Showing 1–16 of 16 results for author: Kirby, R E

Summary of SLAC'S SEY Measurement On Flat Accelerator Wall Materials

Authors: F. Le Pimpec, R. E. Kirby, F. K. King, M. Pivi

Abstract: The electron cloud effect (ECE) causes beam instabilities in accelerator structures with intense positively charged bunched beams. Reduction of the secondary electron yield (SEY) of the beam pipe inner wall is effective in controlling cloud formation. We summarize SEY results obtained from flat TiN, TiZrV and Al surfaces carried out in a laboratory environment. SEY was measured after thermal con… ▽ More The electron cloud effect (ECE) causes beam instabilities in accelerator structures with intense positively charged bunched beams. Reduction of the secondary electron yield (SEY) of the beam pipe inner wall is effective in controlling cloud formation. We summarize SEY results obtained from flat TiN, TiZrV and Al surfaces carried out in a laboratory environment. SEY was measured after thermal conditioning, as well as after low energy, less than 300 eV, particle exposure. △ Less

Submitted 9 November, 2007; originally announced November 2007.

Comments: Presented at International Workshop on Electron-Cloud Effects (ECLOUD07), Daegu, Korea 5 figures, 4 pages

Report number: SLAC-PUB-12541

The Effect of Gas Ion Bombardment on the Secondary Electron Yield of TiN, TiCN and TiZrV Coatings For Suppressing Collective Electron Effects in Storage Rings

Authors: F. Le Pimpec, R. E. Kirby, F. K. King, M. Pivi

Abstract: In many accelerator storage rings running positively charged beams, ionization of residual gas and secondary electron emission (SEE) in the beam pipe will give rise to an electron cloud which can cause beam blow-up or loss of the circulating beam. A preventative measure that suppresses electron cloud formation is to ensure that the vacuum wall has a low secondary emission yield (SEY). The SEY of… ▽ More In many accelerator storage rings running positively charged beams, ionization of residual gas and secondary electron emission (SEE) in the beam pipe will give rise to an electron cloud which can cause beam blow-up or loss of the circulating beam. A preventative measure that suppresses electron cloud formation is to ensure that the vacuum wall has a low secondary emission yield (SEY). The SEY of thin films of TiN, sputter deposited Non-Evaporable Getters and a novel TiCN alloy were measured under a variety of conditions, including the effect of re-contamination from residual gas. △ Less

Submitted 22 March, 2006; v1 submitted 26 January, 2006; originally announced January 2006.

Comments: 15 pages - 7 figures - 8 tables, submitted to NIM A

Report number: SLAC - PUB - 11621

Journal ref: Nucl.Instrum.Meth. A564 (2006) 44-50

Polarized Electrons for Linear Colliders

Authors: J. E. Clendenin, A. Brachmann, E. L. Garwin, R. E. Kirby, D. -A. Luh, T. Maruyama, C. Y. Prescott, J. C. Sheppard, J. Turner, R. Prepost

Abstract: Future electron-positron linear colliders require a highly polarized electron beam with a pulse structure that depends primarily on whether the acceleration utilizes warm or superconducting rf structures. The International Linear Collider (ILC) will use cold structures for the main linac. It is shown that a dc-biased polarized photoelectron source such as successfully used for the SLC can meet t… ▽ More Future electron-positron linear colliders require a highly polarized electron beam with a pulse structure that depends primarily on whether the acceleration utilizes warm or superconducting rf structures. The International Linear Collider (ILC) will use cold structures for the main linac. It is shown that a dc-biased polarized photoelectron source such as successfully used for the SLC can meet the charge requirements for the ILC micropulse with a polarization approaching 90%. △ Less

Submitted 17 December, 2004; originally announced December 2004.

Comments: 4 pages, 2 tables, contributed to SPIN04 Symposium (Trieste)

Report number: SLAC-PUB-10867

Electron Conditioning of Technical Aluminium Surfaces: Effect on the Secondary Electron Yield

Authors: F. Le Pimpec, F. King, R. E. Kirby

Abstract: The effect of electron conditioning on commercially aluminium alloys 1100 and 6063 were investigated. Contrary to the assumption that electron conditioning, if performed long enough, can reduce and stabilize the SEY to low values ($\leq 1.3$, value of many pure elements), the SEY of aluminium did not go lower than 1.8. In fact, it reincreases with continued electron exposure dose. The effect of electron conditioning on commercially aluminium alloys 1100 and 6063 were investigated. Contrary to the assumption that electron conditioning, if performed long enough, can reduce and stabilize the SEY to low values ($\leq 1.3$, value of many pure elements), the SEY of aluminium did not go lower than 1.8. In fact, it reincreases with continued electron exposure dose. △ Less

Submitted 16 December, 2004; originally announced December 2004.

Comments: 36 pages, 25 figures, submitted to JVST A

Report number: SLAC-PUB-10894

Journal ref: J.Vac.Sci.Tech. A23 (2005) 1610

A systematic study of polarized electron emission from strained GaAs/GaAsP superlattice photocathodes

Authors: T. Maruyama, D. -A. Luh, A. Brachmann, J. E. Clendenin, E. L. Garwin, S. Harvey, J. Jiang, R. E. Kirby, C. Y. Prescott, R. Prepost, A. M. Moy

Abstract: Spin-polarized electron photoemission has been studied for GaAs/GaAs$_{1-x}$P$_x$ strained superlattice cathodes grown by gas-source molecular beam epitaxy. The superlattice structural parameters are systematically varied to optimize the photoemission characteristics. The heavy-hole and light-hole transitions are reproducibly observed in quantum efficiency spectra, enabling direct measurement of… ▽ More Spin-polarized electron photoemission has been studied for GaAs/GaAs$_{1-x}$P$_x$ strained superlattice cathodes grown by gas-source molecular beam epitaxy. The superlattice structural parameters are systematically varied to optimize the photoemission characteristics. The heavy-hole and light-hole transitions are reproducibly observed in quantum efficiency spectra, enabling direct measurement of the band energies and the energy splitting. Electron-spin polarization as high as 86% with over 1% quantum efficiency has been observed. △ Less

Submitted 16 December, 2004; originally announced December 2004.

Atomic Hydrogen Cleaning of Polarized GaAs Photocathodes

Authors: T. Maruyama, D. -A. Luh, A. Brachmann, J. E. Clendenin, E. L. Garwin, S. Harvey, R. E. Kirby, C. Y. Prescott, R. Prepost

Abstract: Atomic hydrogen cleaning followed by heat cleaning at 450$^\circ$C was used to prepare negative-electron-affinity GaAs photocathodes. When hydrogen ions were eliminated, quantum efficiencies of 15% were obtained for bulk GaAs cathodes, higher than the results obtained using conventional 600$^\circ$C heat cleaning. The low-temperature cleaning technique was successfully applied to thin, strained… ▽ More Atomic hydrogen cleaning followed by heat cleaning at 450$^\circ$C was used to prepare negative-electron-affinity GaAs photocathodes. When hydrogen ions were eliminated, quantum efficiencies of 15% were obtained for bulk GaAs cathodes, higher than the results obtained using conventional 600$^\circ$C heat cleaning. The low-temperature cleaning technique was successfully applied to thin, strained GaAs cathodes used for producing highly polarized electrons. No depolarization was observed even when the optimum cleaning time of about 30 seconds was extended by a factor of 100. △ Less

Submitted 16 December, 2004; originally announced December 2004.

Secondary electron yield measurements from thin surface coatings for NLC electron cloud reduction

Authors: F. Le Pimpec, F. King, R. E. Kirby, M. Pivi

Abstract: In the beam pipe of the positron dam** ring of the Next Linear Collider, electrons will be created by beam interaction with the surrounding vacuum chamber wall and give rise to an electron cloud. Several solutions are possible for avoiding the electron cloud, without changing the bunch structure or the diameter of the vacuum chamber. Some of the currently available solutions for preventing thi… ▽ More In the beam pipe of the positron dam** ring of the Next Linear Collider, electrons will be created by beam interaction with the surrounding vacuum chamber wall and give rise to an electron cloud. Several solutions are possible for avoiding the electron cloud, without changing the bunch structure or the diameter of the vacuum chamber. Some of the currently available solutions for preventing this spurious electron load include reducing residual gas ionization by the beam, minimizing beam photon-induced electron production, and lowering the secondary electron yield (SEY) of the chamber wall. We will report on recent SEY measurements performed at SLAC on TiN coatings and TiZrV non-evaporable getter thin films. △ Less

Submitted 19 May, 2004; originally announced May 2004.

Comments: 3 Pages, 6 figure, Presented at EPAC 2004, Lucerne (CH)

Report number: SLAC-PUB-10438

Recent Progress at SLAC Extracting High Charge from Highly-Polarized Photocathodes for Future-Collider Applications

Authors: J. E. Clendenin, A. Brachmann, E. L. Garwin, S. Harvey, J. Jiang, R. E. Kirby, D. -A. Luh, T. Maruyama, R. Prepost, C. Y. Prescott, J. L. Turner

Abstract: Future colliders such as NLC and JLC will require a highly-polarized macropulse with charge that is more than an order of magnitude beyond that which could be produced for the SLC. The maximum charge from the SLC uniformly-doped GaAs photocathode was limited by the surface charge limit (SCL). The SCL effect can be overcome by using an extremely high (>1019 cm-3) surface dopant concentration. Whe… ▽ More Future colliders such as NLC and JLC will require a highly-polarized macropulse with charge that is more than an order of magnitude beyond that which could be produced for the SLC. The maximum charge from the SLC uniformly-doped GaAs photocathode was limited by the surface charge limit (SCL). The SCL effect can be overcome by using an extremely high (>1019 cm-3) surface dopant concentration. When combined with a medium dopant concentration in the majority of the active layer (to avoid depolarization), the surface concentration has been found to degrade during normal heat cleaning (1 hour at 600 C). The Be dopant as typically used in an MBE-grown superlattice cathode is especially susceptible to this effect compared to Zn or C dopant. Some relief can be found by lowering the cleaning temperature, but the long-term general solution appears to be atomic hydrogen cleaning. △ Less

Submitted 21 January, 2004; originally announced January 2004.

Comments: 11 pages, 3 figures, 1 table, contributed to 10th Workshop on Polarized Sources and Targets, Novosibirsk, Sept. 22-26, 2003, to be submitted to Nucl. Instrum. and Meth. A

Report number: SLAC-PUB-10304

Journal ref: Nucl.Instrum.Meth. A536 (2005) 308-311

Secondary Electron Yield Measurements of TiN Coating and TiZrV Getter Film

Authors: F. Le Pimpec, F. King, R. E. Kirby, M. Pivi

Abstract: In the beam pipe of the positron Main Dam** Ring (MDR) of the Next Linear Collider (NLC), ionization of residual gases and secondary electron emission give rise to an electron cloud which can cause the loss of the circulating beam. One path to avoid the electron cloud is to ensure that the vacuum wall has low secondary emission yield and, therefore, we need to know the secondary emission yield… ▽ More In the beam pipe of the positron Main Dam** Ring (MDR) of the Next Linear Collider (NLC), ionization of residual gases and secondary electron emission give rise to an electron cloud which can cause the loss of the circulating beam. One path to avoid the electron cloud is to ensure that the vacuum wall has low secondary emission yield and, therefore, we need to know the secondary emission yield (SEY) for candidate wall coatings. We report on SEY measurements at SLAC on titanium nitride (TiN) and titanium-zirconium-vanadium (TiZrV) thin sputter-deposited films, as well as describe our experimental setup. △ Less

Submitted 30 August, 2004; v1 submitted 15 October, 2003; originally announced October 2003.

Comments: 14 pages, 16 figures

Report number: SLAC-TN-03-052 LCC-0128

Surface Analysis of OFE-Copper X-Band Accelerating Structures and Possible Correlation to RF Breakdown Events

Authors: S. E. Harvey, F. Le Pimpec, R. E. Kirby, F. Marcelja, K. Adamson, E. L. Garwin

Abstract: X-band accelerator structures meeting the Next Linear Collider (NLC) design requirements have been found to suffer vacuum surface damage caused by radio frequency (RF) breakdown, when processed to high electric-field gradients. Improved understanding of these breakdown events is desirable for the development of structure designs, fabrication procedures, and processing techniques that minimize st… ▽ More X-band accelerator structures meeting the Next Linear Collider (NLC) design requirements have been found to suffer vacuum surface damage caused by radio frequency (RF) breakdown, when processed to high electric-field gradients. Improved understanding of these breakdown events is desirable for the development of structure designs, fabrication procedures, and processing techniques that minimize structure damage. RF reflected wave analysis and acoustic sensor pickup have provided breakdowns localization in RF structures. Particle contaminations found following clean autopsy of four RF-processed travelling wave structures, have been catalogued and analyzed. Their influence on RF breakdown, as well as that of several other material-based properties, will be discussed. △ Less

Submitted 13 October, 2003; originally announced October 2003.

Comments: 21 pages, 8 figures, 4 tables, Submitted to JVST A as a proceeding of the 50th AVS conference (Baltimore, MD, 2-7 Nov 2003)

Report number: SLAC-PUB-10197

Journal ref: J.Vac.Sci.Technol.A Vac.Surf.Films 22 (2004) 1326

Autopsy on an RF-Processed X-band Travelling Wave Structure

Authors: F. Le Pimpec, S. Harvey, R. E. Kirby, F. Marcelja

Abstract: In an effort to locate the cause(s) of high electric-field breakdown in x-band accelerating structures, we have cleanly-autopsied (no debris added by post-operation structure disassembly) an RF-processed structure. Macroscopic localization provided operationally by RF reflected wave analysis and acoustic sensor pickup was used to connect breakdowns to autopsied crater damage areas. Surprisingly,… ▽ More In an effort to locate the cause(s) of high electric-field breakdown in x-band accelerating structures, we have cleanly-autopsied (no debris added by post-operation structure disassembly) an RF-processed structure. Macroscopic localization provided operationally by RF reflected wave analysis and acoustic sensor pickup was used to connect breakdowns to autopsied crater damage areas. Surprisingly, the microscopic analyses showed breakdown craters in areas of low electric field. High currents induced by the magnetic field on sharp corners of the input coupler appears responsible for the extreme breakdown damage observed. △ Less

Submitted 3 October, 2002; originally announced October 2002.

Comments: 9 Figures, 3 pages presented at LINAC 2002 Gyeongju Korea

Report number: SLAC-PUB-9526

A Polarized Electron RF Photoinjector Using the Plane-Wave-Transformer (PWT) Design

Authors: J. E. Clendenin, R. E. Kirby, D. Yu, D. Newsham

Abstract: Polarized electron beams are now in routine use in particle accelerators for nuclear and high energy physics experiments. These beams are presently produced by dc-biased photoelectron sources combined with rf chop** and bunching systems with inherently high transverse emittances. Low emittances can be produced with an rf gun, but the vacuum environment has until now been considered too harsh t… ▽ More Polarized electron beams are now in routine use in particle accelerators for nuclear and high energy physics experiments. These beams are presently produced by dc-biased photoelectron sources combined with rf chop** and bunching systems with inherently high transverse emittances. Low emittances can be produced with an rf gun, but the vacuum environment has until now been considered too harsh to support a negative electron affinity GaAs photocathode. We propose to significantly improve the vacuum conditions by adapting a PWT rf photoinjector to achieve reasonable cathode emission rates and lifetimes. This adaptation can also be combined with special optics that will result in a flat beam with a normalized rms emittance in the narrow dimension that may be as low as 10-8 m. △ Less

Submitted 3 May, 2002; originally announced May 2002.

Comments: 14 pages, 5 figures, to be submitted to PRST-AB

Report number: SLAC-PUB-8971

Observation of Plasma Focusing of a 28.5 GeV Positron Beam

Authors: J. S. T. Ng, P. Chen, H. Baldis, P. Bolton, D. Cline, W. Craddock, C. Crawford, F. J. Decker, C. Field, Y. Fukui, V. Kumar, R. Iverson, F. King, R. E. Kirby, K. Nakajima, R. Noble, A. Ogata, P. Raimondi, D. Walz, A. W. Weidemann

Abstract: The observation of plasma focusing of a 28.5 GeV positron beam is reported. The plasma was formed by ionizing a nitrogen jet only 3 mm thick. Simultaneous focusing in both transverse dimensions was observed with effective focusing strengths of order Tesla per micron. The minimum area of the beam spot was reduced by a factor of 2.0 +/- 0.3 by the plasma. The longitudinal beam envelope was measure… ▽ More The observation of plasma focusing of a 28.5 GeV positron beam is reported. The plasma was formed by ionizing a nitrogen jet only 3 mm thick. Simultaneous focusing in both transverse dimensions was observed with effective focusing strengths of order Tesla per micron. The minimum area of the beam spot was reduced by a factor of 2.0 +/- 0.3 by the plasma. The longitudinal beam envelope was measured and compared with numerical calculations. △ Less

Submitted 4 October, 2001; originally announced October 2001.

Report number: SLAC-PUB-8975

Journal ref: Phys.Rev.Lett. 87 (2001) 244801

Photoinjector design for the LCLS

Authors: P. R. Bolton, J. E. Clendenin, D. H. Dowell, M. Ferrario, A. S. Fisher, S. M. Gierman, R. E. Kirby, P. Krejcik, C. G. Limborg, G. A. Mulhollan, D. Nguyen, D. T. Palmer, J. B. Rosenzweig, J. F. Schmerge, L. Serafini, X. -J. Wang

Abstract: The design of the Linac Coherent Light Source assumes that a low-emittance, 1-nC, 10-ps beam will be available for injection into the 15-GeV linac. The proposed rf photocathode injector that will provide a 150-MeV beam with rms normalized emittances of 1 mm in both the transverse and longitudinal dimensions is based on a 1.6-cell S-band rf gun that is equipped with an emittance compensating sole… ▽ More The design of the Linac Coherent Light Source assumes that a low-emittance, 1-nC, 10-ps beam will be available for injection into the 15-GeV linac. The proposed rf photocathode injector that will provide a 150-MeV beam with rms normalized emittances of 1 mm in both the transverse and longitudinal dimensions is based on a 1.6-cell S-band rf gun that is equipped with an emittance compensating solenoid. The booster accelerator is positioned at the beam waist coinciding with the first emittance maximum and is provided with an accelerating gradient of ~25 MeV/m, i.e., the "new working point." The uv pulses required for cathode excitation will be generated by tripling the output of a Ti:sapphire laser system consisting of a highly stable cw mode-locked oscillator and two bow-tie amplifiers pumped by a pair of Q-switched Nd:YAG lasers. The large bandwidth of the Ti:sapphire system accommodates the desired temporal pulse sha**. Details of the design and the supporting simulations are presented. △ Less

Submitted 5 November, 2001; v1 submitted 24 August, 2001; originally announced August 2001.

Comments: 13 pages (double spaced), 4 figures, contributed to The 23rd International Free Electron Laser Conference, Darmstadt, Germany, 20-24 August 2001

Report number: SLAC-PUB-8962

Journal ref: Nucl.Instrum.Meth. A483 (2002) 296-300

Photovoltage Effects in Photoemission from Thin GaAs Layers

Authors: G. A. Mulhollan, A. V. Subashiev, J. E. Clendenin, E. L. Garwin, R. E. Kirby, T. Maruyama, R. Prepost

Abstract: A set of thin GaAs p-type negative electron affinity (NEA) photocathodes have been used to measure the yield of photoemitted electrons at high intensity excitation. The active layer thickness is 100 nm and the p-type do** ranges from 5\times10^{18} cm^{-3} to 5\times10^{19} cm^{-3} for a set of four samples. The results show that the surface escape probability is a linear function of the NEA e… ▽ More A set of thin GaAs p-type negative electron affinity (NEA) photocathodes have been used to measure the yield of photoemitted electrons at high intensity excitation. The active layer thickness is 100 nm and the p-type do** ranges from 5\times10^{18} cm^{-3} to 5\times10^{19} cm^{-3} for a set of four samples. The results show that the surface escape probability is a linear function of the NEA energy. The surface photovoltage effect on photoemission is found to diminish to zero at a do** level of 5\times10^{19} cm^{-3}. The experimental results are shown to be in good agreement with calculations using a charge limit model based on surface photovoltage kinetics that assume a constant electron energy relaxation rate in the band bending region. △ Less

Submitted 23 March, 2001; originally announced March 2001.

Comments: LaTeX RevTeX 11 pages, 6 figures

Report number: SLAC-PUB-8753

Journal ref: Phys.Lett. A282 (2001) 309-318

Results on Plasma Focusing of High Energy Density Electron and Positron Beams

Authors: J. S. T. Ng, P. Chen, W. Craddock, F. J. Decker, R. C. Field, M. J. Hogan, R. Iverson, F. King, R. E. Kirby, T. Kotseroglou, P. Raimondi, D. Walz, H. A. Baldis, P. Bolton, D. Cline, Y. Fukui, V. Kumar, C. Crawford, R. Noble, K. Nakajima, A. Ogata, A. W. Weidemann

Abstract: We present results from the SLAC E-150 experiment on plasma focusing of high energy density electron and, for the first time, positron beams. We also discuss measurements on plasma lens-induced synchrotron radiation, longitudinal dynamics of plasma focusing, and laser- and beam-plasma interactions. We present results from the SLAC E-150 experiment on plasma focusing of high energy density electron and, for the first time, positron beams. We also discuss measurements on plasma lens-induced synchrotron radiation, longitudinal dynamics of plasma focusing, and laser- and beam-plasma interactions. △ Less

Submitted 18 August, 2000; originally announced August 2000.

Comments: LINAC 2000 paper No. THC13, Monterey, CA. Aug.21-25,2000, 3 pages, 2 figures

Report number: SLAC-PUB-8567

Journal ref: eConf C000821 (2000) THc13