-
Resolving the Hydrophobicity of Me-4PACz Hole Transport Layer for High-Efficiency Inverted Perovskite Solar Cells
Authors:
Kashimul Hossain,
Ashish Kulkarni,
Urvashi Bothra,
Benjamin Klingebiel,
Thomas Kirchartz,
Michael Saliba,
Dinesh Kabra
Abstract:
[4-(3,6-dimethyl-9H-carbazole-9-yl)butyl]phosphonic acid (Me-4PACz) self-assembled monolayer (SAM) has been employed in perovskite single junction and tandem devices demonstrating high efficiencies. However, a uniform perovskite layer does not form due to the hydrophobicity of Me-4PACz. Here, we tackle this challenge by adding a conjugated polyelectrolyte poly(9,9-bis(3'-(N,N-dimethyl)-N-ethylammo…
▽ More
[4-(3,6-dimethyl-9H-carbazole-9-yl)butyl]phosphonic acid (Me-4PACz) self-assembled monolayer (SAM) has been employed in perovskite single junction and tandem devices demonstrating high efficiencies. However, a uniform perovskite layer does not form due to the hydrophobicity of Me-4PACz. Here, we tackle this challenge by adding a conjugated polyelectrolyte poly(9,9-bis(3'-(N,N-dimethyl)-N-ethylammonium-propyl-2,7-fluorene)-alt-2,7-(9,9dioctylfluorene)dibromide (PFN-Br) to the Me-4PACz in a specific ratio, defines as Pz:PFN. With this mixing engineering strategy of Pz:PFN, the PFN-Br interacts with the A-site cation and is confirmed via solution-state nuclear magnetic resonance studies. The narrow full width at half maximum (FWHM) of diffraction peaks of perovskite film revealed improved crystallization on the optimal mixing ratio of Pz:PFN. Interestingly, the mixing of PFN-Br additionally tunes the work function of the Me-4PACz as revealed by the Kelvin probe force microscopy and built-in-voltage estimation in solar cells. Devices employing optimized Pz:PFN mixing ratio deliver open-circuit voltage (Voc)of 1.16 V and efficiency >20% for perovskites with a bandgap of 1.6 eV with high reproducibility and concomitant stability. Considering significant research on Me-4PACz SAM, our work highlights the importance of obtaining a uniform perovskite layer with improved yield and performance.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
How Charge Carrier Exchange between Absorber and Contact influences Time Constants in the Frequency Domain Response of Perovskite Solar Cells
Authors:
Sandheep Ravishankar,
Zhifa Liu,
Yueming Wang,
Thomas Kirchartz,
Uwe Rau
Abstract:
A model is derived for the frequency- and time-domain opto-electronic response of perovskite solar cells (PSCs) that emphasizes the role of charge carrier exchange, .i.e. extraction and injection, from (to) the perovskite through the transport layer to (from) the collecting electrode. This process is described by a charge carrier exchange velocity that depends on the mobility and electric field in…
▽ More
A model is derived for the frequency- and time-domain opto-electronic response of perovskite solar cells (PSCs) that emphasizes the role of charge carrier exchange, .i.e. extraction and injection, from (to) the perovskite through the transport layer to (from) the collecting electrode. This process is described by a charge carrier exchange velocity that depends on the mobility and electric field inside the transport layer. The losses implied by this process are modelled in an equivalent circuit model in the form of a voltage-dependent transport layer resistance. The analysis of the model predicts that the voltage dependence of the measured time constants allows discriminating situations where the transport layer properties dominate the experimental response. Application of this method to experimental impedance spectroscopy data identifies charge extraction velocities between 1-100 cm/s at 1 sun open-circuit conditions for p-i-n PSCs with PTAA as the hole transport layer, that corresponds to transport layer mobilities between 10^-4 - 3 x 10^-3 cm^2V^-1s^-1. The model paves the way for accurate estimation of photocurrent and fill factor losses in PSCs caused by the low mobilities in the transport layers, using small perturbation measurements in the time and frequency domain.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
Characterizing the Influence of Charge Extraction Layers on the Performance of Triple-Cation Perovskite Solar Cells
Authors:
Johanna Siekmann,
Ashish Kulkarni,
Samah Akel,
Benjamin Klingebiel,
Michael Saliba,
Uwe Rau,
Thomas Kirchartz
Abstract:
Selecting suitable charge transport layers and suppressing non-radiative recombination at interfaces to the absorber layer are vital to maximize the efficiency of halide perovskite solar cells. In this work, high-quality perovskite thin films and devices are fabricated with different fullerene-based electron transport layers and different self-assembled monolayers as hole transport layers. We then…
▽ More
Selecting suitable charge transport layers and suppressing non-radiative recombination at interfaces to the absorber layer are vital to maximize the efficiency of halide perovskite solar cells. In this work, high-quality perovskite thin films and devices are fabricated with different fullerene-based electron transport layers and different self-assembled monolayers as hole transport layers. We then perform a comparative study of a significant variety of different electrical, optical and photoemission-based characterization techniques to quantify the properties of the solar cells, the individual layers and importantly the interfaces between them. In addition, we highlight the limitations and problems of the different measurements, the insights gained by combining different methods and the different strategies to extract information from the experimental raw data.
△ Less
Submitted 11 February, 2023;
originally announced February 2023.
-
A Universal Strategy of Perovskite Ink-Substrate Interaction to Overcome the Poor Wettability of a Self-Assembled Monolayer for Reproducible Perovskite Solar Cells
Authors:
Ashish Kulkarni,
Ran**i Sarkar,
Samah Akel,
Maria Haeser,
Benjamin Klingebiel,
Matthias Wuttig,
Sudip Chakraborty,
Michael Saliba,
Thomas Kirchartz
Abstract:
Perovskite solar cells employing self assembled monolayers such as Me-4PACz as hole transport layer has been reported to demonstrate high device efficiency. However, the poor perovskite wetting on the Me-4PACz caused by poor perovskite ink interaction with the underlying Me-4PACz presents significant challenges for fabricating efficient perovskite devices. A triple co-solvent system comprising of…
▽ More
Perovskite solar cells employing self assembled monolayers such as Me-4PACz as hole transport layer has been reported to demonstrate high device efficiency. However, the poor perovskite wetting on the Me-4PACz caused by poor perovskite ink interaction with the underlying Me-4PACz presents significant challenges for fabricating efficient perovskite devices. A triple co-solvent system comprising of dimethylformamide (DMF), dimethyl sulfoxide (DMSO) and N-methyl-2-pyrrolidone (NMP) is employed to improve the perovskite ink-substrate interaction and obtain a uniform perovskite layer. In comparison to DMF, DMSO-based inks, the inclusion of NMP shows considerably higher binding energies of the perovskite ink with Me-4PACz as revealed by density-functional theory calculations. With the optimized triple co-solvent ratio, the perovskite devices deliver high power conversion efficiencies of >20%, 19.5% and ~18.5% for active areas of 0.16 cm2, 0.72 cm2 and 1.08 cm2 respectively. Importantly, this perovskite ink-substrate interaction approach is universal and helps in obtaining a uniform layer and high photovoltaic device performance for other perovskite compositions such as MAPbI3, FAMAPbI3-xBrx, and MA-free FACsPbI3-xBrx.
△ Less
Submitted 10 February, 2023;
originally announced February 2023.
-
Quantifying Charge Extraction and Recombination Using the Rise and Decay of the Transient Photovoltage of Perovskite Solar Cells
Authors:
Lisa Krückemeier,
Zhifa Liu,
Thomas Kirchartz,
Uwe Rau
Abstract:
The extraction of photogenerated charge carriers and the generation of a photovoltage belong to the fundamental functionalities of any solar cell. These processes happen not instantaneously but rather come with finite time constants, e.g., a time constant related to the rise of the externally measured open circuit voltage following a short light pulse. The present paper provides a new method to an…
▽ More
The extraction of photogenerated charge carriers and the generation of a photovoltage belong to the fundamental functionalities of any solar cell. These processes happen not instantaneously but rather come with finite time constants, e.g., a time constant related to the rise of the externally measured open circuit voltage following a short light pulse. The present paper provides a new method to analyze transient photovoltage measurements at different bias light intensities combining rise and decay times of the photovoltage. The approach uses a linearized version of a system of two coupled differential equations that is solved analytically be determining the eigenvalues of a 2 x 2 matrix. By comparison between the eigenvalues and the measured rise and decay times during a transient photovoltage measurement, we determine the rates of carrier recombination and extraction as a function of bias voltage and establish a simple link between their ratio and the efficiency losses in the perovskite solar cell.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Comparing Methods of Characterizing Energetic Disorder in Organic Solar Cells
Authors:
Paula Hartnagel,
Sandheep Ravishankar,
Benjamin Klingebiel,
Oliver Thimm,
Thomas Kirchartz
Abstract:
Energetic disorder has been known for decades to limit the performance of structurally disordered semiconductors such as amorphous silicon and organic semiconductors. However, in the past years, high performance organic solar cells have emerged showing a continuously reduced amount of energetic disorder. While searching for future high efficiency material systems, it is therefore important to corr…
▽ More
Energetic disorder has been known for decades to limit the performance of structurally disordered semiconductors such as amorphous silicon and organic semiconductors. However, in the past years, high performance organic solar cells have emerged showing a continuously reduced amount of energetic disorder. While searching for future high efficiency material systems, it is therefore important to correctly characterize this energetic disorder. While there are several techniques in literature, the most common approaches to probe the density of defect states are using optical excitation as in external quantum efficiency measurements or sequential filling of the tail states by applying an external voltage as in admittance spectroscopy. A metanalysis of available literature as well as our experiments using four characterization techniques on two material systems reveal that electrical, voltage-dependent measurements frequently yield higher values of energetic disorder than optical measurements. With drift-diffusion simulations, we demonstrate that the approaches probe different energy ranges of the subband-gap density of states. We further explore the limitations of the techniques and find that extraction of information from a capacitance-voltage curve can be inhibited by an internal series resistance. Thereby, we explain the discrepancies between measurements techniques with sensitivity to different energy ranges and electronic parameters.
△ Less
Submitted 17 January, 2023;
originally announced January 2023.
-
Fill Factor Losses and Deviations from the Superposition Principle in Lead-Halide Perovskite Solar Cells
Authors:
David Grabowski,
Zhifa Liu,
Gunnar Schöpe,
Uwe Rau,
Thomas Kirchartz
Abstract:
The enhancement of the fill factor in the current generation of perovskite solar cells is the key for further efficiency improvement. Thus, methods to quantify the fill factor losses are urgently needed. A classical method to quantify Ohmic and non-Ohmic resistive losses in solar cells is based on the comparison between the voltage in the dark and under illumination analysed at equal recombination…
▽ More
The enhancement of the fill factor in the current generation of perovskite solar cells is the key for further efficiency improvement. Thus, methods to quantify the fill factor losses are urgently needed. A classical method to quantify Ohmic and non-Ohmic resistive losses in solar cells is based on the comparison between the voltage in the dark and under illumination analysed at equal recombination current density. Applied to perovskite solar cells, we observe a combination of an Ohmic series resistance with a voltage-dependent resistance that is most prominent at short circuit and low forward bias. The latter is most likely caused by the poor transport properties of the electron and/or hole transport layers. By measuring the photoluminescence of perovskite solar cells as a function of applied voltage, we provide direct evidence for a high quasi-Fermi level splitting at low and moderate forward bias that substantially exceeds the externally applied voltage. This quasi-Fermi level splitting causes recombination losses and, thus, reduces both the short-circuit current and the fill factor of the solar cell.
△ Less
Submitted 16 June, 2022;
originally announced July 2022.
-
Interpretation of Mott-Schottky Plots of Photoanodes for Water Splitting
Authors:
Sandheep Ravishankar,
Juan Bisquert,
Thomas Kirchartz
Abstract:
A large body of literature reports that both bismuth vanadate and haematite photoanodes are semiconductors with an extremely high do** density between 10^18-10^21 cm^-3. Such values are obtained from Mott-Schottky plots by assuming that the measured capacitance is dominated by the capacitance of the depletion layer formed by the do** density within the photoanode. In this work, we show that su…
▽ More
A large body of literature reports that both bismuth vanadate and haematite photoanodes are semiconductors with an extremely high do** density between 10^18-10^21 cm^-3. Such values are obtained from Mott-Schottky plots by assuming that the measured capacitance is dominated by the capacitance of the depletion layer formed by the do** density within the photoanode. In this work, we show that such an assumption is erroneous in many cases because the injection of electrons from the collecting contact creates a ubiquitous capacitance step that is very difficult to distinguish from that of the depletion layer. Based on this reasoning, we derive an analytical resolution limit that is independent of the assumed active area and surface roughness of the photoanode, below which do** densities cannot be measured in a capacitance measurement. We find that the reported do** densities in literature lie very close to this value and therefore conclude that there is no credible evidence from capacitance measurements that confirms that bismuth vanadate and haematite photoanodes contain high do** densities.
△ Less
Submitted 21 March, 2022; v1 submitted 11 January, 2022;
originally announced January 2022.
-
Effect of do**, photodo** and bandgap variation on the performance of perovskite solar cells
Authors:
Basita Das,
Irene Aguilera,
Uwe Rau,
Thomas Kirchartz
Abstract:
Most traditional semiconductor materials are based on the control of do** densities to create junctions and thereby functional and efficient electronic and optoelectronic devices. The technology development for halide perovskites had initially only rarely made use of the concept of electronic do** of the perovskite layer and instead employed a variety of different contact materials to create f…
▽ More
Most traditional semiconductor materials are based on the control of do** densities to create junctions and thereby functional and efficient electronic and optoelectronic devices. The technology development for halide perovskites had initially only rarely made use of the concept of electronic do** of the perovskite layer and instead employed a variety of different contact materials to create functionality. Only recently, intentional, or unintentional do** of the perovskite layer is more frequently invoked as an important factor explaining differences in photovoltaic or optoelectronic performance in certain devices. Here we use numerical simulations to study the influence of do** and photodo** on photoluminescence quantum yield as well as other device relevant metrics. We find that do** can improve the photoluminescence quantum yield by making radiative recombination faster. This effect can benefit or harm photovoltaic performance given that the improvement of photoluminescence quantum efficiency and open-circuit voltage is accompanied by a reduction of the diffusion length. This reduction will eventually lead to inefficient carrier collection at high do** densities. The photovoltaic performance might improve at an optimum do** density which depends on a range of factors such as the mobilities of the different layers and the ratio of the capture cross sections for electrons and holes.
△ Less
Submitted 6 December, 2021;
originally announced December 2021.
-
Multilayer Capacitances: How Selective Contacts Affect Capacitance Measurements of Perovskite Solar Cells
Authors:
Sandheep Ravishankar,
Zhifa Liu,
Uwe Rau,
Thomas Kirchartz
Abstract:
Capacitance measurements as a function of voltage, frequency and temperature are useful tools to identify fundamental parameters that affect solar cell operation. Techniques such as capacitance-voltage (CV), Mott-Schottky analysis and thermal admittance spectroscopy (TAS) measurements are therefore frequently employed to obtain relevant parameters of the perovskite absorber layer in perovskite sol…
▽ More
Capacitance measurements as a function of voltage, frequency and temperature are useful tools to identify fundamental parameters that affect solar cell operation. Techniques such as capacitance-voltage (CV), Mott-Schottky analysis and thermal admittance spectroscopy (TAS) measurements are therefore frequently employed to obtain relevant parameters of the perovskite absorber layer in perovskite solar cells. However, state-of-the-art perovskite solar cells employ thin electron and hole transport layers that improve contact selectivity. These selective contacts are often quite resistive in nature, which implies that their capacitances will contribute to the total capacitance and thereby affect the extraction of the capacitance of the perovskite layer. Based on this premise, we develop a simple multilayer model that considers the perovskite solar cell as a series connection of the geometric capacitance of each layer in parallel with their voltage-dependent resistances. Analysis of this model yields fundamental limits to the resolution of spatial do** profiles and minimum values of do**/trap densities, built-in voltages and activation energies. We observe that most of the experimental capacitance-voltage-frequency-temperature data, calculated do**/trap densities and activation energies reported in literature are within these cut-off values derived, indicating that the capacitance response of the perovskite solar cell is indeed strongly affected by the capacitance of its selective contacts.
△ Less
Submitted 21 December, 2021; v1 submitted 10 June, 2021;
originally announced June 2021.
-
Understanding Transient Photoluminescence in Halide Perovskite Layer Stacks and Solar Cells
Authors:
Lisa Krückemeier,
Benedikt Krogmeier,
Zhifa Liu,
Uwe Rau,
Thomas Kirchartz
Abstract:
While transient photoluminescence measurements are a very popular tool to monitor the charge-carrier dynamics in the field of halide perovskite photovoltaics, interpretation of data obtained on multilayer samples is highly challenging due to the superposition of various effects that modulate the charge-carrier concentration in the perovskite layer and thereby the measured PL. These effects include…
▽ More
While transient photoluminescence measurements are a very popular tool to monitor the charge-carrier dynamics in the field of halide perovskite photovoltaics, interpretation of data obtained on multilayer samples is highly challenging due to the superposition of various effects that modulate the charge-carrier concentration in the perovskite layer and thereby the measured PL. These effects include bulk and interfacial recombination, charge transfer to electron or hole transport layers and capacitive charging or discharging. Here, numerical simulations with Sentauraus TCAD, analytical solutions and experimental data with a dynamic range of ~7 orders of magnitude on a variety of different sample geometries from perovskite films on glass to full devices are combined to present an improved understanding of this method. A presentation of the decay time of the TPL decay that follows from taking the derivative of the photoluminescence at every time is proposed. Plotting this decay time as a function of the time-dependent quasi-Fermi level splitting enables distinguishing between the different contributions of radiative and non-radiative recombination as well as charge extraction and capacitive effects to the decay.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
Interface Optimization via Fullerene Blends Enables Open-Circuit Voltages of 1.35 V in CH3NH3Pb(I0.8Br0.2)3 Solar Cells
Authors:
Zhifa Liu,
Johanna Siekmann,
Benjamin Klingebiel,
Uwe Rau,
Thomas Kirchartz
Abstract:
Non-radiative recombination processes are the biggest hindrance to approaching the radiative limit of the open-circuit voltage for wide-band gap perovskite solar cells. In addition, to high bulk quality, good interfaces and good energy level alignment for majority carriers at charge transport layer-absorber interfaces are crucial to minimize non-radiative recombination pathways. By tuning the lowe…
▽ More
Non-radiative recombination processes are the biggest hindrance to approaching the radiative limit of the open-circuit voltage for wide-band gap perovskite solar cells. In addition, to high bulk quality, good interfaces and good energy level alignment for majority carriers at charge transport layer-absorber interfaces are crucial to minimize non-radiative recombination pathways. By tuning the lowest-unoccupied molecular-orbital of electron transport layers via the use of different fullerenes and fullerene blends, we demonstrate open-circuit voltages exceeding 1.35 V in CH3NH3Pb(I0.8Br0.2)3 device. Further optimization of mobility in binary fullerenes electron transport layer can boost the power conversion efficiency as high as 18.6%. We note in particular that the Voc-fill factor product is > 1.085 V, which is the highest value reported for halide perovskites with this band gap.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Defect tolerant device geometries
Authors:
Basita Das,
Zhifa Liu,
Irene Aguilera,
Uwe Rau,
Thomas Kirchartz
Abstract:
The term defect tolerance is widely used in literature to describe materials such as lead-halides which exhibit long non-radiative lifetimes of carriers despite possessing a large concentration of point defects. Studies on defect tolerance of materials mostly look at the properties of the host material and/or the chemical nature of defects that affect the capture coefficients of defects. However,…
▽ More
The term defect tolerance is widely used in literature to describe materials such as lead-halides which exhibit long non-radiative lifetimes of carriers despite possessing a large concentration of point defects. Studies on defect tolerance of materials mostly look at the properties of the host material and/or the chemical nature of defects that affect the capture coefficients of defects. However, the recombination activity of a defect is not only a function of its capture coefficients alone but are also dependent on the electrostatics and the design of the layer stack of a photovoltaic device. Here we study the influence of device geometry on defect tolerance by combining calculations of capture coefficients with device simulations. We derive generic device design principles which can inhibit recombination inside a photovoltaic device for a given set of capture coefficients based on the idea of slowing down the slower of the two processes (electron and hole capture) even further by modifying electron and hole injection into the absorber layer. We use the material parameters and typical p-i-n device geometry representing methylammonium lead halide perovskites solar cells to illustrate the application of our generic design principles to improve specific devices .
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Comment on "Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells"
Authors:
Sandheep Ravishankar,
Thomas Unold,
Thomas Kirchartz
Abstract:
Ni et al. report minimum bulk trap densities of 10^11 cm-3 and 1-4 orders change in interfacial trap densities derived from drive-level capacitance profiling of lead halide perovskites. From basic electrostatic arguments, we show that such bulk trap densities cannot be resolved for a p-i-n perovskite solar cell for the reported layer thicknesses, while the apparent interfacial charge densities are…
▽ More
Ni et al. report minimum bulk trap densities of 10^11 cm-3 and 1-4 orders change in interfacial trap densities derived from drive-level capacitance profiling of lead halide perovskites. From basic electrostatic arguments, we show that such bulk trap densities cannot be resolved for a p-i-n perovskite solar cell for the reported layer thicknesses, while the apparent interfacial charge densities are a consequence of the geometrical capacitance and of charge injection into the perovskite layer.
△ Less
Submitted 29 November, 2020; v1 submitted 6 August, 2020;
originally announced August 2020.
-
Pitfalls and prospects of optical spectroscopy to characterize perovskite-transport layer interfaces
Authors:
Eline M. Hutter,
Thomas Kirchartz,
Bruno Ehrler,
David Cahen,
Elizabeth von Hauff
Abstract:
Perovskite photovoltaics has witnessed an unprecedented increase in power conversion efficiency over the last decade. The choice of transport layers, through which photo-generated electrons and holes are transported to the electrodes, is a crucial factor for further improving both the device performance and stability. In this perspective, we critically examine the application of optical spectrosco…
▽ More
Perovskite photovoltaics has witnessed an unprecedented increase in power conversion efficiency over the last decade. The choice of transport layers, through which photo-generated electrons and holes are transported to the electrodes, is a crucial factor for further improving both the device performance and stability. In this perspective, we critically examine the application of optical spectroscopy to characterize the quality of the transport layer-perovskite interface. We highlight the power of complementary studies that use both continuous wave (cw) and time-resolved photoluminescence (PL) to understand non-radiative losses, and additional transient spectroscopies for characterizing the potential for loss-less carrier extraction at the solar cell interfaces. Based on this discussion, we make recommendations on how to extrapolate results from optical measurements to assess the quality of a transport layer, and its impact on solar cell efficiency.
△ Less
Submitted 22 December, 2019;
originally announced December 2019.
-
A highly integrated, stand-alone photoelectrochemical device for large-scale solar hydrogen production
Authors:
Minoh Lee,
Bugra Turan,
Jan-Philipp Becker,
Katharina Welter,
Benjamin Klingebiel,
Elmar Neumann,
Yoo Jung Sohn,
Tsvetelina Merdzhanova,
Thomas Kirchartz,
Friedhelm Finger,
Uwe Rau,
Stefan Haas
Abstract:
Although photoelectrochemical water splitting is likely to be an important and powerful tool to provide environmentally friendly hydrogen, most developments in this field have been conducted on a laboratory scale so far. In order for the technology to make a sizeable impact on the energy transition, scaled up devices made of inexpensive and earth abundant materials must be developed. In this work,…
▽ More
Although photoelectrochemical water splitting is likely to be an important and powerful tool to provide environmentally friendly hydrogen, most developments in this field have been conducted on a laboratory scale so far. In order for the technology to make a sizeable impact on the energy transition, scaled up devices made of inexpensive and earth abundant materials must be developed. In this work, we demonstrate a scalable (64 cm2 aperture area) artificial photoelectrochemical device composed of triple-junction thin-film silicon solar cells in conjunction with an electrodeposited bifunctional nickel iron molybdenum water splitting catalyst. Our device shows a solar to hydrogen efficiency of up to 4.67% (5.33% active area) without bias assistance and wire connection. Furthermore, gas separation was enabled by incorporating a membrane in a 3D printed device frame.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Pathways towards 30% efficient single-junction perovskite solar cells and the role of mobile ions
Authors:
Jonas Diekmann,
Pietro Caprioglio,
Moritz H. Futscher,
Vincent M. Le Corre,
Sebastian Reichert,
Frank Jaiser,
Malavika Arvind,
Lorena Perdigon Toro,
Emilio Gutierrez-Partida,
Francisco Pena-Camargo,
Carsten Deibel,
Bruno Ehrler,
Thomas Unold,
Thomas Kirchartz,
Dieter Neher,
Martin Stolterfoht
Abstract:
Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline silicon cells are not well understood. Here, we establish a simulation model that well describes efficient p-i-n type perovskite solar cells and a range of different…
▽ More
Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline silicon cells are not well understood. Here, we establish a simulation model that well describes efficient p-i-n type perovskite solar cells and a range of different experiments. We then study important device and material parameters and we find that an efficiency regime of 30% can be unlocked by optimizing the built-in potential across the perovskite layer by using either highly doped (10^19 cm-3), thick transport layers (TLs) or ultrathin undoped TLs, e.g. self-assembled monolayers. Importantly, we only consider parameters that have been already demonstrated in recent literature, that is a bulk lifetime of 10 us, interfacial recombination velocities of 10 cm/s, a perovskite bandgap of 1.5 eV and an EQE of 95%. A maximum efficiency of 31% is predicted for a bandgap of 1.4 eV. Finally, we demonstrate that the relatively high mobile ion density does not represent a significant barrier to reach this efficiency regime. Thus, the results of this paper promise continuous PCE improvements until perovskites may become the most efficient single-junction solar cell technology in the near future.
△ Less
Submitted 25 April, 2021; v1 submitted 16 October, 2019;
originally announced October 2019.
-
Requirements for functional pn-homojunctions in lead-halide perovskite solar cells
Authors:
Thomas Kirchartz,
David Cahen
Abstract:
Cui et al. describe the fabrication and characterization of planar pn-junction solar cells based on lead-halide perovskites. The do** densities measured using Hall effect measurements vary from $N_D = 10^{12} cm^{-3}$ to $8\times 10^{12} cm^{-3}$ for the solution-processed n-type layer and $N_A = 8\times 10^9 cm^{-3}$ for the evaporated p-type layer. While these devices outperform their counterp…
▽ More
Cui et al. describe the fabrication and characterization of planar pn-junction solar cells based on lead-halide perovskites. The do** densities measured using Hall effect measurements vary from $N_D = 10^{12} cm^{-3}$ to $8\times 10^{12} cm^{-3}$ for the solution-processed n-type layer and $N_A = 8\times 10^9 cm^{-3}$ for the evaporated p-type layer. While these devices outperform their counterparts, that are supposedly un-doped, the results raise three important questions: (i) Are the reported do** densities high enough to change the electrostatic potential distribution in the device from that for the un-doped ones, (ii) are the do** densities high enough for the pn-junction to remain intact under typical photovoltaic operation conditions and (iii) is a pn-junction beneficial for photovoltaic performance given the typical properties of lead-halide perovskites.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Type and Degree of Covalence: Empirical Derivation and Implications
Authors:
Yevgeny Rakita,
Thomas Kirchartz,
Gary Hodes,
David Cahen
Abstract:
The way atoms attach to each other defines the function(s), e.g., mechanical, optical, electronic, of a given material. The nature of the chemical bond is, therefore, one of the most fundamental issues in materials. Both ionic interactions, i.e., resulting from electrical charges associated with the atoms, and covalent ones, i.e., the sharing of electrons between nuclei of different atoms, are usu…
▽ More
The way atoms attach to each other defines the function(s), e.g., mechanical, optical, electronic, of a given material. The nature of the chemical bond is, therefore, one of the most fundamental issues in materials. Both ionic interactions, i.e., resulting from electrical charges associated with the atoms, and covalent ones, i.e., the sharing of electrons between nuclei of different atoms, are usually viewed as forces that attract between atoms to form a rigid structure. Although less common for solid materials, it was shown theoretically to be possible for covalent interactions at the chemically-active electronic shell (or valence-band maximum) of semiconductors to reverse their more common nature and become repulsive, i.e., act against bonding. Some semiconductors with such predicted anti-bonding valence-band maximum levels (such as halide perovskites) show experimentally some amazing (opto-) electronic properties. Predictions that anti-bonding character can allow tolerance for existing defects, at least in part, can explain the superior properties of such semiconductors. Although there are known experimental ways to estimate the degree of the covalent nature (e.g., electronegativity), this was not possible hitherto for the type, i.e., distinguishing whether a material exhibits bonding or anti-bonding covalent interactions. We have developed a simple way to reveal the complete nature (both type and degree) of chemical bonds, using experimental data. After confirming our development with classical models and theoretical predictions, with a set of ~40 different functional semi-conductors, we show how knowledge of the complete nature of covalent bonding is of critical importance for fundamental properties of semiconductors.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
High Open-Circuit Voltages in Lead-Halide Perovskite Solar Cells - Experiment, Theory and Open Questions
Authors:
Thomas Kirchartz
Abstract:
One of the most significant features of lead-halide perovskites are their ability to have comparably slow recombination despite the fact that these materials are mostly processed from solution at room temperature. The slow recombination allows achieving high open-circuit voltages when the lead-halide perovskite layers are used in solar cells. This perspective discusses the state of the art of our…
▽ More
One of the most significant features of lead-halide perovskites are their ability to have comparably slow recombination despite the fact that these materials are mostly processed from solution at room temperature. The slow recombination allows achieving high open-circuit voltages when the lead-halide perovskite layers are used in solar cells. This perspective discusses the state of the art of our understanding and of experimental data with regard to recombination and open-circuit voltages in lead-halide perovskites. A special focus is put onto open questions that the community has to tackle to design future photovoltaic and optoelectronic devices based on lead-halide perovskites and other semiconductors with similar properties.
△ Less
Submitted 27 March, 2019;
originally announced April 2019.
-
Solar Energy Conversion and the Shockley-Queisser Model, a Guide for the Perplexed
Authors:
Jean-Francois Guillemoles,
Thomas Kirchartz,
David Cahen,
Uwe Rau
Abstract:
The Shockley-Queisser model is a landmark in photovoltaic device analysis by defining an ideal situation as reference for actual solar cells. However, the model and its implications are easily misunderstood. Thus, we present a guide to help understand and avoid misinterpreting it. Focusing on the five assumptions, underlying the model, we define figures of merit to quantify how close real solar ce…
▽ More
The Shockley-Queisser model is a landmark in photovoltaic device analysis by defining an ideal situation as reference for actual solar cells. However, the model and its implications are easily misunderstood. Thus, we present a guide to help understand and avoid misinterpreting it. Focusing on the five assumptions, underlying the model, we define figures of merit to quantify how close real solar cells approach each of these assumptions.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
The perovskite/transport layer interfaces dominate non-radiative recombination in efficient perovskite solar cells
Authors:
Martin Stolterfoht,
Pietro Caprioglio,
Christian M. Wolff,
José A. Márquez,
Joleik Nordmann,
Shanshan Zhang,
Daniel Rothhardt,
Ulrich Hörmann,
Alex Redinger,
Lukas Kegelmann,
Steve Albrecht,
Thomas Kirchartz,
Michael Saliba,
Thomas Unold,
Dieter Neher
Abstract:
Charge transport layers (CTLs) are key components of diffusion controlled perovskite solar cells, however, they can induce additional non-radiative recombination pathways which limit the open circuit voltage (V_OC) of the cell. In order to realize the full thermodynamic potential of the perovskite absorber, both the electron and hole transport layer (ETL/HTL) need to be as selective as possible. B…
▽ More
Charge transport layers (CTLs) are key components of diffusion controlled perovskite solar cells, however, they can induce additional non-radiative recombination pathways which limit the open circuit voltage (V_OC) of the cell. In order to realize the full thermodynamic potential of the perovskite absorber, both the electron and hole transport layer (ETL/HTL) need to be as selective as possible. By measuring the quasi-Fermi level splitting (QFLS) of perovskite/CTL heterojunctions, we quantify the non-radiative interfacial recombination current for a wide range of commonly used CTLs, including various hole-transporting polymers, spiro-OMeTAD, metal oxides and fullerenes. We find that all studied CTLs limit the V_OC by inducing an additional non-radiative recombination current that is significantly larger than the loss in the neat perovskite and that the least-selective interface sets the upper limit for the V_OC of the device. The results also show that the V_OC equals the internal QFLS in the absorber layer of (pin, nip) cells with selective CTLs and power conversion efficiencies of up to 21.4%. However, in case of less selective CTLs, the V_OC is substantially lower than the QFLS which indicates additional losses at the contacts and/or interfaces. The findings are corroborated by rigorous device simulations which outline several important considerations to maximize the V_OC. This work shows that the real challenge to supress non-radiative recombination losses in perovskite cells on their way to the radiative limit lies in the suppression of carrier recombination at the perovskite/CTL interfaces.
△ Less
Submitted 22 October, 2018; v1 submitted 2 October, 2018;
originally announced October 2018.
-
Impact of Small Phonon Energies on the Charge-Carrier Lifetimes in Metal-Halide Perovskites
Authors:
Thomas Kirchartz,
Tom Markvart,
Uwe Rau,
David A. Egger
Abstract:
Solar cells based on metal-halide perovskite absorber layers have resulted in outstanding photovoltaic devices with long non-radiative lifetimes as a crucial feature enabling high efficiencies. Long non-radiative lifetimes occur if the transfer of the energy of the electron-hole pair into vibrational energy is slow, due to, e.g., a low density of defects, weak electron phonon coupling or the relea…
▽ More
Solar cells based on metal-halide perovskite absorber layers have resulted in outstanding photovoltaic devices with long non-radiative lifetimes as a crucial feature enabling high efficiencies. Long non-radiative lifetimes occur if the transfer of the energy of the electron-hole pair into vibrational energy is slow, due to, e.g., a low density of defects, weak electron phonon coupling or the release of a large number of phonons needed for a single transition. Here, we discuss the implications of the known material properties of metal-halide perovskites (such as permittivities, phonon energies and effective masses) and combine those with basic models for electron-phonon coupling and multiphonon-transition rates in polar semiconductors. We find that the low phonon energies of MAPbI$_3$ lead to a strong dependence of recombination rates on trap position, which can be readily deduced from the underlying physical effects determining non-radiative transitions. Here, we show that this is important for the non-radiative recombination dynamics of metal-halide perovskites, as it implies that these systems are rather insensitive to defects that are not at midgap energy. This can lead to long lifetimes, which indicates that the low phonon energies are likely an important factor for the high performance of optoelectronic devices with metal halide perovskites.
△ Less
Submitted 26 January, 2018; v1 submitted 7 January, 2018;
originally announced January 2018.
