-
A comment on comparing optimization on D-Wave and IBM quantum processors
Authors:
Catherine C. McGeoch,
Kevin Chern,
Pau Farré,
Andrew K. King
Abstract:
Recent work [Sachdeva et al.] presented an iterative hybrid quantum variational optimization algorithm designed by Q-CTRL and executed on IBM gate-based quantum processing units (QPUs), claiming a significant performance advantage against a D-Wave quantum annealer. Here we point out major methodological problems with this comparison. Using a simple unoptimized workflow for quantum annealing, we sh…
▽ More
Recent work [Sachdeva et al.] presented an iterative hybrid quantum variational optimization algorithm designed by Q-CTRL and executed on IBM gate-based quantum processing units (QPUs), claiming a significant performance advantage against a D-Wave quantum annealer. Here we point out major methodological problems with this comparison. Using a simple unoptimized workflow for quantum annealing, we show success probabilities multiple orders of magnitude higher than those reported by [Sachdeva et al.]. These results, which can be reproduced using open-source code and free trial access to a D-Wave quantum annealer, contradict Q-CTRL's claims of superior performance. We also provide a direct comparison between quantum annealing and a recent demonstration of digitized quantum annealing on an IBM processor, showing that analog quantum annealing on a D-Wave QPU reaches far lower energies than digitized quantum annealing on an IBM QPU.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Approximate filtering via discrete dual processes
Authors:
Guillaume Kon Kam King,
Andrea Pandolfi,
Marco Piretto,
Matteo Ruggiero
Abstract:
We consider the task of filtering a dynamic parameter evolving as a diffusion process, given data collected at discrete times from a likelihood which is conjugate to the marginal law of the diffusion, when a generic dual process on a discrete state space is available. Recently, it was shown that duality with respect to a death-like process implies that the filtering distributions are finite mixtur…
▽ More
We consider the task of filtering a dynamic parameter evolving as a diffusion process, given data collected at discrete times from a likelihood which is conjugate to the marginal law of the diffusion, when a generic dual process on a discrete state space is available. Recently, it was shown that duality with respect to a death-like process implies that the filtering distributions are finite mixtures, making exact filtering and smoothing feasible through recursive algorithms with polynomial complexity in the number of observations. Here we provide general results for the case of duality between the diffusion and a regular jump continuous-time Markov chain on a discrete state space, which typically leads to filtering distribution given by countable mixtures indexed by the dual process state space. We investigate the performance of several approximation strategies on two hidden Markov models driven by Cox-Ingersoll-Ross and Wright-Fisher diffusions, which admit duals of birth-and-death type, and compare them with the available exact strategies based on death-type duals and with bootstrap particle filtering on the diffusion state space as a general benchmark.
△ Less
Submitted 28 November, 2023; v1 submitted 1 October, 2023;
originally announced October 2023.
-
Decoding Neural Activity to Assess Individual Latent State in Ecologically Valid Contexts
Authors:
Stephen M. Gordon,
Jonathan R. McDaniel,
Kevin W. King,
Vernon J. Lawhern,
Jonathan Touryan
Abstract:
There exist very few ways to isolate cognitive processes, historically defined via highly controlled laboratory studies, in more ecologically valid contexts. Specifically, it remains unclear as to what extent patterns of neural activity observed under such constraints actually manifest outside the laboratory in a manner that can be used to make an accurate inference about the latent state, associa…
▽ More
There exist very few ways to isolate cognitive processes, historically defined via highly controlled laboratory studies, in more ecologically valid contexts. Specifically, it remains unclear as to what extent patterns of neural activity observed under such constraints actually manifest outside the laboratory in a manner that can be used to make an accurate inference about the latent state, associated cognitive process, or proximal behavior of the individual. Improving our understanding of when and how specific patterns of neural activity manifest in ecologically valid scenarios would provide validation for laboratory-based approaches that study similar neural phenomena in isolation and meaningful insight into the latent states that occur during complex tasks. We argue that domain generalization methods from the brain-computer interface community have the potential to address this challenge. We previously used such an approach to decode phasic neural responses associated with visual target discrimination. Here, we extend that work to more tonic phenomena such as internal latent states. We use data from two highly controlled laboratory paradigms to train two separate domain-generalized models. We apply the trained models to an ecologically valid paradigm in which participants performed multiple, concurrent driving-related tasks. Using the pretrained models, we derive estimates of the underlying latent state and associated patterns of neural activity. Importantly, as the patterns of neural activity change along the axis defined by the original training data, we find changes in behavior and task performance consistent with the observations from the original, laboratory paradigms. We argue that these results lend ecological validity to those experimental designs and provide a methodology for understanding the relationship between observed neural activity and behavior during complex tasks.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Bayesian mixture models (in)consistency for the number of clusters
Authors:
Louise Alamichel,
Daria Bystrova,
Julyan Arbel,
Guillaume Kon Kam King
Abstract:
Bayesian nonparametric mixture models are common for modeling complex data. While these models are well-suited for density estimation, recent results proved posterior inconsistency of the number of clusters when the true number of components is finite, for the Dirichlet process and Pitman--Yor process mixture models. We extend these results to additional Bayesian nonparametric priors such as Gibbs…
▽ More
Bayesian nonparametric mixture models are common for modeling complex data. While these models are well-suited for density estimation, recent results proved posterior inconsistency of the number of clusters when the true number of components is finite, for the Dirichlet process and Pitman--Yor process mixture models. We extend these results to additional Bayesian nonparametric priors such as Gibbs-type processes and finite-dimensional representations thereof. The latter include the Dirichlet multinomial process, the recently proposed Pitman-Yor, and normalized generalized gamma multinomial processes. We show that mixture models based on these processes are also inconsistent in the number of clusters and discuss possible solutions. Notably, we show that a post-processing algorithm introduced for the Dirichlet process can be extended to more general models and provides a consistent method to estimate the number of components.
△ Less
Submitted 30 May, 2024; v1 submitted 25 October, 2022;
originally announced October 2022.
-
Bayesian high-dimensional covariate selection in non-linear mixed-effects models using the SAEM algorithm
Authors:
Marion Naveau,
Guillaume Kon Kam King,
Renaud Rincent,
Laure Sansonnet,
Maud Delattre
Abstract:
High-dimensional variable selection, with many more covariates than observations, is widely documented in standard regression models, but there are still few tools to address it in non-linear mixed-effects models where data are collected repeatedly on several individuals. In this work, variable selection is approached from a Bayesian perspective and a selection procedure is proposed, combining the…
▽ More
High-dimensional variable selection, with many more covariates than observations, is widely documented in standard regression models, but there are still few tools to address it in non-linear mixed-effects models where data are collected repeatedly on several individuals. In this work, variable selection is approached from a Bayesian perspective and a selection procedure is proposed, combining the use of a spike-and-slab prior and the Stochastic Approximation version of the Expectation Maximisation (SAEM) algorithm. Similarly to Lasso regression, the set of relevant covariates is selected by exploring a grid of values for the penalisation parameter. The SAEM approach is much faster than a classical MCMC (Markov chain Monte Carlo) algorithm and our method shows very good selection performances on simulated data. Its flexibility is demonstrated by implementing it for a variety of nonlinear mixed effects models. The usefulness of the proposed method is illustrated on a problem of genetic markers identification, relevant for genomic-assisted selection in plant breeding.
△ Less
Submitted 5 April, 2024; v1 submitted 2 June, 2022;
originally announced June 2022.
-
The shape of a Gaussian mixture is characterized by the probability density of the distance between two samples
Authors:
Mireille Boutin,
Kindyl King,
Uli Walther
Abstract:
Let $\bf{x}$ be a random variable with density $ρ(x)$ taking values in ${\mathbb R}^d$. We are interested in finding a representation for the shape of $ρ(x)$, i.e. for the orbit $\{ ρ(g\cdot x) | g\in E(d) \}$ of $ρ$ under the Euclidean group. Let $x_1$ and $x_2$ be two random samples picked, independently, following $ρ(x)$, and let $Δ$ be the squared Euclidean distance between $x_1$ and $x_2$. We…
▽ More
Let $\bf{x}$ be a random variable with density $ρ(x)$ taking values in ${\mathbb R}^d$. We are interested in finding a representation for the shape of $ρ(x)$, i.e. for the orbit $\{ ρ(g\cdot x) | g\in E(d) \}$ of $ρ$ under the Euclidean group. Let $x_1$ and $x_2$ be two random samples picked, independently, following $ρ(x)$, and let $Δ$ be the squared Euclidean distance between $x_1$ and $x_2$. We show, if $ρ(x)$ is a mixture of Gaussians whose covariance matrix is the identity, and if the means of the Gaussians are in generic position, then the density $ρ(x)$ is reconstructible, up to a rigid motion in $E(d)$, from the density of $\bfΔ$. In other words, any two such Gaussian mixtures $ρ(x)$ and $\barρ (x)$ with the same distribution of distances are guaranteed to be related by a rigid motion $g\in E(d)$ as $ρ(x)=\barρ (g\cdot x)$. We also show that a similar result holds when the distance is defined by a symmetric bilinear form.
△ Less
Submitted 21 November, 2021;
originally announced November 2021.
-
BNPdensity: Bayesian nonparametric mixture modeling in R
Authors:
Julyan Arbel,
Guillaume Kon Kam King,
Antonio Lijoi,
Luis Enrique Nieto-Barajas,
Igor Prünster
Abstract:
Robust statistical data modelling under potential model mis-specification often requires leaving the parametric world for the nonparametric. In the latter, parameters are infinite dimensional objects such as functions, probability distributions or infinite vectors. In the Bayesian nonparametric approach, prior distributions are designed for these parameters, which provide a handle to manage the co…
▽ More
Robust statistical data modelling under potential model mis-specification often requires leaving the parametric world for the nonparametric. In the latter, parameters are infinite dimensional objects such as functions, probability distributions or infinite vectors. In the Bayesian nonparametric approach, prior distributions are designed for these parameters, which provide a handle to manage the complexity of nonparametric models in practice. However, most modern Bayesian nonparametric models seem often out of reach to practitioners, as inference algorithms need careful design to deal with the infinite number of parameters. The aim of this work is to facilitate the journey by providing computational tools for Bayesian nonparametric inference. The article describes a set of functions available in the \R package BNPdensity in order to carry out density estimation with an infinite mixture model, including all types of censored data. The package provides access to a large class of such models based on normalized random measures, which represent a generalization of the popular Dirichlet process mixture. One striking advantage of this generalization is that it offers much more robust priors on the number of clusters than the Dirichlet. Another crucial advantage is the complete flexibility in specifying the prior for the scale and location parameters of the clusters, because conjugacy is not required. Inference is performed using a theoretically grounded approximate sampling methodology known as the Ferguson & Klass algorithm. The package also offers several goodness of fit diagnostics such as QQ-plots, including a cross-validation criterion, the conditional predictive ordinate. The proposed methodology is illustrated on a classical ecological risk assessment method called the Species Sensitivity Distribution (SSD) problem, showcasing the benefits of the Bayesian nonparametric framework.
△ Less
Submitted 20 October, 2021; v1 submitted 19 October, 2021;
originally announced October 2021.
-
Exact inference for a class of non-linear hidden Markov models on general state spaces
Authors:
Guillaume Kon Kam King,
Omiros Papaspiliopoulos,
Matteo Ruggiero
Abstract:
Exact inference for hidden Markov models requires the evaluation of all distributions of interest - filtering, prediction, smoothing and likelihood - with a finite computational effort. This article provides sufficient conditions for exact inference for a class of hidden Markov models on general state spaces given a set of discretely collected indirect observations linked non linearly to the signa…
▽ More
Exact inference for hidden Markov models requires the evaluation of all distributions of interest - filtering, prediction, smoothing and likelihood - with a finite computational effort. This article provides sufficient conditions for exact inference for a class of hidden Markov models on general state spaces given a set of discretely collected indirect observations linked non linearly to the signal, and a set of practical algorithms for inference. The conditions we obtain are concerned with the existence of a certain type of dual process, which is an auxiliary process embedded in the time reversal of the signal, that in turn allows to represent the distributions and functions of interest as finite mixtures of elementary densities or products thereof. We describe explicitly how to update recursively the parameters involved, yielding qualitatively similar results to those obtained with Baum--Welch filters on finite state spaces. We then provide practical algorithms for implementing the recursions, as well as approximations thereof via an informed pruning of the mixtures, and we show superior performance to particle filters both in accuracy and computational efficiency. The code for optimal filtering, smoothing and parameter inference is made available in the Julia package DualOptimalFiltering.
△ Less
Submitted 10 June, 2020; v1 submitted 5 June, 2020;
originally announced June 2020.
-
Nanosheet-stabilized emulsions: ultra-low loading segregated networks and surface energy determination of pristine few-layer 2D materials
Authors:
Sean P. Ogilvie,
Matthew J. Large,
Adam J. Cass,
Aline Amorim Graf,
Anne C. Sehnal,
Marcus A. O'Mara,
Peter J. Lynch,
Jonathan P. Salvage,
Marco Alfonso,
Philippe Poulin,
Alice A. K. King,
Alan B. Dalton
Abstract:
A framework is developed to allow emulsification to be used to fabricate functional structures from, and study the properties of, pristine layered nanosheets. Liquid-exfoliated few-layer graphene and MoS2 are demonstrated to stablize emulsions which exhibit system-scale electrical conductivity at ultra-low nanosheet volume fractions. When deposited on a substrate, the controlled drying dynamics of…
▽ More
A framework is developed to allow emulsification to be used to fabricate functional structures from, and study the properties of, pristine layered nanosheets. Liquid-exfoliated few-layer graphene and MoS2 are demonstrated to stablize emulsions which exhibit system-scale electrical conductivity at ultra-low nanosheet volume fractions. When deposited on a substrate, the controlled drying dynamics of these emulsions facilitates their application as inks where the lack of any coffee ring effect allows manual deposition of high conductivity films. In order to broaden the range of compositions and subsequently applications, an understanding of emulsion stability and orientation in terms of surface energy of the three phases is developed. Importantly, this model facilitates determination of the surface energies of the nanosheets themselves and subsequently allows design of emulsions. Finally, emulsification by surfactant-exfoliated nanosheets and emulsion inversion using basic solution are demonstrated to allow water-based processing where composition and orientation can be tailored to enable applications.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Effects of Grain Alignment Efficiency on Synthetic Dust Polarization Observations of Molecular Clouds
Authors:
Patrick K. King,
Che-Yu Chen,
Laura M. Fissel,
Zhi-Yun Li
Abstract:
It is well known that the polarized continuum emission from magnetically aligned dust grains is determined to a large extent by local magnetic field structure. However, the observed significant anticorrelation between polarization fraction and column density may be strongly affected, perhaps even dominated by variations in grain alignment efficiency with local conditions, in contrast to standard a…
▽ More
It is well known that the polarized continuum emission from magnetically aligned dust grains is determined to a large extent by local magnetic field structure. However, the observed significant anticorrelation between polarization fraction and column density may be strongly affected, perhaps even dominated by variations in grain alignment efficiency with local conditions, in contrast to standard assumptions of a spatially homogeneous grain alignment efficiency. Here we introduce a generic way to incorporate heterogeneous grain alignment into synthetic polarization observations of molecular clouds, through a simple model where the grain alignment efficiency depends on the local gas density as a power-law. We justify the model using results derived from radiative torque alignment theory. The effects of power-law heterogeneous alignment models on synthetic observations of simulated molecular clouds are presented. We find that the polarization fraction-column density correlation can be brought into agreement with observationally determined values through heterogeneous alignment, though there remains degeneracy with the relative strength of cloud-scale magnetized turbulence and the mean magnetic field orientation relative to the observer. We also find that the dispersion in polarization angles-polarization fraction correlation remains robustly correlated despite the simultaneous changes to both observables in the presence of heterogeneous alignment.
△ Less
Submitted 6 September, 2019;
originally announced September 2019.
-
A New Method to Trace Three-dimensional Magnetic Field Structure within Molecular Clouds Using Dust Polarization
Authors:
Che-Yu Chen,
Patrick K. King,
Zhi-Yun Li,
Laura M. Fissel,
Renato R. Mazzei
Abstract:
The complete three-dimensional structure of the magnetic field within molecular clouds has eluded determination despite its high value in determining controlling factors in the star formation process, as it cannot be directly probed observationally. Considering that inclination of the magnetic field relative to the plane of sky is one of the major sources of depolarization of thermal emission from…
▽ More
The complete three-dimensional structure of the magnetic field within molecular clouds has eluded determination despite its high value in determining controlling factors in the star formation process, as it cannot be directly probed observationally. Considering that inclination of the magnetic field relative to the plane of sky is one of the major sources of depolarization of thermal emission from dust in molecular clouds, we propose here a new method to estimate the inclination angle of the cloud-scale magnetic field based on the statistical properties of the observed polarization fraction. We test this method using a series of Monte Carlo experiments, and find that the method works well provided that deviations of magnetic field direction from the averaged values are small. When applied to synthetic observations of numerical simulations of star-forming clouds, our method gives fairly accurate measurements of the mean magnetic field inclination angle (within $10^\circ-25^\circ$), which can further be improved if we restrict our technique to regions of low dispersion in polarization angles ${\cal S}$. We tested our method on the BLASTPol polarimetric observations of the Vela C molecular cloud complex, which suggests that the magnetic field of Vela C has a high inclination angle ($\sim 60^\circ$), consistent with previous analyses.
△ Less
Submitted 28 February, 2019; v1 submitted 23 October, 2018;
originally announced October 2018.
-
Controlling the crystal polymorph by exploiting the time dependence of nucleation rates
Authors:
Laurie J. Little,
Alice A. K. King,
Richard P. Sear,
Joseph L. Keddie
Abstract:
Most substances can crystallise into two or more different crystal lattices, called polymorphs. Despite this, there are no systems in which we can quantitatively predict the probability of one competing polymorph forming, instead of the other. We address this problem using large scale (hundreds of events) studies of the competing nucleation of the alpha and gamma polymorphs of glycine. In situ Ram…
▽ More
Most substances can crystallise into two or more different crystal lattices, called polymorphs. Despite this, there are no systems in which we can quantitatively predict the probability of one competing polymorph forming, instead of the other. We address this problem using large scale (hundreds of events) studies of the competing nucleation of the alpha and gamma polymorphs of glycine. In situ Raman spectroscopy is used to identify the polymorph of each crystal. We find that the nucleation kinetics of the two polymorphs is very different. Nucleation of the alpha polymorph starts off slowly but accelerates, while nucleation of the gamma polymorph starts off fast but then slows. We exploit this difference to increase the purity with which we obtain the gamma polymorph by a factor of ten. The statistics of the nucleation of crystals is analogous to that of human mortality, and using a result from medical statistics we show that conventional nucleation data can say nothing about what, if any, are the correlations between competing nucleation processes. Thus we can show that, with data of our form, it is impossible to disentangle the competing nucleation processes. We also find that the growth rate and the shape of a crystal depends on when it nucleated. This is new evidence that nucleation and growth are linked.
△ Less
Submitted 11 October, 2017;
originally announced October 2017.
-
Modeling Dust Polarization Observations of Molecular Clouds through MHD Simulations
Authors:
Patrick K. King,
Laura M. Fissel,
Che-Yu Chen,
Zhi-Yun Li
Abstract:
The BLASTPol observations of Vela C have provided the most detailed characterization of the polarization fraction $p$ and dispersion in polarization angles $S$ for a molecular cloud. We compare the observed distributions of $p$ and $S$ with those obtained in synthetic observations of simulations of molecular clouds, assuming homogeneous grain alignment. We find that the orientation of the mean mag…
▽ More
The BLASTPol observations of Vela C have provided the most detailed characterization of the polarization fraction $p$ and dispersion in polarization angles $S$ for a molecular cloud. We compare the observed distributions of $p$ and $S$ with those obtained in synthetic observations of simulations of molecular clouds, assuming homogeneous grain alignment. We find that the orientation of the mean magnetic field relative to the observer has a significant effect on the $p$ and $S$ distributions. These distributions for Vela C are most consistent with synthetic observations where the mean magnetic field is close to the line-of-sight. Our results point to apparent magnetic disorder in the Vela C molecular cloud, although it can be due to either an inclination effect (i.e., observing close to the mean field direction) or significant field tangling from strong turbulence/low magnetization. The joint correlations of $p$ with column density and of $S$ with column density for the synthetic observations generally agree poorly with the Vela C joint correlations, suggesting that understanding these correlations require a more sophisticated treatment of grain alignment physics.
△ Less
Submitted 1 December, 2017; v1 submitted 25 September, 2017;
originally announced September 2017.
-
Fantastic Striations and Where to Find Them: Origin of Magnetically Aligned Striations in Interstellar Clouds
Authors:
Che-Yu Chen,
Zhi-Yun Li,
Patrick K. King,
Laura M. Fissel
Abstract:
Thin, magnetically aligned striations of relatively moderate contrast with the background are commonly observed in both atomic and molecular clouds. They are also prominent in MHD simulations with turbulent converging shocks. The simulated striations develop within a dense, stagnated sheet in the mid plane of the post-shock region where magnetically-induced converging flows collide. We show analyt…
▽ More
Thin, magnetically aligned striations of relatively moderate contrast with the background are commonly observed in both atomic and molecular clouds. They are also prominent in MHD simulations with turbulent converging shocks. The simulated striations develop within a dense, stagnated sheet in the mid plane of the post-shock region where magnetically-induced converging flows collide. We show analytically that the secondary flows are an inevitable consequence of the jump conditions of oblique MHD shocks. They produce the stagnated, sheet-like sub-layer through a secondary shock when, roughly speaking, the Alfvénic speed in the primary converging flows is supersonic, a condition that is relatively easy to satisfy in interstellar clouds. The dense sub-layer is naturally threaded by a strong magnetic field that lies close to the plane of the sub-layer. The substantial magnetic field makes the sheet highly anisotropic, which is the key to the striation formation. Specifically, perturbations of the primary inflow that vary spatially perpendicular to the magnetic field can easily roll up the sheet around the field lines without bending them, creating corrugations that appear as magnetically-aligned striations in column density maps. On the other hand, perturbations that vary spatially along the field lines curve the sub-layer and alter its orientation relative to the magnetic field locally, seeding special locations that become slanted overdense filaments and prestellar cores through enhanced mass accumulation along field lines. In our scenario, the dense sub-layer unique to magnetized oblique shocks is the birthplace for both magnetically-aligned diffuse striations and massive star-forming structures.
△ Less
Submitted 14 June, 2017;
originally announced June 2017.
-
Change of Magnetic Field$-$Gas Alignment at Gravity-Driven Alfvénic Transition in Molecular Clouds: Implications for Dust Polarization Observations
Authors:
Che-Yu Chen,
Patrick K. King,
Zhi-Yun Li
Abstract:
Diffuse striations in molecular clouds are preferentially aligned with local magnetic fields whereas dense filaments tend to be perpendicular to them. When and why this transition occurs remain uncertain. To explore the physics behind this transition, we compute the histogram of relative orientation (HRO) between the density gradient and the magnetic field in 3D MHD simulations of prestellar core…
▽ More
Diffuse striations in molecular clouds are preferentially aligned with local magnetic fields whereas dense filaments tend to be perpendicular to them. When and why this transition occurs remain uncertain. To explore the physics behind this transition, we compute the histogram of relative orientation (HRO) between the density gradient and the magnetic field in 3D MHD simulations of prestellar core formation in shock-compressed regions within GMCs. We find that, in the magnetically-dominated (sub-Alfvénic) post-shock region, the gas structure is preferentially aligned with the local magnetic field. For overdense sub-regions with super-Alfvénic gas, their elongation becomes preferentially perpendicular to the local magnetic field instead. The transition occurs when self-gravitating gas gains enough kinetic energy from the gravitational acceleration to overcome the magnetic support against the cross-field contraction, which results in a power-law increase of the field strength with density. Similar results can be drawn from HROs in projected 2D maps with integrated column densities and synthetic polarized dust emission. We quantitatively analyze our simulated polarization properties, and interpret the reduced polarization fraction at high column densities as the result of increased distortion of magnetic field directions in trans- or super-Alfvénic gas. Furthermore, we introduce measures of the inclination and tangledness of the magnetic field along the line of sight as the controlling factors of the polarization fraction. Observations of the polarization fraction and angle dispersion can therefore be utilized in studying local magnetic field morphology in star-forming regions.
△ Less
Submitted 18 July, 2016; v1 submitted 2 May, 2016;
originally announced May 2016.
-
Hierarchical modelling of species sensitivity distribution: development and application to the case of diatoms exposed to several herbicides
Authors:
Guillaume Kon Kam King,
Floriane Larras,
Sandrine Charles,
Marie Laure Delignette-Muller
Abstract:
The Species Sensitivity Distribution (SSD) is a key tool to assess the ecotoxicological threat of contaminant to biodiversity. It predicts safe concentrations for a contaminant in a community. Widely used, this approach suffers from several drawbacks: i)summarizing the sensitivity of each species by a single value entails a loss of valuable information about the other parameters characterizing the…
▽ More
The Species Sensitivity Distribution (SSD) is a key tool to assess the ecotoxicological threat of contaminant to biodiversity. It predicts safe concentrations for a contaminant in a community. Widely used, this approach suffers from several drawbacks: i)summarizing the sensitivity of each species by a single value entails a loss of valuable information about the other parameters characterizing the concentration-effect curves; ii)it does not propagate the uncertainty on the critical effect concentration into the SSD; iii)the hazardous concentration estimated with SSD only indicates the threat to biodiversity, without any insight about a global response of the community related to the measured endpoint. We revisited the current SSD approach to account for all the sources of variability and uncertainty into the prediction and to assess a global response for the community. For this purpose, we built a global hierarchical model including the concentration-response model together with the distribution law for the SSD. Working within a Bayesian framework, we were able to compute an SSD taking into account all the uncertainty from the original raw data. From model simulations, it is also possible to extract a quantitative indicator of a global response of the community to the contaminant. We applied this methodology to study the toxicity of 6 herbicides to benthic diatoms from Lake Geneva, measured from biomass reduction.
△ Less
Submitted 21 January, 2015;
originally announced January 2015.
-
MOSAIC_SSD: a new web-tool for the Species Sensitivity Distribution, allowing to include censored data by maximum likelihood
Authors:
Guillaume Kon Kam King,
Philippe Veber,
Sandrine Charles,
Marie Laure Delignette-Muller
Abstract:
Censored data are seldom taken into account in Species Sensitivity Distribution (SSD) analysis. However, they are found in virtually every dataset and sometimes represent the better part of the data. Stringent recommendations on data quality often lead to discard a lot of this meaningful data, often resulting in datasets of reduced size, which lack representativeness of any realistic community. Ho…
▽ More
Censored data are seldom taken into account in Species Sensitivity Distribution (SSD) analysis. However, they are found in virtually every dataset and sometimes represent the better part of the data. Stringent recommendations on data quality often lead to discard a lot of this meaningful data, often resulting in datasets of reduced size, which lack representativeness of any realistic community. However, it is reasonably simple to include censored data into SSD by using an extension of the standard maximum likelihood method. In this paper, we detail this approach based on the use of the R-package \emph{fitdistrplus}, dedicated to the fit of parametric probability distributions. In particular, we introduce the new web-tool MOSAIC$\_$SSD to fit an SSD on datasets containing any kind of data, censored or not. MOSAIC$\_$SSD allows predicting any Hazardous Concentration (HC) and provides in addition bootstrap confidence intervals on the prediction. In the end, taking examples from published data, we illustrate the added value of including censored data in SSD.
△ Less
Submitted 3 February, 2014; v1 submitted 22 November, 2013;
originally announced November 2013.
-
On the use of human mobility proxy for the modeling of epidemics
Authors:
Michele Tizzoni,
Paolo Bajardi,
Adeline Decuyper,
Guillaume Kon Kam King,
Christian M. Schneider,
Vincent Blondel,
Zbigniew Smoreda,
Marta C. González,
Vittoria Colizza
Abstract:
Human mobility is a key component of large-scale spatial-transmission models of infectious diseases. Correctly modeling and quantifying human mobility is critical for improving epidemic control policies, but may be hindered by incomplete data in some regions of the world. Here we explore the opportunity of using proxy data or models for individual mobility to describe commuting movements and predi…
▽ More
Human mobility is a key component of large-scale spatial-transmission models of infectious diseases. Correctly modeling and quantifying human mobility is critical for improving epidemic control policies, but may be hindered by incomplete data in some regions of the world. Here we explore the opportunity of using proxy data or models for individual mobility to describe commuting movements and predict the diffusion of infectious disease. We consider three European countries and the corresponding commuting networks at different resolution scales obtained from official census surveys, from proxy data for human mobility extracted from mobile phone call records, and from the radiation model calibrated with census data. Metapopulation models defined on the three countries and integrating the different mobility layers are compared in terms of epidemic observables. We show that commuting networks from mobile phone data well capture the empirical commuting patterns, accounting for more than 87% of the total fluxes. The distributions of commuting fluxes per link from both sources of data - mobile phones and census - are similar and highly correlated, however a systematic overestimation of commuting traffic in the mobile phone data is observed. This leads to epidemics that spread faster than on census commuting networks, however preserving the order of infection of newly infected locations. Match in the epidemic invasion pattern is sensitive to initial conditions: the radiation model shows higher accuracy with respect to mobile phone data when the seed is central in the network, while the mobile phone proxy performs better for epidemics seeded in peripheral locations. Results suggest that different proxies can be used to approximate commuting patterns across different resolution scales in spatial epidemic simulations, in light of the desired accuracy in the epidemic outcome under study.
△ Less
Submitted 27 May, 2014; v1 submitted 27 September, 2013;
originally announced September 2013.
-
The Herschel-SPIRE instrument and its in-flight performance
Authors:
M. J. Griffin,
A. Abergel,
A. Abreu,
P. A. R. Ade,
P. André,
J. -L. Augueres,
T. Babbedge,
Y. Bae,
T. Baillie,
J. -P. Baluteau,
M. J. Barlow,
G. Bendo,
D. Benielli,
J. J. Bock,
P. Bonhomme,
D. Brisbin,
C. Brockley-Blatt,
M. Caldwell,
C. Cara,
N. Castro-Rodriguez,
R. Cerulli,
P. Chanial,
S. Chen,
E. Clark,
D. L. Clements
, et al. (154 additional authors not shown)
Abstract:
The Spectral and Photometric Imaging Receiver (SPIRE), is the Herschel Space Observatory`s submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 microns, and an imaging Fourier Transform Spectrometer (FTS) which covers simultaneously its whole operating range of 194-671 microns (447-1550 GHz). The SPIRE detectors are arrays of feedhorn-c…
▽ More
The Spectral and Photometric Imaging Receiver (SPIRE), is the Herschel Space Observatory`s submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 microns, and an imaging Fourier Transform Spectrometer (FTS) which covers simultaneously its whole operating range of 194-671 microns (447-1550 GHz). The SPIRE detectors are arrays of feedhorn-coupled bolometers cooled to 0.3 K. The photometer has a field of view of 4' x 8', observed simultaneously in the three spectral bands. Its main operating mode is scan-map**, whereby the field of view is scanned across the sky to achieve full spatial sampling and to cover large areas if desired. The spectrometer has an approximately circular field of view with a diameter of 2.6'. The spectral resolution can be adjusted between 1.2 and 25 GHz by changing the stroke length of the FTS scan mirror. Its main operating mode involves a fixed telescope pointing with multiple scans of the FTS mirror to acquire spectral data. For extended source measurements, multiple position offsets are implemented by means of an internal beam steering mirror to achieve the desired spatial sampling and by rastering of the telescope pointing to map areas larger than the field of view. The SPIRE instrument consists of a cold focal plane unit located inside the Herschel cryostat and warm electronics units, located on the spacecraft Service Module, for instrument control and data handling. Science data are transmitted to Earth with no on-board data compression, and processed by automatic pipelines to produce calibrated science products. The in-flight performance of the instrument matches or exceeds predictions based on pre-launch testing and modelling: the photometer sensitivity is comparable to or slightly better than estimated pre-launch, and the spectrometer sensitivity is also better by a factor of 1.5-2.
△ Less
Submitted 27 May, 2010;
originally announced May 2010.
-
In-flight calibration of the Herschel-SPIRE instrument
Authors:
B. M. Swinyard,
P. Ade,
J-P. Baluteau,
H. Aussel,
M. J. Barlow,
G. J. Bendo,
D. Benielli,
J. Bock,
D. Brisbin,
A. Conley,
L. Conversi,
A. Dowell,
D. Dowell,
M. Ferlet,
T. Fulton,
J. Glenn,
A. Glauser,
D. Griffin,
M. Griffin,
S. Guest,
P. Imhof,
K. Isaak,
S. Jones,
K. King,
S. Leeks
, et al. (33 additional authors not shown)
Abstract:
SPIRE, the Spectral and Photometric Imaging Receiver, is the Herschel Space Observatory's submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 μm, and an imaging Fourier transform spectrometer (FTS) covering 194-671 μm (447-1550 GHz). In this paper we describe the initial approach taken to the absolute calibration of the SPIRE instrument…
▽ More
SPIRE, the Spectral and Photometric Imaging Receiver, is the Herschel Space Observatory's submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 μm, and an imaging Fourier transform spectrometer (FTS) covering 194-671 μm (447-1550 GHz). In this paper we describe the initial approach taken to the absolute calibration of the SPIRE instrument using a combination of the emission from the Herschel telescope itself and the modelled continuum emission from solar system objects and other astronomical targets. We present the photometric, spectroscopic and spatial accuracy that is obtainable in data processed through the "standard" pipelines. The overall photometric accuracy at this stage of the mission is estimated as 15% for the photometer and between 15 and 50% for the spectrometer. However, there remain issues with the photometric accuracy of the spectra of low flux sources in the longest wavelength part of the SPIRE spectrometer band. The spectrometer wavelength accuracy is determined to be better than 1/10th of the line FWHM. The astrometric accuracy in SPIRE maps is found to be 2 arcsec when the latest calibration data are used. The photometric calibration of the SPIRE instrument is currently determined by a combination of uncertainties in the model spectra of the astronomical standards and the data processing methods employed for map and spectrum calibration. Improvements in processing techniques and a better understanding of the instrument performance will lead to the final calibration accuracy of SPIRE being determined only by uncertainties in the models of astronomical standards.
△ Less
Submitted 27 May, 2010;
originally announced May 2010.
-
Summary of SLAC'S SEY Measurement On Flat Accelerator Wall Materials
Authors:
F. Le Pimpec,
R. E. Kirby,
F. K. King,
M. Pivi
Abstract:
The electron cloud effect (ECE) causes beam instabilities in accelerator structures with intense positively charged bunched beams. Reduction of the secondary electron yield (SEY) of the beam pipe inner wall is effective in controlling cloud formation. We summarize SEY results obtained from flat TiN, TiZrV and Al surfaces carried out in a laboratory environment. SEY was measured after thermal con…
▽ More
The electron cloud effect (ECE) causes beam instabilities in accelerator structures with intense positively charged bunched beams. Reduction of the secondary electron yield (SEY) of the beam pipe inner wall is effective in controlling cloud formation. We summarize SEY results obtained from flat TiN, TiZrV and Al surfaces carried out in a laboratory environment. SEY was measured after thermal conditioning, as well as after low energy, less than 300 eV, particle exposure.
△ Less
Submitted 9 November, 2007;
originally announced November 2007.
-
Search for Small Trans-Neptunian Objects by the TAOS Project
Authors:
W. P. Chen,
C. Alcock,
T. Axelrod,
F. B. Bianco,
Y. I. Byun,
Y. H. Chang,
K. H. Cook,
R. Dave,
J. Giammarco,
D. W. Kim,
S. K. King,
T. Lee,
M. Lehner,
C. C. Lin,
H. C. Lin,
J. J. Lissauer,
S. Marshall,
N. Meinshausen,
S. Mondal,
I. de Pater,
R. Porrata,
J. Rice,
M. E. Schwamb,
A. Wang,
S. Y. Wang
, et al. (2 additional authors not shown)
Abstract:
The Taiwan-America Occultation Survey (TAOS) aims to determine the number of small icy bodies in the outer reach of the Solar System by means of stellar occultation. An array of 4 robotic small (D=0.5 m), wide-field (f/1.9) telescopes have been installed at Lulin Observatory in Taiwan to simultaneously monitor some thousand of stars for such rare occultation events. Because a typical occultation…
▽ More
The Taiwan-America Occultation Survey (TAOS) aims to determine the number of small icy bodies in the outer reach of the Solar System by means of stellar occultation. An array of 4 robotic small (D=0.5 m), wide-field (f/1.9) telescopes have been installed at Lulin Observatory in Taiwan to simultaneously monitor some thousand of stars for such rare occultation events. Because a typical occultation event by a TNO a few km across will last for only a fraction of a second, fast photometry is necessary. A special CCD readout scheme has been devised to allow for stellar photometry taken a few times per second. Effective analysis pipelines have been developed to process stellar light curves and to correlate any possible flux changes among all telescopes. A few billion photometric measurements have been collected since the routine survey began in early 2005. Our preliminary result of a very low detection rate suggests a deficit of small TNOs down to a few km size, consistent with the extrapolation of some recent studies of larger (30--100 km) TNOs.
△ Less
Submitted 16 November, 2006;
originally announced November 2006.
-
The Effect of Gas Ion Bombardment on the Secondary Electron Yield of TiN, TiCN and TiZrV Coatings For Suppressing Collective Electron Effects in Storage Rings
Authors:
F. Le Pimpec,
R. E. Kirby,
F. K. King,
M. Pivi
Abstract:
In many accelerator storage rings running positively charged beams, ionization of residual gas and secondary electron emission (SEE) in the beam pipe will give rise to an electron cloud which can cause beam blow-up or loss of the circulating beam. A preventative measure that suppresses electron cloud formation is to ensure that the vacuum wall has a low secondary emission yield (SEY). The SEY of…
▽ More
In many accelerator storage rings running positively charged beams, ionization of residual gas and secondary electron emission (SEE) in the beam pipe will give rise to an electron cloud which can cause beam blow-up or loss of the circulating beam. A preventative measure that suppresses electron cloud formation is to ensure that the vacuum wall has a low secondary emission yield (SEY). The SEY of thin films of TiN, sputter deposited Non-Evaporable Getters and a novel TiCN alloy were measured under a variety of conditions, including the effect of re-contamination from residual gas.
△ Less
Submitted 22 March, 2006; v1 submitted 26 January, 2006;
originally announced January 2006.
-
A Spectroscopic Survey of a Sample of Active M Dwarfs
Authors:
Stefan W. Mochnacki,
Michael D. Gladders,
James R. Thomson,
Wenxian Lu,
Paula Ehlers,
Metin Guler,
Asif Hussain,
Quincy Kameda,
Karen King,
Patricia Mitchell,
Jason Rowe,
Peter Schindler,
Heather Scott
Abstract:
A moderate resolution spectroscopic survey of Fleming's sample of 54 X-ray selected M dwarfs with photometric distances less than 25 pc is presented. Radial and rotation velocities have been measured by fits to the H-alpha profiles. Radial velocities have been measured by cross correlation. Artificial broadening of an observed spectrum has produced a relationship between H-alpha FWHM and rotatio…
▽ More
A moderate resolution spectroscopic survey of Fleming's sample of 54 X-ray selected M dwarfs with photometric distances less than 25 pc is presented. Radial and rotation velocities have been measured by fits to the H-alpha profiles. Radial velocities have been measured by cross correlation. Artificial broadening of an observed spectrum has produced a relationship between H-alpha FWHM and rotation speed, which we use to infer rotation speeds for the entire sample by measurement of the H-alpha emission line. We find 3 ultra-fast rotators (UFRs, vsini > 100km/s), and 8 stars with 30 < vsini < 100 km/s. The UFRs have variable emission. Cross-correlation velocities measured for ultra-fast rotators (UFRs) are shown to depend on rotation speed and the filtering used. The radial velocity dispersion of the sample is 17 km/s. A new double emission line spectroscopic binary with a period of 3.55 days has been discovered, and another known one is in the sample. Three other objects are suspected spectroscopic binaries, and at least six are visual doubles. The only star in the sample observed to have significant lithium is a known TW Hya Association member, TWA 8A. These results show that there are a number of young (< 10^8 yr) and very young (< 10^7 yr) low mass stars in the immediate solar neighbourhood. The H-alpha activity strength does not depend on rotation speed. Our fast rotators are less luminous than similarly fast rotators in the Pleiades. They are either younger than the Pleiades, or gained angular momentum in a different way.
△ Less
Submitted 18 July, 2002;
originally announced July 2002.