Force Microscope, which image the local diamagnetic susceptibility of a sample. △ Less

Submitted 24 March, 2011; v1 submitted 23 March, 2011; originally announced March 2011.

Comments: 9 pages, 4 figures

Half-Integer Flux Quantization in Unconventional Superconductors

Authors: C. C. Tsuei, J. R. Kirtley

Abstract: In this article, we wish to give a historical and personal account of the advent of our tricrystal phase-sensitive symmetry experiments using scanning SQUID microscope for establishing d-wave pairing symmetry in the cuprate superconductors. On the occasion of commemorating the 100th anniversary of the discovery of superconductivity by Kamerlingh Onnes, we are honored to present this article as par… ▽ More In this article, we wish to give a historical and personal account of the advent of our tricrystal phase-sensitive symmetry experiments using scanning SQUID microscope for establishing d-wave pairing symmetry in the cuprate superconductors. On the occasion of commemorating the 100th anniversary of the discovery of superconductivity by Kamerlingh Onnes, we are honored to present this article as part of the Jubilee Celebration. △ Less

Submitted 9 January, 2011; originally announced January 2011.

Comments: 19 pages, 10 figures; Invited paper submitted for a book entitled "100 Years of Superconductivity", edited by H. Rogalla and P. Kes; Corresponding author: Chang C. Tsuei (tsuei at us.ibm.com)

Behavior of vortices near twin boundaries in underdoped $Ba(Fe_{1-x}Co_{x})_{2}As_{2}$

Authors: B. Kalisky, J. R. Kirtley, J. G. Analytis, J. -H. Chu, I. R. Fisher, K. A. Moler

Abstract: We use scanning SQUID microscopy to investigate the behavior of vortices in the presence of twin boundaries in the pnictide superconductor Ba(Fe1-xCox)2As2. We show that the vortices avoid pinning on twin boundaries. Individual vortices move in a preferential way when manipulated with the SQUID: they tend to not cross a twin boundary, but rather to move parallel to it. This behavior can be explain… ▽ More We use scanning SQUID microscopy to investigate the behavior of vortices in the presence of twin boundaries in the pnictide superconductor Ba(Fe1-xCox)2As2. We show that the vortices avoid pinning on twin boundaries. Individual vortices move in a preferential way when manipulated with the SQUID: they tend to not cross a twin boundary, but rather to move parallel to it. This behavior can be explained by the observation of enhanced superfluid density on twin boundaries in Ba(Fe1-xCox)2As2. The observed repulsion from twin boundaries may be a mechanism for enhanced critical currents observed in twinned samples in pnictides and other superconductors. △ Less

Submitted 20 December, 2010; originally announced December 2010.

Probing the order parameter symmetry in the cuprate high temperature superconductors by SQUID microscopy

Authors: John R. Kirtley

Abstract: The orbital component of the order parameter in the cuprate high-Tc cuprate superconductors is now well established, in large part because of phase sensitive tests. Although it would be desirable to use such tests on other unconventional superconductors, there are a number of favorable factors associated with the properties of the cuprates, and a number of technical advances, that were required fo… ▽ More The orbital component of the order parameter in the cuprate high-Tc cuprate superconductors is now well established, in large part because of phase sensitive tests. Although it would be desirable to use such tests on other unconventional superconductors, there are a number of favorable factors associated with the properties of the cuprates, and a number of technical advances, that were required for these tests to be successful. In this review I will describe the development of phase sensitive pairing symmetry tests using SQUID microscopy, underlining the factors favoring these experiments in the cuprates and the technical advances that had to be made. △ Less

Submitted 19 August, 2010; originally announced August 2010.

Comments: 12 pages, 7 figure, invited review to be published in Comptes Rendus de l'Academie des Sciences (Comptes Rendus Physique)

Fundamental studies of superconductors using scanning magnetic imaging

Authors: J. R. Kirtley

Abstract: In this review I discuss the application of scanning magnetic imaging to fundamental studies of superconductors, concentrating on three scanning magnetic microscopies - scanning SQUID microscopy (SSM), scanning Hall bar microscopy (SHM), and magnetic force microscopy (MFM). I briefly discuss the history, sensitivity, spatial resolution, invasiveness, and potential future developments of each techn… ▽ More In this review I discuss the application of scanning magnetic imaging to fundamental studies of superconductors, concentrating on three scanning magnetic microscopies - scanning SQUID microscopy (SSM), scanning Hall bar microscopy (SHM), and magnetic force microscopy (MFM). I briefly discuss the history, sensitivity, spatial resolution, invasiveness, and potential future developments of each technique. I then discuss a selection of applications of these microscopies. △ Less

Submitted 18 August, 2010; originally announced August 2010.

Comments: 59 pages, 31 figures, to be published in Reports on Progress in Physics

Limits on Superconductivity-Related Magnetization in Sr$_2$RuO$_4$ and PrOs$_4$Sb$_{12}$ from Scanning SQUID Microscopy

Authors: Clifford W. Hicks, John R. Kirtley, Thomas M. Lippman, Nicholas C. Koshnick, Martin E. Huber, Yoshiteru Maeno, William M. Yuhasz, M. Brian Maple, Kathryn A. Moler

Abstract: We present scanning SQUID microscopy data on the superconductors Sr2RuO4 (Tc = 1.5 K) and PrOs$_4$Sb$_{12}$ (Tc = 1.8 K). In both of these materials, superconductivity-related time-reversal symmetry-breaking fields have been observed by muon spin rotation; our aim was to visualize the structure of these fields. However in neither Sr$_2$RuO$_4$ nor PrOs$_4$Sb$_{12}$ do we observe spontaneous superc… ▽ More We present scanning SQUID microscopy data on the superconductors Sr2RuO4 (Tc = 1.5 K) and PrOs$_4$Sb$_{12}$ (Tc = 1.8 K). In both of these materials, superconductivity-related time-reversal symmetry-breaking fields have been observed by muon spin rotation; our aim was to visualize the structure of these fields. However in neither Sr$_2$RuO$_4$ nor PrOs$_4$Sb$_{12}$ do we observe spontaneous superconductivity-related magnetization. In Sr$_2$RuO$_4$, many experimental results have been interpreted on the basis of a $px \pm ipy$ superconducting order parameter. This order parameter is expected to give spontaneous magnetic induction at sample edges and order parameter domain walls. Supposing large domains, our data restrict domain wall and edge fields to no more than ~0.1% and ~0.2% of the expected magnitude, respectively. Alternatively, if the magnetization is of the expected order, the typical domain size is limited to ~30 nm for random domains, or ~500 nm for periodic domains. △ Less

Submitted 10 March, 2010; originally announced March 2010.

Comments: 8 pages, 7 figures. Submitted to Phys. Rev. B

Journal ref: Phys. Rev. B vol. 81 214501 (2010)

Design concepts for an improved integrated scanning SQUID

Authors: Nicholas C. Koshnick, John R. Kirtley, Kathryn A. Moler

Abstract: In this paper we discuss design concepts for increasing the spatial resolution, improving the sensitivity, and reducing the invasiveness in scanning Superconducting Quantum Interference Device (SQUID) microscope sensors with integrated flux pickup loops. This can be done not only by reducing the ground-rule line widths and spacings, but also by taking advantage of planarization, reducing flux no… ▽ More In this paper we discuss design concepts for increasing the spatial resolution, improving the sensitivity, and reducing the invasiveness in scanning Superconducting Quantum Interference Device (SQUID) microscope sensors with integrated flux pickup loops. This can be done not only by reducing the ground-rule line widths and spacings, but also by taking advantage of planarization, reducing flux noise through reducing the SQUID inductance, and reducing back-action through dispersive readouts or on-chip filtering. △ Less

Submitted 7 February, 2010; originally announced February 2010.

Comments: 10 pages, 2 figures

Meissner response of a bulk superconductor with an embedded sheet of reduced penetration depth

Authors: J. R. Kirtley, B. Kalisky, L. Luan, K. A. Moler

Abstract: We calculate the change in susceptibility resulting from a thin sheet with reduced penetration depth embedded perpendicular to the surface of an isotropic superconductor, in a geometry applicable to scanning Superconducting QUantum Interference Device (SQUID) microscopy, by numerically solving Maxwell's and London's equations using the finite element method. The predicted stripes in susceptibili… ▽ More We calculate the change in susceptibility resulting from a thin sheet with reduced penetration depth embedded perpendicular to the surface of an isotropic superconductor, in a geometry applicable to scanning Superconducting QUantum Interference Device (SQUID) microscopy, by numerically solving Maxwell's and London's equations using the finite element method. The predicted stripes in susceptibility agree well in shape with the observations of Kalisky et al. of enhanced susceptibility above twin planes in the underdoped pnictide superconductor Ba(Fe1-xCox)2As2 (Ba-122). By comparing the predicted stripe amplitudes with experiment and using the London relation between penetration depth and superfluid density, we estimate the enhanced Cooper pair density on the twin planes, and the barrier force for a vortex to cross a twin plane. Fits to the observed temperature dependence of the stripe amplitude suggest that the twin planes have a higher critical temperature than the bulk, although stripes are not observed above the bulk critical temperature. △ Less

Submitted 16 December, 2009; v1 submitted 5 December, 2009; originally announced December 2009.

Comments: 16 pages, 9 figures

Local measurement of the penetration depth in the pnictide superconductor Ba(Fe$_{0.95}$Co$_{0.05}$)$_2$As$_2$

Authors: Lan Luan, Ophir M. Auslaender, Thomas M. Lippman, Clifford W. Hicks, Beena Kalisky, Jiun-Haw Chu, James G. Analytis, Ian R. Fisher, John R. Kirtley, Kathryn A. Moler

Abstract: We use magnetic force microscopy (MFM) and scanning SQUID susceptometry to measure the local superfluid density $ρ_{s}$ in Ba(Fe$_{0.95}$Co$_{0.05}$)$_2$As$_2$ single crystals from 0.4 K to the critical temperature $T_c=18.5$ K. We observe that the penetration depth $λ$ varies about ten times more slowly with temperature than previously published, with a dependence that can be well described by… ▽ More We use magnetic force microscopy (MFM) and scanning SQUID susceptometry to measure the local superfluid density $ρ_{s}$ in Ba(Fe$_{0.95}$Co$_{0.05}$)$_2$As$_2$ single crystals from 0.4 K to the critical temperature $T_c=18.5$ K. We observe that the penetration depth $λ$ varies about ten times more slowly with temperature than previously published, with a dependence that can be well described by a clean two-band fully gapped model. We demonstrate that MFM can measure the important and hard-to-determine absolute value of $λ$, as well as obtain its temperature dependence and spatial homogeneity. We find $ρ_{s}$ to be uniform despite the highly disordered vortex pinning. △ Less

Submitted 13 January, 2010; v1 submitted 3 September, 2009; originally announced September 2009.

Journal ref: Phys. Rev. B 81, 100501(R) (2010)

Two-dimensional electron liquid state at LaAlO3-SrTiO3 interfaces

Authors: M. Breitschaft, V. Tinkl, N. Pavlenko, S. Thiel, C. Richter, J. R. Kirtley, Y. C. Liao, G. Hammerl, V. Eyert, T. Kopp, J. Mannhart

Abstract: Using tunneling spectroscopy we have measured the spectral density of states of the mobile, two-dimensional electron system generated at the LaAlO3-SrTiO3 interface. As shown by the density of states the interface electron system differs qualitatively, first, from the electron systems of the materials defining the interface and, second, from the two-dimensional electron gases formed at interfaces… ▽ More Using tunneling spectroscopy we have measured the spectral density of states of the mobile, two-dimensional electron system generated at the LaAlO3-SrTiO3 interface. As shown by the density of states the interface electron system differs qualitatively, first, from the electron systems of the materials defining the interface and, second, from the two-dimensional electron gases formed at interfaces between conventional semiconductors. △ Less

Submitted 4 May, 2010; v1 submitted 7 July, 2009; originally announced July 2009.

Journal ref: Phys. Rev. B 81, 153414 (2010)

Enhanced superfluid density on twin boundaries in Ba(Fe1-xCox)2As2

Authors: Beena Kalisky, John R. Kirtley, James G. Analytis, Jiun-Haw Chu, Arturas Vailionis, Ian R. Fisher, Kathryn A. Moler

Abstract: Superconducting quantum interference device (SQUID) microscopy shows stripes of increased diamagnetic susceptibility in underdoped, but not overdoped, single crystals of Ba(Fe1-xCox)2As2. These stripes of increased diamagnetic susceptibility are consistent with enhanced superfluid density on twin boundaries. Individual vortices avoid pinning on or crossing the stripes, and prefer to travel paral… ▽ More Superconducting quantum interference device (SQUID) microscopy shows stripes of increased diamagnetic susceptibility in underdoped, but not overdoped, single crystals of Ba(Fe1-xCox)2As2. These stripes of increased diamagnetic susceptibility are consistent with enhanced superfluid density on twin boundaries. Individual vortices avoid pinning on or crossing the stripes, and prefer to travel parallel to them. These results indicate a relationship between superfluid density, local strain, and frustrated magnetism, and demonstrate two mechanisms for enhancing critical currents. △ Less

Submitted 11 August, 2009; v1 submitted 28 June, 2009; originally announced June 2009.

Comments: 16 pages, 4 figures

Dynamics of single vortices in grain boundaries: I-V characteristics on the femto-volt scale

Authors: B. Kalisky, J. R. Kirtley, E. A. Nowadnick, R. B. Dinner, E. Zeldov, Ariando, S. Wenderich, H. Hilgenkamp, D. M. Feldmann, K. A. Moler

Abstract: We employed a scanning Hall probe microscope to detect the hop** of individual vortices between pinning sites along grain boundaries in YBCO thin films in the presence of an applied current. Detecting the motion of individual vortices allowed us to probe the current-voltage (I-V) characteristics of the grain boundary with voltage sensitivity below a femto-volt. We find a very sharp onset of di… ▽ More We employed a scanning Hall probe microscope to detect the hop** of individual vortices between pinning sites along grain boundaries in YBCO thin films in the presence of an applied current. Detecting the motion of individual vortices allowed us to probe the current-voltage (I-V) characteristics of the grain boundary with voltage sensitivity below a femto-volt. We find a very sharp onset of dissipation with V~I^n with an unprecedented high exponent of n~290 that shows essentially no dependence on temperature or grain boundary angle. Our data have no straightforward explanation within the existing grain boundary transport models. △ Less

Submitted 18 March, 2009; originally announced March 2009.

Journal ref: Applied Physics Letters 94 202504 (2009)

Vortex Trap** in Hybrid Magnetometers

Authors: K. H. Kuit, J. R. Kirtley, H. Rogalla, J. Flokstra

Abstract: Hybrid magnetometers based on a normal conducting sensor and a superconducting flux concentrator have been investigated. When this sensor is operated in an unshielded environment flux vortices can be trapped in the superconducting body when the sensor is cooled. Thermal hop** of the trapped vortices gives rise to 1/f noise. The mechanism for vortex trap** has been investigated. A new model f… ▽ More Hybrid magnetometers based on a normal conducting sensor and a superconducting flux concentrator have been investigated. When this sensor is operated in an unshielded environment flux vortices can be trapped in the superconducting body when the sensor is cooled. Thermal hop** of the trapped vortices gives rise to 1/f noise. The mechanism for vortex trap** has been investigated. A new model for the critical field for vortex trap** and vortex densities has been derived. Experimental verification on YBa2Cu3O7-delta (YBCO) strips with a Scanning SQUID Microscope shows very good agreement between measurements and the new theory. The results have been applied in a hybrid magnetometer design based on a bismuth Hall sensor and an YBCO flux concentrator. Measurements show a field gain up to G=7 with a large effective range of 175uT. △ Less

Submitted 18 September, 2008; originally announced September 2008.

Vortex trap** and expulsion in thin-film type-II superconducting strips

Authors: K. H. Kuit, J. R. Kirtley, J. R. Clem, H. Rogalla, J. Flokstra

Abstract: Vortex trap** is investigated in thin-film strips of superconducting material. We present a model for the critical field above which vortex trap** occurs in these strips. This model includes the pairing energy of vortex-antivortex pairs in addition to the energy of single vortices. Experimental verification of the model with a scanning SQUID microscope shows very good agreement between the m… ▽ More Vortex trap** is investigated in thin-film strips of superconducting material. We present a model for the critical field above which vortex trap** occurs in these strips. This model includes the pairing energy of vortex-antivortex pairs in addition to the energy of single vortices. Experimental verification of the model with a scanning SQUID microscope shows very good agreement between the model and experiments on YBa2Cu3O7-delta and Nb strips. Statistical analysis of the vortex distribution in the strips above the critical field has been performed and a comparison has been made between Nb and YBa2Cu3O7-delta for the distributions in the lateral and longitudinal directions. △ Less

Submitted 17 September, 2008; originally announced September 2008.

Vortex trap** and expulsion in thin-film YBCO strips

Authors: K. H. Kuit, J. R. Kirtley, W. van der Veur, C. G. Molenaar, F. J. G. Roesthuis, A. G. P. Troeman, J. R. Clem, H. Hilgenkamp, H. Rogalla, J. Flokstra

Abstract: A scanning SQUID microscope was used to image vortex trap** as a function of the magnetic induction during cooling in thin-film YBCO strips for strip widths W from 2 to 50 um. We found that vortices were excluded from the strips when the induction Ba was below a critical induction Bc. We present a simple model for the vortex exclusion process which takes into account the vortex - antivortex pa… ▽ More A scanning SQUID microscope was used to image vortex trap** as a function of the magnetic induction during cooling in thin-film YBCO strips for strip widths W from 2 to 50 um. We found that vortices were excluded from the strips when the induction Ba was below a critical induction Bc. We present a simple model for the vortex exclusion process which takes into account the vortex - antivortex pair production energy as well as the vortex Meissner and self-energies. This model predicts that the real density n of trapped vortices is given by n=(Ba-BK)/Phi0 with BK = 1.65Phi0/W^2 and Phi0 = h/2e the superconducting flux quantum. This prediction is in good agreement with our experiments on YBCO, as well as with previous experiments on thin-film strips of niobium. We also report on the positions of the trapped vortices. We found that at low densities the vortices were trapped in a single row near the centers of the strips, with the relative intervortex spacing distribution width decreasing as the vortex density increased, a sign of longitudinal ordering. The critical induction for two rows forming in the 35 um wide strip was (2.89 + 1.91-0.93)Bc, consistent with a numerical prediction. △ Less

Submitted 15 January, 2008; originally announced January 2008.

Upper limit on spontaneous supercurrents in Sr$_2$RuO$_4$

Authors: J. R. Kirtley, C. Kallin, C. W. Hicks, E. -A. Kim, Y. Liu, K. A. Moler, Y. Maeno, K. D. Nelson

Abstract: It is widely believed that the perovskite Sr$_2$RuO$_4$ is an unconventional superconductor with broken time reversal symmetry. It has been predicted that superconductors with broken time reversal symmetry should have spontaneously generated supercurrents at edges and domain walls. We have done careful imaging of the magnetic fields above Sr$_2$RuO$_4$ single crystals using scanning Hall bar and… ▽ More It is widely believed that the perovskite Sr$_2$RuO$_4$ is an unconventional superconductor with broken time reversal symmetry. It has been predicted that superconductors with broken time reversal symmetry should have spontaneously generated supercurrents at edges and domain walls. We have done careful imaging of the magnetic fields above Sr$_2$RuO$_4$ single crystals using scanning Hall bar and SQUID microscopies, and see no evidence for such spontaneously generated supercurrents. We use the results from our magnetic imaging to place upper limits on the spontaneously generated supercurrents at edges and domain walls as a function of domain size. For a single domain, this upper limit is below the predicted signal by two orders of magnitude. We speculate on the causes and implications of the lack of large spontaneous supercurrents in this very interesting superconducting system. △ Less

Submitted 25 April, 2007; originally announced April 2007.

Comments: 9 pages

Journal ref: Phys. Rev. B 76, 014526 (2007)

Moment switching in nanotube magnetic force probes

Authors: John R. Kirtley, Zhifeng Deng, Lan Luan, Erhan Yenilmez, Hongjie Dai, Kathryn A. Moler

Abstract: A recent advance in improving the spatial resolution of magnetic force microscopy (MFM) uses as sensor tips carbon nanotubes grown at the apex of conventional silicon cantilever pyramids and coated with a thin ferromagnetic layer. Magnetic images of high density vertically recorded media using these tips exhibit a doubling of the spatial frequency under some conditions. Here we demonstrate that… ▽ More A recent advance in improving the spatial resolution of magnetic force microscopy (MFM) uses as sensor tips carbon nanotubes grown at the apex of conventional silicon cantilever pyramids and coated with a thin ferromagnetic layer. Magnetic images of high density vertically recorded media using these tips exhibit a doubling of the spatial frequency under some conditions. Here we demonstrate that this spatial frequency doubling is due to the switching of the moment direction of the nanotube tip. This results in a signal which is proportional to the absolute value of the signal normally observed in MFM. Our modeling indicates that a significant fraction of the tip volume is involved in the observed switching, and that it should be possible to image very high bit densities with nanotube magnetic force sensors. △ Less

Submitted 3 April, 2007; originally announced April 2007.

Comments: 10 pages

Macroscopic quantum tunneling and quasiparticle-tunneling blockade effect in s-wave/d-wave hybrid junctions

Authors: S. Kawabata, A. A. Golubov, Ariando, C. J. M. Verwijs, H. Hilgenkamp, J. R. Kirtley

Abstract: We have theoretically investigated macroscopic quantum tunneling (MQT) and the influence of nodal quasiparticles and zero energy bound states (ZES) on MQT in s-wave/ d-wave hybrid Josephson junctions. In contrast to d-wave/d-wave junctions, the low-energy quasiparticle dissipation resulting from nodal quasiparticles and ZES is suppressed due to a quasiparticle-tunneling blockade effect in an iso… ▽ More We have theoretically investigated macroscopic quantum tunneling (MQT) and the influence of nodal quasiparticles and zero energy bound states (ZES) on MQT in s-wave/ d-wave hybrid Josephson junctions. In contrast to d-wave/d-wave junctions, the low-energy quasiparticle dissipation resulting from nodal quasiparticles and ZES is suppressed due to a quasiparticle-tunneling blockade effect in an isotropic s-wave superconductor. Therefore, the inherent dissipation in these junctions is found to be very weak. We have also investigated MQT in a realistic s-wave/d-wave (Nb/Au/YBCO) junction in which Ohmic dissipation in a shunt resistance is stronger than the inherent dissipation and find that MQT is observable within the current experimental technology. This result suggests high potential of s-wave/d-wave hybrid junctions for applications in quantum information devices. △ Less

Submitted 16 November, 2009; v1 submitted 20 February, 2007; originally announced February 2007.

Comments: 4 pages, 3 figures

Journal ref: Phys. Rev. B 76 (2007) 064505

Experiments using high-Tc/low-Tc Josephson contacts

Authors: Ariando, H. J. H. Smilde, C. J. M. Verwijs, G. Rijnders, D. H. A. Blank, H. Rogalla, J. R. Kirtley, C. C. Tsuei, H. Hilgenkamp

Abstract: Remarkably rich physics is involved in the behavior of hybrid Josephson junctions, connecting high-Tc and low-Tc superconductors. This relates in particular to the different order parameter symmetries underlying the formation of the superconducting states in these materials. Experiments on high-Tc/low-Tc contacts have also played a crucial role in settling the decade-long d-wave versus s-wave de… ▽ More Remarkably rich physics is involved in the behavior of hybrid Josephson junctions, connecting high-Tc and low-Tc superconductors. This relates in particular to the different order parameter symmetries underlying the formation of the superconducting states in these materials. Experiments on high-Tc/low-Tc contacts have also played a crucial role in settling the decade-long d-wave versus s-wave debate in cuprate superconductors. Recently, such hybrid junctions have enabled more detailed pairing symmetry tests. Furthermore, with these junctions, complex arrays of pi-rings have been realized, enabling studies on spontaneously generated fractional flux quanta and their mutual interactions. Steps toward novel superconducting electronic devices are taken, utilizing the phase-shifts inherent to the d-wave superconducting order parameter. This paper is intended to reflect the current status of experiments using high-Tc and low-Tc Josephson contacts. △ Less

Submitted 11 August, 2006; v1 submitted 9 June, 2006; originally announced June 2006.

Comments: 25 pages, 10 figures, to appear in "Electron Correlation in New Materials and Nanosystems", NATO Science Series II, Springer, 2006

Dissipation in ultra-thin current-carrying superconducting bridges; evidence for quantum tunneling of Pearl vortices

Authors: F. Tafuri, J. R. Kirtley, D. Born, D. Stornaiuolo, P. G. Medaglia, P. Orgiani, G. Balestrino, V. G. Kogan

Abstract: We have made current-voltage (IV) measurements of artificially layered high-$T_c$ thin-film bridges. Scanning SQUID microscopy of these films provides values for the Pearl lengths $Λ$ that exceed the bridge width, and shows that the current distributions are uniform across the bridges. At high temperatures and high currents the voltages follow the power law $V \propto I^n$, with… ▽ More We have made current-voltage (IV) measurements of artificially layered high-$T_c$ thin-film bridges. Scanning SQUID microscopy of these films provides values for the Pearl lengths $Λ$ that exceed the bridge width, and shows that the current distributions are uniform across the bridges. At high temperatures and high currents the voltages follow the power law $V \propto I^n$, with $n=Φ_0^2/8π^2Λk_B T+1$, and at high temperatures and low-currents the resistance is exponential in temperature, in good agreement with the predictions for thermally activated vortex motion. At low temperatures, the IV's are better fit by $\ln V$ linear in $I^{-2}$. This is expected if the low temperature dissipation is dominated by quantum tunneling of Pearl vortices. △ Less

Submitted 6 April, 2005; originally announced April 2005.

Comments: 5 pages, 7 figs

Anti-ferromagnetic ordering in arrays of superconducting pi-rings

Authors: J. R. Kirtley, C. C. Tsuei, Ariando, H. -J. H. Smilde, H. Hilgenkamp

Abstract: We report experiments in which one dimensional (1D) and two dimensional (2D) arrays of YBa2Cu3O7-x-Nb pi-rings are cooled through the superconducting transition temperature of the Nb in various magnetic fields. These pi-rings have degenerate ground states with either clockwise or counter-clockwise spontaneous circulating supercurrents. The final flux state of each ring in the arrays was determin… ▽ More We report experiments in which one dimensional (1D) and two dimensional (2D) arrays of YBa2Cu3O7-x-Nb pi-rings are cooled through the superconducting transition temperature of the Nb in various magnetic fields. These pi-rings have degenerate ground states with either clockwise or counter-clockwise spontaneous circulating supercurrents. The final flux state of each ring in the arrays was determined using scanning SQUID microscopy. In the 1D arrays, fabricated as a single junction with facets alternating between alignment parallel to a [100] axis of the YBCO and rotated 90 degrees to that axis, half-fluxon Josephson vortices order strongly into an arrangement with alternating signs of their magnetic flux. We demonstrate that this ordering is driven by phase coupling and model the cooling process with a numerical solution of the Sine-Gordon equation. The 2D ring arrays couple to each other through the magnetic flux generated by the spontaneous supercurrents. Using pi-rings for the 2D flux coupling experiments eliminates one source of disorder seen in similar experiments using conventional superconducting rings, since pi-rings have doubly degenerate ground states in the absence of an applied field. Although anti-ferromagnetic ordering occurs, with larger negative bond orders than previously reported for arrays of conventional rings, long-range order is never observed, even in geometries without geometric frustration. This may be due to dynamical effects. Monte-Carlo simulations of the 2D array cooling process are presented and compared with experiment. △ Less

Submitted 10 March, 2005; originally announced March 2005.

Comments: 10 pages, 15 figures

Low-bandwidth control scheme for an oscillator stabilized Josephson qubit

Authors: R. H. Koch, J. R. Rozen, G. A. Keefe, F. M. Milliken, C. C. Tsuei, J. R. Kirtley, D. P. DiVincenzo

Abstract: We introduce a new Josephson junction circuit for which quantum operations are realized by low-bandwidth, nearly adiabatic magnetic-flux pulses. Coupling to the fundamental mode of a superconducting transmission line permits a stabilization of the rotation angle of the quantum operation against flux noise. A complete scheme for one-qubit rotations, and high-visibility Ramsey-fringe oscillations,… ▽ More We introduce a new Josephson junction circuit for which quantum operations are realized by low-bandwidth, nearly adiabatic magnetic-flux pulses. Coupling to the fundamental mode of a superconducting transmission line permits a stabilization of the rotation angle of the quantum operation against flux noise. A complete scheme for one-qubit rotations, and high-visibility Ramsey-fringe oscillations, is given. We show that high visibility depends on passing through a portal in the space of applied fluxes, where the width of the portal is proportional to the ramp-up rate of the flux pulse. △ Less

Submitted 15 November, 2004; originally announced November 2004.

Comments: 5 pages, pdflatex

Half - h/2e - Oscillations of SQUIDs

Authors: C. W. Schneider, G. Hammerl, G. Logvenov, T. Kopp, J. R. Kirtley, P. J. Hirschfeld, J. Mannhart

Abstract: The current-voltage characteristics of Superconducting Quantum Interference Devices (SQUIDs) are known to modulate as a function of applied magnetic field with a period of one flux quantum $Φ_0=h$/2e. Here we report on the fabrication and properties of SQUIDs modulating with a period of $1/2\timesΦ_0$. The characteristics of these bicrystal SQUIDs are consistent with either a strong sin(2$φ$) co… ▽ More The current-voltage characteristics of Superconducting Quantum Interference Devices (SQUIDs) are known to modulate as a function of applied magnetic field with a period of one flux quantum $Φ_0=h$/2e. Here we report on the fabrication and properties of SQUIDs modulating with a period of $1/2\timesΦ_0$. The characteristics of these bicrystal SQUIDs are consistent with either a strong sin(2$φ$) component of the current-phase relation of the Josephson current, or with an interaction between the Cooper-pairs, causing an admixture of quartets to the condensate. △ Less

Submitted 23 March, 2004; originally announced March 2004.

Comments: 15 pages, 4 Figures

Magnetic imaging of Pearl vortices

Authors: F. Tafuri, J. R. Kirtley, P. G. Medaglia, P. Orgiani, G. Balestrino

Abstract: We have used scanning SQUID magnetometry to image vortices in ultra-thin [Ba$_{0.9}$Nd$_{0.1}$CuO$_{2+x}$]$_m$/[CaCuO$_2$]$_n$ (CBCO) high temperature superconductor samples, with as few as three superconducting CuO$_2$ planes. The Pearl lengths ($Λ= 2λ_{L}^2/d$, $λ_{L}$ the London penetration depth, $d$ the superconducting film thickness) in these samples, as determined by fits to the vortex im… ▽ More We have used scanning SQUID magnetometry to image vortices in ultra-thin [Ba$_{0.9}$Nd$_{0.1}$CuO$_{2+x}$]$_m$/[CaCuO$_2$]$_n$ (CBCO) high temperature superconductor samples, with as few as three superconducting CuO$_2$ planes. The Pearl lengths ($Λ= 2λ_{L}^2/d$, $λ_{L}$ the London penetration depth, $d$ the superconducting film thickness) in these samples, as determined by fits to the vortex images, agree with those by local susceptibility measurements, and can be as long as 1mm. The in-plane penetration depths $λ_{ab}$ inferred from the Pearl lengths are longer than many bulk cuprates with comparable critical temperatures. We speculate on the causes of the long penetration depths, and on the possibility of exploiting the unique properties of these superconductors for basic experiments. △ Less

Submitted 27 February, 2004; originally announced February 2004.

Comments: 4 pages, 3 figures. to be published in Physical Review Letters

Robust dx2-y2 pairing symmetry in high-temperature superconductors

Authors: C. C. Tsuei, J. R. Kirtley, G. Hammerl, J. Mannhart, H. Raffy, Z. Z. Li

Abstract: Although initially quite controversial, it has been widely accepted that the Cooper pairs in optimally doped cuprate superconductors have predominantly dx2-y2 wavefunction symmetry. The controversy has now shifted to whether the high-Tc pairing symmetry changes away from optimal do**. Here we present phase-sensitive tricrystal experiments on three cuprate systems: Y0.7Ca0.3Ba2Cu3O7-x (Ca-doped… ▽ More Although initially quite controversial, it has been widely accepted that the Cooper pairs in optimally doped cuprate superconductors have predominantly dx2-y2 wavefunction symmetry. The controversy has now shifted to whether the high-Tc pairing symmetry changes away from optimal do**. Here we present phase-sensitive tricrystal experiments on three cuprate systems: Y0.7Ca0.3Ba2Cu3O7-x (Ca-doped Y-123), La2-xSrxCuO4 (La-214) and Bi2Sr2CaCu2O8+x (Bi-2212),with do** levels covering the underdoped, optimal and overdoped regions. Our work implies that time-reversal invariant, predominantly dx2-y2 pairing symmetry is robust over a large variation in do**, and underscores the important role of on-site Coulomb repulsion in the making of high-temperature superconductivity. △ Less

Submitted 26 February, 2004; originally announced February 2004.

Comments: 4 pages, 4 figures

Paramagnetic effect in YBaCuO grain boundary junctions

Authors: E. Il'ichev, F. Tafuri, M. Grajcar, R. P. J. IJsselsteijn, J. Weber, F. Lombardi, J. R. Kirtley

Abstract: A detailed investigation of the magnetic response of YBaCuO grain boundary Josephson junctions has been carried out using both radio-frequency measurements and Scanning SQUID Microscopy. In a nominally zero-field-cooled regime we observed a paramagnetic response at low external fields for 45 degree asymmetric grain boundaries. We argue that the observed phenomenology results from the d-wave orde… ▽ More A detailed investigation of the magnetic response of YBaCuO grain boundary Josephson junctions has been carried out using both radio-frequency measurements and Scanning SQUID Microscopy. In a nominally zero-field-cooled regime we observed a paramagnetic response at low external fields for 45 degree asymmetric grain boundaries. We argue that the observed phenomenology results from the d-wave order parameter symmetry and depends on Andreev bound states. △ Less

Submitted 29 June, 2003; originally announced June 2003.

Comments: To be published in Phys. Rev. B

Journal ref: Phys. Rev. B 68, 014510 (2003)