-
Isotope effects in supercooled H$_2$O and D$_2$O and a corresponding-states-like rescaling of the temperature and pressure
Authors:
Greg A. Kimmel
Abstract:
Water shows anomalous properties that are enhanced upon supercooling. The unusual behavior is observed in both H$_2$O and D$_2$O, however with different temperature dependences for the two isotopes. It is often noted that comparing the properties of the isotopes at two different temperatures (i.e., a temperature shift) approximately accounts for many of the observations with a temperature shift of…
▽ More
Water shows anomalous properties that are enhanced upon supercooling. The unusual behavior is observed in both H$_2$O and D$_2$O, however with different temperature dependences for the two isotopes. It is often noted that comparing the properties of the isotopes at two different temperatures (i.e., a temperature shift) approximately accounts for many of the observations with a temperature shift of 7.2 K in the temperature of maximum density being the most well-known example. However, the physical justification for such a shift is unclear. Motivated by recent work demonstrating a corresponding-states-like rescaling for water properties in three classical water models that all exhibit a liquid-liquid transition and critical point (B. Uralcan, et al., J. Chem. Phys. 150, 064503 (2019)), the applicability of this approach for reconciling the differences in temperature- and pressure-dependent thermodynamic properties of H$_2$O and D$_2$O is investigated here. Utilizing previously published data and equations-of-state for H$_2$O and D$_2$O, we show that the available data and models for these isotopes are consistent with such a low temperature correspondence. These observations provide support for the hypothesis that a liquid-liquid critical point, which is predicted to occur at low temperatures and high pressures, is the origin of many of water's anomalies.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Robust, Occlusion-aware Pose Estimation for Objects Grasped by Adaptive Hands
Authors:
Bowen Wen,
Chaitanya Mitash,
Sruthi Soorian,
Andrew Kimmel,
Avishai Sintov,
Kostas E. Bekris
Abstract:
Many manipulation tasks, such as placement or within-hand manipulation, require the object's pose relative to a robot hand. The task is difficult when the hand significantly occludes the object. It is especially hard for adaptive hands, for which it is not easy to detect the finger's configuration. In addition, RGB-only approaches face issues with texture-less objects or when the hand and the obje…
▽ More
Many manipulation tasks, such as placement or within-hand manipulation, require the object's pose relative to a robot hand. The task is difficult when the hand significantly occludes the object. It is especially hard for adaptive hands, for which it is not easy to detect the finger's configuration. In addition, RGB-only approaches face issues with texture-less objects or when the hand and the object look similar. This paper presents a depth-based framework, which aims for robust pose estimation and short response times. The approach detects the adaptive hand's state via efficient parallel search given the highest overlap between the hand's model and the point cloud. The hand's point cloud is pruned and robust global registration is performed to generate object pose hypotheses, which are clustered. False hypotheses are pruned via physical reasoning. The remaining poses' quality is evaluated given agreement with observed data. Extensive evaluation on synthetic and real data demonstrates the accuracy and computational efficiency of the framework when applied on challenging, highly-occluded scenarios for different object types. An ablation study identifies how the framework's components help in performance. This work also provides a dataset for in-hand 6D object pose estimation. Code and dataset are available at: https://github.com/wenbowen123/icra20-hand-object-pose
△ Less
Submitted 7 March, 2020;
originally announced March 2020.
-
Reversible structural transformations in supercooled water from 135 to 245 K
Authors:
Loni Kringle,
Wyatt A. Thornley,
Bruce D. Kay,
Greg A. Kimmel
Abstract:
Water has many anomalous properties compared to "simple" liquids, and these anomalies are typically enhanced in supercooled water. While numerous models have been proposed, including the liquid-liquid critical point, the singularity-free scenario, and the stability limit conjecture, a molecular-level understanding remains elusive.The main difficulty in determining which, if any, of these models is…
▽ More
Water has many anomalous properties compared to "simple" liquids, and these anomalies are typically enhanced in supercooled water. While numerous models have been proposed, including the liquid-liquid critical point, the singularity-free scenario, and the stability limit conjecture, a molecular-level understanding remains elusive.The main difficulty in determining which, if any, of these models is correct is the limited amount of data in the relevant temperature and pressure ranges. For water at ambient pressures, which is the focus of this work, data is largely missing from 160 - 232 K due to rapid crystallization. Whether rapid crystallization is just an experimental obstacle, or a fundamental problem signaling the inability of water to thermally equilibrate prior to crystallization is also a major unanswered question. Here, we investigate the structural transformations of transiently-heated, supercooled water with nanosecond time resolution using infrared vibrational spectroscopy. The experiments demonstrate three key results. First, water's structure relaxes from its initial configuration to a "steady-state" configuration prior to the onset of crystallization over a wide temperature range. Second, water's steady-state structure can be reproduced by a linear combination of two, temperature-independent structures that correspond to a "high-temperature liquid" and a "low-temperature liquid." Third, the observed structural changes are reversible over the full temperature range. Taken together, these results show that supercooled water can equilibrate prior to crystallization for temperatures from the homogeneous nucleation temperature down to the glass transition temperature. Second, the results provide support for the hypothesis that supercooled water can be described as a mixture of two, structurally-distinct, interconvertible liquids from 135 K to 245 K.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Interfacial phenomena in nanocapacitors with multifunctional oxides
Authors:
Anna V. Kimmel
Abstract:
The analysis of the structure, chemical stability, electronic and ferroelectric properties of the interfaces between Pt(001) and PbZrTiO$_3$(001) (PZT) have been performed with $ab$ $initio$ methods. We show that the chemical environment plays a critical role in determining the interfacial reconstruction and charge redistribution at the metal/oxide interfaces. We demonstrate that the difference in…
▽ More
The analysis of the structure, chemical stability, electronic and ferroelectric properties of the interfaces between Pt(001) and PbZrTiO$_3$(001) (PZT) have been performed with $ab$ $initio$ methods. We show that the chemical environment plays a critical role in determining the interfacial reconstruction and charge redistribution at the metal/oxide interfaces. We demonstrate that the difference in interfacial bonds formed at the Pt/PZT interfaces with (TiZr)O$_2$ - and PbO- termination of PZT essentially defines the effectiveness of the screening, and ease of polarisation switching in PZT-based capacitors. The imperfect screening in Pt/PZT/Pt capacitors is caused by strong interfacial bonds formed at the interface with (TiZr)O$_2$-terminated film, which is accompanied by the suppressed polarisation of PZT film. In contrast, the capacitors with PbO-terminated PZT show a negligible depolarising field and high polarisation, which is the consequence of weak bonds formed at this type of interfaces. The latter also causes a higher switching barrier than that in the former system.
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
Giant electrocaloric effect at the antiferroelectric-to-ferroelectric phase boundary in PbZrTiO$_3$
Authors:
A. V. Kimmel,
O. T. Gindele,
D. M. Duffy,
R. E. Cohen
Abstract:
Molecular dynamics simulations predict a giant electrocaloric effect at the ferroelectric-antiferroelectric phase boundary in PZT (PbTiO$_3$-PbZrO$_3$). These large-scale simulations also give insights into the atomistic mechanisms of the electrocaloric effect in PZT materials. Studying a range of ferroelectric (FE) and antiferroelectric (AFE) PZT materials we found positive electrocaloric effect…
▽ More
Molecular dynamics simulations predict a giant electrocaloric effect at the ferroelectric-antiferroelectric phase boundary in PZT (PbTiO$_3$-PbZrO$_3$). These large-scale simulations also give insights into the atomistic mechanisms of the electrocaloric effect in PZT materials. Studying a range of ferroelectric (FE) and antiferroelectric (AFE) PZT materials we found positive electrocaloric effect in FE composites, but AFE ones exhibit a positive-to-negative crossover. At the AFE-FE phase boundary we find complex domain patterns. We demonstrate that the origin of giant electrocaloric change of temperature is related to the easy structural response of the dipolar system to external stimuli the transition region.
△ Less
Submitted 25 June, 2019; v1 submitted 3 April, 2019;
originally announced April 2019.
-
Fast, Anytime Motion Planning for Prehensile Manipulation in Clutter
Authors:
Andrew Kimmel,
Rahul Shome,
Zakary Littlefield,
Kostas Bekris
Abstract:
Many methods have been developed for planning the motion of robotic arms for picking and placing, ranging from local optimization to global search techniques, which are effective for sparsely placed objects. Dense clutter, however, still adversely affects the success rate, computation times, and quality of solutions in many real-world setups. The current work integrates tools from existing methodo…
▽ More
Many methods have been developed for planning the motion of robotic arms for picking and placing, ranging from local optimization to global search techniques, which are effective for sparsely placed objects. Dense clutter, however, still adversely affects the success rate, computation times, and quality of solutions in many real-world setups. The current work integrates tools from existing methodologies and proposes a framework that achieves high success ratio in clutter with anytime performance. The idea is to first explore the lower dimensional end effector's task space efficiently by ignoring the arm, and build a discrete approximation of a navigation function, which guides the end effector towards the set of available grasps or object placements. This is performed online, without prior knowledge of the scene. Then, an informed sampling-based planner for the entire arm uses Jacobian-based steering to reach promising end effector poses given the task space guidance. While informed, the method is also comprehensive and allows the exploration of alternative paths over time if the task space guidance does not lead to a solution. This paper evaluates the proposed method against alternatives in picking or placing tasks among varying amounts of clutter for a variety of robotic manipulators with different end-effectors. The results suggest that the method reliably provides higher quality solution paths quicker, with a higher success rate relative to alternatives.
△ Less
Submitted 11 February, 2019; v1 submitted 19 June, 2018;
originally announced June 2018.
-
Fast Model Identification via Physics Engines for Data-Efficient Policy Search
Authors:
Shaojun Zhu,
Andrew Kimmel,
Kostas E. Bekris,
Abdeslam Boularias
Abstract:
This paper presents a method for identifying mechanical parameters of robots or objects, such as their mass and friction coefficients. Key features are the use of off-the-shelf physics engines and the adaptation of a Bayesian optimization technique towards minimizing the number of real-world experiments needed for model-based reinforcement learning. The proposed framework reproduces in a physics e…
▽ More
This paper presents a method for identifying mechanical parameters of robots or objects, such as their mass and friction coefficients. Key features are the use of off-the-shelf physics engines and the adaptation of a Bayesian optimization technique towards minimizing the number of real-world experiments needed for model-based reinforcement learning. The proposed framework reproduces in a physics engine experiments performed on a real robot and optimizes the model's mechanical parameters so as to match real-world trajectories. The optimized model is then used for learning a policy in simulation, before real-world deployment. It is well understood, however, that it is hard to exactly reproduce real trajectories in simulation. Moreover, a near-optimal policy can be frequently found with an imperfect model. Therefore, this work proposes a strategy for identifying a model that is just good enough to approximate the value of a locally optimal policy with a certain confidence, instead of wasting effort on identifying the most accurate model. Evaluations, performed both in simulation and on a real robotic manipulation task, indicate that the proposed strategy results in an overall time-efficient, integrated model identification and learning solution, which significantly improves the data-efficiency of existing policy search algorithms.
△ Less
Submitted 13 June, 2018; v1 submitted 24 October, 2017;
originally announced October 2017.
-
Improving the Functional Control of Aged Ferroelectrics using Insights from Atomistic Modelling
Authors:
J. B. J. Chapman,
R. E. Cohen,
A. V. Kimmel,
D. M. Duffy
Abstract:
We provide a fundamental insight into the microscopic mechanisms of the ageing processes. Using large scale molecular dynamics simulations of the prototypical ferroelectric material PbTiO3, we demonstrate that the experimentally observed ageing phenomena can be reproduced from intrinsic interactions of defect-dipoles related to dopant-vacancy associates, even in the absence of extrinsic effects. W…
▽ More
We provide a fundamental insight into the microscopic mechanisms of the ageing processes. Using large scale molecular dynamics simulations of the prototypical ferroelectric material PbTiO3, we demonstrate that the experimentally observed ageing phenomena can be reproduced from intrinsic interactions of defect-dipoles related to dopant-vacancy associates, even in the absence of extrinsic effects. We show that variation of the dopant concentration modifies the material's hysteretic response. We identify a universal method to reduce loss and tune the electromechanical properties of inexpensive ceramics for efficient technologies.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Information-theoretic Model Identification and Policy Search using Physics Engines with Application to Robotic Manipulation
Authors:
Shaojun Zhu,
Andrew Kimmel,
Abdeslam Boularias
Abstract:
We consider the problem of a robot learning the mechanical properties of objects through physical interaction with the object, and introduce a practical, data-efficient approach for identifying the motion models of these objects. The proposed method utilizes a physics engine, where the robot seeks to identify the inertial and friction parameters of the object by simulating its motion under differe…
▽ More
We consider the problem of a robot learning the mechanical properties of objects through physical interaction with the object, and introduce a practical, data-efficient approach for identifying the motion models of these objects. The proposed method utilizes a physics engine, where the robot seeks to identify the inertial and friction parameters of the object by simulating its motion under different values of the parameters and identifying those that result in a simulation which matches the observed real motions. The problem is solved in a Bayesian optimization framework. The same framework is used for both identifying the model of an object online and searching for a policy that would minimize a given cost function according to the identified model. Experimental results both in simulation and using a real robot indicate that the proposed method outperforms state-of-the-art model-free reinforcement learning approaches.
△ Less
Submitted 22 March, 2017;
originally announced March 2017.
-
Interface-Induced Phenomena in Magnetism
Authors:
Frances Hellman,
Axel Hoffmann,
Yaroslav Tserkovnyak,
Geoffrey Beach,
Eric Fullerton,
Chris Leighton,
Allan MacDonald,
Dan Ralph,
Dario Arena,
Hermann Durr,
Peter Fischer,
Julie Grollier,
Joseph Heremans,
Tomas Jungwirth,
Alexey Kimmel,
Bert Koopmans,
Ilya Krivorotov,
Steven May,
Amanda Petford-Long,
James Rondinelli,
Nitin Samarth,
Ivan Schuller,
Andrei Slavin,
Mark Stiles,
Oleg Tchernyshyov
, et al. (2 additional authors not shown)
Abstract:
This article reviews static and dynamic interfacial effects in magnetism, focusing on interfacially-driven magnetic effects and phenomena associated with spin-orbit coupling and intrinsic symmetry breaking at interfaces. It provides a historical background and literature survey, but focuses on recent progress, identifying the most exciting new scientific results and pointing to promising future re…
▽ More
This article reviews static and dynamic interfacial effects in magnetism, focusing on interfacially-driven magnetic effects and phenomena associated with spin-orbit coupling and intrinsic symmetry breaking at interfaces. It provides a historical background and literature survey, but focuses on recent progress, identifying the most exciting new scientific results and pointing to promising future research directions. It starts with an introduction and overview of how basic magnetic properties are affected by interfaces, then turns to a discussion of charge and spin transport through and near interfaces and how these can be used to control the properties of the magnetic layer. Important concepts include spin accumulation, spin currents, spin transfer torque, and spin pum**. An overview is provided to the current state of knowledge and existing review literature on interfacial effects such as exchange bias, exchange spring magnets, spin Hall effect, oxide heterostructures, and topological insulators. The article highlights recent discoveries of interface-induced magnetism and non-collinear spin textures, non-linear dynamics including spin torque transfer and magnetization reversal induced by interfaces, and interfacial effects in ultrafast magnetization processes.
△ Less
Submitted 23 June, 2017; v1 submitted 1 July, 2016;
originally announced July 2016.
-
Similar Part Rearrangement With Pebble Graphs
Authors:
Athanasios Krontiris,
Rahul Shome,
Andrew Dobson,
Andrew Kimmel,
Issac Yochelson,
Kostas Bekris
Abstract:
This work proposes a method for effectively computing manipulation paths to rearrange similar objects in a cluttered space. The solution can be used to place similar products in a factory floor in a desirable arrangement or for retrieving a particular object from a shelf blocked by similarly sized objects. These are challenging problems as they involve combinatorially large, continuous configurati…
▽ More
This work proposes a method for effectively computing manipulation paths to rearrange similar objects in a cluttered space. The solution can be used to place similar products in a factory floor in a desirable arrangement or for retrieving a particular object from a shelf blocked by similarly sized objects. These are challenging problems as they involve combinatorially large, continuous configuration spaces due to the presence of multiple moving bodies and kinematically complex manipulators. This work leverages ideas from algorithmic theory, multi-robot motion planning and manipulation planning to propose appropriate graphical representations for this challenge. These representations allow to quickly reason whether manipulation paths allow the transition between entire sets of objects arrangements without having to explicitly enumerate the path for each pair of arrangements. The proposed method also allows to take advantage of precomputation given a manipulation roadmap for transferring a single object in the same cluttered space. The resulting approach is evaluated in simulation for a realistic model of a Baxter robot and executed in open-loop on the real system, showing that the approach solves complex instances and is promising in terms of scalability and success ratio.
△ Less
Submitted 25 April, 2014;
originally announced April 2014.
-
Molecular dynamic investigations of liquid nickels structural properties
Authors:
A. Kimmel,
V. Ladyanov,
I. Gusenkov
Abstract:
The effective pair potentials of liquid nickel have been derived by means of the inverse self-consistent method from the experimental diffraction data. The potentials provide highly accurate coincidence of experimental and simulated structural properties. The statistical analysis of Voronoi polyhedral and Delaunau simplices has shown that in the vicinity of the melting point in the structure of…
▽ More
The effective pair potentials of liquid nickel have been derived by means of the inverse self-consistent method from the experimental diffraction data. The potentials provide highly accurate coincidence of experimental and simulated structural properties. The statistical analysis of Voronoi polyhedral and Delaunau simplices has shown that in the vicinity of the melting point in the structure of liquid nickel there are relatively stable spatial polytetrahedral formations with local 5-folder symmetry. With temperature rise such formations evolve to isolate and compact ones with preserving of the local five-folder symmetry.
△ Less
Submitted 13 April, 2005;
originally announced April 2005.
-
Temperature evolution of the structure of liquid 3d transition metals: MD study
Authors:
A. Kimmel,
I. Gusenkov
Abstract:
The effective pair potentials of liquid 3d transition metals have been derived from the experimental diffraction data by means of the inverse self-consistent method. The obtained potentials provide highly accurate coincidence of the simulated by means of the molecular dynamics method and the experimental structural factors at the range of temperatures. The statistical analysis of Voronoy polyhed…
▽ More
The effective pair potentials of liquid 3d transition metals have been derived from the experimental diffraction data by means of the inverse self-consistent method. The obtained potentials provide highly accurate coincidence of the simulated by means of the molecular dynamics method and the experimental structural factors at the range of temperatures. The statistical analysis of Voronoy polyhedra of the simulated systems has indicated the presence of the temperature range of inhomogeneity, within which the metallic liquids contain several competitive types of the local order, and out of them structure of liquid becomes homogeneous.
△ Less
Submitted 10 August, 2005; v1 submitted 28 December, 2004;
originally announced December 2004.
-
Many Body Theory of Charge Transfer in Hyperthermal Atomic Scattering
Authors:
J. B. Marston,
D. R. Andersson,
E. R. Behringer,
B. H. Cooper,
C. A. DiRubio,
G. A. Kimmel,
C. Richardson
Abstract:
We use the Newns-Anderson Hamiltonian to describe many-body electronic processes that occur when hyperthermal alkali atoms scatter off metallic surfaces. Following Brako and Newns, we expand the electronic many-body wavefunction in the number of particle-hole pairs (we keep terms up to and including a single particle-hole pair). We extend their earlier work by including level crossings, excited…
▽ More
We use the Newns-Anderson Hamiltonian to describe many-body electronic processes that occur when hyperthermal alkali atoms scatter off metallic surfaces. Following Brako and Newns, we expand the electronic many-body wavefunction in the number of particle-hole pairs (we keep terms up to and including a single particle-hole pair). We extend their earlier work by including level crossings, excited neutrals and negative ions. The full set of equations of motion are integrated numerically, without further approximations, to obtain the many-body amplitudes as a function of time. The velocity and work-function dependence of final state quantities such as the distribution of ion charges and excited atomic occupancies are compared with experiment. In particular, experiments that scatter alkali ions off clean Cu(001) surfaces in the energy range 5 to 1600 eV constrain the theory quantitatively. The neutralization probability of Na$^+$ ions shows a minimum at intermediate velocity in agreement with the theory. This behavior contrasts with that of K$^+$, which shows ... (7 figures, not included. Figure requests: [email protected])
△ Less
Submitted 17 October, 1992;
originally announced October 1992.