Showing 1–30 of 30 results for author: Kim, H w

Semi-Supervised Domain Adaptation Using Target-Oriented Domain Augmentation for 3D Object Detection

Authors: Yecheol Kim, Junho Lee, Changsoo Park, Hyoung won Kim, Inho Lim, Christopher Chang, Jun Won Choi

Abstract: 3D object detection is crucial for applications like autonomous driving and robotics. However, in real-world environments, variations in sensor data distribution due to sensor upgrades, weather changes, and geographic differences can adversely affect detection performance. Semi-Supervised Domain Adaptation (SSDA) aims to mitigate these challenges by transferring knowledge from a source domain, abu… ▽ More 3D object detection is crucial for applications like autonomous driving and robotics. However, in real-world environments, variations in sensor data distribution due to sensor upgrades, weather changes, and geographic differences can adversely affect detection performance. Semi-Supervised Domain Adaptation (SSDA) aims to mitigate these challenges by transferring knowledge from a source domain, abundant in labeled data, to a target domain where labels are scarce. This paper presents a new SSDA method referred to as Target-Oriented Domain Augmentation (TODA) specifically tailored for LiDAR-based 3D object detection. TODA efficiently utilizes all available data, including labeled data in the source domain, and both labeled data and unlabeled data in the target domain to enhance domain adaptation performance. TODA consists of two stages: TargetMix and AdvMix. TargetMix employs mixing augmentation accounting for LiDAR sensor characteristics to facilitate feature alignment between the source-domain and target-domain. AdvMix applies point-wise adversarial augmentation with mixing augmentation, which perturbs the unlabeled data to align the features within both labeled and unlabeled data in the target domain. Our experiments conducted on the challenging domain adaptation tasks demonstrate that TODA outperforms existing domain adaptation techniques designed for 3D object detection by significant margins. The code is available at: https://github.com/rasd3/TODA. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: Accepted to IEEE Transactions on Intelligent Vehicles (T-IV). The code is available at: https://github.com/rasd3/TODA

OGLE-2019-BLG-0825: Constraints on the Source System and Effect on Binary-lens Parameters arising from a Five Day Xallarap Effect in a Candidate Planetary Microlensing Event

Authors: Yuki K. Satoh, Naoki Koshimoto, David P. Bennett, Takahiro Sumi, Nicholas J. Rattenbury, Daisuke Suzuki, Shota Miyazaki, Ian A. Bond, Andrzej Udalski, Andrew Gould, Valerio Bozza, Martin Dominik, Yuki Hirao, Iona Kondo, Rintaro Kirikawa, Ryusei Hamada, Fumio Abe, Richard Barry, Aparna Bhattacharya, Hirosane Fujii, Akihiko Fukui, Katsuki Fujita, Tomoya Ikeno, Stela Ishitani Silva, Yoshitaka Itow , et al. (64 additional authors not shown)

Abstract: We present an analysis of microlensing event OGLE-2019-BLG-0825. This event was identified as a planetary candidate by preliminary modeling. We find that significant residuals from the best-fit static binary-lens model exist and a xallarap effect can fit the residuals very well and significantly improves $χ^2$ values. On the other hand, by including the xallarap effect in our models, we find that… ▽ More We present an analysis of microlensing event OGLE-2019-BLG-0825. This event was identified as a planetary candidate by preliminary modeling. We find that significant residuals from the best-fit static binary-lens model exist and a xallarap effect can fit the residuals very well and significantly improves $χ^2$ values. On the other hand, by including the xallarap effect in our models, we find that binary-lens parameters like mass-ratio, $q$, and separation, $s$, cannot be constrained well. However, we also find that the parameters for the source system like the orbital period and semi major axis are consistent between all the models we analyzed. We therefore constrain the properties of the source system better than the properties of the lens system. The source system comprises a G-type main-sequence star orbited by a brown dwarf with a period of $P\sim5$ days. This analysis is the first to demonstrate that the xallarap effect does affect binary-lens parameters in planetary events. It would not be common for the presence or absence of the xallarap effect to affect lens parameters in events with long orbital periods of the source system or events with transits to caustics, but in other cases, such as this event, the xallarap effect can affect binary-lens parameters. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Comments: 19 pages, 7 figures, 6 tables. Accepted by AJ

Designing Pr-based Advanced Photoluminescent Materials using Machine Learning and Density Functional Theory

Authors: Upendra Kumar, Hyeon Woo Kim, Sobhit Singh, Hyunseok Ko, Sung Beom Cho

Abstract: This work presents a machine learning approach to predict novel perovskite oxide materials in the Pr-Al-O and Pr-Sc-O compound families with the potential for photoluminescence applications. The predicted materials exhibit a large bandgap and high Debye temperature, and have remained unexplored thus far. The predicted compounds (Pr$_3$AlO$_6$, Pr$_4$Al$_2$O$_9$, Pr$_3$ScO$_6$ and Pr$_3$Sc$_5$O… ▽ More This work presents a machine learning approach to predict novel perovskite oxide materials in the Pr-Al-O and Pr-Sc-O compound families with the potential for photoluminescence applications. The predicted materials exhibit a large bandgap and high Debye temperature, and have remained unexplored thus far. The predicted compounds (Pr$_3$AlO$_6$, Pr$_4$Al$_2$O$_9$, Pr$_3$ScO$_6$ and Pr$_3$Sc$_5$O$_{12}$) are screened using machine learning approach, which are then confirmed by density functional theory calculations. The study includes the calculation of the bandgap and density of states to determine electronic properties, and the optical absorption and emission spectra to determine optical properties. Mechanical stability of the predicted compounds, as demonstrated by satisfying the Born-Huang criterion. By combining machine learning and density functional theory, this work offers a more efficient and comprehensive approach to materials discovery and design. △ Less

Submitted 20 June, 2023; originally announced June 2023.

OGLE-2016-BLG-1093Lb: A Sub-Jupiter-mass Spitzer Planet Located in Galactic Bulge

Authors: In-Gu Shin, Jennifer C. Yee, Kyu-Ha Hwang, Andrew Gould, Andrzej Udalski, Ian A. Bond, Michael D. Albrow, Sun-Ju Chung, Cheongho Han, Youn Kil Jung, Hyoun Woo Kim, Yoon-Hyun Ryu, Yossi Shvartzvald, Weicheng Zang, Sang-Mok Cha, Dong-** Kim, Seung-Lee Kim, Chung-Uk Lee, Dong-Joo Lee, Yongseok Lee, Byeong-Gon Park, Richard W. Pogge, Przemek Mróz, Michał K. Szymański, Jan Skowron , et al. (39 additional authors not shown)

Abstract: OGLE-2016-BLG-1093 is a planetary microlensing event that is part of the statistical $Spitzer$ microlens parallax sample. The precise measurement of the microlens parallax effect for this event, combined with the measurement of finite source effects, leads to a direct measurement of the lens masses and system distance: $M_{\rm host} = 0.38$--$0.57\, M_{\odot}$, $m_p = 0.59$--$0.87\, M_{\rm Jup}$,… ▽ More OGLE-2016-BLG-1093 is a planetary microlensing event that is part of the statistical $Spitzer$ microlens parallax sample. The precise measurement of the microlens parallax effect for this event, combined with the measurement of finite source effects, leads to a direct measurement of the lens masses and system distance: $M_{\rm host} = 0.38$--$0.57\, M_{\odot}$, $m_p = 0.59$--$0.87\, M_{\rm Jup}$, and the system is located at the Galactic bulge ($D_L \sim 8.1$ kpc). Because this was a high-magnification event, we are also able to empirically show that the "cheap-space parallax" concept Gould & Yee (2012) produces well-constrained (and consistent) results for $|π_{\rm E}|$. This demonstrates that this concept can be extended to many two-body lenses. Finally, we briefly explore systematics in the $Spitzer$ light curve in this event and show that their potential impact is strongly mitigated by the color-constraint. △ Less

Submitted 12 January, 2022; originally announced January 2022.

Comments: 9 Figures, 3 Tables, submitted to the AAS journal

Reshaped Weyl fermionic dispersions driven by Coulomb interactions in MoTe2

Authors: Seoung-Hun Kang, Sangjun Jeon, Hyun-Jung Kim, Wonhee Ko, Suyeon Cho, Se Hwang Kang, Sung Wng Kim, Heejun Yang, Hyo Won Kim, Young-Woo Son

Abstract: We report the direct evidence of impacts of the Coulomb interaction in a prototypical Weyl semimetal, MoTe2, that alter its bare bands in a wide range of energy and momentum. Our quasiparticle interference patterns measured using scanning tunneling microscopy are shown to match the joint density of states of quasiparticle energy bands including momentum-dependent self-energy corrections, while ele… ▽ More We report the direct evidence of impacts of the Coulomb interaction in a prototypical Weyl semimetal, MoTe2, that alter its bare bands in a wide range of energy and momentum. Our quasiparticle interference patterns measured using scanning tunneling microscopy are shown to match the joint density of states of quasiparticle energy bands including momentum-dependent self-energy corrections, while electronic energy bands based on the other simpler local approximations of the Coulomb interaction fail to explain neither the correct number of quasiparticle pockets nor shape of their dispersions observed in our spectrum. With this, we predict a transition between type-I and type-II Weyl fermions with do** and resolve its disparate quantum oscillation experiments, thus highlighting the critical roles of Coulomb interactions in layered Weyl semimetals. △ Less

Submitted 13 October, 2021; v1 submitted 10 October, 2021; originally announced October 2021.

Journal ref: Phys. Rev. B 105, 045143 (2022)

Large remnant polarization in a wake-up free Hf0.5Zr0.5O2 ferroelectric film

Authors: Alireza Kashir, Hyung Woo Kim, Seungyeol Oh, Hyunsang Hwang

Abstract: A wake-up free Hf0.5Zr0.5O2 (HZO) ferroelectric film with the highest remnant polarization (Pr) value to-date was achieved through tuning of the ozone pulse duration, the annealing process, and the metal/insulator interface. The ozone dosage during the atomic layer deposition of HZO films appears to be a crucial parameter in suppressing the mechanisms driving the wake-up effect. A tungsten cap**… ▽ More A wake-up free Hf0.5Zr0.5O2 (HZO) ferroelectric film with the highest remnant polarization (Pr) value to-date was achieved through tuning of the ozone pulse duration, the annealing process, and the metal/insulator interface. The ozone dosage during the atomic layer deposition of HZO films appears to be a crucial parameter in suppressing the mechanisms driving the wake-up effect. A tungsten cap** electrode with a relatively low thermal expansion coefficient enables the induction of an in-plane tensile strain, which increases the formation of the orthorhombic phase while decreasing the formation of the monoclinic phase during the cooling step of the annealing process. Therefore, increasing the annealing temperature TA followed by rapid cooling to room temperature resulted in a substantial increase in the 2Pr value (64 uC/cm2). However, the leakage current increased considerably, which can affect the performance of metal-insulator-metal (MIM) devices. To reduce the leakage current while maintaining the mechanical stress during thermal annealing, a 10 nm Pt layer was inserted between the W/HZO bottom interface. This resulted in a ~ 20-fold decrease in the leakage current while the 2Pr value remained almost constant (~ 60 uC/cm2). The increase in barrier height at the Pt/HZO interface compared to that of the W/HZO interface coupled with the suppression of the formation of interfacial oxides (WOx) by the introduction of a Pt/HZO interface serves to decrease the leakage current. △ Less

Submitted 13 January, 2021; originally announced January 2021.

Transfer Learning by Cascaded Network to identify and classify lung nodules for cancer detection

Authors: Shah B. Shrey, Lukman Hakim, Muthusubash Kavitha, Hae Won Kim, Takio Kurita

Abstract: Lung cancer is one of the most deadly diseases in the world. Detecting such tumors at an early stage can be a tedious task. Existing deep learning architecture for lung nodule identification used complex architecture with large number of parameters. This study developed a cascaded architecture which can accurately segment and classify the benign or malignant lung nodules on computed tomography (CT… ▽ More Lung cancer is one of the most deadly diseases in the world. Detecting such tumors at an early stage can be a tedious task. Existing deep learning architecture for lung nodule identification used complex architecture with large number of parameters. This study developed a cascaded architecture which can accurately segment and classify the benign or malignant lung nodules on computed tomography (CT) images. The main contribution of this study is to introduce a segmentation network where the first stage trained on a public data set can help to recognize the images which included a nodule from any data set by means of transfer learning. And the segmentation of a nodule improves the second stage to classify the nodules into benign and malignant. The proposed architecture outperformed the conventional methods with an area under curve value of 95.67\%. The experimental results showed that the classification accuracy of 97.96\% of our proposed architecture outperformed other simple and complex architectures in classifying lung nodules for lung cancer detection. △ Less

Submitted 24 September, 2020; originally announced September 2020.

Symmetry dictated grain boundary state in a two-dimensional topological insulator

Authors: Hyo Won Kim, Seoung-Hun Kang, Hyun-Jung Kim, Kisung Chae, Suyeon Cho, Wonhee Ko, Se Hwang Kang, Heejun Yang, Sung Wng Kim, Seongjun Park, Sung Woo Hwang, Young-Kyun Kwon, Young-Woo Son

Abstract: Structural imperfections such as grain boundaries (GBs) and dislocations are ubiquitous in solids and have been of central importance in understanding nature of polycrystals. In addition to their classical roles, advent of topological insulators (TIs) offers a chance to realize distinct topological states bound to them. Although dislocation inside three-dimensional TIs is one of the prime candidat… ▽ More Structural imperfections such as grain boundaries (GBs) and dislocations are ubiquitous in solids and have been of central importance in understanding nature of polycrystals. In addition to their classical roles, advent of topological insulators (TIs) offers a chance to realize distinct topological states bound to them. Although dislocation inside three-dimensional TIs is one of the prime candidates to look for, its direct detection and characterization are challenging. Instead, in two-dimensional (2D) TIs, their creations and measurements are easier and, moreover, topological states at the GBs or dislocations intimately connect to their lattice symmetry. However, such roles of crystalline symmetries of GBs in 2D TIs have not been clearly measured yet. Here, we present the first direct evidence of a symmetry enforced Dirac type metallic state along a GB in 1T'-MoTe$_2$, a prototypical 2D TI. Using scanning tunneling microscope, we show a metallic state along a grain boundary with non-symmorphic lattice symmetry and its absence along the other boundary with symmorphic one. Our large scale atomistic simulations demonstrate hourglass like nodal-line semimetallic in-gap states for the former while the gap-opening for the latter, explaining our observation very well. The protected metallic state tightly linked to its crystal symmetry demonstrated here can be used to create stable metallic nanowire inside an insulator. △ Less

Submitted 5 July, 2019; v1 submitted 4 July, 2019; originally announced July 2019.

Journal ref: Nano Letters 20(8), 5837-5843 (2020)

THz-Pump and X-Ray-Probe Sources Based on an Electron Linac

Authors: Sadiq Setiniyaz, Seong Hee Park, Hyun Woo Kim, Nikolay A. Vinokurov, Kyu-Ha Jang, Kitae Lee, In Hyung Baek, Young Uk Jeong

Abstract: We describe a compact THz-pump and X-ray-probe beamline, based on an electron linac, for ultrafast time-resolved diffraction applications. Two high-energy electron ($γ>50$) bunches, $5~$ns apart, im**e upon a single-foil or a multifoil radiator and generate THz radiation and X-rays simultaneously. The THz pulse from the first bunch is synchronized to the X-ray beam of the second bunch by using a… ▽ More We describe a compact THz-pump and X-ray-probe beamline, based on an electron linac, for ultrafast time-resolved diffraction applications. Two high-energy electron ($γ>50$) bunches, $5~$ns apart, im**e upon a single-foil or a multifoil radiator and generate THz radiation and X-rays simultaneously. The THz pulse from the first bunch is synchronized to the X-ray beam of the second bunch by using an adjustable optical delay of THz pulse. The peak power of THz radiation from the multifoil radiator is estimated to be $0.14~$GW for a $200~$pC well-optimized electron bunch. GEANT4 simulations show a carbon foil with thickness of $0.5~-~1.0~$mm has the highest yield of $10~-~20~$keV hard X-rays for a $25~$MeV beam, which is approximately $10^3$ photons/(keV pC-electrons) within a few degrees of the polar angle. A carbon multifoil radiator with $35$ foils ($25~$$μm~$thick each) can generate close to $10^3$ hard X-rays/(keV pC-electrons) within a $2^\circ$ acceptance angle. With $200~$pC charge and $100~$Hz repetition rate, we can generate $10^7$ X-rays per $1~$keV energy bin per second or $10^5$ X-rays per $1~$keV energy bin per pulse. The longitudinal time profile of X-ray pulse ranges from $400~-~600~$fs depending on the acceptance angle. The broadening of the time duration of X-ray pulse is observed owing to its diverging effect. A double-crystal monochromator (DCM) will be used to select and transport the desired X-rays to the sample. The heating of the radiators by an electron beam is negligible because of the low beam current. △ Less

Submitted 20 November, 2017; originally announced November 2017.

Comments: 10 pages, 17 figures

Journal ref: Review of Scientific Instruments 88, 113306 (2017)

On Graphs and the Gotsman-Linial Conjecture for d = 2

Authors: Hyo Won Kim, Chris Maldonado, Jake Wellens

Abstract: We give an infinite class of counterexamples to the Gotsman-Linial conjecture when d = 2. On the other hand, we establish an asymptotic form of the conjecture for quadratic threshold functions whose non-zero quadratic terms define a graph with either low fractional chromatic number or few edges. Our techniques are elementary and our exposition is self-contained, if you're into that. We give an infinite class of counterexamples to the Gotsman-Linial conjecture when d = 2. On the other hand, we establish an asymptotic form of the conjecture for quadratic threshold functions whose non-zero quadratic terms define a graph with either low fractional chromatic number or few edges. Our techniques are elementary and our exposition is self-contained, if you're into that. △ Less

Submitted 19 September, 2017; originally announced September 2017.

Comments: 15 pages

Beam Characterization at the KAERI UED Beamline

Authors: Sadiq Setiniyaz, Hyun Woo Kim, In-Hyung Baek, **hee Nam, MoonSik Chae, Byung-Heon Han, Boris Gudkov, Kyu Ha Jang, Sunjeong Park, Sergey Miginsky, Nikolay Vinokurov, Young Uk Jeong

Abstract: The UED (ultrafast electron diffraction) beamline of the KAERI's (the Korea Atomic Energy Research Institute's) WCI (World Class Institute) Center has been successfully commissioned. We have measured the beam emittance by using the quadrupole scan technique and the charge by using a novel measurement system we have developed. In the quadrupole scan, a larger drift distance between the quadrupole a… ▽ More The UED (ultrafast electron diffraction) beamline of the KAERI's (the Korea Atomic Energy Research Institute's) WCI (World Class Institute) Center has been successfully commissioned. We have measured the beam emittance by using the quadrupole scan technique and the charge by using a novel measurement system we have developed. In the quadrupole scan, a larger drift distance between the quadrupole and the screen is preferred because it gives a better thin-lens approximation. A high bunch-charge beam, however, will undergo emittance growth in the long drift caused by the space-charge force. We present a method that mitigates this growth by introducing a quadrupole scan with a short drift and without using the thin-lens approximation. The quadrupole in this method is treated as a thick lens, and the emittance is extracted by using the thick-lens equations. Apart from being precise, our method can be readily applied without making any change to the beamline and has no need for a big drift space. For charge measurement, we have developed a system consisting of an in-air Faraday cup (FC) and a preamplifier. Tests performed utilizing 3.3-MeV electrons show that the system was able to measure bunches with pulse durations of tens of femtoseconds at 10 fC sensitivity. △ Less

Submitted 6 October, 2016; originally announced October 2016.

Comments: published on JKPS: http://link.springer.com/article/10.3938/jkps.69.1019#aboutarticle

Journal ref: Journal of the Korean Physical Society (2016) 69: 1019

Soft X-ray Absorption Spectroscopy Study of Multiferroic Bi-substituted Ba(1-x)Bi(x)Ti(0.9)Fe(0.1)O(3)

Authors: Hyun Woo Kim, D. H. Kim, Eunsook Lee, Seungho Seong, Deok Hyeon Kim, B. W. Lee, Y. Ko, J. -Y. Kim, J. -S. Kang

Abstract: The electronic structures of multiferroic oxides of Ba(1-x)Bi(x)Ti(0.9)Fe(0.1)O(3) (0 < x < 0.12) have been investigated by employing photoemission spectroscopy and soft x-ray absorption spectroscopy (XAS). The measured Fe and Ti 2p XAS spectra show that Ti ions are in the Ti4+ states for all x and that Fe ions are Fe2+-Fe3+ mixed-valent for x > 0. The valence states of Fe ions are found to be nea… ▽ More The electronic structures of multiferroic oxides of Ba(1-x)Bi(x)Ti(0.9)Fe(0.1)O(3) (0 < x < 0.12) have been investigated by employing photoemission spectroscopy and soft x-ray absorption spectroscopy (XAS). The measured Fe and Ti 2p XAS spectra show that Ti ions are in the Ti4+ states for all x and that Fe ions are Fe2+-Fe3+ mixed-valent for x > 0. The valence states of Fe ions are found to be nearly trivalent for x=0, and decreases with increasing x from being nearly trivalent (v(Fe)~ 3) for x=0 to v(Fe)~ 2.6 for x=0.12. The valence states of both Ti and Ba ions do not change for all x < 0.12. Based on the obtained valence states of Fe ions, the electronic and magnetic properties of Ba(1-x)Bi(x)Ti(0.9)Fe(0.1)O(3) are explored. △ Less

Submitted 22 May, 2016; originally announced May 2016.

Comments: 9 pages, 3 figures

The Physics of the B Factories

Authors: A. J. Bevan, B. Golob, Th. Mannel, S. Prell, B. D. Yabsley, K. Abe, H. Aihara, F. Anulli, N. Arnaud, T. Aushev, M. Beneke, J. Beringer, F. Bianchi, I. I. Bigi, M. Bona, N. Brambilla, J. B rodzicka, P. Chang, M. J. Charles, C. H. Cheng, H. -Y. Cheng, R. Chistov, P. Colangelo, J. P. Coleman, A. Drutskoy , et al. (2009 additional authors not shown)

Abstract: This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary… ▽ More This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026. △ Less

Submitted 31 October, 2015; v1 submitted 24 June, 2014; originally announced June 2014.

Comments: 928 pages, version 3 (arXiv:1406.6311v3) corresponds to the alpha, beta, gamma version of the book, the other versions use the phi1, phi2, phi3 notation

Report number: SLAC-PUB-15968, KEK Preprint 2014-3

Journal ref: Eur. Phys. J. C74 (2014) 3026

Measurement of the Mass Difference Between Top and Anti-top Quarks at CDF

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: We present a measurement of the mass difference between top ($t$) and anti-top ($\bar{t}$) quarks using $t\bar{t}$ candidate events reconstructed in the final state with one lepton and multiple jets. We use the full data set of Tevatron $\sqrt{s} = 1.96$ TeV proton-antiproton collisions recorded by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb$^{-1}$. We estimate event-b… ▽ More We present a measurement of the mass difference between top ($t$) and anti-top ($\bar{t}$) quarks using $t\bar{t}$ candidate events reconstructed in the final state with one lepton and multiple jets. We use the full data set of Tevatron $\sqrt{s} = 1.96$ TeV proton-antiproton collisions recorded by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb$^{-1}$. We estimate event-by-event the mass difference to construct templates for top-quark signal events and background events. The resulting mass difference distribution of data compared to signal and background templates using a likelihood fit yields $ΔM_{top} = {M}_{t} - {M}_{\bar{t}} = -1.95 $pm$ 1.11 (stat) $pm$ 0.59 (syst)$ and is in agreement with the standard model prediction of no mass difference. △ Less

Submitted 28 January, 2013; v1 submitted 23 October, 2012; originally announced October 2012.

Comments: Accepted in Phys. Rev. D

Report number: FERMILAB-PUB-12-577-E

Journal ref: Phys. Rev. D 87, 052013 (2013)

Search for the Higgs boson in the all-hadronic final state using the full CDF data set

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (491 additional authors not shown)

Abstract: This paper reports the result of a search for the standard model Higgs boson in events containing four reconstructed jets associated with quarks. For masses below 135GeV/c2, Higgs boson decays to bottom-antibottom quark pairs are dominant and result primarily in two hadronic jets. An additional two jets can be produced in the hadronic decay of a W or Z boson produced in association with the Higgs… ▽ More This paper reports the result of a search for the standard model Higgs boson in events containing four reconstructed jets associated with quarks. For masses below 135GeV/c2, Higgs boson decays to bottom-antibottom quark pairs are dominant and result primarily in two hadronic jets. An additional two jets can be produced in the hadronic decay of a W or Z boson produced in association with the Higgs boson, or from the incoming quarks that produced the Higgs boson through the vector-boson fusion process. The search is performed using a sample of \sqrt{s} = 1.96 TeV proton-antiproton collisions corresponding to an integrated luminosity of 9.45 fb-1 recorded by the CDF II detector. The data are in agreement with the background model and 95% credibility level upper limits on Higgs boson production are set as a function of the Higgs boson mass. The median expected (observed) limit for a 125GeV/c2 Higgs boson is 11.0 (9.0) times the predicted standard model rate. △ Less

Submitted 29 November, 2012; v1 submitted 31 August, 2012; originally announced August 2012.

Comments: Submitted to Journal of High Energy Physics

Report number: FERMILAB-PUB-12-493-E

Precision Top-Quark Mass Measurements at CDF

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: We present a precision measurement of the top-quark mass using the full sample of Tevatron $\sqrt{s}=1.96$ TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of 8.7 $fb^{-1}$. Using a sample of $t\bar{t}$ candidate events decaying into the lepton+jets channel, we obtain distributions of the top-quark masses and the invariant mass of two jet… ▽ More We present a precision measurement of the top-quark mass using the full sample of Tevatron $\sqrt{s}=1.96$ TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of 8.7 $fb^{-1}$. Using a sample of $t\bar{t}$ candidate events decaying into the lepton+jets channel, we obtain distributions of the top-quark masses and the invariant mass of two jets from the $W$ boson decays from data. We then compare these distributions to templates derived from signal and background samples to extract the top-quark mass and the energy scale of the calorimeter jets with {\it in situ} calibration. The likelihood fit of the templates from signal and background events to the data yields the single most-precise measurement of the top-quark mass, $\mtop = 172.85 $\pm$ 0.71 (stat) $\pm$ 0.85 (syst) GeV/c^{2}.$ △ Less

Submitted 29 July, 2012; originally announced July 2012.

Comments: submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-12-416-E

Journal ref: Phys. Rev. Lett. 109, 152003 (2012)

An inclusive search for the Higgs boson in the four-lepton final state at CDF

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: An inclusive search for the standard model Higgs boson using the four-lepton final state in proton-antiproton collisions produced by the Tevatron at sqrt(s) = 1.96 TeV is conducted. The data are recorded by the CDF II detector and correspond to an integrated luminosity of 9.7 /fb. Three distinct Higgs decay modes, namely ZZ, WW, and tau-tau, are simultaneously probed. Nine potential signal events… ▽ More An inclusive search for the standard model Higgs boson using the four-lepton final state in proton-antiproton collisions produced by the Tevatron at sqrt(s) = 1.96 TeV is conducted. The data are recorded by the CDF II detector and correspond to an integrated luminosity of 9.7 /fb. Three distinct Higgs decay modes, namely ZZ, WW, and tau-tau, are simultaneously probed. Nine potential signal events are selected and found to be consistent with the background expectation. We set a 95% credibility limit on the production cross section times the branching ratio and subsequent decay to the four lepton final state for hypothetical Higgs boson masses between 120 GeV/c^2 and 300 GeV/c^2. △ Less

Submitted 20 July, 2012; originally announced July 2012.

Comments: 8 pages, 3 figures

Report number: FERMILAB-PUB-12-399-E

Search for a low mass Standard Model Higgs boson in the tau-tau decay channel in $p\bar{p}$ collisions at $\sqrt{s}$ = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (491 additional authors not shown)

Abstract: We report on a search for the standard model Higgs boson decaying into pairs of tau leptons in $p\bar{p}$ collisions produced by the Tevatron at $\sqrt{s}$ = 1.96 TeV. The analyzed data sample was recorded by the CDFII detector and corresponds to an integrated luminosity of 6.0 fb$^{-1}$. The search is performed in the final state with one tau decaying leptonically and the second one identified th… ▽ More We report on a search for the standard model Higgs boson decaying into pairs of tau leptons in $p\bar{p}$ collisions produced by the Tevatron at $\sqrt{s}$ = 1.96 TeV. The analyzed data sample was recorded by the CDFII detector and corresponds to an integrated luminosity of 6.0 fb$^{-1}$. The search is performed in the final state with one tau decaying leptonically and the second one identified through its semi-hadronic decay.Since no significant excess is observed, a 95% credibility level upper limit on the production cross section times branching ratio to the tau-tau final state is set for hypothetical Higgs boson masses between 100 and 150 GeV/$c^2$. For a Higgs boson of 120 GeV/$c^2$ the observed (expected) limit is 14.6 (15.3) the predicted value. △ Less

Submitted 23 January, 2012; originally announced January 2012.

Comments: 8 pages, 3 figures, submitted to Phys. Rev. Lett

Report number: PUB-12-017-E

Search for Standard Model Higgs Boson Production in Association with a W Boson Using a Matrix Element Technique at CDF in p-bar{p} Collisions at sqrt{s} = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (490 additional authors not shown)

Abstract: This paper presents a search for standard model Higgs boson production in association with a $W$ boson using events recorded by the CDF experiment in a dataset corresponding to an integrated luminosity of 5.6 fb-1. The search is performed using a matrix element technique in which the signal and background hypotheses are used to create a powerful discriminator. The discriminant output distributions… ▽ More This paper presents a search for standard model Higgs boson production in association with a $W$ boson using events recorded by the CDF experiment in a dataset corresponding to an integrated luminosity of 5.6 fb-1. The search is performed using a matrix element technique in which the signal and background hypotheses are used to create a powerful discriminator. The discriminant output distributions for signal and background are fit to the observed events using a binned likelihood approach to search for the Higgs boson signal. We find no evidence for a Higgs boson, and 95% confidence level (C.L.) upper limits are set on the Higgs boson production rate. The observed limits range from 3.5 to 37.6 relative to the standard model expectation for Higgs boson masses between 100 and 150 GeV. The 95% C.L. expected limit is estimated from the median of an ensemble of simulated experiments and varies between 2.9 and 32.7 relative to the production rate predicted by the standard model over the Higgs boson mass range studied. △ Less

Submitted 18 April, 2012; v1 submitted 19 December, 2011; originally announced December 2011.

Report number: FERMILAB-PUB-11-664-E

Journal ref: Phys. Rev. D. 85, 072001 (2012)

Measurement of ZZ production in leptonic final states at {\surd}s of 1.96 TeV at CDF

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: In this paper we present a precise measurement of the total ZZ production cross section in pp collisions at {\surd}s= 1.96 TeV, using data collected with the CDF II detector corresponding to an integrated luminosity of approximately 6 fb-1. The result is obtained by combining separate measurements in the four-charged (lll'l'), and two-charged-lepton and two-neutral-lepton (llvv) decay modes of the… ▽ More In this paper we present a precise measurement of the total ZZ production cross section in pp collisions at {\surd}s= 1.96 TeV, using data collected with the CDF II detector corresponding to an integrated luminosity of approximately 6 fb-1. The result is obtained by combining separate measurements in the four-charged (lll'l'), and two-charged-lepton and two-neutral-lepton (llvv) decay modes of the Z. The combined measured cross section for pp {\to} ZZ is 1.64^(+0.44)_(-0.38) pb. This is the most precise measurement of the ZZ production cross section in 1.96 TeV pp collisions to date. △ Less

Submitted 13 December, 2011; originally announced December 2011.

Comments: submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-11-656-E

Journal ref: Phys. Rev. Lett. 108, 101801 (2012)

Search for Standard Model Higgs Boson Production in Association with a W Boson at CDF

Authors: T. Aaltonen, B. Álvarez González, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (476 additional authors not shown)

Abstract: We present a search for the standard model Higgs boson production in association with a $W$ boson in proton-antiproton collisions ($p\bar{p}\rightarrow W^\pm H \rightarrow \ellνb\bar{b}$) at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector which correspond to an integrated luminosity of approximately 2.7 fb$^{-1}$. We recorded this data with two kinds… ▽ More We present a search for the standard model Higgs boson production in association with a $W$ boson in proton-antiproton collisions ($p\bar{p}\rightarrow W^\pm H \rightarrow \ellνb\bar{b}$) at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector which correspond to an integrated luminosity of approximately 2.7 fb$^{-1}$. We recorded this data with two kinds of triggers. The first kind required high-p$_T$ charged leptons and the second required both missing transverse energy and jets. The search selects events consistent with a signature of a single lepton ($e^\pm/μ^\pm$), missing transverse energy, and two jets. Jets corresponding to bottom quarks are identified with a secondary vertex tagging method and a jet probability tagging method. Kinematic information is fed in an artificial neural network to improve discrimination between signal and background. The search finds that both the observed number of events and the neural network output distributions are consistent with the standard model background expectations, and sets 95% confidence level upper limits on the production cross section times branching ratio. The limits are expressed as a ratio to the standard model production rate. The limits range from 3.6 (4.3 expected) to 61.1 (43.2 expected) for Higgs masses from 100 to 150 GeV/$c^{2}$, respectively. △ Less

Submitted 8 December, 2011; originally announced December 2011.

Journal ref: Phys.Rev.D 85 (2012) 052002

Search for new phenomena in events with two $Z$ bosons and missing transverse momentum in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: We present a search for new phenomena in events with two reconstructed $Z$ bosons and large missing transverse momentum, sensitive to processes $p\bar{p}\rightarrow X_2X_2 \rightarrow Z Z X_1 X_1$, where $X_2$ is an unstable particle decaying as $X_2\rightarrow ZX_1$ and $X_1$ is undetected. The particles $X_1$ and $X_2$ may be, among other possibilities, fourth generation neutrinos or supersymmet… ▽ More We present a search for new phenomena in events with two reconstructed $Z$ bosons and large missing transverse momentum, sensitive to processes $p\bar{p}\rightarrow X_2X_2 \rightarrow Z Z X_1 X_1$, where $X_2$ is an unstable particle decaying as $X_2\rightarrow ZX_1$ and $X_1$ is undetected. The particles $X_1$ and $X_2$ may be, among other possibilities, fourth generation neutrinos or supersymmetric particles. We study the final state in which one $Z$ boson decays to two charged leptons and the second decays hadronically. In data corresponding to an integrated luminosity of 4.2 fb$^{-1}$ from proton-antiproton collisions recorded by the CDF II detector at the Tevatron, with center-of-mass energy of 1.96 TeV, we find agreement between data and standard-model backgrounds. We calculate 95% confidence level upper limits on the cross section of the process $p\bar{p}\rightarrow X_2X_2 \rightarrow Z Z X_1 X_1$ ranging from 50 fb to 1 pb, depending on the masses of $X_1$ and $X_2$. △ Less

Submitted 7 December, 2011; originally announced December 2011.

Comments: 7 pages, 4 figures. Submitted Phys. Rev. D

Report number: FERMILAB-PUB-11-645-E

Journal ref: Phys. Rev. D 85, 011104(R) (2012)

Search for a Higgs Boson in the Diphoton Final State in p-pbar Collisions at sqrt(s) = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (490 additional authors not shown)

Abstract: A search for a narrow Higgs boson resonance in the diphoton mass spectrum is presented based on data corresponding to 7.0 fb^-1 of integrated luminosity from p-pbar collisions at sqrt(s) = 1.96 TeV collected by the CDF experiment. No evidence of such a resonance is observed, and upper limits are set on the cross section times branching ratio of the resonant state as a function of Higgs boson mass.… ▽ More A search for a narrow Higgs boson resonance in the diphoton mass spectrum is presented based on data corresponding to 7.0 fb^-1 of integrated luminosity from p-pbar collisions at sqrt(s) = 1.96 TeV collected by the CDF experiment. No evidence of such a resonance is observed, and upper limits are set on the cross section times branching ratio of the resonant state as a function of Higgs boson mass. The limits are interpreted in the context of the standard model and one fermiophobic benchmark model where the data exclude fermiophobic Higgs bosons with masses below 114 GeV/c^2 at a 95% Bayesian credibility level. △ Less

Submitted 21 December, 2011; v1 submitted 20 September, 2011; originally announced September 2011.

Comments: Submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-11-482-E-PPD

Search for WZ+ZZ production with MET + jets with b enhancement at sqrt(s) = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Álvarez Gonzálezv, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barriaee, P. Bartos, M. Baucecc , et al. (491 additional authors not shown)

Abstract: Diboson production ($WW+WZ+ZZ$) has been observed at the Tevatron in hadronic decay modes dominated by the $WW$ process. This paper describes the measurement of the cross section of $WZ$ and $ZZ$ events in final states with large $\mett$ and using $b$-jet identification as a tool to suppress $WW$ contributions. Due to the limited energy resolution, we cannot distinguish between partially hadronic… ▽ More Diboson production ($WW+WZ+ZZ$) has been observed at the Tevatron in hadronic decay modes dominated by the $WW$ process. This paper describes the measurement of the cross section of $WZ$ and $ZZ$ events in final states with large $\mett$ and using $b$-jet identification as a tool to suppress $WW$ contributions. Due to the limited energy resolution, we cannot distinguish between partially hadronic decays of $WZ$ and $ZZ$, and we measure the sum of these processes. The number of signal events is extracted using a simultaneous fit to the invariant mass distribution of the two jets for events with two $b$-jet candidates and events without two $b$-jet candidates. We measure a cross section $σ(p\bar{p}\to WZ,ZZ) = 5.8^{+3.6}_{-3.0}$ pb, in agreement with the standard model. △ Less

Submitted 13 January, 2012; v1 submitted 9 August, 2011; originally announced August 2011.

Comments: 10 pages, 5 figures

Report number: FERMILAB-PUB-11-375-E-PPD

Journal ref: Phys. Rev. D 85, 012002 (2012)

Measurement of the top-quark mass in the lepton+jets channel using a matrix element technique with the CDF II detector

Authors: CDF Collaboration, T. Aaltonen, B. Álvarez Gonzálezv, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barriaee, P. Bartos, M. Baucecc , et al. (490 additional authors not shown)

Abstract: A measurement of the top-quark mass is presented using Tevatron data from proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV collected with the CDF II detector. Events are selected from a sample of candidates for production of $t\bar t$ pairs that decay into the lepton+jets channel. The top-quark mass is measured with an unbinned maximum likelihood method where the event pro… ▽ More A measurement of the top-quark mass is presented using Tevatron data from proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV collected with the CDF II detector. Events are selected from a sample of candidates for production of $t\bar t$ pairs that decay into the lepton+jets channel. The top-quark mass is measured with an unbinned maximum likelihood method where the event probability density functions are calculated using signal and background matrix elements, as well as a set of parameterized jet-to-parton transfer functions. The likelihood function is maximized with respect to the top-quark mass, the signal fraction in the sample, and a correction to the jet energy scale (JES) calibration of the calorimeter jets. The simultaneous measurement of the JES correction ($\JES$) amounts to an additional \textit{in situ} jet energy calibration based on the known mass of the hadronically decaying $W$ boson. Using the data sample of 578 lepton+jets candidate events, corresponding to 3.2 $fb^{-1}$ of integrated luminosity, the top-quark mass is measured to be $m_t = \rm 172.4 \pm 1.4\:(stat+\JES) \pm 1.3\:(syst) GeV/{\it c}^2$. △ Less

Submitted 21 September, 2011; v1 submitted 8 August, 2011; originally announced August 2011.

Comments: 9 pages, 4 figures, 3 tables, accepted Phys. Rev. D Rapid Communications

Report number: FERMILAB-PUB-11-374-E-PPD

Journal ref: Phys. Rev. D 84, 071105(R) (2011)

Search for a Heavy Top-Like Quark in p\bar{p} Collisions at {\surd}s = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Álvarez Gonzálezv, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barriaee, P. Bartos, M. Baucecc , et al. (490 additional authors not shown)

Abstract: We present the results of a search for pair production of a heavy top-like (t') quark decaying to Wq final states using data corresponding to an integrated luminosity of 5.6 fb-1 collected by the CDF II detector in pp collisions at {\surd}s = 1.96 TeV. We perform parallel searches for t' \to Wb and t' \to Wq (where q is a generic down-type quark) in events containing a lepton and four or more jets… ▽ More We present the results of a search for pair production of a heavy top-like (t') quark decaying to Wq final states using data corresponding to an integrated luminosity of 5.6 fb-1 collected by the CDF II detector in pp collisions at {\surd}s = 1.96 TeV. We perform parallel searches for t' \to Wb and t' \to Wq (where q is a generic down-type quark) in events containing a lepton and four or more jets. By performing a fit to the two-dimensional distribution of total transverse energy versus reconstructed t quark mass, we set upper limits on the t \bar{t} production cross section and exclude a standard model fourth-generation t' quark decaying to W b (W q) with mass below 358 (340) GeV/c2 at 95% CL. △ Less

Submitted 4 November, 2011; v1 submitted 19 July, 2011; originally announced July 2011.

Comments: submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-11-333-E-PPD

Journal ref: Phys. Rev. Lett. 107, 261801 (2011)

Measurement of branching ratio and Bs0 lifetime in the decay Bs0 -> J/psi f0(980) at CDF

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (490 additional authors not shown)

Abstract: We present a study of Bs0 decays to the CP-odd final state J/psi f0(980) with J/psi -> mu+ mu- and f0(980) -> pi+ pi-. Using ppbar collision data with an integrated luminosity of 3.8/fb collected by the CDF II detector at the Tevatron we measure a Bs0 lifetime of tau(Bs0 -> J/psi f0(980)) = 1.70 -0.11+0.12(stat) +-0.03(syst) ps. This is the first measurement of the Bs0 lifetime in a decay to a CP… ▽ More We present a study of Bs0 decays to the CP-odd final state J/psi f0(980) with J/psi -> mu+ mu- and f0(980) -> pi+ pi-. Using ppbar collision data with an integrated luminosity of 3.8/fb collected by the CDF II detector at the Tevatron we measure a Bs0 lifetime of tau(Bs0 -> J/psi f0(980)) = 1.70 -0.11+0.12(stat) +-0.03(syst) ps. This is the first measurement of the Bs0 lifetime in a decay to a CP eigenstate and corresponds in the standard model to the lifetime of the heavy Bs0 eigenstate. We also measure the product of branching fractions of Bs0 -> J/psi f0(980) and f0(980) -> pi+ pi- relative to the product of branching fractions of Bs0 -> J/psi phi and phi -> K+ K- to be R_f0/phi = 0.257 +_0.020(stat) +-0.014(syst), which is the most precise determination of this quantity to date. △ Less

Submitted 12 September, 2011; v1 submitted 18 June, 2011; originally announced June 2011.

Comments: accepted by Phys. Rev. D

Report number: FERMILAB-PUB-11-279-E

Measurement of the Top Pair Production Cross Section in the Lepton + Jets Channel Using a Jet Flavor Discriminant

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (491 additional authors not shown)

Abstract: We present a new method to measure the top quark pair production cross section and the background rates with 2.7 fb$^{-1}$ of data from $p\bar{p}$ collisions at $\sqrt{s} =1.96$ TeV collected with the CDF II Detector. The size of the dataset was chosen to directly show the improvements of this new method. We select events with a single electron or muon, missing transverse energy, and at least one… ▽ More We present a new method to measure the top quark pair production cross section and the background rates with 2.7 fb$^{-1}$ of data from $p\bar{p}$ collisions at $\sqrt{s} =1.96$ TeV collected with the CDF II Detector. The size of the dataset was chosen to directly show the improvements of this new method. We select events with a single electron or muon, missing transverse energy, and at least one b-tagged jet. We perform a simultaneous fit to a jet flavor discriminant across nine samples defined by the number of jets and b-tags. We measure a top cross section of $σ_{t\bar{t}} = 7.64 \pm 0.57 \mathrm{(stat + syst)} \pm 0.45 \mathrm{(luminosity)}$ pb. An advantage of this approach is that many systematic uncertainties are measured in situ and inversely scale with integrated luminosity. △ Less

Submitted 20 September, 2011; v1 submitted 24 March, 2011; originally announced March 2011.

Comments: 7 pages 2 figures, published in PRD as a Rapid Communication, Aug 2011

Journal ref: Phys.Rev.D84:031101,2011

Search for New Dielectron Resonances and Randall-Sundrum Gravitons at the Collider Detector at Fermilab

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (489 additional authors not shown)

Abstract: A search for new dielectron mass resonances using data recorded by the CDF II detector and corresponding to an integrated luminosity of 5.7/fb is presented. No significant excess over the expected standard model prediction is observed. In this dataset, an event with the highest dielectron mass ever observed (960 GeV/c^2) was recorded. The results are interpreted in the Randall-Sundrum (RS) model.… ▽ More A search for new dielectron mass resonances using data recorded by the CDF II detector and corresponding to an integrated luminosity of 5.7/fb is presented. No significant excess over the expected standard model prediction is observed. In this dataset, an event with the highest dielectron mass ever observed (960 GeV/c^2) was recorded. The results are interpreted in the Randall-Sundrum (RS) model. Combined with the 5.4/fb diphoton analysis, the RS-graviton lower mass limit for the coupling k/\bar{M}_{Pl}=0.1 is 1058 GeV/c^2, making it the strongest limit to date. △ Less

Submitted 6 June, 2011; v1 submitted 23 March, 2011; originally announced March 2011.

Comments: 7 pages, 4 figures, 1 table

Journal ref: Phys.Rev.Lett.107:051801,2011

Studying the Underlying Event in Drell-Yan and High Transverse Momentum Jet Production at the Tevatron

Authors: The CDF Collaboration, T. Aaltonen, J. Adelman, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, A. Attal, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, G. Bauer , et al. (554 additional authors not shown)

Abstract: We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |η| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We u… ▽ More We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |η| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We use the direction of the lepton-pair (in Drell-Yan production) or the leading jet (in high-pT jet production) in each event to define three regions of η-φspace; toward, away, and transverse, where φis the azimuthal scattering angle. For Drell-Yan production (excluding the leptons) both the toward and transverse regions are very sensitive to the underlying event. In high-pT jet production the transverse region is very sensitive to the underlying event and is separated into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The data are corrected to the particle level to remove detector effects and are then compared with several QCD Monte-Carlo models. The goal of this analysis is to provide data that can be used to test and improve the QCD Monte-Carlo models of the underlying event that are used to simulate hadron-hadron collisions. △ Less

Submitted 16 March, 2010; originally announced March 2010.

Comments: Submitted to Phys.Rev.D

Report number: FERMILAB-PUB-10-053-E

Journal ref: Phys.Rev.D82:034001,2010