-
Assessing the Value of Coupling Thermal Energy Storage with Air-Source Heat Pumps for Residential Space Heating in U.S. Cities
Authors:
An T. Pham,
Bryan Kinzer,
Ritvik Jain,
Rohini Bala Chandran,
Michael T. Craig
Abstract:
Widespread air source heat pump (ASHP) adoption faces several challenges that on-site thermal energy storage (TES), particularly thermochemical salt hydrate TES, can mitigate. No techno-economic analyses for salt-hydrate-based TES in residential applications exist. We quantify the residential space heating value of four salt hydrate TES materials - MgSO4, MgCl2, K2CO3, and SrBr2 - coupled with ASH…
▽ More
Widespread air source heat pump (ASHP) adoption faces several challenges that on-site thermal energy storage (TES), particularly thermochemical salt hydrate TES, can mitigate. No techno-economic analyses for salt-hydrate-based TES in residential applications exist. We quantify the residential space heating value of four salt hydrate TES materials - MgSO4, MgCl2, K2CO3, and SrBr2 - coupled with ASHPs across 4,800 representative households in 12 U.S. cities by embedding salt-hydrate-specific Ragone plots into a techno-economic model of coupled ASHP-TES operations. In Detroit, salt hydrate TES is projected to reduce household annual electricity costs by up to $\$$241 (8$\%$). Cost savings from TES can differ by over an order of magnitude between households and salt hydrates. We identify the most promising salt in this study, SrBr2, due to its high energy density and low humidification parasitic load. Break-even capital costs of SrBr2-based TES range from $\$$13/kWh to $\$$17/kWh, making it the only salt hydrate studied to reach and exceed the U.S. Department of Energy's $\$$15/kWh TES cost target. Sensitivities highlight the importance of variable TES sizing and efficiency losses in the value of TES.
△ Less
Submitted 29 June, 2024;
originally announced July 2024.
-
Thermodynamic, Kinetic and Mechanical Modeling to Evaluate CO2-induced Corrosion via Oxidation and Carburization in Fe, Ni alloys
Authors:
Aditya Sundar,
Aaron Feinauer,
Bryan Kinzer,
Joerg Petrasch,
Liang Qi,
Rohini Bala Chandran
Abstract:
A computational framework integrating thermodynamics, kinetics, and mechanical stress calculations is developed to study supercritical CO2 induced corrosion in model Fe-based MA956 and Ni-based H214 alloys. Empirical models parametrized using experimental data show surface oxidation and sub-surface carburization for a wide range of thermodynamic conditions (800-1200 °C, 1-250 bar). CALPHAD simulat…
▽ More
A computational framework integrating thermodynamics, kinetics, and mechanical stress calculations is developed to study supercritical CO2 induced corrosion in model Fe-based MA956 and Ni-based H214 alloys. Empirical models parametrized using experimental data show surface oxidation and sub-surface carburization for a wide range of thermodynamic conditions (800-1200 °C, 1-250 bar). CALPHAD simulations based on empirical models demonstrate higher carburization resistance in H214 compared to MA956 below 900 °C and through-thickness carburization in both alloys at higher temperatures. Finite element modeling reveals enhanced volumetric misfit induced stresses at oxide and carbide interfaces, and its critical dependence on the carbide chemistry and concentration.
△ Less
Submitted 31 May, 2023;
originally announced June 2023.
-
A Phase-Field Study on the Effects of Nanoparticles on Solidification and Grain Growth
Authors:
Bryan Kinzer,
Rohini Bala Chandran
Abstract:
Nanoparticle reinforced alloys offer the potential of high strength, high temperature alloys. While promising, during rapid solidification processes, alloys suffer from nanoparticle clustering, which can discount any strength benefit. An open-source phase-field model is developed using PRISMS-PF to explore the impact of nanoparticles and clustering on alloy solidification. Heterogenous nucleation…
▽ More
Nanoparticle reinforced alloys offer the potential of high strength, high temperature alloys. While promising, during rapid solidification processes, alloys suffer from nanoparticle clustering, which can discount any strength benefit. An open-source phase-field model is developed using PRISMS-PF to explore the impact of nanoparticles and clustering on alloy solidification. Heterogenous nucleation and grain boundary pinning are explicitly included, and a wide range of nanoparticle area fractions and nucleation rates are modeled. At low area fractions less than 0.05, particle clustering increases grain size between 15-45% compared to a random distribution. Our quantitative analyses inform a modified Zener grain size relationship that not only depends on nanoparticle size and area fraction, but also on the nucleation rate. Grain size first drastically decreases before plateauing at higher nucleation rates. Our simulations reveal a strong preference of nanoparticles pinning grain boundaries. Pinning fraction increases rapidly with nucleation rate before saturating between 0.85-0.90. Across the range of area fractions and nucleation rates considered, the random and clustered grain sizes each collapse to a simple analytical expression that depends only on nanoparticle radius and pinning fraction. Comparisons against experimental data reveal the expressions deduced from our analyses fit reported grain sizes better than classic Zener analysis. A simple model of strength and cost tradeoffs indicates nanoparticles can be a cost-effective way to improve alloy strength.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Temperature-Dependent Diffuse Reflectance Measurements of Ceramic Powders in the Near- and Mid-Infrared Spectra
Authors:
J. Michael Mayer,
James A. Abraham,
Bryan Kinzer,
Rohini Bala Chandran
Abstract:
This study focuses on experimentally measuring temperature-dependent diffuse reflectance in the near- and mid-infrared spectra for ceramic particles with applications as heat-transfer and thermal-storage media in concentrated solar power (CSP) plants. Specifically, a commercially available sintered bauxite ceramic powder, ACCUCAST ID80, and its primary chemical constituents, alumina (Al2O3) and si…
▽ More
This study focuses on experimentally measuring temperature-dependent diffuse reflectance in the near- and mid-infrared spectra for ceramic particles with applications as heat-transfer and thermal-storage media in concentrated solar power (CSP) plants. Specifically, a commercially available sintered bauxite ceramic powder, ACCUCAST ID80, and its primary chemical constituents, alumina (Al2O3) and silica (SiO2), are measured using a Fourier transform infrared spectrometer (FTIR) coupled with a specialized diffuse reflectance accessory and a heated stage. Room-temperature diffuse reflectance measurements show increased absorption in tests with greater mass fractions of the ceramic samples. There is a strong correlation in the measured reflectance spectra of ACCUCAST with alumina and silica in the spectral range 2000-500 cm-1. For the first time, temperature-dependent diffuse reflectance measurements are reported for ACCUCAST, including a novel technique for accessing reflectance values above the limiting temperature of the background material KBr. All three materials exhibit a calculated emittance of ~0.9 at room temperature. However, this value drops to 0.68 at 1000 C for ACCUCAST and ~0.43 for alumina and silica. Thermal cycling in air from 25 C to 1000 C resulted in a visible color change from dark grey to light orange for ACCUCAST and a subsequent 5X greater increase in reflectance at 4000 cm-1 as compared to ACCUCAST thermally cycled at 1000 C in vacuum. Alumina and silica spectra proved to be largely unaffected by thermal cycling under atmospheric and evacuated conditions.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.