-
PINN surrogate of Li-ion battery models for parameter inference. Part II: Regularization and application of the pseudo-2D model
Authors:
Malik Hassanaly,
Peter J. Weddle,
Ryan N. King,
Subhayan De,
Alireza Doostan,
Corey R. Randall,
Eric J. Dufek,
Andrew M. Colclasure,
Kandler Smith
Abstract:
Bayesian parameter inference is useful to improve Li-ion battery diagnostics and can help formulate battery aging models. However, it is computationally intensive and cannot be easily repeated for multiple cycles, multiple operating conditions, or multiple replicate cells. To reduce the computational cost of Bayesian calibration, numerical solvers for physics-based models can be replaced with fast…
▽ More
Bayesian parameter inference is useful to improve Li-ion battery diagnostics and can help formulate battery aging models. However, it is computationally intensive and cannot be easily repeated for multiple cycles, multiple operating conditions, or multiple replicate cells. To reduce the computational cost of Bayesian calibration, numerical solvers for physics-based models can be replaced with faster surrogates. A physics-informed neural network (PINN) is developed as a surrogate for the pseudo-2D (P2D) battery model calibration. For the P2D surrogate, additional training regularization was needed as compared to the PINN single-particle model (SPM) developed in Part I. Both the PINN SPM and P2D surrogate models are exercised for parameter inference and compared to data obtained from a direct numerical solution of the governing equations. A parameter inference study highlights the ability to use these PINNs to calibrate scaling parameters for the cathode Li diffusion and the anode exchange current density. By realizing computational speed-ups of 2250x for the P2D model, as compared to using standard integrating methods, the PINN surrogates enable rapid state-of-health diagnostics. In the low-data availability scenario, the testing error was estimated to 2mV for the SPM surrogate and 10mV for the P2D surrogate which could be mitigated with additional data.
△ Less
Submitted 26 March, 2024; v1 submitted 28 December, 2023;
originally announced December 2023.
-
PINN surrogate of Li-ion battery models for parameter inference. Part I: Implementation and multi-fidelity hierarchies for the single-particle model
Authors:
Malik Hassanaly,
Peter J. Weddle,
Ryan N. King,
Subhayan De,
Alireza Doostan,
Corey R. Randall,
Eric J. Dufek,
Andrew M. Colclasure,
Kandler Smith
Abstract:
To plan and optimize energy storage demands that account for Li-ion battery aging dynamics, techniques need to be developed to diagnose battery internal states accurately and rapidly. This study seeks to reduce the computational resources needed to determine a battery's internal states by replacing physics-based Li-ion battery models -- such as the single-particle model (SPM) and the pseudo-2D (P2…
▽ More
To plan and optimize energy storage demands that account for Li-ion battery aging dynamics, techniques need to be developed to diagnose battery internal states accurately and rapidly. This study seeks to reduce the computational resources needed to determine a battery's internal states by replacing physics-based Li-ion battery models -- such as the single-particle model (SPM) and the pseudo-2D (P2D) model -- with a physics-informed neural network (PINN) surrogate. The surrogate model makes high-throughput techniques, such as Bayesian calibration, tractable to determine battery internal parameters from voltage responses. This manuscript is the first of a two-part series that introduces PINN surrogates of Li-ion battery models for parameter inference (i.e., state-of-health diagnostics). In this first part, a method is presented for constructing a PINN surrogate of the SPM. A multi-fidelity hierarchical training, where several neural nets are trained with multiple physics-loss fidelities is shown to significantly improve the surrogate accuracy when only training on the governing equation residuals. The implementation is made available in a companion repository (https://github.com/NREL/pinnstripes). The techniques used to develop a PINN surrogate of the SPM are extended in Part II for the PINN surrogate for the P2D battery model, and explore the Bayesian calibration capabilities of both surrogates.
△ Less
Submitted 26 March, 2024; v1 submitted 28 December, 2023;
originally announced December 2023.
-
Can Generalist Foundation Models Outcompete Special-Purpose Tuning? Case Study in Medicine
Authors:
Harsha Nori,
Yin Tat Lee,
Sheng Zhang,
Dean Carignan,
Richard Edgar,
Nicolo Fusi,
Nicholas King,
Jonathan Larson,
Yuanzhi Li,
Weishung Liu,
Renqian Luo,
Scott Mayer McKinney,
Robert Osazuwa Ness,
Hoifung Poon,
Tao Qin,
Naoto Usuyama,
Chris White,
Eric Horvitz
Abstract:
Generalist foundation models such as GPT-4 have displayed surprising capabilities in a wide variety of domains and tasks. Yet, there is a prevalent assumption that they cannot match specialist capabilities of fine-tuned models. For example, most explorations to date on medical competency benchmarks have leveraged domain-specific training, as exemplified by efforts on BioGPT and Med-PaLM. We build…
▽ More
Generalist foundation models such as GPT-4 have displayed surprising capabilities in a wide variety of domains and tasks. Yet, there is a prevalent assumption that they cannot match specialist capabilities of fine-tuned models. For example, most explorations to date on medical competency benchmarks have leveraged domain-specific training, as exemplified by efforts on BioGPT and Med-PaLM. We build on a prior study of GPT-4's capabilities on medical challenge benchmarks in the absence of special training. Rather than using simple prompting to highlight the model's out-of-the-box capabilities, we perform a systematic exploration of prompt engineering. We find that prompting innovation can unlock deeper specialist capabilities and show that GPT-4 easily tops prior leading results for medical benchmarks. The prompting methods we explore are general purpose, and make no specific use of domain expertise, removing the need for expert-curated content. Our experimental design carefully controls for overfitting during the prompt engineering process. We introduce Medprompt, based on a composition of several prompting strategies. With Medprompt, GPT-4 achieves state-of-the-art results on all nine of the benchmark datasets in the MultiMedQA suite. The method outperforms leading specialist models such as Med-PaLM 2 by a significant margin with an order of magnitude fewer calls to the model. Steering GPT-4 with Medprompt achieves a 27% reduction in error rate on the MedQA dataset over the best methods to date achieved with specialist models and surpasses a score of 90% for the first time. Beyond medical problems, we show the power of Medprompt to generalize to other domains and provide evidence for the broad applicability of the approach via studies of the strategy on exams in electrical engineering, machine learning, philosophy, accounting, law, nursing, and clinical psychology.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
A Closest Point Method for Surface PDEs with Interior Boundary Conditions for Geometry Processing
Authors:
Nathan King,
Haozhe Su,
Mridul Aanjaneya,
Steven Ruuth,
Christopher Batty
Abstract:
Many geometry processing techniques require the solution of partial differential equations (PDEs) on surfaces. Such surface PDEs often involve boundary conditions prescribed on the surface, at points or curves on its interior or along the geometric (exterior) boundary of an open surface. However, input surfaces can take many forms (e.g., meshes, parametric surfaces, point clouds, level sets, neura…
▽ More
Many geometry processing techniques require the solution of partial differential equations (PDEs) on surfaces. Such surface PDEs often involve boundary conditions prescribed on the surface, at points or curves on its interior or along the geometric (exterior) boundary of an open surface. However, input surfaces can take many forms (e.g., meshes, parametric surfaces, point clouds, level sets, neural implicits). One must therefore generate a mesh to apply finite element-type techniques or derive specialized discretization procedures for each surface representation.
We propose instead to address such problems through a novel extension of the closest point method (CPM) to handle interior boundary conditions specified at surface points or curves. CPM solves the surface PDE by solving a volumetric PDE defined over the Cartesian embedding space containing the surface; only a closest point function is required to represent the surface. As such, CPM supports surfaces that are open or closed, orientable or not, and of any codimension or even mixed-codimension. To enable support for interior boundary conditions, we develop a method to implicitly partition the embedding space across interior boundaries. CPM's finite difference and interpolation stencils are adapted to respect this partition while preserving second-order accuracy. Furthermore, an efficient sparse-grid implementation and numerical solver is developed that can scale to tens of millions of degrees of freedom, allowing PDEs to be solved on more complex surfaces. We demonstrate our method's convergence behaviour on selected model PDEs. Several geometry processing problems are explored: diffusion curves on surfaces, geodesic distance, tangent vector field design, and harmonic map construction. Our proposed approach thus offers a powerful and flexible new tool for a range of geometry processing tasks on general surface representations.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
Supporting Human-AI Collaboration in Auditing LLMs with LLMs
Authors:
Charvi Rastogi,
Marco Tulio Ribeiro,
Nicholas King,
Harsha Nori,
Saleema Amershi
Abstract:
Large language models are becoming increasingly pervasive and ubiquitous in society via deployment in sociotechnical systems. Yet these language models, be it for classification or generation, have been shown to be biased and behave irresponsibly, causing harm to people at scale. It is crucial to audit these language models rigorously. Existing auditing tools leverage either or both humans and AI…
▽ More
Large language models are becoming increasingly pervasive and ubiquitous in society via deployment in sociotechnical systems. Yet these language models, be it for classification or generation, have been shown to be biased and behave irresponsibly, causing harm to people at scale. It is crucial to audit these language models rigorously. Existing auditing tools leverage either or both humans and AI to find failures. In this work, we draw upon literature in human-AI collaboration and sensemaking, and conduct interviews with research experts in safe and fair AI, to build upon the auditing tool: AdaTest (Ribeiro and Lundberg, 2022), which is powered by a generative large language model (LLM). Through the design process we highlight the importance of sensemaking and human-AI communication to leverage complementary strengths of humans and generative models in collaborative auditing. To evaluate the effectiveness of the augmented tool, AdaTest++, we conduct user studies with participants auditing two commercial language models: OpenAI's GPT-3 and Azure's sentiment analysis model. Qualitative analysis shows that AdaTest++ effectively leverages human strengths such as schematization, hypothesis formation and testing. Further, with our tool, participants identified a variety of failures modes, covering 26 different topics over 2 tasks, that have been shown before in formal audits and also those previously under-reported.
△ Less
Submitted 30 November, 2023; v1 submitted 19 April, 2023;
originally announced April 2023.
-
Capabilities of GPT-4 on Medical Challenge Problems
Authors:
Harsha Nori,
Nicholas King,
Scott Mayer McKinney,
Dean Carignan,
Eric Horvitz
Abstract:
Large language models (LLMs) have demonstrated remarkable capabilities in natural language understanding and generation across various domains, including medicine. We present a comprehensive evaluation of GPT-4, a state-of-the-art LLM, on medical competency examinations and benchmark datasets. GPT-4 is a general-purpose model that is not specialized for medical problems through training or enginee…
▽ More
Large language models (LLMs) have demonstrated remarkable capabilities in natural language understanding and generation across various domains, including medicine. We present a comprehensive evaluation of GPT-4, a state-of-the-art LLM, on medical competency examinations and benchmark datasets. GPT-4 is a general-purpose model that is not specialized for medical problems through training or engineered to solve clinical tasks. Our analysis covers two sets of official practice materials for the USMLE, a three-step examination program used to assess clinical competency and grant licensure in the United States. We also evaluate performance on the MultiMedQA suite of benchmark datasets. Beyond measuring model performance, experiments were conducted to investigate the influence of test questions containing both text and images on model performance, probe for memorization of content during training, and study probability calibration, which is of critical importance in high-stakes applications like medicine. Our results show that GPT-4, without any specialized prompt crafting, exceeds the passing score on USMLE by over 20 points and outperforms earlier general-purpose models (GPT-3.5) as well as models specifically fine-tuned on medical knowledge (Med-PaLM, a prompt-tuned version of Flan-PaLM 540B). In addition, GPT-4 is significantly better calibrated than GPT-3.5, demonstrating a much-improved ability to predict the likelihood that its answers are correct. We also explore the behavior of the model qualitatively through a case study that shows the ability of GPT-4 to explain medical reasoning, personalize explanations to students, and interactively craft new counterfactual scenarios around a medical case. Implications of the findings are discussed for potential uses of GPT-4 in medical education, assessment, and clinical practice, with appropriate attention to challenges of accuracy and safety.
△ Less
Submitted 12 April, 2023; v1 submitted 20 March, 2023;
originally announced March 2023.
-
Bi-fidelity Modeling of Uncertain and Partially Unknown Systems using DeepONets
Authors:
Subhayan De,
Matthew Reynolds,
Malik Hassanaly,
Ryan N. King,
Alireza Doostan
Abstract:
Recent advances in modeling large-scale complex physical systems have shifted research focuses towards data-driven techniques. However, generating datasets by simulating complex systems can require significant computational resources. Similarly, acquiring experimental datasets can prove difficult as well. For these systems, often computationally inexpensive, but in general inaccurate, models, know…
▽ More
Recent advances in modeling large-scale complex physical systems have shifted research focuses towards data-driven techniques. However, generating datasets by simulating complex systems can require significant computational resources. Similarly, acquiring experimental datasets can prove difficult as well. For these systems, often computationally inexpensive, but in general inaccurate, models, known as the low-fidelity models, are available. In this paper, we propose a bi-fidelity modeling approach for complex physical systems, where we model the discrepancy between the true system's response and low-fidelity response in the presence of a small training dataset from the true system's response using a deep operator network (DeepONet), a neural network architecture suitable for approximating nonlinear operators. We apply the approach to model systems that have parametric uncertainty and are partially unknown. Three numerical examples are used to show the efficacy of the proposed approach to model uncertain and partially unknown complex physical systems.
△ Less
Submitted 18 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
GANISP: a GAN-assisted Importance SPlitting Probability Estimator
Authors:
Malik Hassanaly,
Andrew Glaws,
Ryan N. King
Abstract:
Designing manufacturing processes with high yield and strong reliability relies on effective methods for rare event estimation. Genealogical importance splitting reduces the variance of rare event probability estimators by iteratively selecting and replicating realizations that are headed towards a rare event. The replication step is difficult when applied to deterministic systems where the initia…
▽ More
Designing manufacturing processes with high yield and strong reliability relies on effective methods for rare event estimation. Genealogical importance splitting reduces the variance of rare event probability estimators by iteratively selecting and replicating realizations that are headed towards a rare event. The replication step is difficult when applied to deterministic systems where the initial conditions of the offspring realizations need to be modified. Typically, a random perturbation is applied to the offspring to differentiate their trajectory from the parent realization. However, this random perturbation strategy may be effective for some systems while failing for others, preventing variance reduction in the probability estimate. This work seeks to address this limitation using a generative model such as a Generative Adversarial Network (GAN) to generate perturbations that are consistent with the attractor of the dynamical system. The proposed GAN-assisted Importance SPlitting method (GANISP) improves the variance reduction for the system targeted. An implementation of the method is available in a companion repository (https://github.com/NREL/GANISP).
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
Adversarial sampling of unknown and high-dimensional conditional distributions
Authors:
Malik Hassanaly,
Andrew Glaws,
Karen Stengel,
Ryan N. King
Abstract:
Many engineering problems require the prediction of realization-to-realization variability or a refined description of modeled quantities. In that case, it is necessary to sample elements from unknown high-dimensional spaces with possibly millions of degrees of freedom. While there exist methods able to sample elements from probability density functions (PDF) with known shapes, several approximati…
▽ More
Many engineering problems require the prediction of realization-to-realization variability or a refined description of modeled quantities. In that case, it is necessary to sample elements from unknown high-dimensional spaces with possibly millions of degrees of freedom. While there exist methods able to sample elements from probability density functions (PDF) with known shapes, several approximations need to be made when the distribution is unknown. In this paper the sampling method, as well as the inference of the underlying distribution, are both handled with a data-driven method known as generative adversarial networks (GAN), which trains two competing neural networks to produce a network that can effectively generate samples from the training set distribution. In practice, it is often necessary to draw samples from conditional distributions. When the conditional variables are continuous, only one (if any) data point corresponding to a particular value of a conditioning variable may be available, which is not sufficient to estimate the conditional distribution. This work handles this problem using an a priori estimation of the conditional moments of a PDF. Two approaches, stochastic estimation, and an external neural network are compared here for computing these moments; however, any preferred method can be used. The algorithm is demonstrated in the case of the deconvolution of a filtered turbulent flow field. It is shown that all the versions of the proposed algorithm effectively sample the target conditional distribution with minimal impact on the quality of the samples compared to state-of-the-art methods. Additionally, the procedure can be used as a metric for the diversity of samples generated by a conditional GAN (cGAN) conditioned with continuous variables.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Hamiltonian Dynamics of Semiclassical Gaussian Wave Packets in Electromagnetic Potentials
Authors:
Nolan King,
Tomoki Ohsawa
Abstract:
We extend our previous work on symplectic semiclassical Gaussian wave packet dynamics to incorporate electromagnetic interactions by including a vector potential. The main advantage of our formulation is that the equations of motion derived are naturally Hamiltonian. We obtain an asymptotic expansion of our equations in terms of $\hbar$ and show that our equations have $\mathcal{O}(\hbar)$ correct…
▽ More
We extend our previous work on symplectic semiclassical Gaussian wave packet dynamics to incorporate electromagnetic interactions by including a vector potential. The main advantage of our formulation is that the equations of motion derived are naturally Hamiltonian. We obtain an asymptotic expansion of our equations in terms of $\hbar$ and show that our equations have $\mathcal{O}(\hbar)$ corrections to those presented by Zhou, whereas ours also recover the equations of Zhou in the case of a linear vector potential and quadratic scalar potential. One and two dimensional examples of a particle in a magnetic field are given and numerical solutions are presented and compared with the classical solutions and the expectation values of the corresponding observables as calculated by the Egorov or Initial Value Representation (IVR) method. We numerically demonstrate that the $\mathcal{O}(\hbar)$ correction terms improve the accuracy of the classical or Zhou's equations for short times in the sense that our solutions converge to the expectation values calculated using the Egorov/IVR method faster than the classical solutions or those of Zhou as $\hbar \to 0$.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Rutile TiO2 Bulk Structural and Vibrational Properties: A DFT Study on the Importance of Pseudopotentials
Authors:
Sugata Chowdhury,
Nacole King,
Winnie Wong-Ng
Abstract:
Using first-principal density functional theory (DFT) we explained the importance of pseudopotential for decribing the electronic and vibrational properties of rutile TiO2 (R-TiO2). Calculations were performed using the generalized gradient approximation (GGA), local density approximation (LDA) and hybrid functional (HSE), with normconserving, ultrasoft and projector augmented wave (PAW) pseudopot…
▽ More
Using first-principal density functional theory (DFT) we explained the importance of pseudopotential for decribing the electronic and vibrational properties of rutile TiO2 (R-TiO2). Calculations were performed using the generalized gradient approximation (GGA), local density approximation (LDA) and hybrid functional (HSE), with normconserving, ultrasoft and projector augmented wave (PAW) pseudopotential. The choice of an appropriate exchange-correlation functionals and the pseudopotential within DFT is critical to explain the different properties of R-TiO2. We found that the lattice parameters predicted by the norm-conserving pseudopotential and GGA are in excellent agreement with experimental data. Our studies reveal that norm-conserving pseudopotentials with GGA exchange-correlations provide much improvement for the prediction of the electronic properties of TiO2. We observed that, using LDA and ultrasoft pseudopotential is an excellent combination to describe the vibrational properties of R-TiO2. Furthermore, we observed the temperature dependent asymmetric nature of vibrational modes due to changes of bond lengths and different lattice vibrations.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Identifying the Best Machine Learning Algorithms for Brain Tumor Segmentation, Progression Assessment, and Overall Survival Prediction in the BRATS Challenge
Authors:
Spyridon Bakas,
Mauricio Reyes,
Andras Jakab,
Stefan Bauer,
Markus Rempfler,
Alessandro Crimi,
Russell Takeshi Shinohara,
Christoph Berger,
Sung Min Ha,
Martin Rozycki,
Marcel Prastawa,
Esther Alberts,
Jana Lipkova,
John Freymann,
Justin Kirby,
Michel Bilello,
Hassan Fathallah-Shaykh,
Roland Wiest,
Jan Kirschke,
Benedikt Wiestler,
Rivka Colen,
Aikaterini Kotrotsou,
Pamela Lamontagne,
Daniel Marcus,
Mikhail Milchenko
, et al. (402 additional authors not shown)
Abstract:
Gliomas are the most common primary brain malignancies, with different degrees of aggressiveness, variable prognosis and various heterogeneous histologic sub-regions, i.e., peritumoral edematous/invaded tissue, necrotic core, active and non-enhancing core. This intrinsic heterogeneity is also portrayed in their radio-phenotype, as their sub-regions are depicted by varying intensity profiles dissem…
▽ More
Gliomas are the most common primary brain malignancies, with different degrees of aggressiveness, variable prognosis and various heterogeneous histologic sub-regions, i.e., peritumoral edematous/invaded tissue, necrotic core, active and non-enhancing core. This intrinsic heterogeneity is also portrayed in their radio-phenotype, as their sub-regions are depicted by varying intensity profiles disseminated across multi-parametric magnetic resonance imaging (mpMRI) scans, reflecting varying biological properties. Their heterogeneous shape, extent, and location are some of the factors that make these tumors difficult to resect, and in some cases inoperable. The amount of resected tumor is a factor also considered in longitudinal scans, when evaluating the apparent tumor for potential diagnosis of progression. Furthermore, there is mounting evidence that accurate segmentation of the various tumor sub-regions can offer the basis for quantitative image analysis towards prediction of patient overall survival. This study assesses the state-of-the-art machine learning (ML) methods used for brain tumor image analysis in mpMRI scans, during the last seven instances of the International Brain Tumor Segmentation (BraTS) challenge, i.e., 2012-2018. Specifically, we focus on i) evaluating segmentations of the various glioma sub-regions in pre-operative mpMRI scans, ii) assessing potential tumor progression by virtue of longitudinal growth of tumor sub-regions, beyond use of the RECIST/RANO criteria, and iii) predicting the overall survival from pre-operative mpMRI scans of patients that underwent gross total resection. Finally, we investigate the challenge of identifying the best ML algorithms for each of these tasks, considering that apart from being diverse on each instance of the challenge, the multi-institutional mpMRI BraTS dataset has also been a continuously evolving/growing dataset.
△ Less
Submitted 23 April, 2019; v1 submitted 5 November, 2018;
originally announced November 2018.
-
Advanced Scenario Creation Strategies for Stochastic Economic Dispatch with Renewables
Authors:
Ryan N. King,
Matthew Reynolds,
Devon Sigler,
Wesley Jones
Abstract:
Real-time dispatch practices for operating the electric grid in an economic and reliable manner are evolving to accommodate higher levels of renewable energy generation. In particular, stochastic optimization is receiving increased attention as a technique for handling the inherent uncertainty in wind and solar generation. The typical two-stage stochastic optimization formulation relies on a sampl…
▽ More
Real-time dispatch practices for operating the electric grid in an economic and reliable manner are evolving to accommodate higher levels of renewable energy generation. In particular, stochastic optimization is receiving increased attention as a technique for handling the inherent uncertainty in wind and solar generation. The typical two-stage stochastic optimization formulation relies on a sample average approximation with scenarios representing errors in forecasting renewable energy ramp events. Standard Monte Carlo sampling approaches can result in prohibitively high-dimensional systems for optimization, as well as a poor representation of extreme events that challenge grid reliability. We propose two alternative scenario creation strategies, importance sampling and Bayesian quadrature, that can reduce the estimator's variance. Their performance is assessed on a week's worth of 5 minute stochastic economic dispatch decisions for realistic wind and electrical system data. Both strategies yield more economic solutions and improved reliability compared to Monte Carlo sampling, with Bayesian quadrature being less computationally intensive than importance sampling and more economic when considering at least 20 scenarios.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Solving variational problems and partial differential equations that map between manifolds via the closest point method
Authors:
Nathan D. King,
Steven J. Ruuth
Abstract:
Maps from a source manifold $ {\mathcal M}$ to a target manifold ${\mathcal N}$ appear in liquid crystals, colour image enhancement, texture map**, brain map**, and many other areas. A numerical framework to solve variational problems and partial differential equations (PDEs) that map between manifolds is introduced within this paper. Our approach, the closest point method for manifold map**…
▽ More
Maps from a source manifold $ {\mathcal M}$ to a target manifold ${\mathcal N}$ appear in liquid crystals, colour image enhancement, texture map**, brain map**, and many other areas. A numerical framework to solve variational problems and partial differential equations (PDEs) that map between manifolds is introduced within this paper. Our approach, the closest point method for manifold map**, reduces the problem of solving a constrained PDE between manifolds ${\mathcal M}$ and ${\mathcal N}$ to the simpler problems of solving a PDE on ${\mathcal M}$ and projecting to the closest points on ${\mathcal N}.$ In our approach, an embedding PDE is formulated in the embedding space using closest point representations of ${\mathcal M}$ and ${\mathcal N}.$ This enables the use of standard Cartesian numerics for general manifolds that are open or closed, with or without orientation, and of any codimension. An algorithm is presented for the important example of harmonic maps and generalized to a broader class of PDEs, which includes $p$-harmonic maps. Improved efficiency and robustness are observed in convergence studies relative to the level set embedding methods. Harmonic and $p$-harmonic maps are computed for a variety of numerical examples. In these examples, we denoise texture maps, diffuse random maps between general manifolds, and enhance colour images.
△ Less
Submitted 26 October, 2017;
originally announced October 2017.
-
Phase-Encoded Hyperpolarized Nanodiamond for Magnetic Resonance Imaging
Authors:
David E. J. Waddington,
Thomas Boele,
Ewa Rej,
Dane R. McCamey,
Nicholas J. C. King,
Torsten Gaebel,
David J. Reilly
Abstract:
Surface-functionalized nanomaterials can act as theranostic agents that detect disease and track biological processes using hyperpolarized magnetic resonance imaging (MRI). Candidate materials are sparse however, requiring spinful nuclei with long spin-lattice relaxation (T1) and spin-dephasing times (T2), together with a reservoir of electrons to impart hyperpolarization. Here, we demonstrate the…
▽ More
Surface-functionalized nanomaterials can act as theranostic agents that detect disease and track biological processes using hyperpolarized magnetic resonance imaging (MRI). Candidate materials are sparse however, requiring spinful nuclei with long spin-lattice relaxation (T1) and spin-dephasing times (T2), together with a reservoir of electrons to impart hyperpolarization. Here, we demonstrate the versatility of the nanodiamond material system for hyperpolarized 13C MRI, making use of its intrinsic paramagnetic defect centers, hours-long nuclear T1 times, and T2 times suitable for spatially resolving millimeter-scale structures. Combining these properties, we enable a new imaging modality that exploits the phase-contrast between spins encoded with a hyperpolarization that is aligned, or anti-aligned with the external magnetic field. The use of phase-encoded hyperpolarization allows nanodiamonds to be tagged and distinguished in an MRI based on their spin-orientation alone, and could permit the action of specific bio-functionalized complexes to be directly compared and imaged.
△ Less
Submitted 30 August, 2017;
originally announced September 2017.
-
Shot noise suppression at room temperature in atomic-scale Au junctions
Authors:
P. J. Wheeler,
J. N. Russom,
K. Evans,
N. S. King,
D. Natelson
Abstract:
Shot noise encodes additional information not directly inferable from simple electronic transport measurements. Previous measurements in atomic-scale metal junctions at cryogenic temperatures have shown suppression of the shot noise at particular conductance values. This suppression demonstrates that transport in these structures proceeds via discrete quantum channels. Using a high frequency te…
▽ More
Shot noise encodes additional information not directly inferable from simple electronic transport measurements. Previous measurements in atomic-scale metal junctions at cryogenic temperatures have shown suppression of the shot noise at particular conductance values. This suppression demonstrates that transport in these structures proceeds via discrete quantum channels. Using a high frequency technique, we simultaneously acquire noise data and conductance histograms in Au junctions at room temperature and ambient conditions. We observe noise suppression at up to three conductance quanta, with possible indications of current-induced local heating and $1/f$ noise in the contact region at high biases. These measurements demonstrate the quantum character of transport at room temperature at the atomic scale. This technique provides an additional tool for studying dissipation and correlations in nanodevices.
△ Less
Submitted 7 March, 2010;
originally announced March 2010.
-
Gyrotropic impact upon negatively refracting surfaces
Authors:
Allan D. Boardman,
Neil King,
Yuriy Rapoport,
Larry Velasco
Abstract:
Surface wave propagation at the interface between different types of gyrotropic materials and an isotropic negatively refracting medium, in which the relative permittivity and relative permeability are, simultaneously, negative is investigated. A general approach is taken that embraces both gyroelectric and gyromagnetic materials, permitting the possibility of operating in either the low GHz, TH…
▽ More
Surface wave propagation at the interface between different types of gyrotropic materials and an isotropic negatively refracting medium, in which the relative permittivity and relative permeability are, simultaneously, negative is investigated. A general approach is taken that embraces both gyroelectric and gyromagnetic materials, permitting the possibility of operating in either the low GHz, THz or the optical frequency regimes. The classical transverse Voigt configuration is adopted and a complete analysis of non-reciprocal surface wave dispersion is presented. The impact of the surface polariton modes upon the reflection of both plane waves and beams is discussed in terms of resonances and an example of the influence upon the Goos-Hanchen shift is given.
△ Less
Submitted 17 March, 2006;
originally announced March 2006.
-
Ultra-narrow Bright Spatial Solitons Interacting with Left-handed Surfaces
Authors:
Allan D. Boardman,
Larry Velasco,
Neil King,
Yuriy Rapoport
Abstract:
A vectorial FDTD method is used to present a numerical study of very narrow spatial solitons interacting with the surface of what has become known as a left-handed medium. After a comprehensive discussion of the background and the family of surface modes to be expected on a left-handed material, bounded by dispersion-free right-handed material, it is demonstrated that robust outcomes of the FDTD…
▽ More
A vectorial FDTD method is used to present a numerical study of very narrow spatial solitons interacting with the surface of what has become known as a left-handed medium. After a comprehensive discussion of the background and the family of surface modes to be expected on a left-handed material, bounded by dispersion-free right-handed material, it is demonstrated that robust outcomes of the FDTD approach yield dramatic confirmation of these waves. The FDTD results show how the linear and nonlinear surface modes are created and can be tracked in time as they develop. It is shown how they can move backwards, or forwards, depending either upon a critical value of the local nonlinear conditions at the interface, or the ambient linear conditions. Several examples are given to demonstrate the power and versatility of the method, and the sensitivity to the launching conditions.
△ Less
Submitted 13 March, 2006;
originally announced March 2006.
-
Control of planar nonlinear guided waves and spatial solitons with a left-handed medium
Authors:
Allan D. Boardman,
Peter Egan,
Larry Velasco,
Neil King
Abstract:
The evidence that double negative media, with an effective negative permittivity, and an effective negative permeability, can be manufactured to operate at frequencies ranging from microwave to optical is ushering in a new era of metamaterials. They are referred to here as 'left-handed', even though a variety of names is evident from the literature. In anticipation of a demand for highly structu…
▽ More
The evidence that double negative media, with an effective negative permittivity, and an effective negative permeability, can be manufactured to operate at frequencies ranging from microwave to optical is ushering in a new era of metamaterials. They are referred to here as 'left-handed', even though a variety of names is evident from the literature. In anticipation of a demand for highly structured integrated practical waveguides, this paper addresses the impact of this type of medium upon waveguides that can be also nonlinear. After an interesting historical overview and an exposure of some straightforward concepts, a planar guide is investigated, in which the waveguide is a slab consisting of a left-handed medium sandwiched between a substrate and cladding that are simple dielectrics. The substrate and cladding display a Kerr-type nonlinear response. Because of the nonlinear properties of the Kerr media, the power flow direction can be controlled by the intensity of the electric field. A comprehensive finite-difference-time-domain (FDTD) analysis is presented that concentrates upon spatial soliton behaviour. An interesting soliton-lens arrangement is investigated that lends itself to a novel cancellation effect.
△ Less
Submitted 7 March, 2006;
originally announced March 2006.
-
Negative Refraction in Perspective
Authors:
Allan D. Boardman,
Neil King,
Larry Velasco
Abstract:
The concept of negative refraction is attracting a lot of attention. The initial ideas and the misconceptions that have arisen are discussed in sufficient detail to understand the conceptual structure that binds negative refraction to the existence of backward wave and forward wave phenomena. A presentation of the properties of isotropic media supporting backward waves is followed by a discussio…
▽ More
The concept of negative refraction is attracting a lot of attention. The initial ideas and the misconceptions that have arisen are discussed in sufficient detail to understand the conceptual structure that binds negative refraction to the existence of backward wave and forward wave phenomena. A presentation of the properties of isotropic media supporting backward waves is followed by a discussion of negative phase velocity media, causality, anisotropic crystals and some connections to photonic crystals. The historical background is always coupled to a detailed presentation of all the issues. The paper is driven numerically and is illustrated with the outcomes of original FDTD simulations.
△ Less
Submitted 21 August, 2005;
originally announced August 2005.
-
Massive Field Stars and the Stellar Clustering Law
Authors:
M. S. Oey,
N. L. King,
J. Wm. Parker
Abstract:
The distribution of N*, the number of OB stars per association or cluster, appears to follow a universal power-law form $N*^{-2}$ in the local Universe. We evaluate the distribution of N* in the Small Magellanic Cloud using recent broadband optical and space-ultraviolet data, with special attention to the lowest values of N*. We find that the power-law distribution in N* continues smoothly down…
▽ More
The distribution of N*, the number of OB stars per association or cluster, appears to follow a universal power-law form $N*^{-2}$ in the local Universe. We evaluate the distribution of N* in the Small Magellanic Cloud using recent broadband optical and space-ultraviolet data, with special attention to the lowest values of N*. We find that the power-law distribution in N* continues smoothly down to N*=1. This strongly suggests that the formation of field massive stars is a continuous process with those in associations, and that the field stars do not originate from a different star formation mode. Our results are consistent with the model that field massive stars represent the most massive members in groups of smaller stars, as expected if the clustering law applies to much lower masses as is expected from the stellar initial mass function (IMF). These results are consistent with the simultaneous existence of a universal IMF and a universal clustering law. Jointly, these laws imply that the fraction of field OB stars typically ranges from about 35% to 7% for most astrophysical situations, with an inverse logarithmic dependence on the most populous cluster, and hence, on galaxy size and/or star formation rate. There are important consequences for global feedback effects in galaxies: field stars should therefore contribute proportionately to the volume of the warm ionized medium, and equal relative contributions by superbubbles of all sizes to the interstellar porosity are expected.
△ Less
Submitted 1 December, 2003;
originally announced December 2003.
-
HII Shells Surrounding Wolf-Rayet stars in M31
Authors:
M. A. Bransford,
D. A. Thilker,
R. A. M. Walterbos,
N. L. King
Abstract:
We present the results of an ongoing investigation to provide a detailed view of the processes by which massive stars shape the surrounding interstellar medium (ISM), from pc to kpc scales. In this paper we have focused on studying the environments of Wolf-Rayet (WR) stars in M31 to find evidence for WR wind-ISM interactions, through imaging ionized hydrogen nebulae surrounding these stars.
We…
▽ More
We present the results of an ongoing investigation to provide a detailed view of the processes by which massive stars shape the surrounding interstellar medium (ISM), from pc to kpc scales. In this paper we have focused on studying the environments of Wolf-Rayet (WR) stars in M31 to find evidence for WR wind-ISM interactions, through imaging ionized hydrogen nebulae surrounding these stars.
We have conducted a systematic survey for HII shells surrounding 48 of the 49 known WR stars in M31. There are 17 WR stars surrounded by single shells, or shell fragments, 7 stars surrounded by concentric limb brightened shells, 20 stars where there is no clear physical association of the star with nearby H-alpha emission, and 4 stars which lack nearby H-alpha emission. For the 17+7 shells above, there are 12 which contain one or two massive stars (including a WR star) and that are <=40 pc in radius. These 12 shells may be classical WR ejecta or wind-blown shells. Further, there may be excess H-alpha point source emission associated with one of the 12 WR stars surrounded by putative ejecta or wind-blown shells. There is also evidence for excess point source emission associated with 11 other WR stars. The excess emission may arise from unresolved circumstellar shells, or within the extended outer envelopes of the stars themselves.
In a few cases we find clear morphological evidence for WR shells interacting with each other. In several H-alpha images we see WR winds disrupting, or punching through, the walls of limb-brightened HII shells.
△ Less
Submitted 7 July, 1999;
originally announced July 1999.
-
Are Antiprotons Forever?
Authors:
M. H. Holzscheiter,
X. Feng,
T. Goldman,
N. S. P. King,
R. A. Lewis,
M. M. Nieto,
G. A. Smith
Abstract:
Up to one million antiprotons from a single LEAR spill have been captured in a large Penning trap. Surprisingly, when the antiprotons are cooled to energies significantly below 1 eV, the annihilation rate falls below background. Thus, very long storage times for antiprotons have been demonstrated in the trap, even at the compromised vacuum conditions imposed by the experimental set up. The signi…
▽ More
Up to one million antiprotons from a single LEAR spill have been captured in a large Penning trap. Surprisingly, when the antiprotons are cooled to energies significantly below 1 eV, the annihilation rate falls below background. Thus, very long storage times for antiprotons have been demonstrated in the trap, even at the compromised vacuum conditions imposed by the experimental set up. The significance for future ultra-low energy experiments, including portable antiproton traps, is discussed.
△ Less
Submitted 11 October, 1995; v1 submitted 29 June, 1995;
originally announced June 1995.